Cell-seeded 3D scaffolds as in vitro models for electroporation

Electroporation enhances cell death in 3D scaffold-based MDA-MB-231 cells treated with metformin

Triple-negative breast cancer (TNBC), the most aggressive subtype of breast cancer lacks estrogen, progesterone, and HER2 receptors and hence, is therapeutically challenging. Towards this, we studied an alternate therapy by repurposing metformin (FDA-approved type-2 diabetic drug with anticancer properties) in a 3D-scaffold culture, with electrical pulses. 3D cell culture was used to simulate the tumor microenvironment more closely and MDA-MB-231, human TNBC cells, treated with both 5 mM metformin (Met) and 8 electrical pulses at 2500 V/cm, 10 µs (EP1) and 800 V/cm, 100 µs (EP2) at 1 Hz were studied in 3D and 2D. They were characterized using cell viability, reactive oxygen species (ROS), glucose uptake, and lactate production assays at 24 h. Cell viability, as low as 20 % was obtained with EP1 + 5 mM Met. They exhibited 1.65-fold lower cell viability than 2D with EP1 + 5 mM Met. ROS levels indicated a 2-fold increase in oxidative stress for EP1 + 5 mM Met, while the glucose uptake was limited to only 9 %. No significant change in the lactate production indicated glycolytic arrest and a non-conducive environment for MDA-MB-231 growth. Our results indicate that 3D cell culture, with a more realistic tumor environment that enhances cell death using metformin and electrical pulses could be a promising approach for TNBC therapeutic intervention studies.

Structural Functions of 3D-Printed Polymer Scaffolds in Regulating Cell Fates and Behaviors for Repairing Bone and Nerve Injuries

Tissue repair and regeneration, such as bone and nerve restoration, face significant challenges due to strict regulations within the immune microenvironment, stem cell differentiation, and key cell behaviors. The development of 3D scaffolds is identified as a promising approach to address these issues via the efficiently structural regulations on cell fates and behaviors. In particular, 3D-printed polymer scaffolds with diverse micro-/nanostructures offer a great potential for mimicking the structures of tissue. Consequently, they are foreseen as promissing pathways for regulating cell fates, including cell phenotype, differentiation of stem cells, as well as the migration and the proliferation of key cells, thereby facilitating tissue repairs and regenerations. Herein, the roles of structural functions of 3D-printed polymer scaffolds in regulating the fates and behaviors of numerous cells related to tissue repair and regeneration, along with their specific influences are highlighted. Additionally, the challenges and outlooks associated with 3D-printed polymer scaffolds with various structures for modulating cell fates are also discussed.

Bottlenose dolphin (Tursiops truncatus) immortalized fibroblasts on novel 3D in vitro collagen-free scaffolds

Dolphins, as apex predators, can be considered relevant sentinels of the health of marine ecosystems. The creation of 3D cell models to assess in vitro cell-to-cell and cell-to-matrix interactions in environmental-mimicking conditions, is of considerable interest. However, to date the establishment of cetacean 3D culture systems has not yet been accomplished. Thus, in this study, different 3D systems of bottlenose dolphin (Tursiops truncatus) skin fibroblasts have been analyzed. Particularly, novel scaffolds based on hyaluronic acid and ionic-complementary self-assembling peptides such as RGD-EAbuK and EAbuK-IKVAV have been compared to Matrigel. Histological and fluorescent staining, electron microscopy (TEM) analyses and viability assays have been performed and RT-PCR has been used to detect extracellular matrix (ECM) components produced by cells. Results showed that Matrigel induced cells to form aggregates with lower viability and no ECM production compared to the novel scaffolds. Moreover, scaffolds allowed dispersed cells to produce a collagenous ECM containing collagen1a1, laminin B1 and elastin. The HA-EAbuK-IKVAV scaffold resulted in the most suitable 3D model in terms of cell quantity and viability. The development of this innovative approach is the first step towards the possibility to create 3D in vitro models for this protected species.

