pH-controlled recovery of placenta-derived mesenchymal stem cell sheets

Recent Advances in Cell Sheet-Based Tissue Engineering for Bone Regeneration

In conventional bone tissue engineering, cells are seeded onto scaffolds to create three-dimensional (3D) tissues, but the cells on the scaffolds are unable to effectively perform their physiological functions due to their low density and viability. Cell sheet (CS) engineering is expected to be free from this limitation. CS engineering uses the principles of self-assembly and self-organization of endothelial and mesenchymal stem cells to prepare CSs as building blocks for engineering bone grafts. This process recapitulates the native tissue development, thus attracting significant attention in the field of bone regeneration. However, the method is still in the prebasic experimental stage in bone defect repair. To make the method clinically applicable and valuable in personalized and precision medicine, current research is focused on the preparation of multifunctionalized building blocks using CS technologies, such as 3D layered CSs containing microvascular structures. Considering the great potential of CS engineering in repairing bone defects, in this review, the types of cell technologies are first outlined. We then summarize the various types of CSs as building blocks for engineering bone grafts. Furthermore, the specific applications of CSs in bone repair are discussed. Finally, we present specific suggestions for accelerating the application of CS engineering in the clinical treatment of bone defects.

Strategy for Nonenzymatic Harvesting of Cells via Decoupling of Adhesive and Disjoining Domains of Nanostructured Stimulus-Responsive Polymer Films

The nanostructured polymer film introduces a novel mechanism of nonenzymatic cell harvesting by decoupling solid cell-adhesive and soft stimulus-responsive cell-disjoining areas on the surface. The key characteristics of this architecture are the decoupling of adhesion from detachment and the impermeability to the integrin protein complex of the adhesive domains. This surface design eliminates inherent limitations of thermoresponsive coatings, namely, the necessity for the precise thickness of the coating, grafting or cross-linking density, and material of the basal substrate. The concept is demonstrated with nanostructured thermoresponsive films made of cell-adhesive epoxy photoresist domains and cell-disjoining poly(N-isopropylacrylamide) brush domains.

Magnetic-Based Strategies for Regenerative Medicine and Tissue Engineering

The fabrication of biological substitutes to repair, replace, or enhance tissue- and organ-level functions is a long-sought goal of tissue engineering (TE). However, the clinical translation of TE is hindered by several challenges, including the lack of suitable mechanical, chemical, and biological properties in one biomaterial, and the inability to generate large, vascularized tissues with a complex structure of native tissues. Over the past decade, a new generation of "smart" materials has revolutionized the conventional medical field, transforming TE into a more accurate and sophisticated concept. At the vanguard of scientific development, magnetic nanoparticles (MNPs) have garnered extensive attention owing to their significant potential in various biomedical applications owing to their inherent properties such as biocompatibility and rapid remote response to magnetic fields. Therefore, to develop functional tissue replacements, magnetic force-based TE (Mag-TE) has emerged as an alternative to conventional TE strategies, allowing for the fabrication and real-time monitoring of tissues engineered in vitro. This review addresses the recent studies on the use of MNPs for TE, emphasizing the in vitro, in vivo, and clinical applications. Future perspectives of Mag-TE in the fields of TE and regenerative medicine are also discussed.

Current status and future prospects of stomatology research

Research in stomatology (dental medicine) continues to expand globally and is oriented towards solving clinical issues, focusing on clarifying the clinical relevance and potential mechanisms of oral‍-‍systemic connections via clinical epidemiology, oral microecological characterization, and the establishment of animal models. Interdisciplinary integration of materials science and tissue engineering with stomatology is expected to lead to the creation of innovative materials and technologies to better resolve the most prevalent and challenging clinical issues such as peri-implantitis, soft and hard tissue defects, and dentin hypersensitivity. With the rapid development of artificial intelligence (AI), 5th generation mobile communication technology (5G), and big data applications, "intelligent stomatology" is emerging to build models for better clinical diagnosis and management, accelerate the reform of education, and support the growth and advancement of scientific research. Here, we summarized the current research status, and listed the future prospects and limitations of these three aspects, aiming to provide a basis for more accurate etiological exploration, novel treatment methods, and abundant big data analysis in stomatology to promote the translation of research achievements into practical applications for both clinicians and the public.

Recent Advances in Cell Sheet Engineering: From Fabrication to Clinical Translation

Cell sheet engineering, a scaffold-free tissue fabrication technique, has proven to be an important breakthrough technology in regenerative medicine. Over the past two decades, the field has developed rapidly in terms of investigating fabrication techniques and multipurpose applications in regenerative medicine and biological research. This review highlights the most important achievements in cell sheet engineering to date. We first discuss cell sheet harvesting systems, which have been introduced in temperature-responsive surfaces and other systems to overcome the limitations of conventional cell harvesting methods. In addition, we describe several techniques of cell sheet transfer for preclinical (in vitro and in vivo) and clinical trials. This review also covers cell sheet cryopreservation, which allows short- and long-term storage of cells. Subsequently, we discuss the cell sheet properties of angiogenic cytokines and vasculogenesis. Finally, we discuss updates to various applications, from biological research to clinical translation. We believe that the present review, which shows and compares fundamental technologies and recent advances in cell engineering, can potentially be helpful for new and experienced researchers to promote the further development of tissue engineering in different applications.

