Autoactivation of blood factor XII at hydrophilic and hydrophobic surfaces

Development of a super-hydrophilic anaerobic tube for the optimization of platelet-rich fibrin

Horizontal platelet-rich fibrin (H-PRF) contains a variety of bioactive growth factors and cytokines that play a key role in the process of tissue healing and regeneration. The blood collection tubes used to produce Solid-PRF (plasmatrix (PM) tubes) have previously been shown to have a great impact on the morphology, strength and composition of the final H-PRF clot. Therefore, modification to PM tubes is an important step toward the future optimization of PRF. To this end, we innovatively modified the inner wall surface of the PM tubes with plasma and adjusted the gas environment inside the PM tubes to prepare super-hydrophilic anaerobic plasmatrix tubes (SHAP tubes). It was made anaerobic for the preparation of H-PRF with the aim of improving mechanical strength and bioactivity. The findings demonstrated that an anaerobic environment stimulated platelet activation within the PRF tubes. After compression, the prepared H-PRF membrane formed a fibrous cross-linked network with high fracture strength, ideal degradation characteristics, in addition to a significant increase in size. Thereafter, the H-PRF membranes prepared by the SHAP tubes significantly promoted collagen synthesis of gingival fibroblast and the mineralization of osteoblasts while maintaining excellent biocompatibility, and advantageous antibacterial properties. In conclusion, the newly modified PRF tubes had better platelet activation properties leading to better mechanical strength, a longer degradation period, and better regenerative properties in oral cell types including gingival fibroblast and alveolar osteoblasts. It also improves the success rate of H-PRF preparation in patients with coagulation dysfunction and expands the clinical application scenario.

FXII contact activation products have an inhibitory effect on αFXIIa

It is accepted that the contact activation complex of the intrinsic pathway of blood coagulation cascade produces active enzymes that lead to plasma coagulation following biomaterial contact. In this study, FXII was activated through contact with hydrophilic glass beads and hydrophobic octadecyltrichlorosilane-modified glass beads from neat buffer solutions. These FXII contact activation products generated from material interaction were found to suppress the procoagulant activity of exogenous αFXIIa, and this inhibition was dependent on surface wettability and the concentration of exogenous αFXIIa. Higher relative inhibition rates were generally observed at low concentrations of αFXIIa (1-2 μg/mL) while both hydrophobic and hydrophilic materials showed similar inhibition levels (~39%) at high concentrations of αFXIIa (20 μg/mL). The presence of prekallikrein in the activation system increased the amount of FXIIa produced during FXII contact activation, and also suppressed the apparent levels of inhibitors on hydrophilic surfaces, while having no effect on apparent levels of inhibitors on hydrophobic surface. The combination of FXII contact activation products and activator surfaces was found to dramatically increase inhibition of αFXIIa activity compared to the activation products alone, regardless of activator surface wettability and the presence of prekallikrein. This finding of inhibitors in the suite of proteins generated by contact activation provides additional knowledge into the complex series of interactions that occur when plasma comes into contact with material surfaces.

Steps Toward Recapitulating Endothelium: A Perspective on the Next Generation of Hemocompatible Coatings

Endothelium, the lining in this blood vessel, orchestrates three main critical functions such as protecting blood components, modulating of hemostasis by secreting various inhibitors, and directing clot digestion (fibrinolysis) by activating tissue plasminogen activator. No other surface can perform these tasks; thus, the contact of blood and blood-contacting medical devices inevitably leads to the activation of coagulation, often causing device failure, and thromboembolic complications. This perspective, first, discusses the biological mechanisms of activation of coagulation and highlights the efforts of advanced coatings to recapitulate one characteristic of endothelium, hereafter single functions of endothelium and noting necessity of the synergistic integration of its three main functions. Subsequently, it is emphasized that to overcome the challenges of blood compatibility an endothelium-mimicking system is needed, proposing a synergy of bottom-up synthetic biology, particularly synthetic cells, with passive- and bioactive surface coatings. Such integration holds promise for developing advanced biomaterials capable of recapitulating endothelial functions, thereby enhancing the hemocompatibility and performance of blood-contacting medical devices.

Syndecan-4 Functionalization Reduces the Thrombogenicity of Engineered Vascular Biomaterials

Blood-biomaterial compatibility is essential for tissue repair especially for endovascular biomaterials where small-diameter vessel patency and endothelium formation is crucial. To address this issue, a composite biomaterial termed PFC fabricated from poly (glycerol sebacate), silk fibroin, and collagen was used to determine if functionalization with syndecan-4 (SYN4) would reduce thrombogenesis through the action of heparan sulfate. The material termed, PFC_SYN4, has structure and composition similar to native arterial tissue and has been reported to facilitate the binding and differentiation of endothelial colony-forming cells (ECFCs). In this study, the hemocompatibility of PFC_SYN4 was evaluated and compared with non-functionalized PFC, electrospun collagen, ePTFE, and bovine pericardial patch (BPV). Ultrastructurally, platelets were less activated when cultured on PFC and PFC_SYN4 compared to collagen where extensive platelet degranulation was observed. Quantitatively, 31% and 44% fewer platelets adhered to PFC_SYN4 compared to non-functionalized PFC and collagen, respectively. Functionalization of PFC resulted in reduced levels of complement activation compared to PFC, collagen, and BPV. Whole blood clotting times indicated that PFC_SYN4 was less thrombogenic compared with PFC, collagen, and BPV. These results suggest that syndecan-4 functionalization of blood-contacting biomaterials provides a novel solution for generating a reduced thrombogenic surface.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Nanoengineered Supramolecular Adhesive Sponge for Rapid Hemostasis and Abdominal Wall Wound Healing

Multifunctional dressing biomaterials that can promote tissue adhesion, hemostasis, and soft-tissue wound healing are of great clinical significance. Here, we report a nanocomposite supramolecular sponge constructed by an air-in-water emulsion template composed of methacrylated gelatin (GelMA), Laponite nanoclay, and branched supramolecular polymer (PAMU). The sponge has an interconnected macroporous structure and exhibits tunable mechanical properties with varying Laponite concentration. The nanoengineered sponge is endowed with tissue adhesion by intermolecular hydrogen bonds and ionic interactions contributed by the supramolecular polymer and the Laponite nanoclay. The biocompatible sponge facilitates cell proliferation and blood coagulation in both in vitro and in vivo experiments. In addition, the results of the rat external abdominal wall defect model show that the sponge can promote angiogenesis, collagen deposition, and granulation tissue formation to accelerate wound repair. These findings suggest that the unique air-in-water templated sponge is a promising candidate for applications in hemostasis and wound healing.

