Mechanisms of lamellar collagen formation in connective tissues

Ultrastructural features of tumor-associated mast cells in parasympathetic paragangliomas (chemodectomas) of the neck

The mechanisms of the pathogenesis of neck paraganglioma (PGL) and the possible role of mast cells (MCs) in its development and metastasis are still poorly understood. We analyzed MCs' morphologic characterization, activation, and the properties of their cytoplasmic/released granules in PGLs, using light and transmission electron microscopy. Paragangliomas showed a large tumor-associated MC population both in the connective tissue layers of the tumor and between the tumor cells. Notably, MCs were presented by a high expression of specific proteases, size variation, polymorphism, and variable ultrastructural phenotype of granules. A massive number of granules were released surrounding the degranulated MCs while the integrity of MC membrane was maintained. Granules were electron-dense with or without a membrane, ranging from 0.2 to 0.8 μm in diameter. MC plasmalemma was not found at the site of MC-collagen fibrils contact, whereas the secretome and fibrils were directly contacted. We observed direct and mediator-based interactions between MCs and paraganglioma cells. The latter preserved their membrane integrity when MC granules were not in proximity. The effects of the MC secretome on the paraganglioma microenvironment demonstrated its pathogenetic role in tumor progression and allow its application to new diagnostic criteria and the development of protocols for personalized therapy. RESEARCH HIGHLIGHTS: Ultrastructural analysis reveals novel regulatory effects of mast cells via diverse secretory pathways on the pathogenesis of parasympathetic paraganglioma, including fibrous extracellular matrix remodeling and mediator-based interactions between MCs and cells of the tumor microenvironment.

Acidic Osteoid Templates the Plywood Structure of Bone Tissue

Bone is created by osteoblasts that secrete osteoid after which an ordered texture emerges, followed by mineralization. Plywood geometries are a hallmark of many trabecular and cortical bones, yet the origin of this texturing in vivo has never been shown. Nevertheless, extensive in vitro work revealed how plywood textures of fibrils can emerge from acidic molecular cholesteric collagen mesophases. This study demonstrates in sheep, which is the preferred model for skeletal orthopaedic research, that the deeper non-fibrillar osteoid is organized in a liquid-crystal cholesteric geometry. This basophilic domain, rich in acidic glycosaminoglycans, exhibits low pH which presumably fosters mesoscale collagen molecule ordering in vivo. The results suggest that the collagen fibril motif of twisted plywood matures slowly through self-assembly thermodynamically driven processes as proposed by the Bouligand theory of biological analogues of liquid crystals. Understanding the steps of collagen patterning in osteoid-maturation processes may shed new light on bone pathologies that emerge from collagen physico-chemical maturation imbalances.

Tendon Repair and Regeneration Using Bioinspired Fibrillation Engineering That Mimicked the Structure and Mechanics of Natural Tissue

Replicating the controlled nanofibrillar architecture of collagenous tissue represents a promising approach in the design of tendon replacements that have tissue-mimicking biomechanics─outstanding mechanical strength and toughness, defect tolerance, and fatigue and fracture resistance. Guided by this principle, a fibrous artificial tendon (FAT) was constructed in the present study using an engineering strategy inspired by the fibrillation of a naturally spun silk protein. This bioinspired FAT featured a highly ordered molecular and nanofibrillar architecture similar to that of soft collagenous tissue, which exhibited the mechanical and fracture characteristics of tendons. Such similarities provided the motivation to investigate FAT for applications in Achilles tendon defect repair. In vitro cellular morphology and expression of tendon-related genes in cell culture and in vivo modeling of tendon injury clearly revealed that the highly oriented nanofibrils in the FAT substantially promoted the expression of tendon-related genes combined with the Achilles tendon structure and function. These results provide confidence about the potential clinical applications of the FAT.

