Biomimetic hybrid scaffolds for engineering human tooth-ligament interfaces

Biomimetic scaffold and 3D bioprinting in dental application: A review

Biomimetic scaffold and 3D bioprinting technologies have emerged as promising avenues in tissue engineering and regenerative medicine, offering innovative approaches to address the limitations of conventional tissue engineering methods. This review article provides a comprehensive overview of recent advancements, challenges, and future prospects in the field of biomimetic scaffold fabrication and 3D bioprinting techniques.

Biofabrication Strategies for Oral Soft Tissue Regeneration

Gingival recession, a prevalent condition affecting the gum tissues, is characterized by the exposure of tooth root surfaces due to the displacement of the gingival margin. This review explores conventional treatments, highlighting their limitations and the quest for innovative alternatives. Importantly, it emphasizes the critical considerations in gingival tissue engineering leveraging on cells, biomaterials, and signaling factors. Successful tissue-engineered gingival constructs hinge on strategic choices such as cell sources, scaffold design, mechanical properties, and growth factor delivery. Unveiling advancements in recent biofabrication technologies like 3D bioprinting, electrospinning, and microfluidic organ-on-chip systems, this review elucidates their precise control over cell arrangement, biomaterials, and signaling cues. These technologies empower the recapitulation of microphysiological features, enabling the development of gingival constructs that closely emulate the anatomical, physiological, and functional characteristics of native gingival tissues. The review explores diverse engineering strategies aiming at the biofabrication of realistic tissue-engineered gingival grafts. Further, the parallels between the skin and gingival tissues are highlighted, exploring the potential transfer of biofabrication approaches from skin tissue regeneration to gingival tissue engineering. To conclude, the exploration of innovative biofabrication technologies for gingival tissues and inspiration drawn from skin tissue engineering look forward to a transformative era in regenerative dentistry with improved clinical outcomes.

Unlocking the Future of Periodontal Regeneration: An Interdisciplinary Approach to Tissue Engineering and Advanced Therapeutics

Periodontal defects present a significant challenge in dentistry, necessitating innovative solutions for comprehensive regeneration. Traditional restoration methods have inherent limitations in achieving complete and functional periodontal tissue reconstruction. Tissue engineering, a multidisciplinary approach integrating cells, biomaterials, and bioactive factors, holds tremendous promise in addressing this challenge. Central to tissue engineering strategies are scaffolds, pivotal in supporting cell behavior and orchestrating tissue regeneration. Natural and synthetic materials have been extensively explored, each offering unique advantages in terms of biocompatibility and tunable properties. The integration of growth factors and stem cells further amplifies the regenerative potential, contributing to enhanced tissue healing and functional restoration. Despite significant progress, challenges persist. Achieving the seamless integration of regenerated tissues, establishing proper vascularization, and developing biomimetic scaffolds that faithfully replicate the natural periodontal environment are ongoing research endeavors. Collaborative efforts across diverse scientific disciplines are essential to overcoming these hurdles. This comprehensive review underscores the critical need for continued research and development in tissue engineering strategies for periodontal regeneration. By addressing current challenges and fostering interdisciplinary collaborations, we can unlock the full regenerative potential, paving the way for transformative advancements in periodontal care. This research not only enhances our understanding of periodontal tissues but also offers innovative approaches that can revolutionize dental therapies, improving patient outcomes and reshaping the future of periodontal treatments.

Melt electrowriting scaffolds with fibre-guiding features for periodontal attachment

Periodontal regeneration requires the re-attachment of oblique and perpendicular periodontal ligament (PDL) fibres to newly formed cementum and alveolar bone, which has proven elusive with existing approaches. In this study, multiple fibre-guiding biphasic tissue engineered constructs were fabricated by melt electrowriting. The biphasic scaffolds were 95 % porous and consisted of a pore size gradient bone compartment and periodontal compartment made of fibre-guiding channels with micro-architectural features ranging from 100 to 60 µm aimed to direct PDL fibre alignment and attachment. In vitro evaluations over 3 and 7 days demonstrated a marked improvement in collagen fibre orientation (over 60 % fully aligned) for scaffolds with micro-architecture ≤100 µm. The biphasic scaffolds were placed on a dentine slice and implanted ectopically, and this demonstrated that all micro-channels groups facilitated oblique and perpendicular alignment and attachment on the dentine with a mean nuclei angle and mean collagen fibre angle of approximately 60° resembling the native periodontal ligament attachment. A further in vivo testing using a surgically created rodent periodontal model highlighted the 80 µm micro-channel group's effectiveness, showing a significant increase in oblique PDL fibre attachment (72 %) and periodontal regeneration (56 %) when compared to all other groups onto the tooth root compared to control groups. Further to this, immunohistochemistry demonstrated the presence of periostin in the newly formed ligament indicating that functional regeneration occurred These findings suggest that scaffold micro-architectures of 100 µm or below can play a crucial role in directing periodontal tissue regeneration, potentially addressing a critical gap in periodontal therapy. STATEMENT OF SIGNIFICANCE: Periodontal regeneration remains a significant clinical challenge. Essential to restoring dental health and function is the proper attachment of the periodontal ligament, which is functionally oriented, to regenerated bone and cementum. Our research presents an innovative biphasic scaffold, utilizing Melt Electrowriting to systematically guide tissue growth. Distinct from existing methods, our scaffold is highly porous, adaptable, and precisely guides periodontal ligament fibre attachment to the opposing tooth root and alveolar bone interfaces, a critical step for achieving periodontal functional regeneration. Our findings not only bridge a significant gap in biomaterial driven tissue guidance but also promise more predictable outcomes for patients, marking a transformative advancement in the field.

Recent advances in additive manufacturing of patient-specific devices for dental and maxillofacial rehabilitation

OBJECTIVES

Customization and the production of patient-specific devices, tailoring the unique anatomy of each patient's jaw and facial structures, are the new frontiers in dentistry and maxillofacial surgery. As a technological advancement, additive manufacturing has been applied to produce customized objects based on 3D computerized models. Therefore, this paper presents advances in additive manufacturing strategies for patient-specific devices in diverse dental specialties.

METHODS

This paper overviews current 3D printing techniques to fabricate dental and maxillofacial devices. Then, the most recent literature (2018-2023) available in scientific databases reporting advances in 3D-printed patient-specific devices for dental and maxillofacial applications is critically discussed, focusing on the major outcomes, material-related details, and potential clinical advantages.

RESULTS

The recent application of 3D-printed customized devices in oral prosthodontics, implantology and maxillofacial surgery, periodontics, orthodontics, and endodontics are presented. Moreover, the potential application of 4D printing as an advanced manufacturing technology and the challenges and future perspectives for additive manufacturing in the dental and maxillofacial area are reported.

SIGNIFICANCE

Additive manufacturing techniques have been designed to benefit several areas of dentistry, and the technologies, materials, and devices continue to be optimized. Image-based and accurately printed patient-specific devices to replace, repair, and regenerate dental and maxillofacial structures hold significant potential to maximize the standard of care in dentistry.