Optimization of platelet-rich fibrin

The use of platelet-rich fibrin (PRF) has gained tremendous popularity in recent years owing to its ability to speed wound healing postsurgery. However, to date, many clinicians are unaware of methods designed to optimize the technology. This overview article will discuss the advancements and improvements made over the years aimed at maximizing cell and growth factor concentrations. First, a general understanding explaining the differences between RPM and RCF (g-force) is introduced. Then, the low-speed centrifugation concept, fixed angle versus horizontal centrifugation, and methods to maximize platelet concentrations using optimized protocols will be discussed in detail. Thereafter, the importance of chemically modified PRF tubes without the addition of chemical additives, as well as regulation of temperature to induce/delay clotting, will be thoroughly described. This article is a first of its kind summarizing all recent literature on PRF designed to optimize PRF production for clinical treatment.

Preparation and Activity of Hemostatic and Antibacterial Dressings with Greige Cotton/Zeolite Formularies Having Silver and Ascorbic Acid Finishes

The need for prehospital hemostatic dressings that exert an antibacterial effect is of interest for prolonged field care. Here, we consider a series of antibacterial and zeolite formulary treatment approaches applied to a cotton-based dressing. The design of the fabric formulations was based on the hemostatic dressing TACGauze with zeolite Y incorporated as a procoagulant with calcium and pectin to facilitate fiber adherence utilizing silver nanoparticles, and cellulose-crosslinked ascorbic acid to confer antibacterial activity. Infra-red spectra were employed to characterize the chemical modifications on the dressings. Contact angle measurements were employed to document the surface hydrophobicity of the cotton fabric which plays a role in the contact activation of the coagulation cascade. Ammonium Y zeolite-treated dressings initiated fibrin equal to the accepted standard hemorrhage control dressing and showed similar improvement with antibacterial finishes. The antibacterial activity of cotton-based technology utilizing both citrate-linked ascorbate-cellulose conjugate analogs and silver nanoparticle-embedded cotton fibers was observed against Staphylococcus aureus and Klebsiella pneumoniae at a level of 99.99 percent in the AATCC 100 assay. The hydrogen peroxide levels of the ascorbic acid-based fabrics, measured over a time period from zero up to forty-eight hours, were in line with the antibacterial activities.

Mechanisms for Reduced Fibrin Clot Formation on Liquid-Infused Surfaces

Biomedical devices are prone to blood clot formation (thrombosis), and liquid-infused surfaces (LIS) are effective in reducing the thrombotic response. However, the mechanisms that underpin this performance, and in particular the role of the lubricant, are not well understood. In this work, it is investigated whether the mechanism of LIS action is related to i) inhibition of factor XII (FXII) activation and the contact pathway; ii) reduced fibrin density of clots formed on surfaces; iii) increased mobility of proteins or cells on the surface due to the interfacial flow of the lubricant. The chosen LIS is covalently tethered, nanostructured layers of perfluorocarbons, infused with thin films of medical-grade perfluorodecalin (tethered-liquid perfluorocarbon), prepared with chemical vapor deposition previously optimized to retain lubricant under flow. Results show that in the absence of external flow, interfacial mobility is inherently higher at the liquid-blood interface, making it a key contributor to the low thrombogenicity of LIS, as FXII activity and fibrin density are equivalent at the interface. The findings of this study advance the understanding of the anti-thrombotic behavior of LIS-coated biomedical devices for future coating design. More broadly, enhanced interfacial mobility may be an important, underexplored mechanism for the anti-fouling behavior of surface coatings.

Toward modeling thrombosis and thromboembolism in laminar and turbulent flow regimes

Thrombosis and thromboembolism are deadly risk factors in blood-contacting biomedical devices, and in-silico models of thrombosis are attractive tools to understand the mechanics of these processes, though the simulation of thromboembolism remains underdeveloped. The purpose of this study is to modify an existing computational thrombosis model to allow for thromboembolism and to investigate the behavior of the modified model at a range of flow rates. The new and existing models are observed to lead to similar predictions of thrombosis in a canonical backward-facing step geometry across flow rates, and neither model predicts thrombosis in a turbulent flow. Simulations are performed by increasing flow rates in the case of a clot formed at lower flow to induce embolization. While embolization is observed, most of the clot breakdown is by shear rather than by breakup and subsequent transport of clotted material, and further work is required in the formulation and validation of embolization. This model provides a framework to further investigate thromboembolization.

Blood Coagulation on Titanium Dioxide Films with Various Crystal Structures on Titanium Implant Surfaces

Background: Titanium (Ti) is one of the most popular implant materials, and its surface titanium dioxide (TiO₂) provides good biocompatibility. The coagulation of blood on Ti implants plays a key role in wound healing and cell growth at the implant site; however, researchers have yet to fully elucidate the mechanism underlying this process on TiO₂. Methods: This study examined the means by which blood coagulation was affected by the crystal structure of TiO₂ thin films (thickness < 50 nm), including anatase, rutile, and mixed anatase/rutile. The films were characterized in terms of roughness using an atomic force microscope, thickness using an X-ray photoelectron spectrometer, and crystal structure using transmission electron microscopy. The surface energy and dielectric constant of the surface films were measured using a contact angle goniometer and the parallel plate method, respectively. Blood coagulation properties (including clotting time, factor XII contact activation, fibrinogen adsorption, fibrin attachment, and platelet adhesion) were then assessed on the various test specimens. Results: All of the TiO₂ films were similar in terms of surface roughness, thickness, and surface energy (hydrophilicity); however, the presence of rutile structures was associated with a higher dielectric constant, which induced the activation of factor XII, the formation of fibrin network, and platelet adhesion. Conclusions: This study provides detailed information related to the effects of TiO₂ crystal structures on blood coagulation properties on Ti implant surfaces.

