Growth of human cells on polyethersulfone (PES) hollow fiber membranes

A Comprehensive Review of Hollow-Fiber Membrane Fabrication Methods across Biomedical, Biotechnological, and Environmental Domains

This work presents methods of obtaining polymeric hollow-fiber membranes produced via the dry-wet phase inversion method that were published in renowned specialized membrane publications in the years 2010-2020. Obtaining hollow-fiber membranes, unlike flat membranes, requires the use of a special installation for their production, the most important component of which is the hollow fiber forming spinneret. This method is most often used in obtaining membranes made of polysulfone, polyethersulfone, polyurethane, cellulose acetate, and its derivatives. Many factors affect the properties of the membranes obtained. By changing the parameters of the spinning process, we change the thickness of the membranes' walls and the diameter of the hollow fibers, which causes changes in the membranes' structure and, as a consequence, changes in their transport/separation parameters. The type of bore fluid affects the porosity of the inner epidermal layer or causes its atrophy. Porogenic compounds such as polyvinylpyrrolidones and polyethylene glycols and other substances that additionally increase the membrane porosity are often added to the polymer solution. Another example is a blend of two- or multi-component membranes and dual-layer membranes that are obtained using a three-nozzle spinneret. In dual-layer membranes, one layer is the membrane scaffolding, and the other is the separation layer. Also, the temperature during the process, the humidity, and the composition of the solution in the coagulating bath have impact on the parameters of the membranes obtained.

Polyethersulfone Polymer for Biomedical Applications and Biotechnology

Polymers stand out as promising materials extensively employed in biomedicine and biotechnology. Their versatile applications owe much to the field of tissue engineering, which seamlessly integrates materials engineering with medical science. In medicine, biomaterials serve as prototypes for organ development and as implants or scaffolds to facilitate body regeneration. With the growing demand for innovative solutions, synthetic and hybrid polymer materials, such as polyethersulfone, are gaining traction. This article offers a concise characterization of polyethersulfone followed by an exploration of its diverse applications in medical and biotechnological realms. It concludes by summarizing the significant roles of polyethersulfone in advancing both medicine and biotechnology, as outlined in the accompanying table.

A 3D-printed multi-compartment device that enables dynamic PK/PD profiles of antibiotics

Pathogens develop resistance to various drugs while under the selective pressure of antibiotics resulting in the emergence of bacterial strains that are resistant to multiple treatment options. Unfortunately, the resistance to antibiotics has also been accompanied by a reduction in the development of novel antibiotics to combat various pathogens. Current diagnostic tools, which are used in parts of the early developmental process of antibiotics, primarily consist of static susceptibility tests that do not resemble the pharmacokinetics of the therapy in vivo. Here, we designed and 3D-printed cubical inserts with membranes on two of the cube faces that allow diffusion of a molecule across two planes. These inserts are used with a 3D-printed device to create a two-compartment model to mimic the pharmacokinetics of a molecule in humans from multiple types of administration. Fluorescein was used to characterize the device and the diffusion of molecules from a flowing channel, through a membrane in the first plane (representing the primary compartment in vivo, or plasma), followed by measurement in the second compartment (that represents the interstitial fluid). The dynamic, two-compartment model was tested using both gram-positive and gram-negative bacterial strains in the secondary compartment. The ATP/OD600 (a measure of antibiotic activity) of a kanamycin-resistant E. coli strain challenged with the antibiotic levofloxacin increased after reaching an effective concentration of the antibiotic at 2 h, equating to a secondary compartment concentration of 3.5 ± 1.3 µM levofloxacin. The ATP/OD600 of a chloramphenicol-resistant B. subtilis strain challenged with the antibiotic levofloxacin remained steady or increased slightly after reaching an effective concentration of the antibiotic. The earliest statistical difference was detected 3 h after the start of the PK curve, which corresponds with a secondary compartment concentration of 4.8 ± 1.8 µM levofloxacin. Our results demonstrate that a fabricated 2-compartment model (1) provides realistic PK values to those published from in vivo studies and (2) can be used to determine antibiotic pharmacodynamics.

