Pyroelectric Polyelectrolyte Brushes

Piezo- and pyroelectric materials are of interest, for example, for energy harvesting applications, for the development of tactile sensors, as well as neuromorphic computing. This study reports the observation of pyro- and piezoelectricity in thin surface-attached polymer brushes containing zwitterionic and electrolytic side groups that are prepared via surface-initiated polymerization. The pyro- and piezoelectric properties of the surface-grafted polyelectrolyte brushes are found to sensitively depend on and can be tuned by variation of the counterion. The observed piezo- and pyroelectric properties reflect the structural complexity of polymer brushes, and are attributed to a complex interplay of the non-uniform segment density within these films, together with a non-uniform distribution of counterions and specific ion effects. The fabrication of thin pyroelectric films by surface-initiated polymerization is an important addition to the existing strategies toward such materials. Surface-initiated polymerization, in particular, allows for facile grafting of polar thin polymer films from a wide range of substrates via a straightforward two-step protocol that obviates the need for multistep laborious synthetic procedures or thin film deposition protocols. The ability to produce polymer brushes with piezo- and pyroelectric properties opens up new avenues of application of these materials, for example, in energy harvesting or biosensing.

Fouling Resistance of Brush-Modified Elastomers

The most effective antifouling coatings are designed to slowly release biocides that target a broad spectrum of marine organisms. However, as biocides have a deleterious effect on marine life, there is demand for environmentally friendly coatings that resist fouling through physical interactions. We propose a simple platform for the development of such coatings based on bottlebrush-modified elastomers. The bottlebrush additives were synthesized to have side chain chemistries that are known to be fouling-resistant, and these were incorporated in a commercial elastomer through blending and/or covalent attachment. The fouling performance of these coatings was highly variable, with area coverages of hard and soft foulants ranging from 1.4% to 7.2% and 29.1% to 64.0%, respectively, across a set of eight materials. The origin of these differences was explained by examining the structure of the coating surface through chemical imaging by time-of-flight secondary ion mass spectrometry (TOF-SIMS) and topographic imaging by atomic force microscopy (AFM). We found that fouling by certain soft and hard fouling organisms was primarily influenced by surface composition, which was controlled by both the chemistry and loading level of the bottlebrush additive, and was independent of the inherent surface roughness. While no type of coating could resist all soft and hard foulants, a formulation based on a bottlebrush copolymer additive with both siloxane and fluorinated monomers was effective against nearly all organisms encountered in the study.

Cinematic reflectometry using QIKR, the quite intense kinetics reflectometer

The Quite Intense Kinetics Reflectometer (QIKR) will be a general-purpose, horizontal-sample-surface neutron reflectometer. Reflectometers measure the proportion of an incident probe beam reflected from a surface as a function of wavevector (momentum) transfer to infer the distribution and composition of matter near an interface. The unique scattering properties of neutrons make this technique especially useful in the study of soft matter, biomaterials, and materials used in energy storage. Exploiting the increased brilliance of the Spallation Neutron Source Second Target Station, QIKR will collect specular and off-specular reflectivity data faster than the best existing such machines. It will often be possible to collect complete specular reflectivity curves using a single instrument setting, enabling "cinematic" operation, wherein the user turns on the instrument and "films" the sample. Samples in time-dependent environments (e.g., temperature, electrochemical, or undergoing chemical alteration) will be observed in real time, in favorable cases with frame rates as fast as 1 Hz. Cinematic data acquisition promises to make time-dependent measurements routine, with time resolution specified during post-experiment data analysis. This capability will be deployed to observe such processes as in situ polymer diffusion, battery electrode charge-discharge cycles, hysteresis loops, and membrane protein insertion into lipid layers.

Architecture- and Composition-Controlled Self-Assembly of Block Copolymers and Binary Mixtures With Crosslinkable Components: Chain Exchange Between Block Copolymer Nanoparticles

Chain exchange behaviors in self-assembled block copolymer (BCP) nanoparticles (NPs) at room temperature are investigated through observations of structural differences between parent and binary systems of BCP NPs with and without crosslinked domains. Pairs of linear diblock or triblock, and branched star-like polystyrene-poly(2-vinylpyridine) (PS-PVP) copolymers that self-assemble in a PVP-selective mixed solvent into BCP NPs with definite differences in size and self-assembled morphology are combined by diverse mixing protocols and at different crosslinking densities to reveal the impact of chain exchange between BCP NPs. Clear structural evolution is observed by dynamic light scattering and AFM and TEM imaging, especially in a blend of triblock + star copolymer BCP NPs. The changes are ascribed to the chain motion inherent in the dynamic equilibrium, which drives the system to a new structure, even at room temperature. Chemical crosslinking of PVP corona blocks suppresses chain exchange between the BCP NPs and freezes the nanostructures at a copolymer crosslinking density (CLD) of ∼9%. This investigation of chain exchange behaviors in BCP NPs having architectural and compositional complexity and the ability to moderate chain motion through tailoring the CLD is expected to be valuable for understanding the dynamic nature of BCP self-assemblies and diversifying the self-assembled structures adopted by these systems. These efforts may guide the rational construction of novel polymer NPs for potential use, for example, as drug delivery platforms and nanoreactors.

