1
|
Żylińska B, Stodolak-Zych E, Sobczyńska-Rak A, Szponder T, Silmanowicz P, Łańcut M, Jarosz Ł, Różański P, Polkowska I. Osteochondral Repair Using Porous Three-dimensional Nanocomposite Scaffolds in a Rabbit Model. ACTA ACUST UNITED AC 2018; 31:895-903. [PMID: 28882956 DOI: 10.21873/invivo.11144] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2017] [Revised: 06/26/2017] [Accepted: 07/03/2017] [Indexed: 11/10/2022]
Abstract
AIM To evaluate the utility of a novel nanocomposite biomaterial consisting of poly-L/D-lactide, and hydroxyapatite bioceramics, enriched with sodium alginate in articular cartilage defect treatment. MATERIALS AND METHODS The biomaterial was prepared using the method of solvent casting and particle leaching. The study was conducted on 20 New Zealand White rabbits. Experimental osteochondral defects were created in the femoral trochlear grooves and filled with biomaterials. In control groups, the defects were left to spontaneously heal. The quality of newly-formed tissue was evaluated on the basis of macroscopic and histological assessment. Additionally the level of osteogenic and cartilage degradation markers were measured. RESULTS The majority of the defects from the treatment group were covered with tissue similar in structure and colour to healthy cartilage, whereas in the control group, tissue was uneven, and not integrated into the surrounding cartilage. CONCLUSION The results obtained validate the choice of biomaterial used in this study as well as the method of its application.
Collapse
Affiliation(s)
- Beata Żylińska
- Department and Clinic of Animal Surgery, Faculty of Veterinary Medicine, University of Life Sciences in Lublin, Lublin, Poland
| | - Ewa Stodolak-Zych
- Department of Biomaterials, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Cracow, Poland
| | - Aleksandra Sobczyńska-Rak
- Department and Clinic of Animal Surgery, Faculty of Veterinary Medicine, University of Life Sciences in Lublin, Lublin, Poland
| | - Tomasz Szponder
- Department and Clinic of Animal Surgery, Faculty of Veterinary Medicine, University of Life Sciences in Lublin, Lublin, Poland
| | - Piotr Silmanowicz
- Department and Clinic of Animal Surgery, Faculty of Veterinary Medicine, University of Life Sciences in Lublin, Lublin, Poland
| | - Mirosław Łańcut
- Department of Histology and Embryology, Laboratory for Experimental Cytology, Medical University of Lublin, Lublin, Poland
| | - Łukasz Jarosz
- Department of Epizootiology and Clinic of Infectious Diseases, University of Life Sciences in Lublin, Lublin, Poland
| | - Paweł Różański
- Department of Biology and Environmental Hygiene, University of Life Sciences in Lublin, Lublin, Poland
| | - Izabela Polkowska
- Department and Clinic of Animal Surgery, Faculty of Veterinary Medicine, University of Life Sciences in Lublin, Lublin, Poland
| |
Collapse
|
2
|
Domingues RCC, Pereira CC, Borges CP. Effect of stereoisomerism of poly(lactic acid) during neural guide conduit membrane synthesis. J Appl Polym Sci 2018. [DOI: 10.1002/app.46190] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Rui Carlos Castro Domingues
- COPPE/Chemical Engineering Program; Federal University of Rio de Janeiro, P.O. Box 68502; Rio de Janeiro 21945-970 Brazil
| | - Cristina Cardoso Pereira
- COPPE/Chemical Engineering Program; Federal University of Rio de Janeiro, P.O. Box 68502; Rio de Janeiro 21945-970 Brazil
| | - Cristiano Piacsek Borges
- COPPE/Chemical Engineering Program; Federal University of Rio de Janeiro, P.O. Box 68502; Rio de Janeiro 21945-970 Brazil
| |
Collapse
|
3
|
Lavrador C, Mascarenhas R, Coelho P, Brites C, Pereira A, Gogolewski S. Elastomeric enriched biodegradable polyurethane sponges for critical bone defects: a successful case study reducing donor site morbidity. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2016; 27:61. [PMID: 26800692 DOI: 10.1007/s10856-016-5667-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2015] [Accepted: 01/08/2016] [Indexed: 06/05/2023]
Abstract
Bone substitutes have been a critical issue as the natural source can seldom provide enough bone to support full healing. No bone substitute complies with all necessary functions and characteristics that an autograft does. Polyurethane sponges have been used as a surgical alternative to cancellous bone grafts for critical bone defect donor sites. Critical bone defects were created on the tibial tuberosity and iliac crest using an ovine model. In group I (control-untreated), no bone regeneration was observed in any animal. In group II (defects left empty but covered with a microporous polymeric membrane), the new bone bridged the top ends in all animals. In groups III and IV, bone defects were implanted with polyurethane scaffolds modified with biologically active compounds, and bone regeneration was more efficient than in group II. In groups III and IV there were higher values of bone regeneration specific parameters used for evaluation (P < 0.05) although the comparison between these groups was not possible. The results obtained in this study suggest that biodegradable polyurethane substitutes modified with biologically active substances may offer an alternative to bone graft, reducing donor site morbidity associated with autogenous cancellous bone harvesting.
