Phosphatidylserine immobilization of lentivirus for localized gene transfer

In situ-formable, dynamic crosslinked poly(ethylene glycol) carrier for localized adeno-associated virus infection and reduced off-target effects

The adeno-associated virus (AAV) is a potent vector for in vivo gene transduction and local therapeutic applications of AAVs, such as for skin ulcers, are expected. Localization of gene expression is important for the safety and efficiency of genetic therapies. We hypothesized that gene expression could be localized by designing biomaterials using poly(ethylene glycol) (PEG) as a carrier. Here we show one of the designed PEG carriers effectively localized gene expression on the ulcer surface and reduced off-target effects in the deep skin layer and the liver, as a representative organ to assess distant off-target effects, using a mouse skin ulcer model. The dissolution dynamics resulted in localization of the AAV gene transduction. The designed PEG carrier may be useful for in vivo gene therapies using AAVs, especially for localized expression.

Therapeutic delivery of nucleic acids for skin wound healing

Though wound care has advanced, treating chronic wounds remains a challenge and there are many clinical issues that must be addressed. Gene therapy is a recent approach to treating chronic wounds that remains in its developmental stage. The limited reports available describe the therapeutic applications of various forms of nucleic acid delivery for treating chronic wounds, including DNA, mRNA, siRNA, miRNA and so on. Though these bioactive molecules represent great therapeutic potential, sustaining their bioactivity in the wound bed is a challenge. To overcome this hurdle, delivery systems are also being widely investigated. In this review, nucleic acid-based therapy and its delivery for treating chronic wounds is discussed in detail.

Microencapsulated Multifunctionalized Graphene Oxide Equipped with Chloroquine for Efficient and Sustained siRNA Delivery

A multifunctionalized graphene oxide (GO)-based carrier with conjugation of aminated-polyethylene glycol (PEG-diamine), octaarginine (R8), and folic acid (FA), which also contains chloroquine (CQ), a lysosomotropic agent, is introduced. The cellular uptake mechanisms and intracellular targeting of FA-functionalized nanocarriers are examined. The localized releases of CQ and siRNA intracellular delivery are evaluated. Microencapsulation of the nanocarrier complexed with genes in layer-by-layer coating of alginate microbeads is also investigated. The covalently coconjugated FA with PEG and R8 provides a stable formulation with increased cellular uptake compared to FA-free carrier. The CQ-equipped nanocarrier shows a 95% release of CQ at lysosomal pH. The localized release of the drug inside the lysosomes is verified which accelerates the cargo discharge into cytoplasm.

Lentiviral Vectors Delivered with Biomaterials as Therapeutics for Spinal Cord Injury

Spinal cord injury (SCI) is a devastating trauma that can cause permanent disability, life-long chronic issues for sufferers and is a big socioeconomic burden. Regenerative medicine aims to overcome injury caused deficits and restore function after SCI through gene therapy and tissue engineering approaches. SCI has a multifaceted pathophysiology. Due to this, producing therapies that target multiple different cellular and molecular mechanisms might prove to be a superior approach in attempts at regeneration. Both biomaterials and nucleic acid delivery via lentiviral vectors (LVs) have proven to promote repair and restoration of function post SCI in animal models. Studies indicate that a combination of biomaterials and LVs is more effective than either approach alone. This review presents studies supporting the use of LVs and LVs delivered with biomaterials in therapies for SCI and summarises methods to combine LVs with biomaterials for SCI treatment. By summarising this knowledge this review aims to demonstrate how LV delivery with biomaterials can augment/compliment both LV and biomaterial therapeutic effects in SCI.

Injectable, macroporous scaffolds for delivery of therapeutic genes to the injured spinal cord

Biomaterials are being developed as therapeutics for spinal cord injury (SCI) that can stabilize and bridge acute lesions and mediate the delivery of transgenes, providing a localized and sustained reservoir of regenerative factors. For clinical use, direct injection of biomaterial scaffolds is preferred to enable conformation to unique lesions and minimize tissue damage. While an interconnected network of cell-sized macropores is necessary for rapid host cell infiltration into-and thus integration of host tissue with-implanted scaffolds, injectable biomaterials have generally suffered from a lack of control over the macrostructure. As genetic vectors have short lifetimes in vivo, rapid host cell infiltration into scaffolds is a prerequisite for efficient biomaterial-mediated delivery of transgenes. We present scaffolds that can be injected and assembled in situ from hyaluronic acid (HA)-based, spherical microparticles to form scaffolds with a network of macropores (∼10 μm). The results demonstrate that addition of regularly sized macropores to traditional hydrogel scaffolds, which have nanopores (∼10 nm), significantly increases the expression of locally delivered transgene to the spinal cord after a thoracic injury. Maximal cell and axon infiltration into scaffolds was observed in scaffolds with more regularly sized macropores. The delivery of lentiviral vectors encoding the brain-derived neurotrophic factor (BDNF), but not neurotrophin-3, from these scaffolds further increased total numbers and myelination of infiltrating axons. Modest improvements to the hindlimb function were observed with BDNF delivery. The results demonstrate the utility of macroporous and injectable HA scaffolds as a platform for localized gene therapies after SCI.

