Non-eluting, surface-bound enzymes disrupt surface attachment of bacteria by continuous biofilm polysaccharide degradation

Complete photodynamic inactivation of Pseudomonas aeruginosa biofilm with use of potassium iodide and its comparison with enzymatic pretreatment

Pseudomonas aeruginosa, a gram-negative bacterium, accounts for 7% of all hospital-acquired infections. Despite advances in medicine and antibiotic therapy, P. aeruginosa infection still results in high mortality rates of up to 62% in certain patient groups. This bacteria is also known to form biofilms, that are 10 to 1000 times more resistant to antibiotics compared to their free-floating counterparts. Photodynamic Inactivation (PDI) has been proved to be an effective antimicrobial technique for microbial control. This method involves the incubation of the pathogen with a photosensitizer (PS), then, a light at appropriated wavelength is applied, leading to the production of reactive oxygen species that are toxic to the microbial cells. Studies have focused on strategies to enhance the PDI efficacy, such as a pre-treatment with enzymes to degrade the biofilm matrix and/or an addition of inorganic salts to the PS. The aim of the present study is to evaluate the effectiveness of PDI against P. aeruginosa biofilm in association with the application of the enzymes prior to PDI (enzymatic pre-treatment) or the addition of potassium iodide (KI) to the photosensitizer solution, to increase the inactivation effectiveness of the treatment. First, a range of enzymes and PSs were tested, and the best protocols for combined treatments were selected. The results showed that the use of enzymes as a pre-treatment was effective to reduce the total biomass, however, when associated with PDI, mild bacterial reductions were obtained. Then, the use of KI in association with the PS was evaluated and the results showed that, PDI mediated by methylene blue (MB) in the presence of KI was able to completely eradicate the biofilm. However, when the PDI was performed with curcumin and KI, no additive reduction was observed. In conclusion, out of all strategies evaluated in the present study, the most promising strategy to improve PDI against P. aeruginosa biofilm was the use of KI in association with MB, resulting in eradication with 108 log bacterial inactivation.

Medical Device-Associated Biofilm Infections and Multidrug-Resistant Pathogens

Medical devices such as venous catheters (VCs) and urinary catheters (UCs) are widely used in the hospital setting. However, the implantation of these devices is often accompanied by complications. About 60 to 70% of nosocomial infections (NIs) are linked to biofilms. The main complication is the ability of microorganisms to adhere to surfaces and form biofilms which protect them and help them to persist in the host. Indeed, by crossing the skin barrier, the insertion of VC inevitably allows skin flora or accidental environmental contaminants to access the underlying tissues and cause fatal complications like bloodstream infections (BSIs). In fact, 80,000 central venous catheters-BSIs (CVC-BSIs)-mainly occur in intensive care units (ICUs) with a death rate of 12 to 25%. Similarly, catheter-associated urinary tract infections (CA-UTIs) are the most commonlyhospital-acquired infections (HAIs) worldwide.These infections represent up to 40% of NIs.In this review, we present a summary of biofilm formation steps. We provide an overview of two main and important infections in clinical settings linked to medical devices, namely the catheter-asociated bloodstream infections (CA-BSIs) and catheter-associated urinary tract infections (CA-UTIs), and highlight also the most multidrug resistant bacteria implicated in these infections. Furthermore, we draw attention toseveral useful prevention strategies, and advanced antimicrobial and antifouling approaches developed to reduce bacterial colonization on catheter surfaces and the incidence of the catheter-related infections.

Chemical and Structural Engineering of Gelatin-Based Delivery Systems for Therapeutic Applications: A Review

As a biodegradable and biocompatible protein derived from collagen, gelatin has been extensively exploited as a fundamental component of biological scaffolds and drug delivery systems for precise medicine. The easily engineered gelatin holds great promise in formulating various delivery systems to protect and enhance the efficacy of drugs for improving the safety and effectiveness of numerous pharmaceuticals. The remarkable biocompatibility and adjustable mechanical properties of gelatin permit the construction of active 3D scaffolds to accelerate the regeneration of injured tissues and organs. In this Review, we delve into diverse strategies for fabricating and functionalizing gelatin-based structures, which are applicable to gene and drug delivery as well as tissue engineering. We emphasized the advantages of various gelatin derivatives, including methacryloyl gelatin, polyethylene glycol-modified gelatin, thiolated gelatin, and alendronate-modified gelatin. These derivatives exhibit excellent physicochemical and biological properties, allowing the fabrication of tailor-made structures for biomedical applications. Additionally, we explored the latest developments in the modulation of their physicochemical properties by combining additive materials and manufacturing platforms, outlining the design of multifunctional gelatin-based micro-, nano-, and macrostructures. While discussing the current limitations, we also addressed the challenges that need to be overcome for clinical translation, including high manufacturing costs, limited application scenarios, and potential immunogenicity. This Review provides insight into how the structural and chemical engineering of gelatin can be leveraged to pave the way for significant advancements in biomedical applications and the improvement of patient outcomes.

