The development of peptide-based interfacial biomaterials for generating biological functionality on the surface of bioinert materials

Semi-Biosynthetic Production of Surface-Binding Adhesive Antimicrobial Peptides Using Intein-Mediated Protein Ligation

Microbial infections remain a global health concern, calling for the urgent need to implement effective prevention measures. Antimicrobial peptides (AMPs) have been extensively studied as potential antimicrobial coating agents. However, an efficient and economical method for AMP production is lacking. Here, we synthesized the direct coating adhesive AMP, NKC-DOPA₅, composed of NKC, a potent AMP, and repeats of the adhesive amino acid 3,4-dihydroxyphenylalanine (DOPA) via an intein-mediated protein ligation strategy. NKC was expressed as a soluble fusion protein His-NKC-GyrA (HNG) in Escherichia coli, comprising an N-terminal 6× His-tag and a C-terminal Mxe GyrA intein. The HNG protein was efficiently produced in a 500-L fermenter, with a titer of 1.63 g/L. The NKC-thioester was released from the purified HNG fusion protein by thiol attack and subsequently ligated with chemically synthesized Cys-DOPA₅. The ligated peptide His-NKC-Cys-DOPA₅ was obtained at a yield of 88.7%. The purified His-NKC-Cys-DOPA₅ possessed surface-binding and antimicrobial properties identical to those of the peptide obtained via solid-phase peptide synthesis. His-NKC-Cys-DOPA₅ can be applied as a practical and functional antimicrobial coating to various materials, such as medical devices and home appliances.

Hydroxyapatite-incorporation improves bone formation on endosseous PEEK implant in canine tibia

BACKGROUND

Poly Ether Ether Ketone (PEEK) has been considered as a potential alternative material for endosseous dental implants, for its low elastic modulus, biocompatibility, and low cost in customized device manufacture. Hydroxyapatite-incorporation is supposed to improve the poor osseointegration of PEEK.

METHODS

In the present study we analyzed the in vivo response of hydroxyapatite-incorporated PEEK (PEEK-HA) implants in canine tibia. PEEK-HA and PEEK implants were implanted and were examined 4 weeks and 12 weeks after implantation with radiology and histology. Commercial titanium dental implants served as controls.

RESULTS

The ratio of bone volume to tissue volume of PEEK-HA implants was higher than that of PEEK implants 4 weeks after implantation in the μ-CT analysis. The bone implant contact of PEEK and PEEK-HA implants showed no statistical difference in the histological examination, but newly-formed bone around PEEK-HA implants showed more signs of mineralization than that around PEEK implants.

CONCLUSION

The study suggested that bone formation was improved with hydroxyapatite-incorporation in PEEK. Hydroxyapatite-incorporated PEEK implants may represent a potential material for endosseous dental implant.

Covalent Protein Immobilization onto Muscovite Mica Surface with a Photocrosslinker

Muscovite mica with an amino silane-modified surface is commonly used as a substrate in atomic force microscopy (AFM) studies of biological macromolecules. Herein, the efficiency of two different protein immobilization strategies employing either (N-hydroxysuccinimide ester)-based crosslinker (DSP) or benzophenone-based photoactivatable crosslinker (SuccBB) has been compared using AFM and mass spectrometry analysis. Two proteins with different physicochemical properties—human serum albumin (HSA) and horseradish peroxidase enzyme protein (HRP)—have been used as model objects in the study. In the case of HRP, both crosslinkers exhibited high immobilization efficiency—as opposed to the case with HSA, when sufficient capturing efficiency has only been observed with SuccBB photocrosslinker. The results obtained herein can find their application in commonly employed bioanalytical systems and in the development of novel highly sensitive chip-based diagnostic platforms employing immobilized proteins. The obtained data can also be of interest for other research areas in medicine and biotechnology employing immobilized biomolecules.

A novel biofunctionalizing peptide for metallic alloy

OBJECTIVES

Improving biocompatibility of metallic alloy biomaterials has been of great interest to prevent implant associated-diseases, such as stent thrombosis. Herein a simple and efficient procedure was designed to biofunctionalize a biomaterial surface by isolating a SUS316L stainless steel binding peptide.

RESULTS

After three rounds of phage panning procedure, 12 mer peptide (SBP-A; VQHNTKYSVVIR) was identified as SUS316L-binding peptide. The SBP-A peptide formed a stable bond to a SUS316L modified surface and was not toxic to HUVECs. The SBP-A was then used for anti-ICAM antibody modification on SUS316L to construct a vascular endothelial cell-selective surface. The constructed surface dominantly immobilized vascular endothelial cells to smooth muscle cells, demonstrating that the SBP-A enabled simple immobilization of biomolecules without disturbing their active biological function.

