Ectopic bone formation in rat marrow stromal cell/titanium fiber mesh scaffold constructs: Effect of initial cell phenotype

Histological evaluation of titanium fiber mesh-coated implants in a rabbit femoral condyle model

OBJECTIVES

This study was aimed to comparatively evaluate new bone formation into the pores of a flexible titanium fiber mesh (TFM) applied on the surface of implant.

METHODS

Twenty-eight custom made cylindrical titanium implants (4 ×10 mm) with and without a layer of two different types of TFM (fiber diameter of 22 µm and 50 µm, volumetric porosity ~70%) were manufactured and installed bilaterally in the femoral condyles of 14 rabbits. The elastic modulus for these two TFM types was ~20 GPa and ~5 GPa respectively, whereas the solid titanium was ~110 GPa. The implants (Control, TFM-22, TFM-50) were retrieved after 14 weeks of healing and prepared for histological assessment. The percentage of the bone area (BA%), the bone-to-implant contact (BIC%) and amount were determined.

RESULTS

Newly formed bone into mesh porosity was observed for all three types of implants. Histomorphometric analyses revealed significantly higher (~2.5 fold) BA% values for TFM-22 implants (30.9 ± 9.5%) compared to Control implants (12.7 ± 6.0%), whereas BA% for TMF-50 did not significantly differ compared with Control implants. Furthermore, both TFM-22 and TFM-50 implants showed significantly higher BIC% values (64.9 ± 14.0%, ~2.5 fold; 47.1 ± 14.1%, ~2 fold) compared to Control (23.6 ± 17.4%). Finally, TFM-22 implants showed more and thicker trabeculae in the peri-implant region.

SIGNIFICANCE

This in vivo study demonstrated that implants with a flexible coating of TFM improve bone formation within the inter-fiber space and the peri-implant region.

Comprehensive Survey on Nanobiomaterials for Bone Tissue Engineering Applications

One of the most important ideas ever produced by the application of materials science to the medical field is the notion of biomaterials. The nanostructured biomaterials play a crucial role in the development of new treatment strategies including not only the replacement of tissues and organs, but also repair and regeneration. They are designed to interact with damaged or injured tissues to induce regeneration, or as a forest for the production of laboratory tissues, so they must be micro-environmentally sensitive. The existing materials have many limitations, including impaired cell attachment, proliferation, and toxicity. Nanotechnology may open new avenues to bone tissue engineering by forming new assemblies similar in size and shape to the existing hierarchical bone structure. Organic and inorganic nanobiomaterials are increasingly used for bone tissue engineering applications because they may allow to overcome some of the current restrictions entailed by bone regeneration methods. This review covers the applications of different organic and inorganic nanobiomaterials in the field of hard tissue engineering.

Advancing application of mesenchymal stem cell-based bone tissue regeneration

Reconstruction of bone defects, especially the critical-sized defects, with mechanical integrity to the skeleton is important for a patient's rehabilitation, however, it still remains challenge. Utilizing biomaterials of human origin bone tissue for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural bone tissue with regard to its properties. However, not only efficacious and safe but also cost-effective and convenient are important for regenerative biomaterials to achieve clinical translation and commercial success. Advances in our understanding of regenerative biomaterials and their roles in new bone formation potentially opened a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multicomponent construction of native extracellular matrix (ECM) for cell accommodation, the ECM-mimicking biomaterials and the naturally decellularized ECM scaffolds were used to create new tissues for bone restoration. On the other hand, with the going deep in understanding of mesenchymal stem cells (MSCs), they have shown great promise to jumpstart and facilitate bone healing even in diseased microenvironments with pharmacology-based endogenous MSCs rescue/mobilization, systemic/local infusion of MSCs for cytotherapy, biomaterials-based approaches, cell-sheets/-aggregates technology and usage of subcellular vesicles of MSCs to achieve scaffolds-free or cell-free delivery system, all of them have been shown can improve MSCs-mediated regeneration in preclinical studies and several clinical trials. Here, following an overview discussed autogenous/allogenic and ECM-based bone biomaterials for reconstructive surgery and applications of MSCs-mediated bone healing and tissue engineering to further offer principles and effective strategies to optimize MSCs-based bone regeneration.

•

Focusing on MSCs based bone regeneration.

•

Discussed cytotherapy, cell-free therapies and cell-aggregates technology in detail.

•

Stating the approaches of MSCs in diseased microenvironments.

Porous titanium fiber mesh with tailored elasticity and its effect on stromal cells

Porous titanium fiber mesh (TFM) is considered a suitable scaffold material for bone reconstruction. Also, TFM can be used to cover the surface of bone‐anchored devices, that is, orthopedic or dental implants. The titanium fiber size has an effect of the stiffness as well as porosity of the titanium mesh, which can influence the behavior of bone forming cells. Therefore, the aim of this study was to vary TFM composition, in order to achieve different stiffness, and to assess the effects of such variation on the behavior of bone marrow‐derived stromal cells (BMSCs). With that purpose, nine types of TFM (porosities 60–87%; fiber size 22–50 μm), were examined for their mechanical properties as well as their effect on the proliferation and differentiation of rat bone marrow‐derived stromal cells (rBMSCs) up to 21 days. Dynamic mechanical analysis revealed that the stiffness of TFM were lower than of solid titanium and decreased with larger fiber sizes. The stiffness could effectively be tailored by altering fiber properties, which altered the pore simultaneously. For the 22 and 35 μm size fiber meshes with the highest porosity, the stiffness closely matched the value found in literature for cortical bone. Finally, all tested TFM types supported the growth and differentiation of rBMSCs. We concluded that TFM material has been proven cytocompatible. Further preclinical studies are needed to assess which TFM type is most suitable as clinical use for bone ingrowth and bone regeneration.