Collapse
Affiliation(s)
- Catarina Lavrador
- Institute of Mediterranean Agricultural and Environmental Science (ICAAM); School of Science and Technology (ECT), University of Évora, Évora, Portugal.
| | - Ramiro Mascarenhas
- Institute of National Agricultural and Veterinary Research (INIAV), Av. da República, Quinta do Marquês, 2780-157, Oeiras, Portugal
| | - Paulo Coelho
- Faculty of Dental Medicine, University of Lisbon, Av. Prof. Gama Pinto, 1649-003, Lisbon, Portugal
| | - Cláudia Brites
- Laboratório de Tecidos Duros - Area of Dental Medicine, Faculty of Medicine, University of Coimbra, Av. Bissaya Barreto, Blocos de Celas, 3000-075, Coimbra, Portugal
| | - Alfredo Pereira
- Institute of Mediterranean Agricultural and Environmental Science (ICAAM); School of Science and Technology (ECT), University of Évora, Évora, Portugal
| | | |
Collapse
|
4
|
Durgalakshmi D, Balakumar S. Analysis of solvent induced porous PMMA–Bioglass monoliths by the phase separation method – mechanical and in vitro biocompatible studies. Phys Chem Chem Phys 2015; 17:1247-56. [DOI: 10.1039/c4cp03515a] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Bone microstructure and its mechanical properties are mimicked by PMMA–Bioglass monoliths fabricated by the phase separation method.
Collapse
Affiliation(s)
- D. Durgalakshmi
- National Centre for Nanoscience and Nanotechnology
- University of Madras
- Chennai 600025
- India
| | - S. Balakumar
- National Centre for Nanoscience and Nanotechnology
- University of Madras
- Chennai 600025
- India
| |
Collapse
|
5
|
Sciancalepore AG, Sallustio F, Girardo S, Gioia Passione L, Camposeo A, Mele E, Di Lorenzo M, Costantino V, Schena FP, Pisignano D. A bioartificial renal tubule device embedding human renal stem/progenitor cells. PLoS One 2014; 9:e87496. [PMID: 24498117 PMCID: PMC3907467 DOI: 10.1371/journal.pone.0087496] [Citation(s) in RCA: 52] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/11/2013] [Accepted: 12/24/2013] [Indexed: 12/20/2022] Open
Abstract
We present a bio-inspired renal microdevice that resembles the in vivo structure of a kidney proximal tubule. For the first time, a population of tubular adult renal stem/progenitor cells (ARPCs) was embedded into a microsystem to create a bioengineered renal tubule. These cells have both multipotent differentiation abilities and an extraordinary capacity for injured renal cell regeneration. Therefore, ARPCs may be considered a promising tool for promoting regenerative processes in the kidney to treat acute and chronic renal injury. Here ARPCs were grown to confluence and exposed to a laminar fluid shear stress into the chip, in order to induce a functional cell polarization. Exposing ARPCs to fluid shear stress in the chip led the aquaporin-2 transporter to localize at their apical region and the Na+K+ATPase pump at their basolateral portion, in contrast to statically cultured ARPCs. A recovery of urea and creatinine of (20±5)% and (13±5)%, respectively, was obtained by the device. The microengineered biochip here-proposed might be an innovative “lab-on-a-chip” platform to investigate in vitro ARPCs behaviour or to test drugs for therapeutic and toxicological responses.