CONCLUSIONS

The SUS316L surface was successfully biofunctionalized using the novel isolated peptide SBP-A, showing its potential as an ideal interface molecule for stent modification. This is the first report of material binding peptide-based optimal surface functionalization to promote endothelialisation. This simple and efficient biofunctionalization procedure is expected to contribute to the development of biocompatible materials.

Bilayered BMP2 Eluting Coatings on Graphene Foam by Electrophoretic Deposition: Electroresponsive BMP2 Release and Enhancement of Osteogenic Differentiation

Recent development of three-dimensional graphene foam (GF) with conductive and interconnected macroporous structure is attracting particular attention as platforms for tissue engineering. However, widespread application of GF as bone scaffolds is restricted due to its poor mechanical property and inert surface character. To overcome these drawbacks, in this study, a bilayered biopolymer coating was designed and successfully deposited covering the entire surface area of GF skeleton. A poly(lactic-co-glycolic acid) layer was first dip-coated to strengthen the GF substrate, followed by the electrophoretic codeposition of a hybrid layer, consisting of chitosan and BMP2, to functionalize GF with the ability to recruit and induce osteogenic differentiation of hMSC. Our data indicated that the mechanical property of GF was significantly increased without compromising the macroporous structure. Importantly, the immobilized BMP2 exhibited sustained and electroresponsive release profiles with rapid response to the electric field exerted on GF, which is beneficial to balancing BMP2 dose in a physiological environment. Moreover, the osteogenic differentiation of hMSC was significantly improved on the functionalized GF. Taking advantage of the unique macrostructure from GF as well as the superior mechanical properties and BMP2 release profile supported by the deposited coatings, it is therefore expected that the developed GF could be a promising alternative as innovative bone-forming favorable scaffolds.

Lysine-Grafted MCM-41 Silica as an Antibacterial Biomaterial

This paper proposes a facile strategy for the zwitterionization of bioceramics that is based on the direct incorporation of l-lysine amino acid via the ε-amino group onto mesoporous MCM-41 materials. Fourier transform infrared (FTIR) studies of lysine-grafted MCM-41 (MCM-LYS) simultaneously showed bands at 3080 and 1540 cm-1 and bands at 1625 and 1415 cm-1 corresponding to -NH3+/COO- pairs, which demonstrate the incorporation of the amino acid on the material surface keeping its zwitterionic character. Both elemental and thermogravimetric analyses showed that the amount of grafted lysine was 8 wt. % based on the bioceramic total weight. Moreover, MCM-LYS exhibited a reduction of adhesion of S. aureus and E. coli bacteria in 33% and 50%, respectively at physiological pH, as compared with pristine MCM-41. Biofilm studies onto surfaces showed that lysine functionalization elicited a reduction of the area covered by S. aureus biofilm from 42% to only 5% (88%). This research shows a simple and effective approach to chemically modify bioceramics using single amino acids that provides zwitterionic functionality, which is useful to develop new biomaterials that are able to resist bacterial adhesion.

Surface-bound collagen 4 is significantly more stable than collagen 1

Collagen 1 (C1) is commonly used to improve biological responses to implant surfaces. Here, the stability of C1 was compared with collagen 4 (C4) on a mixed macrodiol polyurethane, both adsorbed and covalently bound via acetaldehyde glow discharge polymerization and reductive amination. Substrate specimens were incubated in solutions of C1 and C4. The strength of conjugation was tested by incubation in 8 M urea followed by enzyme linked immunosorbent assays to measure residual C1 and C4. The basal lamina protein, laminin-332 (L332) was superimposed via adsorption on C4-treated specimens. Keratinocytes were grown on untreated, C1-treated, C4-treated, and C4 + L332-treated specimens, followed by measurement of cell area, proliferation, and focal adhesion density. Adsorbed C4 was shown to be significantly more stable than C1 and covalent conjugation conferred even greater stability, with no degradation of C4 over twenty days in 8 M urea. Cell growth was similar for C1 and C4, with no additional benefit conferred by superimposition of L332. The greater resistance of C4 to degradation may be consequent to cysteine residues and disulphide bonds in its non-collagenous domains. The use of C4 on implants, rather than C1, may improve their long-term stability in tissues. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1364-1373, 2017.