Artificial Intelligence-Based 3D Printing Strategies for Bone Scaffold Fabrication and Its Application in Preclinical and Clinical Investigations

3D printing has become increasingly popular in the field of bone tissue engineering. However, the mechanical properties, biocompatibility, and porosity of the 3D printed bone scaffolds are major requirements for tissue regeneration and implantation as well. Designing the scaffold architecture in accordance with the need to create better mechanical and biological stimuli is necessary to achieve unique scaffold properties. To accomplish this, different 3D designing strategies can be utilized with the help of the scaffold design library and artificial intelligence (AI). The implementation of AI to assist the 3D printing process can enable it to predict, adapt, and control the parameters on its own, which lowers the risk of errors. This Review emphasizes 3D design and fabrication of bone scaffold using different materials and the use of AI-aided 3D printing strategies. Also, the adaption of AI to 3D printing helps to develop patient-specific scaffolds based on different requirements, thus providing feedback and adequate data for reproducibility, which can be improvised in the future. These printed scaffolds can also serve as an alternative to preclinical animal test models to cut costs and prevent immunological interference.

Engineering periodontal tissue interfaces using multiphasic scaffolds and membranes for guided bone and tissue regeneration

Periodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.

Nacre-like ceramic composites: Properties, functions and fabrication in the context of dental restorations

Dental restorations are in increasing demand, yet their success rate strongly decreases after 5-10 years post-implantation, attributed in part to mismatching properties with the surrounding buccal environment that causes failures and wear. Among current research to address this issue, biomimetic approaches are promising. Nacre-like ceramic composites are particularly interesting because they combine multiple antagonistic properties making them more resistant to failure in harsh environment than other materials. With the rapid progress in 3D printing producing nacre-like structures has open up new opportunities not yet realised. In this paper, nacre-like composites of various compositions are reviewed in the context of hypothetical biomimetic dental restorations. Their structural, functional and biological properties are compared with those of dentin, enamel, and bone to determine which composition would be the most suitable for each of the 3 mineralized regions found in teeth. The role of complex microstructures and mineral orientations are discussed as well as 3D printing methods that allow the design and fabrication of such complex architectures. Finally, usage of these processes and anticipated prospects for next generation biomimetic dental replacements are discussed to suggest future research directions in this area. STATEMENT OF SIGNIFICANCE: With the current ageing population, dental health is a major issue and current dental restorations still have shortcomings. For the next generation of dental restorations, more biomimetic approaches would be desirable to increase their durability. Among current materials, nacre-like ceramic composites are interesting because they can approach the various structural properties found in the different parts of our teeth. Furthermore, it is also possible to embed self-sensing functionalities to enable monitoring of oral health. Finally, new recent 3D printing technologies now permit the fabrication of complex shapes with local compositions and local microstructures. With this current status of the research, we anticipate new dental restorations designs and highlight the remaining gaps and issues to address.

Biocomposite-based strategies for dental bone regeneration

OBJECTIVE

Because of the anatomical complexity of the oral and maxillofacial sites, repairing bone defects in these regions is very difficult. This review article aims to consider the application of biocomposites-based strategies for dental bone regeneration.

STUDY DESIGN

Research papers related to the topic, published over the last 20 years, were selected using the Web of Science, Pubmed, Scopus, and Google Scholar databases.

RESULTS

The strategies of monophasic, biphasic/multiphasic scaffolds, and biopolymer-based nanocomposite scaffolds containing nanomaterials compared with traditional methods used for bone regeneration, such as autografts, allografts, xenografts, and alloplasts are found to be superior because of their ability to overcome the issues (e.g., limited bone sources, pain, immune responses, high cost) related to the applications of the traditional methods.

CONCLUSIONS

In addition, additive manufacturing technologies were found to be highly advantageous for improving the efficacy of biocomposite scaffolds for treating dental bone defects.

Personalized 3D-Printed Scaffolds with Multiple Bioactivities for Bioroot Regeneration

Recent advances in 3D printing offer a prospective avenue for producing transplantable human tissues with complex geometries; however, the appropriate 3D-printed scaffolds possessing the biological compatibility for tooth regeneration remain unidentified. This study proposes a personalized scaffold of multiple bioactivities, including induction of stem cell proliferation and differentiation, biomimetic mineralization, and angiogenesis. A brand-new bioink system comprising a biocompatible and biodegradable polymer is developed and reinforced with extracellular matrix generated from dentin tissue (treated dentin matrix, TDM). Adding TDM optimizes physical properties including microstructure, hydrophilicity, and mechanical strength of the scaffolds. Proteomics analysis reveals that the released proteins of the 3D-printed TDM scaffolds relate to multiple biological processes and interact closely with each other. Additionally, 3D-printed TDM scaffolds establish a favorable microenvironment for cell attachment, proliferation, and differentiation in vitro. The 3D-printed TDM scaffolds are proangiogenic and facilitate whole-thickness vascularization of the graft in a subcutaneous model. Notably, the personalized TDM scaffold combined with dental follicle cells mimics the anatomy and physiology of the native tooth root three months after in situ transplantation in beagles. The remarkable in vitro and in vivo outcomes suggest that the 3D-printed TDM scaffolds have multiple bioactivities and immense clinical potential for tooth-loss therapy.

Harnessing the Native Extracellular Matrix for Periodontal Regeneration Using a Melt Electrowritten Biphasic Scaffold

Scaffolds have been used to promote periodontal regeneration by providing control over the spacio-temporal healing of the periodontium (cementum, periodontal ligament (PDL) and alveolar bone). This study proposes to enhance the biofunctionality of a biphasic scaffold for periodontal regeneration by means of cell-laid extracellular matrix (ECM) decoration. To this end, a melt electrowritten scaffold was cultured with human osteoblasts for the deposition of bone-specific ECM. In parallel, periodontal ligament cells were used to form a cell sheet, which was later combined with the bone ECM scaffold to form a biphasic PDL-bone construct. The resulting biphasic construct was decellularised to remove all cellular components while preserving the deposited matrix. Decellularisation efficacy was confirmed in vitro, before the regenerative performance of freshly decellularised constructs was compared to that of 3-months stored freeze-dried scaffolds in a rodent periodontal defect model. Four weeks post-surgery, microCT revealed similar bone formation in all groups. Histology showed higher amounts of newly formed cementum and periodontal attachment in the fresh and freeze-dried ECM functionalised scaffolds, although it did not reach statistical significance. This study demonstrated that the positive effect of ECM decoration was preserved after freeze-drying and storing the construct for 3 months, which has important implications for clinical translation.

Three-dimensional-printed scaffolds for periodontal regeneration: A systematic review

Background

As current ethical codes preclude determining whether the clinical improvements obtained with the use of three-dimensional (3D)-printed scaffolds represent true periodontal regeneration, the histological proof of evidence for regeneration must be demonstrated in animal models. Thus, this systematic review investigated the regenerative potential of 3D-printed scaffolds in animal models of periodontal defects.

Materials and Methods

A systematic search was performed in four databases (Medline, Embase, Web of Science, and Scopus) to identify preclinical controlled studies that investigated the use of 3D-printed scaffolds for periodontal regeneration. Studies limited to periodontal defects treated with 3D scaffolds were eligible for inclusion. The primary outcome was periodontal regeneration, assessed histologically as new bone, cementum, and periodontal ligament (PDL). This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Quality was assessed according to the SRYCLE score.