Highly fluorescent purine-containing conjugated copolymers with tailored optoelectronic properties

Conjugated copolymers containing electron donor and acceptor units in their main chain have emerged as promising materials for organic electronic devices due to their tunable optoelectronic properties.

Tuning fullerene miscibility with porphyrin-terminated P3HTs in bulk heterojunction blends

Understanding and manipulating the miscibility of donor and acceptor components in the active layer morphology is important to optimize the longevity of organic photovoltaic devices and control power conversion efficiency. In pursuit of this goal, a "porphyrin-capped" poly(3-hexylthiophene) was synthesized to take advantage of strong porphyrin:fullerene intermolecular interactions that modify fullerene miscibility in the active layer. End-functionalized poly(3-hexylthiophene) was synthesized via catalyst transfer polymerization and subsequently functionalized with a porphyrin moiety via post-polymerization modification. UV-vis spectroscopy and X-ray diffraction measurements show that the porphyrin-functionalized poly(3-hexylthiophene) exhibits increased intermolecular interactions with phenyl-C61-butyric acid methyl ester (PCBM) in the solid state compared to unfunctionalized poly(3-hexylthiophene) without sacrificing microstructure ordering that facilitates optimal charge transport properties. Additionally, differential scanning calorimetry revealed porphyrin-functionalized poly(3-hexylthiophene) crystallization decreased only slightly (1-6%) compared to unfunctionalized poly(3-hexylthiophenes) while increasing fullerene miscibility by 55%. Preliminary organic photovoltaic device results indicate device power conversion efficiency is sensitive to additive loading levels, as evident by a slight increase in power conversion efficiency at low additive loading levels but a continuous decrease with increased loading levels. While the increased fullerene miscibility is not balanced with significant increases in power conversion efficiency, this approach suggests that integrating non-bonded interaction potentials is a useful pathway for manipulating the morphology of the bulk heterojunction thin film, and porphyrin-functionalized poly(3-hexylthiophenes) may be useful additives in that regard.

Tailoring Azlactone-Based Block Copolymers for Stimuli-Responsive Disassembly of Nanocarriers

Stimuli-responsive nanoparticles based on a reactive block copolymers (BCPs) of poly(ethylene glycol)-b-poly(2-vinyl-4,4-dimethylazlactone) (PEG-b-PVDMA) have been fabricated for loading and controlled release of molecular cargoes. Microphase segregation of PEG-b-PVDMA BCPs enables the construction of well-defined nanoparticles in aqueous solutions. The azlactone groups in VDMA repeat units offer active sites for hydrophilization of the BCPs and functionalization by primary amines. The hydrophilization of PEG-b-PVDMA BCPs induces gradual reconstruction and dissociation of the BCP nanoparticles. Functional primary amines can be conjugated to PEG-b-PVDMA BCPs, yielding azobenzene- and pyridine-containing BCPs. The self-assembled nanoparticles made from the functionalized BCPs can disassemble in response to different external stimuli (e.g., addition of β-cyclodextrin and pH changes). The gradual reconstruction of functionalized PEG-b-PVDMA BCP nanoparticles caused by hydrolysis of residual azlactone groups provides a novel method to engineer sub-50 nm, well-dispersed, stimuli-responsive nanoparticles. These nanoparticles can incorporate molecular cargoes and release them upon external stimuli, making the azlactone-containing BCPs attractive platforms for the development of controlled delivery vehicles.