Fibrinogen supports self-renewal of mesenchymal stem cells under serum-reduced condition through autophagy activation

Mesenchymal stem cells (MSCs) are somatic stem cells used in cell transplantation therapy for tissue injuries and inflammatory diseases because of their ability to support tissue regeneration and to suppress inflammation. While their applications are expanding, needs for automation of culture procedures with reduction of animal-derived materials to meet stable quality and suppliability are also increasing. On the other hand, the development of molecules that safely support cell adherence and expansion on a variety of interfaces under the serum-reduced culture condition remains a challenge. We report here that fibrinogen enables MSC culture on various materials with low cell adhesion property even under serum-reduced culture conditions. Fibrinogen promoted MSC adhesion and proliferation by stabilizing basic fibroblast growth factor (bFGF), which was secreted in the culture medium by autocrine, and also activated autophagy to suppress cellar senescence. Fibrinogen coating allowed MSCs expansion even on the polyether sulfone membrane that represents very low cell adhesion, and the MSCs showed therapeutic effects in a pulmonary fibrosis model. This study demonstrates that fibrinogen is currently the safest and most widely available extracellular matrix and can be used as a versatile scaffold for cell culture in regenerative medicine.

Current approaches for the regeneration and reconstruction of ocular surface in dry eye

Significant research revealed the preocular tear film composition and regulations that remain vital for maintaining Ocular surface functional integrity. Inflammation triggered by many factors is the hallmark of Ocular surface disorders or dry eyes syndrome (DES). The tear deficiencies may lead to ocular surface desiccation, corneal ulceration and/or perforation, higher rates of infectious disease, and the risk of severe visual impairment and blindness. Clinical management remains largely supportive, palliative, and frequent, lifelong use of different lubricating agents. However, few advancements such as punctal plugs, non-steroidal anti-inflammatory drugs, and salivary gland autografts are of limited use. Cell-based therapies, tissue engineering, and regenerative medicine, have recently evolved as long-term cures for many diseases, including ophthalmic diseases. The present article focuses on the different regenerative medicine and reconstruction/bioengineered lacrimal gland formation strategies reported so far, along with their limiting factors and feasibility as an effective cure in future.

Overlooked? Underestimated? Effects of Substrate Curvature on Cell Behavior

In biological systems, form and function are inherently correlated. Despite this strong interdependence, the biological effect of curvature has been largely overlooked or underestimated, and consequently it has rarely been considered in the design of new cell-material interfaces. This review summarizes current understanding of the interplay between the curvature of a cell substrate and the related morphological and functional cellular response. In this context, we also discuss what is currently known about how, in the process of such a response, cells recognize curvature and accordingly reshape their membrane. Beyond this, we highlight state-of-the-art microtechnologies for engineering curved biomaterials at cell-scale, and describe aspects that impair or improve readouts of the pure effect of curvature on cells.

Extracellular matrix-coated polyethersulfone-TPGS hollow fiber membranes showing improved biocompatibility and uremic toxins removal for bioartificial kidney application

In this study, L-3, 4-dihydroxyphenylalanine and human collagen type IV were coated over the outer surface of the custom-made hollow fiber membranes (HFMs) with the objective of simultaneously improving biocompatibility leading to proliferation of human embryonic kidney cells-293 (HEK-293) and improving separation of uremic toxins, thereby making them suitable for bioartificial kidney application. Physicochemical characterization showed the development of coated HFMs, resulting in low hemolysis (0.25 ± 0.10%), low SC5b-9 marker level (7.95 ± 1.50 ng/mL), prolonged blood coagulation time, and minimal platelet adhesion, which indicated their improved human blood compatibility. Scanning electron microscopy and confocal laser scanning microscopy showed significantly improved attachment and proliferation of HEK-293 cells on the outer surface of the coated HFMs, which was supported by the results of glucose consumption and MTT cell proliferation assay. The solute rejection profile of these coated HFMs was compared favorably with that of the commercial dialyzer membranes. These coated HFMs showed a remarkable 1.6-3.2 fold improvement in reduction ratio of uremic toxins as compared to standard dialyzer membranes. These results clearly demonstrated that these extracellular matrix-coated HFMs can be a potential biocompatible substrate for the attachment and proliferation of HEK-293 cells and removal of uremic toxins from the simulated blood, which may find future application for bioartificial renal assist device.

Lactobionic acid-functionalized polyethersulfone hollow fiber membranes promote HepG2 attachment and function

