Directional BMP-2 for functionalization of titanium surfaces

Fabrication of Novel 3-D Nanocomposites of HAp-TiC-h-BN-ZrO2: Enhanced Mechanical Performances and In Vivo Toxicity Study for Biomedical Applications

Due to excellent biocompatibility, bioactivities, and osteoconductivity, hydroxyapatite (HAp) is considered as one of the most suitable biomaterials for numerous biomedical applications. Herein, HAp was fabricated using a bottom-up approach, i.e., a wet chemical method, and its composites with TiC, h-BN, and ZrO2 were fabricated by a solid-state reaction method with enhanced mechanical and biological performances. Structural, surface morphology, and mechanical behavior of the fabricated composites were characterized using various characterization techniques. Furthermore, transmission electron microscopy study revealed a randomly oriented rod-like morphology, with the length and width of these nanorods ranging from 78 to 122 and from 9 to 13 nm. Moreover, the mechanical characterizations of the composite HZBT4 (80HAp-10TiC-5h-BN-5ZrO2) reveal a very high compressive strength (246 MPa), which is comparable to that of the steel (250 MPa), fracture toughness (14.78 MPa m1/2), and Young's modulus (1.02 GPa). In order to check the biocompatibility of the composites, numerous biological tests were also performed on different body organs of healthy adult Sprague-Dawley rats. This study suggests that the composite HZBT4 could not reveal any significant influence on the hematological, serum biochemical, and histopathological parameters. Hence, the fabricated composite can be used for several biological applications, such as bone implants, bone grafting, and bone regeneration.

An osteoinductive surface by adhesive bone morphogenetic protein-2 prepared using the bioorthogonal approach for tight binding of titanium with bone

Inorganic biomaterials are used in various orthopedic and dental implants. Nevertheless, they cause clinical issues such as loosening of implants and patient morbidity. Therefore, inspired by mussel adhesive proteins, we aimed to design an adhesive and dimer-forming highly active bone morphogenetic protein-2 (BMP-2) using bioorthogonal chemistry, in which recombinant DNA technology was combined with enzymatic modifications, to achieve long-term osseointegration with titanium. The prepared BMP-2 exhibited substantially higher binding activity than wild-type BMP-2, while the adhered BMP-2 was more active than soluble BMP-2. Therefore, the adhesive BMP-2 was immobilized onto titanium wires and screws and implanted into rat bones, and long-term osteogenesis was evaluated. Adhesive BMP-2 promoted the mechanical binding of titanium to bones, enabling efficient bone regeneration and effective stabilization of implants. Thus, such adhesive biosignaling proteins can be used in regenerative medicine.

Tissue engineering innovations to enhance osseointegration in immediate dental implant loading: A narrative review

The demand for efficient and accelerated osseointegration in dental implantology has led to the exploration of innovative tissue engineering strategies. Immediate implant loading reduces treatment duration and necessitates robust osseointegration to ensure long-term implant success. This review article discusses the current studies of tissue engineering innovations for enhancing osseointegration in immediate dental implant loading in the recent decade. Keywords "tissue engineering," "osseointegration," "immediate implant loading," and related terms were systematically searched. The review highlights the potential of bioactive materials and growth factor delivery systems in promoting osteogenic activity and accelerating bone regeneration. The in vivo experiment demonstrates significantly improved osseointegration in the experimental group compared to traditional immediate loading techniques, as evidenced by histological analyses and biomechanical assessments. It is possible to revolutionize the treatment outcomes and patient satisfaction in dental implants by integrating bioactive materials and growth factors.

Use of biosilica to improve loading and delivery of bone morphogenic protein 2

The clinical utility of bone morphogenetic protein 2 (BMP2) is limited because of the poor attraction between BMP2 and carriers, resulting in low loading efficiency and initial burst release. Here, the high binding affinity of BMP2 to the biosilica surface was utilized to overcome this limitation. Atomic force microscopy revealed that BMP2 bound nearly 8- and 2-fold more strongly to biosilica-coated hydroxyapatite than to uncoated and plain silica-coated hydroxyapatite, respectively. To achieve controlled release, collagen was introduced between the silica layers on hydroxyapatite, which was optimized by adjusting the collagen concentration and number of layers. The optimal biosilica/collagen formulation induced sustained BMP2 release without compromising loading efficiency. BMP2 combined with the mentioned formulation led to an increase in osteogenesis, as compared to the combination of BMP2 with either biosilica-coated or non-coated hydroxyapatite in vitro. In rat calvarial defect models, the biosilica/collagen-coated hydroxyapatite with 1 μg BMP2 showed 26 % more bone regeneration than the same dose of BMP2-loaded hydroxyapatite and 10.6 % more than hydroxyapatite with 2.5-fold dose of BMP2. Using BMP2 affinity carriers coated with biosilica/collagen allows for more efficacious in situ loading and delivery of BMP2, making them suitable for the clinical application of growth factors through a soaking method.

Biomedical Applications of Titanium Alloys: A Comprehensive Review

Titanium alloys have emerged as the most successful metallic material to ever be applied in the field of biomedical engineering. This comprehensive review covers the history of titanium in medicine, the properties of titanium and its alloys, the production technologies used to produce biomedical implants, and the most common uses for titanium and its alloys, ranging from orthopedic implants to dental prosthetics and cardiovascular devices. At the core of this success lies the combination of machinability, mechanical strength, biocompatibility, and corrosion resistance. This unique combination of useful traits has positioned titanium alloys as an indispensable material for biomedical engineering applications, enabling safer, more durable, and more efficient treatments for patients affected by various kinds of pathologies. This review takes an in-depth journey into the inherent properties that define titanium alloys and which of them are advantageous for biomedical use. It explores their production techniques and the fabrication methodologies that are utilized to machine them into their final shape. The biomedical applications of titanium alloys are then categorized and described in detail, focusing on which specific advantages titanium alloys are present when compared to other materials. This review not only captures the current state of the art, but also explores the future possibilities and limitations of titanium alloys applied in the biomedical field.