Collapse
Affiliation(s)
- Anna Giovanna Sciancalepore
- Center for Biomolecular Nanotechnologies, Istituto Italiano di Tecnologia, Arnesano, Italy
- * E-mail: (AGS); (DP)
| | - Fabio Sallustio
- Nephrology, Dialysis and Transplantation Unit, Department of Emergency and Organ Transplantation, University of Bari, Bari, Italy
- Centro Addestramento Ricerca Scientifica in Oncologia (C.A.R.S.O.) Consortium, Valenzano, Italy
- Department of Science, Biological and Environmental Sciences and Technologies, University of Salento, Lecce, Italy
| | - Salvatore Girardo
- National Nanotechnology Laboratory of Istituto Nanoscienze-CNR, Lecce, Italy
| | - Laura Gioia Passione
- Center for Biomolecular Nanotechnologies, Istituto Italiano di Tecnologia, Arnesano, Italy
- National Nanotechnology Laboratory of Istituto Nanoscienze-CNR, Lecce, Italy
- Dipartimento di Matematica e Fisica “Ennio De Giorgi”, Universitá del Salento, Lecce, Italy
| | - Andrea Camposeo
- Center for Biomolecular Nanotechnologies, Istituto Italiano di Tecnologia, Arnesano, Italy
- National Nanotechnology Laboratory of Istituto Nanoscienze-CNR, Lecce, Italy
| | - Elisa Mele
- Center for Biomolecular Nanotechnologies, Istituto Italiano di Tecnologia, Arnesano, Italy
| | - Mirella Di Lorenzo
- National Nanotechnology Laboratory of Istituto Nanoscienze-CNR, Lecce, Italy
| | - Vincenzo Costantino
- Nephrology, Dialysis and Transplantation Unit, Department of Emergency and Organ Transplantation, University of Bari, Bari, Italy
| | - Francesco Paolo Schena
- Nephrology, Dialysis and Transplantation Unit, Department of Emergency and Organ Transplantation, University of Bari, Bari, Italy
- Centro Addestramento Ricerca Scientifica in Oncologia (C.A.R.S.O.) Consortium, Valenzano, Italy
| | - Dario Pisignano
- Center for Biomolecular Nanotechnologies, Istituto Italiano di Tecnologia, Arnesano, Italy
- National Nanotechnology Laboratory of Istituto Nanoscienze-CNR, Lecce, Italy
- Dipartimento di Matematica e Fisica “Ennio De Giorgi”, Universitá del Salento, Lecce, Italy
- * E-mail: (AGS); (DP)
| |
Collapse
|
6
|
Mafina MK, Hing KA, Sullivan AC. Development of novel fluorescent probes for the analysis of protein interactions under physiological conditions with medical devices. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:1420-1426. [PMID: 23259749 DOI: 10.1021/la304244s] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
In this article, a method to analyze protein adsorption on porous, clinically relevant samples under physiologically relevant conditions is described. The use of fluorescent probes was identified as a methodology that would facilitate analysis under a range of conditions including fully competitive conditions where a protein of interest may be labeled in isolation and then allowed to compete with unlabeled proteins on samples that require no specialized surface pretreatment. As a first step, this article describes the covalent labeling of isolated bovine serum albumin (BSA) with fluorescent fluoresceinthioureidoaminocaproic acid, FTCA, giving FTCA-BSA. The fluorescence intensity of FTCA-BSA was then used to monitor the adsorption and desorption of the protein under noncompetitive conditions with two forms of hydroxyapatite discs (silicate-substituted, SA and stoichiometric, HA) in phosphate-buffered saline (PBS) and minimum essential Eagles' medium (MEM). Noncompetitive conditions were used to facilitate the validation of the technique in which data obtained from these experiments were corroborated against data obtained using an established total protein assay method (Quant-IT kit, Invitrogen). These experiments demonstrated that the FTCA-BSA probe had several advantages including a greater sensitivity at lower concentrations and a considerably longer lifetime. The results also demonstrated that the interaction of BSA with SA and HA was also highly temperature- and media-dependent. Under the most physiologically relevant conditions of MEM at 37 °C, BSA was more readily adsorbed to SA with significant differences between biomaterials, but no differences were observed during the desorption process. The use of this method to analyze adsorption under competitive conditions will be the subject of further investigations.