Results

Six studies met the inclusion criteria. Scaffolds were designed using computer-aided design software. While the absence of a scaffold resulted in defects repaired mainly with fibrous connective tissue, the use of nonguiding 3D scaffolds promoted some bone formation. Notably, the regeneration of cementum and functional PDL fibers perpendicularly inserted into the root surface and the alveolar bone was limited to the defects treated with multi-compartment fiber-guiding or ion-containing 3D scaffolds. Nevertheless, the quality of the evidence was limited due to the unclear risk of bias.

Conclusions

Despite the limitations of the available evidence, the current data suggest that the use of printed multi-compartment fiber-guiding or ion-containing 3D scaffolds improves periodontal regeneration in animal models.

Ligaplants: Uprising Regimen in the Glebe of Implant Dentistry

A dental implant is an alloplastic framework inserted into the bone, either straight through the alveolar bone or beneath the mucosa or periosteum, to support and hold a permanent or removable dental prosthesis. Osseointegration is a striking phenomenon in which bone directly opposes the implant surface without any interposing collagen or fibroblastic matrix. Although titanium metallic implants were the subject of "osseointegration" at first, it is now used to refer to any biomaterial that can osseointegrate. The science of tissue engineering allows for regenerating complete biological components outside the body for possible replacement treatment or therapy. It uses cells, organic or synthetic scaffold materials, and bioactive molecules. The combination of periodontal ligament (PDL) cells with implant biomaterial is known as Ligaplants. When placed in regions with significant periodontal bone defects, ligaplants can promote the development of new bone. PDL implants, inserted into the missing teeth extraction socket, facilitate surgery. To protect the PDL cell cushion, ligaplants are fitted initially loosely. However, they firmly integrate without interlocking or making direct contact with the bones. Osseointegrated implants affixed directly to the alveolar bone encircling them cannot serve the same purpose as healthy teeth because natural periodontal tissue deteriorates over time. To create a biological connection capable of performing specific physiological tasks, a tissue-engineered PDL must be constructed in conjunction with a dental implant that is well thought out.

Guided Tissue and Bone Regeneration Membranes: A Review of Biomaterials and Techniques for Periodontal Treatments

This comprehensive review provides an in-depth analysis of the use of biomaterials in the processes of guided tissue and bone regeneration, and their indispensable role in dental therapeutic interventions. These interventions serve the critical function of restoring both structural integrity and functionality to the dentition that has been lost or damaged. The basis for this review is laid through the exploration of various relevant scientific databases such as Scopus, PubMed, Web of science and MEDLINE. From a meticulous selection, relevant literature was chosen. This review commences by examining the different types of membranes used in guided bone regeneration procedures and the spectrum of biomaterials employed in these operations. It then explores the manufacturing technologies for the scaffold, delving into their significant impact on tissue and bone regenerations. At the core of this review is the method of guided bone regeneration, which is a crucial technique for counteracting bone loss induced by tooth extraction or periodontal disease. The discussion advances by underscoring the latest innovations and strategies in the field of tissue regeneration. One key observation is the critical role that membranes play in guided reconstruction; they serve as a barrier, preventing the entry of non-ossifying cells, thereby promoting the successful growth and regeneration of bone and tissue. By reviewing the existing literature on biomaterials, membranes, and scaffold manufacturing technologies, this paper illustrates the vast potential for innovation and growth within the field of dental therapeutic interventions, particularly in guided tissue and bone regeneration.

Direct-Writing Electrospun Functionalized Scaffolds for Periodontal Regeneration: In Vitro Studies

Multiphasic scaffolds that combine different architectural, physical, and biological properties are the best option for the regeneration of complex tissues such as the periodontium. Current developed scaffolds generally lack architectural accuracy and rely on multistep manufacturing, which is difficult to implement for clinical applications. In this context, direct-writing electrospinning (DWE) represents a promising and rapid technique for developing thin 3D scaffolds with controlled architecture. The current study aimed to elaborate a biphasic scaffold using DWE based on two polycaprolactone solutions with interesting properties for bone and cement regeneration. One of the two scaffold parts contained hydroxyapatite nanoparticles (HAP) and the other contained the cementum protein 1 (CEMP1). After morphological characterizations, the elaborated scaffolds were assessed regarding periodontal ligament (PDL) cells in terms of cell proliferation, colonization, and mineralization ability. The results demonstrated that both HAP- and CEMP1-functionalized scaffolds were colonized by PDL cells and enhanced mineralization ability compared to unfunctionalized scaffolds, as revealed by alizarin red staining and OPN protein fluorescent expression. Taken together, the current data highlighted the potential of functional and organized scaffolds to stimulate bone and cementum regeneration. Moreover, DWE could be used to develop smart scaffolds with the ability to spatially control cellular orientation with suitable cellular activity at the micrometer scale, thereby enhancing periodontal and other complex tissue regeneration.

Biofabrication of engineered dento-alveolar tissue

Oral health is essential for a good overall health. Dento-alveolar conditions have a high prevalence, ranging from tooth decay periodontitis to alveolar bone resorption. However, oral tissues exhibit a limited regenerative capacity, and full recovery is challenging. Therefore, regenerative therapies for dento-alveolar tissue (e.g., alveolar bone, periodontal membrane, dentin-pulp complex) have gained much attention, and novel approaches have been proposed in recent decades. This review focuses on the cells, biomaterials and the biofabrication methods used to develop therapies for tooth root bioengineering. Examples of the techniques covered are the multitude of additive manufacturing techniques and bioprinting approaches used to create scaffolds or tissue constructs. Furthermore, biomaterials and stem cells utilized during biofabrication will also be described for different target tissues. As these new therapies gradually become a reality in the lab, the translation to the clinic is still minute, with a further need to overcome multiple challenges and broaden the clinical application of these alternatives.

Composite Graded Melt Electrowritten Scaffolds for Regeneration of the Periodontal Ligament-to-Bone Interface

Periodontitis is a ubiquitous chronic inflammatory, bacteria-triggered oral disease affecting the adult population. If left untreated, periodontitis can lead to severe tissue destruction, eventually resulting in tooth loss. Despite previous efforts in clinically managing the disease, therapeutic strategies are still lacking. Herein, melt electrowriting (MEW) is utilized to develop a compositionally and structurally tailored graded scaffold for regeneration of the periodontal ligament-to-bone interface. The composite scaffolds, consisting of fibers of polycaprolactone (PCL) and fibers of PCL-containing magnesium phosphate (MgP) were fabricated using MEW. To maximize the bond between bone (MgP) and ligament (PCL) regions, we evaluated two different fiber architectures in the interface area. These were a crosshatch pattern at a 0/90° angle and a random pattern. MgP fibrous scaffolds were able to promote in vitro bone formation even in culture media devoid of osteogenic supplements. Mechanical properties after MgP incorporation resulted in an increase of the elastic modulus and yield stress of the scaffolds, and fiber orientation in the interfacial zone affected the interfacial toughness. Composite graded MEW scaffolds enhanced bone fill when they were implanted in an in vivo periodontal fenestration defect model in rats. The presence of an interfacial zone allows coordinated regeneration of multitissues, as indicated by higher expression of bone, ligament, and cementoblastic markers compared to empty defects. Collectively, MEW-fabricated scaffolds having compositionally and structurally tailored zones exhibit a good mimicry of the periodontal complex, with excellent regenerative capacity and great potential as a defect-specific treatment strategy.