Is Viral Vector Gene Delivery More Effective Using Biomaterials?

Gene delivery has been extensively investigated for introducing foreign genetic material into cells to promote expression of therapeutic proteins or to silence relevant genes. This approach can regulate genetic or epigenetic disorders, offering an attractive alternative to pharmacological therapy or invasive protein delivery options. However, the exciting potential of viral gene therapy has yet to be fully realized, with a number of clinical trials failing to deliver optimal therapeutic outcomes. Reasons for this include difficulty in achieving localized delivery, and subsequently lower efficacy at the target site, as well as poor or inconsistent transduction efficiency. Thus, ongoing efforts are focused on improving local viral delivery and enhancing its efficiency. Recently, biomaterials have been exploited as an option for more controlled, targeted and programmable gene delivery. There is a growing body of literature demonstrating the efficacy of biomaterials and their potential advantages over other delivery strategies. This review explores current limitations of gene delivery and the progress of biomaterial-mediated gene delivery. The combination of biomaterials and gene vectors holds the potential to surmount major challenges, including the uncontrolled release of viral vectors with random delivery duration, poorly localized viral delivery with associated off-target effects, limited viral tropism, and immune safety concerns.

Efficient in situ gene delivery via PEG diacrylate matrices

For diseases related to genetic disorders or cancer, many cellular therapies rely on the ex vivo modification of cells for attaining a desired therapeutic effect. The efficacy of such therapies involving the genetic modification of cells relies on the extent of gene expression and subsequent persistence of modified cells when infused into the patient's body. In situ gene delivery implies the manipulation of cells in their in vivo niche such that the effectiveness can be improved by minimizing post manipulation effects like cell death, lack of persistence, etc. Furthermore, material-based in situ localized gene delivery can reduce the undesired side effects caused by systemic modifications. Here, we have used polyethylene (glycol) diacrylate (PEGDA) based cryogels to genetically modify cells in vivo with a focus on immunotherapy. PEGDA cryogels were either blended with gelatin methacrylate (GELMA) or surface modified with poly-l-lysine (PLL) in order to improve cell adhesion and/or retain viruses for localized gene delivery. On using the lentiviruses encoding gene for green fluorescent protein (GFP) in in vitro experiments, we found higher transduction efficiency in HEK 293FT cells via PEGDA modified with poly-l-lysine (PEGDA-PLL) and PEGDA-GELMA cryogels compared to PEGDA cryogels. In vitro release experiments showed improved retention of GFP lentiviruses in PEGDA-PLL cryogels, which were then employed for in vivo gene delivery and were demonstrated to perform better than the corresponding bolus delivery of lentiviruses through an injection. Both physical and biological characterization studies of these cryogels show that this material platform can be used for gene delivery as well as other tissue engineering applications.

Implementation of a stratified approach and gene immobilization to enhance the osseointegration of a silk-based ligament graft

A silk scaffold exhibits high potential for the human anterior cruciate ligament (ACL) reconstruction due to its exceptional mechanics as well as biocompatibility. Inefficient ACL interface restoration is thought to be a major hurdle for the common implementation of a silk-based ligament graft. By integrating a stratified approach and gene immobilization, here we developed a gene-immobilized triphasic silk scaffold to enhance ACL osseointegration. Isotropic silk was divided into three regions (respectively corresponding to a ligament, fibrocartilage and the bone region of the native ACL interface) using a custom-made divider, and the lentiviral vector-encoded transforming growth factor beta-3 (TGF-β3) and bone morphogenetic protein-2 (BMP2) was further, respectively, immobilized to phosphatidylserine (PS)-coated fibrocartilage and the bone region of the triphasic silk scaffold. The in vitro assessments displayed that this gene-immobilized triphasic silk scaffold significantly promotes bone marrow mesenchymal stem cell (BMSC) proliferation and differentiation into corresponding cell lineage. Moreover, the gene-modified triphasic silk scaffold combined with BMSCs alone, which was rolled into a compact shaft to be implanted onto rabbit ACL-defect models, revealed roughly complete osseointegration restoration as a result of apparent three-layered tissue formation and robust mechanical ability as early as 12 weeks postoperatively. These outcomes demonstrated that employing the stratified approach and gene immobilization efficiently expedites silk-mediated ACL interface formation, expanding the therapeutic potential of the silk-based ligament graft for ACL reconstruction.

