In vitro evaluation of a multi-layer radial-flow bioreactor based on galactosylated chitosan nanofiber scaffolds

Development and characterization of Polycaprolactone/chitosan-based scaffolds for tissue engineering of various organs: A review

Research in creating 3D structures mirroring the extracellular matrix (ECM) with accurate environmental cues holds paramount significance in biological applications.Biomaterials that replicate ECM properties-mechanical, physicochemical, and biological-emerge as pivotal tools in mimicking ECM behavior.Incorporating synthetic and natural biomaterials is widely used to produce scaffolds suitable for the intended organs.Polycaprolactone (PCL), a synthetic biomaterial, boasts commendable mechanical properties, albeit with relatively modest biological attributes due to its hydrophobic nature.Chitosan (CTS) exhibits strong biological traits but lacks mechanical resilience for complex tissue regeneration.Notably, both PCL and CTS have demonstrated their application in tissue engineering for diverse types of tissues.Their combination across varying PCL:CTS ratios has increased the likelihood of fabricating scaffolds to address defects in sturdy and pliable tissues.This comprehensive analysis aspires to accentuate their distinct attributes within tissue engineering across different organs.The central focus resides in the role of PCL:CTS-based scaffolds, elucidating their contribution to the evolution of advanced functional 3D frameworks tailored for tissue engineering across diverse organs.Moreover, this discourse delves into the considerations pertinent to each organ.

Stem Cell-Based Strategies: The Future Direction of Bioartificial Liver Development

Acute liver failure (ALF) results from severe liver damage or end-stage liver disease. It is extremely fatal and causes serious health and economic burdens worldwide. Once ALF occurs, liver transplantation (LT) is the only definitive and recommended treatment; however, LT is limited by the scarcity of liver grafts. Consequently, the clinical use of bioartificial liver (BAL) has been proposed as a treatment strategy for ALF. Human primary hepatocytes are an ideal cell source for these methods. However, their high demand and superior viability prevent their widespread use. Hence, finding alternatives that meet the seed cell quality and quantity requirements is imperative. Stem cells with self-renewing, immunogenic, and differentiative capacities are potential cell sources. MSCs and its secretomes encompass a spectrum of beneficial properties, such as anti-inflammatory, immunomodulatory, anti-ROS (reactive oxygen species), anti-apoptotic, pro-metabolomic, anti-fibrogenesis, and pro-regenerative attributes. This review focused on the recent status and future directions of stem cell-based strategies in BAL for ALF. Additionally, we discussed the opportunities and challenges associated with promoting such strategies for clinical applications.

Bioartificial livers: a review of their design and manufacture

Acute liver failure (ALF) is a rapidly progressive disease with high morbidity and mortality rates. Liver transplantation and artificial liver support systems, such as artificial livers (ALs) and bioartificial livers (BALs), are the two major therapies for ALF. Compared to ALs, BALs are composed of functional hepatocytes that provide essential liver functions, including detoxification, metabolite synthesis, and biotransformation. Furthermore, BALs can potentially provide effective support as a form of bridging therapy to liver transplantation or spontaneous recovery for patients with ALF. In this review, we systematically discussed the currently available state-of-the-art designs and manufacturing processes for BAL support systems. Specifically, we classified the cell sources and bioreactors that are applied in BALs, highlighted the advanced technologies of hepatocyte culturing and bioreactor fabrication, and discussed the current challenges and future trends in developing next generation BALs for large scale clinical applications.

Fabrication and in vitro evaluation of a packed-bed bioreactor based on an optimum two-stage culture strategy

A packed-bed (PB) bioreactor for bioartificial liver (BAL) was fabricated based on an optimum two-stage culture strategy and evaluated in vitro in this research. Human induced hepatocytes (hiHeps) were first expanded using Cytodex 3 microcarriers and the choice of microcarrier concentration and fetal bovine serum (FBS) content was optimized. Then, the cells expanded under the optimum expansion condition were perfused into a perfusion system containing Fibra-Cel (FC) disks to fabricate a PB bioreactor. Operating parameters including flow rate and seeding density for perfusion culture were optimized, respectively. Results indicated that during suspension culture, rapid cell proliferation and favorable amino acid metabolism were achieved at 3 mg/mL microcarriers combined with 1% FBS. While for the perfusion culture, the most effective flow rate and seeding density were 2 mL/min and 1 × 10⁶ cells/mL, respectively. Under this optimum perfusion condition, hiHeps showed good proliferation ability, high viability, homogeneous distribution, high metabolism activities and efficient albumin secretion as well as high liver-specific genes expression. Therefore, the two-stage culture strategy based on operating parameters optimization provides a new method for the development of PB bioreactors.