Exploring the effect of Lactiplantibacillus plantarum Lac 9-3 with high adhesion on refrigerated shrimp: Adhesion modeling and biopreservation evaluation

Lactic acid bacteria (LAB) have recently become ideal candidates for developing food biopreservatives. Adhesion is critical for LAB to perform biocontrol functions in food processing and preservation. In this study, we innovatively proposed an effective adhesion evaluation model related to the surface properties of LAB to excavate a LAB strain with high adhesion on the surface of shrimp. Then, the biocontrol potential regarding the quality of refrigerated shrimp was explored, especially for protein quality. The screening of highly adherent LAB was performed using 54 LAB strains tolerant to the low temperature (4 °C) and present antimicrobial activity. Based on surface hydrophobicity, autoaggregation, and biofilm formation, a new method for predicting LAB adhesion was established by stepwise multiple linear regression. The most relevant relationship between adhesion and biofilm formation was derived from the model. Lactiplantibacillus plantarum Lac 9-3 stood out for the strongest adhesion on the shrimp surface and the highest antimicrobial activity. The preservation results showed that Lac 9-3 significantly (p < 0.05) retarded the accumulation of total volatile basic nitrogen (TVB-N) and the growth of spoilage bacteria. The damage to the texture properties of shrimp was inhibited. Meanwhile, the degradation of myofibrillar protein was alleviated, including a significant delay (p < 0.05) in sulfhydryl (SH) group reduction, surface hydrophobicity increases, and protein conformation changes. This research optimized the evaluation of the bacteria adhesion potential, providing a new idea for developing biocontrol strategies to extend the commercial life of aquatic products.

Combination of Enzymes with Materials to Give Them Antimicrobial Features: Modern Trends and Perspectives

Multidrug-resistant bacteria form serious problems in many areas, including medicine and the food industry. At the same time, great interest is shown in the transfer or enhancement of antimicrobial properties to various materials by modifying them with enzymes. The use of enzymes in biomaterials with antimicrobial properties is important because enzymes can be used as the main active components providing antimicrobial properties of functionalized composite biomaterials, or can serve as enhancers of the antimicrobial action of certain substances (antibiotics, antimicrobial peptides, metal nanoparticles, etc.) against cells of various microorganisms. Enzymes can simultaneously widen the spectrum of antimicrobial activity of biomaterials. This review presents the most promising enzymes recently used for the production of antibacterial materials, namely hydrolases and oxidoreductases. Computer modeling plays an important role in finding the most effective combinations between enzymes and antimicrobial compounds, revealing their possible interactions. The range of materials that can be functionalized using enzymes looks diverse. The physicochemical characteristics and functionalization methods of the materials have a significant impact on the activity of enzymes. In this context, fibrous materials are of particular interest. The purpose of this review is to analyze the current state of the art in this area.

The enhanced expression of genes encoding diguanylate cyclases under cold stress contributes to the adhesion and biofilm formation of Shewanella putrefaciens WS13

Shewanella putrefaciens is a special spoilage bacterium of seafood during cold storage, which is easy to form biofilm and bring serious hazard to the seafood quality. Life cycle of biofilm starts after bacterial adhesion, which is essential for the formation and development of biofilm. As a ubiquitous second messenger in bacteria, c-di-GMP regulates the conversion between bacterial planktonic state and biofilm state. In this study, the adhesion and biofilm formation of S. putrefaciens WS13 under 4°C were compared to those under 30°C. Atom force microscope and scanning electron microscope were used to study the bacterial adhesion. Biofilm was analyzed by Fourier transform infrared spectroscopy, Bradford assay and phenol-sulfuric acid method. High-performance liquid chromatographic-tandem mass spectrometric and quantitative real-time PCR were applied to study c-di-GMP level and genes encoding diguanylate cyclases in cells, respectively. Results showed that the swarming mobility of S. putrefaciens WS13 was weaker under 4°C, however, the adhesive force under 4°C was 4–5 times higher than that under 30°C. Biofilm biomass, extracellular polysaccharides and extracellular proteins were 2.5 times, 3 times, and 1.6 times more than those under 30°C, respectively, but biofilm composition formed under both temperatures were similar. c-di-GMP level in S. putrefaciens WS13 under 30°C was no more than half of that in the corresponding growth stage under 4°C. Quantitative real-time PCR analysis also showed that the expression of genes encoding diguanylate cyclases were significantly enhanced under 4°C than that under 30°C. S. putrefaciens WS13 adapted to the cold stress by enhancing the expression of genes encoding diguanylate cyclases to promote bacterial adhesion and biofilm formation. This study provides a theoretical foundation for the research on the cold adaptation mechanism of specific spoilage bacteria of seafood based on c-di-GMP, and also provides a new idea to control seafood quality from the perspective of microbial molecular biology.