Biomimetic Peridontium Patches for Functional Periodontal Regeneration

The unique structure of the periodontium, including the alveolar bone, cementum, and periodontal ligament (PDL), presents difficulties for the regeneration of its intricate organization. Irreversible structural breakdown of the periodontium increases the risk of tooth loosening and loss. Although the current therapies can restore the periodontal hard tissues to a certain extent, the PDL with its high directionality of multiple groups with different orientations and functions cannot be reconstructed. Here, biomimetic peridontium patches (BPPs) for functional periodontal regeneration using a microscale continuous digital light projection bioprinting method is reported. Orthotopic transplantation in the mandibles shows effective periodontal reconstruction. The resulting bioengineered tissues closely resembles natural periodontium in terms of the "sandwich structures," especially the correctly oriented fibers, showing different and specific orientation in different regions of the tooth root, which has never been found in previous studies. Furthermore, after the assessment of clinically functional properties it is found that the regenerative periodontium can achieve stable tooth movement under orthodontic migration force with no adverse consequences. Overall, the BPPs promote reconstruction of the functional periodontium and the complex microstructure of the periodontal tissue, providing a proof of principle for the clinical functional treatment of periodontal defects.

Clinical and patient-reported outcomes of tissue engineering strategies for periodontal and peri-implant reconstruction

Scientific advancements in biomaterials, cellular therapies, and growth factors have brought new therapeutic options for periodontal and peri-implant reconstructive procedures. These tissue engineering strategies involve the enrichment of scaffolds with living cells or signaling molecules and aim at mimicking the cascades of wound healing events and the clinical outcomes of conventional autogenous grafts, without the need for donor tissue. Several tissue engineering strategies have been explored over the years for a variety of clinical scenarios, including periodontal regeneration, treatment of gingival recessions/mucogingival conditions, alveolar ridge preservation, bone augmentation procedures, sinus floor elevation, and peri-implant bone regeneration therapies. The goal of this article was to review the tissue engineering strategies that have been performed for periodontal and peri-implant reconstruction and implant site development, and to evaluate their safety, invasiveness, efficacy, and patient-reported outcomes. A detailed systematic search was conducted to identify eligible randomized controlled trials reporting the outcomes of tissue engineering strategies utilized for the aforementioned indications. A total of 128 trials were ultimately included in this review for a detailed qualitative analysis. Commonly performed tissue engineering strategies involved scaffolds enriched with mesenchymal or somatic cells (cell-based tissue engineering strategies), or more often scaffolds loaded with signaling molecules/growth factors (signaling molecule-based tissue engineering strategies). These approaches were found to be safe when utilized for periodontal and peri-implant reconstruction therapies and implant site development. Tissue engineering strategies demonstrated either similar or superior clinical outcomes than conventional approaches for the treatment of infrabony and furcation defects, alveolar ridge preservation, and sinus floor augmentation. Tissue engineering strategies can promote higher root coverage, keratinized tissue width, and gingival thickness gain than scaffolds alone can, and they can often obtain similar mean root coverage compared with autogenous grafts. There is some evidence suggesting that tissue engineering strategies can have a positive effect on patient morbidity, their preference, esthetics, and quality of life when utilized for the treatment of mucogingival deformities. Similarly, tissue engineering strategies can reduce the invasiveness and complications of autogenous graft-based staged bone augmentation. More studies incorporating patient-reported outcomes are needed to understand the cost-benefits of tissue engineering strategies compared with traditional treatments.

Bioprinting and biomaterials for dental alveolar tissue regeneration

Three dimensional (3D) bioprinting is a powerful tool, that was recently applied to tissue engineering. This technique allows the precise deposition of cells encapsulated in supportive bioinks to fabricate complex scaffolds, which are used to repair targeted tissues. Here, we review the recent developments in the application of 3D bioprinting to dental tissue engineering. These tissues, including teeth, periodontal ligament, alveolar bones, and dental pulp, present cell types and mechanical properties with great heterogeneity, which is challenging to reproduce in vitro. After highlighting the different bioprinting methods used in regenerative dentistry, we reviewed the great variety of bioink formulations and their effects on cells, which have been established to support the development of these tissues. We discussed the different advances achieved in the fabrication of each dental tissue to provide an overview of the current state of the methods. We conclude with the remaining challenges and future needs.

Strategies of cell and cell-free therapies for periodontal regeneration: the state of the art

BACKGROUND

Periodontitis often causes irrevocable destruction of tooth-supporting tissues and eventually leads to tooth loss. Currently, stem cell-based tissue engineering has achieved a favorable result in regenerating periodontal tissues. Moreover, cell-free therapies that aim to facilitate the recruitment of resident repair cell populations to injured sites by promoting cell mobilization and homing have become alternative options to cell therapy.

MAIN TEXT

Cell aggregates (e.g., cell sheets) retain a large amount of extracellular matrix which can improve cell viability and survival rates after implantation in vivo. Electrostatic spinning and 3D bioprinting through fabricating specific alignments and interactions scaffold structures have made promising outcomes in the construction of a microenvironment conducive to periodontal regeneration. Cell-free therapies with adding biological agents (growth factors, exosomes and conditioned media) to promote endogenous regeneration have somewhat addressed the limitations of cell therapy.

CONCLUSION

Hence, this article reviews the progress of stem cell-based tissue engineering and advanced strategies for endogenous regeneration based on stem cell derivatives in periodontal regeneration.

Engineering Dental Tissues Using Biomaterials with Piezoelectric Effect: Current Progress and Future Perspectives

Dental caries and traumatic injuries to teeth may cause irreversible inflammation and eventual death of the dental pulp. Nevertheless, predictably, repair and regeneration of the dentin-pulp complex remain a formidable challenge. In recent years, smart multifunctional materials with antimicrobial, anti-inflammatory, and pro-regenerative properties have emerged as promising approaches to meet this critical clinical need. As a unique class of smart materials, piezoelectric materials have an unprecedented advantage over other stimuli-responsive materials due to their inherent capability to generate electric charges, which have been shown to facilitate both antimicrobial action and tissue regeneration. Nonetheless, studies on piezoelectric biomaterials in the repair and regeneration of the dentin-pulp complex remain limited. In this review, we summarize the biomedical applications of piezoelectric biomaterials in dental applications and elucidate the underlying molecular mechanisms contributing to the biological effect of piezoelectricity. Moreover, we highlight how this state-of-the-art can be further exploited in the future for dental tissue engineering.

Layered scaffolds in periodontal regeneration

Periodontitis is a common inflammatory disease in dentistry that may lead to tooth loss and aesthetic problems. Periodontal tissue has a sophisticated architecture including four sections of alveolar bone, cementum, gingiva, and periodontal ligament fiber; all these four can be damaged during periodontitis. Thus, for whole periodontal regeneration, it is important to form both hard and soft tissue structures simultaneously on the tooth root surface without forming junctional epithelium and ankylosis. This condition makes the treatment of the periodontium a challenging process. Various regenerative methods including Guided Bone/Tissue Regeneration (GBR/GTR) using various membranes have been developed. Although using such GBR/GTR membranes was successful for partial periodontal treatment, they cannot be used for the regeneration of complete periodontium. For this purpose, multilayered scaffolds are now being developed. Such scaffolds may include various biomaterials, stem cells, and growth factors in a multiphasic configuration in which each layer is designed to regenerate specific section of the periodontium. This article provides a comprehensive review of the multilayered scaffolds for periodontal regeneration based on natural or synthetic polymers, and their combinations with other biomaterials and bioactive molecules. After highlighting the challenges related to multilayered scaffolds preparation, features of suitable scaffolds for periodontal regeneration are discussed.