Organ-On-A-Chip Platforms: A Convergence of Advanced Materials, Cells, and Microscale Technologies

Significant advances in biomaterials, stem cell biology, and microscale technologies have enabled the fabrication of biologically relevant tissues and organs. Such tissues and organs, referred to as organ-on-a-chip (OOC) platforms, have emerged as a powerful tool in tissue analysis and disease modeling for biological and pharmacological applications. A variety of biomaterials are used in tissue fabrication providing multiple biological, structural, and mechanical cues in the regulation of cell behavior and tissue morphogenesis. Cells derived from humans enable the fabrication of personalized OOC platforms. Microscale technologies are specifically helpful in providing physiological microenvironments for tissues and organs. In this review, biomaterials, cells, and microscale technologies are described as essential components to construct OOC platforms. The latest developments in OOC platforms (e.g., liver, skeletal muscle, cardiac, cancer, lung, skin, bone, and brain) are then discussed as functional tools in simulating human physiology and metabolism. Future perspectives and major challenges in the development of OOC platforms toward accelerating clinical studies of drug discovery are finally highlighted.

Effect of amine content and chemistry on long-term, three-dimensional hepatocyte spheroid culture atop aminated elastin-like polypeptide coatings

Culture conditions that induce hepatic spheroidal aggregates sustain liver cells with metabolism that mimics in vivo hepatocytes. Here we present an array of elastin-like polypeptide conjugate coating materials (Aminated-ELPs) that are biocompatible, have spheroid-forming capacity, can be coated atop traditional culture surfaces, and maintain structural integrity while ensuring adherence of spheroids over long culture period. The Aminated-ELPs were synthesized either by direct conjugation of ELP and various polyelectrolytes or by conjugating both ELP and various small electrolytes to the reactive polymer poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA). Spheroid morphology, cellular metabolic function, and liver-specific gene expression over the long-term, 20-day culture period were assessed through optical microscopy, measurement of total protein content and albumin and urea production, and quantitative real-time (qRT) PCR. We found that the amine content of the Aminated-ELP coatings dictated the initial hepatocyte attachment, but not the subsequent hepatocyte spheroid formation and their continued attachment. A lower amine content was generally found to sustain higher albumin production by the spheroids. Out of the 19 Aminated-ELP coatings tested, we found that the lysine-containing substrates comprising ELP-polylysine or ELP-PVDMA-butanediamine proved to consistently culture productive spheroidal hepatocytes. We suggest that the incorporation of lysine functional groups in Aminated-ELP rendered more biocompatible surfaces, increasing spheroid attachment and leading to increased liver-specific function. Taken together, the Aminated-ELP array presented here has the potential to create in vitro hepatocyte culture models that mimic in vivo liver functionality and thus, lead to better understanding of liver pathophysiology and superior screening methods for drug efficacy and toxicity. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 377-388, 2017.

Organ-on-a-Chip Systems: Microengineering to Biomimic Living Systems

"Organ-on-a-chip" systems integrate microengineering, microfluidic technologies, and biomimetic principles to create key aspects of living organs faithfully, including critical microarchitecture, spatiotemporal cell-cell interactions, and extracellular microenvironments. This creative platform and its multiorgan integration recapitulating organ-level structures and functions can bring unprecedented benefits to a diversity of applications, such as developing human in vitro models for healthy or diseased organs, enabling the investigation of fundamental mechanisms in disease etiology and organogenesis, benefiting drug development in toxicity screening and target discovery, and potentially serving as replacements for animal testing. Recent advances in novel designs and examples for developing organ-on-a-chip platforms are reviewed. The potential for using this emerging technology in understanding human physiology including mechanical, chemical, and electrical signals with precise spatiotemporal controls are discussed. The current challenges and future directions that need to be pursued for these proof-of-concept studies are also be highlighted.

Improved survival of porcine acute liver failure by a bioartificial liver device implanted with induced human functional hepatocytes

Acute liver failure (ALF) is a life-threatening illness. The extracorporeal cell-based bioartificial liver (BAL) system could bridge liver transplantation and facilitate liver regeneration for ALF patients by providing metabolic detoxification and synthetic functions. Previous BAL systems, based on hepatoma cells and non-human hepatocytes, achieved limited clinical advances, largely due to poor hepatic functions, cumbersome preparation or safety concerns of these cells. We previously generated human functional hepatocytes by lineage conversion (hiHeps). Here, by improving functional maturity of hiHeps and producing hiHeps at clinical scales (3 billion cells), we developed a hiHep-based BAL system (hiHep-BAL). In a porcine ALF model, hiHep-BAL treatment restored liver functions, corrected blood levels of ammonia and bilirubin, and prolonged survival. Importantly, human albumin and α-1-antitrypsin were detectable in hiHep-BAL-treated ALF pigs. Moreover, hiHep-BAL treatment led to attenuated liver damage, resolved inflammation and enhanced liver regeneration. Our findings indicate a promising clinical application of the hiHep-BAL system.