Histomorphometry of Ossification in Functionalised Ceramics with Tripeptide Arg-Gly-Asp (RGD): An In Vivo Study

The present study investigated the osseointegration promoted by functionalised ceramics with peptide Arg-Gly-Asp (RGD) in a rabbit model in vivo. Histomorphometry of the RGD functionalised ceramic implants was conducted by a trained pathologist to quantify the amount of mature and immature ossification at the bone interface, and then compared to titanium alloy implants. The region of interest was the area surrounding the implant. The percentage of ROI covered by osteoid implant contact and mature bone implant contact were assessed. The presence of bone resorption, necrosis, and/or inflammation in the areas around the implant were quantitatively investigated. All 36 rabbits survived the experimental period of 6 and 12 weeks. All implants remained in situ. No necrosis, bone resorption, or inflammation were identified. At 12 weeks follow-up, the overall mean bone implant contact (p = 0.003) and immature osteoid contact (p = 0.03) were improved compared to the mean values evidenced at 6 weeks. At 6 weeks follow-up, the overall osteoid implant contact was greater in the RGD enhanced group compared to the titanium implant (p = 0.01). The other endpoints of interest were similar between the two implants at all follow-up points (p ≥ 0.05). Functionalised ceramics with peptide RGD promoted ossification in vivo. The overall osteoid and bone implant contact improved significantly from 6 to 12 weeks. Finally, RGD enhanced ceramic promoted faster osteoid implant contact in vivo than titanium implants. Overall, the amount of ossification at 12 weeks is comparable with the titanium implants. No necrosis, bone resorption, or inflammation were observed in any sample.

Brush-Like Interface on Surface-Attached Hydrogels Repels Proteins and Bacteria

Interfacing artificial materials with biological tissues remains a challenge. The direct contact of their surface with the biological milieu results in multiscale interactions, in which biomacromolecules adsorb and act as transducers mediating the interactions with cells and tissues. So far, only antifouling polymer brushes have been able to conceal the surface of synthetic materials. However, their complex synthesis has precluded their translation to applications. Here, we show that ultra-thin surface-attached hydrogel coatings of N-(2-hydroxypropyl) methacrylamide (HPMA) and carboxybetaine methacrylamide (CBMAA) provided the same level of protection as brushes. In spite of being readily applicable, these coatings prevented the fouling from whole blood plasma and provided a barrier to the adhesion of Gram positive and negative bacteria. The analysis of the components of the surface free energy and nanoindentation experiments revealed that the excellent antifouling properties stem from the strong surface hydrophilicity and the presence of a brush-like structure at the water interface. Moreover, these coatings could be functionalized to achieve antimicrobial activity while remaining stealth and non-cytotoxic to eukaryotic cells. Such level of performance was previously only achieved with brushes. Thus, we anticipate that this readily applicable strategy is a promising route to enhance the biocompatibility of real biomedical devices. This article is protected by copyright. All rights reserved.

Hemostatic Electrospun Nanocomposite Containing Poly(lactic acid)/Halloysite Nanotube Functionalized by Poly(amidoamine) Dendrimer for Wound Healing Application: In Vitro and In Vivo Assays

The main challenge in treating injuries is excessive bleeding whereas intervention is required if the body's hemostatic systems fail to control the bleeding. Herein, a novel nanocomposite consisting of poly(lactic acid) (PLA) and poly(amidoamine) (PAMAM) dendrimer functionalized halloysite nanotube (HNT) with a highly porous structure via electrospinning is developed. HNT is functionalized by PAMAM via divergent synthetic routes from zero to third-generation numbers. The effect of different percentages and generation numbers of PAMAM dendrimer (G1, G2, and G3) functionalized HNT on PLA is studied using physicochemical nanocomposite characteristics. These resultant nanocomposites provide a nanofibrous structure with appropriate physicochemical characteristics such as mechanical properties, surface wettability, and water permeability. The hemostatic assays indicate that nanocomposite with PAMAM G3 functionalized HNT have the quickest blood clotting time due to the abundant amino functional group. Furthermore, the nanocomposites with 10 wt% of nanoparticles significantly promote cellular behavior in vitro. The in vivo study demonstrates that PLA/PAMAM G3 functionalized HNT promotes angiogenesis, collagen deposition, and re-epithelialization in the wound sites of the rat model, as well as inhibiting inflammatory response. The findings indicate that nanofibrous structure and the presence of dendrimer functionalized HNT have a synergetic effect on the enhanced nanocomposite wound healing performance.

Biomaterial Wettability Affects Fibrin Clot Structure and Fibrinolysis

Thrombosis on blood-contacting medical devices can cause patient fatalities through device failure and unstable thrombi causing embolism. The effect of material wettability on fibrin network formation, structure, and stability is poorly understood. Under static conditions, fibrin fiber network volume and density increase in clots formed on hydrophilic compared to hydrophobic polystyrene surfaces. This correlates with reduced plasma clotting time and increased factor XIIa (FXIIa) activity. These structural differences are consistent up to 50 µm away from the material surface and are FXIIa dependent. Fibrin forms fibers immediately at the material interface on hydrophilic surfaces but are incompletely formed in the first 5 µm above hydrophobic surfaces. Additionally, fibrin clots on hydrophobic surfaces have increased susceptibility to fibrinolysis compared to clots formed on hydrophilic surfaces. Under low-flow conditions, clots are still denser on hydrophilic surfaces, but only 5 µm above the surface, showing the combined effect of the surface wettability and coagulation factor dilution with low flow. Overall, wettability affects fibrin fiber formation at material interfaces, which leads to differences in bulk fibrin clot density and susceptibility to fibrinolysis. These findings have implications for thrombus formed in stagnant or low-flow regions of medical devices and the design of nonthrombogenic materials.

