Exploring the mesenchymal stem cell niche using high throughput screening

Photobiomodulation and low-intensity pulsed ultrasound synergistically enhance dental mesenchymal stem cells viability, migration and differentiation: an invitro study

Novel methods and technologies that improve mesenchymal stem cells (MSCs) proliferation and differentiation properties are required to increase their clinical efficacy. Photobiomodulation (PBM) and low-intensity pulsed ultrasound (LIPUS) are two strategies that can be used to enhance the regenerative properties of dental MSCs. This study evaluated the cytocompatibility and osteo/odontogenic differentiation of dental pulp, periodontal ligament, and gingival MSCs after stimulation by either PBM or LIPUS and their combined effect. MTT assay, cell migration assay, osteo/odontogenic differentiation by AR staining and ALP activity, and expression of osteo/odontogenic markers (OPG, OC, RUNX2, DSPP, DMP1) by RT-qPCR were evaluated. Statistical analysis was performed using ANOVA, followed by Tukey's post hoc test, with a p-value of less than 0.05 considered significant. The results showed that combined stimulation by PBM and LIPUS resulted in significantly the highest viability of MSCs, the fastest migration, the most dense AR staining, the most increased ALP activity, and the most elevated levels of osteogenic and odontogenic markers. The synergetic stimulation of PBM and LIPUS can be utilized in cell-based regenerative approaches to promote the properties of dental MSCs.

Applications of Bioinspired Platforms for Enhancing Immunomodulatory Function of Mesenchymal Stromal Cells

Mesenchymal stromal cells (MSCs) have attracted scientific and medical interest due to their self-renewing properties, pluripotency, and paracrine function. However, one of the main limitations to the clinical application of MSCs is their loss of efficacy after transplantation in vivo. Various bioengineering technologies to provide stem cell niche-like conditions have the potential to overcome this limitation. Here, focusing on the stem cell niche microenvironment, studies to maximize the immunomodulatory potential of MSCs by controlling biomechanical stimuli, including shear stress, hydrostatic pressure, stretch, and biophysical cues, such as extracellular matrix mimetic substrates, are discussed. The application of biomechanical forces or biophysical cues to the stem cell microenvironment will be beneficial for enhancing the immunomodulatory function of MSCs during cultivation and overcoming the current limitations of MSC therapy.

Human adipose-derived mesenchymal stromal cells from face and abdomen undergo replicative senescence and loss of genetic integrity after long-term culture

Body fat depots are heterogeneous concerning their embryonic origin, structure, exposure to environmental stressors, and availability. Thus, investigating adipose-derived mesenchymal stromal cells (ASCs) from different sources is essential to standardization for future therapies. In vitro amplification is also critical because it may predispose cell senescence and mutations, reducing regenerative properties and safety. Here, we evaluated long-term culture of human facial ASCs (fASCs) and abdominal ASCs (aASCs) and showed that both met the criteria for MSCs characterization but presented differences in their immunophenotypic profile, and differentiation and clonogenic potentials. The abdominal tissue yielded more ASCs, and these had higher proliferative potential, but facial cells displayed fewer mitotic errors at higher passages. However, both cell types reduced clonal efficiency over time and entered replicative senescence around P12, as evaluated by progressive morphological alterations, reduced proliferative capacity, and SA-β-galactosidase expression. Loss of genetic integrity was detected by a higher proportion of cells showing nuclear alterations and γ-H2AX expression. Our findings indicate that the source of ASCs can substantially influence their phenotype and therefore should be carefully considered in future cell therapies, avoiding, however, long-term culture to ensure genetic stability.

Injections in the osteoarthritic knee: a review of current treatment options

Knee osteoarthritis is a degenerative condition characterized by progressive cartilage degradation, subchondral damage, and bone remodelling. Among the approaches implemented to achieve symptomatic and functional improvements, injection treatments have gained increasing attention due to the possibility of intra-articular delivery with reduced side effects compared to systemic therapies.

In addition to well-established treatment options such as hyaluronic acid (HA), cortico-steroids (CS) and oxygen-ozone therapy, many other promising products have been employed in the last decades such as polydeoxyribonucleotide (PDRN) and biologic agents such as platelet-rich plasma (PRP) and mesenchymal stem cells (MSCs). Moreover, ultrasound-guided intra-meniscal injection and X-ray-guided subchondral injection techniques have been introduced into clinical practice.

Even when not supported by high evidence consensus, intra-articular CS and HA injections have gained precise indications for symptomatic relief and clinical improvement in OA. Biological products are strongly supported by in vitro evidence but there is still a lack of robust clinical evidence. PRP and MSCs seem to relieve OA symptoms through a regulation of the joint homeostasis, even if their capability to restore articular cartilage is still to be proved in vivo.

Due to increasing interest in the subchondral bone pathology, subchondral injections have been developed with promising results in delaying joint replacement. Nevertheless, due to their recent development and the heterogeneity of the injected products (biologic agents or calcium phosphate), this approach still lacks strong enough evidence to be fully endorsed.