Multicompartmental Scaffolds for Coordinated Periodontal Tissue Engineering

Successful periodontal repair and regeneration requires the coordinated responses from soft and hard tissues as well as the soft tissue-to-bone interfaces. Inspired by the hierarchical structure of native periodontal tissues, tissue engineering technology provides unique opportunities to coordinate multiple cell types into scaffolds that mimic the natural periodontal structure in vitro. In this study, we designed and fabricated highly ordered multicompartmental scaffolds by melt electrowriting, an advanced 3-dimensional (3D) printing technique. This strategy attempted to mimic the characteristic periodontal microenvironment through multicompartmental constructs comprising 3 tissue-specific regions: 1) a bone compartment with dense mesh structure, 2) a ligament compartment mimicking the highly aligned periodontal ligaments (PDLs), and 3) a transition region that bridges the bone and ligament, a critical feature that differentiates this system from mono- or bicompartmental alternatives. The multicompartmental constructs successfully achieved coordinated proliferation and differentiation of multiple cell types in vitro within short time, including both ligamentous- and bone-derived cells. Long-term 3D coculture of primary human osteoblasts and PDL fibroblasts led to a mineral gradient from calcified to uncalcified regions with PDL-like insertions within the transition region, an effect that is challenging to achieve with mono- or bicompartmental platforms. This process effectively recapitulates the key feature of interfacial tissues in periodontium. Collectively, this tissue-engineered approach offers a fundament for engineering periodontal tissue constructs with characteristic 3D microenvironments similar to native tissues. This multicompartmental 3D printing approach is also highly compatible with the design of next-generation scaffolds, with both highly adjustable compartmentalization properties and patient-specific shapes, for multitissue engineering in complex periodontal defects.

Type-2 epithelial-mesenchymal transition in oral mucosal nonneoplastic diseases

The oral mucosa is a membranous structure comprising epithelial and connective tissue that covers the oral cavity. The oral mucosa is the first immune barrier to protect the body against pathogens for systemic protection. It is frequently exposed to mechanical abrasion, chemical erosion, and pathogenic invasion, resulting in oral mucosal lesions, particularly inflammatory diseases. Epithelial-mesenchymal transition (EMT) is a crucial biological process in the pathogenesis of oral mucosal disorders, which are classified into three types (types 1, 2, and 3) based on their physiological consequences. Among these, type-2 EMT is crucial in wound repair, organ fibrosis, and tissue regeneration. It causes infectious and dis-infectious immunological diseases, such as oral lichen planus (OLP), oral leukoplakia, oral submucosal fibrosis, and other precancerous lesions. However, the mechanism and cognition between type-2 EMT and oral mucosal inflammatory disorders remain unknown. This review first provides a comprehensive evaluation of type-2 EMT in chronically inflammatory oral mucosal disorders. The aim is to lay a foundation for future research and suggest potential treatments.

Biomaterials for Periodontal Regeneration

As a widespread chronical disease, periodontitis progressively destroys tooth-supporting structures (periodontium) and eventually leads to tooth loss. Therefore, regeneration of damaged/lost periodontal tissues has been a major subject in periodontal research. During periodontal tissue regeneration, biomaterials play pivotal roles in improving the outcome of the periodontal therapy. With the advancement of biomaterial science and engineering in recent years, new biomimetic materials and scaffolding fabrication technologies have been proposed for periodontal tissue regeneration. This article summarizes recent progress in periodontal tissue regeneration from a biomaterial perspective. First, various guide tissue regeneration/guide bone regeneration membranes and grafting biomaterials for periodontal tissue regeneration are overviewed. Next, the recent development of multifunctional scaffolding biomaterials for alveolar bone/periodontal ligament/cementum regeneration is summarized. Finally, clinical care points and perspectives on the use of biomimetic scaffolding materials to reconstruct the hierarchical periodontal tissues are provided.

3D Printed and Bioprinted Membranes and Scaffolds for the Periodontal Tissue Regeneration: A Narrative Review

Numerous technologies and materials were developed with the aim of repairing and reconstructing the tissue loss in patients with periodontitis. Periodontal guided bone regeneration (GBR) and guided tissue regeneration (GTR) involves the use of a membrane which prevents epithelial cell migration, and helps to maintain the space, creating a protected area in which tissue regeneration is favored. Over the time, manufacturing procedures of such barrier membranes followed important improvements. Three-dimensional (3D) printing technology has led to major innovations in periodontal regeneration methods, using technologies such as inkjet printing, light-assisted 3D printing or micro-extrusion. Besides the 3D printing of monophasic and multi-phasic scaffolds, bioprinting and tissue engineering have emerged as innovative technologies which can change the way we see GTR and GBR.

Fibre-guiding biphasic scaffold for perpendicular periodontal ligament attachment

Periodontal regeneration is characterized by the attachment of oblique periodontal ligament fibres on the tooth root surface. To facilitate periodontal ligament attachment, a fibre-guiding tissue engineered biphasic construct was manufactured by melt electrowriting (MEW) for influencing reproducible cell guidance and tissue orientation. The biphasic scaffold contained fibre-guiding features in the periodontal ligament component comprising of 100 µm spaced channels (100CH), a pore size gradient in the bone component and maintained a highly porous and fully interconnected interface between the compartments. The efficacy of the fibre-guiding channels was assessed in an ectopic periodontal attachment model in immunocompromised rats. This demonstrated an unprecedented and systematic tissue alignment perpendicular to the dentin in the 100CH group, resulting in the close mimicry of native periodontal ligament architecture. In addition, the histology revealed high levels of tissue integration between the two compartments as observed by the perpendicular collagen attachment on the dentin surface, which also extended and infiltrated the scaffold's bone compartment. In conclusion, the 100 µm fibre-guiding scaffold induced a systematic tissue orientation at the dentin-ligament interface, resembling the native periodontium and thus resulting in enhanced alignment mimicking periodontal ligament regeneration. STATEMENT OF SIGNIFICANCE: Periodontitis is a prevalent inflammatory disease affecting a large portion of the adult population and leading to the destruction of the tooth-supporting structures (alveolar bone, periodontal ligament, and cementum). Current surgical treatments are unpredictable and generally result in repair rather than functional regeneration. A key feature of functional regeneration is the re-insertion of the oblique or perpendicularly orientated periodontal ligament fibre in both the alveolar bone and root surface. This study demonstrates that a highly porous scaffold featuring 100 µm width channels manufactured by the stacking of melt electrospun fibres, induced perpendicular alignment and attachment of the neo-ligament onto a dentine surface. The fibre guiding micro-architecture may pave the way for enhanced and more functional regeneration of the periodontium.