Surface modification of polyethersulfone hollow fibers, which are important in bio-artificial liver, is increasingly used to improve biocompatibility and promote the adhesion and proliferation of hepatocytes resulting in improved cell functionality. Hepatocytes are anchorage-dependent cells, and membrane surface modification enhances the hepatic cell adhesion and proliferation. Specific interaction of the asialoglycoprotein receptor on hepatocyte cell surfaces with a galactose moiety enhances the attachment of the cells on a biocompatible substrate. In this study, the outer surface of the polyethersulfone (P) hollow fiber membranes (HFMs) was chemically modified by covalent coupling with lactobionic acid (LBA). The energy dispersive X-ray spectrometry elemental mapping, attenuated total reflectance-Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy confirmed the LBA-coupling on the outer surface of P-LBA HFMs. Hemocompatibility study indicated the suitability of the modified membranes with human blood. These membranes showed remarkably improved biocompatibility with human primary mesenchymal stem cells and HepG2 cells. Characteristic multi-cellular spheroids of HepG2 cells were observed under scanning electron and confocal microscopy. HepG2 cell functional activity was measured by quantifying the urea synthesis, albumin secretion and glucose consumption in the culture media, which indicated the improved HepG2 functions. These experimental results clearly suggest the potentiality of these LBA-modified P HFMs as a suitable biocompatible substrate for promoting HepG2 attachment and function leading to their application in bioreactors and bio-artificial liver devices.

Surface modification of polyethersulfone hollow fibers, which are important in bio-artificial liver, is increasingly used to improve biocompatibility and promote the adhesion and proliferation of hepatocytes resulting in improved cell functionality.

Modified polyether-sulfone membrane: a mini review

Polyethersulfone has been widely used as a promising material in medical applications and waste-treatment membranes since it provides excellent mechanical and thermal properties. Hydrophobicity of polyethersulfone is considered one main disadvantage of using this material because hydrophobic surface causes biofouling effects to the membrane which is always thought to be a serious limitation to the use of polyethersulfone in membrane technology. Chemical modification to the material is a promising solution to this problem. More specifically surface modification is an excellent technique to introduce hydrophilic properties and functional groups to the polyethersulfone membrane surface. This review covers chemical modifications of the polyethersulfone and covers different methods used to enhance the hydrophilicity of polyethersulfone membrane. In particular, the addition of amino functional groups to polyethersulfone is used as a fundamental method either to introduce hydrophilic properties or introduce nanomaterials to the surface of polyethersulfone membrane. This work reviews also previous research reports explored the use of amino functionalized polyethersulfone with different nanomaterials to induce biological activity and reduce fouling effects of the fabricated membrane.

Thermally-drawn fibers with spatially-selective porous domains

The control of mass transport using porous fibers is ubiquitous, with applications ranging from filtration to catalysis. Yet, to date, porous fibers have been made of single materials in simple geometries, with limited function. Here we report the fabrication and characterization of thermally drawn multimaterial fibers encompassing internal porous domains alongside non-porous insulating and conductive materials, in highly controlled device geometries. Our approach utilizes phase separation of a polymer solution during the preform-to-fiber drawing process, generating porosity as the fiber is drawn. Engineering the preform structure grants control over the geometry and materials architecture of the final porous fibers. Electrical conductivity of the selectrolyte-filled porous domains is substantiated through ionic conductivity measurements using electrodes thermally drawn in the cross-section. Pore size tunability between 500 nm–10 µm is established by regulating the phase separation kinetics. We further demonstrate capillary breakup of cylindrical porous structures porous microspheres within the fiber core.

Porous polymer fibers show great potential for a range of applications, but their simple structures typically limit their functionality. Here, the authors combine a thermal drawing process with polymer solution phase separation to fabricate porous multimaterial fibers with complex internal architectures.

Creating tissues from textiles: scalable nonwoven manufacturing techniques for fabrication of tissue engineering scaffolds

Electrospun nonwovens have been used extensively for tissue engineering applications due to their inherent similarities with respect to fibre size and morphology to that of native extracellular matrix (ECM). However, fabrication of large scaffold constructs is time consuming, may require harsh organic solvents, and often results in mechanical properties inferior to the tissue being treated. In order to translate nonwoven based tissue engineering scaffold strategies to clinical use, a high throughput, repeatable, scalable, and economic manufacturing process is needed. We suggest that nonwoven industry standard high throughput manufacturing techniques (meltblowing, spunbond, and carding) can meet this need. In this study, meltblown, spunbond and carded poly(lactic acid) (PLA) nonwovens were evaluated as tissue engineering scaffolds using human adipose derived stem cells (hASC) and compared to electrospun nonwovens. Scaffolds were seeded with hASC and viability, proliferation, and differentiation were evaluated over the course of 3 weeks. We found that nonwovens manufactured via these industry standard, commercially relevant manufacturing techniques were capable of supporting hASC attachment, proliferation, and both adipogenic and osteogenic differentiation of hASC, making them promising candidates for commercialization and translation of nonwoven scaffold based tissue engineering strategies.