Recent Advances in Antimicrobial Coatings and Material Modification Strategies for Preventing Urinary Catheter-Associated Complications

In recent years, we have witnessed prominent improvements in urinary catheter coatings to tackle the commonly occurring catheter-associated urinary tract infection (CAUTI) in catheterized patients. CAUTIs are claimed to be one of the most frequent nosocomial infections that can lead to various complications, from catheter encrustation to severe septicaemia and pyelonephritis. Besides general prevention hygienic strategies, antimicrobial-coated urinary catheters show great potential in the prevention of urinary catheter-associated complications. The aim of this review is to present and evaluate recent updates on the development of antimicrobial urinary catheters in the context of the aetiology of urinary malfunction. Subsequently, we shed some light on future perspectives of utilizing 3D printing and the surrounding regulatory directions.

Enzymatic Dispersion of Biofilms: An Emerging Biocatalytic Avenue to Combat Biofilm-Mediated Microbial Infections

Drug resistance by pathogenic microbes has emerged as a matter of great concern to mankind. Microorganisms such as bacteria and fungi employ multiple defense mechanisms against drugs and the host immune system. A major line of microbial defense is the biofilm, which comprises extracellular polymeric substances that are produced by the population of microorganisms. Around 80% of chronic bacterial infections are associated with biofilms. The presence of biofilms can increase the necessity of doses of certain antibiotics up to 1000-fold to combat infection. Thus, there is an urgent need for strategies to eradicate biofilms. Although a few physicochemical methods have been developed to prevent and treat biofilms, these methods have poor efficacy and biocompatibility. In this review, we discuss the existing strategies to combat biofilms and their challenges. Subsequently, we spotlight the potential of enzymes, in particular, polysaccharide degrading enzymes, for biofilm dispersion, which might lead to facile antimicrobial treatment of biofilm-associated infections.

Regulation of Biofilm Exopolysaccharide Biosynthesis and Degradation in Pseudomonas aeruginosa

Microbial communities enmeshed in a matrix of macromolecules, termed as biofilms, are the natural setting of bacteria. Exopolysaccharide is a critical matrix component of biofilms. Here, we focus on biofilm matrix exopolysaccharides in Pseudomonas aeruginosa. This opportunistic pathogen can adapt to a wide range of environments and can form biofilms or aggregates in a variety of surfaces or environments, such as the lungs of people with cystic fibrosis, catheters, wounds, and contact lenses. The ability to synthesize multiple exopolysaccharides is one of the advantages that facilitate bacterial survival in different environments. P. aeruginosa can produce several exopolysaccharides, including alginate, Psl, Pel, and lipopolysaccharide. In this review, we highlight the roles of each exopolysaccharide in P. aeruginosa biofilm development and how bacteria coordinate the biosynthesis of multiple exopolysaccharides and bacterial motility. In addition, we present advances in antibiofilm strategies targeting matrix exopolysaccharides, with a focus on glycoside hydrolases.

Expected final online publication date for the Annual Review of Microbiology, Volume 76 is September 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Redirecting marine antibiofouling innovations from sustainable horizons

Biofouling has great environmental, economic, and societal impacts. Emerging and promising strategies for antibiofouling require incorporation of sustainability concepts. To this end, key research priorities should be given to disrupting attachment of organisms or engineering innovative surfaces to slough off fouling organisms from the surfaces, with more holistic considerations of other viable options, including eco-friendly antifouling chemicals.