Synthetic Material Abdominal Swabs Reduce Activation of Platelets and Leukocytes Compared to Cotton Materials

During surgical procedures, cotton abdominal swabs with their high absorptive capacity and malleability are used to retain organs and absorb blood or other body fluids. Such properties of the natural material cotton are advantageous for most operations, but in cardiopulmonary bypass (CPB) surgery, a high blood volume can accumulate in the thoracic cavity that is quickly retransfused via the heart-lung machine (HLM). This common practice is supposed to be safe due to the high anticoagulation. However, in vitro analyses showed that blood cells and plasma proteins were activated despite a high anticoagulation, which can propagate especially an inflammatory response in the patient. Thus, we investigated patients' blood during CPB surgery for inflammatory and coagulation-associated activation after contact to the HLM and either cotton or synthetic abdominal swabs. Contact with cotton significantly increased thrombocyte and neutrophil activation measured as β-thromboglobulin and PMN-elastase secretion, respectively, compared to synthetic abdominal swabs. Both inflammatory cytokines, interleukin (IL) 1β and IL6, were also significantly increased in the cotton over the synthetic patient group, while SDF-1α was significantly lower in the synthetic group. Our data show for the first time that cotton materials can activate platelets and leukocytes despite a high anticoagulation and that this activation is lower with synthetic materials. This additional activation due to the material on top of the activation exerted by the tissue contact that blood is exposed to during CPB surgery can propagate further reactions in patients after surgery, which poses a risk for this already vulnerable patient group.

Enzyme mimetic microgel coating for endogenous nitric oxide mediated inhibition of platelet activation

Nitric oxide (NO) continuously generated by healthy endothelium prevents platelet activation and maintains vascular homeostasis. However, when artificial surfaces, like of extracorporeal membrane oxygenator comes in contact with blood, protein adsorption and thereby platelet activation takes place, which eventually leads to thrombus formation. To overcome this, we present an antifouling microgel coating mimicking the function of enzyme glutathione peroxidase to endogenously generate NO in the blood plasma from endogenous NO-donors and maintain a physiological NO flux. Microgels are synthesized by copolymerization of highly hydrophilic N-(2-hydroxypropyl)methacrylamide (HPMA) and glycidyl methacrylate (GMA) with diselenide crosslinks. For immobilization of the microgels on hydrophobic poly(4-methylpentene) (TPX) membranes bioengineered amphiphilic anchor peptides with free thiols are used. The anchor peptide attaches to the TPX membranes by hydrophobic interactions while the free thiols are presented for crosslinking with the microgels. The hydrophilic nature of the microgel coating prevents protein adsorption while the reversible diselenide bridges make the microgels responsive to the reducing environment and lead to the formation of reactive selenols/selenolates. The generated selenols/selenolates provide an efficient and sustained NO-release from endogenous S-nitrosothiols (RSNOs) mimicking the enzymatic function of glutathione peroxidase. On exposure to the whole blood, the microgel coating inhibited platelet activation and prolonged the blood clotting time.

Mixed-charge pseudo-zwitterionic copolymer brush as broad spectrum antibiofilm coating

Zwitterionic polymers are classical antifouling polymers but they require specialized monomers that have cationic and anionic charges integrated into a single monomer. Herein, we show that pseudo-zwitterionic copolymers synthesized from a mixture of 2 monomers each having a single opposite polarity has excellent antibiofilm efficacy. We have discovered a new mixed-charge copolymer brush (#1-A) synthesized from 2 oppositely charged monomers, the anionic SPM (3-Sulfopropyl methacrylate) and the cationic AMPTMA ((3-Acrylamidopropyl) trimethylammonium chloride), that achieves broad spectrum in vitro antibiofilm effect of greater than 99% reductions against all six Gram-positive and Gram-negative bacteria tested. In the murine subcutaneous wound catheter infection models, the #1-A has good long-term anti-biofilm efficacy against MRSA and Pseudomonas aeruginosa of 3.41 and 3.19 orders respectively, outperforming previous mixed-charge copolymer coatings. We discovered a new method to choose the cationic/anionic pair combination to form the best antibiofilm copolymer brush coating by exploiting the solution polymerization kinetics disparity between the cationic and anionic monomers. We also showed that #1-A is softer and has higher hydration than the classical zwitterionic polymer. This study shows the possibility of achieving potent antibiofilm efficacy by combining readily available opposite singly charged monomers.

Immunologic reactions to bone and articular implants

BACKGROUND

In recent years the number on implantable devices that have been used in orthopedic surgeries has increased exponentially. As the number of people with orthopedic implants has grown, implant failure has become an increasingly important public health issue. While a significant percent of joint implants fails at between 15 and 20 years some authors suggest that one of the main causes is the interaction between the immune system of the host and the material of the implant METHODS: The search engines used for research comprised of PubMed, Google Scholar and Cochrane Library.

RESULTS

This review aims to summarize relevant and recent data on the immune reactions that are taking place at the juxtaposition between the implant and the patient's tissue, the time frame in which these immune reactions take place and some of the factors that can influence this reaction. The immune reactions can be divided into: hyperacute immune reactions (anaphylactic shock), acute reactions, the transition between the acute phase and the chronic phase and last but not least chronic immune reactions to such implants.

CONCLUSION

The research being done with regard to implant-related immunology strives to help in solving the problem of long-term implant failure.

Development of a Nonwoven Hemostatic Dressing Based on Unbleached Cotton: A De Novo Design Approach

Minimally processed greige (unbleached) cotton fibers demonstrate enhanced clotting relative to highly processed United States Pharmacopeia (USP) type 7 bleached cotton gauze. This effect is thought to be due to the material surface polarity. We hypothesized that a textile could be constructed, conserving the hemostasis-accelerating properties of greige cotton, while maintaining structural integrity and improving absorbance. Spun bond nonwovens of varying surface polarity were designed and prepared based on ratios of greige cotton/bleached cotton/polypropylene fibers. A thromboelastographic analysis was performed on fibrous samples in citrated blood to evaluate the rate of fibrin and clot formation. Lee White clotting times were obtained to assess the material’s clotting activity in platelet fresh blood. An electrokinetic analysis of samples was performed to analyze for material surface polarity. Hemostatic properties varied with composition ratios, fiber density, and fabric fenestration. The determinations of the surface polarity of cotton fabrics with electrokinetic analysis uncovered a range of surface polarities implicated in fabric-initiated clotting; a three-point design approach was employed with the combined use of thromboelastography, thrombin velocity index, Lee White clotting, and absorption capacity determinations applied to fabric structure versus function analysis. The resulting analysis demonstrates that greige cotton may be utilized, along with hydrophilic and hydrophobic fibers, to improve the initiation of fibrin formation and a decrease in clotting time in hemostatic dressings suitable to be commercially developed. Hydroentanglement is an efficient and effective process for imparting structural integrity to cotton-based textiles, while conserving hemostatic function.