Targeting Endogenous Reactive Oxygen Species Removal and Regulating Regenerative Microenvironment at Annulus Fibrosus Defects Promote Tissue Repair

The excessive reactive oxygen species (ROS) level, inflammation, and weak tissue regeneration ability after annulus fibrosus (AF) injury constitute an unfavorable microenvironment for AF repair. AF integrity is crucial for preventing disc herniation after discectomy; however, there is no effective way to repair the AF. Herein, a composite hydrogel integrating properties of antioxidant, anti-inflammation, and recruitment of AF cells is developed through adding mesoporous silica nanoparticles modified by ceria and transforming growth factor β3 (TGF-β3) to the hydrogels. The nanoparticle loaded gelatin methacrylate/hyaluronic acid methacrylate composite hydrogels eliminate ROS and induce anti-inflammatory M2 type macrophage polarization. The released TGF-β3 not only plays a role in recruiting AF cells but is also responsible for promoting extracellular matrix secretion. The composite hydrogels can be solidified in situ in the defect area to effectively repair AF in rats. The strategies targeting endogenous ROS removal and improving the regenerative microenvironment by the nanoparticle-loaded composite hydrogels have potential applications in AF repair and intervertebral disc herniation prevention.

Electrospun hydroxyapatite loaded L-polylactic acid aligned nanofibrous membrane patch for rotator cuff repair

Rotator cuff repair remains a challenge clinically due to the high retear rate after surgical intervention. There is a significant need to develop functional biomaterials facilitating tendon-to-bone integration. In this study, hydroxyapatite (HA) incorporated polylactic acid (PLLA) aligned nanofibrous membranes were fabricated by electrospinning as a low-cost sustainable rotator cuff patch. The morphology, physical, mechanical and in vitro cell assays of the nanofibrous membranes were characterized. The results showed that the nanofibrous membrane maintained a rough surface and weakened hydrophobicity. It has excellent cytocompatibility, and the cells were oriented along the direction of fiber arrangement. What's more, the PLLA-HA nanofibrous membrane could increase the alkaline phosphatase (ALP) expression in rat bone marrow mesenchymal stem cells (BMSCs), indicating that the electrospinning PLLA-HA nanofibrous membrane can better induce the bone formation of rat BMSCs cells. When the mass ratio of PLLA to HA exceeds 3: 1, with the increase of the HA content, the patch showed rising induction ability. The results suggested that electrospinning PLLA-HA nanofibrous membranes are an ideal patch for promoting tendon-bone healing and reducing the secondary tear rate. Furthermore, the use of biodegradable polymers and low-cost preparation methods presented the possibility for commercial production of these nanofibrous membranes.

Liquid Crystal Modified Polylactic Acid Improves Cytocompatibility and M2 Polarization of Macrophages to Promote Osteogenesis

Liquid crystalline phases (LC phases) are widely present in an organism. The well-aligned domain and liquidity of the LC phases are necessary for various biological functions. How to stabilize the floating LC phases and maintain their superior biology is still under study. In addition, it is unclear whether the exogenous LC state can regulate the immune process and improve osteogenesis. In this work, a series of composite films (PLLA/LC) were prepared using cholesteryl oleyl carbonate (COC), cholesteryl pelargonate (CP), and polylactic acid (PLLA) via a controlled facile one-pot approach. The results showed that the thermo-responsive PLLA/LC films exhibited stable LC phases at human body temperature and the cytocompatibility of the composites was improved significantly after modification by the LC. In addition, the M2 polarization of macrophages (RAW264.7) was enhanced in PLLA/LC films, and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was improved as co-cultured with macrophages. The in vivo bone regeneration of the materials was verified by calvarial repair, in which the amount of new bone in the PLLA-30% LC group was greater than that in the PLLA group. This work revealed that the liquid crystal-modified PLLA could promote osteogenesis through immunomodulation.