Cell Sheet Technology as an Engineering-Based Approach to Bone Regeneration

Bone defects that are congenital or the result of infection, malignancy, or trauma represent a challenge to the global healthcare system. To address this issue, multiple research groups have been developing novel cell sheet technology (CST)-based approaches to promote bone regeneration. These methods hold promise for use in regenerative medicine because they preserve cell-cell contacts, cell-extracellular matrix interactions, and the protein makeup of cell membranes. This review introduces the concept and preparation system of the cell sheet (CS), explores the application of CST in bone regeneration, highlights the current states of the bone regeneration via CST, and offers perspectives on the challenges and future research direction of translating current knowledge from the lab to the clinic.

Construction of biomimetic cell-sheet-engineered periosteum with a double cell sheet to repair calvarial defects of rats

Background

The periosteum plays a crucial role in the development and injury healing process of bone. The purpose of this study was to construct a biomimetic periosteum with a double cell sheet for bone tissue regeneration.

Methods

In vitro, the human amniotic mesenchymal stem cells (hAMSCs) sheet was first fabricated by adding 50 ​μg/ml ascorbic acid to the cell sheet induction medium. Characterization of the hAMSCs sheet was tested by general observation, microscopic observation, live/dead staining, scanning electron microscopy (SEM) and hematoxylin and eosin (HE) staining. Afterwards, the osteogenic cell sheet and vascular cell sheet were constructed and evaluated by general observation, alkaline phosphatase (ALP) staining, Alizarin Red S staining, SEM, live/dead staining and CD31 immunofluorescent staining for characterization. Then, we prepared the double cell sheet. In vivo, rat calvarial defect model was introduced to verify the regeneration of bone defects treated by different methods. Calvarial defects (diameter: 4 ​mm) were created of Sprague–Dawley rats. The rats were randomly divided into 4 groups: the control group, the osteogenic cell sheet group, the vascular cell sheet group and the double cell sheet group. Macroscopic, micro-CT and histological evaluations of the regenerated bone were performed to assess the treatment results at 8 weeks and 12 weeks after surgery.

Results

In vitro, hAMSCs sheet was successfully prepared. The hAMSCs sheet consisted of a large number of live hAMSCs and abundant extracellular matrix (ECM) that secreted by hAMSCs, as evidenced by macroscopic/microscopic observation, live/dead staining, SEM and HE staining. Besides, the osteogenic cell sheet and the vascular cell sheet were successfully prepared, which were verified by general observation, ALP staining, Alizarin Red S staining, SEM and CD31 immunofluorescent staining. In vivo, the macroscopic observation and micro-CT results both demonstrated that the double cell sheet group had better effect on bone regeneration than other groups. In addition, histological assessments indicated that large amounts of new bone had formed in the calvarial defects and more mature collagen in the double cell sheet group.

Conclusion

The double cell sheet could promote to repair calvarial defects of rats and accelerate bone regeneration.

The translational potential of this article

We successfully constructed a biomimetic cell-sheet-engineered periosteum with a double cell sheet by a simple, low-cost and effective method. This biomimetic periosteum may be a promising therapeutic strategy for the treatment of bone defects, which may be used in clinic in the future.

The Progress of Stem Cell Therapy in Myocardial-Infarcted Heart Regeneration: Cell Sheet Technology

Various tissues, including the heart, cornea, bone, esophagus, bladder and liver, have been vascularized using the cell sheet technique. It overcomes the limitations of existing techniques by allowing small layers of the cell sheet to generate capillaries on their own, and it can also be used to vascularize tissue-engineered transplants. Cell sheets eliminate the need for traditional tissue engineering procedures such as isolated cell injections and scaffold-based technologies, which have limited applicability. While cell sheet engineering can eliminate many of the drawbacks, there are still a few challenges that need to be addressed. The number of cell sheets that can be layered without triggering core ischemia or hypoxia is limited. Even when scaffold-based technologies are disregarded, strategies to tackle this problem remain a substantial impediment to the efficient regeneration of thick, living three-dimensional cell sheets. In this review, we summarize the cell sheet technology in myocardial infarcted tissue regeneration.

Scaffold-Free Strategy Using a PEG-Dextran Aqueous Two-Phase-System for Corneal Tissue Repair

Forming thin tissue constructs with minimal extracellular matrix surrounding them is important for tissue engineering applications. Here, we explore and optimize a strategy that enables rapid fabrication of scaffold-free corneal tissue constructs using the liquid-liquid interface of an aqueous two-phase system (ATPS) that is based on biocompatible polymers, dextran and polyethylene glycol. Intact tissue-like constructs, made of corneal epithelial or endothelial cells, can be formed on the interface between the two liquid phases of ATPS within hours and subsequently collected simply by removing the liquid phases. The formed corneal cell constructs express essential physiological markers and have preserved viability and proliferative ability in vitro. The corneal epithelial cell constructs are also able to re-epithelialize the corneal epithelial wound in vitro. The results suggest the promise of our reported strategy in corneal repair.

hAMSC Sheet Promotes Repair of Rabbit Osteochondral Defects

Osteochondral lesion is clinically common disease, which has been recognized as one of the contributing factors of significant morbidity. Although current treatments have achieved good outcomes, some undesirable complications and failures are not uncommon. Cell sheet technology (CST), an innovative technology to harvest seed cells and preserve abundant ECM, has been widely used in various tissue regeneration. For osteochondral lesion, many studies focus on using CST to repair osteochondral lesion and have achieved good outcomes. In the previous study, we have demonstrated that hAMSC sheet had a positive effect on osteochondral lesion. Therefore, this study is aimed at comparing the effect of noninduced hAMSC sheet with chondrogenically induced hAMSC sheet on osteochondral lesion and cartilage regeneration.