Functional polyethersulfone particles for the removal of bilirubin

In this study, polyethersulfone/poly (glycidyl methacrylate) particles are prepared via in situ cross-linked polymerization coupled with a phase inversion technique. The surfaces of these particles are then further modified by grafting amino groups using tetraethylenepentamine, dethylenetriamine, ethylenediamine, or 1,6-hexanediamine for the removal of bilirubin. The particles are characterized by Flourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Batch adsorption experiments are performed to verify the adsorption capability, and the effect of bilirubin initial concentration, bovine serum albumin concentration, and solution ionic strength on the adsorption is also investigated. In addition, both adsorption kinetic and isotherm models are applied to analyze the adsorption process of bilirubin, and a particle column is used to further study the bilirubin removal ability.To prove that the method was a universal portal to prepare functional particles, polysulfone, polystyrene, and poly(vinylidene fluoride) based functional particles were also prepared and used for the removal of bilirubin. This study and the results indicated that the particles had a great potential to be used in hemoperfusion treatment for hyperbilirubinemia.

Surface modification of poly(ether sulfone) membrane with a synthesized negatively charged copolymer

In this study, we provide a new method to modify poly(ether sulfone) (PES) membrane with good biocompatibility, for which diazotized PES (PES-N2(+)) membrane is covalently coated by a negatively charged copolymer of sodium sulfonated poly(styrene-alt-maleic anhydride) (NaSPS-MA). First, aminated PES (PES-NH2) is synthesized by nitro reduction reaction of nitro-PES (PES-NO2), and then blends with pristine PES to prepare PES/PES-NH2 membrane; then the membrane is treated with NaNO2 aqueous solution at acid condition; after surface diazo reaction, surface positively charged PES/PES-N2(+) membrane is prepared. Second, poly(styrene-alt-maleic anhydride) (PS-alt-MA) is synthesized, then sulfonated and treated by sodium hydroxide solution to obtain sodium sulfonated (PS-alt-MA) (NaSPS-MA). Finally, the negatively charged NaSPS-MA copolymer is coated onto the surface positively charged PES/PES-N2(+) membrane via electrostatic interaction; after UV-cross-linking, the linkage between the PES-N2(+) and NaSPS-MA changes to a covalent bond. The surface-modified PES membrane is characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS) analyses, and surface zeta potential analyses. The modified membrane exhibits good hemocompatibility and cytocompatibility, and the improved biocompatibility might have resulted from the existence of the hydrophilic groups (sodium carboxylate (-COONa) and sodium sulfonate (-SO3Na)). Moreover, the stability of the modified membrane is also investigated. The results indicated that the modified PES membrane using negatively charged copolymers had a lot of potential in blood purification fields and bioartificial liver supports for a long time.

Quantification of confocal images of biofilms grown on irregular surfaces

Bacterial biofilms grow on many types of surfaces, including flat surfaces such as glass and metal and irregular surfaces such as rocks, biological tissues and polymers. While laser scanning confocal microscopy can provide high-resolution images of biofilms grown on any surface, quantification of biofilm-associated bacteria is currently limited to bacteria grown on flat surfaces. This can limit researchers studying irregular surfaces to qualitative analysis or quantification of only the total bacteria in an image. In this work, we introduce a new algorithm called modified connected volume filtration (MCVF) to quantify bacteria grown on top of an irregular surface that is fluorescently labeled or reflective. Using the MCVF algorithm, two new quantification parameters are introduced. The modified substratum coverage parameter enables quantification of the connected-biofilm bacteria on top of the surface and on the imaging substratum. The utility of MCVF and the modified substratum coverage parameter were shown with Pseudomonas aeruginosa and Staphylococcus aureus biofilms grown on human airway epithelial cells. A second parameter, the percent association, provides quantified data on the colocalization of the bacteria with a labeled component, including bacteria within a labeled tissue. The utility of quantifying the bacteria associated with the cell cytoplasm was demonstrated with Neisseria gonorrhoeae biofilms grown on cervical epithelial cells. This algorithm provides more flexibility and quantitative ability to researchers studying biofilms grown on a variety of irregular substrata.

Design and preparation of polymeric scaffolds for tissue engineering

Polymeric scaffolds for tissue engineering can be prepared with a multitude of different techniques. Many diverse approaches have recently been under development. The adaptation of conventional preparation methods, such as electrospinning, induced phase separation of polymer solutions or porogen leaching, which were developed originally for other research areas, are described. In addition, the utilization of novel fabrication techniques, such as rapid prototyping or solid free-form procedures, with their many different methods to generate or to embody scaffold structures or the usage of self-assembly systems that mimic the properties of the extracellular matrix are also described. These methods are reviewed and evaluated with specific regard to their utility in the area of tissue engineering.