Development of 3D melanoma cultures on a hyaluronic acid-based scaffold with synthetic self-assembling peptides: Electroporation enhancement

Electrochemotherapy (ECT) with bleomycin is an effective antitumor treatment. Still, researchers are investigating new drugs and electroporation conditions to improve its efficacy. To this aim, in vivo assays are accurate but expensive and ethically questionable. Conversely, in vitro assays, although cheaper and straightforward, do not reflect the architecture of the biological tissue because they lack a tridimensional (3D) structure (as in the case of two-dimensional [2D] in vitro assays) or do not include all the extracellular matrix components (as in the case of 3D in vitro scaffolds). To address this issue, 3D in vitro models have been proposed, including spheroids and hydrogel-based cultures, which require a suitable low-conductive medium to allow cell membrane electroporation. In this study, a synthetic scaffold based on hyaluronic acid (HA) and self-assembling peptides (SAPs; EAbuK), condensed with a Laminin-derived adhesive sequence (IKVAV), is proposed as a reliable alternative. We compare SKMEL28 cells cultured in the HA-EAbuK-IKVAV scaffold to the control (HA only scaffold). Three days after seeding, the culture on the HA-EAbuK-IKVAV scaffold showed collagen production. SKMEL28 cells cultured on the HA-EAbuK-IKVAV scaffold started to be electroporated at 400 V/cm, whereas, at the same electric field intensity, those cultured on HA were not. As a reference, 2D experiments showed that electroporation of SKMEL28 cells starts at 600 V/cm using an electroporation buffer and at 800 V/cm in a culture medium, but with very low efficiency (<50 % of cells electroporated). 3D cultures on HA-EAbuK-IKVAV allowed the simulation of a more reliable microenvironment and may represent a valuable tool for studying electroporation conditions. Using Finite Element Analysis (FEA) to compute the transmembrane potential, we detected the influence of inhomogeneity of the extracellular matrix on electroporation effect. Our 3D cell culture electroporation simulations showed that the transmembrane potential increased when collagen surrounded the cells. Of note, in the collagen-enriched HA-EAbuK-IKVAV scaffold, EP was already improved at lower electric field intensities. This study shows the influence of the extracellular matrix on electric conductivity and electric field distribution on cell membrane electroporation and supports the adoption of more reliable 3D scaffolds in experimental electroporation studies.

Liver-tumor mimics as a potential translational framework for planning and testing irreversible electroporation with multiple electrodes

Irreversible electroporation (IRE) has emerged as an appealing non-ionizing, non-thermal ablation therapy, independent of antineoplastic drugs. Limited but successful outcomes in IRE conducted in vivo, in small focal hepatocellular carcinomas (HCC), have been reported. Nonetheless, the electric parameters of IRE are usually delivered in an unplanned manner. This work investigates the integration of computational modeling to hydrogels mimicking the HCC microenvironment, as a powerful framework to: circumvent ethical concerns of in vivo experimentation; safely tune the electric parameters reaching the IRE electric field threshold; and propel the translation of IRE as a routine clinical alternative to the treatment of HCC. Therefore, a parametric study served to evaluate the effects of the pulse amplitude, the number of pulses and electrodes, the treatment time, the hydrogel-tumor size, and the cell type. The ablation extent was surveyed by confocal microscopy and magnetic resonance imaging (MRI) in cylindrical and realistic tumor-shaped hydrogels, respectively. A large ablation (70%-100%) was verified in all constructs.

In situ transient transfection of 3D cell cultures and tissues, a promising tool for tissue engineering and gene therapy

Various research fields use the transfection of mammalian cells with genetic material to induce the expression of a target transgene or gene silencing. It is a tool widely used in biological research, bioproduction, and therapy. Current transfection protocols are usually performed on 2D adherent cells or suspension cultures. The important rise of new gene therapies and regenerative medicine in the last decade raises the need for new tools to empower the in situ transfection of tissues and 3D cell cultures. This review will present novel in situ transfection methods based on a chemical or physical non-viral transfection of cells in tissues and 3D cultures, discuss the advantages and remaining gaps, and propose future developments and applications.

Finite Element Evaluation of the Electric Field Distribution in a Non-Homogeneous Environment

Finite element analysis is used in this study to investigate the effect of media inhomogeneity on the electric field distribution in a sample composed of cells and their extracellular matrix. The sample is supposed to be subjected to very high pulsed electric field. Numerically computed electric field distribution and transmembrane potential at the cell membrane in electroporation conditions are considered in order to study cell behavior at different degrees of inhomogeneity. The different inhomogeneity grade is locally obtained using a representative model of fixed volume with cell-cell distance varying in the range of 1-283 um. The conductivity of the extracellular medium was varied between plain collagen and a gel-like myxoid matrix through combinations of the two, i.e., collagen and myxoid. An increase in the transmembrane potential was shown in the case of higher aggregate. The results obtained in this study show the effect of the presence of the cell aggregates and collagen on the transmembrane potential. In particular, by increasing the cell aggregation in the two cases, the transmembrane potential increased. Finally, the simulation results were compared to experimental data obtained by culturing HCC1954 cells in a hyaluronic acid-based scaffold. The experimental validation confirmed the behavior of the transmembrane potential in presence of the collagen: an increase in electroporation at a lower electric field intensity was found for the cells cultured in the scaffolds where there is the formation of collagen areas.