Forged to heal: The role of metallic cellular solids in bone tissue engineering

Metallic cellular solids, made of biocompatible alloys like titanium, stainless steel, or cobalt-chromium, have gained attention for their mechanical strength, reliability, and biocompatibility. These three-dimensional structures provide support and aid tissue regeneration in orthopedic implants, cardiovascular stents, and other tissue engineering cellular solids. The design and material chemistry of metallic cellular solids play crucial roles in their performance: factors such as porosity, pore size, and surface roughness influence nutrient transport, cell attachment, and mechanical stability, while their microstructure imparts strength, durability and flexibility. Various techniques, including additive manufacturing and conventional fabrication methods, are utilized for producing metallic biomedical cellular solids, each offering distinct advantages and drawbacks that must be considered for optimal design and manufacturing. The combination of mechanical properties and biocompatibility makes metallic cellular solids superior to their ceramic and polymeric counterparts in most load bearing applications, in particular under cyclic fatigue conditions, and more in general in application that require long term reliability. Although challenges remain, such as reducing the production times and the associated costs or increasing the array of available materials, metallic cellular solids showed excellent long-term reliability, with high survival rates even in long term follow-ups.

Addition of heparin binding sites strongly increases the bone forming capabilities of BMP9 in vivo

Bone Morphogenetic proteins (BMPs) like BMP2 and BMP7 have shown great potential in the treatment of severe bone defects. In recent in vitro studies, BMP9 revealed the highest osteogenic potential compared to other BMPs, possibly due to its unique signaling pathways that differs from other osteogenic BMPs. However, in vivo the bone forming capacity of BMP9-adsorbed scaffolds is not superior to BMP2 or BMP7. In silico analysis of the BMP9 protein sequence revealed that BMP9, in contrast to other osteogenic BMPs such as BMP2, completely lacks so-called heparin binding motifs that enable extracellular matrix (ECM) interactions which in general might be essential for the BMPs' osteogenic function. Therefore, we genetically engineered a new BMP9 variant by adding BMP2-derived heparin binding motifs to the N-terminal segment of BMP9's mature part. The resulting protein (BMP9 HB) showed higher heparin binding affinity than BMP2, similar osteogenic activity in vitro and comparable binding affinities to BMPR-II and ALK1 compared to BMP9. However, remarkable differences were observed when BMP9 HB was adsorbed to collagen scaffolds and implanted subcutaneously in the dorsum of rats, showing a consistent and significant increase in bone volume and density compared to BMP2 and BMP9. Even at 10-fold lower BMP9 HB doses bone tissue formation was observed. This innovative approach of significantly enhancing the osteogenic properties of BMP9 simply by addition of ECM binding motifs, could constitute a valuable replacement to the commonly used BMPs. The possibility to use lower protein doses demonstrates BMP9 HB's high translational potential.

Investigations into the effects of scaffold microstructure on slow-release system with bioactive factors for bone repair

In recent years, bone tissue engineering (BTE) has played an essential role in the repair of bone tissue defects. Although bioactive factors as one component of BTE have great potential to effectively promote cell differentiation and bone regeneration, they are usually not used alone due to their short effective half-lives, high concentrations, etc. The release rate of bioactive factors could be controlled by loading them into scaffolds, and the scaffold microstructure has been shown to significantly influence release rates of bioactive factors. Therefore, this review attempted to investigate how the scaffold microstructure affected the release rate of bioactive factors, in which the variables included pore size, pore shape and porosity. The loading nature and the releasing mechanism of bioactive factors were also summarized. The main conclusions were achieved as follows: i) The pore shapes in the scaffold may have had no apparent effect on the release of bioactive factors but significantly affected mechanical properties of the scaffolds; ii) The pore size of about 400 μm in the scaffold may be more conducive to controlling the release of bioactive factors to promote bone formation; iii) The porosity of scaffolds may be positively correlated with the release rate, and the porosity of 70%-80% may be better to control the release rate. This review indicates that a slow-release system with proper scaffold microstructure control could be a tremendous inspiration for developing new treatment strategies for bone disease. It is anticipated to eventually be developed into clinical applications to tackle treatment-related issues effectively.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Biological Effects of New Titanium Surface Coatings Based on Ionic Liquids and HMGB1: A Cellular and Molecular Characterization in Lewis Rats

High Mobility Group Box 1 (HMGB1) is a redox-sensitive molecule that plays dual roles in tissue healing and inflammation. We previously demonstrated that HMGB1 is stable when anchored by a well-characterized imidazolium-based ionic liquid (IonL), which serves as a delivery vehicle for exogenous HMGB1 to the site of injury and prevents denaturation from surface adherence. However, HMGB1 exists in different isoforms [fully reduced HMGB1 (FR), a recombinant version of FR resistant to oxidation (3S), disulfide HMGB1 (DS), and inactive sulfonyl HMGB1(SO)] that have distinct biological functions in health and disease. Thus, the goal of this study was to evaluate the effects of different recombinant HMGB1 isoforms on the host response using a rat subcutaneous implantation model. A total of 12 male Lewis rats (12-15 weeks) were implanted with titanium discs containing different treatments (n = 3/time point; Ti, Ti-IonL, Ti-IonL-DS, Ti-IonL-FR, and Ti-IonL-3S) and assessed at 2 and 14 days. Histological (H&E and Goldner trichrome staining), immunohistochemistry, and molecular analyses (qPCR) of surrounding implant tissues were employed for analysis of inflammatory cells, HMGB1 receptors, and healing markers. Ti-IonL-DS samples resulted in the thickest capsule formation, increased pro-inflammatory, and decreased anti-inflammatory cells, while Ti-IonL-3S samples demonstrated suitable tissue healing similar to uncoated Ti discs, as well as an upregulation of anti-inflammatory cells at 14 days compared to all other treatments. Thus, results from this study demonstrated that Ti-IonL-3S are safe alternatives for Ti biomaterials. Future studies are necessary to investigate the healing potential of Ti-IonL-3S in osseointegration scenarios.