Correlating single-molecule and ensemble-average measurements of peptide adsorption onto different inorganic materials

The coating of solid-binding peptides (SBPs) on inorganic material surfaces holds significant potential for improved surface functionalization at nano-bio interfaces. In most related studies, the goal has been to engineer peptides with selective and high binding affinity for a target material. The role of the material substrate itself in modulating the adsorption behavior of a peptide molecule remains less explored and there are few studies that compare the interaction of one peptide with different inorganic substrates. Herein, using a combination of two experimental techniques, we investigated the adsorption of a 16 amino acid-long random coil peptide to various inorganic substrates - gold, silicon oxide, titanium oxide and aluminum oxide. Quartz crystal microbalance-dissipation (QCM-D) experiments were performed in order to measure the peptide binding affinity for inorganic solid supports at the ensemble average level, and atomic force microscopy (AFM) experiments were conducted in order to determine the adhesion force of a single peptide molecule. A positive trend was observed between the total mass uptake of attached peptide and the single-molecule adhesion force on each substrate. Peptide affinity for gold was appreciably greater than for the oxide substrates. Collectively, the results obtained in this study offer insight into the ways in which inorganic materials can differentially influence and modulate the adhesion of SBPs.

Surface functionalization of polymer substrates with hydroxyapatite using polymer-binding peptides

Material-binding peptides are used as non-covalent bond linkers for surface functionalization because they bind to materials under mild conditions without affecting the properties of the materials and are functionalized by conjugating with other molecules. In the present study, the surface functionalization of polyetherimide (PEI) with hydroxyapatite (HAp) was examined using two types of PEI-binding peptides conjugated with other sequences. One peptide consisted of PEI-binding peptide p1 (TGADLNT) and a triasparate sequence for the biomimetic mineralization of HAp in simulated body fluids (SBFs), while the other consisted of p1 and HAp-binding peptide (HABP, CMLPHHGAC) for the immobilization of HAp and amorphous calcium phosphate (ACP) nanoparticles. The results obtained revealed deposits of HAp on PEI films treated with the peptide consisting of p1 and triasparate. HAp and ACP nanoparticles were immobilized on PEI films treated with peptides consisting of p1 and HABP, and immersion of the resultant substrates in SBFs completely covered the surfaces of PEI films with HAp.

Toward a skin-material interface with vacuum-integrated capped macroporous scaffolds

Avulsion, epidermal marsupialization, and infection cause failure at the skin-material interface. A robust interface would permit implantable robotics, prosthetics, and other medical devices; reconstruction of surgical defects, and long-term access to blood vessels and body cavities. Torus-shaped cap-scaffold structures were designed to work in conjunction with negative pressure to address the three causes of failure. Six wounds were made on the backs of each of four 3-month old pigs. Four unmodified (no caps) scaffolds were implanted along with 20 cap-scaffolds. Collagen type 4 was attached to 21 implants. Negative pressure then was applied. Structures were explanted and assessed histologically at day 7 and day 28. At day 28, there was close tissue apposition to scaffolds, without detectable reactions from defensive or interfering cells. Three cap-scaffolds explanted at day 28 showed likely attachment of epidermis to the cap or cap-scaffold junction, without deeper marsupialization. The combination of toric-shaped cap-scaffolds with negative pressure appears to be an intrinsically biocompatible system, enabling a robust skin-material interface. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1307-1318, 2017.

Xylan hemicellulose improves chitosan hydrogel for bone tissue regeneration

The hemicellulose xylan, which has immunomodulatory effects, has been combined with chitosan to form a composite hydrogel to improve the healing of bone fractures. This thermally responsive and injectable hydrogel, which is liquid at room temperature and gels at physiological temperature, improves the response of animal host tissue compared with similar pure chitosan hydrogels in tissue engineering models. The composite hydrogel was placed in a subcutaneous model where the composite hydrogel is replaced by host tissue within 1 week, much earlier than chitosan hydrogels. A tibia fracture model in mice showed that the composite encourages major remodeling of the fracture callus in less than 4 weeks. A non-union fracture model in rat femurs was used to demonstrate that the composite hydrogel allows bone regeneration and healing of defects that with no treatment are unhealed after 6 weeks. These results suggest that the xylan/chitosan composite hydrogel is a suitable bone graft substitute able to aid in the repair of large bone defects.