Surface-Induced Ordering Depresses Through-Film Ionic Conductivity in Lamellar Block Copolymer Electrolytes

Lamellar block copolymers based on polymeric ionic liquids (PILs) show promise as electrolytes in electrochemical devices. However, these systems often display structural anisotropy that depresses the through-film ionic conductivity. This work hypothesizes that structural anisotropy is a consequence of surface-induced ordering, where preferential adsorption of one block at the electrode drives a short-range stacking of the lamellae. This point was examined with lamellar diblock copolymers of polystyrene (PS) and poly(1-(2-acryloyloxyethyl)-3-butylimidazolium bis(trifluoromethanesulfonyl)imide) (PIL). The bulk PS-PIL structure was comprised of randomly oriented lamellar grains. However, in thin PS-PIL films (100-400 nm), the lamellae were stacked normal to the plane of the film, and islands/holes were observed when the as-prepared film thickness was incommensurate with the natural lamellar periodicity. Both of these attributes are well-known consequences of preferential wetting at surfaces. The ionic conductivity of thick PS-PIL films (50-100 μm) was approximately 20× higher in the in-plane direction than in the through-plane direction, consistent with a mixed structure comprised of randomly oriented lamellae throughout the interior of the film and highly oriented lamellae at the electrode surface. Therefore, to fully optimize the performance of a block copolymer electrolyte, it is important to consider the effects of surface interactions on the ordering of domains.

Synthesis and optoelectronic properties of benzodithiophene-based conjugated polymers with hydrogen bonding nucleobase side chain functionality

Nucleobase functionalities in conjugated, alternating copolymers participate in interbase hydrogen bonding, which promotes molecular assembly and organization in thin films and enhances optical and electronic properties.

Synthesis of a soluble adenine-functionalized polythiophene through direct arylation polymerization and its fluorescence responsive behavior

An adenine-functionalized polythiophene is synthesized via direct arylation polymerization using Boc-protection to overcome catalyst deactivation. The resulting copolymer is highly soluble and shows reversible fluorescence quenching.

ARGET-ATRP synthesis and swelling response of compositionally varied poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) polyampholyte brushes

Modifying the composition of polyampholytes, which are comprised of charge-positive and charge-negative repeat units, directly contributes to trade-offs between charge and structure, which are externally regulated by solution pH and added salt. Here, the relative ratio of anionic and cationic comonomers is varied to tailor the stimuli-responsiveness of poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) (P(MAA-co-DEAEMA)) brushes to changes in solution pH and an added zwitterion. These systems display a strong dependence on excess repeating units of either type and the random incorporation appears to facilitate self-neutralization of charges. Pseudo-living growth with smooth comonomer incorporation is achieved using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP), creating well-defined brushes. In situ ellipsometry measurements of solvated brush thickness indicate that at low and high pH, the brushes display polyelectrolyte behavior with a strong compositional dependence, but at intermediate pH values, the brushes show the characteristic collapse attributed to self-neutralization of polyampholytes. The polyampholyte brushes maintain these patterns of behavior across all compositions and in the presence of an added zwitterion, which contributes additional hydrophobic character as evidenced by decreases in the swollen layer thicknesses. The response of the P(MAA-co-DEAEMA) brushes to the organic osmolyte betaine is consistent with its tendency to stabilize proteins and peptides in a kosmotropic fashion. These studies add perspective to efforts to manipulate sequence in polyampholytic polymers, support broader efforts to tailor interfacial soft films for applications in biotechnology and sensing, and understand aggregation and stability of biological polymers.

Tailoring Surface Properties through in Situ Functionality Gradients in Reactively Modified Poly(2-vinyl-4,4-dimethyl azlactone) Thin Films

Generating physical or chemical gradients in thin-film scaffolds is an efficient approach for screening and optimizing an interfacial structure or chemical functionality to create tailored surfaces that are useful because of their wetting, antifouling, or barrier properties. The relationship between the structure of poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA) brushes created by the preferential assembly of poly(glycidyl methacrylate)- block-PVDMA diblock copolymers and the ability to chemically modify the PVDMA chains in situ to create a gradient in functionality are examined to investigate how the extent of functionalization affects the interfacial and surface properties. The introduction of a chemical gradient by controlled immersion allows reactive modification to generate position-dependent properties that are assessed by ellipsometry, attenuated total reflectance-Fourier transform infrared spectroscopy, contact angle measurements, and atomic force microscopy imaging. After functionalization of the azlactone rings with n-alkyl amines, ellipsometry confirms an increase in thickness and contact angle measurements support an increase in hydrophobicity along the substrate. These results are used to establish relationships between layer thickness, reaction time, position, and the extent of functionalization and demonstrate that gradual immersion into the functionalizing solution results in a linear change in chemical functionality along the surface. These findings broadly support efforts to produce tailored surfaces by in situ chemical modification, having application as tailored membranes, protein resistant surfaces, or sensors.