Biomaterial-Guided Gene Delivery for Musculoskeletal Tissue Repair

Gene therapy is a promising strategy for musculoskeletal tissue repair and regeneration where local and sustained expression of proteins and/or therapeutic nucleic acids can be achieved. However, the musculoskeletal tissues present unique engineering and biological challenges as recipients of genetic vectors. Targeting specific cell populations, regulating expression in vivo, and overcoming the harsh environment of damaged tissue accompany the general concerns of safety and efficacy common to all applications of gene therapy. In this review, we will first summarize these challenges and then discuss how biomaterial carriers for genetic vectors can address these issues. Second, we will review how limitations specific to given vectors further motivate the utility of biomaterial carriers. Finally, we will discuss how these concepts have been combined with tissue engineering strategies and approaches to improve the delivery of these vectors for musculoskeletal tissue regeneration.

Impact of age and vector construct on striatal and nigral transgene expression

Therapeutic protein delivery using viral vectors has shown promise in preclinical models of Parkinson's disease (PD) but clinical trial success remains elusive. This may partially be due to a failure to include advanced age as a covariate despite aging being the primary risk factor for PD. We investigated transgene expression following intracerebral injections of recombinant adeno-associated virus pseudotypes 2/2 (rAAV2/2), 2/5 (rAAV2/5), 2/9 (rAAV2/9), and lentivirus (LV) expressing green fluorescent protein (GFP) in aged versus young adult rats. Both rAAV2/2 and rAAV2/5 yielded lower GFP expression following injection to either the aged substantia nigra or striatum. rAAV2/9-mediated GFP expression was deficient in the aged striatonigral system but displayed identical transgene expression between ages in the nigrostriatal system. Young and aged rats displayed equivalent GFP levels following LV injection to the striatonigral system but LV-delivered GFP was deficient in delivering GFP to the aged nigrostriatal system. Notably, age-related transgene expression deficiencies revealed by protein quantitation were poorly predicted by GFP-immunoreactive cell counts. Further, in situ hybridization for the viral CβA promoter revealed surprisingly limited tropism for astrocytes compared to neurons. Our results demonstrate that aging is a critical covariate to consider when designing gene therapy approaches for PD.

Investigation of angiogenesis in bioactive 3-dimensional poly(d,l-lactide-co-glycolide)/nano-hydroxyapatite scaffolds by in vivo multiphoton microscopy in murine calvarial critical bone defect

Reconstruction of critical size bone defects remains a major clinical challenge because of poor bone regeneration, which is usually due to poor angiogenesis during repair. Satisfactory vascularization is a prerequisite for the survival of grafts and the integration of new tissue with existing tissue. In this work, we investigated angiogenesis in 3D scaffolds by in vivo multiphoton microscopy during bone formation in a murine calvarial critical bone defect model and evaluated bone regeneration 8weeks post-implantation. The continuous release of bioactive lentiviral vectors (LV-pdgfb) from the scaffolds could be detected for 5days in vitro. In vivo, the released LV-pdgfb transfected adjacent cells and expressed PDGF-BB, facilitating angiogenesis and enhancing bone regeneration. The expression of both pdgfb and the angiogenesis-related genes vWF and VEGFR2 was significantly increased in the pdgfb gene-carrying scaffold (PHp) group. In addition, microCT scanning and histomorphology results proved that there was more new bone ingrowth in the PHp group than in the PLGA/nHA (PH) and control groups. MicroCT parameters, including BMD, BV/TV, Tb.Sp, and Tb.N indicated that there was significantly more new bone formation in the PHp group than in the other groups. With regard to neovascularization, 8weeks post-implantation, blood vessel areas (BVAs) were 9428±944μm(2), 4090±680.3μm(2), and none in the PHp, PH, and control groups, respectively. At each time point, BVAs in the PHp scaffolds were significantly higher than in the PH scaffolds. To our knowledge, this is the first use of multiphoton microscopy in bone tissue-engineering to investigate angiogenesis in scaffolds in vivo. This method represents a valuable tool for investigating neovascularization in bone scaffolds to determine if a certain scaffold is beneficial to neovascularization. We also proved that delivery of the pdgfb gene alone can improve both angiogenesis and bone regeneration Acronyms.

STATEMENT OF SIGNIFICANCE

Reconstruction of critical size bone defects remains a major clinical challenge because of poor bone regeneration, which is usually due to poor angiogenesis during repair. Satisfactory vascularization is a prerequisite for the survival of grafts and the integration of new tissue with existing tissue. In this work, we investigated angiogenesis in 3D scaffolds by in vivo multiphoton microscopy during bone formation in a murine calvarial critical bone defect model and evaluated bone regeneration 8weeks post-implantation. To verify that pdgfb-expressing vectors carried by the scaffolds can promote angiogenesis in 3D-printed scaffolds in vivo, we monitored angiogenesis within the implants by multiphoton microscopy. To our knowledge, this is the first study to dynamically investigate angiogenesis in bone tissue engineering scaffolds in vivo.