A Topologically Engineered Gold Island for Programmed In Vivo Stem Cell Manipulation

E ven a well-designed system can only control stem cell adhesion, release, and differentiation, while other cell manipulations such as in situ labeling and retention in target tissues, are difficult to achieve in the same system. Herein, native ligand cluster-mimicking islands, composed of topologically engineered ligand, anchoring point AuNP, nuclease mimetics Ce IV complexes and magnetic core Fe 3 O 4 , are designed to facilitate comprehensive cell manipulations in a programmable manner. Three islands with different amounts of AuNPs are constructed, which means tunable interligand spacing within a cluster. These nanostructures are chemically coupled to a substrate using DNA tethers. Under tissue-penetrative magnetic field, this integrated system promotes stem cell adhesion, proliferation, mechanosensing, differentiation, detachment, in situ effective magnetic labeling and retention both in vitro and in vivo , offering fascinating opportunities for biomimetic matrix in regenerative medicine.

Novel therapies using cell sheets engineered from allogeneic mesenchymal stem/stromal cells

Mesenchymal stem/stromal cells (MSCs) have long been recognized to help regenerate tissues, by exploiting their intrinsic potentials for differentiation and secretion of therapeutic paracrine factors together with feasibility for cell banking. These unique MSC properties are attractive to provide effective new cell-based therapies for unmet medical needs. Currently, the infusion of suspended MSCs is accepted as a promising therapy to treat systemic inflammatory diseases. However, low cell engraftment/retention in target organs and off-target entrapment using conventional cell infusion must be improved to provide reliable localized disease treatments. Cell sheet technology offers an alternative: three-dimensional (3D) tissue-like structures can be harvested from culture using mild temperature reduction, and transplanted directly onto target tissue sites without suturing, yielding stable cell engraftment and prolonged cell retention in situ without off-target losses. Engineered MSC sheets directly address two major cell therapy strategies based on their therapeutic benefits: (1) tissue replacements based on mult-ilineage differentiation capacities, focusing on cartilage regeneration in this review, and (2) enhancement of tissue recovery via paracrine signaling, employing their various secreted cytokines to promote neovascularization. MSCs also have production benefits as a promising allogeneic cell source by exploiting their reliable proliferative capacity to facilitate expansion and sustainable cell banking for off-the-shelf therapies. This article reviews the advantages of both MSCs as allogeneic cell sources in contrast with autologous cell sources, and allogeneic MSC sheets engineered on thermo-responsive cell dishes as determined in basic studies and clinical achievements, indicating promise to provide robust new cell therapies to future patients.

One-step harvest and delivery of micropatterned cell sheets mimicking the multi-cellular microenvironment of vascularized tissue

Techniques for harvest and delivery of cell sheets have been improving for decades. However, cell sheets with complicated patterns closely related to natural tissue architecture were hardly achieved. Here, we developed an efficient method to culture and harvest cell sheets with complex shape (noted as microtissues) using temperature-responsive hydrogel consisting of expandable polyethylene oxide polymer at low temperature. Firstly, a temperature-responsive hydrogel surface with honeycomb patterns (50 and 100 µm in width) were developed through microcontact printing of polydopamine (PD). The human dermal fibroblasts (HDFBs) and human umbilical vein endothelial cells (HUVECs) spontaneously formed honeycomb-shaped microtissues on the patterned hydrogel surface. The microtissues on the hydrogel were able to be harvested and directly delivered to the desired target through thermal expansion of the hydrogel at 4 °C with an efficiency close to 80% within 10 min which is faster than conventional method based on poly(N-isopropylacrylamide). The microtissues maintained their original honeycomb network and intact structures. Honeycomb-patterned cell sheets also were fabricated through serial seeding of various cell lines, including HDFBs, HUVECs, and human adipose-derived stem cells, in which cells were attached along the honeycomb pattern. The underlying honeycomb patterns in the cell sheets were successfully maintained for 3 days, even after delivery. In addition, patterned cell sheets were successfully delivered in vivo while maintaining an intact structure for 7 days. Together, our findings demonstrate that micropatterned temperature-responsive hydrogel is an efficient method of one-step culturing and delivery of complex microtissues and should prove useful in various tissue engineering applications. STATEMENT OF SIGNIFICANCE: Scaffold-free cell delivery techniques, including cell sheet engineering, have been developed for decades. However, there is limited research regarding culture and delivery of microtissues with complex architecture mimicking natural tissue. Herein, we developed a micro-patterned hydrogel platform for the culture and delivery of honeycomb-shaped microtissues. Honeycomb patterns were chemically engineered on the temperature-responsive hydrogel through microcontact printing of polydopamine to selectively allow for human dermal fibroblast or human umbilical vein endothelial cell adhesion. They spontaneously formed honeycomb-shaped microtissues within 24 hr upon cell seeding and directly delivered to various target area including in vivo via thermal expansion of the hydrogel at 4 °C, suggesting that the micro-patterned hydrogel can be an efficient tool for culture and delivery of complex microtissue.