3D liver models on a microplatform: well-defined culture, engineering of liver tissue and liver-on-a-chip

The liver, the largest organ in the human body, is a multi-functional organ with diverse metabolic activities that plays a critical role in maintaining the body and sustaining life. Although the liver has excellent regenerative and recuperative properties, damages caused by chronic liver diseases or viral infection may lead to permanent loss of liver functions. Studies of liver disease mechanism have focused on drug screening and liver tissue engineering techniques, including strategies based on in vitro models. However, conventional liver models are plagued by a number of limitations, which have motivated the development of 'liver-on-a-chip' and microplatform-based bioreactors that can provide well-defined microenvironments. Microtechnology is a promising tool for liver tissue engineering and liver system development, as it can mimic the complex in vivo microenvironment and microlevel ultrastructure, by using a small number of human cells under two-dimensional (2D) and three-dimensional (3D) culture conditions. These systems provided by microtechnology allow improved liver-specific functions and can be expanded to encompass diverse 3D culture methods, which are critical for the maintenance of liver functions and recapitulation of the features of the native liver. In this review, we provide an overview of microtechnologies that have been used for liver studies, describe biomimetic technologies for constructing microscale 2D and 3D liver models as well as liver-on-a-chip systems and microscale bioreactors, and introduce applications of liver microtechnology and future trends in the field.

No transmission of porcine endogenous retrovirus in an acute liver failure model treated by a novel hybrid bioartificial liver containing porcine hepatocytes

BACKGROUND

A novel hybrid bioartificial liver (HBAL) was constructed using an anionic resin adsorption column and a multi-layer flat-plate bioreactor containing porcine hepatocytes co-cultured with bone marrow mesenchymal stem cells (MSCs). This study aimed to evaluate the microbiological safety of the HBAL by detecting the transmission of porcine endogenous retroviruses (PERVs) into canines with acute liver failure (ALF) undergoing HBAL.

METHODS

Eight dogs with ALF received a 6-hour HBAL treatment on the first day after the modeling by D-galactosamine administration. The plasma in the HBAL and the whole blood in the dogs were collected for PERV detection at regular intervals until one year later when the dogs were sacrificed to retrieve the tissues of several organs for immunohistochemistry and Western blotting for the investigation of PERV capsid protein gag p30 in the tissue. Furthermore, HEK293 cells were incubated to determine the in vitro infectivity.

RESULTS

PERV RNA and reverse transcriptase activity were observed in the plasma of circuit 3, suggesting that PERV particles released in circuit 3. No positive PERV RNA and reverse transcriptase activity were detected in other plasma. No HEK293 cells were infected by the plasma in vitro. In addition, all PERV-related analyses in peripheral blood mononuclear cells and tissues were negative.

CONCLUSION

No transmission of PERVs into ALF canines suggested a reliable microbiological safety of HBAL based on porcine hepatocytes.

Emerging chitin and chitosan nanofibrous materials for biomedical applications

Over the past several decades, we have witnessed significant progress in chitosan and chitin based nanostructured materials. The nanofibers from chitin and chitosan with appealing physical and biological features have attracted intense attention due to their excellent biological properties related to biodegradability, biocompatibility, antibacterial activity, low immunogenicity and wound healing capacity. Various methods, such as electrospinning, self-assembly, phase separation, mechanical treatment, printing, ultrasonication and chemical treatment were employed to prepare chitin and chitosan nanofibers. These nanofibrous materials have tremendous potential to be used as drug delivery systems, tissue engineering scaffolds, wound dressing materials, antimicrobial agents, and biosensors. This review article discusses the most recent progress in the preparation and application of chitin and chitosan based nanofibrous materials in biomedical fields.

Preparation and characterization of galactosylated alginate-chitosan oligomer microcapsule for hepatocytes microencapsulation

Galactosylated alginate (GA)-chitosan oligomer microcapsule was prepared to provide a sufficient mechanical stability, a selective permeability and an appropriate three-dimensional (3D) microenvironment for hepatocytes microencapsulation. The microcapsule has a unique asymmetric membrane structure, with a dense layer located in the inner surface and gradually decreasing toward the outside surface. The stable microcapsule was obtained when GA lower than 50%, while the permeability was increased with increasing of GA. A balance between mechanical stability and permeability was achieved through modulating membrane porosity and thickness. The optimal microcapsule displays a selective permeability allowing efficient transport of human serum albumin while effectively blocking immunoglobulin G. Hepatocytes exhibited high and long term viability (>92%), proliferability, multicellular spheroid morphology, and enhancement of liver-specific functions in the microcapsule wherein galactose moieties present chemical cues to support cell-matrix interactions while the 3D structure of the microcapsule behaves physical cues to facilitate cell-cell interactions.

