In situ polymerizable polyethyleneglycol containing polyesterpolyol acrylates for tissue sealant applications

Thermal, Morphological and Mechanical Properties of Multifunctional Composites Based on Biodegradable Polymers/Bentonite Clay: A Review

The extensive use of non-biodegradable plastic products has resulted in significant environmental problems caused by their accumulation in landfills and their proliferation into water bodies. Biodegradable polymers offer a potential solution to mitigate these issues through the utilization of renewable resources which are abundantly available and biodegradable, making them environmentally friendly. However, biodegradable polymers face challenges such as relatively low mechanical strength and thermal resistance, relatively inferior gas barrier properties, low processability, and economic viability. To overcome these limitations, researchers are investigating the incorporation of nanofillers, specifically bentonite clay, into biodegradable polymeric matrices. Bentonite clay is an aluminum phyllosilicate with interesting properties such as a high cation exchange capacity, a large surface area, and environmental compatibility. However, achieving complete dispersion of nanoclays in polymeric matrices remains a challenge due to these materials' hydrophilic and hydrophobic nature. Several methods are employed to prepare polymer-clay nanocomposites, including solution casting, melt extrusion, spraying, inkjet printing, and electrospinning. Biodegradable polymeric nanocomposites are versatile and promising in various industrial applications such as electromagnetic shielding, energy storage, electronics, and flexible electronics. Additionally, combining bentonite clay with other fillers such as graphene can significantly reduce production costs compared to the exclusive use of carbon nanotubes or metallic fillers in the matrix. This work reviews the development of bentonite clay-based composites with biodegradable polymers for multifunctional applications. The composition, structure, preparation methods, and characterization techniques of these nanocomposites are discussed, along with the challenges and future directions in this field.

Spin-coated freestanding films for biomedical applications

Spin-coating is a widely employed technique for the fabrication of thin-film coatings over large areas with smooth and homogeneous surfaces. In recent years, research has extended the scope of spin-coating by developing methods involving the interface of the substrate and the deposited solution to obtain self-supported films, also called freestanding films. Thereby, such structures have been developed for a wide range of areas. Biomedical applications of spin-coated freestanding films include wound dressings, drug delivery, and biosensing. This review will discuss the fundamental physical and chemical processes governing the conventional spin-coating as well as the techniques to obtain freestanding films. Furthermore, developments within this field with a primary focus on tissue engineering applications will be reviewed.

Recent Advances on Synthetic and Polysaccharide Adhesives for Biological Hemostatic Applications

Rapid hemostasis and formation of stable blood clots are very important to prevent massive blood loss from the excessive bleeding for living body, but their own clotting process cannot be completed in time for effective hemostasis without the help of hemostatic materials. In general, traditionally suturing and stapling techniques for wound closure are prone to cause the additional damages to the tissues, activated inflammatory responses, short usage periods and inevitable second operations in clinical applications. Especially for the large wounds that require the urgent closure of fluids or gases, these conventional closure methods are far from enough. To address these problems, various tissue adhesives, sealants and hemostatic materials are placed great expectation. In this review, we focused on the development of two main categories of tissue adhesive materials: synthetic polymeric adhesives and naturally derived polysaccharide adhesives. Research of the high performance of hemostatic adhesives with strong adhesion, better biocompatibility, easy usability and cheap price is highly demanded for both scientists and clinicians, and this review is also intended to provide a comprehensive summarization and inspiration for pursuit of more advanced hemostatic adhesives for biological fields.

Recent Advances in Hemostasis at the Nanoscale

Rapid and effective hemostatic materials have received wide attention not only in the battlefield but also in hospitals and clinics. Traditional hemostasis relies on materials with little designability which has many limitations. Nanohemostasis has been proposed since the use of peptides in hemostasis. Nanomaterials exhibit excellent adhesion, versatility, and designability compared to traditional materials, laying a good foundation for future hemostatic materials. This review first summarizes current hemostatic methods and materials, and then introduces several cutting-edge designs and applications of nanohemostatic materials such as polypeptide assembly, electrospinning of cyanoacrylate, and nanochitosan. Particularly, their advantages and working mechanisms are introduced. Finally, the challenges and prospects of nanohemostasis are discussed.

Novel non-cytotoxic, bioactive and biodegradable hybrid materials based on polyurethanes/TiO2 for biomedical applications

Titanium compounds have demonstrated great interfacial properties with biological tissues whereas a wide variety of polyurethanes have also been successfully probed in medical applications. However, studies about hybrids based on polyurethanes/TiO₂ for medical applications are scarce. The aim of this work is to design novel biodegradable hybrid materials based on polyurethanes/TiO₂ (80% organic-20% inorganic) and to perform a preliminary study of the potential applications in bone regeneration. The hybrids have been prepared by a sol-gel reaction using titanium isopropoxide as precursor of the inorganic component and polyurethane as the organic one. A series of polyurethanes has been prepared using different polyesters glycol succinate as soft segment, and 1,6-diisocyanatohexane (HDI) and butanediol (BD) as linear hard segment. The spectroscopy techniques used allow to confirm the formation of the required polyurethanes by the identification of bands related to carboxylic groups (COOH), and the amine groups (NH), and also the TiOH bonds and the bonds related to the interconnected network between the inorganic and the organic components from hybrids. The results from SEM/EDS show a homogeneous distribution of the inorganic component into the organic matrix. The nontoxic character of the hybrid (H400) was probed using MG-63 cell line with over 90% of cell viability. Finally, the formation of a hydroxyapatite layer in the material surface after 21days of soaking in SBF shows the bioactive character.