Impact of Low Molecular Weight Poly(3-hexylthiophene)s as Additives in Organic Photovoltaic Devices

Despite tremendous progress in using additives to enhance the power conversion efficiency of organic photovoltaic devices, significant challenges remain in controlling the microstructure of the active layer, such as at internal donor-acceptor interfaces. Here, we demonstrate that the addition of low molecular weight poly(3-hexylthiophene)s (low-MW P3HT) to the P3HT/fullerene active layer increases device performance up to 36% over an unmodified control device. Low MW P3HT chains ranging in size from 1.6 to 8.0 kg/mol are blended with 77.5 kg/mol P3HT chains and [6,6]-phenyl C₆₁ butyric acid methyl ester (PCBM) fullerenes while keeping P3HT/PCBM ratio constant. Optimal photovoltaic device performance increases are obtained for each additive when incorporated into the bulk heterojunction blend at loading levels that are dependent upon additive MW. Small-angle X-ray scattering and energy-filtered transmission electron microscopy imaging reveal that domain sizes are approximately invariant at low loading levels of the low-MW P3HT additive, and wide-angle X-ray scattering suggests that P3HT crystallinity is unaffected by these additives. These results suggest that oligomeric P3HTs compatibilize donor-acceptor interfaces at low loading levels but coarsen domain structures at higher loading levels and they are consistent with recent simulations results. Although results are specific to the P3HT/PCBM system, the notion that low molecular weight additives can enhance photovoltaic device performance generally provides a new opportunity for improving device performance and operating lifetimes.

Solution self-assembly of poly(3-hexylthiophene)–poly(lactide) brush copolymers: impact of side chain arrangement

Solution self-assembly of P3HT-containing copolymers was tailored effectively via bottlebrush architecture, particularly by tuning its side chain arrangement as well as copolymer composition.

Nanoporous poly(3-hexylthiophene) thin film structures from self-organization of a tunable molecular bottlebrush scaffold

The ability to widely tune the design of macromolecular bottlebrushes provides access to self-assembled nanostructures formed by microphase segregation in melt, thin film and solution that depart from structures adopted by simple linear copolymers. A series of random bottlebrush copolymers containing poly(3-hexylthiophene) (P3HT) and poly(d,l-lactide) (PLA) side chains grafted on a poly(norbornene) backbone were synthesized via ring-opening metathesis polymerization (ROMP) using the grafting through approach. P3HT side chains induce a physical aggregation of the bottlebrush copolymers upon solvent removal by vacuum drying, primarily driven by attractive π-π interactions; however, the amount of aggregation can be controlled by adjusting side chain composition or by adding linear P3HT chains to the bottlebrush copolymers. Coarse-grained molecular dynamics simulations reveal that linear P3HT chains preferentially associate with P3HT side chains of bottlebrush copolymers, which tends to reduce the aggregation. The nanoscale morphology of microphase segregated thin films created by casting P3HT-PLA random bottlebrush copolymers is highly dependent on the composition of P3HT and PLA side chains, while domain spacing of nanostructures is mainly determined by the length of the side chains. The selective removal of PLA side chains under alkaline conditions generates nanoporous P3HT structures that can be tuned by manipulating molecular design of the bottlebrush scaffold, which is affected by molecular weight and grafting density of the side chains, and their sequence. The ability to exploit the unusual architecture of bottlebrushes to fabricate tunable nanoporous P3HT thin film structures may be a useful way to design templates for optoelectronic applications or membranes for separations.

Effect of amine content and chemistry on long-term, three-dimensional hepatocyte spheroid culture atop aminated elastin-like polypeptide coatings

Culture conditions that induce hepatic spheroidal aggregates sustain liver cells with metabolism that mimics in vivo hepatocytes. Here we present an array of elastin-like polypeptide conjugate coating materials (Aminated-ELPs) that are biocompatible, have spheroid-forming capacity, can be coated atop traditional culture surfaces, and maintain structural integrity while ensuring adherence of spheroids over long culture period. The Aminated-ELPs were synthesized either by direct conjugation of ELP and various polyelectrolytes or by conjugating both ELP and various small electrolytes to the reactive polymer poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA). Spheroid morphology, cellular metabolic function, and liver-specific gene expression over the long-term, 20-day culture period were assessed through optical microscopy, measurement of total protein content and albumin and urea production, and quantitative real-time (qRT) PCR. We found that the amine content of the Aminated-ELP coatings dictated the initial hepatocyte attachment, but not the subsequent hepatocyte spheroid formation and their continued attachment. A lower amine content was generally found to sustain higher albumin production by the spheroids. Out of the 19 Aminated-ELP coatings tested, we found that the lysine-containing substrates comprising ELP-polylysine or ELP-PVDMA-butanediamine proved to consistently culture productive spheroidal hepatocytes. We suggest that the incorporation of lysine functional groups in Aminated-ELP rendered more biocompatible surfaces, increasing spheroid attachment and leading to increased liver-specific function. Taken together, the Aminated-ELP array presented here has the potential to create in vitro hepatocyte culture models that mimic in vivo liver functionality and thus, lead to better understanding of liver pathophysiology and superior screening methods for drug efficacy and toxicity. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 377-388, 2017.