Hollow fiber culture accelerates differentiation of Caco-2 cells

Caco-2 cells usually require 21 days of culture for developing sufficient differentiation in traditional two-dimensional Transwell culture, deviating far away from the quick differentiation of enterocytes in vivo. The recently proposed three-dimensional cultures of Caco-2 cells, though imitating the villi/crypt-like microstructure of intestinal epithelium, showed no effect on accelerating the differentiation of Caco-2 cells. In this study, a novel culture of Caco-2 cells on hollow fiber bioreactor was applied to morphologically mimic the human small intestine lumen for accelerating the expression of intestine functions. The porous hollow fibers of polyethersulfone (PES), a suitable membrane material for Caco-2 cell culture, successfully promoted cells to form confluent monolayer on the inner surface. The differentiated functions of Caco-2 cells, represented by alkaline phosphatase, γ-glutamyltransferase, and P-glycoprotein activity, were greatly higher in a 10-day hollow fiber culture than in a 21-day Transwell culture. Moreover, the Caco-2 cells on PES hollow fibers expressed higher F-actin and zonula occludens-1 protein than those on Transwell culture, indicative of an increased mechanical stress in Caco-2 cells on PES hollow fibers. The accelerated differentiation of Caco-2 cells on PES hollow fibers was unassociated with membrane chemical composition and surface roughness, but could be stimulated by hollow fiber configuration, since PES flat membranes with either rough or smooth surface failed to enhance the differentiation of Caco-2. Therefore, the accelerated expression of Caco-2 cell function on hollow fiber culture might show great values in simulation of the tissue microenvironment in vivo and guide the construction of intestinal tissue engineering apparatus.

Effects of silk fibroin fiber incorporation on mechanical properties, endothelial cell colonization and vascularization of PDLLA scaffolds

Attainment of functional vascularization of engineered constructs is one of the fundamental challenges of tissue engineering. However, the development of an extracellular matrix in most tissues, including bone, is dependent upon the establishment of a well developed vascular supply. In this study a poly(d,l-lactic acid) (PDLLA) salt-leached sponge was modified by incorporation of silk fibroin fibers to create a multicomponent scaffold, in an effort to better support endothelial cell colonization and to promote in vivo vascularization. Scaffolds with and without silk fibroin fibers were compared for microstructure, mechanical properties, ability to maintain cell populations in vitro as well as to permit vascular ingrowth into acellular constructs in vivo. We demonstrated that adding silk fibroin fibers to a PDLLA salt-leached sponge enhanced scaffold properties and heightened its capacity to support endothelial cells in vitro and to promote vascularization in vivo. Therefore refinement of scaffold properties by inclusion of materials with beneficial attributes may promote and shape cellular responses.

Osteogenic and angiogenic potentials of monocultured and co-cultured human-bone-marrow-derived mesenchymal stem cells and human-umbilical-vein endothelial cells on three-dimensional porous beta-tricalcium phosphate scaffold

The use of biodegradable beta-tricalcium phosphate (β-TCP) scaffolds holds great promise for bone tissue engineering. However, the effects of β-TCP on bone and endothelial cells are not fully understood. This study aimed to investigate cell proliferation and differentiation of mono- or co-cultured human-bone-marrow-derived mesenchymal stem cells (hBMSCs) and human-umbilical-vein endothelial cells (HUVECs) on a three-dimensional porous, biodegradable β-TCP scaffold. In co-culture studies, the ratios of hBMSCs:HUVECs were 5:1, 1:1 and 1:5. Cellular morphologies of HUVECs, hBMSCs and co-cultured HUVECs/hBMSCs on the β-TCP scaffolds were monitored using confocal and scanning electron microscopy. Cell proliferation was monitored by measuring the amount of double-stranded DNA (dsDNA) whereas hBMSC and HUVEC differentiation was assessed using the osteogenic and angiogenic markers, alkaline phosphatase (ALP) and PECAM-1 (CD31), respectively. Results show that HUVECs, hBMSCs and hBMSCs/HUVECs adhered to and proliferated well on the β-TCP scaffolds. In monoculture, hBMSCs grew faster than HUVECs on the β-TCP scaffolds after 7 days, but HUVECs reached similar levels of proliferation after 14 days. In monoculture, β-TCP scaffolds promoted ALP activities of both hBMSCs and HUVECs when compared to those grown on tissue culture well plates. ALP activity of cells in co-culture was higher than that of hBMSCs in monoculture. Real-time polymerase chain reaction results indicate that runx2 and alp gene expression in monocultured hBMSCs remained unchanged at days 7 and 14, but alp gene expression was significantly increased in hBMSC co-cultures when the contribution of individual cell types was not distinguished.