Reducing neuroinflammation by delivery of IL-10 encoding lentivirus from multiple-channel bridges

The spinal cord is unable to regenerate after injury largely due to growth‐inhibition by an inflammatory response to the injury that fails to resolve, resulting in secondary damage and cell death. An approach that prevents inhibition by attenuating the inflammatory response and promoting its resolution through the transition of macrophages to anti‐inflammatory phenotypes is essential for the creation of a growth permissive microenvironment. Viral gene delivery to induce the expression of anti‐inflammatory factors provides the potential to provide localized delivery to alter the host inflammatory response. Initially, we investigated the effect of the biomaterial and viral components of the delivery system to influence the extent of cell infiltration and the phenotype of these cells. Bridge implantation reduces antigen‐presenting cell infiltration at day 7, and lentivirus addition to the bridge induces a transient increase in neutrophils in the spinal cord at day 7 and macrophages at day 14. Delivery of a lentivirus encoding IL‐10, an anti‐inflammatory factor that inhibits immune cell activation and polarizes the macrophage population towards anti‐inflammatory phenotypes, reduced neutrophil infiltration at both day 7 and day 28. Though IL‐10 lentivirus did not affect macrophages number, it skewed the macrophage population toward an anti‐inflammatory M2 phenotype and altered macrophage morphology. Additionally, IL‐10 delivery resulted in improved motor function, suggesting reduced secondary damage and increased sparing. Taken together, these results indicate that localized expression of anti‐inflammatory factors, such as IL‐10, can modulate the inflammatory response following spinal cord injury, and may be a key component of a combinatorial approach that targets the multiple barriers to regeneration and functional recovery.

Gene delivery strategies to promote spinal cord repair

Gene therapies hold great promise for the treatment of many neurodegenerative disorders and traumatic injuries in the central nervous system. However, development of effective methods to deliver such therapies in a controlled manner to the spinal cord is a necessity for their translation to the clinic. Although essential progress has been made to improve efficiency of transgene delivery and reduce the immunogenicity of genetic vectors, there is still much work to be done to achieve clinical strategies capable of reversing neurodegeneration and mediating tissue regeneration. In particular, strategies to achieve localized, robust expression of therapeutic transgenes by target cell types, at controlled levels over defined time periods, will be necessary to fully regenerate functional spinal cord tissues. This review summarizes the progress over the last decade toward the development of effective gene therapies in the spinal cord, including identification of appropriate target genes, improvements to design of genetic vectors, advances in delivery methods, and strategies for delivery of multiple transgenes with synergistic actions. The potential of biomaterials to mediate gene delivery while simultaneously providing inductive scaffolding to facilitate tissue regeneration is also discussed.

Hydrogels to modulate lentivirus delivery in vivo from microporous tissue engineering scaffolds

Numerous strategies to induce tissue regeneration employ scaffolds to create space and present biological cues that promote development. In this report, microporous scaffolds that provide structural support were filled with hydrogels to regulate cell adhesion and migration and were investigated as delivery vehicles for gene therapy vectors in vivo. Porous scaffolds were filled with either lentivirus-entrapped collagen or fibrin hydrogels, both of which support cell adhesion yet have varied rates for degradation and cell infiltration. Empty scaffolds and alginate hydrogels were employed as controls, with the latter not supporting cell infiltration. Hydrogel-filled scaffolds retained the lentivirus more effectively than empty scaffolds, and transgene expression was observed for all scaffold conditions. Empty and fibrin-filled scaffolds had maximal transgene expression in vivo, followed by collagen and alginate, with similar levels. Transduced macrophages and dendritic cells were initially present at the scaffold boundary and adjacent tissue and within the scaffold at later time points for all but the alginate condition. At days 3 and 7, expression was also imaged throughout the spleen and thymus, which may result from cell migration from the implant. These studies demonstrate that hydrogels can modulate gene delivery from scaffolds used in cell transplantation and regenerative medicine.

Heparin-chitosan nanoparticle functionalization of porous poly(ethylene glycol) hydrogels for localized lentivirus delivery of angiogenic factors

Hydrogels have been extensively used for regenerative medicine strategies given their tailorable mechanical and chemical properties. Gene delivery represents a promising strategy by which to enhance the bioactivity of the hydrogels, though the efficiency and localization of gene transfer have been challenging. Here, we functionalized porous poly(ethylene glycol) hydrogels with heparin-chitosan nanoparticles to retain the vectors locally and enhance lentivirus delivery while minimizing changes to hydrogel architecture and mechanical properties. The immobilization of nanoparticles, as compared to homogeneous heparin and/or chitosan, is essential to lentivirus immobilization and retention of activity. Using this gene-delivering platform, we over-expressed the angiogenic factors sonic hedgehog (Shh) and vascular endothelial growth factor (Vegf) to promote blood vessel recruitment to the implant site. Shh enhanced endothelial recruitment and blood vessel formation around the hydrogel compared to both Vegf-delivering and control hydrogels. The nanoparticle-modified porous hydrogels for delivering gene therapy vectors can provide a platform for numerous regenerative medicine applications.