Petascale Simulations of the Morphology and the Molecular Interface of Bulk Heterojunctions

Understanding how additives interact and segregate within bulk heterojunction (BHJ) thin films is critical for exercising control over structure at multiple length scales and delivering improvements in photovoltaic performance. The morphological evolution of poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blends that are commensurate with the size of a BHJ thin film is examined using petascale coarse-grained molecular dynamics simulations. Comparisons between two-component and three-component systems containing short P3HT chains as additives undergoing thermal annealing demonstrate that the short chains alter the morphology in apparently useful ways: they efficiently migrate to the P3HT/PCBM interface, increasing the P3HT domain size and interfacial area. Simulation results agree with depth profiles determined from neutron reflectometry measurements that reveal PCBM enrichment near substrate and air interfaces but a decrease in that PCBM enrichment when a small amount of short P3HT chains are integrated into the BHJ blend. Atomistic simulations of the P3HT/PCBM blend interfaces show a nonmonotonic dependence of the interfacial thickness as a function of number of repeat units in the oligomeric P3HT additive, and the thiophene rings orient parallel to the interfacial plane as they approach the PCBM domain. Using the nanoscale geometries of the P3HT oligomers, LUMO and HOMO energy levels calculated by density functional theory are found to be invariant across the donor/acceptor interface. These connections between additives, processing, and morphology at all length scales are generally useful for efforts to improve device performance.

Reversible, voltage-activated formation of biomimetic membranes between triblock copolymer-coated aqueous droplets in good solvents

Biomimetic membranes assembled from block copolymers attract considerable interest because they exhibit greater stability and longetivity compared to lipid bilayers, and some enable the reconstitution of functional transmembrane biomolecules. Yet to-date, block copolymer membranes have not been achieved using the droplet interface bilayer (DIB) method, which uniquely allows assembling single- and multi-membrane networks between water droplets in oil. Herein, we investigate the formation of poly(ethylene oxide)-b-poly(dimethyl siloxane)-b-poly(ethylene oxide) triblock copolymer-stabilized interfaces (CSIs) between polymer-coated aqueous droplets in solutions comprising combinations of decane, hexadecane and AR20 silicone oil. We demonstrate that triblock-coated droplets do not spontaneously adhere in these oils because all are thermodynamically good solvents for the hydrophobic PDMS middle block. However, thinned planar membranes are reversibly formed at the interface between droplets upon the application of a sufficient transmembrane voltage, which removes excess solvent from between droplets through electrocompression. At applied voltages above the threshold required to initiate membrane thinning, electrowetting causes the area of the CSI between droplets to increase while thickness remains constant; the CSI electrowetting response is similar to that encountered with lipid-based DIBs. In combination, these results reveal that stable membranes can be assembled in a manner that is completely reversible when an external pressure is used to overcome a barrier to adhesion caused by solvent-chain interactions, and they demonstrate new capability for connecting and disconnecting aqueous droplets via polymer-stabilized membranes.

Synthesis of Main Chain Purine-Based Copolymers and Effects of Monomer Design on Thermal and Optical Properties

The ability to incorporate diverse monomeric building blocks enables the development of advanced polymeric materials possessing a wide range of properties that suits them for myriad applications. Herein, that synthetic toolbox is expanded through the first report of purine-based copolymers in which purines are incorporated directly into the polymer main chain. Stille cross-coupling of dibromopurine monomers with benzodithiophene (BDT) comonomers is used to generate these "poly(purine)s", and variations in the substitution pattern of the purine monomer and BDT side-chains provides insight into the role of monomer design on their resultant thermal and photophysical properties. Specifically, thermal analyses show that poly(purine)s exhibit high thermal stability and high glass transition temperatures depending on the BDT side-chain substituents and substitution pattern of the purine-derived comonomer. Furthermore, optical properties measured via UV-vis and fluorescence spectroscopies show dependence on monomer substitution pattern. These findings demonstrate the viability of synthesizing poly(purine)s via metal-catalyzed cross-coupling reactions and highlight the potential to tailor poly(purine) properties via simple alterations of comonomers.