Engineering functional skin constructs: A quantitative comparison of three-dimensional bioprinting with traditional methods

Tissue engineering has been successful in reproducing human skin equivalents while incorporating new approaches such as three-dimensional (3D) bioprinting. The latter method offers a plethora of advantages including increased production scale, ability to incorporate multiple cell types and printing on demand. However, the quality of printed skin equivalents compared to those developed manually has never been assessed. To leverage the benefits of this method, it is imperative that 3D-printed skin should be structurally and functionally similar to real human skin. Here, we developed four bilayered human skin epidermal-dermal equivalents: non-printed dermis and epidermis (NN), printed dermis and epidermis (PP), printed epidermis and non-printed dermis (PN), and non-printed epidermis and printed dermis (NP). The effects of printing induced shear stress [0.025 kPa (epidermis); 0.049 kPa (dermis)] were characterized both at the cellular and at the tissue level. At cellular level, no statistically significant differences in keratinocyte colony-forming efficiency (CFE) (p = 0.1641) were observed. In the case of fibroblasts, no significant differences in the cell alignment index (p < 0.1717) and their ability to contract collagen gel (p = 0.851) were detected. At the tissue levels, all the four skin equivalents were characterized using histological and immunohistochemical analysis with no significant differences found in either epidermal basal cell count, thickness of viable epidermis, and relative intensity of filaggrin and claudin-1. Our results demonstrated that 3D printing can achieve the same high-quality skin constructs as have been developed traditionally, thus opening new avenues for numerous high-throughput industrial and clinical applications.

Highly interconnected inverse opal extracellular matrix scaffolds enhance stem cell therapy in limb ischemia

The therapeutic effectiveness of cell transplantation in treatment of diseases and injuries is often limited by low cell retention, survivability, and engraftment. Extracellular matrix (ECM)-derived scaffolds are capable of controlling cell responses, thereby offering potential solutions to current challenges associated with cell therapy. However, it remains a technical challenge to produce ECM scaffolds with highly interconnected porous structure specifically required for cell transplantation. Here, we developed inverse opal porous extracellular matrix (ioECM) scaffolds through subcutaneous implantation of sacrificial templates assembled from polymer microspheres, followed by removal of the microsphere template and cellular content. Such highly interconnected porous ioECM scaffolds supported the anchorage, survival, viability, anti-apoptotic and paracrine activities of rat bone marrow mesenchymal stem cells (BMSCs), which further promoted endothelial cell migration and tube formation and viability. Upon transplantation into nude mouse critical limb ischemic model, ioECM promoted the engraftment of laden BMSCs, facilitated interconnected vascular network formation with accelerated recovery of blood perfusion and inhibited muscle atrophy and fibrosis. Our study demonstrates a unique strategy to engineer highly porous yet well-interconnected ECM scaffolds specifically for cell transplantation with marked improvement of survivability and vascularization, which offers an essential step toward the success of cell therapy and regenerative medicine. STATEMENT OF SIGNIFICANCE: Cell-based therapy has a good developing foreground applied in a variety of tissue regeneration. Extracellular matrix (ECM) scaffolds is an optimal choice for cell delivery duo to its superior biocompatibility and favorable immune responses. However, the current ECM scaffolds lacking of the controllable pore structure restrict the cell delivery efficiency and therapeutic outcome. Here, we fabricated highly interconnected inverse opal extracellular matrix (ioECM) scaffolds, which can enhance the effect of stem cell therapy in limb ischemic model by improving the survival, viability, and paracrine activities of stem cells. Our study provides reference value for the design and fabrication of ECM based biomaterials for cell transplantation.

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

Morphofunctional characteristics of cutaneous connective tissue scars in women with past history of childbirth after cesarian delivery

The inevitable outcome of skin injuries caused by a variety of external factors is the formation of a connective tissue scar. A scar can deform when exposed to stretching, pressure or repeat surgeries and undergo structural changes leading to its dehiscence. Scar dehiscence is a common problem seen in women with a past history of cesarean delivery. There have been comprehensive studies of uterine scars formed after the C-section, but the morphology of cutaneous C-section scars has not yet been investigated. The aim of this study was to look into the morphology of connective tissue scars in multiparas with a past history of cesarean delivery. Specimens of cutaneous scars were collected from 30 women after the C-section. Within one age group, fiber thickness was directly proportional to the number of previous deliveries. Comparison of different age groups with the same number of previous deliveries revealed the thinning of collagen fibers and the increased density of type III collagen fibers. The most pronounced changes were observed in women with a history of 3 or more deliveries. We hypothesize that a connective tissue scar undergoes structural transformation, becomes thinner, and its fibers dissociate due to repeated skin stretching, which might indirectly suggest the dehiscence of the postoperative scar.