Long-Term Reduction of Bacterial Adhesion on Polyurethane by an Ultra-Thin Surface Modifier

Indwelling urinary catheters are employed widely to relieve urinary retention in patients. A common side effect of the use of these catheters is the formation of urinary tract infections (UTIs), which can lead not only to severe medical complications, but even to death. A number of approaches have been used to attempt reduction in the rate of UTI development in catheterized patients, which include the application of antibiotics and modification of the device surface by coatings. Many of these coatings have not seen use on catheters in medical settings due to either the high cost of their implementation, their long-term stability, or their safety. In previous work, it has been established that the simple, stable, and easily applicable sterilization surface coating 2-(3-trichlorosilylpropyloxy)-ethyl hydroxide (MEG-OH) can be applied to polyurethane plastic, where it greatly reduces microbial fouling from a variety of species for a 1-day time period. In the present work, we establish that this coating is able to remain stable and provide a similarly large reduction in fouling against Escherichia coli and Staphylococcus aureus for time periods in an excess of 30 days. This non-specific coating functioned against both Gram-positive and Gram-negative bacteria, providing a log 1.1 to log 1.9 reduction, depending on the species and day. This stability and continued efficacy greatly suggest that MEG-OH may be capable of providing a solution to the UTI issue which occurs with urinary catheters.

Immobilized enzymes as potent antibiofilm agent

Biofilm has been a point of concern in hospitals and various industries. They not only cause various chronic infections but are also responsible for the degradation of various medical appliances. Since the last decade, various alternate strategies are being adopted to combat the biofilm formed on various biotic and abiotic surfaces. The use of enzymes as a potent anti-fouling agent is proved to be of utmost importance as the enzymes can inhibit biofilm formation in an eco-friendly and cost-effective way. The physical and chemical immobilization of the enzyme not only leads to the improvement of thermostability and reusability of the enzyme, but also gains better efficiency of biofilm removal. Immobilization of amylase, cellobiohydrolase, pectinase, subtilisin A and β-N-acetyl-glucosaminidase (DspB) are proved to be most effective in inhibition of biofilm formation and removal of matured biofilm than their free forms. Hence, these immobilized enzymes provide greater eradication of biofilm formed on various surfaces and are coming up to be the potent antibiofilm agent.

Preventing Pseudomonas aeruginosa Biofilms on Indwelling Catheters by Surface-Bound Enzymes

Implanted medical devices such as central venous catheters are highly susceptible to microbial colonization and biofilm formation and are a major risk factor for nosocomial infections. The opportunistic pathogen Pseudomonas aeruginosa uses exopolysaccharides, such as Psl, for both initial surface attachment and biofilm formation. We have previously shown that chemically immobilizing the Psl-specific glycoside hydrolase, PslG_h, to a material surface can inhibit P. aeruginosa biofilm formation. Herein, we show that PslG_h can be uniformly immobilized on the lumen surface of medical-grade, commercial polyethylene, polyurethane, and polydimethylsiloxane (silicone) catheter tubing. We confirmed that the surface-bound PslG_h was uniformly distributed along the catheter length and remained active even after storage for 30 days at 4 °C. P. aeruginosa colonization and biofilm formation under dynamic flow culture conditions in vitro showed a 3-log reduction in the number of bacteria during the first 11 days, and a 2-log reduction by day 14 for PslG_h-modified PE-100 catheters, compared to untreated catheter controls. In an in vivo rat infection model, PslG_h-modified PE-100 catheters showed a ∼1.5-log reduction in the colonization of the clinical P. aeruginosa ATCC 27853 strain after 24 h. These results demonstrate the robust ability of surface-bound glycoside hydrolase enzymes to inhibit biofilm formation and their potential to reduce rates of device-associated infections.

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured through ink-jet-based 3D printing using bacterial biofilm inhibiting formulations without the need for eluting antibiotics or coatings. Candidate monomers were formulated and their processability and reliability demonstrated. Formulations for in vivo evaluation of the 3D printed structures were selected on the basis of their in vitro bacterial biofilm inhibitory properties and lack of mammalian cell cytotoxicity. In vivo in a mouse implant infection model, Pseudomonas aeruginosa biofilm formation on poly-TCDMDA was reduced by ~99% when compared with medical grade silicone. Whole mouse bioluminescence imaging and tissue immunohistochemistry revealed the ability of the printed device to modulate host immune responses as well as preventing biofilm formation on the device and infection of the surrounding tissues. Since 3D printing can be used to manufacture devices for both prototyping and clinical use, the versatility of ink-jet based 3D-printing to create personalised functional medical devices is demonstrated by the biofilm resistance of both a finger joint prosthetic and a prostatic stent printed in poly-TCDMDA towards P. aeruginosa and Staphylococcus aureus.