Scaffold vascularization in vivo driven by primary human osteoblasts in concert with host inflammatory cells

Successful cell-based tissue engineering requires a rapid and thorough vascularization in order to ensure long-term implant survival and tissue integration. The vascularization of a scaffold is a complex process, and is modulated by the presence of transplanted cells, exogenous and endogenous signaling proteins, and the host tissue reaction, among other influencing factors. This paper presents evidence for the significance of pre-seeded osteoblasts for the in vivo vascularization of a biodegradable scaffold. Human osteoblasts, cultured on silk fibroin micronets in vitro, migrated throughout the interconnected pores of the scaffold and produced extensive bone matrix. When these constructs were implanted in SCID mice, a rapid and thorough vascularization of the scaffold by the host blood capillaries occurred. This profound response was not seen for the silk fibroin scaffold alone. Moreover, when the pre-cultivation time of human osteoblasts was reduced from 14 days to only 24 h, the significant effect these cells exerted on vascularization rate in vivo was still detectable. From these studies, we conclude that matrix and soluble factors produced by osteoblasts can serve to instruct host endothelial cells to migrate, proliferate, and initiate the process of scaffold vascularization. This finding represents a potential paradigm shift for the field of tissue engineering, especially in bone, as traditional strategies to enhance scaffold vascularization have focused on endovascular cells and regarded osteoblasts primarily as cell targets for mineralization. In addition, the migration of host macrophages and multinucleated giant cells into the scaffold was also found to influence the vascularization of the biomaterial. Therefore, the robust effect on scaffold vascularization seen by pre-culturing with osteoblasts appears to occur in concert with the pro-angiogenic stimuli arising from host immune cells.

The promotion of stemness and pluripotency following feeder-free culture of embryonic stem cells on collagen-grafted 3-dimensional nanofibrous scaffold

The components of extracellular matrix (ECM) may substitute for feeder layers that promote the self-renewal pathways in embryonic stem cells. Surface modification of electrospun nanofibrous scaffolds have been studied to closely resemble natural ECMs and support in vitro and in vivo proliferation, pluripotency and differentiation of stem cells. In this study, we analyzed the maintenance of stemness and pluripotency of the mouse embryonic stem cell (mESC) following feeder-free culture on collagen-grafted polyethersulfone (PES-COL) electrospun nanofibrous scaffold. Our results showed that, the mESCs cultured for seven passages on PES-COL scaffolds had a typical undifferentiated morphology, enhanced proliferation, stable diploid normal karyotype, and continued expression of stemness and pluripotency-associated markers, Oct-4, Nanog, SSEA-1, and Alkaline phosphatase (ALP) in comparison with PES scaffolds and gelatin-coated plate. Moreover, these cells retained their in vitro and in vivo pluripotency. Our results indicated the enhanced infiltration and teratoma formation of mESCs in PES-COL. Collagen-grafted polyethersulfone nanofibrous scaffold has potential for feeder-free culture of pluripotent stem cells because of its 3-dimensional structure and bioactivity which enhance pluripotency, proliferation, differentiation, and infiltration of embryonic stem cells.

Porous and single-skinned polyethersulfone membranes support the growth of HepG2 cells: A potential biomaterial for bioartificial liver systems

In this study, we evaluated a porous and single-layer skin polyethersulfone (PES) membrane as a material for use in hybrid bioartificial liver support systems. The PES membrane has been characterized as a single-layer skin structure, with a rough porous surface. Specifically, we studied the ability of the human hepatoblastoma cell lines (HepG2) to adhere, grow, and spread on the PES membrane. Furthermore, we examined albumin secretion, low-density lipoprotein uptake, and CYP450 activity of HepG2 cells that grew on the membrane. HepG2 cells readily adhered onto the outer surfaces of PES membranes. Over time, HepG2 cells proliferated actively, and confluent monolayer of cells covered the available surface area of the membrane, eventually forming cell clusters and three-dimensional aggregates. Furthermore, HepG2 cells grown on PES membranes maintained highly specific functions, including uptake capability, biosynthesis and biotransformation. These results indicate that PES membranes are potential substrates for the growth of human liver cells and may be useful in the construction of hollow fiber bioreactors. Porous and single-layer skin PES membranes and HepG2 cells may be potential biomaterials for the development of biohybrid liver devices.