Electrochemical Studies on CaP Electrodeposition on Three Dimensional Surfaces of Selective Laser Melted Titanium Scaffold

In this work, calcium phosphate (CaP) coating was electrodeposited on the three dimensional surface of SLM-Ti scaffolds. The in situ measurement showed that the potential variation within 5 mm thickness porous selective laser melting (SLM)-Ti samples was about 80 mV as a result of the low conductivity of CaP coatings. SEM observation results revealed that the coating morphology depended on the distance between the surface position of porous SLM-Ti electrode and the auxiliary electrode. Based on the compared electrochemical experiments, it was found that the top and the bottom surfaces of SLM-Ti scaffolds exhibited continuous nucleation and instantaneous nucleation behavior respectively. The Electrochemical impedance spectroscopy (EIS) results also revealed that the electrodeposition processes at different depth of SLM-Ti scaffolds were not synchronized. These differences were ultimately caused by the non-uniform distribution of the potential and the current inside porous SLM-Ti electrodes. The present work provides a basic research method for studying the mechanism of the electrochemical process on three dimensional surfaces of SLM-Ti scaffolds.

Gelfoam haemostatic agent with or without autologous bone marrow-derived stem cells for the regeneration of critical-size mandibular defects in the rabbit

This study evaluated the effect of Gelfoam sponge with and without autologous bone marrow-derived stem cells (BMSCs) on bone regeneration in critical-size mandibular defects. The study involved 56 New Zealand rabbits assigned to four groups (14 in each). The osseous defects in group I were irrigated with normal saline, those in group II were grafted with autogenous tibial bone, and those in group III were filled with Gelfoam sponge. Group IV defects were treated as for group III, but the interface between the Gelfoam sponge and bone surface was injected with BMSCs. At the end of 4weeks, seven rabbits in each group were euthanized; the remaining animals were euthanized at the end of the experiment, at 8 weeks postoperative. The percentage area of newly formed bone was significantly higher in group IV at week 4 (0.030±0.01%) and week 8 (0.060±0.03%) than in group I (0.01±0.00% and 0.02±0.00%, respectively) and group III (0.08±0.01% and 0.015±0.02%, respectively), but was lower than that in group II (0.038±0.02% and 0.082±0.01%, respectively). Thus, the combination of Gelfoam and autologous BMSCs promoted the regeneration of mandibular critical-size defects better than the use of Gelfoam alone. However, the amount of newly generated bone was lower than in defects grafted with autogenous bone.

Effect of Rotary Instrument Mineral Oil Lubricant on Osseointegration: A Randomized, Blinded Study in Rabbits

The mechanisms of early failures in dental implant osseointegration are unclear. A possible cause of low levels of bone formation is lubricant contamination on implants during insertion. To explore the impact of lubricant contamination on dental implants, we used 5 New Zealand rabbits and inserted 2 implants per tibia in each animal for a total of 4 implants per animal (20 implants in total). In general, bicorticalization was achieved. The first implant was placed as suggested by the manufacturer with no lubricant used (control). The second implant was placed using a freshly lubricated contra-angle handpiece, which was used only for the test implants. Implant allocation was randomized, and the examining histologist was blinded to the results. All implants were placed by the same surgeon. The animals were maintained in accordance with animal experimentation guidelines. None of the implants failed to osseointegrate. Moreover, no significant difference was observed between the test and control groups. Based on the results of this study, the use of rotary instrument mineral oil lubricant did not jeopardize the osseointegration of dental implants in New Zealand rabbits.

Autogenous bone particle/titanium fiber composites for bone regeneration in a rabbit radius critical-size defect model

PURPOSE

To explore the effects of autogenous bone particle/titanium fiber composites on repairing segmental bone defects in rabbits.

MATERIALS AND METHODS

A model of bilateral radial bone defect was established in 36 New Zealand white rabbits which were randomly divided into 3 groups according to filling materials used for bilaterally defect treatment: in group C, 9 animal bone defect areas were prepared into simple bilateral radius bone defect (empty sham) as the control group; 27 rabbits were used in groups ABP and ABP-Ti. In group ABP, left defects were simply implanted with autogenous bone particles; meanwhile, group ABP-Ti animals had right defects implanted with autogenous bone particle/titanium fiber composites. Animals were sacrificed at 4, 8, and 12 weeks, respectively, after operation.

RESULTS

Micro-CT showed that group C could not complete bone regeneration. Bone volume to tissue volume values in group ABP-Ti were better than group ABP. From histology and histomorphometry Groups ABP and ABP-Ti achieved bone repair, the bone formation of group ABP-Ti was better. The mechanical strength of group ABP-Ti was superior to that of other groups.

CONCLUSIONS

These results confirmed the effectiveness of autologous bone particle/titanium fiber composites for promoting bone regeneration and mechanical strength.

Crosstalk between Substrates and Rho-Associated Kinase Inhibitors in Cryopreservation of Tissue-Engineered Constructs

It is documented that human mesenchymal stem cells (hMSCs) can be differentiated into various types of cells to present a tool for tissue engineering and regenerative medicine. Thus, the preservation of stem cells is a crucial factor for their effective long-term storage that further facilitates their continuous supply and transportation for application in regenerative medicine. Cryopreservation is the most important, practicable, and the only established mechanism for long-term preservation of cells, tissues, and organs, and engineered tissues; thus, it is the key step for the improvement of tissue engineering. A significant portion of MSCs loses cellular viability while freeze-thawing, which represents an important technical limitation to achieving sufficient viable cell numbers for maximum efficacy. Several natural and synthetic materials are extensively used as substrates for tissue engineering constructs and cryopreservation because they promote cell attachment and proliferation. Rho-associated kinase (ROCK) inhibitors can improve the physiological function and postthaw viability of cryopreserved MSCs. This review proposes a crosstalk between substrate topology and interaction of cells with ROCK inhibitors. It is shown that incorporation of ionic nanoparticles in the presence of an external electrical field improves the generation of ROCK inhibitors to safeguard cellular viability for the enhanced cryopreservation of engineered tissues.

HPLC-MS/MS: A potential method to track the in vivo degradation of zein-based biomaterial

Given the inadequacies of existing clinic tracking strategies, such as isotopic tracer techniques, one of the major thrusts in protein-based tissue engineering substitutes prior to use in clinic is to develop a safe technique that can effectively track their degradation in vivo. Keeping in view the possible application of a natural polymer, zein as a novel bone substitute, with the advantages of good bio-compatibility, bio-degradability and outstanding mechanical properties, we attempted here to construct a HPLC-MS/MS method to track the in vivo degradation of zein porous scaffold. Histological observation and immunohistochemistry analysis using the intramuscular implantation model of rats clearly indicated that zein porous scaffold has certain osteoinductive ability. More importantly, HPLC-MS/MS detected the changes of amino acids levels in plasma and different organs after the implantation of scaffolds. With these findings, it could be concluded that HPLC-MS/MS might be a potential method to track the in vivo degradation of protein-based tissue engineering substitutes. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 606-613, 2018.