An adhesive elastomeric supramolecular polyurethane healable at body temperature

In this paper, we report the synthesis and healing ability of a non-cytotoxic supramolecular polyurethane network whose mechanical properties can be recovered efficiently (>99%) at the temperature of the human body (37 °C). Rheological analysis revealed an acceleration in the drop of the storage modulus above 37 °C, on account of the dissociation of the supramolecular polyurethane network, and this decrease in viscosity enables the efficient recovery of the mechanical properties. Microscopic and mechanical characterisation has shown that this material is able to recover mechanical properties across a damage site with minimal contact required between the interfaces and also demonstrated that the mechanical properties improved when compared to other low temperature healing elastomers or gel-like materials. The supramolecular polyurethane was found to be non-toxic in a cytotoxicity assay carried out in human skin fibroblasts (cell viability > 94% and non-significantly different compared to the untreated control). This supramolecular network material also exhibited excellent adhesion to pig skin and could be healed completely in situ post damage indicating that biomedical applications could be targeted, such as artificial skin or wound dressings with supramolecular materials of this type.

The chemistry and engineering of polymeric hydrogel adhesives for wound closure: a tutorial

Thistutorial reviewhighlights the key features and design requirements for the use of polymeric hydrogel adhesives in the clinic.

Hemostatic strategies for traumatic and surgical bleeding

Wide interest in new hemostatic approaches has stemmed from unmet needs in the hospital and on the battlefield. Many current commercial hemostatic agents fail to fulfill the design requirements of safety, efficacy, cost, and storage. Academic focus has led to the improvement of existing strategies as well as new developments. This review will identify and discuss the three major classes of hemostatic approaches: biologically derived materials, synthetically derived materials, and intravenously administered hemostatic agents. The general class is first discussed, then specific approaches discussed in detail, including the hemostatic mechanisms and the advancement of the method. As hemostatic strategies evolve and synthetic-biologic interactions are more fully understood, current clinical methodologies will be replaced.

Free-Standing Biodegradable Poly(lactic acid) Nanosheet for Sealing Operations in Surgery

A free-standing biodegradable nanosheet composed of poly(L-lactic acid) (PLLA) was shown to have excellent sealing efficacy for a gastric incision as a novel wound dressing material that did not require adhesive agents, and the PLLA nanosheet-induced wound repair showed neither scars nor tissue adhesion. This material may, therefore, be an ideal alternative to conventional tissue repairing procedures using suture/ligation in surgery.

Pasty injectable biodegradable polymers derived from natural acids

Pasty biodegradable polymers that can be mixed with drugs at room temperature and injected to tissue as neat composition are advantageous as they allow simple preparation and delivery of drugs, particularly for heat sensitive drugs. A series of biodegradable pasty poly (ester-anhydride)s were prepared from alkanedicarboxylic acids and ricinoleic acid and its oligomers by transesterification-repolymerization method. The polymers were characterized by common spectroscopic, chromatography, and thermal methods. Polymers containing 70% ricinoleic acid and 30% linear dicarboxylic acids with 4-10 methylene groups were synthesized. The melting point of these poly (ester-anhydride)s increased as the number of methylenes in the alkanedicarboxylic acid increased. Use of short oligomers of ricinoleic acid instead of ricinoleic acid itself increased the melting point and decreased the softness of the resulting polymers. The polymers released model drugs for a few weeks while being degraded to their fatty acid counterparts. Copolymerization of alkanedicarboxylic acids with ricinoleic acid resulted in pasty biodegradable polymers useful as injectable carriers for drugs.

Biodegradable Injectable In Situ Depot-Forming Drug Delivery Systems

The scope of drug-delivery systems has expanded significantly in recent years providing new ways to deliver life saving therapeutics to patients. The development of new injectable drug-delivery systems has provided new vistas and opened up unexplored horizons in the field of science, particularly in controlled drug delivery since these systems possess unique advantages over traditional ones, which include ease of application, and localized and prolonged drug delivery. In the past few years, an increasing number of such systems has been reported in the literature for various biomedical applications, including drug delivery, cell encapsulation, and tissue repair. These are injectable fluids that can be introduced into the body in a minimally invasive manner prior to solidifying or gelling within the desired site. For this purpose both natural (chitosan, alginates) as well as synthetic polymers (PEGylated polyesters, ricinoleic acid-based polymers) have been utilized. These systems have been explored widely for the delivery of various therapeutic agents ranging for anti-neoplastic agents like paclitaxel to proteins and peptides such as insulin, almost covering every segment of the pharmaceutical field. This manuscript focuses on the recent advancements in the area of in situ forming biodegradable polymeric drug-delivery systems.

Tape-casting technique can prepare ?-TCP sheets with uniform thickness and flexibility

The objective of this study is to propose a new fabrication technology for bone substitutes. In this study, a tape-casting method was used to prepare flexible beta-tricalcium phosphate (beta-TCP) sheets. A beta-TCP slurry containing a binder and plasticizer was used in a doctor blade system. The beta-TCP sheet obtained by this tape-casting method was highly flexible, enabling twisting and free-form shaping. The beta-TCP sheet was approximately 0.21 mm thick. X-ray diffraction and Fourier transform infrared spectrometry revealed that the structure of the beta-TCP component in the sheet is the same as that of the original beta-TCP powder. Observation by field-emission scanning electron microscopy showed that the beta-TCP sheet had a flat, microgranular surface. During the early stages, the tensile stress-strain curves of the beta-TCP sheet showed a nonlinear behavior until reaching the point of final fracture. This result was derived from the ductile property of the prepared beta-TCP sheet. In conclusion, a flexible beta-TCP sheet was easily prepared using a tape-casting technique. Fabrication using tape casting offers the advantages of enabling the preparation of ceramic sheets with precise thickness and not requiring expensive fabrication facilities.