Induction of notch signaling by immobilization of jagged-1 on self-assembled monolayers

Biomedical engineering approaches for the delivery of JAGGED1 as a potential tissue regenerative therapy

JAG1 is a ligand that activates the NOTCH signaling pathway which plays a crucial role in determining cell fate behavior through cell-to-cell signaling. JAG1-NOTCH signaling is required for mesenchymal stem cell (MSC) differentiation into cardiomyocytes and cranial neural crest (CNC) cells differentiation into osteoblasts, making it a regenerative candidate for clinical therapy to treat craniofacial bone loss and myocardial infarction. However, delivery of soluble JAG1 has been found to inhibit NOTCH signaling due to the requirement of JAG1 presentation in a bound form. For JAG1-NOTCH signaling to occur, JAG1 must be immobilized within a scaffold and the correct orientation between the NOTCH receptor and JAG1 must be achieved. The lack of clinically translatable JAG1 delivery methods has driven the exploration of alternative immobilization approaches. This review discusses the role of JAG1 in disease, the clinical role of JAG1 as a treatment, and summarizes current approaches for JAG1 delivery. An in-depth review was conducted on literature that used both in vivo and in vitro delivery models and observed the canonical versus non-canonical NOTCH pathway activated by JAG1. Studies were then compared and evaluated based on delivery success, functional outcomes, and translatability. Delivering JAG1 to harness its ability to control cell fate has the potential to serve as a therapeutic for many diseases.

Biophysical Regulations of Epigenetic State and Notch Signaling in Neural Development Using Microgroove Substrates

A number of studies have recently shown how surface topography can alter the behavior and differentiation patterns of different types of stem cells. Although the exact mechanisms and molecular pathways involved remain unclear, a consistent portion of the literature points to epigenetic changes induced by nuclear remodeling. In this study, we investigate the behavior of clinically relevant neural populations derived from human pluripotent stem cells when cultured on polydimethylsiloxane microgrooves (3 and 10 μm depth grooves) to investigate what mechanisms are responsible for their differentiation capacity and functional behavior. Our results show that microgrooves enhance cell alignment, modify nuclear geometry, and significantly increase cellular stiffness, which we were able to measure at high resolution with a combination of light and electron microscopy, scanning ion conductance microscopy (SICM), and atomic force microscopy (AFM) coupled with quantitative image analysis. The microgrooves promoted significant changes in the epigenetic landscape, as revealed by the expression of key histone modification markers. The main behavioral change of neural stem cells on microgrooves was an increase of neuronal differentiation under basal conditions on the microgrooves. Through measurements of cleaved Notch1 levels, we found that microgrooves downregulate Notch signaling. We in fact propose that microgroove topography affects the differentiation potential of neural stem cells by indirectly altering Notch signaling through geometric segregation and that this mechanism in parallel with topography-dependent epigenetic modulations acts in concert to enhance stem cell neuronal differentiation.

Immobilized DLL4-induced Notch signaling is mediated by dynamics of the actin cytoskeleton

Notch signaling, which is essential for tissue development and homeostasis, has received attention as an attractive target for cancer therapy, tissue engineering and regenerative medicine. For signal activation, the Notch receptor undergoes proteolysis after binding to its ligand. This process is mediated by a mechanical pulling force, and receptor trans-endocytosis is known to play a central role in supplying the force. On the other hand, Notch ligands immobilized on carrier materials also induce artificial Notch activation. However, the mechanism of signal activation by immobilized ligand proteins is not fully understood. Here, we found that the actin cytoskeleton in Notch1-expressing cells contributes to signal activation induced by immobilized DLL4 (Delta-like ligand 4), and the results showed that pharmacological inhibition of actin dynamics impaired Notch signaling induced by DLL4-coated beads. Moreover, inhibition of actin dynamics remarkably impaired cell migration and was correlated with Notch signaling activity. We also investigated the contribution of Notch cis-endocytosis (the endocytosis of Notch receptor into signal-receiving cells) as an actin-mediated cell biological process to further explore the mechanism of Notch activation by DLL4-coated beads. Compromising the receptor cis-endocytosis pathway with the dynamin inhibitor did not alter DLL4-coated bead-induced Notch signaling, indicating that signal activation is not mediated by dynamin-dependent receptor cis-endocytosis. These findings suggest that Notch activation by immobilized ligands is primarily driven by actin-based cell movement, which might supply a sufficient mechanical force for receptor cleavage, but not by receptor cis-endocytosis.