Perioperative management in liver transplantation for acute liver failure

Acute liver failure occurs abruptly with rapid progression. Traditional medical treatment and simple non-bioartificial liver support system cannot reverse the prognosis of acute liver failure (ALF), and liver transplantation is the only effective treatment. However, donor liver shortage, the need of a life-long immunosuppressive therapy as well as complex postoperative complications make ALF patients facing a variety of challenges in the perioperative period of liver transplantation, which are directly related to the success rate of surgery and the mortality. This article aims to discuss perioperative difficulties and preventive measures in liver transplantation for ALF by exploring how to extend the lives of patients before liver transplantation and how to deal with postoperative complications.

Galactose-functionalized gelatin hydrogels improve the functionality of encapsulated HepG2 cells

The present study investigates the effect of galactosylated gelatin on encapsulated HepG2 cells. Methacrylamide modified gelatin is evaluated and compared with its galactosylated counterpart with respect to effects on viability, morphological characteristics, proliferation, and the expression of hepatocyte specific markers. The research reveals that further modifications of methacrylamide modified gelatin are possible without affecting the survival of the encapsulated cells (viability of 90%). Moreover, the study demonstrates a clear and long-term (up to 21 d) improvement in hepatocyte specific gene expression when the cells are encapsulated in the galactosylated gelatin. It is concluded that the use of galactosylated gelatin derivates supports the hepatocyte phenotype.

Role of culture conditions on in vitro transformation and cellular colonization of biomimetic HA-Col scaffolds

We have recently developed new 3D hydroxyapatite/collagen (50/50 wt%) scaffolds using a biomimetic synthesis approach. The first in vitro tests performed in static culture showed a limited cell colonization and survival inside the scaffolds. The current study evaluated in dynamic culture the scaffold changes and colonization by human immortalized osteoprogenitor STRO-1A cells. The stability of our scaffolds in the different culture conditions (static, low flow, high flow) was validated by the maintenance of the pore diameter and interconnectivity over 21 d. The colonization and the viability of STRO-1A cells inside the scaffolds were further evaluated on histological sections. It was demonstrated that only the high flow-rate allowed cell survival after 7 d and a complete scaffold colonization. Moreover, the colonization and viability were different in function of the scaffold position inside the perfusion container. The differentiation markers (alkaline phosphatase activity, type I procollagen and osteocalcin synthesis) of STRO-1A cells were analyzed in the culture medium after 7, 14 and 21 d. The low flow-rate increased significantly the three markers compared with static conditions. In contrast, markers were reduced in high flow-rate compared with low flow-rate. To explain this surprising result, we hypothesized that the different molecules were actually adsorbed on the scaffold because of the closed circuit used in the high flow-rate conditions. In summary, this study provides original results on the influence of flow rate but mostly of the circuit used (open/closed) on the structural modifications and cell colonization of collagen-HA scaffolds.

Immunosafety evaluation of a multilayer flat-plate bioartificial liver

INTRODUCTION

To study and evaluate the immunosafety of our newly developed multilayer flat-plate bioartificial liver (BAL) in treatment of canines with acute liver failure.

METHODS

Fresh porcine hepatocytes and bone marrow mesenchymal stem cells were cocultured in new BAL. Ten canine models with acute liver failure were set up through D-galactosamine administration; 24 hours after administration, the beagles were randomly allocated to a 6-hour treatment with the BAL. The beagles were divided into 2 groups by treatment times. Group 1 beagles (n = 5) received a single BAL treatment. Group 2 beagles (n = 5) received 3 BAL treatments. The hemodynamic, hematologic response and humoral immune responses to BAL therapy were studied before and after treatments.

RESULTS

All beagles remained hemodynamically and hematologically stable during BAL treatments. The levels of IgG and IgM were similar before and after treatment after a single treatment. In addition, the level of CH50 in group 1 slightly decreased after the initiation of BAL treatment, and then the level recovered to baseline quickly after treatments. Time-course changes of the levels of antibodies and CH50 after 3 treatments in group 2 were similar to group 1. Only trace levels of IgG were detected in BAL medium after treatments.

CONCLUSION

The multilayer flat-plate BAL showed a great immunosafety in the treatment of canines with acute liver failure and exhibited a good prospect of its use in clinic.

Microbiological safety of a novel bio-artificial liver support system based on porcine hepatocytes: a experimental study

Background

Our institute has developed a novel bio-artificial liver (BAL) support system, based on a multi-layer radial-flow bioreactor carrying porcine hepatocytes and mesenchymal stem cells. It has been shown that porcine hepatocytes are capable of carrying infectious porcine endogenous retroviruses (PERVs) into human cells, thus the microbiological safety of any such system must be confirmed before clinical trials can be performed. In this study, we focused on assessing the status of PERV infection in beagles treated with the novel BAL.