Impact of chain microstructure on solution and thin film self-assembly of PCHD-based semi-flexible/flexible diblock copolymers

Self-assembly of semi-flexible/flexible block copolymers in a selective solvent is examined using a set of diblock copolymers where the chain microstructure of the semi-flexible block is manipulated in order to tune chain stiffness. Conceptually, the reduced conformational space of the semi-flexible block is anticipated to alter the way the chains pack, potentially changing the structure of self-assembled aggregates in comparison to flexible diblock copolymer analogs. Semi-flexible/flexible diblock copolymers comprised of poly(styrene)-block-poly(1,3-cyclohexadiene) (PS-b-PCHD) having systematic changes in chain microstructure, as captured by the ratio of 1,4/1,2-linkages between cyclohexenyl repeat units, and molecular weight of the PCHD blocks were synthesized using anionic polymerization. These diblocks were dissolved in tetrahydrofuran (THF), which is a preferential solvent for PS, and the structures formed were examined using laser light scattering and complementary imaging techniques. Results show that PS-b-PCHD copolymers with a chain microstructure of 90% 1,4/10% 1,2 linkages between cyclohexenyl repeat units (referred to simply as 90/10) are able to micellize, forming spherical structures, while diblocks of 70/30 and 50/50 1,4-to-1,2 ratios remain as single chains and ill-defined aggregates, respectively, when dissolved in THF. With inferences drawn from simple structural models, we speculate that this self-assembly behavior arises due to the change in the chain configuration with increasing content of 1,2-links in the backbone. This renders the chain with higher 1,2 content incapable of swelling in response to solvent and unable to pack into well-defined self-assembled structures.

In Situ Infrared Ellipsometry for Protein Adsorption Studies on Ultrathin Smart Polymer Brushes in Aqueous Environment

The protein-adsorbing and -repelling properties of various smart nanometer-thin polymer brushes containing poly(N-isopropylacrylamide) and poly(acrylic acid) with high potential for biosensing and biomedical applications are studied by in situ infrared-spectroscopic ellipsometry (IRSE). IRSE is a highly sensitive nondestructive technique that allows protein adsorption on polymer brushes to be investigated in an aqueous environment as external stimuli, such as temperature and pH, are varied. These changes are relevant to conditions for regulation of protein adsorption and desorption for biotechnology, biocatalysis, and bioanalytical applications. Here brushes are used as model surfaces for controlling protein adsorption of human serum albumin and human fibrinogen. The important finding of this work is that IRSE in the in situ experiments in protein solutions can distinguish between contributions of polymer brushes and proteins. The vibrational bands of the polymers provide insights into the hydration state of the brushes, whereas the protein-specific amide bands are related to changes of the protein secondary structure.

Structural Evolution of Polylactide Molecular Bottlebrushes: Kinetics Study by Size Exclusion Chromatography, Small Angle Neutron Scattering, and Simulations

Structural evolution from poly(lactide) (PLA) macromonomer to resultant PLA molecular bottlebrush during ring opening metathesis polymerization (ROMP) was investigated for the first time by combining size exclusion chromatography (SEC), small-angle neutron scattering (SANS), and coarse-grained molecular dynamics (CG-MD) simulations. Multiple aliquots were collected at various reaction times during ROMP and subsequently analyzed by SEC and SANS. These complementary techniques enable the understanding of systematic changes in conversion, molecular weight and dispersity as well as structural details of PLA molecular bottlebrushes. CG-MD simulation not only predicts the experimental observations, but it also provides further insight into the analysis and interpretation of data obtained in SEC and SANS experiments. We find that PLA molecular bottlebrushes undergo three conformational transitions with increasing conversion (i.e., increasing the backbone length): (1) from an elongated to a globular shape due to longer side chain at low conversion, (2) from a globular to an elongated shape at intermediate conversion caused by excluded volume of PLA side chain, and (3) the saturation of contour length at high conversion due to chain transfer reactions.

Process-controlled multiscale morphologies in metal-containing block copolymer thin films

Poly(styrene-block-ferrocenyldimethylsilane) (PS-b-PFS) is a metal-containing block copolymer that exhibits certain advantages as a scaffold for nanoporous membranes and as a mask for lithographic applications. These advantages include compatibility with a wide range of substrates, ease of control over domain morphologies and remarkable stability, which aid in the development of robust nanoporous networks or high-aspect-ratio patterns. An asymmetric cylinder-forming PS-b-PFS copolymer is subjected to different processing to manipulate the morphology of the phase-separated domains. Control of film structure and domain morphology is achieved by adjusting the film thickness, mode of annealing, and/or annealing time. Changing the process from thermal or solvent annealing to hybrid annealing (thermal and then solvent annealing in sequence) leads to the formation of mesoscale spherulitic and dendritic morphologies. In this communication, we show that reversing the order of the hybrid annealing (solvent annealing first and then thermal annealing) of relatively thick films (> 100 nm) on homogeneously thick substrates develops a discontinuous lamellar structure. Furthermore, the same processing applied on a substrate with a thin, mechanically flexible window in the center leads to the formation of sub-micron scale concentric ring patterns. Enhanced material mobility in the thick film during hybrid annealing along with dynamic rippling effects that may arise from the vibration of the thin window during spin casting are likely causes for these morphologies.