Exogenous Protein Delivery of Ionic Liquid-Mediated HMGB1 Coating on Titanium Implants

Strategies for modifying titanium (Ti) implant surfaces are becoming increasingly popular to enhance osseointegration during acute and inflammatory healing stages. In this study, two dicationic imidazolium-based ionic liquids (IonLs) containing phenylalanine and methionine anions (IonL-Phe(1,10-bis(3-methylimidazolium-1-yl)decane diphenylalanine) and IonL-Met(1,10-bis(3-methylimidazolium-1-yl)decane dimethionine)) were investigated to stably deliver exogenous proteins on Ti to promote osseointegration. The protein selected for this study is High-Mobility Group Box 1 (HMGB1), which recruits inflammatory and mesenchymal stem cells to the implantation site, contributing to healing. To explore IonL-Ti interactions and HMGB1 stability on the IonL-coated surface, experimental characterization techniques including X-ray photoelectron spectroscopy, scanning electron microscopy, dynamic scanning calorimetry (DSC), and liquid chromatography mass spectrometry (LC-MS) were used along with molecular dynamics (MD) computer simulations to provide a detailed molecular level description. Results show well-structured IonL molecules on the Ti surface that impact protein crystallization and coating morphology. IonL cations and anions were found to bind strongly to oppositely charged residues of the protein. LC-MS/MS reveals that HMGB1 B-box lysine residues bind strongly to the IonLs. Stronger interactions of HMGB1 with Ion-Phe in contrast to IonL-Met results in greater retention capacity of HMGB1 in the IonL-Phe coating. Overall, this study provides evidence that the selected IonLs strongly interact with HMGB1, which can be a potential surface treatment for bone-implantable Ti devices.

BMP2-Mediated Silica Deposition: An Effective Strategy for Bone Mineralization

The combined use of an osteogenic factor, such as bone morphogenetic protein 2 (BMP2), with a bone scaffold was quite functional for the reconstruction of bone defects. Although many studies using BMP2 have been done, there is still a need to develop an efficient way to apply BMP2 in the bone scaffold. Here, we reported an interesting fact that BMP2 has a silica deposition ability in the presence of silicic acid and proposed that such an ability of BMP2 can effectively immobilize and transport itself by a kind of coprecipitation of BMP2 with a silica matrix. The presence of BMP2 in the resulting silica was proved by SEM and EDS and was visualized by FITC-labeled BMP2. The delivery efficacy of BMP2 of silica-entrapped BMP2 on osteoblast differentiation and mineralization using MC3T3 E1 preosteoblast cells was evaluated in vitro. The coprecipitated BMP2 with silica exhibited osteogenesis at a low concentration that was insufficient to give an osteoinductive signal as the free form. Expectedly, the silica-entrapped BMP2 exhibited thermal stability over free BMP2. When applied to bone graft substitution, e.g., hydroxyapatite granules (HA), silica-entrapped BMP 2 laden HA (BMP2@Si/HA) showed sustained BMP2 release, whereas free BMP2 adsorbed HA by a simple dipping method (BMP2/HA) displayed a burst release of BMP2 at an initial time. In the rat critical-size calvarial defect model, BMP2@Si/HA showed better bone regeneration than BMP2/HA by about 10%. The BMP2/silica hybrid deposited on a carrier surface via BMP2-mediated silica precipitation demonstrated an increase in the loading efficiency, a decrease in the burst release of BMP2, and an increase in bone regeneration. Taken together, the coprecipitated BMP2 with a silica matrix has the advantages of not only being able to immobilize BMP2 efficiently without compromising its function but also serving as a stable carrier for BMP2 delivery.

Bio-functionalized titanium surfaces with modified silk fibroin carrying titanium binding motif to enhance the ossific differentiation of MC3T3-E1

Silk fibroin (SF) from Bombyx mori has superior properties as both a textile and a biomaterial, and has been used to functionalize the surfaces of various medical inorganic materials including titanium (Ti). In this study, we endowed SF with reversible binding ability to Ti by embedding a titanium binding motif (minTBP-1 and RKLPDA). Artificial SF proteins were first created by conjugating gene cassettes for SF motif (AGSGAG) and minTBP-1 motif with different ratios, which have been shown to bind reversibly to Ti surfaces in quartz crystal microbalance analyses. Based on these results, the functionalized SF (TiBP-SF) containing the designed peptide [TS[(AGSGAG)₃ AS]₂ RKLPDAS]₈ was prepared from the cocoon of transgenic B. mori, which accelerates the ossific differentiation of MC3T3-E1 cells when coated on titanium substrates. Thus, TiBP-SF presents an alternative for endowing the surfaces of titanium materials with osseointegration functionality, which would allow the exploration of potential applications in the medical field.

Bone morphogenetic protein 2: heterologous expression and potential in bone regeneration

Currently, bone morphogenetic protein 2 (BMP-2) is one of the two osteoinductive growth factors used in medical devices to promote bone formation. Typically, this protein is bought from commercial houses at high rates and in small quantities that are not enough to cover clinical needs. Because of this, it has been proposed that research centers use their own heterologous expression systems to have a constant supply of BMP-2. The aim of this study was to standardize the heterologous expression of BMP-2 and evaluate its osteoinductive activity in vitro. Our procedure for expression and purification was based on recombinant DNA technology using the plasmid pET-28 and IPTG as inductor. After extracting the protein from inclusion bodies, folding it and modifying it via a redox system, we observed via electrophoresis a 26 kDa dimer. We evaluated its osteoinductive activity in myoblastic C2C12 by quantifying enzymatically the activity of alkaline phosphate (ALP) and staining mineralization nodules. ALP activity is proportional to BMP-2 concentration, increasing 90% at 3 µg/mL. These cells form calcium nodules, mineralizing 50% of the area.

Surface Co-presentation of BMP-2 and integrin selective ligands at the nanoscale favors α5β1 integrin-mediated adhesion

Here we present the use of surface nanopatterning of covalently immobilized BMP-2 and integrin selective ligands to determine the specificity of their interactions in regulating cell adhesion and focal adhesion assembly. Gold nanoparticle arrays carrying single BMP-2 dimers are prepared by block-copolymer micellar nanolithography and azide-functionalized integrin ligands (cyclic-RGD peptides or α₅β₁ integrin peptidomimetics) are immobilized on the surrounding polyethylene glycol alkyne by click chemistry. Compared to BMP-2 added to the media, surface immobilized BMP-2 (iBMP-2) favors the spatial segregation of adhesion clusters and enhances focal adhesion (FA) size in cells adhering to α₅β₁ integrin selective ligands. Moreover, iBMP-2 copresented with α₅β₁ integrin ligands induces the recruitment of α_vβ₃ integrins in FAs. When copresented with RGD, iBMP-2 induces the assembly of a higher number of FAs, which are not affected by α₅β₁ integrin blocking. Our dual-functionalized platforms offer the possibility to study the crosstalk between integrins and BMP receptors, and more in general they could be used to address the spatial regulation of growth factors and adhesion receptors crosstalk on biomimetic surfaces.