Expression of Biofilm-Degrading Enzymes in Plants and Automated High-Throughput Activity Screening Using Experimental Bacillus subtilis Biofilms

Biofilm-forming bacteria are sources of infections because they are often resistant to antibiotics and chemical removal. Recombinant biofilm-degrading enzymes have the potential to remove biofilms gently, but they can be toxic toward microbial hosts and are therefore difficult to produce in bacteria. Here, we investigated Nicotiana species for the production of such enzymes using the dispersin B-like enzyme Lysobacter gummosus glyco 2 (Lg2) as a model. We first optimized transient Lg2 expression in plant cell packs using different subcellular targeting methods. We found that expression levels were transferable to differentiated plants, facilitating the scale-up of production. Our process yielded 20 mg kg⁻¹ Lg2 in extracts but 0.3 mg kg⁻¹ after purification, limited by losses during depth filtration. Next, we established an experimental biofilm assay to screen enzymes for degrading activity using different Bacillus subtilis strains. We then tested complex and chemically defined growth media for reproducible biofilm formation before converting the assay to an automated high-throughput screening format. Finally, we quantified the biofilm-degrading activity of Lg2 in comparison with commercial enzymes against our experimental biofilms, indicating that crude extracts can be screened directly. This ability will allow us to combine high-throughput expression in plant cell packs with automated activity screening.

Behavior of Pseudomonas aeruginosa strains on the nanopillar topography of dragonfly (Pantala flavescens) wing under flow conditions

Bacterial associated infection is a threat in the medical field. Pseudomonas aeruginosa, one of the major causative agents for nosocomial infection, has developed resistance to almost all the classes of antibiotics. Recently, nanopillar-like structures were identified on the wings of insects such as cicada and dragonfly. Nanopillars both on natural surfaces and those mimicked on artificial surfaces were reported to possess bactericidal activity against a wide range of bacteria. An earlier study reported strain specific variation in the viability of P. aeruginosa on the nanopillar topography of a dragonfly wing under static condition. Here, we report the behavior of P. aeruginosa strains on a dragonfly wing under hydrodynamic conditions. The results of the study indicated that, under hydrodynamic conditions, P. aeruginosa PAO1 was attached in higher numbers to the wing surface than P. aeruginosa ATCC 9027 but killed in lower numbers. The plausible reason was identified to be the masking of nanopillars by the secreted extracellular polysaccharide. The shear rate of 1.0 s^-1 showed a relatively higher bactericidal effect among the three tested shear rates.

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.

Rediscovering bacterial exopolysaccharides of terrestrial and marine origins: novel insights on their distribution, biosynthesis, biotechnological production, and future perspectives

Bacteria exist in colonies as aggregates or associated with surfaces forming biofilms rather than planktonic cells. Living in such a unique manner is always mediated via a matrix of extracellular polymeric substances, which are composed mainly of polysaccharides or specifically exopolysaccharides (EPS). Biofilm formation and hence EPS production are affected by biotic and abiotic factors inducing/inhibiting several involved genes and other molecules. In addition, various aspects of bacterial EPS regarding: physiological functions, molecular weight, and chemical composition were demonstrated. Recent investigations have revealed a wide spectrum of EPS chemical and physicochemical properties showing promising applications in different industrial sectors. For instance, lactic acid bacteria (LAB)- and marine-derived EPS exhibit: immunomodulatory, antioxidant, antitumor, bioremediation of heavy metals, as well as thickening and viscosity modifiers in the food industry. However, bacterial EPS have not yet been commercially implemented, in contrast to plant-derived analogues. The current review aims to rediscover the EPS structural and biosynthetic features derived from marine and terrestrial bacteria, and applications as well.

Antibiotic-Impregnated Liquid-Infused Coatings Suppress the Formation of Methicillin-Resistant Staphylococcus aureus Biofilms

Medical device-associated infections are an ongoing problem. Once an implant is infected, bacteria create a complex community on the surface known as a biofilm, protecting the bacterial cells against antibiotics and the immune system. To prevent biofilm formation, several coatings have been engineered to hinder bacterial adhesion or viability. In recent years, liquid-infused surfaces (LISs) have been shown to be effective in repelling bacteria due to the presence of a tethered liquid interface. However, local lubricant loss or temporary local displacement can lead to bacteria penetrating the lubrication layer, which can then attach to the surface, proliferate, and form a biofilm. Biofilm formation on biomedical devices can subsequently disrupt the chemistry tethering the slippery liquid interface, causing the LIS coating to fail completely. To address this concern, we developed a "fail-proof" multifunctional coating through the combination of a LIS with tethered antibiotics. The coatings were tested on a medical-grade stainless steel using contact angle, sliding angle, and Fourier transform infrared spectroscopy. The results confirm the presence of antibiotics while maintaining a stable and slippery liquid interface. The antibiotic liquid-infused surface significantly reduced biofilm formation (97% reduction compared to the control) and was tested against two strains of Staphylococcus aureus, including a methicillin-resistant strain. We also demonstrated that antibiotics remain active and reduce bacteria proliferation after subsequent coating modifications. This multifunctional approach can be applied to other biomaterials and provide not only a fail-safe but a fail-proof strategy for preventing bacteria-associated infections.