A Near-Infrared-Triggered Dynamic Wrinkling Biointerface for Noninvasive Harvesting of Practical Cell Sheets

Cell sheet engineering represents a new era of precise and efficient regenerative medicine, but its efficacy is limited by the elaborative preparation and the weak mechanics. Herein, a near-infrared (NIR)-triggered dynamic wrinkling biointerface was designed for rapid acquisition of practical cell sheets. The biocompatible NIR can initiate the photothermal-mechanical linkage cascade to efficiently dissolve the collagen supporting layer and release the high-quality cell sheets. The interfacial shear force generates with the dynamic wrinkling, playing an active role in accelerating the cell sheet release. High-quality and self-supporting cell sheets can be harvested within a few minutes, demonstrating a new paradigm of photothermal-mechanical manipulation. The transplantable cell sheets with outstanding physiological and mechanical performances were proven to promote wound healing in skin regeneration. This method may open a completely new front in thermal and mechanical responsive cascade to harvest cell sheets, facilitating their wide applications in regenerative medicine.

Chips for Biomaterials and Biomaterials for Chips: Recent Advances at the Interface between Microfabrication and Biomaterials Research

In recent years, the use of microfabrication techniques has allowed biomaterials studies which were originally carried out at larger length scales to be miniaturized as so-called "on-chip" experiments. These miniaturized experiments have a range of advantages which have led to an increase in their popularity. A range of biomaterial shapes and compositions are synthesized or manufactured on chip. Moreover, chips are developed to investigate specific aspects of interactions between biomaterials and biological systems. Finally, biomaterials are used in microfabricated devices to replicate the physiological microenvironment in studies using so-called "organ-on-chip," "tissue-on-chip" or "disease-on-chip" models, which can reduce the use of animal models with their inherent high cost and ethical issues, and due to the possible use of human cells can increase the translation of research from lab to clinic. This review gives an overview of recent developments at the interface between microfabrication and biomaterials science, and indicates potential future directions that the field may take. In particular, a trend toward increased scale and automation is apparent, allowing both industrial production of micron-scale biomaterials and high-throughput screening of the interaction of diverse materials libraries with cells and bioengineered tissues and organs.

Cell-Based Therapy Manufacturing in Stirred Suspension Bioreactor: Thoughts for cGMP Compliance

Cell-based therapy (CBT) is attracting much attention to treat incurable diseases. In recent years, several clinical trials have been conducted using human pluripotent stem cells (hPSCs), and other potential therapeutic cells. Various private- and government-funded organizations are investing in finding permanent cures for diseases that are difficult or expensive to treat over a lifespan, such as age-related macular degeneration, Parkinson’s disease, or diabetes, etc. Clinical-grade cell manufacturing requiring current good manufacturing practices (cGMP) has therefore become an important issue to make safe and effective CBT products. Current cell production practices are adopted from conventional antibody or protein production in the pharmaceutical industry, wherein cells are used as a vector to produce the desired products. With CBT, however, the “cells are the final products” and sensitive to physico- chemical parameters and storage conditions anywhere between isolation and patient administration. In addition, the manufacturing of cellular products involves multi-stage processing, including cell isolation, genetic modification, PSC derivation, expansion, differentiation, purification, characterization, cryopreservation, etc. Posing a high risk of product contamination, these can be time- and cost- prohibitive due to maintenance of cGMP. The growing demand of CBT needs integrated manufacturing systems that can provide a more simple and cost-effective platform. Here, we discuss the current methods and limitations of CBT, based upon experience with biologics production. We review current cell manufacturing integration, automation and provide an overview of some important considerations and best cGMP practices. Finally, we propose how multi-stage cell processing can be integrated into a single bioreactor, in order to develop streamlined cGMP-compliant cell processing systems.

Corneal endothelium tissue engineering: An evolution of signaling molecules, cells, and scaffolds toward 3D bioprinting and cell sheets

Cornea is an avascular and transparent tissue that focuses light on retina. Cornea is supported by the corneal-endothelial layer through regulation of hydration homeostasis. Restoring vision in patients afflicted with corneal endothelium dysfunction-mediated blindness most often requires corneal transplantation (CT), which faces considerable constrictions due to donor limitations. An emerging alternative to CT is corneal endothelium tissue engineering (CETE), which involves utilizing scaffold-based methods and scaffold-free strategies. The innovative scaffold-free method is cell sheet engineering, which typically generates cell layers surrounded by an intact extracellular matrix, exhibiting tunable release from the stimuli-responsive surface. In some studies, scaffold-based or scaffold-free technologies have been reported to achieve promising outcomes. However, yet some issues exist in translating CETE from bench to clinical practice. In this review, we compare different corneal endothelium regeneration methods and elaborate on the application of multiple cell types (stem cells, corneal endothelial cells, and endothelial precursors), signaling molecules (growth factors, cytokines, chemical compounds, and small RNAs), and natural and synthetic scaffolds for CETE. Furthermore, we discuss the importance of three-dimensional bioprinting strategies and simulation of Descemet's membrane by biomimetic topography. Finally, we dissected the recent advances, applications, and prospects of cell sheet engineering for CETE.