Development of a facile fluorophosphonate-functionalised titanium surface for potential orthopaedic applications

Background

Aseptic loosening of total joint replacements (TJRs) continues to be the main cause of implant failures. The socioeconomic impact of surgical revisions is hugely significant; in the United Kingdom alone, it is estimated that £137 m is spent annually on revision arthroplasties. Enhancing the longevity of titanium implants will help reduce the incidence and overall cost of failed devices.

Methods

In realising the development of a superior titanium technology, we exploited the natural affinity of titanium for phosphonic acids and developed a facile means of coating the metal with (3S)1-fluoro-3-hydroxy-4-(oleoyloxy)butyl-1-phosphonate (FHBP), a phosphatase-resistant analogue of lysophosphatidic acid (LPA). Importantly LPA and selected LPA analogues like FHBP synergistically cooperate with calcitriol to promote human osteoblast formation and maturation.

Results

Herein, we provide evidence that simply immersing titanium in aqueous solutions of FHBP afforded a surface that was superior to unmodified metal at enhancing osteoblast maturation. Importantly, FHBP-functionalised titanium remained stable to 2 years of ambient storage, resisted ∼35 kGy of gamma irradiation and survived implantation into a bone substitute (Sawbone™) and irrigation.

Conclusion

The facile step we have taken to modify titanium and the robustness of the final surface finish are appealing properties that are likely to attract the attention of implant manufacturers in the future.

The translational potential of this article

We have generated a functionalised titanium (Ti) surface by simply immersing Ti in aqueous solutions of a bioactive lipid. As a facile procedure it will have greater appeal to implant manufacturers compared to onerous and costly developmental processes.

A multifaceted biomimetic interface to improve the longevity of orthopedic implants

The rise of additive manufacturing has provided a paradigm shift in the fabrication of precise, patient-specific implants that replicate the physical properties of native bone. However, eliciting an optimal biological response from such materials for rapid bone integration remains a challenge. Here we propose for the first time a one-step ion-assisted plasma polymerization process to create bio-functional 3D printed titanium (Ti) implants that offer rapid bone integration. Using selective laser melting, porous Ti implants with enhanced bone-mimicking mechanical properties were fabricated. The implants were functionalized uniformly with a highly reactive, radical-rich polymeric coating generated using a unique combination of plasma polymerization and plasma immersion ion implantation. We demonstrated the performance of such activated Ti implants with a focus on the coating's homogeneity, stability, and biological functionality. It was shown that the optimized coating was highly robust and possessed superb physico-chemical stability in a corrosive physiological solution. The plasma activated coating was cytocompatible and non-immunogenic; and through its high reactivity, it allowed for easy, one-step covalent immobilization of functional biomolecules in the absence of solvents or chemicals. The activated Ti implants bio-functionalized with bone morphogenetic protein 2 (BMP-2) showed a reduced protein desorption and a more sustained osteoblast response both in vitro and in vivo compared to implants modified through conventional physisorption of BMP-2. The versatile new approach presented here will enable the development of bio-functionalized additively manufactured implants that are patient-specific and offer improved integration with host tissue. STATEMENT OF SIGNIFICANCE: Additive manufacturing has revolutionized the fabrication of patient-specific orthopedic implants. Although such 3D printed implants can show desirable mechanical and mass transport properties, they often require surface bio-functionalities to enable control over the biological response. Surface covalent immobilization of bioactive molecules is a viable approach to achieve this. Here we report the development of additively manufactured titanium implants that precisely replicate the physical properties of native bone and are bio-functionalized in a simple, reagent-free step. Our results show that covalent attachment of bone-related growth factors through ion-assisted plasma polymerized interlayers circumvents their desorption in physiological solution and significantly improves the bone induction by the implants both in vitro and in vivo.

The topography and proliferative activity of cells immunoreactive to various growth factors in rat femoral bone tissues after experimental fracture and implantation of titanium implants with bioactive biodegradable coatings

BACKGROUND

Biodegradable implant coatings promote proliferation and expression of BMP-2, VEGF, and TGF-β2 genes and enhance BMP-2, VEGF, and TGF-β2 regulatory effects at different stages of reparative osteogenesis.

OBJECTIVE

To study the topography and ratio of PCNA-, VEGF-, BMP-2-, and TGF-β2-immunoreactive cells in rat femoral bone after closed fracture and implantation of titanium implants with biodegradable calcium phosphate and hydroxyapatite coatings.

METHODS

Standard titanium implant screws and similar implants with bioactive coatings were used. A total of 18 rats were randomly divided into three groups, two experimental and a control one. The rats in the first experimental group were implanted with implants without specific coating, while those in the second group, with implants with specific coatings. The control rats were subjected to the same fracture as the experimental ones without subsequent implantation. On days 7, 14, and 30 of experiment, the rats were sampled for histological examination. Histological sections were prepared and processed for PCNA, BMP-2, VEGF, and TGF-β2 immunoreactivity.

RESULTS

In the regeneration zone, PCNA-immunoreactive cells substantially outnumbered other immunoreactive cell types. During the first two weeks after fracture, in the immediate vicinity of implant surface, the rate of VEGF production increased in osteoblast subpopulations and level of TGF-32 immunoreactivity decreased in chondroblasts. The level of TGF-32 was maximum on day 30 of experiment. BMP-2-immunoreactive osteocytes were found in the zone of external general plates. They accumulated at implants with calcium phosphate coating. Their number gradually increased by day 30 of experiment.

CONCLUSIONS

The present data suggest that biodegradable implant coatings promote proliferation and expression of BMP-2, VEGF, and TGF-β2 genes and enhance BMP-2, VEGF, and TGF-β2 regulatory effects at different stages of reparative osteogenesis.