Evaluation of the Effect of Crosslinking Method of Poly(Vinyl Alcohol) Hydrogels on Thrombogenicity

PURPOSE

Crosslinked poly(vinyl alcohol) (PVA) is a biomaterial that can be used for multiple cardiovascular applications. The success of implanted biomaterials is contingent on the properties of the material. A crucial consideration for blood-contacting devices is their potential to incite thrombus formation, which is dependent on the material surface properties. The goal of this study was to quantify the effect of different crosslinking methods of PVA hydrogels on in vitro thrombogenicity.

METHODS

PVA was manufactured using three different crosslinking methods: 30% sodium trimetaphosphate (STMP), three 24 h freeze-thaw cycles (FT), and 2% glutaraldehyde-crosslinked (GA) to produce STMP-PVA, FT-PVA and GA-PVA, respectively. Expanded polytetrafluoroethylene (ePTFE) was used as a clinical control. As markers of thrombus formation, the degree of coagulation factor (F) XII activation, fibrin formation, and platelet adhesion were measured.

RESULTS

The GA-PVA material increased FXII activation in the presence of cofactors compared to vehicle and increase platelet adhesion compared to other PVA surfaces. The STMP-PVA and FT-PVA materials had equivalent degrees of FXII activation, fibrin formation and platelet adhesion.

CONCLUSION

This work supports crosslinker dependent thrombogenicity of PVA hydrogels and advances our understanding of how the manufacturing of a PVA hydrogel affects its hemocompatibility.

Interaction of blood plasma proteins with superhemophobic titania nanotube surfaces

The need to improve blood biocompatibility of medical devices is urgent. As soon as blood encounters a biomaterial implant, proteins adsorb on its surfaces, often leading to several complications such as thrombosis and failure of the device. Therefore, controlling protein adsorption plays a major role in developing hemocompatible materials. In this study, the interaction of key blood plasma proteins with superhemophobic titania nanotube substrates and the blood clotting responses was investigated. The substrate stability was evaluated and fibrinogen adsorption and thrombin formation from plasma were assessed using ELISA. Whole blood clotting kinetics was also investigated, and Factor XII activation on the substrates was characterized by an in vitro plasma coagulation time assay. The results show that superhemophobic titania nanotubes are stable and considerably decrease surface protein adsorption/Factor XII activation as well as delay the whole blood clotting, and thus can be a promising approach for designing blood contacting medical devices.

The blood compatibility challenge. Part 2: Protein adsorption phenomena governing blood reactivity

The adsorption of proteins is the initiating event in the processes occurring when blood contacts a "foreign" surface in a medical device, leading inevitably to thrombus formation. Knowledge of protein adsorption in this context has accumulated over many years but remains fragmentary and incomplete. Moreover, the significance and relevance of the information for blood compatibility are not entirely agreed upon in the biomaterials research community. In this review, protein adsorption from blood is discussed under the headings "agreed upon" and "not agreed upon or not known" with respect to: protein layer composition, effects on coagulation and complement activation, effects on platelet adhesion and activation, protein conformational change and denaturation, prevention of nonspecific protein adsorption, and controlling/tailoring the protein layer composition. STATEMENT OF SIGNIFICANCE: This paper is part 2 of a series of 4 reviews discussing the problem of biomaterial associated thrombogenicity. The objective was to highlight features of broad agreement and provide commentary on those aspects of the problem that were subject to dispute. We hope that future investigators will update these reviews as new scholarship resolves the uncertainties of today.

A human whole-blood model to study the activation of innate immunity system triggered by nanoparticles as a demonstrator for toxicity

In this review article, we focus on activation of the soluble components of the innate immune system triggered by nonbiological compounds and stress variances in activation due to the difference in size between nanoparticles (NPs) and larger particles or bulk material of the same chemical and physical composition. We then discuss the impact of the so-called protein corona which is formed on the surface of NPs when they come in contact with blood or other body fluids. For example, NPs which bind inert proteins, proteins which are prone to activate the contact system (e.g., factor XII), which may lead to clotting and fibrin formation or the complement system (e.g., IgG or C3), which may result in inflammation and vascular damage. Furthermore, we describe a whole blood model which we have developed to monitor activation and interaction between different components of innate immunity: blood protein cascade systems, platelets, leukocytes, cytokine generation, which are induced by NPs. Finally, we describe our own studies on innate immunity system activation induced by three fundamentally different species of NPs (two types of engineered NPs and diesel NPs) as demonstrator of the utility of an initial determination of the composition of the protein corona formed on NPs exposed to ethylenediaminetetraacetic acid (EDTA) plasma and subsequent analysis in our whole blood model.

The impact of immune response on endochondral bone regeneration

Tissue engineered cartilage substitutes, which induce the process of endochondral ossification, represent a regenerative strategy for bone defect healing. Such constructs typically consist of multipotent mesenchymal stromal cells (MSCs) forming a cartilage template in vitro, which can be implanted to stimulate bone formation in vivo. The use of MSCs of allogeneic origin could potentially improve the clinical utility of the tissue engineered cartilage constructs in three ways. First, ready-to-use construct availability can speed up the treatment process. Second, MSCs derived and expanded from a single donor could be applied to treat several patients and thus the costs of the medical interventions would decrease. Finally, it would allow more control over the quality of the MSC chondrogenic differentiation. However, even though the envisaged clinical use of allogeneic cell sources for bone regeneration is advantageous, their immunogenicity poses a significant obstacle to their clinical application. The aim of this review is to increase the awareness of the role played by immune cells during endochondral ossification, and in particular during regenerative strategies when the immune response is altered by the presence of implanted biomaterials and/or cells. More specifically, we focus on how this balance between immune response and bone regeneration is affected by the implantation of a cartilaginous tissue engineered construct of allogeneic origin.