Immobilized lentivirus vector on chondroitin sulfate-hyaluronate acid-silk fibroin hybrid scaffold for tissue-engineered ligament-bone junction

The lack of a fibrocartilage layer between graft and bone remains the leading cause of graft failure after anterior cruciate ligament (ACL) reconstruction. The objective of this study was to develop a gene-modified silk cable-reinforced chondroitin sulfate-hyaluronate acid-silk fibroin (CHS) hybrid scaffold for reconstructing the fibrocartilage layer. The scaffold was fabricated by lyophilizing the CHS mixture with braided silk cables. The scanning electronic microscopy (SEM) showed that microporous CHS sponges were formed around silk cables. Each end of scaffold was modified with lentiviral-mediated transforming growth factor-β3 (TGF-β3) gene. The cells on scaffold were transfected by bonded lentivirus. In vitro culture demonstrated that mesenchymal stem cells (MSCs) on scaffolds proliferated vigorously and produced abundant collagen. The transcription levels of cartilage-specific genes also increased with culture time. After 2 weeks, the MSCs were distributed uniformly throughout scaffold. Deposited collagen was also found to increase. The chondral differentiation of MSCs was verified by expressions of collagen II and TGF-β3 genes in mRNA and protein level. Histology also confirmed the production of cartilage extracellular matrix (ECM) components. The results demonstrated that gene-modified silk cable-reinforced CHS scaffold was capable of supporting cell proliferation and differentiation to reconstruct the cartilage layer of interface.

Sonic hedgehog and neurotrophin-3 increase oligodendrocyte numbers and myelination after spinal cord injury

Spinal cord injury (SCI) results in loss of sensory and motor function below the level of injury and has limited available therapies. Multiple channel bridges have been investigated as a means to create a permissive environment for regeneration, with channels supporting axonal growth through the injury. Bridges support robust axon growth and myelination. Here, we investigated the cell types that myelinate axons in the bridges and whether over-expression of trophic factors can enhance myelination. Lentivirus encoding for neurotrophin-3 (NT3), sonic hedgehog (SHH) and the combination of these factors was delivered from bridges implanted into a lateral hemisection defect at T9/T10 in mice, and the response of endogenous progenitor cells within the spinal cord was investigated. Relative to control, the localized, sustained expression of these factors significantly increased growth of regenerating axons into the bridge and enhanced axon myelination 8 weeks after injury. SHH decreased the number of Sox2(+) cells and increased the number of Olig2(+) cells, whereas NT3 alone or in combination with SHH enhanced the numbers of GFAP(+) and Olig2(+) cells relative to control. For delivery of lentivirus encoding for either factor, we identified cells at various stages of differentiation along the oligodendrocyte lineage (e.g., O4(+), GalC(+)). Expression of NT3 enhanced myelination primarily by infiltrating Schwann cells, whereas SHH over-expression substantially increased myelination by oligodendrocytes. These studies further establish biomaterial-mediated gene delivery as a promising tool to direct activation and differentiation of endogenous progenitor cells for applications in regenerative medicine.

Scaffold-mediated lentiviral transduction for functional tissue engineering of cartilage

The ability to develop tissue constructs with matrix composition and biomechanical properties that promote rapid tissue repair or regeneration remains an enduring challenge in musculoskeletal engineering. Current approaches require extensive cell manipulation ex vivo, using exogenous growth factors to drive tissue-specific differentiation, matrix accumulation, and mechanical properties, thus limiting their potential clinical utility. The ability to induce and maintain differentiation of stem cells in situ could bypass these steps and enhance the success of engineering approaches for tissue regeneration. The goal of this study was to generate a self-contained bioactive scaffold capable of mediating stem cell differentiation and formation of a cartilaginous extracellular matrix (ECM) using a lentivirus-based method. We first showed that poly-L-lysine could immobilize lentivirus to poly(ε-caprolactone) films and facilitate human mesenchymal stem cell (hMSC) transduction. We then demonstrated that scaffold-mediated gene delivery of transforming growth factor β3 (TGF-β3), using a 3D woven poly(ε-caprolactone) scaffold, induced robust cartilaginous ECM formation by hMSCs. Chondrogenesis induced by scaffold-mediated gene delivery was as effective as traditional differentiation protocols involving medium supplementation with TGF-β3, as assessed by gene expression, biochemical, and biomechanical analyses. Using lentiviral vectors immobilized on a biomechanically functional scaffold, we have developed a system to achieve sustained transgene expression and ECM formation by hMSCs. This method opens new avenues in the development of bioactive implants that circumvent the need for ex vivo tissue generation by enabling the long-term goal of in situ tissue engineering.