Alteration of structural and mechanical properties of the temporomandibular joint disc following elastase digestion

The temporomandibular joint disc is a fibrocartilaginous structure, composed of collagen fibers, elastin fibers, and proteoglycans. Despite the crucial role of elastin fibers in load‐bearing properties of connective tissues, its contribution in temporomandibular joint disc biomechanics has been disregarded. This study attempts to characterize the structural–functional contribution of elastin in the temporomandibular joint disc. Using elastase, we selectively perturbed the elastin fiber network in porcine temporomandibular joint discs and investigated the structural, compositional, and mechanical regional changes through: (a) analysis of collagen and elastin fibers by immunolabeling and transmission electron microscopy; (b) quantitative analysis of collagen tortuosity, cell shape, and disc volume; (c) biochemical quantification of collagen, glycosaminoglycan and elastin content; and (d) cyclic compression test. Following elastase treatment, microscopic examination revealed fragmentation of elastin fibers across the temporomandibular joint disc, with a more pronounced effect in the intermediate regions. Also, biochemical analyses of the intermediate regions showed significant depletion of elastin (50%), and substantial decrease in collagen (20%) and glycosaminoglycan (49%) content, likely due to non‐specific activity of elastase. Degradation of elastin fibers affected the homeostatic configuration of the disc, reflected in its significant volume enlargement accompanied by remarkable reduction of collagen tortuosity and cell elongation. Mechanically, elastase treatment nearly doubled the maximal energy dissipation across the intermediate regions while the instantaneous modulus was not significantly affected. We conclude that elastin fibers contribute to the restoration and maintenance of the disc resting shape and actively interact with collagen fibers to provide mechanical resilience to the temporomandibular joint disc.

Substrate Topography Regulates Differentiation of Annulus Fibrosus-Derived Stem Cells via CAV1-YAP-Mediated Mechanotransduction

Regeneration of annulus fibrosus (AF) through tissue engineering techniques shows promise as a treatment for patients with degenerative disc disease (DDD). Yet, it remains challenging because of the intrinsic heterogeneity of AF tissue and shortage of in-depth knowledge of its structure-function correlation. In the current study, we fabricated fibrous poly(ether carbonate urethane)urea (PECUU) scaffolds with various fiber sizes to mimic the microstructural feature of native AF and aimed to regulate the differentiation of AF-derived stem cells (AFSCs) by controlling the topographical cues of the scaffold. We found that the morphology of AFSCs varied significantly on scaffolds with various fiber sizes. Meanwhile, the expression of the phenotypic marker genes of outer AF was up-regulated on scaffolds with large fibers. Meanwhile, enhanced expression of the phenotypic marker genes of inner AF was seen on scaffolds with small fibers. Such topography-dependent gene expression in AFSCs approximated the biochemical profile of AF tissue in various zones. Moreover, cell spreading and nucleus translocation of Yes-associated protein (YAP) were facilitated with increased fiber size. Formation and maturation of focal adhesions of AFSCs were also promoted. We also found that Caveolin-1 (CAV1) positively modulated the mechano-responses of YAP in response to substrate topography. In conclusion, depending on the activation of the CAV1-YAP mechanotransduction axis, tuning the fiber size of scaffolds can effectively induce changes in cell shape, adhesions, and extracellular matrix expression. This work may therefore provide new insights in the design of novel materials toward AF tissue regeneration.

Mast cells and collagen fibrillogenesis

This article presents 20 combinations of histochemical stainings for the determination of mast cell co-localization with the fibrous component of the connective tissue in the fibrillogenesis course. Best results were obtained using metachromatic detection of mast cells in combination with silver or picro-fuchsin impregnation, staining with brilliant green using van Gieson staining, and a combination of aniline blue staining with neutral red. Proposed variants of histochemical protocols open up new opportunities to analyze the participation of mast cells in extracellular matrix remodeling of the tissue microenvironment in the course of adaptive and pathological processes. Results obtained expand the current theoretical views of the process of fibrillogenesis in the extracellular matrix. They also shed new light on the participation of mast cell secretion components in the molecular mechanisms of fiber formation.