Advancements in Three Dimensional In-Vitro Cell Culture Models

The scientific field is observing a gradual shift from monolayer cultures to three-dimensional (3D) models, as they give a more relevant data in pre-clinical stages. This review summarizes the major techniques and materials used to develop 3D platforms, especially for cancer. It also discusses the challenges and some unresolved issues of the field and highlights some techniques that have made it to the market.

Gene electrotransfer of FGF2 enhances collagen scaffold biocompatibility

Tendon injuries are a common athletic injury that have been increasing in prevalence. While there are current clinical treatments for tendon injuries, they have relatively long recovery times and often do not restore native function of the tendon. In the current study, gene electrotransfer (GET) parameters for delivery to the skin were optimized with monophasic and biphasic pulses with reporter and effector genes towards optimizing underlying tendon healing. Tissue twitching and damage, as well as gene expression and distribution were evaluated. Bioprinted collagen scaffolds, mimicking healthy tendon structure were then implanted subcutaneously for biocompatibility and angiogenesis analyses when combined with GET to accelerate healing. GET of human fibroblast FGF2 significantly increased angiogenesis and biocompatibility of the bioprinted implants when compared to implant only sites. The combination of bioprinted collagen fibers and angiogenic GET therapy may lead to better graft biocompatibility in tendon repair.

The electrical pulse application enhances intra-cellular localization and potentiates cytotoxicity of curcumin in breast cancer cells

Breast cancer is the most common cancer of women, and fifth leading cause of mortality worldwide. Existing breast cancer regimens are costly and produce severe side effects. This highlights a need for the development of efficient novel therapies, which are cost effective and limit side effects. An electrical pulse (EP)-based chemo therapy, known as electrochemotherapy (ECT) using the natural compound curcumin could be an effective alternative. ECT is a non-surgical modality, which produces excellent anti-tumor efficacy at small drug concentrations due to increased uptake of drugs. In clinics, ECT is shown to be effective in treating advanced, recurrent, and metastatic breast cancers, which are refractory to multiple modalities. ECT with curcumin triggers apoptotic cell death in breast cancer cells and could be an effective alternative, due to curcumin's low cost and reduced side-effects. However, there is a lack of studies quantifying the uptake of curcumin in response to EP application. Towards this, we determined the uptake of different curcuminoids (curcumin, desmethoxycurcumin, and bisdemethoxycurcumin) upon EP application and their impact on cell cytotoxicity. Additionally, we studied the combined effect of calcium chloride (CaCl₂) and a curcuminoids (Cur) mixture, based on initial studies suggesting calcium electroporation as a potential inexpensive anti-cancer treatment. Our results indicate EP with Cur increases cellular uptake, cell shrinkage, and cytotoxicity. The EP + Cur resulted in the highest uptake of the bisdemethoxycurcumin. Further, EP also potentiated the cytotoxicity of CaCl₂ and of the Cur and CaCl₂ combination against breast cancer cells and caused apoptosis. Our preliminary data pave the way to further studies on Cur and CaCl₂ combination treating breast cancer.

Hydrogels to engineer tumor microenvironments in vitro

Illustration of engineered hydrogel to recapitulate aspects of the tumor microenvironment.

Breast cancer cells grown on hyaluronic acid-based scaffolds as 3D in vitro model for electroporation

Nowadays, electroporation (EP) represents a promising method for the intracellular delivery of anticancer drugs. To setting up the process, the EP efficiency is usually evaluated by using cell suspension and adherent cell cultures that are not representative of the in vivo conditions. Indeed, cells are surrounded by extracellular matrix (ECM) whose composition and physical characteristics are different for each tissue. So, various three-dimensional (3D) in vitro models, such as spheroids and hydrogel-based cultures, have been proposed to mimic the tumour microenvironment. Herein, a 3D breast cancer in vitro model has been proposed. HCC1954 cells were seeded on crosslinked and lyophilized matrices composed of hyaluronic acid (HA) and ionic complementary self-assembling peptides (SAPs) already known to provide a fibrous structure mimicking collagen network. Herein, SAPs were functionalized with laminin derived IKVAV adhesion motif. Cultures were characterized by spheroids surrounded by ECM produced by cancer cells as demonstrated by collagen1a1 and laminin B1 transcripts. EP was carried out on both 2D and 3D cultures: a sequence of 8 voltage pulses at 5 kHz with different amplitude was applied using a plate electrode. Cell sensitivity to EP seemed to be modulated by the presence of ECM and the different cell organization. Indeed, cells cultured on HA-IKVAV were more sensitive than those treated in 2D and HA cultures, in terms of both cell membrane permeabilization and viability. Collectively, our results suggest that HA-IKVAV cultures may represent an interesting model for EP studies. Further studies will be needed to elucidate the influence of ECM composition on EP efficiency.

