Analysis of protein folding and function using backbone modified proteins

A facile approach for incorporating tyrosine esters to probe ion-binding sites and backbone hydrogen bonds

Amide-to-ester substitutions are used to study the role of the amide bonds of the protein backbone in protein structure, function, and folding. An amber suppressor tRNA/synthetase pair has been reported for incorporation of p-hydroxy-phenyl-L-lactic acid (HPLA), thereby introducing ester substitution at tyrosine residues. However, the application of this approach was limited due to the low yields of the modified proteins and the high cost of HPLA. Here we report the in vivo generation of HPLA from the significantly cheaper phenyl-L-lactic acid. We also construct an optimized plasmid with the HPLA suppressor tRNA/synthetase pair that provides higher yields of the modified proteins. The combination of the new plasmid and the in-situ generation of HPLA provides a facile and economical approach for introducing tyrosine ester substitutions. We demonstrate the utility of this approach by introducing tyrosine ester substitutions into the K+ channel KcsA and the integral membrane enzyme GlpG. We introduce the tyrosine ester in the selectivity filter of the M96V mutant of the KcsA to probe the role of the second ion binding site in the conformation of the selectivity filter and the process of inactivation. We use tyrosine ester substitutions in GlpG to perturb backbone H-bonds to investigate the contribution of these H-bonds to membrane protein stability. We anticipate that the approach developed in this study will facilitate further investigations using tyrosine ester substitutions.

Recent developments in the utility of saturated azaheterocycles in peptidomimetics

To a large extent, the physical and chemical properties of peptidomimetic molecules are dictated by the integrated heterocyclic scaffolds they contain. Heterocyclic moieties are introduced into a majority of peptide-mimicking molecules to modulate conformational flexibility, improve bioavailability, and fine-tune electronics, and in order to achieve potency similar to or better than that of the natural peptide ligand. This mini-review delineates recent developments, limited to the past five years, in the utility of selected saturated 3- to 6-membered heterocyclic moieties in peptidomimetic design. Also discussed is the chemistry involved in the synthesis of the azaheterocyclic scaffolds and the structural implications of the introduction of these azaheterocycles in peptide backbones as well as side chains of the peptide mimics.

Analysis of folded structure and folding thermodynamics in heterogeneous-backbone proteomimetics

Recent years have seen a growing number of examples of designed oligomeric molecules with artificial backbone connectivity that are capable of adopting complex folded tertiary structures analogous to those seen in natural proteins. A range of experimental techniques from structural biology and biophysics have been brought to bear in the study of these proteomimetic agents. Here, we discuss some considerations encountered in the characterization of high-resolution folded structure as well as folding thermodynamics of protein-like artificial backbones. We provide an overview of the use of X-ray crystallography and NMR spectroscopy in such systems and review example applications of these methods in the primary literature. Further, we provide detailed protocols for two experiments that have proved useful in our prior and ongoing efforts to compare folding thermodynamics between natural protein domains and heterogeneous-backbone counterparts.

Comparative conformational analyses and molecular dynamics studies of glycylglycine methyl ester and glycylglycine N-methylamide

Amide–ester substitution and water models significantly alter conformational and solvation properties of glycine–glycine dipeptides.

Advances in Protein-Based Materials: From Origin to Novel Biomaterials

Biomaterials play a very important role in biomedicine and tissue engineering where they directly affect the cellular activities and their microenvironment . Myriad of techniques have been employed to fabricate a vast number natural, artificial and recombinant polymer s in order to harness these biomaterials in tissue regene ration , drug delivery and various other applications. Despite of tremendous efforts made in this field during last few decades, advanced and new generation biomaterials are still lacking. Protein based biomaterials have emerged as an attractive alternatives due to their intrinsic properties like cell to cell interaction , structural support and cellular communications. Several protein based biomaterials like, collagen , keratin , elastin , silk protein and more recently recombinant protein s are being utilized in a number of biomedical and biotechnological processes. These protein-based biomaterials have enormous capabilities, which can completely revolutionize the biomaterial world. In this review, we address an up-to date review on the novel, protein-based biomaterials used for biomedical field including tissue engineering, medical science, regenerative medicine as well as drug delivery. Further, we have also emphasized the novel fabrication techniques associated with protein-based materials and implication of these biomaterials in the domain of biomedical engineering .