Neutrophil extracellular trap formation upon exposure of hydrophobic materials to human whole blood causes thrombogenic reactions

Neutrophil extracellular trap (NET) formation, a reaction of the innate immune system to fight pathogens, was shown to be involved in thrombus formation. In the present study blood-contacting biomaterials with graded surface characteristics were investigated as a potential cause of NET formation on medical devices. Surface properties are known to govern protein adsorption, cell adhesion and ultimately the activation of several other host defense pathways - potentially also the formation of NETs. Model materials of defined hydrophilic or hydrophobic properties (glass, and thin films of poly(ethylene-alt-maleic anhydride), self-assembled monolayers of methyl terminated alkanethiols, and Teflon AF™) were incubated either with isolated human granulocytes after pre-adsorption with plasma proteins or with human whole blood. NET formation - detected as extracellular DNA, citrullinated histones, elastase and reactive oxygen species (ROS) - was observed on hydrophobic surfaces. Furthermore, NET formation on the hydrophobic surface Teflon AF™ resulted in elevated thrombin generation in hirudin-anticoagulated whole blood, but not in heparinized whole blood. Disintegration of surface-bound NETs by DNase treatment resulted in significantly lower pro-coagulant effects. Thus, NET formation can contribute to the thrombogenicity of clinically applied hydrophobic materials, suggesting NETosis as well as NET surface anchorage as new targets of anticoagulation strategies.

Endothelial mimetic multifunctional surfaces fabricated via polydopamine mediated copper immobilization

Nitric oxide (NO), which is continuously released from the normal healthy endodermis cell layer of the vascular system, plays a crucial role in the stability and health maintenance of blood vessels.

A Positively Charged Surface Triggers Coagulation Activation Through Factor VII Activating Protease (FSAP)

Contact between biomedical materials and blood often initiates undesirable pro-coagulant and pro-inflammatory processes. On negatively charged materials, blood coagulation is known to be triggered through autoactivation of Factor XII, while activation on cationic surfaces follows a distinct and so far enigmatic mechanism. Because Factor VII activating protease (FSAP) is known to be activated on positively and on negatively charged macromolecules in plasma, we have investigated its interaction with charged biomaterials and its consequences for coagulation. Several activation processes in blood and plasma were characterized after contact with material surfaces with varied charge. FSAP was found to be exclusively activated by the positively charged surfaces polyethylenimine (PEI) and poly-l-lysine (PLL), not by the negatively charged glass or self-assembled monolayer with carboxyl group termination (SAM-COOH), as well as uncharged (Teflon AF) surfaces. Whole blood incubation on PEI showed that this activation was concomitant with coagulation as determined by thrombin and fibrin formation, which was high for glass (F1+2, 138 nM) and PEI (F1+2, 44 nM) but low for Teflon AF (F1+2, 3.3 nM) and SAM COOH (F1+2, 5.8 nM). Contact phase inhibitor diminished coagulation to background levels for all surfaces except PEI (F1+2: ^PEI 43 to 25 nM; glass, 58 to 1.5 nM) indicating that coagulation activation is not dependent on FXII activation on the PEI surface. A decisive role of endogenous FSAP for coagulation however was confirmed with the use of FSAP inhibitory antibodies which showed no influence on Teflon AF, glass and SAM COOH but diminished F1+2 on PEI to less than 50%. We propose that FSAP activation could be a novel mechanism of surface-driven coagulation. An inhibition of this protease might improve hemocompatibility of cationic surfaces and therefore facilitate the application of polycationic surfaces in blood.

Surface dependent contact activation of factor XII and blood plasma coagulation induced by mixed thiol surfaces

Studies of the activation of FXII in both platelet poor plasma and in neat buffer solutions were undertaken for a series of mixed thiol self-assembled monolayers spanning a broad range of water wettability. A wide spectrum of carboxyl/methyl-, hydroxyl/methyl-, and amine/methyl-thiol modified surfaces were prepared, characterized, and then utilized as the procoagulant materials in a series of FXII activation studies. X-ray photoelectron spectroscopy was utilized to verify the sample surface's thiol composition and contact angles measured to determine the sample surface's wettability. These samples were then used in in vitro coagulation assays using a 50% mixture of recalcified plasma in phosphate buffered saline. Alternatively, the samples were placed into purified FXII solutions for 30 min to assess FXII activation in neat buffer solution. Plasma coagulation studies supported a strong role for anionic surfaces in contact activation, in line with the traditional models of coagulation, while the activation results in neat buffer solution demonstrated that FXIIa production is related to surface wettability with minimum levels of enzyme activation observed at midrange wettabilities, and no statistically distinguishable differences in FXII activation seen between highly wettable and highly nonwettable surfaces. Results demonstrated that the composition of the solution and the surface properties of the material all contribute to the observation of contact activation, and the activation of FXII is not specific to anionic surfaces as has been long believed.

A comparative multi-parametric in vitro model identifies the power of test conditions to predict the fibrotic tendency of a biomaterial

Despite growing effort to advance materials towards a low fibrotic progression, all implants elicit adverse tissue responses. Pre-clinical biomaterial assessment relies on animals testing, which can be complemented by in vitro tests to address the Russell and Burch’s 3R aspect of reducing animal burden. However, a poor correlation between in vitro and in vivo biomaterial assessments confirms a need for suitable in vitro biomaterial tests. The aim of the study was to identify a test setting, which is predictive and might be time- and cost-efficient. We demonstrated how sensitive in vitro biomaterial assessment based on human primary macrophages depends on test conditions. Moreover, possible clinical scenarios such as lipopolysaccharide contamination, contact to autologous blood plasma, and presence of IL-4 in an immune niche influence the outcome of a biomaterial ranking. Nevertheless, by using glass, titanium, polytetrafluorethylene, silicone, and polyethylene representing a specific material-induced fibrotic response and by comparison to literature data, we were able to identify a test condition that provides a high correlation to state-of-the-art in vivo studies. Most important, biomaterial ranking obtained under native plasma test conditions showed a high predictive accuracy compared to in vivo assessments, strengthening a biomimetic three-dimensional in vitro test platform.

