Contribution of bone marrow-derived cells to in situ engineered tissue capsules in a rat model of chronic kidney disease

Artificial intelligence application in adsorption of uremic toxins: Towards the eco-friendly design of highly efficient with potential applications as hemodialysis membranes

Six Functionalized Activated Carbon Cloths (FACCs) were designed to obtain fundamental information for training a Bayesian Regularized Artificial Neural Network (BRANN) capable of predicting adsorption capacity of the FACCs to synthesize tailor-made materials with potential application as dialysis membranes. Characterization studies showed that FACCs have a high surface area (1354-2073 m2 g-1) associated with increased microporosity (W0, average: 0.57 cm3 g-1). Materials are carbonaceous, with a carbon content between 69 and 92%. Chemical treatments modify the pHpzc of materials between 4.1 and 7.8 due to incorporating functional groups on the surface (C=O, -COOH, -OH, -NH, -NH2). Uremic toxins tests showed a high elimination rate of p-cresol (73 mg g-1) and creatinine (90 mg g-1) which is not affected by the matrix (aqueous solution and simulated serum). However, in the case of uric acid, adsorption capacity decreased from 143 mg g-1 to 71 mg g-1, respectively. When comparing the kinetic constants of the adsorption studies in simulated serum versus the studies in aqueous solution, it can be seen that this does not undergo significant changes (0.02 min-1), evidencing the versatility of the material to work in different matrices. The previous studies, in combination with characterization of the materials, allowed to establish the adsorption mechanism. Thus, it permitted to train the BRANN to obtain mathematical models capable to predict the kinetic adsorption of the toxins studied. It is concluded that the predominant adsorption mechanism is due to π-π interactions between the adsorbate unsaturations with the material's pseudo-graphitic planes. Results show that FACCs are promising materials for hemodialysis membranes. Finally, taking into consideration the adsorption capacities and rates, as well as the semiquantitative analysis of the environmental impact associated with the preparation of the adsorbents, the best adsorbent (CC, Eco-Scale = 91.5) was selected. The studies presented show that the material is eco-friendly and highly efficient in the elimination of uremic toxins.

The effect of chronic kidney disease on tissue formation of in situ tissue-engineered vascular grafts

Vascular in situ tissue engineering encompasses a single-step approach with a wide adaptive potential and true off-the-shelf availability for vascular grafts. However, a synchronized balance between breakdown of the scaffold material and neo-tissue formation is essential. Chronic kidney disease (CKD) may influence this balance, lowering the usability of these grafts for vascular access in end-stage CKD patients on dialysis. We aimed to investigate the effects of CKD on in vivo scaffold breakdown and tissue formation in grafts made of electrospun, modular, supramolecular polycarbonate with ureido-pyrimidinone moieties (PC-UPy). We implanted PC-UPy aortic interposition grafts (n = 40) in a rat 5/6th nephrectomy model that mimics systemic conditions in human CKD patients. We studied patency, mechanical stability, extracellular matrix (ECM) components, total cellularity, vascular tissue formation, and vascular calcification in CKD and healthy rats at 2, 4, 8, and 12 weeks post-implantation. Our study shows successful in vivo application of a slow-degrading small-diameter vascular graft that supports adequate in situ vascular tissue formation. Despite systemic inflammation associated with CKD, no influence of CKD on patency (Sham: 95% vs CKD: 100%), mechanical stability, ECM formation (Sirius red⁺, Sham 16.5% vs CKD 25.0%-p:0.83), tissue composition, and immune cell infiltration was found. We did find a limited increase in vascular calcification at 12 weeks (Sham 0.08% vs CKD 0.80%-p:0.02) in grafts implanted in CKD animals. However, this was not associated with increased stiffness in the explants. Our findings suggest that disease-specific graft design may not be necessary for use in CKD patients on dialysis.