π-SACS: pH Induced Self-Assembled Cell Sheets Without the Need for Modified Surfaces

The ability to form tissue-like constructs that have high cell density with proper cell-cell and cell-ECM interactions is critical for many applications including tissue models for drug discovery and tissue regeneration. Newly emerging bioprinting methods sometimes lack the high cellular density needed to provide biophysical cues to orchestrate cellular behavior to recreate tissue architecture and function. Alternate methods using self-assembly can be used to create tissue-like constructs with high cellular density and well-defined microstructure in the form of spheroids, organoids, or cell sheets. Cell sheets have a particularly interesting architecture in the context of tissue regeneration and repair as they can be applied as patches to integrate with surrounding tissues. Until now, the preparation of these sheets has involved culturing on specialized substrates that can be triggered by temperature or phase change (hydrophobic to hydrophilic) to release cells growing on them and form sheets. Here a new technique is proposed that allows delamination of cells and secreted ECM and rapid self-assembly into a cell sheet using a simple pH trigger and without the need to use responsive surfaces or applying external stimuli such as electrical and magnetic fields, only with routine tissue culture plates. This technique can be used with cells that are capable of syncytialization and fusion such as skeletal muscle cells and placenta cells. Using C2C12 myoblast cells we show that the pH trigger induces a rapid delamination of the cells as a continuous layer that self-assembles into a thick dense sheet. The delamination process has little effect on cell viability and maturation and preserves the ECM components that allow sheets to adhere to each other within a short incubation time enabling formation of thicker constructs when multiple sheets are stacked (double- and quadruple-layer constructs are formed here). These thick grafts can be used for regeneration purposes or as in vitro models.

Human Amniotic Mesenchymal Stem Cell Sheets Encapsulating Cartilage Particles Facilitate Repair of Rabbit Osteochondral Defects

BACKGROUND

Human amniotic mesenchymal stem cells (hAMSCs) are being widely applied in various fields. Therefore, hAMSCs represent a promising candidate to facilitate cartilage regeneration. Nonetheless, no studies have investigated the application of hAMSC sheets to repair cartilage defects in vivo.

PURPOSE

To evaluate hAMSC sheets encapsulating cartilage particles to promote repair of rabbit osteochondral defects.

STUDY DESIGN

Controlled laboratory study.

METHODS

hAMSC sheets were constructed with passage 3 hAMSCs. The phenotypic and structural characteristics of hAMSC sheets were evaluated by flow cytometry and scanning electron microscopy, respectively. The potential for chondrogenic differentiation of hAMSC sheets was assessed by cartilage-specific marker staining, immunohistochemistry, and mRNA and protein expression (SOX9, COLII, and ACAN). Osteochondral defects (diameter, 3.5 mm; depth, 3 mm) were created in the left patellar grooves of 20 New Zealand White rabbits (female or male). The defects were treated with hAMSC sheet/cartilage particles (n = 5), cartilage particles (n = 5), hAMSC sheets (n = 5), or fibrin glue (n = 5). Macroscopic and histological evaluations of the regenerated tissue were conducted after 3 months. The survival time and differentiation of transplanted hAMSCs in the defect area were evaluated by immunofluorescence.

RESULTS

hAMSC sheets had a multilayered structure, with cells stacked layer by layer. Importantly, hAMSC sheets highly expressed phenotypic markers of mesenchymal stem cells. Cartilage-specific marker staining and immunohistochemistry were positive, and mRNA and protein expression was higher in the chondrogenically induced hAMSC sheet group than in the hAMSC sheet group (P < .05). hAMSC sheet/cartilage particles formed a large amount of hyaline-like cartilage in the defect area. In addition, macroscopic and histological scores were significantly higher than those in the other groups. Integration with surrounding normal cartilage and subchondral bone regeneration in the hAMSC sheet/cartilage particles group were better when compared with the other groups. A large number of human nuclear-specific antigen-positive cells were observed in the defect area of hAMSC sheet/cartilage particles and hAMSC sheet groups. Moreover, some positive cells expressed SOX9.

CONCLUSION

hAMSC sheets encapsulating cartilage particles facilitate osteochondral defect repair.

CLINICAL RELEVANCE

Delivery of cells in the form of a cell sheet in conjunction with cartilage particles provides a novel approach for cell-based cartilage regeneration.

Recent Advances in ROS-Responsive Cell Sheet Techniques for Tissue Engineering

Cell sheet engineering has evolved rapidly in recent years as a new approach for cell-based therapy. Cell sheet harvest technology is important for producing viable, transplantable cell sheets and applying them to tissue engineering. To date, most cell sheet studies use thermo-responsive systems to detach cell sheets. However, other approaches have been reported. This review provides the progress in cell sheet detachment techniques, particularly reactive oxygen species (ROS)-responsive strategies. Therefore, we present a comprehensive introduction to ROS, their application in regenerative medicine, and considerations on how to use ROS in cell detachment. The review also discusses current limitations and challenges for clarifying the mechanism of the ROS-responsive cell sheet detachment.