Preparation, characterization, cellular response and in vivo osseointegration of polyetheretherketone/nano-hydroxyapatite/carbon fiber ternary biocomposite

As FDA-approved implantable material, polyetheretherketone (PEEK) is becoming a prime candidate to replace traditional surgical metallic implants made of titanium (Ti) and its alloys, since it has a lower elastic modulus than Ti. The bioinertness and defective osteointegration of PEEK, however, limit its clinical adoption as load-bearing dental/orthopedic material. The present work aimed at developing a PEEK bioactive ternary composite, polyetheretherketone/nano-hydroxyapatite/carbon fiber (PEEK/n-HA/CF), and evaluating it as a potential bone-repairing material by assessment of growth and differentiation of osteoblast-like MG63 cells and by estimation of osteointegration in vivo. Our results indicated that the adhesion, proliferation and osteogenic differentiation of cells, as well as the mechanical properties were greatly promoted for the PEEK/n-HA/CF biocomposite compared with pure PEEK matrix. More importantly, the ternary composite implant boosted in vivo bioactivity and osseointegration in canine tooth defect model. Thus, the PEEK/n-HA/CF ternary biocomposite with enhanced mechanics and biological performances hold great potential as bioactive implant material in dental and orthopedic applications.

Chimeric peptides as implant functionalization agents for titanium alloy implants with antimicrobial properties

Implant-associated infections can have severe effects on the longevity of implant devices and they also represent a major cause of implant failures. Treating these infections associated with implants by antibiotics is not always an effective strategy due to poor penetration rates of antibiotics into biofilms. Additionally, emerging antibiotic resistance poses serious concerns. There is an urge to develop effective antibacterial surfaces that prevent bacterial adhesion and proliferation. A novel class of bacterial therapeutic agents, known as antimicrobial peptides (AMP's), are receiving increasing attention as an unconventional option to treat septic infection, partly due to their capacity to stimulate innate immune responses and for the difficulty of microorganisms to develop resistance towards them. While host- and bacterial- cells compete in determining the ultimate fate of the implant, functionalization of implant surfaces with antimicrobial peptides can shift the balance and prevent implant infections. In the present study, we developed a novel chimeric peptide to functionalize the implant material surface. The chimeric peptide simultaneously presents two functionalities, with one domain binding to a titanium alloy implant surface through a titanium-binding domain while the other domain displays an antimicrobial property. This approach gains strength through control over the bio-material interfaces, a property built upon molecular recognition and self-assembly through a titanium alloy binding domain in the chimeric peptide. The efficiency of chimeric peptide both in-solution and absorbed onto titanium alloy surface was evaluated in vitro against three common human host infectious bacteria, S. mutans, S. epidermidis, and E. coli. In biological interactions such as occurs on implants, it is the surface and the interface that dictate the ultimate outcome. Controlling the implant surface by creating an interface composed chimeric peptides may therefore open up new possibilities to cover the implant site and tailor it to a desirable bioactivity.

Prospects of common biomolecules as coating substances for polymeric biomaterials

The concept of using common biomolecules like proteins, carbohydrates,etc., for improving the biocompatibility seems rational and effective because of the bio-friendly surface that they present, remains closer in mimicking the innate environment.

Preparation, characterization, in vitro bioactivity, and cellular responses to a polyetheretherketone bioactive composite containing nanocalcium silicate for bone repair

In this study, a nanocalcium silicate (n-CS)/polyetheretherketone (PEEK) bioactive composite was prepared using a process of compounding and injection-molding. The mechanical properties, hydrophilicity, and in vitro bioactivity of the composite, as well as the cellular responses of MC3T3-E1 cells (attachment, proliferation, spreading, and differentiation) to the composite, were investigated. The results showed that the mechanical properties and hydrophilicity of the composites were significantly improved by the addition of n-CS to PEEK. In addition, an apatite-layer formed on the composite surface after immersion in simulated body fluid (SBF) for 7 days. In cell culture tests, the results revealed that the n-CS/PEEK composite significantly promoted cell attachment, proliferation, and spreading compared with PEEK or ultrahigh molecular weight polyethylene (UHMWPE). Moreover, cells grown on the composite exhibited higher alkaline phosphatase (ALP) activity, more calcium nodule-formation, and higher expression levels of osteogenic differentiation-related genes than cells grown on PEEK or UHMWPE. These results indicated that the incorporation of n-CS to PEEK could greatly improve the bioactivity and biocompatibility of the composite. Thus, the n-CS/PEEK composite may be a promising bone repair material for use in orthopedic clinics.