Methods

Five normal beagles were treated with the novel BAL for 6 hours. The study was conducted for 6 months, during which plasma was collected from the BAL and whole blood from the beagles at regular intervals. DNA and RNA in both the collected peripheral blood mononuclear cells (PBMCs) and plasma samples were extracted for conventional PCR and reverse transcriptase (RT)-PCR with PERV-specific primers and the porcine-specific primer Sus scrofa cytochrome B. Meanwhile, the RT activity and the in vitro infectivity of the plasma were measured.

Results

Positive PERV RNA and RT activity were detected only in the plasma samples taken from the third circuit of the BAL system. All other samples including PBMCs and other plasma samples were negative for PERV RNA, PERV DNA, and RT activity. In the in vitro infection experiment, no infection was found in HEK293 cells treated with plasma.

Conclusions

No infective PERV was detected in the experimental animals, thus the novel BAL had a reliable microbiological safety profile.

Factors Influencing the Transfer of Porcine Endogenous Retroviruses across the Membrane in Bioartificial Livers

Objectives:

to investigate the factors influencing the transfer of porcine endogenous retroviruses (PERVs) across the membrane in a new bioartificial liver (BAL).

Methods:

A new BAL containing 2 circuits was constructed using plasma component separators with membrane pore sizes of 10 nm, 20 nm, 30 nm, and 35 nm, or a plasma filter with a membrane pore size of 500 nm. Cocultured cells of porcine hepatocytes and mesenchymal stem cells or single porcine hepatocytes were incubated in the bioreactors, and the BAL worked for 72 hours, with supernatant samples in internal and external circuits collected every 12 hours. PERV RNA, reverse transcriptase (RT) activity, and in vitro infectivity of the supernatant were detected.

Results:

With the plasma filters, the results of PERV detection were the same in both circuits. With plasma component separators, PERV RNA was found in the external circuits, but no positive RT activity or HEK293 cell infection was found. The time at which the PERV RNA was first detected varied with the pore size of membrane; the larger the membrane pore size was, the earlier the RNA was detected. The PERV RNA level in the external circuits was reduced significantly compared with that in the internal circuits at any detecting time.

Conclusions:

The plasma component separators with membrane pore size ≤35 nm could significantly reduce the passage of infectious PERVs. And the membrane pore size, the treatment duration, and the viral level in the internal circuit were potential factors influencing the transfer of PERVs across the membrane in a BAL. In addition, a low risk of PERV transmission from porcine hepatocytes to human cells was found.

Systematic review: extracorporeal bio-artificial liver-support system for liver failure

BACKGROUND

Orthotopic liver transplantation (OLT) is the only effective long-term treatment for liver failure by now. However, it is not yet a perfect choice due to donor-organ shortage and the need of a lifelong immunosuppressive therapy. Therefore, it is necessary to find a new approach to fighting the disease. Several published clinical trials have reported the therapeutic effect of bio-artificial liver (BAL) for liver failure.

OBJECTIVE

To overview and evaluate the current clinical application and outcomes of extracorporeal BAL support system during the past 15 years.

METHODS

Relevant studies were retrieved from PubMed and Cochrane Library databases. Independent assessments and the final consensus decision were performed by three independent reviewers. Acceptable study designs included randomized controlled trials, controlled clinical trials, and case reports. A total of 31 studies were tabulated and critically appraised in terms of characteristics, methods, and outcomes.

RESULTS

There was a trend of falling into the normal ranges with the clinical and biochemical parameters after the BAL treatment. The neurological status of most patients was improved or stabilized during BAL treatment as well. No significant effect on survival could be seen after the BAL treatment.

CONCLUSIONS

Although BAL system proved to be a success in some clinical cases reported, it still needs to be improved greatly.

Isolation, culture and cryopreservation of adult human hepatocytes

AIM: To establish a stable method for the isolation, culture and cryopreservation of adult primary hepatocytes to provide a potential hepatocyte resource for the treatment of acute and chronic liver diseases using hepatocyte transplantation and bioartificial liver support systems, and for the use of hepatocytes as an in vitro model of the liver.

METHODS: Adult hepatocytes were isolated from 20 separate donors using a two-step extracorporeal collagenase perfusion technique. The hepatocytes were preincubated in HepatoZYME-SFM medium for 2, 6, 12, 24, 36, 48 or 72 h, transferred to HepatoZYME-SFM medium containing 10% FBS and 10% DMSO, immediately put into an isopropanol progressive freezing container at -80 ℃ overnight, and immersed in liquid nitrogen the next day. During the post-thaw culture period, cell viability, plating efficiency, albumin secretion and urea synthesis were analyzed.