Recent advances in cell sheet technology for bone and cartilage regeneration: from preparation to application

Bone defects caused by trauma, tumour resection, infection and congenital deformities, together with articular cartilage defects and cartilage-subchondral bone complex defects caused by trauma and degenerative diseases, remain great challenges for clinicians. Novel strategies utilising cell sheet technology to enhance bone and cartilage regeneration are being developed. The cell sheet technology has shown great clinical potential in regenerative medicine due to its effective preservation of cell-cell connections and extracellular matrix and its scaffold-free nature. This review will first introduce several widely used cell sheet preparation systems, including traditional approaches and recent improvements, as well as their advantages and shortcomings. Recent advances in utilising cell sheet technology to regenerate bone or cartilage defects and bone-cartilage complex defects will be reviewed. The key challenges and future research directions for the application of cell sheet technology in bone and cartilage regeneration will also be discussed.

Magnetic Nanoparticle-Embedded Hydrogel Sheet with a Groove Pattern for Wound Healing Application

Endothelial progenitor cells (EPCs) can induce a pro-angiogenic response during tissue repair. Recently, EPC transplantations have been widely investigated in wound healing applications. To maximize the healing efficacy by EPCs, a unique scaffold design that allows cell retention and function would be desirable for in situ delivery. Herein, we fabricated an alginate/poly-l-ornithine/gelatin (alginate-PLO-gelatin) hydrogel sheet with a groove pattern for use as a cell delivery platform. In addition, we demonstrate the topographical modification of the hydrogel sheet surface with a groove pattern to modulate cell proliferation, alignment, and elongation. We report that the patterned substrate prompted morphological changes of endothelial cells, increased cell-cell interaction, and resulted in the active secretion of growth factors such as PDGF-BB. Additionally, we incorporated magnetic nanoparticles (MNPs) into the patterned hydrogel sheet for the magnetic field-induced transfer of cell-seeded hydrogel sheets. As a result, enhanced wound healing was observed via efficient transplantation of the EPCs with an MNP-embedded patterned hydrogel sheet (MPS). Finally, enhanced vascularization and dermal wound repair were observed with EPC seeded MPS.

Mesenchymal stem cell sheets: a new cell-based strategy for bone repair and regeneration

Mesenchymal stem cells (MSCs), a class of adult stem cells, are considered a promising source for bone regeneration. Although combining MSCs with biomaterial scaffolds offers an interesting clinical strategy for bone tissue engineering, the presence of the scaffolds could induce an undesirable effect on cell-cell interactions. Moreover, before the application of scaffold materials in bone tissue reconstruction, cells must be manipulated with proteolytic enzymes, such as trypsin or dispase that degrade extracellular matrix (ECM) molecules and cell surface proteins, which can result in the cell damage and loss of cellular activity. Therefore, the development of alternative strategies for bone regeneration is required to solve these problems. Recently, a novel tissue engineering technology named 'cell sheet' has been efficaciously utilized in the regeneration of bone, corneal, cardiac, tracheal and periodontal ligament-like tissues. The cell sheet is a layer of cells, which contains intact ECM and cell surface proteins such as growth factor receptors, ion channels and cell-to-cell junction proteins. MSC sheets can be easily fabricated by layering the recovered cell sheets without any scaffolds or complicated manipulation. This review summarizes the current state of the literature regarding the use of MSCs to produce cell sheets and assesses their applicability in bone tissue regeneration and repair.

Harvesting prevascularized smooth muscle cell sheets from common polystyrene culture dishes

Cell sheet engineering has recently emerged as a promising strategy for scaffold-free tissue engineering. However, the primary method of harvesting cell sheets using temperature-responsive dishes has potential limitations. Here we report a novel cell sheet technology based on a coculture system in which SMCs are cocultured with EPCs on common polystyrene dishes. We found that an intact and highly viable cell sheet could be harvested using mechanical methods when SMCs and EPCs were cocultured on common polystyrene dishes at a ratio of 6:1 for 5 to 6 days; the method is simple, cost-effective and highly repeatable. Moreover, the cocultured cell sheet contained capillary-like networks and could secrete a variety of angiogenic factors. Finally, in vivo studies proved that the cocultured cell sheets were more favorable for the fabrication of vascularized smooth muscle tissues compared to single SMC sheets. This study provides a promising avenue for smooth muscle tissue engineering.

Biomanufacturing of Therapeutic Cells: State of the Art, Current Challenges, and Future Perspectives

Stem cells and other functionally defined therapeutic cells (e.g., T cells) are promising to bring hope of a permanent cure for diseases and disorders that currently cannot be cured by conventional drugs or biological molecules. This paradigm shift in modern medicine of using cells as novel therapeutics can be realized only if suitable manufacturing technologies for large-scale, cost-effective, reproducible production of high-quality cells can be developed. Here we review the state of the art in therapeutic cell manufacturing, including cell purification and isolation, activation and differentiation, genetic modification, expansion, packaging, and preservation. We identify current challenges and discuss opportunities to overcome them such that cell therapies become highly effective, safe, and predictively reproducible while at the same time becoming affordable and widely available.