Biomaterials and biotechnology for periodontal tissue regeneration: Recent advances and perspectives

Periodontal tissues are organized in a complex three-dimensional (3D) architecture, including the alveolar bone, cementum, and a highly aligned periodontal ligament (PDL). Regeneration is difficult due to the complex structure of these tissues. Currently, materials are developing rapidly, among which synthetic polymers and hydrogels have extensive applications. Moreover, techniques have made a spurt of progress. By applying guided tissue regeneration (GTR) to hydrogels and cell sheets and using 3D printing, a scaffold with an elaborate biomimetic structure can be constructed to guide the orientation of fibers. The incorporation of cells and biotic factors improves regeneration. Nevertheless, the current studies lack long-term effect tracking, clinical research, and in-depth mechanistic research. In summary, periodontal tissue engineering still has considerable room for development. The development of materials and techniques and an in-depth study of the mechanism will provide an impetus for periodontal regeneration.

Biomaterials Used for Periodontal Disease Treatment: Focusing on Immunomodulatory Properties

The growing use of biomaterials with different therapeutic purposes increases the need for their physiological understanding as well as to seek its integration with the human body. Chronic inflammatory local pathologies, generally associated with infectious or autoimmunity processes, have been a current therapeutic target due to the difficulty in their treatment. The recent development of biomaterials with immunomodulatory capacity would then become one of the possible strategies for their management in local pathologies, by intervening in situ, without generating alterations in the systemic immune response. The treatment of periodontal disease as an inflammatory entity has involved the use of different approaches and biomaterials. There is no conclusive, high evidence about the use of these biomaterials in the regeneration of periodontitis sequelae, so the profession keeps looking for other different strategies. The use of biomaterials with immunomodulatory properties could be one, with a promising future. This review of the literature summarizes the scientific evidence about biomaterials used in the treatment of periodontal disease.

A Review of In Vivo and Clinical Studies Applying Scaffolds and Cell Sheet Technology for Periodontal Ligament Regeneration

Different approaches to develop engineered scaffolds for periodontal tissues regeneration have been proposed. In this review, innovations in stem cell technology and scaffolds engineering focused primarily on Periodontal Ligament (PDL) regeneration are discussed and analyzed based on results from pre-clinical in vivo studies and clinical trials. Most of those developments include the use of polymeric materials with different patterning and surface nanotopography and printing of complex and sophisticated multiphasic composite scaffolds with different compartments to accomodate for the different periodontal tissues' architecture. Despite the increased effort in producing these scaffolds and their undoubtable efficiency to guide and support tissue regeneration, appropriate source of cells is also needed to provide new tissue formation and various biological and mechanochemical cues from the Extraccellular Matrix (ECM) to provide biophysical stimuli for cell growth and differentiation. Cell sheet engineering is a novel promising technique that allows obtaining cells in a sheet format while preserving ECM components. The right combination of those factors has not been discovered yet and efforts are still needed to ameliorate regenerative outcomes towards the functional organisation of the developed tissues.

A hierarchical bilayer architecture for complex tissue regeneration

Engineering a complete, physiologically functional, periodontal complex structure remains a great clinical challenge due to the highly hierarchical architecture of the periodontium and coordinated regulation of multiple growth factors required to induce stem cell multilineage differentiation. Using biomimetic self-assembly and microstamping techniques, we construct a hierarchical bilayer architecture consisting of intrafibrillarly mineralized collagen resembling bone and cementum, and unmineralized parallel-aligned fibrils mimicking periodontal ligament. The prepared biphasic scaffold possesses unique micro/nano structure, differential mechanical properties, and growth factor-rich microenvironment between the two phases, realizing a perfect simulation of natural periodontal hard/soft tissue interface. The interconnected porous hard compartment with a Young's modulus of 1409.00 ± 160.83 MPa could induce cross-arrangement and osteogenic differentiation of stem cells in vitro, whereas the micropatterned soft compartment with a Young's modulus of 42.62 ± 4.58 MPa containing abundant endogenous growth factors, could guide parallel arrangement and fibrogenic differentiation of stem cells in vitro. After implantation in critical-sized complete periodontal tissue defect, the biomimetic bilayer architecture potently reconstructs native periodontium with the insertion of periodontal ligament fibers into newly formed cementum and alveolar bone by recruiting host mesenchymal stem cells and activating the transforming growth factor beta 1/Smad3 signaling pathway. Taken together, integration of self-assembly and microstamping strategies could successfully fabricate a hierarchical bilayer architecture, which exhibits great potential for recruiting and regulating host stem cells to promote synergistic regeneration of hard/soft tissues.

Scaffolds in Periodontal Regenerative Treatment

Successful periodontal regeneration requires the hierarchical reorganization of multiple tissues including periodontal ligament, cementum, alveolar bone, and gingiva. The limitation of conventional regenerative therapies has been attracting research interest in tissue engineering-based periodontal therapies where progenitor cells, scaffolds, and bioactive molecules are delivered. Scaffolds offer not only structural support but also provide geometrical clue to guide cell fate. Additionally, functionalization improves bioactive properties to the scaffold. Various scaffold designs have been proposed for periodontal regeneration. These include the fabrication of biomimetic periodontal extracellular matrix, multiphasic scaffolds with tissue-specific layers, and personalized 3D printed scaffolds. This review summarizes the basic concept as well as the recent advancement of scaffold designing and fabrication for periodontal regeneration and provides an insight of future clinical translation.

Regenerative Medicine Technologies to Treat Dental, Oral, and Craniofacial Defects

Additive manufacturing (AM) is the automated production of three-dimensional (3D) structures through successive layer-by-layer deposition of materials directed by computer-aided-design (CAD) software. While current clinical procedures that aim to reconstruct hard and soft tissue defects resulting from periodontal disease, congenital or acquired pathology, and maxillofacial trauma often utilize mass-produced biomaterials created for a variety of surgical indications, AM represents a paradigm shift in manufacturing at the individual patient level. Computer-aided systems employ algorithms to design customized, image-based scaffolds with high external shape complexity and spatial patterning of internal architecture guided by topology optimization. 3D bioprinting and surface modification techniques further enhance scaffold functionalization and osteogenic potential through the incorporation of viable cells, bioactive molecules, biomimetic materials and vectors for transgene expression within the layered architecture. These computational design features enable fabrication of tissue engineering constructs with highly tailored mechanical, structural, and biochemical properties for bone. This review examines key properties of scaffold design, bioresorbable bone scaffolds produced by AM processes, and clinical applications of these regenerative technologies. AM is transforming the field of personalized dental medicine and has great potential to improve regenerative outcomes in patient care.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Advanced technologies in periodontal tissue regeneration based on stem cells: Current status and future perspectives

Periodontitis is a progressive inflammation disease, the clinical management of which remains a challenge. The traditional management may control periodontal inflammation, but failed to regenerate functional periodontium. This review summarizes the most advancing regenerative techniques regarding stem cell culture and scaffold fabrication, such as cell sheeting, spheroid culture, electrospinning and 3D printing. The applications of different techniques manifest tremendous potential of regenerating the complete and functional periodontium. Albeit promising, new technologies have met with their own drawbacks such as insufficient vascularization and precision, which necessitate deeper modification. Thus, this review also points out the potential perspectives and methods aiming at their disadvantages, illuminating the directions of future researches to successful clinical scenarios.