Cell-independent matrix configuration in early corneal development

Mechanisms controlling the spatial configuration of the remarkably ordered collagen-rich extracellular matrix of the transparent cornea remain incompletely understood. We previously described the assembly of the emerging corneal matrix in the mid and late stages of embryogenesis and concluded that collagen fibril organisation was driven by cell-directed mechanisms. Here, the early stages of corneal morphogenesis were examined by serial block face scanning electron microscopy of embryonic chick corneas starting at embryonic day three (E3), followed by a Fourier transform analysis of three-dimensional datasets and theoretical considerations of factors that influence matrix formation. Eyes developing normally and eyes that had the lens surgically removed at E3 were studied. Uniformly thin collagen fibrils are deposited by surface ectoderm-derived corneal epithelium in the primary stroma of the developing chick cornea and form an acellular matrix with a striking micro-lamellar orthogonal arrangement. Fourier transform analysis supported this observation and indicated that adjacent micro-lamellae display a clockwise rotation of fibril orientation, depth-wise below the epithelium. We present a model which attempts to explain how, in the absence of cells in the primary stroma, collagen organisation might be influenced by cell-independent, intrinsic mechanisms, such as fibril axial charge derived from associated proteoglycans. On a supra-lamellar scale, fine cords of non-collagenous filamentous matrix were detected over large tissue volumes. These extend into the developing cornea from the epithelial basal lamina and appear to associate with the neural crest cells that migrate inwardly to form, first the corneal endothelium and then keratocytes which synthesise the mature, secondary corneal stroma. In a small number of experimental specimens, matrix cords were present even when periocular neural crest cell migration and corneal morphogenesis had been perturbed following removal of the lens at E3.

•

Highly-ordered connective tissue appears early in development of the avian cornea.

•

Cell-independent mechanisms may contribute to the organisation of collagen fibrils into an orthogonal array.

•

Matrix cords from epithelium into stroma contact invading neural crest cells.

Substrate stiffness- and topography-dependent differentiation of annulus fibrosus-derived stem cells is regulated by Yes-associated protein

Annulus fibrosus (AF) tissue engineering has attracted increasing attention as a promising therapy for degenerative disc disease (DDD). However, regeneration of AF still faces many challenges due to the tremendous complexity of this tissue and lack of in-depth understanding of the structure-function relationship at cellular level within AF is highly required. In light of the fact that AF is composed of various types of cells and has gradient mechanical, topographical and biochemical features along the radial direction. In this study, we aimed to achieve directed differentiation of AF-derived stem cells (AFSCs) by mimicking the mechanical and topographical features of native AF tissue. AFSCs were cultured on four types of electrospun poly(ether carbonate urethane)urea (PECUU) scaffolds with various stiffness and fiber size (soft, small size; stiff, small size; soft, large size and stiff, large size). The results show that with constant fiber size, the expression level of the outer AF (oAF) phenotypic marker genes in AFSCs increased with the scaffold stiffness, while that of inner AF (iAF) phenotypic marker genes showed an opposite trend. When scaffold stiffness was fixed, the expression of oAF phenotypic marker genes in AFSCs increased with fiber size. While the expression of iAF phenotypic marker genes decreased. Such substrate stiffness- and topography-dependent changes of AFSCs was in accordance with the genetic and biochemical distribution of AF tissue from the inner to outer regions. Further, we found that the Yes-associated protein (YAP) was translocated to the nucleus in AFSCs cultured with increasing stiffness and fiber size of scaffolds, yet it remained mostly phosphorylated and cytosolic in cells on soft scaffolds with small fiber size. Inhibition of YAP down-regulated the expression of tendon/ligament-related genes, whereas expression of the cartilage-related genes was upregulated. The results illustrate that matrix stiffness is a potent regulator of AFSC differentiation. Moreover, we reveal that fiber size of scaffolds induced changes in cell adhesions and determined cell shape, spreading area, and extracellular matrix expression. In all, both mechanical property and topography features of scaffolds regulate AFSC differentiation, possibly through a YAP-dependent mechanotransduction mechanism. STATEMENT OF SIGNIFICANCE: Physical cues such as mechanical properties, topographical and geometrical features were shown to profoundly impact the growth and differentiation of cultured stem cells. Previously, we have found that the differentiation of annulus fibrosus-derived stem cells (AFSCs) could be regulated by the stiffness of scaffold. In this study, we fabricated four types of poly(ether carbonate urethane)urea (PECUU) scaffolds with controlled stiffness and fiber size to explore the potential of induced differentiation of AFSCs. We found that AFSCs are able to present different gene expression patterns simply as a result of the stiffness and fiber size of scaffold material. This work has, for the first time, demonstrated that larger-sized and higher-stiffness substrates increase the amount of vinculin assembly and activate YAP signaling in pre-differentiated AFSCs. The present study affords an in-depth comprehension of materiobiology, and be helpful for explain the mechanism of YAP mechanosensing in AF in response to biophysical effects of materials.