Hybrid composites of mesenchymal stem cell sheets, hydroxyapatite, and platelet-rich fibrin granules for bone regeneration in a rabbit calvarial critical-size defect model

The reconstruction of large bone defects remains a major clinical challenge, and tissue engineering is a promising technique for resolving this problem. Many attempts have been made to optimize bone tissue engineering protocols. The aim of the present study was to develop a process incorporating mesenchymal stem cell (MSC) sheets with nanoscale hydroxyapatite (nano-HA) and autologous platelet-rich fibrin (PRF) granules for enhanced bone formation within a critical-sized rabbit cranial defect. MSC sheets and PRF were prepared prior to in vivo experiments. The osteogenic differentiation ability of MSCs and the ultrastructure of PRF were also studied. A total of 15 New Zealand white rabbits were used in the current study and critical-size defects (CSDs) were surgically introduced in the cranium (diameter, 15 mm). The surgical defects were treated with MSC/PRF composites, MSC composites or left empty. Animals were euthanized at week 8 post-surgery. Iconography, histological and histomorphometric analysis were performed to assess de novo bone formation. The percentage of new bone in the MSC/PRF group (35.7±5.1%) was significantly higher than that in the MSC (18.3±3.2%; P<0.05) and empty defect groups (4.7±1.5%; P<0.05). The results of the present study suggest that combined application of an MSC sheet with nano-HA and granular PRF enhances bone regeneration in a rabbit calvarial CSD model, and provides a novel insight into bone tissue regeneration for large bone defects.

Combined Effect of a Microporous Layer and Type I Collagen Coating on a Biphasic Calcium Phosphate Scaffold for Bone Tissue Engineering

In this study, type I collagen was coated onto unmodified and modified microporous biphasic calcium phosphate (BCP) scaffolds. Surface characterization using a scanning electron microscope (SEM) and a surface goniometer confirmed the modification of the BCP coating. The quantity of the collagen coating was investigated using Sirius Red staining, and quantitative assessment of the collagen coating showed no significant differences between the two groups. MG63 cells were used to evaluate cell proliferation and ALP activity on the modified BCP scaffolds. The modified microporous surfaces showed low contact angles and large surface areas, which enhanced cell spreading and proliferation. Coating of the BCP scaffolds with type I collagen led to enhanced cell-material interactions and improved MG63 functions, such as spreading, proliferation, and differentiation. The micropore/collagen-coated scaffold showed the highest rate of cell response. These results indicate that a combination of micropores and collagen enhances cellular function on bioengineered bone allograft tissue.

Bioactive cell-derived matrices combined with polymer mesh scaffold for osteogenesis and bone healing

Successful bone tissue engineering generally requires an osteoconductive scaffold that consists of extracellular matrix (ECM) to mimic the natural environment. In this study, we developed a PLGA/PLA-based mesh scaffold coated with cell-derived extracellular matrix (CDM) for the delivery of bone morphogenic protein (BMP-2), and assessed the capacity of this system to provide an osteogenic microenvironment. Decellularized ECM from human lung fibroblasts (hFDM) was coated onto the surface of the polymer mesh scaffolds, upon which heparin was then conjugated onto hFDM via EDC chemistry. BMP-2 was subsequently immobilized onto the mesh scaffolds via heparin, and released at a controlled rate. Human placenta-derived mesenchymal stem cells (hPMSCs) were cultured in such scaffolds and subjected to osteogenic differentiation for 28 days in vitro. The results showed that alkaline phosphatase (ALP) activity, mineralization, and osteogenic marker expression were significantly improved with hPMSCs cultured in the hFDM-coated mesh scaffolds compared to the control and fibronectin-coated ones. In addition, a mouse ectopic and rat calvarial bone defect model was used to examine the feasibility of current platform to induce osteogenesis as well as bone regeneration. All hFDM-coated mesh groups exhibited a significant increase of newly formed bone and in particular, hFDM-coated mesh scaffold loaded with a high dose of BMP-2 exhibited a nearly complete bone defect healing as confirmed via micro-CT and histological observation. This work proposes a great potency of using hFDM (biophysical) coupled with BMP-2 (biochemical) as a promising osteogenic microenvironment for bone tissue engineering applications.

A facile in vitro model to study rapid mineralization in bone tissues

Background

Mineralization in bone tissue involves stepwise cell-cell and cell-ECM interaction. Regulation of osteoblast culture microenvironments can tailor osteoblast proliferation and mineralization rate, and the quality and/or quantity of the final calcified tissue. An in vitro model to investigate the influencing factors is highly required.

Methods

We developed a facile in vitro model in which an osteoblast cell line and aggregate culture (through the modification of culture well surfaces) were used to mimic intramembranous bone mineralization. The effect of culture environments including culture duration (up to 72 hours for rapid mineralization study) and aggregates size (monolayer culture as control) on mineralization rate and mineral quantity/quality were examined by osteogenic gene expression (PCR) and mineral markers (histological staining, SEM-EDX and micro-CT).

Results

Two size aggregates (on average, large aggregates were 745 μm and small 79 μm) were obtained by the facile technique with high yield. Cells in aggregate culture generated visible and quantifiable mineralized matrix within 24 hours, whereas cells in monolayer failed to do so by 72 hours. The gene expression of important ECM molecules for bone formation including collagen type I, alkaline phosphatase, osteopontin and osteocalcin, varied temporally, differed between monolayer and aggregate cultures, and depended on aggregate size. Monolayer specimens stayed in a proliferation phase for the first 24 hours, and remained in matrix synthesis up to 72 hours; whereas the small aggregates were in the maturation phase for the first 24 and 48 hour cultures and then jumped to a mineralization phase at 72 hours. Large aggregates were in a mineralization phase at all these three time points and produced 36% larger bone nodules with a higher calcium content than those in the small aggregates after just 72 hours in culture.