A Systematic Review of the Evidence of Hematopoietic Stem Cell Differentiation to Fibroblasts

Fibroblasts have an important role in the maintenance of the extracellular matrix of connective tissues by producing and remodelling extracellular matrix proteins. They are indispensable for physiological processes, and as such also associate with many pathological conditions. In recent years, a number of studies have identified donor-derived fibroblasts in various tissues of bone marrow transplant recipients, while others could not replicate these findings. In this systematic review, we provide an overview of the current literature regarding the differentiation of hematopoietic stem cells into fibroblasts in various tissues. PubMed, Embase, and Web of Science (Core Collection) were systematically searched for original articles concerning fibroblast origin after hematopoietic stem cell transplantation in collaboration with a medical information specialist. Our search found 5421 studies, of which 151 were analysed for full-text analysis by two authors independently, resulting in the inclusion of 104 studies. Only studies in animals and humans, in which at least one marker was used for fibroblast identification, were included. The results were described per organ of fibroblast engraftment. We show that nearly all mouse and human organs show evidence of fibroblasts of hematopoietic stem cell transfer origin. Despite significant heterogeneity in the included studies, most demonstrate a significant presence of fibroblasts of hematopoietic lineage in non-hematopoietic tissues. This presence appears to increase after the occurrence of tissue damage.

Control Delivery of Multiple Growth Factors to Actively Steer Differentiation and Extracellular Matrix Protein Production

In tissue engineering, biomaterials have been used to steer the host response. This determines the outcome of tissue regeneration, which is modulated by multiple growth factors (GFs). Hence, a sustainable delivery system for GFs is necessary to control tissue regeneration actively. A delivery technique of single and multiple GF combinations, using a layer-by-layer (LBL) procedure to improve tissue remodeling, is developed. TGF-β1, PDGF-ββ, and IGF-1 are incorporated on tailor-made polymeric rods, which could be used as a tool for potential tissue engineering applications, such as templates to induce the formation of in situ tissue engineered blood vessels (TEBVs). Cell response is analyzed in vitro using rat and human dermal fibroblasts for cellular proliferation, fibroblast differentiation, and extracellular matrix (ECM) protein synthesis. Results revealed a higher loading efficiency and control release of GFs incorporated on chloroform and oxygen plasma-activated (COX) rods. Single PDGF-ββ and IGF-1 release, and dual release with TGF-β1 from COX rods, showed higher cell proliferation when compared to COX rods alone. A substantial increase in α-smooth muscle actin (α-SMA) is also observed in GF releasing COX rods, with TGF-β1 COX rods providing the most pronounced differentiation. A significant increase in collagen and elastin synthesis is observed on all GF releasing COX rods compared to control, with COX rods releasing TGF-β1 and IGF-1 providing the highest secretion. TGF-β1 and IGF-1 releasing COX rods induced higher Glycosaminoglycan (GAG)/DNA amounts than the other GF releasing COX rods. As PDGF-ββ and TGF-β1/PDGF-ββ COX rods displayed the highest fibroblast attachment, these rods provided the highest total collagen and elastin production. The attractive results from efficiently incorporating single and multiple GFs on COX rods and their sustainable release to steer cellular behavior suggest a promising route to enrich the formation of in situ engineered tissues.

Cellular remodeling of fibrotic conduit as vascular graft

The replacement of small-diameter arteries remains an unmet clinical need. Here we investigated the cellular remodeling of fibrotic conduits as vascular grafts. The formation of fibrotic conduit around subcutaneously implanted mandrels involved not only fibroblasts but also the trans-differentiation of inflammatory cells such as macrophages into fibroblastic cells, as shown by genetic lineage tracing. When fibrotic conduits were implanted as vascular grafts, the patency was low, and many fibrotic cells were found in neointima. Decellularization and anti-thrombogenic coating of fibrotic conduits produced highly patent autografts that remodeled into neoarteries, offering an effective approach to obtain autografts for clinical therapy. While autografts recruited mostly anti-inflammatory macrophages for constructive remodeling, allogenic DFCs had more T cells and pro-inflammatory macrophages and lower patency. Endothelial progenitors and endothelial migration were observed during endothelialization. Cell infiltration into DFCs was more efficient than decellularized arteries, and infiltrated cells remodeled the matrix and differentiated into smooth muscle cells (SMCs). This work provides insight into the remodeling of fibrotic conduits, autologous DFCs and allogenic DFCs, and will have broad impact on using fibrotic matrix for regenerative engineering.