Spatial arrangement of organic compounds on a model mineral surface: implications for soil organic matter stabilization

The complexity of the mineral-organic carbon interface may influence the extent of stabilization of organic carbon compounds in soils, which is important for global climate futures. The nanoscale structure of a model interface was examined here by depositing films of organic carbon compounds of contrasting chemical character, hydrophilic glucose and amphiphilic stearic acid, onto a soil mineral analogue (Al2O3). Neutron reflectometry, a technique which provides depth-sensitive insight into the organization of the thin films, indicates that glucose molecules reside in a layer between Al2O3 and stearic acid, a result that was verified by water contact angle measurements. Molecular dynamics simulations reveal the thermodynamic driving force behind glucose partitioning on the mineral interface: The entropic penalty of confining the less mobile glucose on the mineral surface is lower than for stearic acid. The fundamental information obtained here helps rationalize how complex arrangements of organic carbon on soil mineral surfaces may arise.

Assembly and organization of poly(3-hexylthiophene) brushes and their potential use as novel anode buffer layers for organic photovoltaics

Buffer layers that control electrochemical reactions and physical interactions at electrode/film interfaces are key components of an organic photovoltaic cell. Here the structure and properties of layers of semi-rigid poly(3-hexylthiophene) (P3HT) chains tethered at a surface are investigated, and these functional systems are applied in an organic photovoltaic device. Areal density of P3HT chains is readily tuned through the choice of polymer molecular weight and annealing conditions, and insights from optical absorption spectroscopy and semiempirical quantum calculation methods suggest that tethering causes intrachain defects that affect co-facial π-stacking of brush chains. Because of their ability to modify oxide surfaces, P3HT brushes are utilized as an anode buffer layer in a P3HT-PCBM (phenyl-C₆₁-butyric acid methyl ester) bulk heterojunction device. Current-voltage characterization shows a significant enhancement in short circuit current, suggesting the potential of these novel nanostructured buffer layers to replace the PEDOT:PSS buffer layer typically applied in traditional P3HT-PCBM solar cells.

Lectin-functionalized poly(glycidyl methacrylate)-block-poly(vinyldimethyl azlactone) surface scaffolds for high avidity microbial capture

Microbial exopolysaccharides (EPS) play a critical and dynamic role in shaping the interactions between microbial community members and their local environment. The capture of targeted microbes using surface immobilized lectins that recognize specific extracellular oligosaccharide moieties offers a nondestructive method for functional characterization of EPS content. In this report, we evaluate the use of the block copolymer, poly(glycidyl methacrylate)-block-4,4-dimethyl-2-vinylazlactone (PGMA-b-PVDMA), as a surface scaffold for lectin-specific microbial capture. Three-dimensional polymer films were patterned on silicon substrates to provide discrete, covalent coupling sites for Triticum vulgare and Lens culinaris lectins. This material increased the number of Pseudomonas fluorescens microbes captured by up to 43% compared to control scaffolds that did not contain the copolymer. These results demonstrate that PGMA-b-PVDMA scaffolds provide a platform for improved microbe capture and screening of EPS content by combining high avidity lectin surfaces with three-dimensional surface topography.

Poly(3-hexylthiophene) Molecular Bottlebrushes via Ring-Opening Metathesis Polymerization: Macromolecular Architecture Enhanced Aggregation

We report a facile synthetic strategy based on a grafting through approach to prepare well-defined molecular bottlebrushes composed of regioregular poly(3-hexylthiophene) (rr-P3HT) as the conjugated polymeric side chain. To this end, the exo-norbornenyl-functionalized P3HT macromonomer was synthesized by Kumada catalyst transfer polycondensation (KCTP) followed by postpolymerization modifications, and the resulting conjugated macromonomer was successfully polymerized by ring-opening metathesis polymerization (ROMP) in a controlled manner. The P3HT molecular bottlebrushes display an unprecedented strong physical aggregation upon drying during recovery, as verified by several analyses of the solution and solid states. This remarkably strong aggregation behavior is attributed to a significant enhancement in the number of π-π interactions between grafted P3HT side chains, brought about due to the bottlebrush architecture. This behavior is qualitatively supported by coarse-grained molecular dynamics simulations.