Conclusions

This study confirms that aggregate culture is sufficient to induce rapid mineralization and that aggregate size determines the mineralization rate. Mineral content depended on aggregate size and culture duration. Thus, our culture system may provide a good model to study regulation factors at different development phases of the osteoblastic lineage.

Electronic supplementary material

The online version of this article (doi:10.1186/1475-925X-13-136) contains supplementary material, which is available to authorized users.

Stem cell therapy for craniofacial bone regeneration: a randomized, controlled feasibility trial

Stem cell therapy offers potential in the regeneration of craniofacial bone defects; however, it has not been studied clinically. Tissue repair cells (TRCs) isolated from bone marrow represent a mixed stem and progenitor population enriched in CD90- and CD14-positive cells. In this phase I/II, randomized, controlled feasibility trial, we investigated TRC cell therapy to reconstruct localized craniofacial bone defects. Twenty-four patients requiring localized reconstruction of jawbone defects participated in this longitudinal trial. For regenerative therapy, patients were randomized to receive either guided bone regeneration (GBR) or TRC transplantation. At 6 or 12 weeks following treatment, clinical and radiographic assessments of bone repair were performed. Bone biopsies were harvested and underwent quantitative micro-computed tomographic (μCT) and bone histomorphometric analyses. Oral implants were installed, subsequently restored, and functionally loaded with tooth restorations. Reconstructed sites were assessed for 1 year following therapy. No study-related, serious adverse events were reported. Following therapy, clinical, radiographic, tomographic, and histological measures demonstrated that TRC therapy accelerated alveolar bone regeneration compared to GBR therapy. Additionally, TRC treatment significantly reduced the need for secondary bone grafting at the time of oral implant placement with a five fold decrease in implant bony dehiscence exposure (residual bone defects) as compared to GBR-treated sites(p < 0.01). Transplantation of TRCs for treatment of alveolar bone defects appears safe and accelerates bone regeneration, enabling jawbone reconstruction with oral implants. The results from this trial support expanded studies of TRC therapy in the treatment of craniofacial deformities (ClinicalTrials.gov number CT00755911).

Integration of a calcined bovine bone and BMSC-sheet 3D scaffold and the promotion of bone regeneration in large defects

Reconstruction of large area bone defect with mechanical integrity to the skeleton is important for patient's rehabilitation. However with the limitation of scaffold material and suitable seed cell sources, the best treating strategy remains to be identified though various tissue engineering methods were reported. In this study, we investigated the feasibility of applying calcined bovine bone (CBB) which was coated by allograft bone marrow mesenchymal stem cells (BMSC)-sheet as a 3D scaffold material in bone repairing tissue engineering. The new scaffold material was implanted into osteoporosis rat cranial bone defects and repairing critical size bone defects (8 mm diameter). Data showed that CBB-BMSC-sheet combination had a stronger potential in osteogenic differentiation and mineralized formation both in vitro and in vivo than CBB-BMSC combination. In in vitro study BMSC-sheet had a more feasible characteristic upon bone repairing including richer ECM, larger mineralized area and stronger ALP activity in addition with a significant higher mRNA expression of osteogenic maker such as BMP-2, b-FGF, Col 1a1, OSX and Runx-2 than the control group. In in vivo study 3D reconstruction of micro CT, HE staining and bone strength results showed that newly formed bone in CBB-BMSC-sheet group was significant higher than that in CBB-BMSC group at 4, 8 and 12 weeks after transplantation in the aspect of area and volume. What was more, results indicated that allograft BMSC-sheet had survivaled in the scaffold material and participated in the newly formed bone which had the same thickness with surrounding autologous bone tissues after transplantation. Results of our study demonstrated that CBB-BMSC-sheet combination was a promising strategy in healing of large area bone defect in osteoporosis.

A novel cyclic RGD-containing peptide polymer improves serum-free adhesion of adipose tissue-derived mesenchymal stem cells to bone implant surfaces

Seeding of bone implants with mesenchymal stem cells (MSCs) may promote osseointegration and bone regeneration. However, implant material surfaces, such as titanium or bovine bone mineral, fail to support rapid and efficient attachment of MSCs, especially under serum-free conditions that may be desirable when human applications or tightly controlled experiments are envisioned. Here we demonstrate that a branched poly[Lys(Ser(i)-DL-Ala(m))] polymer functionalized with cyclic arginyl-glycyl-aspartate, when immobilized by simple adsorption to tissue culture plastic, surgical titanium alloy (Ti6Al4V), or Bio-Oss(®) bovine bone substitute, significantly accelerates serum-free adhesion and enhances seeding efficiency of human adipose tissue-derived MSCs. Moreover, when exposed to serum-containing osteogenic medium, MSCs survived and differentiated on the peptide-coated scaffolds. In summary, the presented novel polypeptide conjugate can be conveniently used for coating various surfaces, and may find applications whenever quick and efficient seeding of MSCs is required to various scaffolds in the absence of serum.

In vitro osteoblast response to ferritic stainless steel fiber networks for magneto-active layers on implants

The use of a porous coating on prosthetic components to encourage bone ingrowth is an important way of improving uncemented implant fixation. Enhanced fixation may be achieved by the use of porous magneto-active layers on the surface of prosthetic implants, which would deform elastically on application of a magnetic field, generating internal stresses within the in-growing bone. This approach requires a ferromagnetic material able to support osteoblast attachment, proliferation, differentiation, and mineralization. In this study, the human osteoblast responses to ferromagnetic 444 stainless steel networks were considered alongside those to nonmagnetic 316L (medical grade) stainless steel networks. While both networks had similar porosities, 444 networks were made from coarser fibers, resulting in larger inter-fiber spaces. The networks were analyzed for cell morphology, distribution, proliferation, and differentiation, extracellular matrix production and the formation of mineralized nodules. Cell culture was performed in both the presence of osteogenic supplements, to encourage cell differentiation, and in their absence. It was found that fiber size affected osteoblast morphology, cytoskeleton organization and proliferation at the early stages of culture. The larger inter-fiber spaces in the 444 networks resulted in better spatial distribution of the extracellular matrix. The addition of osteogenic supplements enhanced cell differentiation and reduced cell proliferation thereby preventing the differences in proliferation observed in the absence of osteogenic supplements. The results demonstrated that 444 networks elicited favorable responses from human osteoblasts, and thus show potential for use as magnetically active porous coatings for advanced bone implant applications.