Engineering tissue morphogenesis: taking it up a Notch

Recreating functional tissues through bioengineering strategies requires steering of complex cell fate decisions. Notch, a juxtacrine signaling pathway, regulates cell fate and controls cellular organization with local precision. The engineering-friendly characteristics of the Notch pathway provide handles for engineering tissue patterning and morphogenesis. We discuss the physiological significance and mechanisms of Notch signaling with an emphasis on its potential use for engineering complex tissues. We highlight the current state of the art of Notch activation and provide a view on the design aspects, opportunities, and challenges in modulating Notch for tissue-engineering strategies. We propose that finely tuned control of Notch contributes to the generation of tissues with accurate form and functionality.

Artificial Notch Signaling Activation Method Using Immobilized Ligand Beads

Activation of Notch signaling requires physical interaction between ligand- and receptor-expressing cells and pulling force to release the Notch intracellular domain. Therefore, the soluble recombinant ligand protein is not suitable for the activation of Notch signaling in a cell culture system. Here, we describe an efficient method for transient activation of Notch signaling using immobilized ligand beads. Using this method, the timing of Notch signaling can be efficiently controlled.

Immobilization of Jagged1 Enhances Vascular Smooth Muscle Cells Maturation by Activating the Notch Pathway

In Notch signaling, the Jagged1-Notch3 ligand-receptor pairing is implicated for regulating the phenotype maturity of vascular smooth muscle cells. However, less is known about the role of Jagged1 presentation strategy in this regulation. In this study, we used bead-immobilized Jagged1 to direct phenotype control of primary human coronary artery smooth muscle cells (HCASMC), and to differentiate embryonic multipotent mesenchymal progenitor (10T1/2) cell towards a vascular lineage. This Jagged1 presentation strategy was sufficient to activate the Notch transcription factor HES1 and induce early-stage contractile markers, including smooth muscle α-actin and calponin in HCASMCs. Bead-bound Jagged1 was unable to regulate the late-stage markers myosin heavy chain and smoothelin; however, serum starvation and TGFβ1 were used to achieve a fully contractile smooth muscle cell. When progenitor 10T1/2 cells were used for Notch3 signaling, pre-differentiation with TGFβ1 was required for a robust Jagged1 specific response, suggesting a SMC lineage commitment was necessary to direct SMC differentiation and maturity. The presence of a magnetic tension force to the ligand-receptor complex was evaluated for signaling efficacy. Magnetic pulling forces downregulated HES1 and smooth muscle α-actin in both HCASMCs and progenitor 10T1/2 cells. Taken together, this study demonstrated that (i) bead-bound Jagged1 was sufficient to activate Notch3 and promote SMC differentiation/maturation and (ii) magnetic pulling forces did not activate Notch3, suggesting the bead alone was able to provide necessary clustering or traction forces for Notch activation. Notch is highly context-dependent; therefore, these findings provide insights to improve biomaterial-driven Jagged1 control of SMC behavior.

Designing Biomaterials to Modulate Notch Signaling in Tissue Engineering and Regenerative Medicine

The design of cell-instructive biomaterials for tissue engineering and regenerative medicine is at a crossroads. Although the conventional tissue engineering approach is top-down (cells seeded to macroporous scaffolds and mature to form tissues), bottom-up tissue engineering strategies are becoming appealing. With such developments, we can study cell signaling events, thus enabling functional tissue assembly in physiologic and diseased models. Among many important signaling pathways, the Notch signaling pathway is the most diverse in its influence during tissue morphogenesis and repair following injury. Although Notch signaling is extensively studied in developmental biology and cancer biology, our knowledge of designing biomaterial-based Notch signaling platforms and incorporating Notch signaling components into engineered tissue systems is limited. By incorporating Notch signaling to tissue engineering scaffolds, we can direct cell-specific responses and improve engineered tissue maturation. This review will discuss recent progress in the development of Notch signaling biomaterials as a promising target to control cellular fate decisions, including the influences of ligand identity, biophysical material cues, ligand presentation strategies, and mechanotransduction. Notch signaling is consequently of interest to direct, control, and reprogram cellular behavior on a biomaterial surface. We anticipate that discussions in this article will allow for enhanced knowledge and insight into designing Notch targeted biomaterials for various tissue engineering and cell fate determinations. Impact statement Notch signaling is recognized as an important pathway in tissue engineering and regenerative medicine; however, there is no systematic review on this topic. The comprehensive review and perspectives presented here provide an in-depth discussion on ligand presentation strategies both in 2D and in 3D cell culture environments involving biomaterials/scaffolds. In addition, this review article provides insight into the challenges in designing cell surrogate biomaterials capable of providing Notch signals. To the best of the authors' knowledge, this is the first review relevant to the fields of tissue engineering.