Identifying a size-specific hazard of silica nanoparticles after intravenous administration and its relationship to the other hazards that have negative correlations with the particle size in mice

Many of the beneficial and toxic biological effects of nanoparticles have been shown to have a negative correlation with particle size. However, few studies have demonstrated biological effects that only occur at specific nanoparticle sizes. Further elucidation of the size-specific biological effects of nanoparticles may reveal not only unknown toxicities, but also novel benefits of nanoparticles. We used surface-unmodified silica particles with a wide range of diameters and narrow size intervals between the diameters (10, 30, 50, 70, 100, 300, and 1000 nm) to investigate the relationship between particle size and acute toxicity after intravenous administration in mice. Negative correlations between particle size and thrombocytopenia, liver damage, and lethal toxicity were observed. However, a specific size-effect was observed for the severity of hypothermia, where silica nanoparticles with a diameter of 50 nm induced the most severe hypothermia. Further investigation revealed that this hypothermia was mediated not by histamine, but by platelet-activating factor, and it was independent of the thrombocytopenia and the liver damage. In addition, macrophages/Kupffer cells and platelets, but not neutrophils, play a critical role in the hypothermia. The present results reveal that silica nanoparticles have particle size-specific toxicity in mice, suggesting that other types of nanoparticles may also have biological effects that only manifest at specific particle sizes. Further study of the size-specific effects of nanoparticles is essential for safer and more effective nanomedicines.

The pathology of the foreign body reaction against biomaterials

The healing process after implantation of biomaterials involves the interaction of many contributing factors. Besides their in vivo functionality, biomaterials also require characteristics that allow their integration into the designated tissue without eliciting an overshooting foreign body reaction (FBR). The targeted design of biomaterials with these features, thus, needs understanding of the molecular mechanisms of the FBR. Much effort has been put into research on the interaction of engineered materials and the host tissue. This elucidated many aspects of the five FBR phases, that is protein adsorption, acute inflammation, chronic inflammation, foreign body giant cell formation, and fibrous capsule formation. However, in practice, it is still difficult to predict the response against a newly designed biomaterial purely based on the knowledge of its physical-chemical surface features. This insufficient knowledge leads to a high number of factors potentially influencing the FBR, which have to be analyzed in complex animal experiments including appropriate data-based sample sizes. This review is focused on the current knowledge on the general mechanisms of the FBR against biomaterials and the influence of biomaterial surface topography and chemical and physical features on the quality and quantity of the reaction. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 927-940, 2017.

Nanofibrous polymeric beads from aramid fibers for efficient bilirubin removal

Polymer based hemoperfusion has been developed as an effective therapy to remove the extra bilirubin from patients.

Protein corona changes mediated by surface modification of amorphous silica nanoparticles suppress acute toxicity and activation of intrinsic coagulation cascade in mice

Recently, nanomaterial-mediated biological effects have been shown to be governed by the interaction of nanomaterials with some kinds of proteins in biological fluids, and the physical characteristics of the nanomaterials determine the extent and type of their interactions with proteins. Here, we examined the relationships between the surface properties of amorphous silica nanoparticles with diameters of 70 nm (nSP70), their interactions with some proteins in biological fluids, and their toxicity in mice after intravenous administration. The surface modification of nSP70 with amino groups (nSP70-N) prevented acute lethality and abnormal activation of the coagulation cascade found in the nSP70-treated group of mice. Since our previous study showed that coagulation factor XII played a role in the nSP70-mediated abnormal activation of the coagulation cascade, we examined the interaction of nSP70 and nSP70-N with coagulation factor XII. Coagulation factor XII bonded to the surface of nSP70 to a greater extent than that observed for nSP70-N, and consequently more activation of coagulation factor XII was observed for nSP70 than for nSP70-N. Collectively, our results suggest that controlling the interaction of nSP70 with blood coagulation factor XII by modifying the surface properties would help to inhibit the nSP70-mediated abnormal activation of the blood coagulation cascade.

Proteins, platelets, and blood coagulation at biomaterial interfaces

Blood coagulation and platelet adhesion remain major impediments to the use of biomaterials in implantable medical devices. There is still significant controversy and question in the field regarding the role that surfaces play in this process. This manuscript addresses this topic area and reports on state of the art in the field. Particular emphasis is placed on the subject of surface engineering and surface measurements that allow for control and observation of surface-mediated biological responses in blood and test solutions. Appropriate use of surface texturing and chemical patterning methodologies allow for reduction of both blood coagulation and platelet adhesion, and new methods of surface interrogation at high resolution allow for measurement of the relevant biological factors.

In vitro and in vivo evaluation of blood coagulation activation of polyvinyl alcohol hydrogel plus dextran-based vascular grafts

Polyvinyl alcohol hydrogel (PVA) is a water-soluble synthetic polymer that is commonly used in biomedical applications including vascular grafting. It was argued that the copolymerization of PVA with dextran (Dx) can result in improvement of blood-biomaterial interactions. The focus of this experimental study was to assess that interaction through an in vivo and in vitro evaluation of the coagulation system activation. The thrombogenicity of the copolymer was determined by quantification of platelet adhesion through the lactate dehydrogenase assay, determination of whole blood clotting time, and by quantification of platelet activation by flow cytometry. The thrombin-antithrombin complex blood levels were also determined. The obtained results for the in vitro assays suggested a non-thrombogenic profile for PVA/Dx. Additionally in vivo coagulation and hematological parameters were determined in an animal model after PVA/Dx vascular graft implantation. For coagulation homeostasis assessment, the intrinsic and extrinsic pathway's activation was determined by measuring prothrombin time (PT) and activated partial thromboplastin time (aPTT). Other markers of coagulation and inflammation activation including d-dimers, interleukin-6, and C-reactive protein were also assessed. The PVA/Dx copolymer tended to inhibit platelet adhesion/activation process and the contact activation process for coagulation. These results were also confirmed with the in vivo experiments where the measurements for APTT, interleukin-6, and C-reactive protein parameters were normal considering the species normal range of values. The response to those events is an indicator of the in vitro and in vivo hemocompatibility of PVA/Dx and it allows us to select this biomaterial for further preclinical trials in vascular reconstruction.