RESULTS: The viability and plating efficiency of hepatocytes isolated using the two-step extracorporeal collagenase perfusion technique were 75.0% ± 4.6% and 72.0% ± 6.0%, respectively. Preincubation at 4 ℃ for 12 or 24 hours proved to be optimal for albumin secretion. Compared to the immediate cryopreservation group, significant improvement was observed in viability (61.4% ± 4.8%, 62.0% ± 5.6% vs 53.4% ± 4.2%, both P < 0.05), plating efficiency (63.2% ± 5.8%, 62.6% ± 3.6% vs 55.2% ± 4.6%, both P < 0.05), albumin secretion and urea synthesis (P < 0.05) in cells preincubated at 4 ℃ for 12 and 24 hours.

CONCLUSION: The two-step extracorporeal collagenase perfusion technique provides a novel, simple, and reliable method for hepatocyte isolation. Preincubation of human hepatocytes at 4 ℃ for 12 to 24 hours prior to cryopreservation allows to obtain hepatocytes ideal for use in pharmacotoxicology, bioartificial liver and cell therapy.

Influence of chitosan nanofiber scaffold on porcine endogenous retroviral expression and infectivity in pig hepatocytes

AIM: To investigate the influence of chitosan nanofiber scaffold on the production and infectivity of porcine endogenous retrovirus (PERV) expressed by porcine hepatocytes.

METHODS: Freshly isolated porcine hepatocytes were cultured with or without chitosan nanofiber scaffold (defined as Nano group and Hep group) for 7 d. The daily collection of culture medium was used to detect reverse transcriptase (RT) activity with RT activity assay kits and PERV RNA by reverse transcription-polymerase chain reaction (PCR) and real time PCR with the PERV specific primers. And Western blotting was performed with the lysates of daily retrieved cells to determine the PERV protein gag p30. Besides, the in-vitro infectivity of the supernatant was tested by incubating the human embryo kidney 293 (HEK293) cells.

RESULTS: The similar changing trends between two groups were observed in real time PCR, RT activity assay and Western blotting. Two peaks of PERV expression at 10H and Day 2 were found and followed by a regular decline. No significant difference was found between two groups except the significantly high level of PERV RNA at Day 6 and PERV protein at Day 5 in Nano group than that in Hep group. And in the in-vitro infection experiment, no HEK293 cell was infected by the supernatant.

CONCLUSION: Chitosan nanofiber scaffold might prolong the PERV secreting time in pig hepatocytes but would not obviously influence its productive amount and infectivity, so it could be applied in the bioartificial liver without the increased risk of the virus transmission.

Effects of membrane molecular weight cutoff on performance of a novel bioartificial liver

Immunoisolation using semipermeable membranes has been incorporated into bioartificial liver (BAL) devices to separate cellular components of the recipient's immune system from the cells within the BAL device. This study was designed to explore the influence of membrane molecular weight cutoff on performance of the multilayer radial-flow BAL using porcine hepatocytes cocultured with mesenchymal stem cells. In this study, healthy beagles underwent 6-h treatment with a BAL containing membrane with 200 kDa retention rating or 1200 kDa retention rating. Functional markers of BAL performance were monitored before and after treatment, as well as cytotoxic immune response to BAL therapy. The results showed that hepatocyte performance levels such as albumin secretion, urea synthesis, and viability were all significantly higher in 200 kDa retention rating group compared with the 1200 kDa retention rating group after treatment (P <  0.05). Significant levels of canine proteins were detected in BAL medium from the 1200 kDa retention rating group. Fluorescence microscopy further verified that heavy deposition of canine IgG, IgM, and complement (C3) on coculture cells was obtained after BAL treatment in the 1200 kDa retention rating group. However, only trace deposits of canine immunoproteins were observed on coculture cells obtained from BAL in the 200 kDa retention rating group. Small membrane molecular weight cutoff of the BAL could reduce the transfer of xenoreactive antibodies into the BAL medium and improve the performance of the BAL.

Three-dimensional culture and bioreactors for cellular therapies

A bioreactor is defined as a specifically designed vessel to facilitate the growth of organisms and cells through application of physical and/or electrical stimulus. When cells with therapeutic potential were first discovered, they were initially cultured and expanded in two-dimensional (2-D) culture vessels such as plates or T-flasks. However, it was soon discovered that bioreactors could be used to expand and maintain cultures more easily and efficiently. Since then, bioreactors have come to be accepted as an indispensable tool to advance cell and tissue culture further. A wide array of bioreactors has been developed to date, and in recent years businesses have started supplying bioreactors commercially. Bioreactors in the research arena range from stirred tank bioreactors for suspension culture to those with various mechanical actuators that can apply different fluidic and mechanical stresses to tissues and three-dimensional (3-D) scaffolds. As regenerative medicine gains more traction in the clinic, bioreactors for use with cellular therapies are being developed and marketed. While many of the simpler bioreactors are fit for purpose, others fail to satisfy the complex requirements of tissues in culture. We have examined the use of different types of bioreactors in regenerative medicine and evaluated the application of bioreactors in the realization of emerging cellular therapies.