Combined biological treatments, nano-molecular approaches, monoclonal antibodies and ‘personalized’ target therapies are currently under development or under investigation with the aim of expanding our armamentarium against knee OA.

Cite this article: EFORT Open Rev 2021;6:501-509. DOI: 10.1302/2058-5241.6.210026

High-Throughput Methods in the Discovery and Study of Biomaterials and Materiobiology

The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials.

The Use of Microfabrication Techniques for the Design and Manufacture of Artificial Stem Cell Microenvironments for Tissue Regeneration

The recapitulation of the stem cell microenvironment is an emerging area of research that has grown significantly in the last 10 to 15 years. Being able to understand the underlying mechanisms that relate stem cell behavior to the physical environment in which stem cells reside is currently a challenge that many groups are trying to unravel. Several approaches have attempted to mimic the biological components that constitute the native stem cell niche, however, this is a very intricate environment and, although promising advances have been made recently, it becomes clear that new strategies need to be explored to ensure a better understanding of the stem cell niche behavior. The second strand in stem cell niche research focuses on the use of manufacturing techniques to build simple but functional models; these models aim to mimic the physical features of the niche environment which have also been demonstrated to play a big role in directing cell responses. This second strand has involved a more engineering approach in which a wide set of microfabrication techniques have been explored in detail. This review aims to summarize the use of these microfabrication techniques and how they have approached the challenge of mimicking the native stem cell niche.

The lower in vitro chondrogenic potential of canine adipose tissue-derived mesenchymal stromal cells (MSC) compared to bone marrow-derived MSC is not improved by BMP-2 or BMP-6

Mesenchymal stromal cells (MSC) are used for cell-based treatment for canine osteoarthritis (OA). Compared with human MSCs, detailed information on the functional characterisation of canine MSCs is limited. In particular, the chondrogenic differentiation of canine adipose tissue-derived MSCs (cAT-MSCs) is challenging. In this study, we aimed to compare cAT-MSCs with bone marrow-derived MSCs (cBM-MSCs), focusing specifically on their in vitro chondrogenic potential, with or without bone morphogenetic proteins (BMP). cBM-MSCs and cAT-MSCs were characterised using flow cytometry and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). The chondrogenic differentiation potential of all cMSC preparations in the presence of TGF-β1 alone or when supplemented with 10, 100, or 250 ng/mL BMP-2 or BMP-6 was investigated using RT-qPCR, and biochemical, histochemical and immunohistological analyses. Both cBM-MSCs and cAT-MSCs expressed the surface markers CD90, CD73, and CD29, and were negative for CD45 and CD34, although the expression of CD73 and CD271 varied with donor and tissue origin. Interestingly, expression of ACAN and SOX9 was higher in cBM-MSCs than cAT-MSCs. In contrast with cBM-MSCs, cAT-MSCs could not differentiate toward the chondrogenic lineage without BMP-2/-6, and their in vitro chondrogenesis was inferior to cBM-MSCs with BMP-2/-6. Thus, cAT-MSCs have lower in vitro chondrogenic capacity than cBM-MSC under the studied culture conditions with 10, 100, or 250 ng/mL BMP-2 or BMP-6. Therefore, further characterisation is necessary to explore the potential of cAT-MSCs for cell-based OA treatments.

Capturing instructive cues of tissue microenvironment by silica bioreplication

Cells in tissues are enveloped by an instructive niche made of the extracellular matrix. These instructive niches contain three general types of information: topographical, biochemical and mechanical. While the combined effects of these three factors are widely studied, the functions of each individual one has not been systematically characterised, because it is impossible to alter a single factor in a tissue microenvironment without simultaneously affecting the other two. Silica BioReplication (SBR) is a process that converts biological samples into silica, faithfully preserving the original topography at the nano-scale. We explored the use of this technique to generate inorganic replicas of intact mammalian tissues, including tendon, cartilage, skeletal muscle and spinal cord. Scanning electron and atomic force microscopy showed that the resulting replicas accurately preserved the three-dimensional ultrastructure of each tissue, while all biochemical components were eradicated by calcination. Such properties allowed the uncoupling the topographical information of a tissue microenvironment from its biochemical and mechanical components. Here, we showed that human mesenchymal stem cells (MSC) cultured on the replicas of different tissues displayed vastly different morphology and focal adhesions, suggesting that the topography of the tissue microenvironment captured by SBR could profoundly affect MSC biology. MSC cultured on tendon replica elongated and expressed tenocytes marker, while MSC on the spinal cord replica developed into spheroids that resembled neurospheres, in morphology and in the expression of neurosphere markers, and could be further differentiated into neuron-like cells. This study reveals the significance of topographical cues in a cell niche, as tissue-specific topography was sufficient in initiating and directing differentiation of MSC, despite the absence of any biochemical signals. SBR is a convenient and versatile method for capturing this topographical information, facilitating the functional characterisation of cell niches. STATEMENT OF SIGNIFICANCE: Various studies have shown that three major factors, topographical, biochemical and mechanical, in a tissue microenvironment (TME) are essential for cellular homeostasis and functions. Current experimental models are too simplistic to represent the complexity of the TME, hindering the detailed understanding of its functions. In particular, the importance each factor in a tissue microenvironment have not been individually characterised, because it is challenging to alter one of these factors without simultaneously affecting the other two. Silica bioreplication (SBR) is a process that converts biological samples into silica replicas with high structural fidelity. SBR is a convenient and versatile method for capturing this topographical information on to a biologically inert material, allowing the functional characterisation of the architecture of a TME.