3D tissue-engineered construct analysis via conventional high-resolution microcomputed tomography without X-ray contrast

As the field of tissue engineering develops, researchers are faced with a large number of degrees of freedom regarding the choice of material, architecture, seeding, and culturing. To evaluate the effectiveness of a tissue-engineered strategy, histology is typically done by physically slicing and staining a construct (crude, time-consuming, and unreliable). However, due to recent advances in high-resolution biomedical imaging, microcomputed tomography (μCT) has arisen as a quick and effective way to evaluate samples, while preserving their structure in the original state. However, a major barrier for using μCT to do histology has been its inability to differentiate between materials with similar X-ray attenuation. Various contrasting strategies (hardware and chemical staining agents) have been proposed to address this problem, but at a cost of additional complexity and limited access. Instead, here we suggest a strategy for how virtual 3D histology in silico can be conducted using conventional μCT, and we provide an illustrative example from bone tissue engineering. The key to our methodology is an implementation of scaffold surface architecture that is ordered in relation to cells and tissue, in concert with straightforward image-processing techniques, to minimize the reliance on contrasting for material segmentation. In the case study reported, μCT was used to image and segment porous poly(lactic acid) nonwoven fiber mesh scaffolds that were seeded dynamically with mesenchymal stem cells and cultured to produce soft tissue and mineralized tissue in a flow perfusion bioreactor using an osteogenic medium. The methodology presented herein paves a new way for tissue engineers to identify and distinguish components of cell/tissue/scaffold constructs to easily and effectively evaluate the tissue-engineering strategies that generate them.

Using polymeric materials to control stem cell behavior for tissue regeneration

Patients with organ failure often suffer from increased morbidity and decreased quality of life. Current strategies of treating organ failure have limitations, including shortage of donor organs, low efficiency of grafts, and immunological problems. Tissue engineering emerged about two decades ago as a strategy to restore organ function with a living, functional engineered substitute. However, the ability to engineer a functional organ is limited by a limited understanding of the interactions between materials and cells that are required to yield functional tissue equivalents. Polymeric materials are one of the most promising classes of materials for use in tissue engineering, due to their biodegradability, flexibility in processing and property design, and the potential to use polymer properties to control cell function. Stem cells offer potential in tissue engineering because of their unique capacity to self-renew and differentiate into neurogenic, osteogenic, chondrogenic, and myogenic lineages under appropriate stimuli from extracellular components. This review examines recent advances in stem cell-polymer interactions for tissue regeneration, specifically highlighting control of polymer properties to direct adhesion, proliferation, and differentiation of stem cells, and how biomaterials can be designed to provide some of the stimuli to cells that the natural extracellular matrix does.

General principles for the regeneration of bone and cartilage

For the regeneration of bone and cartilage, mesenchymal stem cells are currently used invitro and in-vivo. For bone, the existence of viable cells, scaffolds, mechanical environment, growth factors and vascularization are of paramount importance. Mesenchymal stem cells can be harvested from the bone marrow using minimally invasive techniques. Centrifugation can increase the number of transplanted cells per volume. The use of cell therapy is under current clinical investigation and the benefit from these systems has to be proven in level I studies. For cartilage, current techniques recruiting stem cells from the subchondral bone have been demonstrated to be nearly as effective as autologous chondrocyte transplantation, requiring less invasive surgery. The efficacy of mesenchymal stem cell concentrates remains to be proven. There is high potential for tissue engineered joint surfaces to become an option for joint surface defects and degeneration.

Review paper: Critical Issues in Tissue Engineering: Biomaterials, Cell Sources, Angiogenesis, and Drug Delivery Systems

Tissue engineering is a newly emerging biomedical technology, which aids and increases the repair and regeneration of deficient and injured tissues. It employs the principles from the fields of materials science, cell biology, transplantation, and engineering in an effort to treat or replace damaged tissues. Tissue engineering and development of complex tissues or organs, such as heart, muscle, kidney, liver, and lung, are still a distant milestone in twenty-first century. Generally, there are four main challenges in tissue engineering which need optimization. These include biomaterials, cell sources, vascularization of engineered tissues, and design of drug delivery systems. Biomaterials and cell sources should be specific for the engineering of each tissue or organ. On the other hand, angiogenesis is required not only for the treatment of a variety of ischemic conditions, but it is also a critical component of virtually all tissue-engineering strategies. Therefore, controlling the dose, location, and duration of releasing angiogenic factors via polymeric delivery systems, in order to ultimately better mimic the stem cell niche through scaffolds, will dictate the utility of a variety of biomaterials in tissue regeneration. This review focuses on the use of polymeric vehicles that are made of synthetic and/or natural biomaterials as scaffolds for three-dimensional cell cultures and for locally delivering the inductive growth factors in various formats to provide a method of controlled, localized delivery for the desired time frame and for vascularized tissue-engineering therapies.

Scaffolds based bone tissue engineering: the role of chitosan

As life expectancy increases, malfunction or loss of tissue caused by injury or disease leads to reduced quality of life in many patients at significant socioeconomic cost. Even though major progress has been made in the field of bone tissue engineering, present therapies, such as bone grafts, still have limitations. Current research on biodegradable polymers is emerging, combining these structures with osteogenic cells, as an alternative to autologous bone grafts. Different types of biodegradable materials have been proposed for the preparation of three-dimensional porous scaffolds for bone tissue engineering. Among them, natural polymers are one of the most attractive options, mainly due to their similarities with extracellular matrix, chemical versatility, good biological performance, and inherent cellular interactions. In this review, special attention is given to chitosan as a biomaterial for bone tissue engineering applications. An extensive literature survey was performed on the preparation of chitosan scaffolds and their in vitro biological performance as well as their potential to facilitate in vivo bone regeneration. The present review also aims to offer the reader a general overview of all components needed to engineer new bone tissue. It gives a brief background on bone biology, followed by an explanation of all components in bone tissue engineering, as well as describing different tissue engineering strategies. Moreover, also discussed are the typical models used to evaluate in vitro functionality of a tissue-engineered construct and in vivo models to assess the potential to regenerate bone tissue are discussed.