Development of a porcine bladder acellular matrix with well-preserved extracellular bioactive factors for tissue engineering

In this study, we compared four decellularization protocols and finally developed an optimized one through which a porcine bladder acellular matrix (BAM) with well-preserved extracellular bioactive factors had been prepared. In this protocol, the intact bladder was treated with trypsin/ethylenediaminetetraacetic acid to remove the urothelium, then with hypotonic buffer and Triton X-100 in hypertonic buffer to remove the membranous and cytoplasmic materials, and finally with nuclease to degrade the cellular nuclear components. Bladder distention and mechanical agitation were simultaneously used to facilitate cell removal. Meanwhile, several preservative techniques, including limitation of wash time, supplement with inhibitors of proteinase, control of the pH value and temperature of the wash buffer, ethylene oxide sterilization, and lyophilization of the scaffold for storage, were used to protect the extracellular bioactive factors. This decellularization protocol had completely removed the cellular materials and well preserved the extracellular collagen, sulfated glycosaminoglycan (GAG), and bioactive factors. The preserved bioactive factors had a great potential of promoting the proliferation and migration of both human bladder smooth muscle cell and human umbilical vein endothelial cell. It was also found that the amount of two representative bioactive factors, platelet-derived growth factor BB and vascular endothelial growth factor, was positively correlated with the sulfated GAG content in the porcine BAM, implying that the amount of sulfated GAG might be a determinant for preservation of bioactive factors in the decellularized tissues. In conclusion, the porcine BAM with well-preserved extracellular bioactive factors might be a favorable scaffold for tissue engineering applications.

Bioartificial liver devices: Perspectives on the state of the art

Acute liver failure remains a significant cause of morbidity and mortality. Bioartificial liver (BAL) devices have been in development for more than 20 years. Such devices aim to temporarily take over the metabolic and excretory functions of the liver until the patients' own liver has recovered or a donor liver becomes available for transplant. The important issues include the choice of cell materials and the design of the bioreactor. Ideal BAL cell materials should be of good viability and functionality, easy to access, and exclude immunoreactive and tumorigenic cell materials. Unfortunately, the current cells in use in BAL do not meet these requirements. One of the challenges in BAL development is the improvement of current materials; another key point concerning cell materials is the coculture of different cells. The bioreactor is an important component of BAL, because it determines the viability and function of the hepatocytes within it. From the perspective of bioengineering, a successful and clinically effective bioreactor should mimic the structure of the liver and provide an in vivo-like microenvironment for the growth of hepatocytes, thereby maintaining the cells' viability and function to the maximum extent. One future trend in the development of the bioreactor is to improve the oxygen supply system. Another direction for future research on bioreactors is the application of biomedical materials. In conclusion, BAL is, in principle, an important therapeutic strategy for patients with acute liver failure, and may also be a bridge to liver transplantation. It requires further research and development, however, before it can enter clinical practice.

Liver Cell Culture Devices

In the last 15 years many different liver cell culture devices, consisting of functional liver cells and artificial materials, have been developed. They have been devised for numerous different applications, such as temporary organ replacement (a bridge to liver transplantation or native liver regeneration) and as in vitro screening systems in the early stages of the drug development process, like assessing hepatotoxicity, hepatic drug metabolism, and induction/inhibition studies. Relevant literature is summarized about artificial human liver cell culture systems by scrutinizing PubMed from 2003 to 2009. Existing devices are divided in 2D configurations (e.g., static monolayer, sandwich, perfused cells, and flat plate) and 3D configurations (e.g., liver slices, spheroids, and different types of bioreactors). The essential features of an ideal liver cell culture system are discussed: different types of scaffolds, oxygenation systems, extracellular matrixes (natural and artificial), cocultures with nonparenchymal cells, and the role of shear stress problems. Finally, miniaturization and high-throughput systems are discussed. All these factors contribute in their own way to the viability and functionality of liver cells in culture. Depending on the aim for which they are designed, several good systems are available for predicting hepatotoxicity and hepatic metabolism within the general population. To predict hepatotoxicity in individual cases genomic analysis might be essential as well.

In vitro analysis of cryopreserved alginate-poly-L-lysine-alginate-microencapsulated human hepatocytes

BACKGROUND

The availability of well-characterized human hepatocytes that can be frozen and thawed will be critical for cell therapy. We addressed whether human hepatocytes can recover after microencapsulated cryopreservation and investigated whether these cryopreserved microencapsulated hepatocytes can be used for clinical applications.