Collapse
Affiliation(s)
- Marc-Krystelle Mafina
- School of Engineering and Materials Science, Queen Mary University of London, London E1 4NS, UK
| | | | | |
Collapse
|
7
|
Liu H, Raghavan D, Melaku S, Stubbs J. Biological response of osteoblast-like UMR-106 cells to the modified PHBV matrix--effects of porosity and collagen dip coating. J Biomed Mater Res A 2010; 92:922-30. [PMID: 19291684 DOI: 10.1002/jbm.a.32427] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
In this study, we related porosity and collagen coating of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffold to the degree of cell proliferation on the engineered PHBV scaffold. Based on the [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2h-tetrazolium, inner salt] (MTS) assay, we established that UMR-106 cell proliferation is maximum in collagen-coated porous PHBV film followed by porous PHBV film and least in nonporous PHBV film. RT-PCR analysis of the proliferated cells on tissue culture polystyrene (TCPS) and porous and nonporous PHBV scaffolds revealed that the proliferated cells retained their osteoblastic phenotype characteristics. Atomic absorption analysis was performed to measure the extent of calcium conversion by the cells grown on PHBV and TCPS. The calcium content of the culture media was used to indirectly measure the mineralization ability of the cells. The extent of calcium conversion by the cells was found to depend on the incubation time. Based on the results of the study, modified PHBV matrix seems to be a suitable matrix candidate for bone tissue engineering application.
Collapse
Affiliation(s)
- Hui Liu
- Department of Chemistry, Howard University, Washington DC 20059, USA
| | | | | | | |
Collapse
|
8
|
D'Britto V, Tiwari S, Purohit V, Wadgaonkar PP, Bhoraskar SV, Bhonde RR, Prasad BLV. Composites of plasma treated poly(etherimide) films with gold nanoparticles and lysine through layer by layer assembly: a “friendly-rough” surface for cell adhesion and proliferation for tissue engineering applications. ACTA ACUST UNITED AC 2009. [DOI: 10.1039/b817231e] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
9
|
Rasal RM, Bohannon BG, Hirt DE. Effect of the photoreaction solvent on surface and bulk properties of poly(lactic acid) and poly(hydroxyalkanoate) films. J Biomed Mater Res B Appl Biomater 2008; 85:564-72. [DOI: 10.1002/jbm.b.30980] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
10
|
Santos Jr AR, Wada MLF. Polímeros biorreabsorvíveis como substrato para cultura de células e engenharia tecidual. POLIMEROS 2007. [DOI: 10.1590/s0104-14282007000400010] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Biomateriais poliméricos são desenvolvidos para uso como substitutos de tecidos danificados e/ou estimular sua regeneração. Uma classe de biomateriais poliméricos são os biorreabsorvíveis, compostos que se decompõem tanto in vitro quanto in vivo. São empregados em tecidos que necessitam de um suporte temporário para sua recomposição tecidual. Dentre os vários polímeros biorreabsorvíveis, destacam-se os alfa-hidróxi ácidos, entre eles, diferentes composições do poli(ácido lático) (PLA), como o poli(L-ácido lático) (PLLA), poli(D-ácido lático) (PDLA), poli(DL-ácido lático) (PDLLA), além do poli(ácido glicólico) (PGA) e da policaprolactona (PCL). Estes polímeros são considerados biorreabsorvíveis por apresentarem boa biocompatibilidade e os produtos de sua decomposição serem eliminados do corpo por vias metabólicas. Diversas linhas de pesquisa mostram que os diferentes substratos à base de PLA estudados não apresentam toxicidade, uma vez que as células são capazes de crescer e proliferar sobre eles. Além disso, diversos tipos de células cultivadas sobre diferentes formas de PLA são capazes de se diferenciarem sobre os diferentes polímeros e passar a produzir componentes de matriz extracelular. Neste trabalho, é revisada a utilização de substratos à base de alfa-hidróxi ácidos, com destaque para diferentes formas de PLA, utilizados como substratos para cultura de células, bem como suas aplicações.