A modified porous titanium sheet prepared by plasma-activated sintering for biomedical applications

This study aimed to develop a contamination-free porous titanium scaffold by a plasma-activated sintering within an originally developed TiN-coated graphite mold. The surface of porous titanium sheet with or without a coated graphite mold was characterized. The cell adhesion property of porous titanium sheet was also evaluated in this study. The peak of TiC was detected on the titanium sheet processed with the graphite mold without a TiN coating. Since the titanium fiber elements were directly in contact with the carbon graphite mold during processing, surface contamination was unavoidable event in this condition. The TiC peak was not detectable on the titanium sheet processed within the TiN-coated carbon graphite mold. This modified plasma-activated sintering with the TiN-coated graphite mold would be useful to fabricate a contamination-free titanium sheet. The number of adherent cells on the modified titanium sheet was greater than that of the bare titanium plate. Stress fiber formation and the extension of the cells were observed on the titanium sheets. This modified titanium sheet is expected to be a new tissue engineering material in orthopedic bone repair.

Relationships between degradability of silk scaffolds and osteogenesis

Bone repairs represent a major focus in orthopedic medicine with biomaterials as a critical aspect of the regenerative process. However, only a limited set of biomaterials are utilized today and few studies relate biomaterial scaffold design to degradation rate and new bone formation. Matching biomaterial remodeling rate towards new bone formation is important in terms of the overall rate and quality of bone regeneration outcomes. We report on the osteogenesis and metabolism of human bone marrow derived mesenchymal stem cells (hMSCs) in 3D silk scaffolds. The scaffolds were prepared with two different degradation rates in order to study relationships between matrix degradation, cell metabolism and bone tissue formation in vitro. SEM, histology, chemical assays, real-time PCR and metabolic analyses were assessed to investigate these relationships. More extensively mineralized ECM formed in the scaffolds designed to degrade more rapidly, based on SEM, von Kossa and type I collagen staining and calcium content. Measures of osteogenic ECM were significantly higher in the more rapidly degrading scaffolds than in the more slowly degrading scaffolds over 56 days of study in vitro. Metabolic analysis, including glucose and lactate levels, confirmed the degradation rate differences with the two types of scaffolds, with the more rapidly degrading scaffolds supporting higher levels of glucose consumption and lactate synthesis by the hMSCs upon osteogenesis, in comparison to the more slowly degrading scaffolds. The results demonstrate that scaffold degradation rates directly impact the metabolism of hMSCs, and in turn the rate of osteogenesis. An understanding of the interplay between cellular metabolism and scaffold degradability should aid in the more rational design of scaffolds for bone regeneration needs both in vitro and in vivo.

Ex vivo culturing of stromal cells with dexamethasone-loaded carboxymethylchitosan/poly(amidoamine) dendrimer nanoparticles promotes ectopic bone formation

Recently, our group has proposed a combinatorial strategy in tissue engineering principles employing carboxymethylchitosan/poly(amidoamine) dendrimer nanoparticles (CMCht/PAMAM) towards the intracellular release and regimented supply of dexamethasone (Dex) aimed at controlling stem cell osteogenic differentiation in the absence of typical osteogenic inducers, in vivo. In this work, we have investigated if the Dex-loaded CMCht/PAMAM dendrimer nanoparticles could play a crucial role in the regulation of osteogenesis, in vivo. Macroporous hydroxyapatite (HA) scaffolds were seeded with rat bone marrow stromal cells (RBMSCs), whose cells were expanded in MEM medium supplemented with 0.01 mg ml(-1) Dex-loaded CMCht/PAMAM dendrimer nanoparticles and implanted subcutaneously on the back of rats for 2 and 4 weeks. HA porous ceramics without RBMSCs and RBMSCs/HA scaffold constructs seeded with cells expanded in the presence and absence of 10(-8) M Dex were used as controls. The effect of initial cell number seeded in the HA scaffolds on the bone-forming ability of the constructs was also investigated. Qualitative and quantitative new bone formation was evaluated in a non-destructive manner using micro-computed tomography analyses of the explants. Haematoxylin and Eosin stained implant sections were also used for the histomorphometrical analysis. Toluidine blue staining was carried out to investigate the synthesis of proteoglycan extracellular matrix. In addition, alkaline phosphatase and osteocalcin levels in the explants were also quantified, since these markers denote osteogenic differentiation. At 4 weeks post-implantation results have shown that the novel Dex-loaded carboxymethylchitosan/poly(amidoamine) dendrimer nanoparticles may be beneficial as an intracellular nanocarrier, supplying Dex in a regimented manner and promoting superior ectopic de novo bone formation.

Evaluation of the osteogenic potential and vascularization of 3D poly(3)hydroxybutyrate scaffolds subcutaneously implanted in nude rats

The aim of this study was to evaluate the osteogenic potential and the vascularization of embroidered, tissue engineered, and cell-seeded 3D poly(3)hydroxybutyrate (PHB) scaffolds in nude rats. Collagen I (coll I)- and collagen I/chondroitin sulfate (coll I/CS)-coated PHB scaffolds were seeded with human mesenchymal stem cells (hMSCs). Proliferation and differentiation were characterized by different biochemical assays in vitro. For animal experiments, the cells were cultivated on coll I- or coll I/CS-coated scaffolds and either expanded or osteogenically differentiated. Scaffolds were piled up to create a 3D scaffold pad and implanted subcutaneously into nude rats. In vitro hMSC showed proliferation and differentiation on PHB scaffolds. Alkaline phosphatase (ALP) and calcium increased in the differentiation medium and in the presence of coll I/CS. In vivo blood vessels were found in the scaffold-stack. Histological/immunohistological analyses of explanted scaffolds showed osteogenic markers such as osteopontin, osteonectin, and coll I around the PHB fibers. Coll I/CS-coated scaffolds with expanded hMSC showed higher values of ALP and calcium than the other combinations. Embroidered PHB scaffolds, coated with extracellular matrix components, provided an adequate environment and, therefore, a template for hMSC which could be differentiated in osteogenic direction.