Apatite minerals derived from collagen phosphorylation modification induce the hierarchical intrafibrillar mineralization of collagen fibers

Collagen is the critical organic component of bone matrix, which is the template for bone biomineralization. Phosphorylation modification of collagen plays an important role in the process of biomineralization in vivo, but its mechanism on in vitro biomimetic mineralization of bone matrix remains unclear at the molecular level. Sodium tripolyphosphate is used to phosphorylate collagen in this study and new phosphate groups appear on collagen fibrils after phosphorylation modification. The chelating amount of calcium is improved linearly with increasing the phosphorylation degree of collagen fibrils, which demonstrates that the introduced phosphate groups serve as new nucleation sites and participate in the formation of apatite minerals inside the collagen fibers. Stabilized nanosized amorphous calcium phosphate by polyacrylic acid can also permeate into collagen fibers and further transform into another layer of hydroxyapatite minerals. Both layers of apatite minerals eventually induce the formation of hierarchical intrafibrillar mineralization structure within the phosphorylated collagen fibers. The present research enriches the previous biomineralization mechanism of bone matrix, provides a facile strategy for biomimetic mineralization of collagen, and offers the basis for future investigation of the advanced bone substitute materials.

Evaluation of an elastic decellularized tendon-derived scaffold for the vascular tissue engineering application

Due to the limited success rate of currently available vascular replacements, tissue engineering has received tremendous attention in recent years. A main challenge in the field of regenerative medicine is creating a mechanically functional tissue with a well-organized extracellular matrix, particularly of collagen and elastin. In this study, the native collagen scaffold derived from decellularized tendon sections, as a scaffold having the potential to be used for vascular tissue engineering applications, was studied. We showed that the elasticity of the scaffolds was improved when crosslinked with the bovine elastin. The effect of different concentrations of elastin on mechanical properties of the collagen scaffolds was evaluated of which 15% elastin concentration was selected for further analysis based on the results. Addition of 15% elastin to collagen scaffolds significantly decreased Young's modulus and the tensile stress at the maximum load and increased the tensile strain at the maximum load of the constructs as compared to those of the collagen scaffolds or control samples. Moreover, tubular elastin modified collagen scaffolds showed significantly higher burst pressure compared to the control samples. Smooth muscle cells and endothelial cells cultured on the elastin modified collagen scaffolds showed high viability (>80%) after 1, 3, and 7 days. Furthermore, the cells showed a high tendency to align with the collagen fibers within the scaffold and produced their own extracellular matrix over time. In conclusion, the results show that the decellularized tendon sections have a great potential to be used as scaffolds for vascular tissue engineering applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1225-1234, 2019.