Targeting prostate carcinoma by G3-C12 peptide conjugated N-(2-hydroxypropyl)methacrylamide copolymers

Prostate carcinoma is the second leading cause of cancer-related deaths. Increased expression of membrane-bound galectin-3 by prostate carcinoma cell has been found to correlate with more poorly differentiated and increased metastatic potential. In the present study, different amount of galectin-3-binding peptide, G3-C12 (the sequence ANTPCGPYTHDCPVKR), was attached to N-(2-hydroxypropyl)methacrylamide (HPMA) copolymers as targeting moiety. The results of qPCR and competitive binding test indicated that the expression level of galectin-3 in two metastatic prostate carcinoma cell lines (PC-3 and DU145 cells) could be significantly suppressed by the addition of G3-C12-modified HPMA copolymers (PG1 and PG2), demonstrating the high affinity of PG1 and PG2 to galectin-3. Due to the multivalent effects of moieties, the uptake of copolymers was remarkably enhanced with the increasing amount of conjugated G3-C12 peptide. A higher internalization of PG1 and PG2 occurred in PC-3 cells via caveolin- and clathrin-mediated endocytosis, whereas a clathrin-mediated uptake process was involved in DU145 cells. The in vivo biodistribution and pharmacokinetics of nonmodified ((131)I-pHPMA) and G3-C12-modified ((131)I-PG1 and (131)I-PG2) copolymers were estimated on a well-established mice model bearing PC-3 xenografts by (131)I-SPECT-imaging. Higher tumor accumulation of (131)I-PG1 (1.60 ± 0.08% ID/g, p < 0.05) and (131)I-PG2 (1.54 ± 0.06% ID/g, p < 0.05) was observed compared with (131)I-pHPMA (1.19 ± 0.04% ID/g) at 2 h post-intravenous injection. Although the amount of conjugated G3-C12 peptide performed a remarkable in vitro effect on the affinity and internalization of HPMA copolymers to the galectin-3 overexpressed prostate carcinoma cells, the molecular weight and ligand modification all play important roles on their in vivo tumor accumulation.

Investigation of the peptide adsorption on ZrO2, TiZr, and TiO2 surfaces as a method for surface modification

Specific surface binding peptides offer a versatile and interesting possibility for the development of biocompatible implant materials. Therefore, eight peptide sequences were examined in regard to their adsorption on zirconium oxide (ZrO2), titanium zircon (TiZr), and titanium (c.p. Ti). Surface plasmon resonance (SPR) measurements were performed on Ti coated sensor chips to determine the kinetics of the interactions and kinetic rate constants (kon, koff, KD, and Rmax). We also investigated the interactions which are present in our system. Electrostatic and coordinative interactions were found to play a major role in the adsorption process. Four of the eight examined peptide sequences showed a significant adsorption on all investigated materials. Moreover, the two peptides with the highest adsorption could be quantified (up to 370 pmol/cm(2)). For potential biomaterials applications, we proved the stability of the adsorption of selected peptides in cell culture media, under competition with proteins and at body temperature (37 °C), and their biocompatibility via their effects on the adhesion and proliferation of human mesenchymal stem cells (hMSCs). The results qualify the peptides as anchor peptides for the biofunctionalization of implants.

Selective detection of target proteins by peptide-enabled graphene biosensor

Direct molecular detection of biomarkers is a promising approach for diagnosis and monitoring of numerous diseases, as well as a cornerstone of modern molecular medicine and drug discovery. Currently, clinical applications of biomarkers are limited by the sensitivity, complexity and low selectivity of available indirect detection methods. Electronic 1D and 2D nano-materials such as carbon nanotubes and graphene, respectively, offer unique advantages as sensing substrates for simple, fast and ultrasensitive detection of biomolecular binding. Versatile methods, however, have yet to be developed for simultaneous functionalization and passivation of the sensor surface to allow for enhanced detection and selectivity of the device. Herein, we demonstrate selective detection of a model protein against a background of serum protein using a graphene sensor functionalized via self-assembling multifunctional short peptides. The two peptides are engineered to bind to graphene and undergo co-assembly in the form of an ordered monomolecular film on the substrate. While the probe peptide displays the bioactive molecule, the passivating peptide prevents non-specific protein adsorption onto the device surface, ensuring target selectivity. In particular, we demonstrate a graphene field effect transistor (gFET) biosensor which can detect streptavidin against a background of serum bovine albumin at less than 50 ng/ml. Our nano-sensor design, allows us to restore the graphene surface and utilize each sensor in multiple experiments. The peptide-enabled gFET device has great potential to address a variety of bio-sensing problems, such as studying ligand-receptor interactions, or detection of biomarkers in a clinical setting.