In vitro comparative study of human mesenchymal stromal cells from dermis and adipose tissue for application in skin wound healing

Novel strategies combining cell therapy, tissue engineering, and regenerative medicine have been developed to treat major skin wounds. Although mesenchymal stromal cells (MSCs) from different tissues have similar stem cell features, such as self-renewing mesodermal differentiation potential and expression of immunophenotypic markers, they also have distinct characteristics. Therefore, we aimed to characterize the application of MSCs derived from the dermis and adipose tissue (DSCs and ASCs, respectively) in cutaneous wound healing by in vitro approaches. Human DSC and ASC were obtained and evaluated for their isolation efficiency, stemness, proliferative profile, and genetic stability over time in culture. The ability of wound closure was first assessed by direct cell scratch assay. The paracrine effects of DSC- and ASC-conditioned medium in dermal fibroblasts and keratinocytes and in the induction of tubule formation were also investigated. Although the ASC isolation procedures resulted in 100 times more cells than DSC, the latter had a higher proliferation rate in culture. Both presented low frequency of nuclear alterations over time in culture and showed similar characteristics of stem cells, such as expression of immunophenotypic markers and differentiation potential. DSCs showed increased healing capacity, and their conditioned media had greater paracrine effect in closing the wound of dermal fibroblasts and keratinocytes and in inducing angiogenesis. In conclusion, the therapeutic potential of MSCs is influenced by the obtainment source. Both ASCs and DSCs are applicable for skin wound healing; however, DSCs have an improved potential and should be considered for future applications in cell therapy.

High-Throughput Assessment and Modeling of a Polymer Library Regulating Human Dental Pulp-Derived Stem Cell Behavior

The identification of biomaterials that modulate cell responses is a crucial task for tissue engineering and cell therapy. The identification of novel materials is complicated by the immense number of synthesizable polymers and the time required for testing each material experimentally. In the current study, polymeric biomaterial-cell interactions were assessed rapidly using a microarray format. The attachment, proliferation, and differentiation of human dental pulp stem cells (hDPSCs) were investigated on 141 homopolymers and 400 diverse copolymers. The copolymer of isooctyl acrylate and 2-(methacryloyloxy)ethyl acetoacetate achieved the highest attachment and proliferation of hDPSC, whereas high cell attachment and differentiation of hDPSC were observed on the copolymer of isooctyl acrylate and trimethylolpropane ethoxylate triacrylate. Computational models were generated, relating polymer properties to cellular responses. These models could accurately predict cell behavior for up to 95% of materials within a test set. The models identified several functional groups as being important for supporting specific cell responses. In particular, oxygen-containing chemical moieties, including fragments from the acrylate/acrylamide backbone of the polymers, promoted cell attachment. Small hydrocarbon fragments originating from polymer pendant groups promoted cell proliferation and differentiation. These computational models constitute a key tool to direct the discovery of novel materials within the enormous chemical space available to researchers.

Intratendinous adipose-derived stromal vascular fraction (SVF) injection provides a safe, efficacious treatment for Achilles tendinopathy: results of a randomized controlled clinical trial at a 6-month follow-up

PURPOSE

Although platelet-rich plasma (PRP) injection has shown controversial results for the treatment of Achilles tendinopathy, it remains the most used biological treatment. Recent findings seem to demonstrate that the stromal vascular fraction (SVF) within adipose tissue may counteract the impaired tendon homeostasis. The aim of this study was to prospectively compare the efficacy of PRP and SVF injection for the treatment of non-insertional Achilles tendinopathy.

METHODS

Fourty-four patients were recruited in the study; 23 of them were assigned to the PRP group whereas 21 to the SVF group, treated unilaterally or bilaterally for a total of 28 tendons per group. All patients (age 18-55 years) were clinically assessed pre-operatively and at 15, 30, 60, 120 and 180 days from treatment, using the VAS pain scale, the VISA-A, the AOFAS Ankle-Hindfoot Score and the SF-36 form. The patients were also evaluated by ultrasound and magnetic resonance before treatment and after 4 (US only) and 6 months.