Elastic materials for tissue engineering applications: Natural, synthetic, and hybrid polymers

Elastin and collagen are the two main components of elastic tissues and provide the tissue with elasticity and mechanical strength, respectively. Whereas collagen is adequately produced in vitro, production of elastin in tissue-engineered constructs is often inadequate when engineering elastic tissues. Therefore, elasticity has to be artificially introduced into tissue-engineered scaffolds. The elasticity of scaffold materials can be attributed to either natural sources, when native elastin or recombinant techniques are used to provide natural polymers, or synthetic sources, when polymers are synthesized. While synthetic elastomers often lack the biocompatibility needed for tissue engineering applications, the production of natural materials in adequate amounts or with proper mechanical strength remains a challenge. However, combining natural and synthetic materials to create hybrid components could overcome these issues. This review explains the synthesis, mechanical properties, and structure of native elastin as well as the theories on how this extracellular matrix component provides elasticity in vivo. Furthermore, current methods, ranging from proteins and synthetic polymers to hybrid structures that are being investigated for providing elasticity to tissue engineering constructs, are comprehensively discussed.

STATEMENT OF SIGNIFICANCE

Tissue engineered scaffolds are being developed as treatment options for malfunctioning tissues throughout the body. It is essential that the scaffold is a close mimic of the native tissue with regards to both mechanical and biological functionalities. Therefore, the production of elastic scaffolds is of key importance to fabricate tissue engineered scaffolds of the elastic tissues such as heart valves and blood vessels. Combining naturally derived and synthetic materials to reach this goal proves to be an interesting area where a highly tunable material that unites mechanical and biological functionalities can be obtained.

Morphogenesis of aligned collagen fibers in the annulus fibrosus: Mammals versus avians

The mammalian intervertebral disc (IVD) consists of a gel-like, disordered nucleus pulposus (NP) surrounded by a highly ordered collagen structure, the annulus fibrosus (AF). While this concentric array of lamellae has been amply studied, its physical origin is poorly understood. The notochord is a rod-like organ located in the mid-line of the growing embryo and plays an essential role in IVD development. The aim of this study was to elucidate the effect of notochord development on the collagen fiber arrangement evolution in the AF. To that end, we studied IVD development in mouse embryos and compared these observations to those from chicken embryos, which do not form the typical laminar structure around the NP. In mouse, cross-aligned collagen arrangement of the AF forms from the sclerotome upon bulging of the notochord to become NP. By contrast, the notochord in the chicken embryo swells substantially without the physical restrictions of the future vertebrae and thus do not bulge. From these observations, we conclude that physical and geometrical constrictions are essential for the formation of the highly structured AF.

Liquid-crystalline nanoarchitectures for tissue engineering

Hierarchical orders are found throughout all levels of biosystems, from simple biopolymers, subcellular organelles, single cells, and macroscopic tissues to bulky organs. Especially, biological tissues and cells have long been known to exhibit liquid crystal (LC) orders or their structural analogues. Inspired by those native architectures, there has recently been increased interest in research for engineering nanobiomaterials by incorporating LC templates and scaffolds. In this review, we introduce and correlate diverse LC nanoarchitectures with their biological functionalities, in the context of tissue engineering applications. In particular, the tissue-mimicking LC materials with different LC phases and the regenerative potential of hard and soft tissues are summarized. In addition, the multifaceted aspects of LC architectures for developing tissue-engineered products are envisaged. Lastly, a perspective on the opportunities and challenges for applying LC nanoarchitectures in tissue engineering fields is discussed.

Biomimetic Scaffolds for Bone Tissue Engineering

The use of biomimetic scaffolds for bone tissue engineering has been studied for a long time. Biomimetic scaffolds can assist and accelerate bone regeneration that is similar to that of authentic tissue, which represents the environment of cells in a living organism. Currently, numerous biomaterials have been reported for use as a biomimetic scaffold. This review focuses on the design of biomimetic scaffolds, kinds of biomaterials and methods used to fabricate biomimetic scaffolds, growth factors used with biomimetic scaffold for bone regeneration, mobilization of biological agents into biomimetic scaffolds, and studies on (pre)clinical bone regeneration from biomimetic scaffolds. Then, future prospects for biomimetic scaffolds are discussed.