A novel method for engineering autologous non-thrombogenic in situ tissue-engineered blood vessels for arteriovenous grafting

The durability of prosthetic arteriovenous (AV) grafts for hemodialysis access is low, predominantly due to stenotic lesions in the venous outflow tract and infectious complications. Tissue engineered blood vessels (TEBVs) might offer a tailor-made autologous alternative for prosthetic grafts. We have designed a method in which TEBVs are grown in vivo, by utilizing the foreign body response to subcutaneously implanted polymeric rods in goats, resulting in the formation of an autologous fibrocellular tissue capsule (TC). One month after implantation, the polymeric rod is extracted, whereupon TCs (length 6 cm, diameter 6.8 mm) were grafted as arteriovenous conduit between the carotid artery and jugular vein of the same goats. At time of grafting, the TCs were shown to have sufficient mechanical strength in terms of bursting pressure (2382 ± 129 mmHg), and suture retention strength (SRS: 1.97 ± 0.49 N). The AV grafts were harvested at 1 or 2 months after grafting. In an ex vivo whole blood perfusion system, the lumen of the vascular grafts was shown to be less thrombogenic compared to the initial TCs and ePTFE grafts. At 8 weeks after grafting, the entire graft was covered with an endothelial layer and abundant elastin expression was present throughout the graft. Patency at 1 and 2 months was comparable with ePTFE AV-grafts. In conclusion, we demonstrate the remodeling capacity of cellularized in vivo engineered TEBVs, and their potential as autologous alternative for prosthetic vascular grafts.

Ectopic chondrogenesis of nude mouse induced by nano gene delivery enhanced tissue engineering technology

Background: Many techniques and methods have been used clinically to relieve pain from cartilage repair, but the long-term effect is still unsatisfactory. Purpose: The objective of this study was to form an artificial chondroid tissue gene enhanced tissue engineering system to repair cartilage defects via nanosized liposomes. Methods: Cationic nanosized liposomes were prepared and characterized using transmission electron microscope (TEM) and dynamic laser light scattering (DLS). The rat mesenchymal stem cells (rMSCs) were isolated, cultivated, and induced by SRY (Sex-Determining Region Y)-Box 9 (Sox9) via cationic nanosized liposomes. The induced rMSCs were mixed with a thermo-sensitive chitosan hydrogel and subcutaneously injected into the nude mice. Finally, the newly-formed chondroid tissue obtained in the injection parts, and the transparent parts were detected by HE, collagen II, and safranin O. Results: It was found that the presently prepared cationic nanosized liposomes had the diameter of 85.76±3.48 nm and the zeta potential of 15.76±2.1 mV. The isolated rMSCs proliferation was fibroblast-like, with a cultivated confluence of 90% confluence in 5-8 days, and stained positive for CD29 and CD44 while negative for CD34 and CD45. After transfection with cationic nanosized liposomes, we observed changes of cellular morphology and a higher expression of SOX9 compared with control groups, which indicated that rMSCs could differentiate into chondrocyte in vitro. By mixing transfected rMSCs with the thermo-sensitive hydrogel of chitosan in nude mice, chondroid tissue was successfully obtained, demonstrating that rMSCs can differentiate into chondrogenic cells in vivo. Conclusion: This study explored new ways to improve the quality of tissue engineered cartilage, thus accelerating clinical transformation and reducing patient pain.