Phenotypic and functional characterization of human bone marrow stromal cells in hollow-fibre bioreactors

The transplantation of human bone marrow stromal cells (BMSCs) is a novel immunotherapeutic approach that is currently being explored in many clinical settings. Evidence suggests that the efficacy of cell transplantation is directly associated with soluble factors released by human BMSCs. In order to harness these secreted factors, we integrated BMSCs into large-scale hollow-fibre bioreactor devices in which the cells, separated by a semipermeable polyethersulphone (PES) membrane, can directly and continuously release therapeutic factors into the blood stream. BMSCs were found to be rapidly adherent and exhibited long-term viability on PES fibres. The cells also preserved their immunophenotype under physiological fluid flow rates in the bioreactor, and exhibited no signs of differentiation during device operation, but still retained the capacity to differentiate into osteoblastic lineages. BMSC devices released growth factors and cytokines at comparable levels on a per-cell basis to conventional cell culture platforms. Finally, we utilized a potency assay to demonstrate the therapeutic potential of the collected secreted factors from the BMSC devices. In summary, we have shown that culturing BMSCs in a large-scale hollow-fibre bioreactor is feasible without deleterious effects on phenotype, thus providing a platform for collecting and delivering the paracrine secretions of these cells.

Surface characteristics of acrylic modified polysulfone membranes improves renal proximal tubule cell adhesion and spreading

Current polyvinylpyrrolidone-modified polysulfone (PVP-PSU) membranes in haemodialysers do not facilitate the attachment and proliferation of renal proximal tubule cells (RPTCs). For bioartificial kidney (BAK) development expensive extracellular matrices are employed to ensure the PVP-PSU membranes can serve as a substrate for RPTCs. In this study we modified PSU using an acrylic monomer (am-PSU) and polymerization using ultraviolet irradiation. We demonstrated that on adjusting the PSU or acrylic content of the membranes the wettability and surface chemistry were altered, and this affected the amount of fibronectin (Fn) that was adsorbed onto the membranes. Using an integrin blocking assay we ascertained that Fn is an important extracellular matrix component that mediates RPTC attachment. The amount of Fn adsorbed also led to different bioresponses of RPTCs, which were evaluated using attachment and proliferation assays and qualitative quantification of vinculin, focal adhesion kinase, zonula occludens and Na(+)/K(+) ATPase. Our optimized membrane, am-PSU1 (21.4% C-O groups, 19.1% PVP-PSU; contact angle 71.5-80.80, PVP-PSU: 52.4-67.50), supports a confluent monolayer of RPTCs and prevents creatinine and inulin diffusion from the apical to the basal side, meeting the requirements for application in BAKs. However, further in vivo evaluation to assess the full functionality of RPTCs on am-PSU1 is required.

The biocompatibility and separation performance of antioxidative polysulfone/vitamin E TPGS composite hollow fiber membranes

The extended interaction of blood with certain materials like hemodialysis membranes results in the activation of cellular element as well as inflammatory response. This results in hypersensitive reactions and increased reactive oxygen species, which occurs during or immediately after dialysis. Although polysulfone (Psf) hollow fiber has been commercially used for acute and chronic hemodialysis, its biocompatibility remains a major concern. To overcome this, we have successfully made composite Psf hollow fiber membrane consisting of hydrophilic/hydrophobic micro-domains of Psf and Vitamin E TPGS (TPGS). These were prepared by dry-wet spinning using 5, 10, 15, 20 wt% TPGS as an additive in dope solution. TPGS was successfully entrapped in Psf hollow fiber, as confirmed by ATR-FTIR and TGA. The selective skin was formed at inner side of hollow fibers, as confirmed by SEM study. In vitro biocompatibility and performance of the Psf/TPGS composite membranes were examined, with cytotoxicity, ROS generation, hemolysis, platelet adhesion, contact and complement activation, protein adsorption, ultrafiltration coefficient, solute rejection and urea clearance. We show that antioxidative composite Psf exhibits enhanced biocompatibility, and the membranes show high flux and high urea clearance, about two orders of magnitude better than commercial hemodialysis membranes on a unit area basis.

Human endothelial and osteoblast co-cultures on 3D biomaterials

Increasingly, in vitro experiments are being used to evaluate the cell compatibility of novel biomaterials. Single cell cultures have been used to determine how well cells attach, grow, and exhibit characteristic functions on these materials and the outcome of such tests is generally accepted as an indicator of biocompatibility. However, organs and tissues are not made up of one cell type and the interaction of cells is known to be an essential factor for physiological cell function. To more accurately examine biomaterials for bone regeneration, we have developed methods to coculture osteoblasts, which are the primary cell type making up bone, and endothelial cells, which form the vasculature supplying cells in the bone with oxygen and nutrients to survive on 2- and 3-D biomaterials.