Prevention of urinary catheter-associated infections by coating antimicrobial peptides from crowberry endophytes

Urinary catheters are extensively used in hospitals, being responsible for about 75% of hospital-acquired infections. In this work, a de novo designed antimicrobial peptide (AMP) Chain201D was studied in the context of urinary catheter-associated infections. Chain201D showed excellent antimicrobial activity against relevant ATCC strains and clinical isolates of bacteria and yeast and demonstrated high stability in a wide range of temperatures, pH and salt concentrations. Moreover, the bactericidal activity of Chain201D immobilized on a model surface was studied against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), some of the most prevalent strains found in urinary catheter-associated infections. Chain201D was successfully tethered to ((1-mercapto-11-undecyl)-(tetra(ethylene glycol) (EG4)) terminated self-assembled monolayers (SAMs), (EG4-SAMs), activated by 1,1'-Carbonyldiimidazole (CDI) at different concentrations. Chain201D surfaces can bind and kill by contact a high percentage of adherent bacteria. These achievements are obtained without any peptide modification (for chemoselective conjugation) and without the use of a spacer. Moreover, increased amounts of immobilized AMP lead to higher numbers of adhered/dead bacteria, revealing a concentration-dependent behaviour and demonstrating that Chain201D has excellent potential for developing antimicrobial urinary catheters.

Spatial patterning of the Notch ligand Dll4 controls endothelial sprouting in vitro

Angiogenesis, the formation of new blood vessels, is a vital process for tissue growth and development. The Notch cell-cell signalling pathway plays an important role in endothelial cell specification during angiogenesis. Dll4 - Notch1 signalling directs endothelial cells into migrating tip or proliferating stalk cells. We used the directing properties of Dll4 to spatially control endothelial cell fate and the direction of endothelial sprouts. We created linear arrays of immobilized Dll4 using micro contact printing. HUVECs were seeded perpendicular to these Dll4 patterns using removable microfluidic channels. The Notch activating properties of surface immobilized Dll4 were confirmed by qPCR. After induction of sprouting, microscopic images of fluorescently labelled endothelial sprouts were analysed to determine the direction and the efficiency of controlled sprouting (Ecs). Directionality analysis of the sprouts showed the Dll4 pattern changes sprout direction from random to unidirectional. This was confirmed by the increase of Ecs from 54.5 ± 3.1% for the control, to an average of 84.7 ± 1.86% on the Dll4 patterned surfaces. Our data demonstrates a surface-based method to spatially pattern Dll4 to gain control over endothelial sprout location and direction. This suggests that spatial ligand patterning can be used to provide control over (neo) vascularization.

Stimulation of Notch Signaling in Mouse Osteoclast Precursors

Notch signaling is a key component of multiple physiological and pathological processes. The nature of Notch signaling, however, makes in vitro investigation of its varying and sometimes contradictory roles a challenge. As a component of direct cell-cell communication with both receptors and ligands bound to the plasma membrane, Notch signaling cannot be activated in vitro by simple addition of ligands to culture media, as is possible with many other signaling pathways. Instead, Notch ligands must be presented to cells in an immobilized state. Variations in methods of Notch signaling activation can lead to different outcomes in cultured cells. In osteoclast precursors, in particular, differences in methods of Notch stimulation and osteoclast precursor culture and differentiation have led to disagreement over whether Notch signaling is a positive or negative regulator of osteoclast differentiation. While closer comparisons of osteoclast differentiation under different Notch stimulation conditions in vitro and genetic models have largely resolved the controversy regarding Notch signaling and osteoclasts, standardized methods of continuous and temporary stimulation of Notch signaling in cultured cells could prevent such discrepancies in the future. This protocol describes two methods for stimulating Notch signaling specifically in cultured mouse osteoclast precursors, though these methods should be applicable to any adherent cell type with minor adjustments. The first method produces continuous stimulation of Notch signaling and involves immobilizing Notch ligand to a tissue culture surface prior to the seeding of cells. The second, which uses Notch ligand bound to agarose beads allows for temporary stimulation of Notch signaling in cells that are already adhered to a culture surface. This protocol also includes methods for detecting Notch activation in osteoclast precursors as well as representative transcriptional markers of Notch signaling activation.