Collapse
|
11
|
Ellä V, Gomes ME, Reis RL, Törmälä P, Kellomäki M. Studies of P(L/D)LA 96/4 non-woven scaffolds and fibres; properties, wettability and cell spreading before and after intrusive treatment methods. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2007; 18:1253-61. [PMID: 17277973 DOI: 10.1007/s10856-007-0144-z] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2005] [Accepted: 03/29/2006] [Indexed: 05/13/2023]
Abstract
Poly(L/D)lactide 96/4 fibres with diameters of 50 and 80 microm were produced. The smaller diameter fibres were carded and needle punched to form a non-woven mat. Fibres and non-woven mats were hydrolysed for a period of 20 weeks. Fibres and pressed non-woven discs were treated with low-temperature oxygen plasma and alkaline KOH hydrolysis and ethanol washing was used as a reference treatment. The non-wovens lost 50% of their tear strength after 8 weeks in vitro while the fibres still retained 65% tensile strength after 20 weeks. Hydrolysation time in KOH, treatment time and power settings of the oxygen plasma were all directly proportional to the mechanical properties of the fibres. Increasing time (and power) resulted in lower tensile properties. Rapid wetting of the scaffolds was achieved by oxygen plasma, KOH hydrolysation and ethanol washing. Cell culturing using fibroblast cell line was carried out for the treated and non-treated non-woven scaffolds. In terms of adhesion and the spreading of the cells into the scaffold, best results after 3-day culturing were obtained for the oxygen plasma treated scaffolds.
Collapse
Affiliation(s)
- Ville Ellä
- Institute of Biomaterials, Tampere University of Technology, P. O. Box 589, Tampere 33101, Finland.
| | | | | | | | | |
Collapse
|
12
|
Gogolewski S, Gorna K. Biodegradable polyurethane cancellous bone graft substitutes in the treatment of iliac crest defects. J Biomed Mater Res A 2007; 80:94-101. [PMID: 16960827 DOI: 10.1002/jbm.a.30834] [Citation(s) in RCA: 82] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Porous scaffolds were produced from newly designed biodegradable, segmented aliphatic polyurethanes of various chemical compositions and hydrophilic-to-hydrophobic segment ratios. The scaffolds were implanted into monocortical defects in the iliac crest of healthy sheep for 6 months. The resected cortex was not repositioned. The ilium defects, which were not implanted with polyurethane scaffolds, were used as controls. In none of the control defects was there bone regeneration at the time of euthanasia. The defects implanted with porous scaffolds from polyurethanes were healed to varying extents with cancellous bone. The structure of the regenerated cancellous bone was radiographically denser than the structure of native bone. New bone that was formed in the scaffolds with a higher amount of hydrophilic component contained more calcium phosphate deposit than the bone formed in the scaffolds with a lower amount of the hydrophilic component. There was no new cortex formed over the defect, but a thin layer of soft tissue covered the newly formed cancellous bone.
Collapse
Affiliation(s)
- Sylwester Gogolewski
- Polymer Research, AO Research Institute, Clavadelerstrasse, CH-7270 Davos, Switzerland.
| | | |
Collapse
|
13
|
Ciapetti G, Ambrosio L, Marletta G, Baldini N, Giunti A. Human bone marrow stromal cells: In vitro expansion and differentiation for bone engineering. Biomaterials 2006; 27:6150-60. [PMID: 16965811 DOI: 10.1016/j.biomaterials.2006.08.025] [Citation(s) in RCA: 76] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2006] [Accepted: 08/01/2006] [Indexed: 01/02/2023]
Abstract
Stromal cells from marrow hold a great promise for bone regeneration. Even if they are already being exploited in many clinical settings, the biological basis for the source and maintenance of their proliferation/differentiation potential after in vitro isolation and expansion needs further investigation. Most studies on osteogenic differentiation of marrow stromal cells (MSC) have been performed using bone marrow from the iliac crest. In this study, MSC were derived from spare femoral bone marrow obtained during hip replacement surgery from 20 adult donors. After in vitro isolation the cells were grown in osteogenic medium, and their proliferation and differentiation analysed during in vitro expansion. We found that MSC isolated from the femur of adult patients consistently maintain an osteogenic potential. Using biochemical signals, these cells turn to fully differentiated osteoblasts with a predictable set of molecular and phenotypic events of in vitro bone deposition. When seeded on polycaprolactone-based scaffold or surfaces, the proliferation and mineralization of femur-derived MSC were modulated by the surface chemistry/topography. Despite remarkable differences between individual colony-forming ability, alkaline phosphatase production, and mineralization ability, these cells are a potential source for bone engineering, either by direct autologous reimplantation or by ex vivo expansion and reimplantation combined to a proper scaffold.