Tissue Engineering and Three-Dimensional Printing in Periodontal Regeneration: A Literature Review

The three-dimensional printing of scaffolds is an interesting alternative to the traditional techniques of periodontal regeneration. This technique uses computer assisted design and manufacturing after CT scan. After 3D modelling, individualized scaffolds are printed by extrusion, selective laser sintering, stereolithography, or powder bed inkjet printing. These scaffolds can be made of one or several materials such as natural polymers, synthetic polymers, or bioceramics. They can be monophasic or multiphasic and tend to recreate the architectural structure of the periodontal tissue. In order to enhance the bioactivity and have a higher regeneration, the scaffolds can be embedded with stem cells and/or growth factors. This new technique could enhance a complete periodontal regeneration. This review summarizes the application of 3D printed scaffolds in periodontal regeneration. The process, the materials and designs, the key advantages and prospects of 3D bioprinting are highlighted, providing new ideas for tissue regeneration.

Multiscale porosity in mesoporous bioglass 3D-printed scaffolds for bone regeneration

In order to increase the bone forming ability of MBG-PCL composite scaffold, microporosity was created in the struts of 3D-printed MBG-PCL scaffolds for the manufacturing of a construct with a multiscale porosity consisting of meso- micro- and macropores. 3D-printing imparted macroporosity while the microporosity was created by porogen removal from the struts, and the MBG particles were responsible for the mesoporosity. The scaffolds were 3D-printed using a mixture of PCL, MBG and phosphate buffered saline (PBS) particles, subsequently leached out. Microporous-PCL (pPCL) as a negative control, microporous MBG-PCL (pMBG-PCL) and non-microporous-MBG-PCL (MBG-PCL) were investigated. Scanning electron microscopy, mercury intrusion porosimetry and micro-computed tomography demonstrated that the PBS removal resulted in the formation of micropores inside the struts with porosity of around 30% for both pPCL and pMBG-PCL, with both constructs displaying an overall porosity of 8090%. In contrast, the MBG-PCL group had a microporosity of 6% and an overall porosity of 70%. Early mineralisation was found in the pMBG-PCL post-leaching out and this resulted in the formation a more homogeneous calcium phosphate layer when using a biomimetic mineralisation assay. Mechanical properties ranged from 5 to 25 MPa for microporous and non-microporous specimens, hence microporosity was the determining factor affecting compressive properties. MC3T3-E1 metabolic activity was increased in the pMBG-PCL along with an increased production of RUNX2. Therefore, the microporosity within a 3D-printed bioceramic composite construct may result in additional physical and biological benefits.

Low-intensity pulsed ultrasound promotes the formation of periodontal ligament stem cell sheets and ectopic periodontal tissue regeneration

Human periodontal ligament stem cells (hPDLSCs) sheets play an important role in periodontal tissue engineering. Low-intensity pulsed ultrasound (LIPUS) has been reported as an effective stimulus to regulate cell biological behavior. The present study aims to explore the potential of LIPUS to promote the formation and function of hPDLSC sheets (hPDLSCSs). Hematoxylin-eosin (H&E) staining, western blot, real-time PCR, alkaline phosphatase (ALP), and alizarin red staining were used to evaluate the formation and osteogenic effect of LIPUS on hPDLSCSs in vitro. Hydroxyapatite with or without hPDLSCSs was transplanted in the subcutaneous pockets on the back of nude mice and histological analysis was performed. H&E staining showed increased synthesis of extracellular matrix (ECM) and real-time PCR detected a significant increase in ECM-related genes after LIPUS treatment. In addition, LIPUS could promote the expression of osteogenic differentiation-related genes and proteins. ALP and alizarin red staining also found LIPUS enhanced the osteogenesis of hPDLSCSs. After transplantation in vivo, more dense collagen fibers similar to periodontal ligament were regenerated. Collectively, these results indicate that LIPUS not only promotes the formation and osteogenic differentiation of hPDLSCSs but also is a potential treatment strategy for periodontal tissue engineering.

Dental stem cells: The role of biomaterials and scaffolds in developing novel therapeutic strategies

Dental stem cells (DSCs) are self-renewable cells that can be obtained easily from dental tissues, and are a desirable source of autologous stem cells. The use of DSCs for stem cell transplantation therapeutic approaches is attractive due to their simple isolation, high plasticity, immunomodulatory properties, and multipotential abilities. Using appropriate scaffolds loaded with favorable biomolecules, such as growth factors, and cytokines, can improve the proliferation, differentiation, migration, and functional capacity of DSCs and can optimize the cellular morphology to build tissue constructs for specific purposes. An enormous variety of scaffolds have been used for tissue engineering with DSCs. Of these, the scaffolds that particularly mimic tissue-specific micromilieu and loaded with biomolecules favorably regulate angiogenesis, cell-matrix interactions, degradation of extracellular matrix, organized matrix formation, and the mineralization abilities of DSCs in both in vitro and in vivo conditions. DSCs represent a promising cell source for tissue engineering, especially for tooth, bone, and neural tissue restoration. The purpose of the present review is to summarize the current developments in the major scaffolding approaches as crucial guidelines for tissue engineering using DSCs and compare their effects in tissue and organ regeneration.

Global gene expression profile of periodontal ligament cells submitted to mechanical loading: A systematic review

OBJECTIVE

To evaluate the evidence reporting gene expression array data of human in vitro cultured periodontal ligament cells (PDLCs) submitted to static mechanical loading compared to a control group.

DESIGN

Systematic searches were performed in MEDLINE/PubMed, Scopus, Web of Science, Virtual Health Library, The Cochrane Library and the System for Information on Grey Literature in Europe up to June 2019. A narrative synthesis was performed to summarize differentially expressed genes (DEGs). These were grouped according to the culture method (2D or 3D), force type (compression or tension) and observation time. Additionally, gene ontology (GO) analysis was performed using the Database for Annotation Visualization and Integrated Discovery. The risk of bias (RoB) and certainty of evidence (CoE) were assessed using a modified CONSORT checklist and the GRADE tool, respectively.

RESULTS

Of eight studies included (all rated as having moderate RoB), only two provided the complete list of DEGs and four studies performed GO, gene network or pathways analysis. "Cell proliferation", "cell-cell signaling", "response to hypoxia and to mechanical stimulus" were among the significantly enriched biological processes in 3D-cultured compressed PDLCs (moderate CoE); while "collagen catabolic process", "extracellular matrix organization" and "cell proliferation" were associated with DEGs of 3D-cultured PDLCs submitted to tension (very low CoE). Biological processes significantly enriched in 2D-cultured PDLCs under compression were "extracellular matrix organization", "canonical glycolysis" and "glycolytic process" (very low CoE).

CONCLUSION

Genes such as NR4A2, NR4A3, NAMPT, PGK1, and REDD1 are suggested as novel biomarkers for orthodontic tooth movement. Limited amount of evidence on the complete gene expression profile and the high heterogeneity in methodologies make it impossible to obtain definite conclusions. New studies following standardized and well-designed in vitro model and reporting complete gene expression datasets are needed.