Identification of Domains for Efficient Notch Signaling Activity in Immobilized Notch Ligand Proteins

Notch is a critical signaling pathway that controls cell fate and tissue homeostasis, but the functional characterization of Notch ligand domains that activate Notch receptors remains incomplete. Here, we established a method for immobilizing Notch ligand proteins onto beads to measure time-dependent Notch activity after the addition of Notch ligand-coated beads. A comparison between activities by the Notch ligand found on the cell surface to that of the ligand immobilized on beads showed that immobilized Notch ligand protein produces comparable signal activity during the first 10 h. Follow-up truncation studies showed that the N-terminal epidermal growth factor (EGF) repeat three region of delta like canonical Notch ligand 4 (DLL4) or jagged 1 (JAG1) is the minimum region for activating Notch signaling, and the DLL4 EGF repeat three domain may have a role in activation through a mechanism other than by increasing binding affinity. In addition, we found that reconstruction of the DLL4 delta and OSM-11 (DOS) motif (N257P) resulted in an increase in both binding affinity and signaling activity, which suggests that the role of the DOS motif is conserved among Notch ligands. Furthermore, active DLL4 protein on beads promoted T cell differentiation or inhibited B cell differentiation in vitro, whereas JAG1 proteins on beads did not have any effect. Taken together, our findings provide unambiguous evidence for the role of different Notch ligands and their domains in Notch signal activation, and may be potential tools for controlling Notch signaling activation. J. Cell. Biochem. 118: 785-796, 2017. © 2016 Wiley Periodicals, Inc.

Rational design of gold nanocarrier for the delivery of JAG-1 peptide

Background

Unique properties exhibited by nanoparticles makes them great candidates for applications in physics, chemistry, biology, material science and medicine. The biological applications of water-soluble gold nanoparticles range from contrast agents, delivery vehicles to therapeutics. Notch signaling is a complex network that orchestrates cell fate decisions, which involves proliferation, migration, differentiation and cell death in organisms ranging from insects to humans. Studies have showed that a correct orientation of the Jag-1 signalling protein on the substrates proves to be of great importance when promoting Jagged-1 Notch interactions, also the availability of the ligands, super cedes the importance of their concentration.

Results

The aim of the present study was to synthetize a Jag-1 functionalized nanocarrier, which would promote an efficient interaction between the Jag-1 peptide and the Notch receptor. To this end, two routes for gold nanoparticle-peptide assembly were investigated, and the synthetized bio-nanostructures were characterized and compared by means of UV–Vis, FT-IR, DLS and AFM techniques.

Conclusions

We have obtained a stable, monodisperse, hetero-functionalized GNP-PEG-JAG-1 bio-nanostructure for Notch pathway activation applications.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-015-0100-x) contains supplementary material, which is available to authorized users.

Therapeutic modulation of Notch signalling--are we there yet?

The Notch signalling pathway is evolutionarily conserved and is crucial for the development and homeostasis of most tissues. Deregulated Notch signalling leads to various diseases, such as T cell leukaemia, Alagille syndrome and a stroke and dementia syndrome known as CADASIL, and so strategies to therapeutically modulate Notch signalling are of interest. Clinical trials of Notch pathway inhibitors in patients with solid tumours have been reported, and several approaches are under preclinical evaluation. In this Review, we focus on aspects of the pathway that are amenable to therapeutic intervention, diseases that could be targeted and the various Notch pathway modulation strategies that are currently being explored.

Induction of myogenic differentiation of human mesenchymal stem cells cultured on Notch agonist (Jagged-1) modified biodegradable scaffold surface

Engineered scaffold surface provides stem cells with vital cues that could determine the eventual fate of stem cells. In this work, biodegradable poly(L-lactide-co-ε-caprolactone) (PLCL) scaffold conjugated with Notch agonist-Jagged-1(JAG) peptide (2.1 kDa) was prepared to initiate myogenic differentiation of human mesenchymal stem cells (hMSCs). The scaffold surface was activated with oxygen plasma and acrylic acid was engrafted via UV polymerization to form a surface bearing carboxylic groups. JAG peptide was subsequently immobilized onto the carboxylated scaffold surface. Surface chemistry and topography were examined using attenuated total reflection Fourier transform infrared, X-ray photoelectron spectroscopy, and atomic force microscopy. Quantitative real time polymerase chain reaction analysis revealed activation of the Notch pathway; furthermore, several specific markers associated with myogenic but not osteogenic differentiation were shown to be up-regulated in hMSCs cultured on the engineered surface. The pro-myocardial effect of surface bound JAG peptide was further affirmed via immunodetection of the distinct myocardial marker, cardiac troponin T. Collectively, our results suggest that PLCL conjugated JAG peptide is a viable strategy to enhance the functional potential of scaffolds to be used as a bioengineered cardiac patch in myocardial infarction repair.