METHODS

Adult hepatocytes of 18 separate donors were isolated with a two-step extracorporeal collagenase perfusion technique. After pre-incubation at 4 degrees C for 12-24 h in HepatoZYME-SFM, hepatocytes were microencapsulated using alginate-poly-L-lysine-alginate microcapsules. The microencapsulated hepatocytes were transferred to a complete medium containing 10% dimethyl sulphoxide. They were immediately placed into an isopropanol progressive freezing container at -80 degrees C overnight and immersed in liquid nitrogen the next day. During the post-thawing culture period, albumin secretion, urea synthesis, cell cycle, mRNA and protein levels, as well as the morphology and pathology structure of pre-incubation before microencapsulated cryopreservation (PMC) groups were analysed.

RESULTS

Compared with the immediate cryopreservation (IC) groups, we found significant improvement in the mRNA and protein levels in the attached cells, and higher secretion of albumin and urea levels after thawing. In the attached cultured human cryopreserved/thawed hepatocytes from the PMC group, albumin production was not significantly different from those of the direct culture groups on days 2, 3 and 4. The preserved morphology in the PMC group compared with the IC group was obvious.

CONCLUSIONS

The results of the present study suggested recovery of the functional and morphological integrity of human hepatocytes after pre-incubation at 4 degrees C for 12-24 h before microencapsulated cryopreservation. These studies offer the possibility for clinical applications in pharmacotoxicology, bioartificial liver and cell therapy in humans.

Rat hepatocyte aggregate formation on discrete aligned nanofibers of type-I collagen-coated poly(L-lactic acid)

Primary hepatocytes cultured in three dimensional tissue constructs composed of multicellular aggregates maintain normal differentiated cellular function in vitro while cultured monolayers do not. Here, we report a technique to induce hepatocyte aggregate formation using type-I collagen-coated poly(L-lactic acid) (PLLA) discrete aligned nanofibers (disAFs) by providing limited cell-substrate adhesion strength and restricting cell migration to uniaxial movement. Kinetics of aggregate formation, morphology and biochemical activities of rat hepatocyte aggregates were tested over a 15 day culture period. Evidence was provided that physical cues from disAFs quickly induced the formation of aggregates. After 3 days in culture, 88.3% of free hepatocytes on disAFs were incorporated into aggregates with an average diameter of 61 +/- 18 microm. Hepatocyte aggregates formed on disAFs displayed excellent cell retention, cell activity and stable functional expression in terms of albumin secretion, urea synthesis and phase I and II (CYP1A and UGT) metabolic enzyme activity compared to monolayer culture of hepatocytes on tissue culture plastic (TCP) with type-I collagen as well as on meshes of type-I collagen-coated PLLA random nanofibers (meshRFs). These results suggest that disAFs may be a suitable method to maintain large-scale hepatic cultures with high activity for tissue engineering research and potential therapeutic applications, such as bioartificial liver devices.

A simple isolation and cryopreservation method for adult human hepatocytes

OBJECTIVE

The objective of this study was to establish a stable method of isolation, culture and cryopreservation of adult primary hepatocytes to provide potential hepatocyte resources for the treatment of acute and chronic liver diseases by hepatocyte transplantation and bioartificial liver support systems, and for the use of hepatocytes as an in vitro model of the liver.

METHODS

Adult hepatocytes of 20 separate donors were isolated with a two-step extracoporeal collagenase perfusion technique. Seven preincubation time points (2h, 6h, 12h, 24h, 36h, 48h and 72h) were selected, then the hepatocytes were transferred to HepatoZYME-SFM medium containing 10% FBS and 10% DMSO, and were immediately put into an isopropanol progressive freezing container at -80 degrees C overnight and immersed in liquid nitrogen the next day. During the postthawing culture period, viability, plating efficiency, albumin secretion and urea synthesis were analyzed.

RESULTS

The viability and plating efficiency of hepatocytes after partial hepatectomy using two-step extracorporeal collagenase perfusion technique were 75.0+/-4.6% and 72.0+/-6.0% respectively. Preincubation at 4? for 12 hours or 24 hours proved to be the optimal time at which the albumin secretion was higher than at other time points (p<0.05). Compared to the immediate cryopreservation groups (IC), we also found significant improvement in viability (61.4+/-4.8%/62.0+/-5.6% vs. 53.4+/-4.2%, p<0.05), plating efficiency (63.2+/-5.8%/62.6+/-3.6% vs. 55.2+/-4.6%, p<0.05), albumin secretion and urea synthesis (p<0.05) at these time points.

CONCLUSIONS

The two-step extracorporeal collagenase perfusion technique after partial hepatectomy provides a novel, simple, and reliable method for hepatocyte isolation. The results of the present study suggest that recovery of human hepatocytes after isolation preincubation at 4 degrees C for 12 hours to 24 hours prior to cryopreservation can obtain hepatocytes ideal for use in pharmacotoxicology, bioartificial liver and cell therapy research purposes.