RESULTS

Both treatments allowed for a significant improvement with respect to baseline. Comparing the two groups, VAS, AOFAS and VISA-A scored significantly better at 15 and 30 days in the SVF in comparison to PRP group (p < 0.05). At the following time points the scores were not significantly different between the two groups. No correlation has been found between clinical and radiological findings.

CONCLUSIONS

Both PRP and SVF were safe, effective treatments for recalcitrant Achilles tendinopathy. The patients treated with SVF obtained faster results, thus suggesting that such a treatment should be taken into consideration for those patients who require an earlier return to daily activities or sport.

LEVEL OF EVIDENCE

Randomized Controlled Clinical Trial, Level 1.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Synthetic Biomaterials to Rival Nature's Complexity-a Path Forward with Combinatorics, High-Throughput Discovery, and High-Content Analysis

Cells in tissue receive a host of soluble and insoluble signals in a context-dependent fashion, where integration of these cues through a complex network of signal transduction cascades will define a particular outcome. Biomaterials scientists and engineers are tasked with designing materials that can at least partially recreate this complex signaling milieu towards new materials for biomedical applications. In this progress report, recent advances in high throughput techniques and high content imaging approaches that are facilitating the discovery of efficacious biomaterials are described. From microarrays of synthetic polymers, peptides and full-length proteins, to designer cell culture systems that present multiple biophysical and biochemical cues in tandem, it is discussed how the integration of combinatorics with high content imaging and analysis is essential to extracting biologically meaningful information from large scale cellular screens to inform the design of next generation biomaterials.

Nanotopography mediated osteogenic differentiation of human dental pulp derived stem cells

Advanced medical devices, treatments and therapies demand an understanding of the role of interfacial properties on the cellular response. This is particularly important in the emerging fields of cell therapies and tissue regeneration. In this study, we evaluate the role of surface nanotopography on the fate of human dental pulp derived stem cells (hDPSC). These stem cells have attracted interest because of their capacity to differentiate to a range of useful lineages but are relatively easy to isolate. We generated and utilized density gradients of gold nanoparticles which allowed us to examine, on a single substrate, the influence of nanofeature density and size on stem cell behavior. We found that hDPSC adhered in greater numbers and proliferated faster on the sections of the gradients with higher density of nanotopography features. Furthermore, greater surface nanotopography density directed the differentiation of hDPSC to osteogenic lineages. This study demonstrates that carefully tuned surface nanotopography can be used to manipulate and guide the proliferation and differentiation of these cells. The outcomes of this study can be important in the rational design of culture substrates and vehicles for cell therapies, tissue engineering constructs and the next generation of biomedical devices where control over the growth of different tissues is required.

The effect of histone deacetylase inhibitor trichostatin A on porcine mesenchymal stem cell transcriptome

The use of histone deacetylase inhibitors such as trichostatin A (TSA) for epigenetic transformation of mesenchymal stem cells (MSCs), whose nuclei will be transferred into enucleated oocytes, is a novel approach in research involving somatic cell cloning of pigs and other mammalian species. Although the effectiveness of TSA in cloning applications was confirmed, processes and mechanisms underlying achieved effects are not yet fully understood, especially for pig MSCs. To contribute to this knowledge, in this study we performed a comprehensive transcriptome analysis using high-throughput sequencing of pig bone-marrow derived MSCs, both treated and untreated with TSA, and evaluated the effect of TSA administration on their transcription profile after 24 h of in vitro culture. The expression of selected positive and negative mesenchymal surface antigens was also evaluated in these cells by flow cytometry. Subsequently, the stability of induced expression changes was evaluated after another 55-72 h of culture without TSA. The results of this study showed that TSA does not affect the expression of the selected surface antigens related to MSC mesenchymal stemness origin, namely: CD90 (positive marker), CD31 and CD34 (negative markers) and has a wide stimulating effect on MSCs transcription, affecting genes across the whole genome with some minor signs of site-specific acting in regions on SSC2 and SSC6. TSA turned out to have a higher impact on already expressed genes with only minor abilities to induce expression of silenced genes. Genes with expression affected by TSA were related to a wide range of biological processes, however, we found some evidence for specific stimulation of genes associated with development, differentiation, neurogenesis or myogenesis. TSA also seemed to interfere with Wnt signaling pathways by upregulation of several engaged genes. The analysis of cell transcriptome after prolonged culture following the TSA removal, showed that the expression level of majority of genes affected by TSA is restored to the initial level. Nonetheless, the set of about six hundred genes responsible for e.g. adhesion, signal transduction and cell communication was altered even after 55-72 h of culture without TSA. TSA also enhanced expression of some of pluripotency marker genes (FGF2, LIF, TERT) but their expression was stabilized during further culture without TSA. The detailed analysis of factors connected with neuron-like differentiation allowed us to assume that TSA mostly stimulates neurogenic differentiation pathway in the pig MSCs possibly through interaction with Wnt-mediated signaling and thus triggers mechanisms conducive to epigenetic reprograming.