Mesoporous silica nanoparticle-based substrates for cell directed delivery of Notch signalling modulators to control myoblast differentiation

Biochemical cues are critical to control stem cell function and can be utilized to develop smart biomaterials for stem cell engineering. The challenge is to deliver these cues in a restricted manner with spatial and temporal control. Here we have developed bilayer films of mesoporous silica nanoparticles for delayed cellular delivery of Notch modulators to promote muscle stem cell differentiation. We demonstrate that drug-loaded particles are internalized from the particle-covered surface, which allows for direct delivery of the drug into the cell and a delayed and confined drug release. Substrates of particles loaded with γ-secretase-inhibitors, which block the Notch signalling pathway, promoted efficient differentiation of myoblasts. The particle substrates were fully biocompatible and did not interfere with the inherent differentiation process. We further demonstrate that impregnating commercially available, biocompatible polymer scaffolds with MSNs allows for a free standing substrate for cell directed drug delivery.

Jagged1 immobilization to an osteoconductive polymer activates the Notch signaling pathway and induces osteogenesis

Treatment of nonunion fractures is a significant problem. Common therapeutics, including autologous bone grafts and bone morphogenetic proteins, show well-established limitations. Therefore, a need persists for the identification of novel clinical therapies to promote healing. The Notch signaling pathway regulates bone development. Clinically, loss-of-function mutations to the Notch ligand Jagged1 decrease bone mass and increase fracture risk. Jagged1 is also the most highly upregulated ligand during fracture repair, identifying it as a potential target to promote bone formation. Therefore, the objective of this study was to develop a clinically translatable construct comprised of Jagged1 and an osteoconductive scaffold, and characterize its activity in human mesenchymal stem cells (hMSC). We first evaluated the effects of Jagged1 directly immobilized to a novel poly(β-amino ester) relative to indirect coupling via antibody. Direct was more effective at activating hMSC Notch target gene expression and osteogenic activity. We then found that directly immobilized Jagged1 constructs induced osteoblast differentiation. This is the first study to demonstrate that Jagged1 delivery transiently activates Notch signaling and increases osteogenesis. A positive correlation was found between Jagged1-induced Notch and osteogenic expression. Collectively, these results indicate that Jagged1 coupled to an osteogenic biomaterial could promote bone tissue formation during fracture healing.

Fibrinogen promotes resorption of chitosan by human osteoclasts

The osteoconductive and osteoinductive properties of materials intended for bone regeneration have been extensively tested, but the resorbability of these materials is often overlooked. Osteoclasts are responsible for bone resorption and play a crucial role in bone remodeling, which is essential for complete regeneration of bone tissue following injury. In this study we compare, for the first time, the ability of unmodified and fibrinogen (Fg)-modified chitosan (Ch) substrates to support the formation of multinucleated osteoclasts, and the potential of these cells to resorb the two substrates in vitro. Osteoclasts were differentiated from primary human peripheral blood monocytes directly on the substrates being investigated. Our results showed similar cell adhesion to unmodified and Fg-modified Ch substrates. Although the number of multinucleated osteoclasts on both Ch substrates increased throughout the culture period, by 21 days of culture significantly more highly multinucleated osteoclasts (>10 nuclei per cell) were observed on Fg-modified Ch, when compared to Ch alone. In addition, cells were tartrate-resistant acid phosphatase positive and secreted significantly more enzyme on Ch-based substrates than in control conditions. Unmodified and Fg-modified Ch resorption was investigated by fluorescence microscopy and confirmed by electron microscopy. Quantification of results obtained by fluorescence microscopy shows that Fg modification led to significantly higher substrate resorption by 17 days of culture. Our results show that osteoclasts, beyond resorbing mineralized substrates, successfully resorb a polymeric substrate (Ch), with Fg accelerating this process. Thus, in bone tissue regeneration strategies employing polymeric biomaterials, resorption may depend not only on macrophages, but also on osteoclasts.