Detection of the osteogenic differentiation of mesenchymal stem cells in 2D and 3D cultures by electrochemical impedance spectroscopy

Human mesenchymal stem cells are promising candidates for cell-based therapies since they have the capacity to differentiate into a variety of cell types. However, the acceptance of hMSCs for clinical applications as well as in vitro tissue models will depend on strategies for standard characterisations. Impedance spectroscopy is a proven and powerful tool for non-invasive monitoring of cellular processes. The aim of this study was to prove the hypothesis, that the process of osteogenic differentiation can be monitored non-invasively and time-continuously by using impedance spectroscopy. This hypothesis was examined for 2D cell layers of hMSCs by continuous impedance spectroscopy employing a planar electrode-based chip and for 3D aggregates of hMSCs after 21 and 25 days of osteogenic treatment by using a capillary measurement system. The impedance spectra of osteogenic treated hMSCs reported a significant increase of the magnitude of impedance compared to controls cultivated in normal growth medium. The osteogenic status of the cells was determined by alkaline phosphatase expression and von Kossa staining. In respect to that finding it is concluded that impedance spectroscopy is an appropriate method for non-invasive characterisation of osteogenic differentiation of hMSCs, which is relevant for quality control of cell-based implants and cell-based test systems for drug development.

Effects of nanotopography on stem cell phenotypes

Stem cells are unspecialized cells that can self renew indefinitely and differentiate into several somatic cells given the correct environmental cues. In the stem cell niche, stem cell-extracellular matrix (ECM) interactions are crucial for different cellular functions, such as adhesion, proliferation, and differentiation. Recently, in addition to chemical surface modifications, the importance of nanometric scale surface topography and roughness of biomaterials has increasingly becoming recognized as a crucial factor for cell survival and host tissue acceptance in synthetic ECMs. This review describes the influence of nanotopography on stem cell phenotypes.

Time-dependent degradation of titanium osteoconductivity: an implication of biological aging of implant materials

The shelf life of implantable materials has rarely been addressed. We determined whether osteoconductivity of titanium is stable over time. Rat bone marrow-derived osteoblasts were cultured on new titanium disks (immediately after acid-etching), 3-day-old (stored after acid-etching for 3 days in dark ambient conditions), 2-week-old, and 4-week-old disks. Protein adsorption capacity, and osteoblast migration, attachment, spread, proliferation and mineralization decreased substantially on old titanium surfaces in an age-dependent manner. When the 4-week-old implants were placed into rat femurs, the biomechanical strength of bone-titanium integration was less than half that for newly processed implants at the early healing stage. More than 90% of the new implant surface was covered by newly generated bone compared to 58% for 4-week-old implants. This time-dependent biological degradation was also found for machined and sandblasted titanium surfaces and was associated with progressive accumulation of hydrocarbon on titanium surfaces. The new surface could attract osteoblasts even under a protein-free condition, but its high bioactivity was abrogated by masking the surface with anions. These results uncover an aging-like time-dependent biological degradation of titanium surfaces from bioactive to bioinert. We also suggest possible underlying mechanisms for this biological degradation that provide new insights into how we could inadvertently lose, and conversely, maximize the osteoconductivity of titanium-based implant materials.

Adhesion, proliferation, and osteogenic differentiation of a mouse mesenchymal stem cell line (BMC9) seeded on novel melt-based chitosan/polyester 3D porous scaffolds

The aim of the present work was to study the biological behavior of a mouse mesenchymal stem cell line when seeded and cultured under osteogenic conditions onto novel processed melt-based chitosan scaffolds. Scaffolds were produced by compression molding, followed by salt leaching. Scanning electron microscopy (SEM) observations and microCT analysis showed the pore sizes ranging between 250 and 500 microm and the interconnectivity of the porous structure. The chitosan-poly(butylenes succinate) scaffolds presented high mechanical properties, similar to the ones of trabecular bone (E1% approximately 75 MPa). Cytotoxicity assays were carried out using standard tests (accordingly to ISO/EN 10993 part 5 guidelines), namely, MTS test with a 24 h extraction period, revealing that L929 cells had similar metabolic activities to that obtained for the negative control. Cell culture studies were conducted using a mouse mesenchymal stem cell line (BMC9). Cells were seeded onto the scaffold and allowed to proliferate for 3 weeks under osteogenic conditions. SEM observations demonstrated that cells were able to proliferate and massively colonize the scaffolds structure. The cell viability assay MTS demonstrated that BMC9 cells were viable after 3 weeks of culture. The cells clearly evidenced a positive differentiation toward the osteogenic lineage, as confirmed by the high ALP activity levels. Moreover, energy dispersive spectroscopy (EDS) analysis revealed the presence of Ca and P in the elaborated extracellular matrix (ECM). These combined results indicate that the novel melt-based chitosan/polyester scaffolds support the adhesion, proliferation, and osteogenic differentiation of the mouse MSCs and shows adequate physicochemical and biological properties for being used as scaffolds in bone tissue engineering-related strategies.

Electromagnetic enhancement of a culture of human SAOS-2 osteoblasts seeded onto titanium fiber-mesh scaffolds

The surface properties of a biomaterial are fundamental to determine the response of the host tissue. In the present study, we have followed a particular biomimetic strategy where electromagnetically stimulated SAOS-2 human osteoblasts proliferated and built a calcified extracellular matrix on a titanium fiber-mesh surface. In comparison with control conditions, the electromagnetic stimulation (magnetic field intensity, 2 mT; frequency, 75 Hz) caused higher cell proliferation and increased surface coating with type-I collagen, decorin, and osteopontin (9.8-fold, 11.3-fold, and 9.5-fold, respectively). Reverse transcriptase-polymerase analysis revealed the electromagnetically upregulated transcription specific for the foregoing matrix proteins and for the growth factor TGF-beta1. The immunofluorescence of type-I collagen, decorin, and osteopontin showed their colocalization in the cell-rich areas. The use of an electromagnetic bioreactor aimed at obtaining the surface modification of the biocompatible metallic scaffold in terms of cell colonization and coating with calcified extracellular matrix. The superficially modified biomaterial could be used, in clinical applications, as an implant for bone repair.