A Simple Modification Method to Obtain Anisotropic and Porous 3D Microfibrillar Scaffolds for Surgical and Biomedical Applications

In native tissues, cellular organization is predominantly anisotropic. Yet, it remains a challenge to engineer anisotropic scaffolds that promote anisotropic cellular organization at macroscopic length scales. To overcome this challenge, an innovative, cheap and easy method to align clinically approved non-woven surgical microfibrillar scaffolds is presented. The method involves a three-step process of coating, unidirectional stretching of scaffolds after heating them above glass transition temperature, and cooling back to room temperature. Briefly, a polymer coating is applied to a non-woven mesh that results in a partial welding of randomly oriented microfibers at their intersection points. The coated scaffold is then heated above the glass transition temperature of the coating and the scaffold polymer. Subsequently, the coated scaffold is stretched to produce aligned and three dimentional (3D) porous fibrillar scaffolds. In a proof of concept study, a polyglycolic acid (PGA) micro-fibrillar scaffold was coated with poly(4-hydroxybutirate) (P4HB) acid and subsequently aligned. Fibroblasts were cultured in vitro within the scaffold and results showed an increase in cellular alignment along the direction of the PGA fibers. This method can be scaled up easily for industrial production of polymeric meshes or directly applied to small pieces of scaffolds at the point of care.

Mechanical stiffness of TMJ condylar cartilage increases after artificial aging by ribose

OBJECTIVE

Aging is accompanied by a series of changes in mature tissues that influence their properties and functions. Collagen, as one of the main extracellular components of cartilage, becomes highly crosslinked during aging. In this study, the aim was to examine whether a correlation exists between collagen crosslinking induced by artificial aging and mechanical properties of the temporomandibular joint (TMJ) condyle. To evaluate this hypothesis, collagen crosslinks were induced using ribose incubation.

METHODS

Porcine TMJ condyles were incubated for 7 days with different concentrations of ribose. The compressive modulus and stiffness ratio (incubated versus control) was determined after loading. Glycosaminoglycan and collagen content, and the number of crosslinks were analyzed. Tissue structure was visualized by microscopy using different staining methods.

RESULTS

Concomitant with an increasing concentration of ribose, an increase of collagen crosslinks was found. The number of crosslinks increased almost 50 fold after incubation with the highest concentration of ribose. Simultaneously, the stiffness ratio of the samples showed a significant increase after incubation with the ribose. Pearson correlation analyses showed a significant positive correlation between the overall stiffness ratio and the crosslink level; the higher the number of crosslinks the higher the stiffness.

CONCLUSION

The present model, in which ribose was used to mimic certain aspects of age-related changes, can be employed as an in vitro model to study age-related mechanical changes in the TMJ condyle.

Stabilization of Collagen Fibrils by Gelatin Addition: A Study of Collagen/Gelatin Dense Phases

Collagen and its denatured form, gelatin, are biopolymers of fundamental interest in numerous fields ranging from living tissues to biomaterials, food, and cosmetics. This study aims at characterizing mixtures of those biopolymers at high concentrations (up to 100 mg·mL^-1) at which collagen has mesogenic properties. We use a structural approach combining polarization-resolved multiphoton microscopy, polarized light microscopy, magnetic resonance imaging, and transmission electron microscopy to analyze gelatin and collagen/gelatin dense phases in their sol and gel states from the macroscopic to the microscopic scale. We first report the formation of a lyotropic crystal phase of gelatin A and show that gelatin must structure itself in particles to become mesogenic. We demonstrate that mixtures of collagen and gelatin phase segregate, preserving the setting of the pure collagen mesophase at a gelatin ratio of up to 20% and generating a biphasic fractal sample at all tested ratios. Moreover, differential scanning calorimetric analysis shows that each protein separates into two populations. Both populations of gelatins are stabilized by the presence of collagen, whereas only one population of collagen molecules is stabilized by the presence of gelatin, most probably those at the interface of the fibrillated microdomains and of the gelatin phase. Although further studies are needed to fully understand the involved mechanism, these new data should have a direct impact on the bioengineering of those two biopolymers.

Shear-mediated orientational mineralization of bone apatite on collagen fibrils

Intrafibrillar mineralization of collagen under a 1.5 Pa FSS environment versus the serious extrafibrillar mineralization of collagen under no FSS.