Polysaccharide-modified scaffolds for controlled lentivirus delivery in vitro and after spinal cord injury

Gene delivering biomaterials have increasingly been employed to modulate the cellular microenvironment to promote tissue regeneration, yet low transduction efficiency has been a persistent challenge for in vivo applications. In this report, we investigated the surface modification of poly(lactide-co-glycolide) (PLG) scaffolds with polysaccharides, which have been implicated in binding lentivirus but have not been used for delivery. Chitosan was directly conjugated onto PLG scaffolds, whereas heparin and hyaluronan were indirectly conjugated onto PLG scaffolds with multi-amine crosslinkers. The addition of chitosan and heparin onto PLG promoted the association of lentivirus to these scaffolds and enhanced their transduction efficiency in vitro relative to hyaluronan-conjugated and control scaffolds that had limited lentivirus association and transduction. Transduction efficiency in vitro was increased partly due to an enhanced retention of virus on the scaffold as well as an extended half-life of viral activity. Transduction efficiency was also evaluated in vivo using porous, multiple channel PLG bridges that delivered lentivirus to the injured mouse spinal cord. Transgene expression persisted for weeks after implantation, and was able to enhance axon growth and myelination. These studies support gene-delivering PLG scaffolds for in vivo regenerative medicine applications.

A PLG/HAp composite scaffold for lentivirus delivery

Gene delivery from tissue engineering scaffolds provides the opportunity to control the microenvironment by inducing expression of regenerative factors. Hydroxyapatite (HAp) nanoparticles can bind lentivirus, and we investigated the incorporation of HAp into poly(lactide-co-glycolide) (PLG) scaffolds in order to retain lentivirus added to the scaffold. PLG/HAp scaffolds loaded with lentivirus enhanced transgene expression over 10-fold in vitro relative to scaffolds without HAp. Following in vivo implantation, PLG/HAp scaffolds promoted transgene expression for more than 100 days, with the level and duration enhanced relative to control scaffolds with lentivirus/HAp complexes added to PLG scaffolds. The extent of HAp incorporated into the scaffold influenced transgene expression, in part through its impact on porous architecture. Expression in vivo was localized to PLG/HAp scaffolds, with macrophages the primary cell type transduced at day 3, yet transduction of neutrophils and dendritic cells was also observed. At day 21 in PLG/HAp scaffolds, non-immune cells were transduced to a greater extent than immune cells, a trend that was opposite results from PLG scaffolds. Thus, in addition to retaining the virus, PLG/HAp influenced cell infiltration and preferentially transduced non-immune cells.

Biomaterial Scaffolds for Controlled, Localized Gene Delivery of Regenerative Factors

SIGNIFICANCE

Biomaterials play central roles in tissue regeneration by maintaining a space for tissue growth and facilitating its integration with the host. The regenerative capacity of materials can be enhanced through delivery of factors that promote tissue formation. Gene delivery is a versatile strategy to obtain sustained production of tissue inductive factors. Biomaterial scaffolds capable of gene delivery have been shown to induce transgene expression and tissue growth.

CRITICAL ISSUES

The widespread application of biomaterial scaffold systems requires identifying the design principles for the material and vectors that modulate transgene expression temporally and spatially. These technologies and others will ultimately enable spatial and temporal control over expression to recreate the cellular organization and gene expression required for formation of complex tissues.

RECENT ADVANCES

The design parameters for the biomaterials and vectors that modulate the extent and duration of transgene expression and the distribution of transgene-expressing cells within and around the injury are emerging. The cellular interactions with the biomaterial, such as adhesion or migration rate, can influence expression. Furthermore, modulating the interaction between the vector and biomaterial can control vector release while minimizing the exposure to harsh processing conditions.

FUTURE DIRECTIONS

Biomaterial scaffolds that deliver genes encoding for regenerative factors may provide a platform for regenerating complex tissues such as skin, blood vessels, and nerves. Biomaterials capable of localized gene delivery can synergistically target multiple cell processes and will have application to the regeneration of many tissues, with great promise for clinical therapies.

Advanced BMP gene therapies for temporal and spatial control of bone regeneration

Spatial and temporal patterns of bone morphogenetic protein (BMP) signaling are crucial to the assembly of appropriately positioned and shaped bones of the face and head. This review advances the hypothesis that reconstitution of such patterns with cutting-edge gene therapies will transform the clinical management of craniofacial bone defects attributed to trauma, disease, or surgical resection. Gradients in BMP signaling within developing limbs and orofacial primordia regulate proliferation and differentiation of mesenchymal progenitors. Similarly, vascular and mesenchymal cells express BMPs in various places and at various times during normal fracture healing. In non-healing fractures of long bones, BMP signaling is severely attenuated. Devices that release recombinant BMPs promote healing of bone in spinal fusions and, in some cases, of open fractures, but cannot control the timing and localization of BMP release. Gene therapies with regulated expression systems may provide substantial improvements in efficacy and safety compared with protein-based therapies. Synthetic gene switches, activated by pharmacologics or light or hyperthermic stimuli, provide several avenues for the non-invasive regulation of the expression of BMP transgenes in both time and space. Through new gene therapy platforms such as these, active control over BMP signaling can be achieved to accelerate bone regeneration.