SiO2/TiO2 Nanocomposite Films on Polystyrene for Light-Induced Cell Detachment Application

Light-induced cell detachment shows much potential in in vitro cell culture and calls for high-performance light-responsive films. In this study, a smooth and dense SiO₂/TiO₂ nanocomposite thin film with thickness of around 250 nm was first fabricated on H₂O₂ treated polystyrene (PS) substrate via a low-temperature sol-gel method. It was observed that the film could well-adhere on the PS surface and the bonding strength became increasingly high with the increase of SiO₂ content. The peeling strength and shear strength reached 3.05 and 30.02 MPa, respectively. It was observed the surface of the film could transform into superhydrophilic upon 20 min illumination of ultraviolet with a wavelength of 365 nm (UV365). In cell culture, cells, i.e., NIH3T3 and MC3T3-E1 cells, cultured on SiO₂/TiO₂ nanocomposite film were easily detached after 10 min of UV365 illumination; the detachment rates reached 90.8% and 88.6%, respectively. Correspondingly, continuous cell sheets with good viability were also easily obtained through the same way. The present work shows that SiO₂/TiO₂ nanocomposite thin film could be easily prepared on polymeric surface at low temperature. The corresponding film exhibits excellent biocompatibility, high bonding strength, and good light responses. It could be a good candidate for the surface of cell culture utensils with light-induced cell detachment property.

Laminin-521 Promotes Rat Bone Marrow Mesenchymal Stem Cell Sheet Formation on Light-Induced Cell Sheet Technology

Rat bone marrow mesenchymal stem cell sheets (rBMSC sheets) are attractive for cell-based tissue engineering. However, methods of culturing rBMSC sheets are critically limited. In order to obtain intact rBMSC sheets, a light-induced cell sheet method was used in this study. TiO₂ nanodot films were coated with (TL) or without (TN) laminin-521. We investigated the effects of laminin-521 on rBMSCs during cell sheet culturing. The fabricated rBMSC sheets were subsequently assessed to study cell sheet viability, reattachment ability, cell sheet thickness, collagen type I deposition, and multilineage potential. The results showed that laminin-521 could promote the formation of rBMSC sheets with good viability under hyperconfluent conditions. Cell sheet thickness increased from an initial 26.7 ± 1.5 μm (day 5) up to 47.7 ± 3.0 μm (day 10). Moreover, rBMSC sheets maintained their potential of osteogenic, adipogenic, and chondrogenic differentiation. This study provides a new strategy to obtain rBMSC sheets using light-induced cell sheet technology.

Facile Cell Sheet Harvest and Translocation Mediated by a Thermally Expandable Hydrogel with Controlled Cell Adhesion

Facile cell sheet translocation system is developed based on a thermally expandable hydrogel with modular cell adhesion favorable for both robust cell sheet formation and harvest. Efficient translocation is achieved at moderate cell-substrate interaction, which can be tuned by two-step reactions of mussel-inspired coating.

Regulating Cell Apoptosis on Layer-by-Layer Assembled Multilayers of Photosensitizer-Coupled Polypeptides and Gold Nanoparticles

The design of advanced, nanostructured materials by layer-by-layer (LbL) assembly at the molecular level is of great interest because of the broad application of these materials in the biomedical field especially in regulating cell growth, adhesion, movement, differentiation and detachment. Here, we fabricated functional hybrid multilayer films by LbL assembly of biocompatible photosensitizer-coupled polypeptides and collagen-capped gold nanoparticles. The resulting multilayer film can well accommodate cells for adhesion, growth and proliferation. Most significantly, controlled cell apoptosis (detachment) and patterning of the multilayer film is achieved by a photochemical process yielding reactive oxygen species (ROS). Moreover, the site and shape of apoptotic cells can be controlled easily by adjusting the location and shape of the laser beam. The LbL assembled multilayer film with integration of functions provides an efficient platform for regulating cell growth and apoptosis (detachment).

Current View on Osteogenic Differentiation Potential of Mesenchymal Stromal Cells Derived from Placental Tissues

Mesenchymal stromal cells (MSC) isolated from human term placental tissues possess unique characteristics, including their peculiar immunomodulatory properties and their multilineage differentiation potential. The osteogenic differentiation capacity of placental MSC has been widely disputed, and continues to be an issue of debate. This review will briefly discuss the different MSC populations which can be obtained from different regions of human term placenta, along with their unique properties, focusing specifically on their osteogenic differentiation potential. We will present the strategies used to enhance osteogenic differentiation potential in vitro, such as through the selection of subpopulations more prone to differentiate, the modification of the components of osteo-inductive medium, and even mechanical stimulation. Accordingly, the applications of three-dimensional environments in vitro and in vivo, such as non-synthetic, polymer-based, and ceramic scaffolds, will also be discussed, along with results obtained from pre-clinical studies of placental MSC for the regeneration of bone defects and treatment of bone-related diseases.