Biomaterial-assisted local and systemic delivery of bioactive agents for bone repair

Although bone tissues possess an intrinsic capacity for repair, there are cases where bone healing is either impaired or insufficient, such as fracture non-union, osteoporosis, osteomyelitis, and cancers. In these cases, treatments like surgical interventions are used, either alone or in combination with bioactive agents, to promote tissue repair and manage associated clinical complications. Improving the efficacy of bioactive agents often requires carriers, with biomaterials being a pivotal player. In this review, we discuss the role of biomaterials in realizing the local and systemic delivery of biomolecules to the bone tissue. The versatility of biomaterials enables design of carriers with the desired loading efficiency, release profile, and on-demand delivery. Besides local administration, systemic administration of drugs is necessary to combat diseases like osteoporosis, warranting bone-targeting drug delivery systems. Thus, chemical moieties with the affinity towards bone extracellular matrix components like apatite minerals have been widely utilized to create bone-targeting carriers with better biodistribution, which cannot be achieved by the drugs alone. Bone-targeting carriers combined with the desired drugs or bioactive agents have been extensively investigated to enhance bone healing while minimizing off-target effects. Herein, these advancements in the field have been systematically reviewed. STATEMENT OF SIGNIFICANCE: Drug delivery is imperative when surgical interventions are not sufficient to address various bone diseases/defects. Biomaterial-assisted delivery systems have been designed to provide drugs with the desired loading efficiency, sustained release, and on-demand delivery to enhance bone healing. By surveying recent advances in the field, this review outlines the design of biomaterials as carriers for the local and systemic delivery of bioactive agents to the bone tissue. Particularly, biomaterials that bear chemical moieties with affinity to bone are attractive, as they can present the desired bioactive agents to the bone tissue efficiently and thus enhance the drug efficacy for bone repair.

Modeling the Cooperative Adsorption of Solid-Binding Proteins on Silica: Molecular Insights from Surface Plasmon Resonance Measurements

Combinatorially selected solid-binding peptides (SBPs) provide a versatile route for synthesizing advanced materials and devices, especially when they are installed within structurally or functionally useful protein scaffolds. However, their promise has not been fully realized because we lack a predictive understanding of SBP-material interactions. Thermodynamic and kinetic binding parameters obtained by fitting quartz crystal microbalance and surface plasmon resonance (SPR) data with the Langmuir model whose assumptions are rarely satisfied provide limited information on underpinning molecular interactions. Using SPR, we show here that a technologically useful SBP called Car9 confers proteins to which is fused a sigmoidal adsorption behavior modulated by partner identity, quaternary structure, and ionic strength. We develop a two-step cooperative model that accurately captures the kinetics of silica binding and provides insights into how SBP-SBP interactions, fused scaffold, and solution conditions modulate adsorption. Because cooperative binding can be converted to Langmuir adhesion by mutagenesis, our approach offers a path to identify and to better understand and design practically useful SBPs.

Biological Activation of Bioinert Medical High-Performance Oxide Ceramics by Hydrolytically Stable Immobilization of c(RGDyK) and BMP-2

High-performance oxide ceramics (HPOC), such as alumina, zirconia, and dispersion ceramics thereof are successfully used as articulating components in joint arthroplasty. HPOC exhibit excellent wear resistance, high strength, and cytocompatible behavior; however, they lack sufficient tissue bonding capability. Thus, they are primarily deployed as low-wear-bearing articulating components in arthroplasty without direct tissue contact, although proper cellular stimulation would hold significant advantages. Here, we describe a surface modification approach for HPOC, enabling hydrolytically stable interfacial binding of c(RGDyK) peptides and BMP-2 proteins to significantly improve the adhesion and osteogenic differentiation of human mesenchymal stem cells (hMSCs) without altering the mechanical properties of the underlying ceramic substrates. Analyses of cellular attachment of murine fibroblasts (L929), human alveolar basal epithelial cells (A549), hMSCs on c(RGDyK), and osteogenic differentiation of hMSCs on BMP-2-coated interfaces demonstrate significant improvements of cell adhesion and an enhanced osteogenic differentiation potential in vitro. The presented approach provides a strategy for the development of a novel class of bioactive HPOC with osseointegration potential that could lead to novel therapeutic solutions for biomedical applications. Furthermore, the developed surface modification is designed in a way to be readily translated to other medically employed bioinert materials in the future.

The effects of surface bioactivity and sustained-release of genistein from a mesoporous magnesium-calcium-silicate/PK composite stimulating cell responses in vitro, and promoting osteogenesis and enhancing osseointegration in vivo

The surface of a mesoporous magnesium-calcium-silicate (m-MCS)/polyetheretherketone (PK) composite (MPC) was modified by sand blasting, and genistein (GS) was loaded inside the nanopores of the m-MCS on the modified MPC (MPCm) surface. The results showed that compared with MPC, the surface roughness and hydrophilcity of MPCm obviously improved with more m-MCS exposed on its surface. Moreover, no obvious differences in surface roughness and hydrophilcity were found between MPCm and GS loaded MPCm (MPCm-Ge), and both of them possessed an improved apatite mineralization ability in simulated body fluid solution (SBF) compared with MPC, indicating excellent surface bioactivity. Moreover, the MPCm obviously stimulated the adhesion, proliferation, differentiation and gene expressions of MC3T3-E1 cells compared with MPC, and the sustained-release of GS from the MPCm-Ge surface further significantly promoted the cell proliferation, differentiation and gene expression. According to the Micro-CT, histological and SEM analysis, the results demonstrated that the MPCm obviously improved osteogenesis and enhanced osseointegration in vivo compared with MPC, and the release of GS from the MPCm-Ge surface further significantly improved osteogenesis and enhanced osseointegration. In summary, the significant promotion of cell responses in vitro, and the improvements of osteogenesis and the enhancement of osseointegration in vivo were attributed to the effects of surface bioactivity and GS sustained-release from the MPCm-Ge surface. Therefore, MPCm-Ge would be a potential candidate for orthopedic and dental applications.