Tissue engineering of composite grafts: Cocultivation of human oral keratinocytes and human osteoblast-like cells on laminin-coated polycarbonate membranes and equine collagen membranes under different culture conditions

In complex craniomaxillofacial defects, the simultaneous reconstruction of hard and soft tissue is often necessary. Until now, oral keratinocytes and osteoblast-like cells have not been cocultivated on the same carrier. For the first time, the cocultivation of human oral keratinocytes and human osteoblast-like cells has been investigated in this study. Different carriers (laminin-coated polycarbonate and equine collagen membranes) and various culture conditions were examined. Human oral keratinocytes and human osteoblast-like cells from five patients were isolated from tissue samples, seeded on the opposite sides of the carriers and cultivated for 1 and 2 weeks under static conditions in an incubator and in a perfusion chamber. Proliferation and morphology of the cells were analyzed by EZ4U-tests, light microscopy, and scanning electron microscopy. Cocultivation of both cell-types seeded on one carrier was possible. Quantitative and qualitative growth was significantly better on collagen membranes when compared with laminin-coated polycarbonate membranes independent of the culture conditions. Using perfusion culture in comparison to static culture, the increase of cell proliferation after 2 weeks of cultivation when compared with the proliferation after 1 week was significantly lower, independent of the carriers used. In conclusion, the contemporaneous cultivation of human oral keratinocytes and human osteoblast-like cells on the same carrier is possible, a prerequisite for planned in vivo studies. As carrier collagen is superior to laminin-coated polycarbonate membranes. Regarding the development over time, the increase of proliferation rate is lower in perfusion culture. Examinations of cellular differentiation over time under various culture conditions will be subject of further investigations.

Vascularization in bone tissue engineering: physiology, current strategies, major hurdles and future challenges

The lack of a functional vascular supply has, to a large extent, hampered the whole range of clinical applications of 'successful' laboratory-based bone tissue engineering strategies. To the present, grafts have been dependent on post-implant vascularization, which jeopardizes graft integration and often leads to its failure. For this reason, the development of strategies that could effectively induce the establishment of a microcirculation in the engineered constructs has become a major goal for the tissue engineering research community. This review addresses the role and importance of the development of a vascular network in bone tissue engineering and provides an overview of the most up to date research efforts to develop such a network.

Collagen-embedded hydroxylapatite-beta-tricalcium phosphate-silicon dioxide bone substitute granules assist rapid vascularization and promote cell growth

In the present study we assessed the biocompatibility in vitro and in vivo of a low-temperature sol-gel-manufactured SiO(2)-based bone graft substitute. Human primary osteoblasts and the osteoblastic cell line, MG63, cultured on the SiO(2) biomatrix in monoculture retained their osteoblastic morphology and cellular functionality in vitro. The effect of the biomaterial in vivo and its vascularization potential was tested subcutaneously in Wistar rats and demonstrated both rapid vascularization and good integration within the peri-implant tissue. Scaffold degradation was progressive during the first month after implantation, with tartrate-resistant acid phosphatase-positive macrophages being present and promoting scaffold degradation from an early stage. This manuscript describes successful osteoblastic growth promotion in vitro and a promising biomaterial integration and vasculogenesis in vivo for a possible therapeutic application of this biomatrix in future clinical studies.

A porous scaffold for bone tissue engineering/45S5 Bioglass derived porous scaffolds for co-culturing osteoblasts and endothelial cells

One of the major factors in the therapeutic success of bone tissue engineered scaffolds is the ability of the construct to vascularise post implantation. One of the approaches for improving vascularisation within scaffolds has been to co-culture human umbilical vein endothelial cells (HUVECS) with human osteoblasts (HOBS), which may then promote vascularisation and facilitate tissue regeneration. However, in order to mimic a natural physiological niche it is vital that the scaffold is able to support and promote the proliferation of both cell types and thus become a viable tissue engineered construct. In this study we report the development of a porous bioactive glass-ceramic construct and examine the interaction with human umbilical vein endothelial cells (HUVEC's) and human osteoblast-like cell both in mono and co-culture. The study clearly demonstrated that the scaffolds were able to support both endothelial and human osteoblast cell proliferation both in mono and co-culture. A comparison of the proliferation response of HUVEC and HOB in mono-culture on the test scaffolds and the commercial porous hydroxyapatite was assessed over a 28 day period (4, 7, 14, 21 and 28 days), using alamar Blue assay. Proliferation of HOB cells seeded in the scaffolds was consistently shown to be above those observed on commercial HA scaffolds.