Controlled Cell Growth and Cell Migration in Periodic Mesoporous Organosilica/Alginate Nanocomposite Hydrogels

Nanocomposite (NC) hydrogels with different periodic mesoporous organosilica (PMO) concentrations and a NC hydrogel bilayer with various PMO concentrations inside the layers of the hydrogel matrix are prepared. The effect of the PMO concentration on cell growth and migration of cells is reported. The cells migrate in the bilayer NC hydrogel towards higher PMO concentrations and from cell culture plates to NC hydrogel scaffolds.

The Effects of TiO2 Nanodot Films with RGD Immobilization on Light-Induced Cell Sheet Technology

Cell sheet technology is a new strategy in tissue engineering which could be possible to implant into the body without a scaffold. In order to get an integrated cell sheet, a light-induced method via UV365 is used for cell sheet detachment from culture dishes. In this study, we investigated the possibility of cell detachment and growth efficiency on TiO₂ nanodot films with RGD immobilization on light-induced cell sheet technology. Mouse calvaria-derived, preosteoblastic (MC3T3-E1) cells were cultured on TiO₂ nanodot films with (TR) or without (TN) RGD immobilization. After cells were cultured with or without 5.5 mW/cm² UV365 illumination, cell morphology, cell viability, osteogenesis related RNA and protein expression, and cell detachment ability were compared, respectively. Light-induced cell detachment was possible when cells were cultured on TR samples. Also, cells cultured on TR samples showed better cell viability, alongside higher protein and RNA expression than on TN samples. This study provides a new biomaterial for light-induced cell/cell sheet harvesting.

Controlling cell migration and adhesion into a scaffold by external electric currents

Fabrication of more complex tissue-engineered structures, resembling the tissues and organs in vivo requires combining more than one cell type within the same construct. This can be achieved by designing and fabricating complex scaffolds with asymmetric properties but controlled arrangement of cells within the scaffold could also be realized by using electric current. External electric currents are able to modify cell adhesion, orientation and migration and this can be used for influencing cell location within a scaffold. In this paper we studied the effect of an electric current on cell migration and adhesion into a three-dimensional scaffold through a conductive mesh.

Directing stem cell differentiation by changing the molecular mobility of supramolecular surfaces

Polymer surfaces with a wide range of hydrated surface mobility are developed by a simple deposition method with supramolecular block copolymers. The morphologies of adhering stem cells are greatly dependent on the surface mobility of polymers, and this induces significant changes in the cytoskeletal signaling pathway to direct the downstream stem cell differentiation.

Origin stories from a regional placenta tissue collection

Twenty-three years ago when women and their children were recruited to a longitudinal genetic epidemiological study during pregnancy, placentas were collected at birth. This paper explores the history of a regional placenta biobank and contemporary understandings of its value for the constitution of a research population. We draw on interviews with some of the mothers and those responsible for the establishment and curation of the placenta collection in order to explore the significance and meaning of the collection for them. Given its capacity to stand in for the study cohort of mothers and children, we argue that the material significance of the placenta biobank as a research tool seems far less important than the work it does in constituting a population. The stories about this collection may be understood within the wider context of developments in biobanking and the bioeconomy.

Fundamentals and application of magnetic particles in cell isolation and enrichment: a review

Magnetic sorting using magnetic beads has become a routine methodology for the separation of key cell populations from biological suspensions. Due to the inherent ability of magnets to provide forces at a distance, magnetic cell manipulation is now a standardized process step in numerous processes in tissue engineering, medicine, and in fundamental biological research. Herein we review the current status of magnetic particles to enable isolation and separation of cells, with a strong focus on the fundamental governing physical phenomena, properties and syntheses of magnetic particles and on current applications of magnet-based cell separation in laboratory and clinical settings. We highlight the contribution of cell separation to biomedical research and medicine and detail modern cell-separation methods (both magnetic and non-magnetic). In addition to a review of the current state-of-the-art in magnet-based cell sorting, we discuss current challenges and available opportunities for further research, development and commercialization of magnetic particle-based cell-separation systems.

Saccharides and temperature dual-responsive hydrogel layers for harvesting cell sheets

A novel non-invasive approach for harvesting cell sheets was demonstrated just by adding saccharide biomolecules into cell culture medium and without reduction of the temperature.

Perspective on microfluidic cell separation: a solved problem?

The purification and sorting of cells using microfluidic methodologies has been a remarkably active area of research over the past decade. Much of the scientific and technological work associated with microfluidic cell separation has been driven by needs in clinical diagnostics and therapeutic monitoring, most notably in the context of circulating tumor cells. The last several years have seen advances in a broad range of separation modalities ranging from miniaturized analogs of established techniques such as fluorescence- and magnetic-activated cell sorting (FACS and MACS, respectively), to more specialized approaches based on affinity, dielectrophoretic mobility, and inertial properties of cells. With several of these technologies nearing commercialization, there is a sense that the field of microfluidic cell separation has achieved a high level of maturity over an unusually short span of time. In this Perspective, we set the stage by describing major scientific and technological advances in this field and ask what the future holds. While many scientific questions remain unanswered and new compelling questions will undoubtedly arise, the relative maturity of this field poses some unique challenges.