Hydrogels for lentiviral gene delivery

INTRODUCTION

Gene delivery from hydrogel biomaterials provides a fundamental tool for a variety of clinical applications including regenerative medicine, gene therapy for inherited disorders and drug delivery. The high water content and mild gelation conditions of hydrogels support their use for gene delivery by preserving activity of lentiviral vectors and acting to shield vectors from any host immune response.

AREAS COVERED

Strategies to control lentiviral entrapment within and retention/release from hydrogels are reviewed. The authors discuss the ability of hydrogel design parameters to control the transgene expression profile and the capacity of hydrogels to protect vectors from (and even modulate) the host immune response.

EXPERT OPINION

Delivery of genetic vectors from scaffolds provides a unique opportunity to capitalize on the potential synergy between the biomaterial design for cell processes and gene delivery. Hydrogel properties can be tuned to directly control the events that determine the tissue response to controlled gene delivery, which include the extent of cell infiltration, preservation of vector activity and vector retention. While some design parameters have been identified, numerous opportunities for investigation are available in order to develop a complete model relating the biomaterial properties and host response to gene delivery.

Sustained, localized transgene expression mediated from lentivirus-loaded biodegradable polyester elastomers

The study of biomaterials for gene delivery in tissue engineering and regenerative medicine is a growing area, necessitating the investigation of new biomaterials and gene delivery vectors. Poly(1,8-octanediol citrate) (POC) and poly(glycerol-sebacate) (PGS) are biodegradable, biocompatible elastomers that have tunable mechanical properties, surface characteristics, and degradation rate. The objective of this work was to investigate whether POC and PGS would support the immobilization and release of lentivirus to allow sustained and localized transgene expression. Porous biomaterials were prepared using salt as a porogen, and in vitro and in vivo transgene expression from immobilized and released lentiviruses were assessed. Cells seeded onto biomaterials loaded with lentiviruses yielded titer-dependent transgene expression in vitro. Lentivirus activity on both biomaterials was maintained for at least 5 days. When implanted subcutaneously in rats, POC and PGS with immobilized lentivirus exhibited sustained and localized transgene expression for at least 5 weeks. This research demonstrates that lentivirus immobilization on POC and PGS is feasible and potentially useful for a variety of tissue engineering and regenerative medicine applications.

Hydrogel macroporosity and the prolongation of transgene expression and the enhancement of angiogenesis

The utility of hydrogels for regenerative medicine can be improved through localized gene delivery to enhance their bioactivity. However, current systems typically lead to low-level transgene expression located in host tissue surrounding the implant. Herein, we investigated the inclusion of macropores into hydrogels to facilitate cell ingrowth and enhance gene delivery within the macropores in vivo. Macropores were created within PEG hydrogels by gelation around gelatin microspheres, with gelatin subsequently dissolved by incubation at 37 °C. The macropores were interconnected, as evidenced by homogeneous cell seeding in vitro and complete cell infiltration in vivo. Lentivirus loaded within hydrogels following gelation retained its activity relative to the unencapsulated control virus. In vivo, macroporous PEG demonstrated sustained, elevated levels of transgene expression for 6 weeks, while hydrogels without macropores had transient expression. Transduced cells were located throughout the macroporous structure, while non-macroporous PEG hydrogels had transduction only in the adjacent host tissue. Delivery of lentivirus encoding for VEGF increased vascularization relative to the control, with vessels throughout the macropores of the hydrogel. The inclusion of macropores within the hydrogel to enhance cell infiltration enhances transduction and influences tissue development, which has implications for multiple regenerative medicine applications.