Chemically well-defined self-assembled monolayers for cell culture: toward mimicking the natural ECM

The extracellular matrix (ECM) is a network of biological macromolecules that surrounds cells within tissues. In addition to serving as a physical support, the ECM actively influences cell behavior by providing sites for cell adhesion, establishing soluble factor gradients, and forming interfaces between different cell types within a tissue. Thus, elucidating the influence of ECM-derived biomolecules on cell behavior is an important aspect of cell biology. Self-assembled monolayers (SAMs) have emerged as promising tools to mimic the ECM as they provide chemically well-defined substrates that can be precisely tailored for specific cell culture applications, and their application in this regard is the focus of this review. In particular, this review will describe various approaches to prepare SAM-based culture substrates via non-specific adsorption, covalent immobilization, or non-covalent sequestering of ECM-derived biomolecules. Additionally, this review will highlight SAMs that present ECM-derived biomolecules to cells to probe the role of these molecules in cell-ECM interactions, including cell attachment, spreading and 'outside-in' signaling via focal adhesion complex formation. Finally, this review will introduce SAMs that can present or sequester soluble signaling molecules, such as growth factors, to study the influence of localized soluble factor activity on cell behavior. Together, these examples demonstrate that the chemical specificity and variability afforded by SAMs can provide robust, well-defined substrates for cell culture that can simplify experimental design and analysis by eliminating many of the confounding factors associated with traditional culture substrates.

Enhanced mesenchymal stromal cell recruitment via natural killer cells by incorporation of inflammatory signals in biomaterials

An exacerbated inflammatory response questions biomaterial biocompatibility, but on the other hand, inflammation has a central role in the regulation of tissue regeneration. Therefore, it may be argued that an 'ideal' inflammatory response is crucial to achieve efficient tissue repair/regeneration. Natural killer (NK) cells, being one of the first populations arriving at an injury site, can have an important role in regulating bone repair/regeneration, particularly through interactions with mesenchymal stem/stromal cells (MSCs). Here, we studied how biomaterials designed to incorporate inflammatory signals affected NK cell behaviour and NK cell-MSC interactions. Adsorption of the pro-inflammatory molecule fibrinogen (Fg) to chitosan films led to a 1.5-fold increase in adhesion of peripheral blood human NK cells, without an increase in cytokine secretion. Most importantly, it was found that NK cells are capable of stimulating a threefold increase in human bone marrow MSC invasion, a key event taking place in tissue repair, but did not affect the expression of the differentiation marker alkaline phosphatase (ALP). Of significant importance, this NK cell-mediated MSC recruitment was modulated by Fg adsorption. Designing novel biomaterials leading to rational modulation of the inflammatory response is proposed as an alternative to current bone regeneration strategies.

Bioactivity of immobilized EGF on self-assembled monolayers: optimization of the immobilization process

Last trends in Biomaterials focus the mimic of cellular environments capable to control cellular responses. Epidermal growth factor (EGF) is a pleiotropic cytokine known to regulate cell proliferation, differentiation, and death. This study aims to optimize the immobilization of EGF on 11-mercapto-1-undecyl-tetra(ethylene)glycol (EG4)-self-assembled monolayers (SAMs) and to establish a new model surface to study EGF-mediated signaling. Gold substrates were modified with a monolayer of EG4 and N,N'-carbonyldiimidazole (CDI) was used to activate hydroxyl terminated groups of EG4-SAMs. EGF was then immobilized on activated EG4-SAMs at pH 7.4, 4 degrees C, and 100 rpm. Different immobilization reaction times were tested as well as different CDI concentrations to optimize the reaction conditions and obtain a range of immobilized EGF concentrations on the surfaces. Surface characterization of EGF-SAMs was performed using radiolabeling, water contact angle measurements, X-ray photoelectron spectroscopy, and ELISA. Phosphorylation of EGFR on BT-20 breast cancer cell line by EGF-SAMs was tested by immunostaining. EGF was successfully immobilized on EG4-SAMs, at 4 degrees C and pH 7.4 in a range of concentrations from 3.6 +/- 0.8 to 17.6 +/- 1.5 ng/cm(2). The concentration of EGF increases with immobilization time and with the CDI concentration reaching the maximum for surfaces activated with 30 mg/mL of CDI after 48 h. The bioactivity of EGF-SAMs was confirmed by immunostaining of phospho-EGFR of BT-20 cells. This study described EGF immobilization on EG4-SAMs at different concentrations, which could be important surface models to study specific protein interactions at the molecular level evolving EGF-family of proteins.