Nanowell-trapped charged ligand-bearing nanoparticle surfaces: a novel method of enhancing flow-resistant cell adhesion

Assuring cell adhesion to an underlying biomaterial surface is vital in implant device design and tissue engineering, particularly under circumstances where cells are subjected to potential detachment from overriding fluid flow. Cell-substrate adhesion is a highly regulated process involving the interplay of mechanical properties, surface topographic features, electrostatic charge, and biochemical mechanisms. At the nanoscale level, the physical properties of the underlying substrate are of particular importance in cell adhesion. Conventionally, natural, pro-adhesive, and often thrombogenic, protein biomaterials are frequently utilized to facilitate adhesion. In the present study, nanofabrication techniques are utilized to enhance the biological functionality of a synthetic polymer surface, polymethymethacrylate, with respect to cell adhesion. Specifically we examine the effect on cell adhesion of combining: 1. optimized surface texturing, 2. electrostatic charge and 3. cell adhesive ligands, uniquely assembled on the substrata surface, as an ensemble of nanoparticles trapped in nanowells. Our results reveal that the ensemble strategy leads to enhanced, more than simply additive, endothelial cell adhesion under both static and flow conditions. This strategy may be of particular utility for enhancing flow-resistant endothelialization of blood-contacting surfaces of cardiovascular devices subjected to flow-mediated shear.

Biological response on a titanium implant-grade surface functionalized with modular peptides

Titanium (Ti) and its alloys are among the most successful implantable materials for dental and orthopedic applications. The combination of excellent mechanical and corrosion resistance properties makes them highly desirable as endosseous implants that can withstand a demanding biomechanical environment. Yet, the success of the implant depends on its osteointegration, which is modulated by the biological reactions occurring at the interface of the implant. A recent development for improving biological responses on the Ti-implant surface has been the realization that bifunctional peptides can impart material binding specificity not only because of their molecular recognition of the inorganic material surface, but also through their self-assembly and ease of biological conjugation properties. To assess peptide-based functionalization on bioactivity, the present authors generated a set of peptides for implant-grade Ti, using cell surface display methods. Out of 60 unique peptides selected by this method, two of the strongest titanium binding peptides, TiBP1 and TiBP2, were further characterized for molecular structure and adsorption properties. These two peptides demonstrated unique, but similar molecular conformations different from that of a weak binder peptide, TiBP60. Adsorption measurements on a Ti surface revealed that their disassociation constants were 15-fold less than TiBP60. Their flexible and modular use in biological surface functionalization were demonstrated by conjugating them with an integrin recognizing peptide motif, RGDS. The functionalization of the Ti surface by the selected peptides significantly enhanced the bioactivity of osteoblast and fibroblast cells on implant-grade materials.

Peptide linkers for the immobilization of bioactive molecules on biphasic calcium phosphate via a modular immobilization system

Herein we describe the use of peptide linkers to establish a nucleic acid-based immobilization system based on biphasic calcium phosphates (BCP), with which different molecules can be immobilized at the same time in defined ratios. It consists of single-stranded oligonucleotides, anchor strands (AS) which are immobilized to the surface and conjugates of complementary strands (CS) and bioactive molecules that bind to the AS via Watson-Crick base pairing. AS immobilization can be achieved on calcium phosphate ceramics using conjugates of AS and peptides that bind specifically to the ceramic. We successfully immobilized three different peptide sequences on BCP. Among them, we identified Stath (DpSpS EEK FLR RIG RFG, phosphoserine) as the most suitable one and further immobilized Stath-AS conjugates on BCP. This immobilized AS was able to hybridize with CS. Unspecific adsorption of oligonucleotides on the BCP surface was negligible. The stability of the system was proven by short term desorption experiments. The amounts of immobilized peptides, oligonucleotides and peptide-AS conjugates were determined by an enzymatic assay using biotin-streptavidin interactions, and were found to reach surface densities that are of therapeutic relevance (0.03 pmol cm(-2)).

Surface modification and drug delivery for biointegration

Biointegration refers to the interconnection between a biomedical device and the recipient tissue. In many implant devices, the lack of proper biointegration can cause device failure and potentially serious medical problems. This review summarizes the recent progress in surface chemistry, drug delivery and antifouling methods to improve the biointegration of implants. Much progress has been made as our understanding of biological systems and material properties expands and as new technologies become available. This article addresses methods of enhancing biointegration by means of modifying implant surface chemistry and by drug-delivery approaches.