The Horizon of Materiobiology: A Perspective on Material-Guided Cell Behaviors and Tissue Engineering

Although the biological functions of cell and tissue can be regulated by biochemical factors (e.g., growth factors, hormones), the biophysical effects of materials on the regulation of biological activity are receiving more attention. In this Review, we systematically summarize the recent progress on how biomaterials with controllable properties (e.g., compositional/degradable dynamics, mechanical properties, 2D topography, and 3D geometry) can regulate cell behaviors (e.g., cell adhesion, spreading, proliferation, cell alignment, and the differentiation or self-maintenance of stem cells) and tissue/organ functions. How the biophysical features of materials influence tissue/organ regeneration have been elucidated. Current challenges and a perspective on the development of novel materials that can modulate specific biological functions are discussed. The interdependent relationship between biomaterials and biology leads us to propose the concept of "materiobiology", which is a scientific discipline that studies the biological effects of the properties of biomaterials on biological functions at cell, tissue, organ, and the whole organism levels. This Review highlights that it is more important to develop ECM-mimicking biomaterials having a self-regenerative capacity to stimulate tissue regeneration, instead of attempting to recreate the complexity of living tissues or tissue constructs ex vivo. The principles of materiobiology may benefit the development of novel biomaterials providing combinative bioactive cues to activate the migration of stem cells from endogenous reservoirs (i.e., cell niches), stimulate robust and scalable self-healing mechanisms, and unlock the body's innate powers of regeneration.

High-throughput superhydrophobic microwell arrays for investigating multifactorial stem cell niches

Understanding the complex regulatory network that determines stem cell fates requires a high-throughput platform that can generate a large number of precisely controlled microenvironments representing multiple factors for stem cell culture and analysis. Here, we developed a superhydrophobic microwell array chip on which the culture conditions in each microwell can be spontaneously isolated by a grafted layer of superhydrophobic polymers. Simple steps for medium exchange were developed to facilitate the on-chip culture of both adherent and non-adherent cells for up to six days without compromising cell viability and functionality. The culture conditions in each microwell were facilely manipulated using a robotic spotter. Stem cell niches combining soluble factors, extracellular matrices and microtopographic cues were generated on a single 512-well SMARchip and their combinatorial effects on the fate of mouse Oct4-EGFP iPSCs were systematically probed. We observed significant differences in iPSC pluripotency and proliferation between adherent flat and suspended spherical cultures on our platform, which might provide insights into improvement of stem cell technologies.

Regenerative approaches for the treatment of early OA

The diagnosis and the prompt treatment of early osteoarthritis (OA) represent vital steps for delaying the onset and progression of fully blown OA, which is the most common form of arthritis, involving more than 10 % of the world's population older than 60 years of age. Nonsurgical treatments such as physiotherapy, anti-inflammatory medications, and other disease-modifying drugs all have modest and short-lasting effect. In this context, the biological approaches have recently gained more and more attention. Growth factors, blood derivatives, such as platelet concentrates, and mesenchymal adult stem cells, either expanded or freshly isolated, are advocated amongst the most promising tool for the treatment of OA, especially in the early phases. Primarily targeted towards focal cartilage defects, these biological agents have indeed recently showed promising results to relieve pain and reduce inflammation in patients with more advanced OA as well, with the final aim to halt the progression of the disease and the need for joint replacement. However, despite of a number of satisfactory in vitro and pre-clinical studies, the evidences are still limited to support their clinical efficacy in OA setting.

Synergistic influence of collagen I and BMP 2 drives osteogenic differentiation of mesenchymal stem cells: A cell microarray analysis

Cell microarrays are a novel platform for the high throughput discovery of new biomaterials. By re-creating a multitude of cell microenvironments on a single slide, this approach can identify the optimal surface composition to drive a desired cell response. To systematically study the effects of molecular microenvironments on stem cell fate, we designed a cell microarray based on parallel exposure of mesenchymal stem cells (MSCs) to surface-immobilised collagen I (Coll I) and bone morphogenetic protein 2 (BMP 2). This was achieved by means of a reactive coating on a slide surface, enabling the covalent anchoring of Coll I and BMP 2 as microscale spots printed by a robotic contact printer. The surface between the printed protein spots was passivated using poly (ethylene glycol) bisamine 10,000Da (A-PEG). MSCs were then captured and cultured on array spots composed of binary mixtures of Coll I and BMP 2, followed by automated image acquisition and quantitative, multi-parameter analysis of cellular responses. Surface compositions that gave the highest osteogenic differentiation were determined using Runx2 expression and calcium deposition. Quantitative single cell analysis revealed subtle concentration-dependent effects of surface-immobilised proteins on the extent of osteogenic differentiation obscured using conventional analysis. In particular, the synergistic interaction of Coll I and BMP 2 in supporting osteogenic differentiation was confirmed. Our studies demonstrate the value of cell microarray platforms to decipher the combinatorial interactions at play in stem cell niche microenvironments.