Slime control in paper mill using biological agents as biocides

The environmental conditions of paper mills are suitable for the growth of slime-forming microorganisms due to the supply of nutrients, favorable temperature, and moisture. The slime formation causes the spoilage of raw materials & additives, breaks in the paper during papermaking, loss of production, reduces the hygienic quality of the end products, produces off-spec and rejected products, creates microbiological corrosion, and produces harmful gases. The main microorganisms are Bacteria (mainly Bacillus spp., Achromobacter spp., Enterobacter spp., Pseudomonas spp., Clostridium, etc.), Fungi (Aspergillus, Penicillium, Saccharomyces, etc.), and Algae. Besides the use of conventional toxic chemical biocides or slimicides, slime formation can also be controlled in an eco-friendly way using enzymes, bacteriophages, biodispersants, and biocontrol agents alone or along with biocides to remove the slime. Enzymes have shown their effectiveness over conventional chemicals due to nontoxic and biodegradable nature to provide clean and sustainable technology. Globally enzymes are being used at some of the paper mills and many enzymatic products are presently being prepared and under the trail at laboratory scale. The specificity of enzymes to degrade a specific substrate is the main drawback of controlling the mixed population of microorganisms present in slime. The enzyme has the potential to provide the chemical biocide-free solution as a useful alternative in the future with the development of new technologies. Microorganisms control in the paper mill may appear as a costly offer but the cost of uncontrolled microbial growth can be much higher leading to slime production and large economic drain.

Reduction of microbial adhesion on polyurethane by a sub-nanometer covalently-attached surface modifier

Indwelling urinary catheters are a common medical device used to relieve urinary retention. Many patients who undergo urinary catheterization develop urinary tract infections (UTIs), which can lead to severe medical complications and high cost of subsequent treatment. Recent years have seen a number of attempts at reducing the rate of UTIs in catheterized patients via catheter surface modifications. In this work, a low cost, robust anti-thrombogenic, and sterilizable anti-fouling layer based on a covalently-bound monoethylene glycol hydroxide (MEG-OH) was attached to polyurethane, a polymeric material commonly used to fabricate catheters. Modified polyurethane tubing was compared to bare tubing after exposure to a wide spectrum of pathogens including Gram-negative bacteria (Pesudomonas aeruginosa, Escherichia coli), Gram-positive bacteria (Staphylococcus aureus) and a fungus (Candida albicans). It has been demonstrated that the MEG-OH monolayer was able to significantly reduce the amount of adhesion of pathogens present on the material surface, with between 85 and 96 % reduction after 24 h of exposure. Additionally, similar reductions in surface fouling were observed following autoclave sterilization, long term storage of samples in air, and longer exposure up to 3 days.

Antibacterial and anti-inflammatory ultrahigh molecular weight polyethylene/tea polyphenol blends for artificial joint applications

Periprosthetic joint infection (PJI) is one of the main causes for the failure of joint arthroplasty. In view of the limited clinical effect of oral/injectable antibiotics and the drug resistance problem, there is a pressing need to develop antibacterial implants with therapeutic antimicrobial properties. In this work, we prepared a highly antibacterial ultrahigh molecular weight polyethylene (UHMWPE) implant by incorporating tea polyphenols. The presence of tea polyphenols not only improved the oxidation stability of irradiated UHMWPE, but also gave it the desirable antibacterial property. The potent antibacterial activity was attributed to the tea polyphenols that produced excess intracellular reactive oxygen species and destroyed the bacterial membrane structure. The tea polyphenol-blended UHMWPE had no biological toxicity to human adipose-derived stem cells and effectively reduced bacteria-induced inflammation in vivo. These results indicate that tea polyphenol-blended UHMWPE is promising for joint replacement prostheses with multifunctionality to meet patient satisfaction.

A Colorimetric Assay to Enable High-Throughput Identification of Biofilm Exopolysaccharide-Hydrolyzing Enzymes

Glycosidase enzymes that hydrolyze the biofilm exopolysaccharide poly-β-(1→6)-N-acetylglucosamine (PNAG) are critical tools to study biofilm and potential therapeutic biofilm dispersal agents. Function-driven metagenomic screening is a powerful approach for the discovery of new glycosidase but requires sensitive assays capable of distinguishing between the desired enzyme and functionally related enzymes. Herein, we report the synthesis of a colorimetric PNAG disaccharide analogue whose hydrolysis by PNAG glycosidases results in production of para-nitroaniline that can be continuously monitored at 410 nm. The assay is specific for enzymes capable of hydrolyzing PNAG and not related β-hexosaminidase enzymes with alternative glycosidic linkage specificities. This analogue enabled development of a continuous colorimetric assay for detection of PNAG hydrolyzing enzyme activity in crude E. coli cell lysates and suggests that this disaccharide probe will be critical for establishing the functional screening of metagenomic DNA libraries.