Collapse
Affiliation(s)
- G Ciapetti
- Laboratory for Pathophysiology of Orthopaedic Implants, Istituti Ortopedici Rizzoli, University of Bologna, via di Barbiano 1/10, 40136 Bologna, Italy.
| | | | | | | | | |
Collapse
|
14
|
Jäger M, Feser T, Denck H, Krauspe R. Proliferation and osteogenic differentiation of mesenchymal stem cells cultured onto three different polymers in vitro. Ann Biomed Eng 2006; 33:1319-32. [PMID: 16240081 DOI: 10.1007/s10439-005-5889-2] [Citation(s) in RCA: 54] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2005] [Accepted: 05/12/2005] [Indexed: 12/13/2022]
Abstract
In this study, the osteoinductive and cell-binding properties of three different resorbable polymers were evaluated by human mesenchymal stem cells (MSCs). MSCs were isolated, expanded, and cultivated onto resorbable D,D,L,L-polylactide (PLLA), collagen I/III, and polygalactin-910/polydioxanone (PGPD) scaffolds in vitro. To evaluate the influence of dexamethasone, ascorbic acid, and beta-glycerolphosphate (DAG) on osteoblast differentiation, MSCs were incubated in a DAG-enriched medium. After a 28-day period in vitro, the cellular loaded polymers were digested enzymatically by papain and HCl. The Ca(2+) content of the biomembranes was evaluated by an o-kresolphthalein-complexon reaction via photometer. A PicoGreen assay was performed for dsDNA quantification. Significant differences between the number of adherent MSCs were documented (collagen > PLLA > PGPD). Compared to the initial number of adherent cells, all biomaterials induced a significant decrease in cellular adherence after 28 days in vitro. The presence of DAG-enriched culture medium stimulated the cellular proliferation for PLLA and slightly for PGPD, whereas cell proliferation was inhibited when MSCs were cultivated onto collagen I/III. In comparison with the control groups, all biomaterials (PLLA, PGPD, and collagen I/III) showed a significant increase in local Ca(2+) accumulation under DAG stimulation after 28 days in vitro. Furthermore, collagen I/III and PLLA scaffolds showed osteoinductive properties without DAG stimulation. These results were verified by immunocytochemical stainings against osteoblast-typical markers (osteopontin and alkaline phosphatase) and completed by calcified matrix detection (von Kossa staining). MSCs were identified by CD105 and CD13 antigen expression. Corresponding to an absence of CD34, CD45, and collagen II expression, we found no chondrogenic or hematopoietic cell differentiation. The results indicate significant differences for the proliferation, differentiation, adherence, and Ca(2+) accumulation between the tested polymers in a MSC culture.
Collapse
Affiliation(s)
- M Jäger
- Orthopaedic Research Lab, Department of Orthopaedics, Heinrich-Heine University Duesseldorf, Moorenstrasse 5, D-40225 Duesseldorf, Germany (FRG).
| | | | | | | |
Collapse
|
15
|
Gorna K, Gogolewski S. Biodegradable porous polyurethane scaffolds for tissue repair and regeneration. J Biomed Mater Res A 2006; 79:128-38. [PMID: 16779769 DOI: 10.1002/jbm.a.30708] [Citation(s) in RCA: 106] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Critical-size bone defects usually require the insertion of autogenous bone graft to heal. Harvesting of bone is traumatic and results in high morbidity at the donor site. A potential alternative to bone graft may be a bone substitute with adequate biocompatibility and biological properties produced from ceramics or bioresorbable/biodegradable polymers. In the present study, new elastomeric biodegradable polyurethanes with an enhanced affinity toward cells and tissues were synthesized using aliphatic diisocyanate, poly(epsilon-caprolactone) diol, and biologically active 1,4:3,6-dianhydro-D-sorbitol (isosorbide diol) as chain extender. The polymers were processed into 3D porous scaffolds by applying a combined salt leaching-phase inverse process. The critical parameters controlling pore size and geometry were the solvents and nonsolvents used for scaffold preparation and the sizes of the solid porogen crystals. Scaffolds prepared from the polymer solution in solvents such as dimethylsulfoxide or methyl-2-pyrrolidone did not have a homogenous pore structure. Many pores were interconnected, but numerous pores were closed. Irrespective of the high pore-to-volume ratio (75%), the scaffolds showed poor water permeability. The best solvent for the preparation of scaffolds from the polyurethane used in the study was dimethylformamide (DMF). The type of nonsolvent admixed to the polymer solution in DMF strongly affected the scaffolds' pore structure. The elastomeric polyurethane scaffold prepared from the optimal solvent-nonsolvent mixture had regular interconnected pores, high water permeability, and a pore-to-volume ratio of 90%. The osteoconductive properties of the 3D porous polyurethane scaffolds can be additionally promoted by loading them with calcium phosphate salts such as hydroxyapatite or tricalcium phosphate, thus making them promising candidates for bone graft substitutes.