Spheroids of Endothelial Cells and Vascular Smooth Muscle Cells Promote Cell Migration in Hyaluronic Acid and Fibrinogen Composite Hydrogels

Cell migration plays a pivotal role in many pathological and physiological processes. So far, most of the studies have been focused on 2-dimensional cell adhesion and migration. Herein, the migration behaviors of cell spheroids in 3D hydrogels obtained by polymerization of methacrylated hyaluronic acid (HA-MA) and fibrinogen (Fg) with different ratios were studied. The Fg could be released to the medium gradually along with time prolongation, achieving the dynamic change of hydrogel structures and properties. Three types of cell spheroids, i.e., endothelial cell (EC), smooth muscle cell (SMC), and EC-SMC spheroids, were prepared with 10,000 cells in each, whose diameters were about 343, 108, and 224 μm, respectively. The composite hydrogels with an intermediate ratio of Fg allowed the fastest 3D migration of cell spheroids. The ECs-SMCs migrated longest up to 3200 μm at day 14, whereas the SMC spheroids migrated slowest with a distance of only ~400 μm at the same period of time. The addition of free RGD or anti-CD44 could significantly reduce the migration distance, revealing that the cell-substrate interactions take the major roles and the migration is mesenchymal dependent. Moreover, addition of anti-N-cadherin and MMP inhibitors also slowed down the migration rate, demonstrating that the degradation of hydrogels and cell-cell interactions are also largely involved in the cell migration. RT-PCR measurement showed that expression of genes related to cell adhesion and antiapoptosis, and angiogenesis was all upregulated in the EC-SMC spheroids than single EC or SMC spheroids, suggesting that the use of composite cell spheroids is more promising to promote cell-substrate interactions and maintenance of cell functions.

A Novel 3D Scaffold for Cell Growth to Asses Electroporation Efficacy

Tumor electroporation (EP) refers to the permeabilization of the cell membrane by means of short electric pulses thus allowing the potentiation of chemotherapeutic drugs. Standard plate adhesion 2D cell cultures can simulate the in vivo environment only partially due to lack of cell–cell interaction and extracellular matrix (ECM). In this study, we assessed a novel 3D scaffold for cell cultures based on hyaluronic acid and ionic-complementary self-assembling peptides (SAPs), by studying the growth patterns of two different breast carcinoma cell lines (HCC1569 and MDA-MB231). This 3D scaffold modulates cell shape and induces extracellular matrix deposit around cells. In the MDA-MB 231 cell line, it allows three-dimensional growth of structures known as spheroids, while in HCC1569 it achieves a cell organization similar to that observed in vivo. Interestingly, we were able to visualize the electroporation effect on the cells seeded in the new scaffold by means of standard propidium iodide assay and fluorescence microscopy. Thanks to the presence of cell–cell and cell–ECM interactions, the new 3D scaffold may represent a more reliable support for EP studies than 2D cancer cell cultures and may be used to test new EP-delivered drugs and novel EP protocols.

The Potential Use of Electrochemotherapy in the Treatment of Uveal Melanoma: In Vitro Results in 3D Tumor Cultures and In Vivo Results in a Chick Embryo Model

Uveal melanoma (UM) is the most common primary intraocular tumor that arises from neoplastic melanocytes in the choroid, iris, and ciliary body. Electrochemotherapy (ECT) has been successfully established for the treatment of skin and soft tissue metastatic lesions, deep-seated tumors of the liver, bone metastases, and unresectable pancreas lesions. The aim of this study was to evaluate the effect of ECT in vitro in 3D spheroid culture systems in primary and metastatic UM cell lines. We also investigated the chick embryo chorioallantoic membrane (CAM) as an in vivo model system for the growth and treatment of UM tumors using ECT. The cytotoxic effect of ECT in 3D spheroids was analyzed seven days following treatment by assessment of the size and MTT [(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) tetrazolium reduction] assay. The cytotoxicity of ECT after intratumoral or intraarterial administration was evaluated histologically. In vitro and in vivo ECT caused a significant reduction in tumor size and viability compared to electroporation or chemotherapy in both sections of our study. The current results underline the effectiveness of ECT in the treatment of UM and prepare the way for further investigation of its potential application in UM.