High throughput approaches for controlled stem cell differentiation

Stem cells have unique ability to undergo self-renewal indefinitely in culture and potential to differentiate into almost all cell types in the human body. However, the developing a method for efficiently differentiating or manipulating these stem cells for therapeutic purposes remains a challenging problem. Pluripotent stem cells, as well as adult stem cells, require biological cues for their proliferation and differentiation. These cues are largely controlled by cell-cell, cell-insoluble factors (such as extracellular matrix), and cell-soluble factors (such as cytokine or growth factors) interactions. In this review, we describe a state of research on various stem cell-based tissue engineering applications and high throughput strategies for developing synthetic or biosynthetic microenvironments to allow efficient commitments in stem cells.

STATEMENT OF SIGNIFICANCE

Nowadays, pluripotency of stem cells have received much attention to use therapeutic purpose. However, a major difficulty with stem cell therapy is to control its differentiation through desired cells or tissues. In other words, various microenvironment factors are involved during stem cell differentiation, including dimensionality, growth factors, cell junctions, nutritional status, matrix stiffness, matrix composition, mechanical stress, and cell-matrix adhesion. Therefore, researchers have engineered a variety of platforms to enable controlling and monitoring bioactive factors to induce stem cell commitment. In this review, we report on recent advancements in a novel technology based on high-throughput strategies for stem cell-based tissue engineering applications.

Decoupling the Direct and Indirect Biological Effects of ZnO Nanoparticles Using a Communicative Dual Cell-Type Tissue Construct

While matter at the nanoscale can be manipulated, the knowledge of the interactions between these nanoproducts and the biological systems remained relatively laggard. Current nanobiology study is rooted on in vitro study using conventional 2D cell culture model. A typical study employs monolayer cell culture that simplifies the real context of which to measure any nanomaterial effect; unfortunately, this simplification also demonstrated the limitations of 2D cell culture in predicting the actual biological response of some tissues. In fact, some of the characteristics of tissue such as spatial arrangement of cells and cell-cell interaction, which are simplified in 2D cell culture model, play important roles in how cells respond to a stimulus. To more accurately recapitulate the features and microenvironment of tissue for nanotoxicity assessments, an improved organotypic-like in vitro multicell culture system to mimic the kidney endoepithelial bilayer is introduced. Results showed that important nano-related parameters such as the diffusion, direct and indirect toxic effects of ZnO nanoparticles can be studied by combining this endoepithelial bilayer tissue model and traditional monolayer culture setting.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Ultrasound Stimulation of Different Dental Stem Cell Populations: Role of Mitogen-activated Protein Kinase Signaling

INTRODUCTION

Mesenchymal stem cells (MSCs) from dental tissues may respond to low-intensity pulsed ultrasound (LIPUS) treatment, potentially providing a therapeutic approach to promoting dental tissue regeneration. This work aimed to compare LIPUS effects on the proliferation and MAPK signaling in MSCs from rodent dental pulp stem cells (DPSCs) compared with MSCs from periodontal ligament stem cells (PDLSCs) and bone marrow stem cells (BMSCs).

METHODS

Isolated MSCs were treated with 1-MHz LIPUS at an intensity of 250 or 750 mW/cm2 for 5 or 20 minutes. Cell proliferation was evaluated by 5-bromo-2-deoxyuridine (BrdU) staining after 24 hours of culture following a single LIPUS treatment. Specific ELISAs were used to determine the total and activated p38, ERK1/2, and JNK MAPK signaling proteins up to 4 hours after treatment. Selective MAPK inhibitors PD98059 (ERK1/2), SB203580 (p38), and SP600125 (JNK) were used to determine the role of activation of the particular MAPK pathways.

RESULTS

The proliferation of all MSC types was significantly increased after LIPUS treatment. LIPUS at a 750-mW/cm2 dose induced the greatest effects on DPSCs. BMSC proliferation was stimulated in equal measures by both intensities, whereas 250 mW/cm2 LIPUS exposure exerted maximum effects on PDLSCs. ERK1/2 was activated immediately in DPSCs after treatment. Concomitantly, DPSC proliferation was specifically modulated by ERK1/2 inhibition, whereas p38 and JNK inhibition exerted no effects. In BMSCs, JNK MAPK signaling was LIPUS activated, and the increase in proliferation was blocked by specific inhibition of the JNK pathway. In PDLSCs, JNK MAPK signaling was activated immediately after LIPUS, whereas p-p38 MAPK increased significantly in these cells 4 hours after exposure. Correspondingly, JNK and p38 inhibition modulated LIPUS-stimulated PDLSC proliferation.

CONCLUSIONS

LIPUS promoted MSC proliferation in an intensity and cell-specific dependent manner via activation of distinct MAPK pathways.