Controlling the surface chemistry of graphite by engineered self-assembled peptides

The systematic control over surface chemistry is a long-standing challenge in biomedical and nanotechnological applications for graphitic materials. As a novel approach, we utilize graphite-binding dodecapeptides that self-assemble into dense domains to form monolayer-thick long-range-ordered films on graphite. Specifically, the peptides are rationally designed through their amino acid sequences to predictably display hydrophilic and hydrophobic characteristics while maintaining their self-assembly capabilities on the solid substrate. The peptides are observed to maintain a high tolerance for sequence modification, allowing control over surface chemistry via their amino acid sequence. Furthermore, through a single-step coassembly of two differently designed peptides, we predictably and precisely tune the wettability of the resulting functionalized graphite surfaces from 44° to 83°. The modular molecular structures and predictable behavior of short peptides demonstrated here give rise to a novel platform for functionalizing graphitic materials that offers numerous advantages, including noninvasive modification of the substrate, biocompatible processing in an aqueous environment, and simple fusion with other functional biological molecules.

Targeting the brain with PEG-PLGA nanoparticles modified with phage-displayed peptides

The relative impermeability of the blood-brain barrier (BBB) results from tight junctions and efflux transport systems limits drug delivery to the central nervous system (CNS), and thus severely restricts the therapy of many central nervous system diseases. In order to enhance the brain-specific drug delivery, we employed a 12-mer phage display peptide library to isolate peptides that could target the drug delivery system to the brain. A 12-amino-acid-peptide (denoted as Pep TGN) which was displayed by bacteriophage Clone 12-2 was finally selected by rounds of in vivo screening. Pep TGN was covalently conjugated onto the surface of poly (ethyleneglycol)-poly (lactic-co-glycolic acid) (PEG-PLGA) based nanoparticles (NPs). The cellular uptake of Pep TGN decorated nanoparticles was significantly higher than that of unmodified nanoparticles when incubated with bEnd.3 cells. Enhanced brain accumulation efficiency together with lower accumulation in liver and spleen was observed in the nude mice intravenously injected with Pep TGN conjugated nanoparticles compared with those injected with plain nanoparticles, showing powerful brain selectivity of Pep TGN. Coumarin 6 was used as a fluorescent probe for the evaluation of brain delivery properties. The brain Drug Targeting Index (DTI) of coumarin 6 incorporated in targeted nanoparticles was significantly higher than that of coumarin 6 incorporated in plain nanoparticles. In conclusion, the Pep TGN is a motif never been reported before and Pep TGN modified nanoparticles showed great potential in targeted drug delivery across the blood brain barrier.

Polymer-binding peptides for the noncovalent modification of polymer surfaces: effects of peptide density on the subsequent immobilization of functional proteins

Peptides that specifically bind to polyetherimide (PEI) were selected, characterized, and used for the noncovalent modification of the PEI surface. The peptides were successfully identified from a phage-displayed peptide library. A chemically-synthesized peptide composed of the Thr-Gly-Ala-Asp-Leu-Asn-Thr sequence showed an extremely high binding constant for the PEI films (5.6 × 10(8) M(-1)), which was more than three orders of magnitude greater than that for the reference polystyrene films. The peptide was biotinylated and immobilized onto the PEI films to further immobilize streptavidin (SAv). The amount of SAv bound depended on the density of immobilized peptide. It gradually increased with an increasing density of immobilized peptide and achieved a maximum (2.1 pmol cm(-2)) at a peptide density of 19.8 pmol cm(-2). The ratio of peptide used for immobilizing SAv at the maximum value was only 11%, and was partially due to the low accessibility of SAv to the biotin moieties on the PEI films. Moreover, the amount of SAv bound gradually decreased at higher peptide densities, suggesting that the clustering of the peptides also inhibited the binding of SAv. Furthermore, peptides on the PEI films promoted the uniform immobilization of SAv with less structural denaturing. The immobilized SAv was able to further immobilize probe DNA to hybridize with its complementary DNA. These present results suggest that the density of immobilized peptide has a great impact on the surface modifications using polymer-binding peptides.