Glycoside hydrolase (PelAh) immobilization prevents Pseudomonas aeruginosa biofilm formation on cellulose-based wound dressing

Bacterial cellulose (BC) is recognized as a wound dressing material well-suited for chronic wounds; however, it has no intrinsic antimicrobial activity. Further, the formation of biofilms can limit the effectiveness of the pre-saturation of BC with antimicrobial agents. Here, to hinder biofilm formation by P. aeruginosa, we immobilized the hydrolytic domain of PelA (a glycohydrolase involved in the synthesis of biofilm polysaccharide Pel) on the surface of BC. The immobilization of 32.35 ± 1.05 mg PelA_h per g BC membrane resulted in an eight-fold higher P. aeruginosa cell detachment from BC membrane, indicating reduced biofilm matrix stability. Further, 1D and 2D infrared spectroscopy analysis indicated systematic reduction of polysaccharide biofilm elements, confirming the specificity of immobilized PelA_h. Importantly, BC-PelA_h was not cytotoxic towards L929 fibroblast cells. Thus, we conclude that PelA_h can be used in BC wound dressings for safe and specific protection against biofilm formation by P. aeruginosa.

Multitarget Approaches against Multiresistant Superbugs

Despite efforts to develop new antibiotics, antibacterial resistance still develops too fast for drug discovery to keep pace. Often, resistance against a new drug develops even before it reaches the market. This continued resistance crisis has demonstrated that resistance to antibiotics with single protein targets develops too rapidly to be sustainable. Most successful long-established antibiotics target more than one molecule or possess targets, which are encoded by multiple genes. This realization has motivated a change in antibiotic development toward drug candidates with multiple targets. Some mechanisms of action presuppose multiple targets or at least multiple effects, such as targeting the cytoplasmic membrane or the carrier molecule bactoprenol phosphate and are therefore particularly promising. Moreover, combination therapy approaches are being developed to break antibiotic resistance or to sensitize bacteria to antibiotic action. In this Review, we provide an overview of antibacterial multitarget approaches and the mechanisms behind them.

Survival strategy of Pseudomonas aeruginosa on the nanopillar topography of dragonfly (Pantala flavescens) wing

Discovery of nanopillars on the surface of the insect wings had led to the understanding of its bactericidal property. Nanopillar topography is deterrent to only those bacteria that are attached, or in close contact with the nanopillars. The present study investigated the variation in the viability of Pseudomonas aeruginosa strains PAO1 (virulent) and ATCC 9027 (avirulent) on the wing surface of dragonfly (Pantala flavescens). Viability study indicated that only 0.2% ATCC 9027 survived when incubated with wing for 48 h in Phosphate buffered saline, while under the same conditions 43.47% PAO1 survived. Enumeration of Pseudomonas attached to wing surface suggested that, the number of PAO1 attached on the wing surface was three times lesser than ATCC 9027. Propensity of attachment of P. aeruginosa strains PAO1 and ATCC 9027 on the wing surface investigated using scanning probe microscope indicated that P. aeruginosa ATCC 9027 showed adhesion to 88% of regions and, PAO1 showed adhesion to only 48% regions tested on wing surface. PAO1 survived the bactericidal effect of wing surface by evading attachment. Three clinical isolates tested which showed viability similar to PAO1 strain, also showed lower propensity to attach to wing surface. Transcriptional level analyses using RT-PCR suggested that flagellar genes (fliE and fleS) were downregulated and genes responsible for reversible to irreversible attachment (gcbA and rsmZ) were upregulated in ATCC 9027 than PAO1 on wing surface, indicating relatively higher attachment of ATCC 9027 on wing surface. The study suggests that virulent strains of P. aeruginosa may evade attachment on wing surface. The results gain significance as bioinspired surfaces are being created towards developing antibacterial medical implants and other antibacterial surface applications.

An on-demand nanoplatform for enhanced elimination of drug-resistant bacteria

We establish an “on-demand” nanoplatform based on acid-degradable scaffolds by conjugating glycomimetic-based galactose ligands to target a key lectin on P. aeruginosa and guanidine moieties.