Role of Endothelial Progenitor Cells in Maintaining Stemness and Enhancing Differentiation of Mesenchymal Stem Cells by Indirect Cell-Cell Interaction

A hot issue in current research regarding stem cells for regenerative medicine is the retainment of the stemness and multipotency of stem cell. Endothelial progenitor cells (EPCs) are characterized by an angiogenic switch that induces angiogenesis and further ameliorates the local microenvironment in ischemic organs. This study investigated whether EPCs could modulate the multipotent and differential abilities of mesenchymal stem cells (MSCs) in vitro and in vivo. We established an EPC/MSC indirect Transwell coculture system and then examined the effects of EPCs on the regulation of MSC biological properties in vitro and bone formation in vivo. The in vitro studies showed that cocultured MSCs (coMSCs) display no overt changes in cell morphology but an enhanced MSC phenotype compared with monocultured MSCs (monoMSCs). Our studies regarding the cellular, molecular, and protein characteristics of coMSCs and monoMSCs demonstrated that EPCs greatly promote the proliferation and differentiation potentials of coMSCs under indirect coculture condition. The expression of the pluripotency factors OCT4, SOX2, Nanog, and Klf4 was also upregulated in coMSCs. Furthermore, coMSCs combined with fibrin glue showed improved bone regeneration when used to repair rat alveolar bone defects compared with monoMSC grafts in vivo. This study is the first to demonstrate that EPCs have dynamic roles in maintaining MSC stemness and regulating MSC differentiation potential.

A combinatorial variation in surface chemistry and pore size of three-dimensional porous poly(ε-caprolactone) scaffolds modulates the behaviors of mesenchymal stem cells

Biomaterial properties play significant roles in controlling cellular behaviors. The objective of the present study was to investigate how pore size and surface chemistry of three-dimensional (3D) porous scaffolds regulate the fate of mesenchymal stem cells (MSCs) in vitro in combination. First, on poly(ε-caprolactone) (PCL) films, the hydrolytic treatment was found to stimulate the adhesion, spreading and proliferation of human MSCs (hMSCs) in comparison with pristine films, while the aminolysis showed mixed effects. Then, 3D porous PCL scaffolds with varying pore sizes (100-200μm, 200-300μm and 300-450μm) were fabricated and subjected to either hydrolysis or aminolysis. It was found that a pore size of 200-300μm with hydrolysis in 3D scaffolds was the most favorable condition for growth of hMSCs. Importantly, while a pore size of 200-300μm with hydrolysis for 1h supported the best osteogenic differentiation of hMSCs, the chondrogenic differentiation was greatest in scaffolds with a pore size of 300-450μm and treated with aminolysis for 1h. Taken together, these results suggest that surface chemistry and pore size of 3D porous scaffolds may potentially have a synergistic impact on the behaviors of MSCs.

Enhancement of human mesenchymal stem cell differentiation by combination treatment with 5-azacytidine and trichostatin A

OBJECTIVE

To enhance the differentiation of mesenchymal stem cells (MSCs) and their epigenetic status by modification using hypomethylating agents (HMAs) and histone deacetylase inhibitors (HDACs).

RESULTS

Treatment with 5-azacytidine or 5-azacytidine plus trichostatin A (TSA) increased expression of Runx-2, BDNF and Sox-9 compared with the control or TSA groups. Maximal increases of 4.1-, 4.5-, and 8.3-fold in Runx-2, BDNF, and Sox-9 transcript levels, respectively, were observed in the 5-azacytidine plus TSA group. Similar to the expression pattern of key regulatory molecules, differentiation to each lineage was also enhanced considerably in the 5-azacytidine or in the 5-azacytidine plus TSA groups. Quantitative analyses at the protein level showed 8.9-, 26.8-, 27.9-, and 28.5-fold upregulation of osterix, MAP-2, nestin, and type II collagen), respectively.

CONCLUSION

HMAs and HDACs enhanced in vitro differentiation of MSCs, which was maximized when the two drugs were combined, with HMA having the dominant effect.

Surface Chemical Gradient Affects the Differentiation of Human Adipose-Derived Stem Cells via ERK1/2 Signaling Pathway

To understand the role of surface chemistry on cell behavior and the associated molecular mechanisms, we developed and utilized a surface chemical gradient of amine functional groups by carefully adjusting the gas composition of 1,7-octadiene (OD) and allylamine (AA) of the plasma phase above a moving substrate. The chemical gradient surface used in the present work shows an increasing N/C ratio and wettability from the OD side toward the AA side with no change in surface topography. Under standard culture conditions (with serum), human adipose-derived stem cells (hASCs) adhesion and spreading area increased toward the AA side of the gradient. However, there were no differences in cell behavior in the absence of serum. These results, supported by the trends in proteins adsorption on the gradient surface, demonstrated that surface chemistry affects the response of hASCs through cell-adhesive serum proteins, rather than interacting directly with the cells. The expression of p-ERK and the osteogenic differentiation increased toward the AA side of the gradient, while adipogenic differentiation decreased in the same direction; however, when the activation of ERK1/2 was blocked by PD98059, the levels of osteogenic or adipogenic differentiation on different regions of the chemical gradient were the same. This indicates that ERK1/2 may be an important downstream signaling pathway of surface chemistry directed stem cell fate.