Utilizing DNA for functionalization of biomaterial surfaces

DNA sequences are widely used for gene transfer into cells including a number of substrate surface-based supporting systems, but due to its singular structure property profile, DNA also offers multiple options for noncanonical applications. The special case of using DNA and oligodeoxyribonucleotide (ODN) structures for surface functionalization of biomedical implants is summarized here with the major focus on (a) immobilization or anchoring of nucleic acid structures on substrate surfaces, (b) incorporation of biologically active molecules (BAM) into such systems, and (c) biological characteristics of the resulting surfaces in vitro and in vivo. Sterilizations issues, important for potential clinical applications, are also considered.

Immobilization of a carbon nanomaterial-based localized drug-release system using a bispecific material-binding peptide

Introduction

Inorganic materials are widely used in medical devices, such as artificial hearts, vessels, and joints, in stents, and as nanocarriers for drug-delivery systems. Carbon nanomaterials are of particular interest due to their biological inertness and their capability to accommodate molecules. Several attempts have been proposed, in which carbon nanomaterials are used as nanocarriers for the systemic delivery of drugs.

Materials and methods

We developed a drug-delivery system in which oxidized single-walled carbon nanohorns (oxSWNHs) were immobilized on a titanium (Ti) surface using material-binding peptides to enable localized drug delivery. For this purpose, we utilized a bispecific peptidic aptamer comprising a core sequence of a Ti-binding peptide and a SWNH-binding peptide to immobilize oxSWNHs on Ti.

Results

Scanning electron microscopy was used to confirm the presence of oxSWNHs adsorbed onto the Ti surface, and a quartz crystal microbalance was used to evaluate the binding process during oxSWNH adsorption. The oxSWNHs-ornamented Ti substrate was nontoxic to cells and released biologically active dexamethasone over a sustained period.

Conclusion

This oxSWNHs-immobilized system can be used to modify the surface of Ti in implants and be loaded with drugs that stimulate osteogenesis and bone regeneration.

Dynamics at a Peptide-TiO2 Anatase (101) Interface

The interface between biological matter and inorganic materials is a widely investigated research topic due to possible applications in biomedicine and nanotechnology. In this context, the molecular level adsorption mechanism that drives specific recognition between small peptide sequences and inorganic surfaces represents an important topic likely to provide much information useful for designing bioderived materials. Here, we investigate the dynamics at the interface between a Ti-binding peptide sequence (AMRKLPDAPGMHC) and a TiO₂ anatase surface by using molecular dynamics (MD) simulations. In the simulations the adsorption mechanism is characterized by diffusion of the peptide from the bulk water phase toward the TiO₂ surface, followed by the anchoring of the peptide to the surface. The anchoring is mediated by the interfacial water layers by means of the charged groups of the side chains of the peptide. The peptide samples anchored and dissociated states from the surface and its conformation is not affected by the surface when anchored.

Peptide-functionalized poly[oligo(ethylene glycol) methacrylate] brushes on dopamine-coated stainless steel for controlled cell adhesion

The modification of the surface of surgical implants with cell adhesion ligands has emerged as a promising approach to improve biomaterial-host interactions. However, these approaches are limited by the non-specific adsorption of biomolecules and uncontrolled presentation of desired bioactive ligands on implant surfaces. This leads to sub-optimal integration with host tissue and delayed healing. Here we present a strategy to grow non-fouling polymer brushes of oligo(ethylene glycol) methacrylate by atom transfer radical polymerization from dopamine-functionalized clinical grade 316 stainless steel. These brushes prevent non-specific adsorption of proteins and attachment of cells. Subsequently, the brushes can be modified with covalently tethered adhesive peptides that provide controlled cell adhesion. This approach may therefore have broad application to promote bone growth and improvements in osseointegration.

STATEMENT OF SIGNIFICANCE

Stainless steel (SS) implants are widely used clinically for orthopaedic, spinal, dental and cardiovascular applications. However, non-specific adsorption of biomolecules onto implant surfaces results in sub-optimal integration with host tissue. To allow controlled cell-SS interactions, we have developed a strategy to grow non-fouling polymer brushes that prevent protein adsorption and cell adhesion and can be subsequently functionalized with adhesive peptides to direct cell adhesion and signaling. This approach has broad application to improve osseointegration onto stainless steel implants in bone repair.

Synergistic effects of fibronectin and bone morphogenetic protein on the bioactivity of titanium metal

To improve the biological properties of bioactive titanium metal, recombinant human bone morphogenetic protein 2(rhBMP-2) and fibronectin (Fn) were adsorbed on its surface solely or contiguously to modify the anodic oxidized titanium (AO-Ti), acid-alkali-treated titanium (AA-Ti), and polished titanium (P-Ti). It is found that the different bioactive titanium surface structures had great influence on protein adsorption. The adsorption amounts of BMP adsorbed solely and Fn/BMP adsorbed contiguously were AA-Ti > P-Ti > AO-Ti, and that for Fn adsorbed solely was AA-Ti ≈ P-Ti > AO-Ti. The conformation of proteins was changed remarkably after the adsorption. For BMP, the α-helix decreased on AA-Ti and stabilized on P-Ti and AO-Ti. For Fn, the β-sheet on PT-Ti and AA-Ti increased significantly. For Fn/BMP, the percentage of β-sheet on AA-Ti increased, and that of α-helix on all samples was stable. MSCs showed greater adhesion and spreading on Fn/BMP groups. MTT and Elisa tests showed that the synergistic effects of proteins made the cells proliferate and differentiate faster. It indicated both the surface structure and the synergistic effects of proteins could influence the biological properties of titanium metals. It provides research foundation for improving the biological properties of bioactive titanium metals by simultaneous application of several proteins. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2485-2498, 2017.

Photoluminescent polyphosphazene nanoparticles for in situ simvastatin delivery for improving the osteocompatibility of BMSCs

Photoluminescent prodrug nanoparticles for BMSCs’ endocytosis to improve osteogenesis via in situ simvastatin delivery resulting from polyphosphazene hydrolysis.