Collapse
Affiliation(s)
- Katarzyna Gorna
- Polymer Research, AO Research Institute, Clavadelerstrasse 8, CH-7270 Davos, Switzerland
| | | |
Collapse
|
16
|
Gugala Z, Gogolewski S. Thein vitro growth and activity of sheep osteoblasts on three-dimensional scaffolds from poly(L/DL-lactide) 80/20%. J Biomed Mater Res A 2005; 75:702-9. [PMID: 16110490 DOI: 10.1002/jbm.a.30479] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Critical-size bone defects usually require the use of autogenous bone grafts to heal. Harvesting of bone is traumatic, and results in high morbidity of donor site. A potential alternative to bone graft may be a bone substitute with adequate biocompatibility and biological properties produced from ceramics and/or bioresorbable or biodegradable polymers. In the present study, sheep osteoblasts isolated from cancellous bone chips were seeded and cultured for 1, 2, and 3 weeks on porous poly(L/DL-lactide) 80/20% scaffolds. The cell morphology was assessed from rhodamine staining and scanning electron microscopy, cell growth, and activity from the measurements of DNA, alkaline phosphatase activity, and total protein amount in the cell lysate, and mineral deposits from EDAX and van Kossa staining. The cells attached firmly to the scaffold walls, grew deeply into the pores, and exhibited morphology typical of osteoblasts. Mineralized noduli with a Ca/P ratio of 1.4 to 1.8 found in the scaffold indicated that the cells had maintained their osteoblastic phenotype. The amount of DNA, alkaline phosphatase activity, and the total amount of proteins increased with time of culturing, although at 3 weeks the cells did not yet reach the contact inhibition. These results demonstrate that three-dimensional porous poly(L/DL-lactide) 80/20% scaffolds provide a suitable substrate for the attachment and growth of primary osteoblasts, and might potentially be used as bone defect fillers and in the design of tissue-engineered bone substitutes.
Collapse
Affiliation(s)
- Zbigniew Gugala
- Polymer Research, AO/ASIF Research Institute, CH-7270 Davos, Switzerland
| | | |
Collapse
|
17
|
Guerra NP, Araujo AB, Barrera AM, Agrasar AT, Macías CL, Carballo J, Pastrana L. Antimicrobial activity of nisin adsorbed to surfaces commonly used in the food industry. J Food Prot 2005; 68:1012-9. [PMID: 15895735 DOI: 10.4315/0362-028x-68.5.1012] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
The adsorption isotherms of nisin to three food contact surfaces, stainless steel, polyethyleneterephthalate (PET), and rubber at 8, 25, 40, and 60 degrees C, were calculated. For all surfaces, the increase in temperature led to a decrease in the affinity between nisin and the surface. The rubber adsorbed a higher amount of nisin (0.697 microg/cm2) in comparison with PET (0.665 microg/cm2) and stainless steel (0.396 microg/cm2). Adsorption of nisin to the stainless steel surface described L-2 type curves for all temperatures assayed. However, for PET and rubber surfaces, the isotherms were L-2 type (at 40 and 60 degrees C) and L-4 type curves (at 8 and 25 degrees C). Nisin retained its antibacterial activity once adsorbed to the food contact surfaces and was able to inhibit the growth of Enterococcus hirae CECT 279 on Rothe agar medium. The attachment of three Listeria monocytogenes strains to the three surfaces was found to be dependent on the surface, the strain, and the initial bacterial suspension in contact with the surface. The adsorption of Nisaplin on surfaces reduced the attachment of all L. monocytogenes strains tested. The effect of PET-based bioactive packaging in food was very encouraging. When applied to a food system, nisin-adsorbed PET bottles reduced significantly (P < 0.05) the levels of the total aerobic plate counts in skim milk by approximately 1.4 log units after 24 days of refrigerated storage (4 degrees C), thus extending its shelf life.