3D Printing Approach in Dentistry: The Future for Personalized Oral Soft Tissue Regeneration

Three-dimensional (3D) printing technology allows the production of an individualized 3D object based on a material of choice, a specific computer-aided design and precise manufacturing. Developments in digital technology, smart biomaterials and advanced cell culturing, combined with 3D printing, provide promising grounds for patient-tailored treatments. In dentistry, the "digital workflow" comprising intraoral scanning for data acquisition, object design and 3D printing, is already in use for manufacturing of surgical guides, dental models and reconstructions. 3D printing, however, remains un-investigated for oral mucosa/gingiva. This scoping literature review provides an overview of the 3D printing technology and its applications in regenerative medicine to then describe 3D printing in dentistry for the production of surgical guides, educational models and the biological reconstructions of periodontal tissues from laboratory to a clinical case. The biomaterials suitable for oral soft tissues printing are outlined. The current treatments and their limitations for oral soft tissue regeneration are presented, including "off the shelf" products and the blood concentrate (PRF). Finally, tissue engineered gingival equivalents are described as the basis for future 3D-printed oral soft tissue constructs. The existing knowledge exploring different approaches could be applied to produce patient-tailored 3D-printed oral soft tissue graft with an appropriate inner architecture and outer shape, leading to a functional as well as aesthetically satisfying outcome.

Complex Geometry Cellulose Hydrogels Using a Direct Casting Method

To facilitate functional hydrogel part production using the indirect wax mould method, it is necessary to understand the relationships between materials, process and mould removal. This research investigated the thermophysical properties, wettability and surface roughness of wax template moulds in the production of cellulose hydrogel objects. Cellulose gel was thermally formed and shaped in three different wax moulds—high melting point paraffin, sacrificial investment casting wax and Solidscape^® wax—by physical cross-linking of polymer networks of cellulose solution in NaOH/urea aqueous solvent. All three wax moulds were capable of casting cellulose hydrogel objects. Cellulose gelling time was reduced by increasing the temperature. Thus, the mould melting temperature had a direct effect on the gelling time. It was found that mould removal time varied based on the contact angle (CA) of the cellulose solution and the mould, and based on the melting point of the mould. A higher CA of cellulose solution on the wax moulds resulted in faster mould removal. When melting the wax in 90 °C water, high melting point paraffin, sacrificial investment casting and Solidscape^® wax took about 3, 2 and 1.5 h, respectively, to remove the moulds from the cellulose gel.

Functionally graded biomimetic biomaterials in dentistry: an evidence-based update

Design and development of novel therapeutic strategies to regenerate lost tissue structure and function is a serious clinical hurdle for researchers. Traditionally, much of the research is dedicated in optimising properties of scaffolds. Current synthetic biomaterials remain rudimentary in comparison to their natural counterparts. The ability to incorporate biologically inspired elements into the design of synthetic materials has advanced with time. Recent reports suggest that functionally graded material mimicking the natural tissue morphology can have a more exaggerated response on the targeted tissue. The aim of this review is to deliver an overview of the functionally graded concept with respect to applications in clinical dentistry. A comprehensive understanding of spatiotemporal arrangement in fields of restorative, prosthodontics, periodontics, orthodontics and oral surgery is presented. Different processing techniques have been adapted to achieve such gradients ranging from additive manufacturing (three dimensional printing/rapid prototyping) to conventional techniques of freeze gelation, freeze drying, electrospinning and particulate leaching. The scope of employing additive manufacturing technique as a reliable and predictable tool for the design and accurate reproduction of biomimetic templates is vast by any measure. Further research in the materials used and refinement of the synthesis techniques will continue to expand the frontiers of functionally graded membrane based biomaterials application in the clinical domain.

Fibre guiding scaffolds for periodontal tissue engineering

The periodontium is a highly hierarchically organized organ composed of gingiva, alveolar bone, periodontal ligament and cementum. Periodontitis leads to the destruction of hard and soft tissues ultimately leading to a loss of the teeth supporting apparatus. Current treatments are capable of limiting the disease progression; however, true regeneration, characterized by perpendicularly oriented periodontal ligament fibre attachment to cementum on the root surface remains challenging. Tissue engineering approaches have been developed to enhance regeneration via micro-engineered topographical features, purposely designed to guide the insertion of the regenerated ligament to the root surface. This review reports on the recent advancements in scaffold manufacturing methodologies for generating fibre guiding properties and provides a critical insight in the current limitations of these techniques for the formation of functional periodontal attachment.

Recent advances in periodontal regeneration: A biomaterial perspective

Periodontal disease (PD) is one of the most common inflammatory oral diseases, affecting approximately 47% of adults aged 30 years or older in the United States. If not treated properly, PD leads to degradation of periodontal tissues, causing tooth movement, and eventually tooth loss. Conventional clinical therapy for PD aims at eliminating infectious sources, and reducing inflammation to arrest disease progression, which cannot achieve the regeneration of lost periodontal tissues. Over the past two decades, various regenerative periodontal therapies, such as guided tissue regeneration (GTR), enamel matrix derivative, bone grafts, growth factor delivery, and the combination of cells and growth factors with matrix-based scaffolds have been developed to target the restoration of lost tooth-supporting tissues, including periodontal ligament, alveolar bone, and cementum. This review discusses recent progresses of periodontal regeneration using tissue-engineering and regenerative medicine approaches. Specifically, we focus on the advances of biomaterials and controlled drug delivery for periodontal regeneration in recent years. Special attention is given to the development of advanced bio-inspired scaffolding biomaterials and temporospatial control of multi-drug delivery for the regeneration of cementum-periodontal ligament-alveolar bone complex. Challenges and future perspectives are presented to provide inspiration for the design and development of innovative biomaterials and delivery system for new regenerative periodontal therapy.

Combination of a biomolecule-aided biphasic cryogel scaffold with a barrier membrane adhering PDGF-encapsulated nanofibers to promote periodontal regeneration

OBJECTIVE AND BACKGROUND

To achieve periodontal regeneration, numerous investigations have concentrated on biomolecule supplement and optimization of bone substitute or barrier membrane. This study evaluated the benefit of combining these strategies for periodontal regeneration.

METHODS

Biphasic cryogel scaffold (BCS) composed of gelatin (ligament phase) and gelatin with beta-tricalcium phosphate/hydroxyapatite (BH) (bone phase) was designed as tested bone substitute, and both enamel matrix derivatives (EMD) and bone morphogenetic protein-2 (BMP-2) were applied to formulate a biomolecule-aided BCS (BBS). Functionally graded membrane (FGM) was designed as tested barrier membrane by adhering PDGF-encapsulated poly(L-lactide-co-D/L-lactide) nanofibers on the conventional membrane (CM). BBS and FGM were characterized and tested for biocompatibility in vitro. Thirty 4 × 4 × 5 mm³ periodontal intrabony defects were created on 6 Beagle dogs. Each defect was evenly assigned to one of the following treatments including BH-CM, BCS-CM, BBS-CM, BH-FGM, BCS-FGM, and BBS-FGM, for 12 weeks. The therapeutic efficiency was assessed by micro-CT and histology.

RESULTS

BCS and FGM sustained the release of biomolecules. The viability of MSCs was maintained in both phases of BCS and was promoted while seeding on the PDGF-encapsulated nanofibers. In CM-covered sites, BBS showed significantly greater osteogenesis (P < .01) and early defect fill (P < .05) relative to BH. FGM significantly promoted osteogenesis (P < .05) in BH-treated sites but showed limited benefit in BBS-treated sites. On denuded roots, cementum deposition was evident in BBS-treated sites.

CONCLUSIONS

PDGF-loaded FGM promoted periodontal osteogenesis, and BBS with EMD-BMP-2 had potential for reconstructing alveolar ridge, periodontal ligament, and cementum. FGM and BBS combination provided limited additional benefit.