Urinary Catheter Coating Modifications: The Race against Catheter-Associated Infections

Urinary catheters are common medical devices, whose main function is to drain the bladder. Although they improve patients’ quality of life, catheter placement predisposes the patient to develop a catheter-associated urinary tract infection (CAUTI). The catheter is used by pathogens as a platform for colonization and biofilm formation, leading to bacteriuria and increasing the risk of developing secondary bloodstream infections. In an effort to prevent microbial colonization, several catheter modifications have been made ranging from introduction of antimicrobial compounds to antifouling coatings. In this review, we discuss the effectiveness of different coatings in preventing catheter colonization in vitro and in vivo, the challenges in fighting CAUTIs, and novel approaches targeting host–catheter–microbe interactions.

Differential Recognition of Deacetylated PNAG Oligosaccharides by a Biofilm Degrading Glycosidase

Exopolysaccharides consisting of partially de-N-acetylated poly-β-d-(1→6)-N-acetyl-glucosamine (dPNAG) are key structural components of the biofilm extracellular polymeric substance of both Gram-positive and Gram-negative human pathogens. De-N-acetylation is required for the proper assembly and function of dPNAG in biofilm development suggesting that different patterns of deacetylation may be preferentially recognized by proteins that interact with dPNAG, such as Dispersin B (DspB). The enzymatic degradation of dPNAG by the Aggregatibacter actinomycetemcomitans native β-hexosaminidase enzyme DspB plays a role in biofilm dispersal. To test the role of substrate de-N-acetylation on substrate recognition by DspB, we applied an efficient preactivation-based one-pot glycosylation approach to prepare a panel of dPNAG trisaccharide analogs with defined acetylation patterns. These analogs served as effective DspB substrates, and the rate of hydrolysis was dependent on the specific substrate de-N-acetylation pattern, with glucosamine (GlcN) located +2 from the site of cleavage being preferentially hydrolyzed. The product distributions support a primarily exoglycosidic cleavage activity following a substrate assisted cleavage mechanism, with the exception of substrates containing a nonreducing GlcN that were cleaved endo leading to the exclusive formation of a nonreducing disaccharide product. These observations provide critical insight into the substrate specificity of dPNAG specific glycosidase that can help guide their design as biocatalysts.

Ega3 from the fungal pathogen Aspergillus fumigatus is an endo-α-1,4-galactosaminidase that disrupts microbial biofilms

Aspergillus fumigatus is an opportunistic fungal pathogen that causes both chronic and acute invasive infections. Galactosaminogalactan (GAG) is an integral component of the A. fumigatus biofilm matrix and a key virulence factor. GAG is a heterogeneous linear α-1,4-linked exopolysaccharide of galactose and GalNAc that is partially deacetylated after secretion. A cluster of five co-expressed genes has been linked to GAG biosynthesis and modification. One gene in this cluster, ega3, is annotated as encoding a putative α-1,4-galactosaminidase belonging to glycoside hydrolase family 114 (GH114). Herein, we show that recombinant Ega3 is an active glycoside hydrolase that disrupts GAG-dependent A. fumigatus and Pel polysaccharide-dependent Pseudomonas aeruginosa biofilms at nanomolar concentrations. Using MS and functional assays, we demonstrate that Ega3 is an endo-acting α-1,4-galactosaminidase whose activity depends on the conserved acidic residues, Asp-189 and Glu-247. X-ray crystallographic structural analysis of the apo Ega3 and an Ega3-galactosamine complex, at 1.76 and 2.09 Å resolutions, revealed a modified (β/α)₈-fold with a deep electronegative cleft, which upon ligand binding is capped to form a tunnel. Our structural analysis coupled with in silico docking studies also uncovered the molecular determinants for galactosamine specificity and substrate binding at the -2 to +1 binding subsites. The findings in this study increase the structural and mechanistic understanding of the GH114 family, which has >600 members encoded by plant and opportunistic human pathogens, as well as in industrially used bacteria and fungi.

The Therapeutic Pipeline for Pseudomonas aeruginosa Infections

Pseudomonas aeruginosa is a Gram-negative opportunistic pathogen, designated by the World Health Organization as a critical priority for development of new therapeutics due to high levels of intrinsic and acquired antibiotic resistance. Other challenges include its versatility (it can persist in the environment and most strains are capable of causing disease in compromised hosts), robust efflux mechanisms that limit drug penetration, and the propensity to form antimicrobial-tolerant biofilms. Novel therapeutics in development to prevent or treat P. aeruginosa infections include vaccines, biologics such as antimicrobial peptides and therapeutic antibodies, virulence inhibitors, antimicrobials with novel targets, antibody-drug conjugates, resistance inhibitor-antibiotic or antibiotic-potentiator combinations, and bacteriophages or phage-derived lysins.