2007 AIChE Alpha Chi Sigma Award: From Material to Tissue: Biomaterial Development, Scaffold Fabrication, and Tissue Engineering

The need for techniques to facilitate the regeneration of failing or destroyed tissues remains great with the aging of the worldwide population and the continued incidence of trauma and diseases such as cancer. A 16-year history in biomaterial scaffold development and tissue engineering is examined, beginning with the synthesis of novel materials and fabrication of 3D porous scaffolds. Exploring cell-scaffold interactions and subsequently cellular delivery using biomaterial carriers, we have developed a variety of techniques for bone and cartilage engineering. In addition to delivering cells, we have utilized growth factors, DNA, and peptides to improve the in vitro and in vivo regeneration of tissues. This review covers important developments and discoveries within our laboratory, and the increasing breadth in the scope of our work within the expanding field of tissue engineering is presented.

Biomaterials for stem cell differentiation

The promise of cellular therapy lies in the repair of damaged organs and tissues in vivo as well as generating tissue constructs in vitro for subsequent transplantation. Unfortunately, the lack of available donor cell sources limits its ultimate clinical applicability. Stem cells are a natural choice for cell therapy due to their pluripotent nature and self-renewal capacity. Creating reserves of undifferentiated stem cells and subsequently driving their differentiation to a lineage of choice in an efficient and scalable manner is critical for the ultimate clinical success of cellular therapeutics. In recent years, a variety of biomaterials have been incorporated in stem cell cultures, primarily to provide a conducive microenvironment for their growth and differentiation and to ultimately mimic the stem cell niche. In this review, we examine applications of natural and synthetic materials, their modifications as well as various culture conditions for maintenance and lineage-specific differentiation of embryonic and adult stem cells.

Inhibition of osteogenic differentiation of human mesenchymal stem cells

Mesenchymal stem cells (hMSCs) have been shown to differentiate into osteoblasts that, in turn, are capable of forming tissues analogous to bone. The present study was designed to investigate the inhibition of osteogenesis by hMSCs. Bone marrow-derived hMSCs were treated with transforming growth factor beta-3 (TGFbeta3) at various doses during or after their differentiation into osteogenic cells. TGFbeta3 was encapsulated in poly(DL-lactic-co-glycolic acid) (PLGA) microspheres and released via controlled delivery in the osteogenic culture of hMSCs and hMSC-derived osteoblasts for up to 28 days. Controlled release of TGFbeta3 inhibited the osteogenic differentiation of hMSCs, as evidenced by significantly reduced alkaline phosphatase activity and staining, as well as decreased mineral deposition. After hMSCs had been differentiated into osteoblasts, controlled release of TGFbeta3 further inhibited not only alkaline phosphatase and mineral deposition but also osteocalcin expression. These findings demonstrate the potential for sustained modulation of the behavior of stem cells and/or stem cell-derived lineage-specific cells via controlled release of growth factor(s). The attenuation of osteogenic differentiation of MSCs may facilitate understanding not only the regulation and patterning of osteogenesis in development but also several pathological models such as osteopetrosis, craniosynostosis, and heart valve calcification.

Improved Mesenchymal Stem Cell Seeding on RGD-Modified Poly(L-lactic acid) Scaffolds using Flow Perfusion

Arg-Gly-Asp (RGD) has been widely utilized to increase cell adhesion to three-dimensional scaffolds for tissue engineering. However, cell seeding on these scaffolds has only been carried out statically, which yields low cell seeding efficiencies. We have characterized, for the first time, the seeding of rat mesenchymal stem cells on RGD-modified poly(L-lactic acid) (PLLA) foams using oscillatory flow perfusion. The incorporation of RGD on the PLLA foams improves scaffold cellularity in a dose-dependent manner under oscillatory flow perfusion seeding. When compared to static seeding, oscillatory flow perfusion is the most efficient seeding technique. Cell detachment studies show that cell adhesion is dependent on the applied flow rate, and that cell attachment is strengthened at higher levels of RGD modification.

Titania and Titania-Silica Coatings for Titanium: Comparison of Ectopic Bone Formation within Cell-Seeded Scaffolds

The aim of this study was to compare titania (TiO(2))-coated, titania-silica (TiSi)-coated, and uncoated (cpTi) titanium fiber meshes as scaffolds for bone engineering. The scaffolds were loaded with bone marrow stromal cells and implanted subcutaneously in rats. Ectopic bone formation after 1, 4, and 12 weeks of implantation was evaluated using histology and histomorphometry. After 1 week of implantation, multiple patches of unorganized mineralizing tissue were seen in all implants. The amount of this bone-like tissue clearly increased from 1 to 4 weeks. Bone apposition occurred in direct contact with coated meshes, while a thin layer of unmineralized fibrous tissue was often observed surrounding cpTi mesh fibers. After 12 weeks, the structure of bone, with bone marrow-like tissue, was further matured and mesh fibers were embedded in lamellar bone. No statistical differences in the amount of mineralized bone were observed between scaffold types at any point of time. Only TiSi scaffolds showed further increase in bone area from 4 to 12 weeks (p < 0.01). A notable difference was that the sol-gel coatings resulted in enhanced initial bone contact and distribution of bone tissue, whereas uncoated implants showed bone formation mainly in the center of the scaffolds. In conclusion, TiO(2)-based sol-gel coatings may be used in tissue engineering to gain more uniform distribution of bone throughout titanium fiber mesh scaffolds.

In vitro Mineralization by Mesenchymal Stem Cells Cultured on Titanium Scaffolds

Titanium has been utilized in the field of orthopaedic and dental reconstructive surgery, but mineralization through osteogenic differentiation of osteogenic cells on titanium surfaces has not been fully investigated. Here we cultured rat mesenchymal stem cells (MSCs) on the surfaces of titanium dishes in osteogenic media containing calcein which is a calcium-binding fluorescence dye. On titanium dishes, MSCs showed high viability to adhere to the surfaces and excellent proliferation. At day 14 of culture, MSCs differentiated into osteoblasts to form mineralized matrices on titanium dishes as well as tissue culture polystyrene (TCPS) dishes which are widely recognized as optimal culture substrates. Calcein was incorporated into the bone minerals fabricated by MSCs cultured on both substrates to show green emission under fluorescence microscopy. The fluorescence intensity was quantified with an image analyser during culture periods. These results indicate that the surfaces of titanium showed a high adhesion/proliferation potential to MSCs and that the titanium effectively supported the osteogenic differentiation of MSCs comparable to TCPS dishes. Therefore, the titanium is an effective scaffold that is applicable in bone reconstruction surgery.