Collapse
Affiliation(s)
- Nelson P Guerra
- Departamento de Bioquímica, Xenética, e Inmunoloxía, Facultade de Ciencias de Ourense, Universidade de Vigo, As Lagoas, 32004, Ourense, Spain
| | | | | | | | | | | | | |
Collapse
|
18
|
Gugala Z, Gogolewski S. Attachment, growth, and activity of rat osteoblasts on polylactide membranes treated with various low-temperature radiofrequency plasmas. J Biomed Mater Res A 2005; 76:288-99. [PMID: 16270339 DOI: 10.1002/jbm.a.30462] [Citation(s) in RCA: 36] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Nonporous and porous membranes from poly(L/DL-lactide) 80/20% were treated with low-temperature oxygen, ammonia, or sulphur dioxide-hydrogen plasmas and the late effects of plasma treatment on physicochemical characteristics of the membranes' surface were analyzed. The plasma treatment resulted in the permanent attachment of sulphur and nitrogen functionalities to the membrane's surface, and increased the surface concentration of oxygen, thereby increasing the surface wettability. To assess whether the plasma treatment affects the cellular response, primary rat osteoblasts were cultured on nontreated and plasma-treated nonporous and microporous membranes, and attachment, growth, and activity of cells were investigated. It was found that attachment and growth of osteoblasts on all the plasma-treated membranes were greater compared with nontreated controls. The treatment with ammonia plasma was most efficacious. The beneficial effects of plasma treatment on cells were most pronounced for microporous polylactide membranes irrespective of the plasma used. The results of the study suggest that the treatment of porous polylactide structures with plasma can be an effective means of enhancing their suitability for tissue engineering. Plasma exposure may also have an advantageous effect on bone healing when polylactide membranes are used to treat bone defects.
Collapse
Affiliation(s)
- Zbigniew Gugala
- Polymer Research, AO Research Institute, CH-7270 Davos, Switzerland
| | | |
Collapse
|
19
|
Sung HJ, Su J, Berglund JD, Russ BV, Meredith JC, Galis ZS. The use of temperature-composition combinatorial libraries to study the effects of biodegradable polymer blend surfaces on vascular cells. Biomaterials 2004; 26:4557-67. [PMID: 15722125 DOI: 10.1016/j.biomaterials.2004.11.034] [Citation(s) in RCA: 29] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2004] [Accepted: 11/16/2004] [Indexed: 11/28/2022]
Abstract
Controlling cellular and physiological responses such as adhesion, proliferation and migration is a highly desirable feature of engineered scaffolds. One important application would be the design of tissue engineered vascular grafts that regulate cell adhesion and growth. We utilized temperature-composition combinatorial polymer libraries to investigate the effects of surfaces of blended poly(D,L-lactic-co-glycolic acid) (PLGA) and poly(epsilon-caprolactone) (PCL) on murine vascular smooth muscle cells (SMC). In this manner, SMCs were exposed to approximately 1000 distinguishable surfaces in a single experiment, allowing the discovery of optimal polymer compositions and processing conditions. SMC adhesion, aggregation, proliferation, and protein production were highest in regions with mid- to high-PCL concentrations and high annealing temperatures. These regions exhibited increased surface roughness, increased microscale PLGA-rich matrix stiffness, and significant change of bulk PCL-rich crystallinity relative to other library regions. This study revealed a previously unknown processing temperature and blending composition for two well-known polymers that optimized SMC interactions.
Collapse
Affiliation(s)
- Hak-Joon Sung
- The Wallace H. Coulter Department of Biomedical Engineering at Georgia Technology and Emory University, 313 Ferst Drive, Suite 1209, Atlanta, GA 30332-0535, USA.
| | | | | | | | | | | |
Collapse
|