Bioactive stent surface coating that promotes endothelialization while preventing platelet adhesion

A bifunctional peptide coating was designed, synthesized, and evaluated as a potential pro-healing stent coating. The bifunctional peptide consisted of a short 28-mer sequence that on the N-terminus has a motif with affinity for polystyrene binding and at the C-terminus has a motif that was shown to bind selectively human endothelial cells but not platelets. Results showed that the selective coating, a polystyrene-binding peptide terminated in RRETAWA (FFSFFFPASAWGSSGSSGK(biotin)CRRETAWAC), bound endothelial cells quantitatively as well as the common RGD motif, but unlike RGD, it did not show any preference for platelet adherence. Follow-up work examining the difference in cell line selectivity between endothelial cells, whose binding should be encouraged, and smooth muscle cells, whose binding should be deprecated in a stenting application, did identify a temporal preference of the RRETAWA-terminated peptide coating for endothelial cells. However, the in vivo implications of this apparent selectivity need to be examined in more detail before definitive conclusions can be drawn. The positive in vitro results encourage the continued development of other novel coatings that mimic biological structures, signaling capabilities, or both to direct cellular processes on the surface of synthetic materials.

Staphylococcus aureus resistance on titanium coated with multivalent PEGylated-peptides

Bacterial infections can have adverse effects on the efficacy, lifetime and safety of an implanted device and are the second most commonly attributed cause of orthopedic implant failure. We have previously shown the assembly of PEGylated titanium-binding peptides (TBPs) on Ti to obtain a bacteriophobic surface coating that can effectively resist protein adsorption and Staphylococcus aureus (S. aureus) adhesion. In the present study, we examine the effect of multiple TBP repeats on coating performance in vitro. Mono, di, and tetravalent peptides were synthesized and assessed for binding affinity and serum stability. PEGylated analogs were prepared and evaluated for their effect on S. aureus attachment and biofilm formation. Coating performance improved with the number of TBP repeats, with the tetravalent coating, TBP(4)-PEG, showing the best performance in all assays. In particular, TBP(4)-PEG forms a serum-resistant surface coating capable of preventing S. aureus colonization and subsequent biofilm formation. These results further support the role that multivalency can play in the development of improved surface coatings with enhanced stabilities and efficacy for in vivo clinical use.

Secondary structure in de novo designed peptides induced by electrostatic interaction with a lipid bilayer membrane

We show that it is possible to induce a defined secondary structure in de novo designed peptides upon electrostatic attachment to negatively charged lipid bilayer vesicles without partitioning of the peptides into the membrane, and that the secondary structure can be varied via small changes in the primary amino acid sequence of the peptides. The peptides have a random-coil conformation in solution, and results from far-UV circular dichroism spectroscopy demonstrate that the structure induced by the interaction with silica nanoparticles is solely alpha-helical and also strongly pH-dependent. The present study shows that negatively charged vesicles, to which the peptides are electrostatically adsorbed via cationic amino acid residues, induce either alpha-helices or beta-sheets and that the conformation is dependent on both lipid composition and variations in peptide primary structure. The pH-dependence of the vesicle-induced peptide secondary structure is weak, which correlates well with small differences in the vesicles' electrophoretic mobility, and thus the surface charge, as the pH is varied.

Hybrid antimicrobial enzyme and silver nanoparticle coatings for medical instruments

We report a method for the synthesis of antimicrobial coatings on medical instruments that combines the bacteriolytic activity of lysozyme and the biocidal properties of silver nanoparticles. Colloidal suspensions of lysozyme and silver nanoparticles were electrophoretically deposited onto the surface of stainless steel surgical blades and needles. Electrodeposited films firmly adhered to stainless steel surfaces even after extensive washing and retained the hydrolytic properties of lysozyme. The antimicrobial efficacy of coatings was tested by using blades and needles in an in vitro lytic assay designed to mimic the normal application of the instruments. Coated blades and needles were used to make incisions and punctures, respectively, into agarose infused with bacterial cells. Cell lysis was seen at the contact sites, demonstrating that antimicrobial activity is transferred into the media, as well as retained on the surface of the blades and needles. Blade coatings also exhibited antimicrobial activity against a range of bacterial species. In particular, coated blades demonstrated potent bactericidal activity, reducing cell viability by at least 3 log within 1.5 h for Klebsiella pneumoniae, Bacillus anthracis Sterne, and Bacillus subtilis and within 3 h for Staphylococcus aureus and Acinetobacter baylyi. The results confirmed that complex antimicrobial coatings can be created using facile methods for silver nanoparticle synthesis and electrodeposition.