Microenvironmental factors involved in human amnion mesenchymal stem cells fate decisions

Human amnion mesenchymal stem cells (HAMCs) show great differentiation and proliferation potential and also other remarkable features that could serve as an outstanding alternative source of stem cells in regenerative medicine. Recent reports have demonstrated various kinds of effective artificial niche that mimic the microenvironment of different types of stem cell to maintain and control their fate and function. The components of the stem cell microenvironment consist mainly of soluble and insoluble factors responsible for regulating stem cell differentiation and self-renewal. Extensive studies have been made on regulating HAMCs differentiation into specific phenotypes; however, the understanding of relevant factors in directing stem cell fate decisions in HAMCs remain underexplored. In this review, we have therefore identified soluble and insoluble factors, including mechanical stimuli and cues from the other supporting cells that are involved in directing HAMCs fate decisions. In order to strengthen the significance of understanding on the relevant factors involved in stem cell fate decisions, recent technologies developed to specifically mimic the microenvironments of specific cell lineages are also reviewed. Copyright © 2015 John Wiley & Sons, Ltd.

Surface topography enhances differentiation of mesenchymal stem cells towards osteogenic and adipogenic lineages

Surface topography impacts on cell growth and differentiation, but it is not trivial to generate defined surface structures and to assess the relevance of specific topographic parameters. In this study, we have systematically compared in vitro differentiation of mesenchymal stem cells (MSCs) on a variety of groove/ridge structures. Micro- and nano-patterns were generated in polyimide using reactive ion etching or multi beam laser interference, respectively. These structures affected cell spreading and orientation of human MSCs, which was also reflected in focal adhesions morphology and size. Time-lapse demonstrated directed migration parallel to the nano-patterns. Overall, surface patterns clearly enhanced differentiation of MSCs towards specific lineages: 15 μm ridges increased adipogenic differentiation whereas 2 μm ridges enhanced osteogenic differentiation. Notably, nano-patterns with a periodicity of 650 nm increased differentiation towards both osteogenic and adipogenic lineages. However, in absence of differentiation media surface structures did neither induce differentiation, nor lineage-specific gene expression changes. Furthermore, nanostructures did not affect the YAP/TAZ complex, which is activated by substrate stiffness. Our results provide further insight into how structuring of tailored biomaterials and implant interfaces - e.g. by multi beam laser interference in sub-micrometer scale - do not induce differentiation of MSCs per se, but support their directed differentiation.

Mesenchymal stromal cells for sphincter regeneration

Stress urinary incontinence (SUI), defined as the involuntary loss of considerable amounts of urine during increased abdominal pressure (exertion, effort, sneezing, coughing, etc.), is a severe problem to the individuals affected and a significant medical, social and economic challenge. SUI is associated with pelvic floor debility, absence of detrusor contraction, or a loss of control over the sphincter muscle apparatus. The pathology includes an increasing loss of muscle cells, replacement of muscular tissue with fibrous tissue, and general aging associated processes of the sphincter complex. When current therapies fail to cure or improve SUI, application of regeneration-competent cells may be an alternative therapeutic option. Here we discuss different aspects of the biology of mesenchymal stromal cells, which are relevant to their clinical applications and for regenerating the sphincter complex. However, there are reports in favor of and against cell-based therapies. We therefore summarize the potential and the risks of cell-based therapies for the treatment of SUI.

A review of the effects of the cell environment physicochemical nanoarchitecture on stem cell commitment

Physicochemical features of a cell nanoenvironment exert important influence on stem cell behavior and include the influence of matrix elasticity and topography on differentiation processes. The presence of growth factors such as TGF-β and BMPs on these matrices provides chemical cues and thus plays vital role in directing eventual stem cell fate. Engineering of functional biomimetic scaffolds that present programmed spatio-temporal physical and chemical signals to stem cells holds great promise in stem cell therapy. Progress in this field requires tacit understanding of the mechanistic aspects of cell-environment nanointeractions, so that they can be manipulated and exploited for the design of sophisticated next generation biomaterials. In this review, we report and discuss the evolution of these processes and pathways in the context of matrix adhesion as they might relate to stemness and stem cell differentiation. Super-resolution microscopy and single-molecule methods for in vitro nano-manipulation are helping to identify and characterize the molecules and mechanics of structural transitions within stem cells and matrices. All these advances facilitate research toward understanding of stem cell niche and consequently to developing new class of biomaterials helping the "used biomaterials" for applications in tissue engineering and regenerative medicine.