Hydration in Weak Polyelectrolyte Brushes

Weak polyelectrolytes (PEs) are complex because intertwined connections between conformation and charge are regulated by the local dielectric environment. While end-tethered PE chains-so-called PE "brushes"-are archetypal systems for comprehending structure-property relationships, it is revealed that the reference state nominally referred to as "dry" is, in fact, a situation in which the chains are hydrated by water vapor in the ambient. Using charge-negative PE homopolymer brushes based on methacrylic acid and copolymer brushes that incorporate methacrylic acid and 2-hydroxyethylmethacrylate, we determine self-consistently the water content of PE films using neutron reflectometry under different hydration conditions. Modeling multiple data sets, we obtain dry polymer mass density and layer thickness, independent of adsorbed water, and PE brush profiles into different pH solutions. We show that hydration of the chains distorts, here by as much as 30%, the quantification of these important physical parameters benchmarked to films in ambient conditions.

Versatility of alkyne-modified poly(glycidyl methacrylate) layers for click reactions

Functional soft interfaces are of interest for a variety of technologies. We describe three methods for preparing substrates with alkyne groups, which show versatility for "click" chemistry reactions. Two of the methods have the same root: formation of thin, covalently attached, reactive interfacial layers of poly(glycidyl methacrylate) (PGMA) via spin coating onto silicon wafers followed by reactive modification with either propargylamine or 5-hexynoic acid. The amine or the carboxylic acid moieties react with the epoxy groups of PGMA, creating interfacial polymer layers decorated with alkyne groups. The third method consists of using copolymers comprising glycidyl methacrylate and propargyl methacrylate (pGP). The pGP copolymers are spin coated and covalently attached on silicon wafers. For each method, we investigate the factors that control film thickness and content of alkyne groups using ellipsometry, and study the nanophase structure of the films using neutron reflectometry. Azide-terminated polymers of methacrylic acid and 2-vinyl-4,4-dimethylazlactone synthesized via reversible addition-fragmentation chain transfer polymerization were attached to the alkyne-modified substrates using "click" chemistry, and grafting densities in the range of 0.007-0.95 chains nm(-2) were attained. The maximum density of alkyne groups attained by functionalization of PGMA with propargylamine or 5-hexynoic acid was approximately 2 alkynes nm(-3). The alkyne content obtained by the three decorating approaches was sufficiently high that it was not the limiting factor for the click reaction of azide-capped polymers.

Functionalized congeners of P2Y1 receptor antagonists: 2-alkynyl (N)-methanocarba 2'-deoxyadenosine 3',5'-bisphosphate analogues and conjugation to a polyamidoamine (PAMAM) dendrimer carrier

The P2Y(1) receptor is a prothrombotic G protein-coupled receptor (GPCR) activated by ADP. Preference for the North (N) ring conformation of the ribose moiety of adenine nucleotide 3',5'-bisphosphate antagonists of the P2Y(1) receptor was established by using a ring-constrained methanocarba (a bicyclo[3.1.0]hexane) ring as a ribose substitute. A series of covalently linkable N(6)-methyl-(N)-methanocarba-2'-deoxyadenosine-3',5'-bisphosphates containing extended 2-alkynyl chains was designed, and binding affinity at the human (h) P2Y(1) receptor determined. The chain of these functionalized congeners contained hydrophilic moieties, a reactive substituent, or biotin, linked via an amide. Variation of the chain length and position of an intermediate amide group revealed high affinity of carboxylic congener 8 (K(i) 23 nM) and extended amine congener 15 (K(i) 132 nM), both having a 2-(1-pentynoyl) group. A biotin conjugate 18 containing an extended epsilon-aminocaproyl spacer chain exhibited higher affinity than a shorter biotinylated analogue. Alternatively, click coupling of terminal alkynes of homologous 2-dialkynyl nucleotide derivatives to alkyl azido groups produced triazole derivatives that bound to the P2Y(1) receptor following deprotection of the bisphosphate groups. The preservation of receptor affinity of the functionalized congeners was consistent with new P2Y(1) receptor modeling and ligand docking. Attempted P2Y(1) antagonist conjugation to PAMAM dendrimer carriers by amide formation or palladium-catalyzed reaction between an alkyne on the dendrimer and a 2-iodopurine-derivatized nucleotide was unsuccessful. A dialkynyl intermediate containing the chain length favored in receptor binding was conjugated to an azide-derivatized dendrimer, and the conjugate inhibited ADP-promoted human platelet aggregation. This is the first example of attaching a strategically functionalized P2Y receptor antagonist to a PAMAM dendrimer to produce a multivalent conjugate exhibiting a desired biological effect, i.e., antithrombotic action.