Facilitated receptor-recognition and enhanced bioactivity of bone morphogenetic protein-2 on magnesium-substituted hydroxyapatite surface

Biomaterial surface functionalized with bone morphogenetic protein-2 (BMP-2) is a promising approach to fabricating successful orthopedic implants/scaffolds. However, the bioactivity of BMP-2 on material surfaces is still far from satisfactory and the mechanism of related protein-surface interaction remains elusive. Based on the most widely used bone-implants/scaffolds material, hydroxyapatite (HAP), we developed a matrix of magnesium-substituted HAP (Mg-HAP, 2.2 at% substitution) to address these issues. Further, we investigated the adsorption dynamics, BMPRs-recruitment, and bioactivity of recombinant human BMP-2 (rhBMP-2) on the HAP and Mg-HAP surfaces. To elucidate the mechanism, molecular dynamic simulations were performed to calculate the preferred orientations, conformation changes, and cysteine-knot stabilities of adsorbed BMP-2 molecules. The results showed that rhBMP-2 on the Mg-HAP surface exhibited greater bioactivity, evidenced by more facilitated BMPRs-recognition and higher ALP activity than on the HAP surface. Moreover, molecular simulations indicated that BMP-2 favoured distinct side-on orientations on the HAP and Mg-HAP surfaces. Intriguingly, BMP-2 on the Mg-HAP surface largely preserved the active protein structure evidenced by more stable cysteine-knots than on the HAP surface. These findings explicitly clarify the mechanism of BMP-2-HAP/Mg-HAP interactions and highlight the promising application of Mg-HAP/BMP-2 matrixes in bone regeneration implants/scaffolds.

Regulating the osteogenic function of rhBMP 2 by different titanium surface properties

Bone morphogenetic protein 2 (BMP-2) is important for regulating the osteogenic differentiation of mesenchymal stem cells and the response of bone tissue. It adsorbs on the surface of biomedical implants immediately and plays a role of mediator between the materials surfaces and the host cells. Studies usually connect the material surface properties and the new bone formation directly. However, interaction between the adsorbed BMP-2 on the implant surface and the cells in the tissue is the key to explaining the osteogenic properties of the material. So, in this article, we investigated the conformational and functional changes induced by the surface modified titanium metals. We found that the α-helix and β-sheet structure of rhBMP-2 can be well maintained on the anodic oxidation treated titanium surface. The osteogenic function of rhBMP-2 can sustain for a relatively long time even though there is less amount adhere to the surface compared with that on the acid alkali treated titanium. Surface properties, especially the morphology enable a larger amount of rhBMP-2 to adsorb to the surface of the acid alkali treated titanium, but the conformation of the protein is severely influenced. The percentage of α-helix structure is also significantly decreased so that the efficacy of rhBMP-2 is only maintained in the early time. This study indicated that different surface modification of the surface could regulate the structure of rhBMP-2 and then further influence its osteogenic function. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1882-1893, 2016.

Effects of Osseointegration by Bone Morphogenetic Protein-2 on Titanium Implants In Vitro and In Vivo

This study designed a biomimetic implant for reducing healing time and achieving early osseointegration to create an active surface. Bone morphogenetic protein-2 (BMP-2) is a strong regulator protein in osteogenic pathways. Due to hardly maintaining BMP-2 biological function and specificity, BMP-2 efficient delivery on implant surfaces is the main challenge for the clinic application. In this study, a novel method for synthesizing functionalized silane film for superior modification with BMP-2 on titanium surfaces is proposed. Three groups were compared with and without BMP-2 on modified titanium surfaces in vitro and in vivo: mechanical grinding; electrochemical modification through potentiostatic anodization (ECH); and sandblasting, alkali heating, and etching (SMART). Cell tests indicated that the ECH and SMART groups with BMP-2 markedly promoted D1 cell activity and differentiation compared with the groups without BMP-2. Moreover, the SMART group with a BMP-2 surface markedly promoted early alkaline phosphatase expression in the D1 cells compared with the other surface groups. Compared with these groups in vivo, SMART silaning with BMP-2 showed superior bone quality and created contact areas between implant and surrounding bones. The SMART group with BMP-2 could promote cell mineralization in vitro and osseointegration in vivo, indicating potential clinical use.

Effect of sustained release of rhBMP-2 from dried and wet hyaluronic acid hydrogel carriers compared with direct dip coating of rhBMP-2 on peri-implant osteogenesis of dental implants in canine mandibles

Hyaluronic acid (HA) hydrogel has been used as a carrier of recombinant human bone morphogenetic protein (rhBMP)-2 for sustained delivery. To enhance peri-implant osteogenesis, a dried coating of rhBMP-2 HA hydrogel (BMP-HAH) on dental implants was designed; this approach provides the advantage of omitting in situ preparation of wet HA hydrogel. Sustained release of rhBMP-2 was more efficient for dried hydrogel over wet hydrogel. For both types, the released rhBMP-2 consistently led to enhanced alkaline phosphatase activity and osterix expression in human mesenchymal stromal cells. Histomorphometric analysis 4 weeks after placement of a dental implant in canine mandibles showed that the dried coating of BMP-HAH (10 μg/ml, n = 6) resulted in a significantly greater bone area (BA) than the wet BMP-HAH (10 μg/ml, n = 6) (p = 0.006) and implants without any coating (n = 6) (p = 0.022), while simple dip coating with rhBMP-2 (10 μg/ml, n = 6) resulted in significantly greater BA than the other three groups (p < 0.0005). Bone-to-implant contact (BIC) was significantly different only between the dried and wet coating of BMP-HAH (p = 0.014). Our results suggest that a simple dip coating of rhBMP-2 is more effective for increased peri-implant osteogenesis compared to a coating of BMP-HAH with sustained release.

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.

Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair

Bone tissue has a remarkable ability to regenerate and heal itself. However, large bone defects and complex fractures still present a significant challenge to the medical community. Current treatments center on metal implants for structural and mechanical support and auto- or allo-grafts to substitute long bone defects. Metal implants are associated with several complications such as implant loosening and infections. Bone grafts suffer from donor site morbidity, reduced bioactivity, and risk of pathogen transmission. Surgical implants can be modified to provide vital biological cues, growth factors and cells in order to improve osseointegration and repair of bone defects. Here we review strategies and technologies to engineer metal surfaces to promote osseointegration with the host tissue. We also discuss strategies for modifying implants for cell adhesion and bone growth via integrin signaling and growth factor and cytokine delivery for bone defect repair.