Selective depletion of factor XI or factor XII with antisense oligonucleotides attenuates catheter thrombosis in rabbits

Central venous catheter thrombosis can cause venous obstruction and pulmonary embolism. To determine the extent to which catheter thrombosis is triggered by the contact or extrinsic pathway of coagulation, we used antisense oligonucleotides (ASOs) to selectively knock down factor (f)XII, fXI, or high-molecular-weight kininogen (HK), key components of the contact pathway, or fVII, which is essential for the extrinsic pathway. Knockdown of contact pathway components prolonged the activated partial thromboplastin time and decreased target protein activity levels by over 90%, whereas fVII knockdown prolonged the prothrombin time and reduced fVII activity to a similar extent. Using a rabbit model of catheter thrombosis, catheters implanted in the jugular vein were assessed daily until they occluded, up to a maximum of 35 days. Compared with control, fXII and fXI ASO treatment prolonged the time to catheter occlusion by 2.2- and 2.3-fold, respectively. In contrast, both HK and fVII knockdown did not significantly prolong the time to occlusion, and dual treatment with fVII- and fXI-directed ASOs produced a time to occlusion similar to that with the fXI ASO alone. These findings suggest that catheter thrombosis is triggered via the contact pathway and identify fXII and fXI as potential targets to attenuate this complication.

Controlling whole blood activation and resultant clot properties by carboxyl and alkyl functional groups on material surfaces: a possible therapeutic approach for enhancing bone healing

Most research virtually ignores the important role of a blood clot in supporting bone healing.

Zinc-dependent contact system activation induces vascular leakage and hypotension in rodents

Contact to polyanions induces autoactivation of the serine protease factor XII that triggers the kallikrei-kinin system. Recent studies indicate that polysaccharide-induced autoactivation of factor XII has a role in allergy-related vascular leakage, and angioedema. Here, we characterize in vivo effects of the synthetic polysaccharide dextran sulfate in human plasma and in rodent models. Minute amounts of high-molecular-weight dextran sulfate-initiated factor XII-autoactivation and triggered formation of the inflammatory mediator bradykinin via plasma kallikrein-mediated cleavage of high-molecular-weight kininogen. High-molecular-weight kininogen fragments, containing the HKH20 sequence in domain D5H, blocked dextran sulfate-initiated bradykinin-generation by depleting plasma Zn2+ ions. Topical application of high molecular weight dextran sulfate increased leakage in murine skin microvessels, in a bradykinin-dependent manner. Intravital laser scanning microscopy showed a greater than two-fold elevated and accelerated fluid extravasation in C1 esterase inhibitor deficient mice that lack the major inhibitor of factor XII, compared to wild-type controls. Intra-arterial infusion of dextran sulfate induced a rapid transient drop in arterial blood pressure in rats and preinjection of kinin B2 receptor antagonists or HKH20 peptide blunted dextran sulfate-triggered hypotensive reactions. The data characterize dextran sulfate as a potent in vivo activator of factor XII with implications for bradykinin-mediated vascular permeability and blood pressure control.

Quantitative characterization of the activation steps of mannan-binding lectin (MBL)-associated serine proteases (MASPs) points to the central role of MASP-1 in the initiation of the complement lectin pathway

Mannan-binding lectin (MBL)-associated serine proteases, MASP-1 and MASP-2, have been thought to autoactivate when MBL/ficolin·MASP complexes bind to pathogens triggering the complement lectin pathway. Autoactivation of MASPs occurs in two steps: 1) zymogen autoactivation, when one proenzyme cleaves another proenzyme molecule of the same protease, and 2) autocatalytic activation, when the activated protease cleaves its own zymogen. Using recombinant catalytic fragments, we demonstrated that a stable proenzyme MASP-1 variant (R448Q) cleaved the inactive, catalytic site Ser-to-Ala variant (S646A). The autoactivation steps of MASP-1 were separately quantified using these mutants and the wild type enzyme. Analogous mutants were made for MASP-2, and rate constants of the autoactivation steps as well as the possible cross-activation steps between MASP-1 and MASP-2 were determined. Based on the rate constants, a kinetic model of lectin pathway activation was outlined. The zymogen autoactivation rate of MASP-1 is ∼3000-fold higher, and the autocatalytic activation of MASP-1 is about 140-fold faster than those of MASP-2. Moreover, both activated and proenzyme MASP-1 can effectively cleave proenzyme MASP-2. MASP-3, which does not autoactivate, is also cleaved by MASP-1 quite efficiently. The structure of the catalytic region of proenzyme MASP-1 R448Q was solved at 2.5 Å. Proenzyme MASP-1 R448Q readily cleaves synthetic substrates, and it is inhibited by a specific canonical inhibitor developed against active MASP-1, indicating that zymogen MASP-1 fluctuates between an inactive and an active-like conformation. The determined structure provides a feasible explanation for this phenomenon. In summary, autoactivation of MASP-1 is crucial for the activation of MBL/ficolin·MASP complexes, and in the proenzymic phase zymogen MASP-1 controls the process.

The structure of the FnI-EGF-like tandem domain of coagulation factor XII solved using SIRAS

Coagulation factor XII (FXII) is a key protein in the intrinsic coagulation and kallikrein-kinin pathways. It has been found that negative surfaces and amyloids, such as Aβ fibrils, can activate FXII. Additionally, it has been suggested that FXII simulates cells and that it plays an important role in thrombosis. To date, no structural data on FXII have been deposited, which makes it difficult to support any hypothesis on the mechanism of FXII function. The crystal structure of the FnI-EGF-like tandem domain of FXII presented here was solved using experimental phases. To determine the phases, a SIRAS approach was used with a native and a holmium chloride-soaked data set. The holmium cluster was coordinated by the C-terminal tails of two symmetry-related molecules. Another observation was that the FnI domain was much more ordered than the EGF-like domain owing to crystal packing. Furthermore, the structure shows the same domain orientation as the homologous FnI-EGF-like tandem domain of tPA. The plausibility of several proposed interactions of these domains of FXII is discussed. Based on this FXII FnI-EGF-like structure, it could be possible that FXII binding to amyloid and negatively charged surfaces is mediated via this part of FXII.