Fibrin hydrogels for lentiviral gene delivery in vitro and in vivo

Gene delivery from hydrogels represents a versatile approach for localized expression of tissue inductive factors that can promote cellular processes that lead to regeneration. Lentiviral gene therapy vectors were entrapped within fibrin hydrogels, either alone or complexed with hydroxylapatite (HA) nanoparticles. The inclusion of HA into the hydrogel led to the formation of small aggregates distributed throughout the hydrogel, with no obvious alteration of the pore structure outside the aggregates. The presence of HA slowed hydrogel degradation by collagenase and plasmin relative to fibrin alone, and also decreased the rate of cell migration. Lentivirus had similar release from the fibrin hydrogels formed with or without HA. The altered hydrogel properties suggest an interaction between the nanoparticle and fibrin, which may displace the virus from the particle leading to similar release profiles. Transgene expression by cells migrating into the hydrogel in vitro was reduced in the presence of HA, consistent with the role of cell migration on transgene expression. In vivo, lentivirus loaded fibrin hydrogels promoted localized transgene expression that increased through day 9 and decreased through day 14. For the fibrin only hydrogels, expression continued to decline after day 14. However, hydrogels with HA maintained this transgene expression level for an additional 2 weeks before declining. Immunostaining identified transgene primarily outside the fibrin-HA gel at day 9; however, at day 21, transgene expression was observed primarily within the fibrin-HA gel. The localized delivery of lentivirus provides an opportunity to enhance the bioactivity of fibrin hydrogels for a wide range of applications in regenerative medicine.

Elastin-like polypeptide matrices for enhancing adeno-associated virus-mediated gene delivery to human neural stem cells

The successful development of efficient and safe gene delivery vectors continues to be a major obstacle to gene delivery in stem cells. In this study, we have developed an elastin-like polypeptide (ELP)-mediated adeno-associated virus (AAV) delivery system for transducing fibroblasts and human neural stem cells (hNSCs). AAVs have significant promise as therapeutic vectors because of their safety and potential for use in gene targeting in stem cell research. ELP has been recently employed as a biologically inspired 'smart' biomaterial that exhibits an inverse temperature phase transition, thereby demonstrating promise as a novel drug carrier. The ELP that was investigated in this study was composed of a repetitive penta-peptide with [Val-Pro-Gly-Val-Gly]. A novel AAV variant, AAV r3.45, which was previously engineered by directed evolution to enhance transduction in rat NSCs, was nonspecifically immobilized onto ELPs that were adsorbed beforehand on a tissue culture polystyrene surface (TCPS). The presence of different ELP quantities on the TCPS led to variations in surface morphology, roughness and wettability, which were ultimately key factors in the modulation of cellular transduction. Importantly, with substantially reduced viral quantities compared with bolus delivery, ELP-mediated AAV delivery significantly enhanced delivery efficiency in fibroblasts and hNSCs, which have great potential for use in tissue engineering applications and neurodegenerative disorder treatments, respectively. The enhancement of cellular transduction in stem cells, as well as the feasibility of ELPs for utilization in three-dimensional scaffolds, will contribute to the advancement of gene therapy for stem cell research and tissue regenerative medicine.

Engineering biomaterial systems to enhance viral vector gene delivery

Integrating viral gene delivery with engineered biomaterials is a promising strategy to overcome a number of challenges associated with virus-mediated gene delivery, including inefficient delivery to specific cell types, limited tropism, spread of vectors to distant sites, and immune responses. Viral vectors can be combined with biomaterials either through encapsulation within the material or immobilization onto a material surface. Subsequent biomaterial-based delivery can increase the vector's residence time within the target site, thereby potentially providing localized delivery, enhancing transduction, and extending the duration of gene expression. Alternatively, physical or chemical modification of viral vectors with biomaterials can be employed to modulate the tropism of viruses or reduce inflammatory and immune responses, both of which may benefit transduction. This review describes strategies to promote viral gene delivery technologies using biomaterials, potentially providing opportunities for numerous applications of gene therapy to inherited or acquired disorders, infectious disease, and regenerative medicine.

Engineering fibrinogen-binding VSV-G envelope for spatially- and cell-controlled lentivirus delivery through fibrin hydrogels

We recently demonstrated that fibrin hydrogels can be used as vehicles for efficient lentivirus gene delivery. Gene transfer in fibrin gels was strongly dependent on matrix degradation by target cells but a fraction of lentiviral particles diffused out of the gels over time compromising spatial control of gene transfer. To overcome this challenge, we engineered lentiviral particles that bind covalently to fibrin during polymerization. To this end, we fused into the viral envelope glycoprotein (VSV-G) peptide domains that are recognized by factor XIII and protease cleavage sites that are recognized by plasmin. Lentivirus pseudotyped with the modified envelopes bound to fibrinogen in a factor XIII dose dependent manner and was released upon plasmin treatment. The peptide/VSV-G fusion envelope variants did not compromise the transduction efficiency of the resulting virus except when lacking any flexible linkers separating the peptide from the VSV-G envelope. Diffusion of virus from the gels decreased dramatically, especially at high concentrations of FXIII, even for fibrin gels with low fibrinogen concentration that were loaded with high titer virus. Lentivirus arrays prepared with fibrin-conjugated lentivirus yielded highly efficient gene transfer that was confined to virus-containing fibrin spots. As a result, signal/noise ratio increased and cross-contamination between neighboring sites was minimal. Finally, in addition to lentivirus microarrays this strategy may be used to achieve spatially-controlled gene transfer for therapeutic applications.