Tailoring biomaterial surface properties to modulate host-implant interactions: implication in cardiovascular and bone therapy

Host body response to a foreign medical device plays a critical role in defining its fate post implantation. It is thus important to control host-material interactions by designing innovative implant surfaces. In the recent years, biochemical and topographical features have been explored as main target to produce this new type of bioinert or bioresponsive implants. The review discusses specific biofunctional materials and strategies to achieve a precise control over implant surface properties and presents possible solutions to develop next generation of implants, particularly in the fields of bone and cardiovascular therapy.

Bridging Adhesion of a Protein onto an Inorganic Surface Using Self-Assembled Dual-Functionalized Spheres

For the bridging adhesion of different classes of materials in their intact functional states, the adhesion of biomolecules onto inorganic surfaces is a necessity. A new molecular design strategy for bridging adhesion was demonstrated by the introduction of two independent recognition groups on the periphery of spherical complexes self-assembled from metal ions (M) and bidentate ligands (L). These dual-functionalized M12L24 spheres were quantitatively synthesized in one step from two ligands, bearing either a biotin for streptavidin recognition or a titania-binding aptamer, and Pd(II) ions. The selective recognition of titania surfaces was achieved by ligands with hexapeptide aptamers (Arg-Lys-Leu-Pro-Asp-Ala: minTBP-1), whose fixation ability was enhanced by the accumulation effect on the surface of the M12L24 spheres. These well-defined spherical structures can be specifically tailored to promote interactions with both titania and streptavidin simultaneously without detrimentally affecting either recognition motif. The irreversible immobilization of the spheres onto titania was revealed quantitatively by quartz crystal microbalance measurements, and the adhesion of streptavidin to the titania surface mediated by the biotin surrounding the spheres was visually demonstrated by lithographic patterning experiments.

Self-oriented immobilization of DNA polymerase tagged by titanium-binding peptide motif

We developed a titanium-binding-peptide-1 (TBP-1)-tagged DNA polymerase, for self-oriented immobilization onto a titanium oxide (TiO2) substrate. The enzymatic function of a polymerase immobilized on a solid state device is strongly dependent on the orientation of the enzyme. The TBP-tagged DNA polymerase, which was derived from a hyperthermophilic archaeon, was designed to incorporate the RKLPDA peptide at the N-terminus, and synthesized by translation processes in Escherichia coli (E. coli). The specific binding of the TBP-tagged DNA polymerase onto a TiO2 substrate was clearly monitored by surface plasmon resonance spectroscopy (SPR) and by surface potential detection with an extended-gate field effect transistor (FET). In the SPR analyses, constant quantities of the DNA polymerase were stably immobilized on the titanium substrate under flow conditions, regardless of the concentration of the DNA polymerase, and could be completely removed by a 4 M MgCl2 wash after measurement. The FET signal showed the contribution of the molecular charge in the TBP motif to the binding with TiO2. In addition, the TBP-tagged DNA polymerase-tethered TiO2 gate electrode enabled the effective detection of the positive charges of hydrogen ions produced by the DNA extension reaction, according to the FET principle. Therefore, the self-oriented immobilization platform based on the motif-inserted enzyme is suitable for the quick and stable immobilization of functional enzymes on biosensing devices.

Peptide-induced affinity binding of carbonic anhydrase to carbon nanotubes

Although affinity binding between short chain peptides and carbon nanotube (CNT) has been reported, little is known for the study of proteins with CNT recognition and specific binding capabilities. Herein, carbonic anhydrase (CA) was functionalized via protein fusion with a single-walled carbon nanotube (SWNTs)-binding peptide, thereby forming a bioactive protein with high affinity binding capability. TEM and AFM analyses showed that the fusion CA could firmly coat to SWNTs with a surface coverage over 51%, while the enzyme maintained its catalytic activity. Structural analysis revealed that slight conformation changes were induced as a result of the fusion; however, the affinity binding of CA to the hydrophobic surface of SWNTs restored the native structure of the protein, with the conformation of the SWNT-bound CA largely resembling that of the native parent enzyme. Interfacial interactions between the fusion CA and SWNT were further investigated with Raman spectrometry and microscopic analysis. The results suggested that such peptide-induced CNT-protein binding allows the development of bioactive hybrid materials with the native structures of the protein moieties largely undisrupted.

Investigation of the peptide adsorption on ZrO2, TiZr, and TiO2 surfaces as a method for surface modification

Specific surface binding peptides offer a versatile and interesting possibility for the development of biocompatible implant materials. Therefore, eight peptide sequences were examined in regard to their adsorption on zirconium oxide (ZrO2), titanium zircon (TiZr), and titanium (c.p. Ti). Surface plasmon resonance (SPR) measurements were performed on Ti coated sensor chips to determine the kinetics of the interactions and kinetic rate constants (kon, koff, KD, and Rmax). We also investigated the interactions which are present in our system. Electrostatic and coordinative interactions were found to play a major role in the adsorption process. Four of the eight examined peptide sequences showed a significant adsorption on all investigated materials. Moreover, the two peptides with the highest adsorption could be quantified (up to 370 pmol/cm(2)). For potential biomaterials applications, we proved the stability of the adsorption of selected peptides in cell culture media, under competition with proteins and at body temperature (37 °C), and their biocompatibility via their effects on the adhesion and proliferation of human mesenchymal stem cells (hMSCs). The results qualify the peptides as anchor peptides for the biofunctionalization of implants.

Non-mulberry silk fibroin influence osteogenesis and osteoblast-macrophage cross talk on titanium based surface

The titanium and its alloys are used as orthopedic dental implants due to their mechanical and bio-inert properties. The bare metal implants are not the ultimate answer for better osteogenesis and implant integration. Physical and chemical modifications are carried out to achieve the goal of improved adhesion and differentiation of the osteoblast. In this work, the silk fibroins from both mulberry and non-mulberry sources are used for surface modification. Silk fibroins are immobilized on titanium surface to facilitate the initial cell adhesion followed by improved cell spreading and better mineralization in order to achieve enhanced osseointegration. The immunological responses along with the effect of cytokines on osteoblast adhesion and function are investigated. The non-mulberry fibroin performs better in the context of the cell adherence and differentiation, which lead to better mineralization. The results indicate that the silk fibroin from non-mulberry source can be used for better osteogenesis on orthopedic implants.