Effects of isosteric substitutions on the conformational preference and cis–trans isomerization of proline-containing peptides

Isosteric substitutions of the peptide CO group by CS and CSe groups increased thetranspopulation and rotational barrier to the prolylcis–transisomerization of proline-containing peptides.

Consecutive isocyanide-based multicomponent reactions: synthesis of cyclic pentadepsipeptoids

The synthesis of six cyclic depsipeptoids inspired by the natural depsipeptide sansalvamide A is described. An efficient and fast synthetic strategy was developed using a combination of consecutive isocyanide-based multicomponent reactions (Ugi and Passerini reactions). This methodology can be used to access a variety of cyclic oligodepsipeptoids.

Charge and sequence effects on the self-assembly and subsequent hydrogelation of Fmoc-depsipeptides

Herein we report on the self-assembly of a family of Fmoc-depsipeptides into nanofibers and hydrogels. We show that fiber formation occurs in depsipeptide structures in which the fluorenyl group is closely associated and that side-chain charge and sequence affect the extent of self-assembly and subsequent gelation. Using fluorescence emission spectroscopy and circular dichroism, we show that self-assembly can be monitored and is observed in these slow-gelling systems prior to hydrogel formation. We also demonstrate that the ionic strength of salt-containing solutions affects the time at which self-assembly results in gelation of the bulk solution. From transmission electron microscopy, we report that morphological changes progress over time and are observed as micelles transitioning to fibers prior to the onset of gelation. Gelled depsipeptides degraded at a slower rate than non-gelled samples in the presence of salt, while hydrolysis in water of both gels and solution samples was minimal even after 14 days. Our work shows that while incorporating ester functionality within a peptide backbone reduces the number of hydrogen bonding sites available for forming and stabilizing supramolecular assemblies, the substitution does not prohibit self-assembly and subsequent gelation.

Using protein backbone mutagenesis to dissect the link between ion occupancy and C-type inactivation in K+ channels

K(+) channels distinguish K(+) from Na(+) in the selectivity filter, which consists of four ion-binding sites (S1-S4, extracellular to intracellular) that are built mainly using the carbonyl oxygens from the protein backbone. In addition to ionic discrimination, the selectivity filter regulates the flow of ions across the membrane in a gating process referred to as C-type inactivation. A characteristic of C-type inactivation is a dependence on the permeant ion, but the mechanism by which permeant ions modulate C-type inactivation is not known. To investigate, we used amide-to-ester substitutions in the protein backbone of the selectivity filter to alter ion binding at specific sites and determined the effects on inactivation. The amide-to-ester substitutions in the protein backbone were introduced using protein semisynthesis or in vivo nonsense suppression approaches. We show that an ester substitution at the S1 site in the KcsA channel does not affect inactivation whereas ester substitutions at the S2 and S3 sites dramatically reduce inactivation. We determined the structure of the KcsA S2 ester mutant and found that the ester substitution eliminates K(+) binding at the S2 site. We also show that an ester substitution at the S2 site in the KvAP channel has a similar effect of slowing inactivation. Our results link C-type inactivation to ion occupancy at the S2 site. Furthermore, they suggest that the differences in inactivation of K(+) channels in K(+) compared with Rb(+) are due to different ion occupancies at the S2 site.

Improving Prediction Accuracy via Subspace Modeling in a Statistical Geometry Based Computational Protein Mutagenesis

A computational mutagenesis is detailed whereby each single residue substitution in a protein chain of primary sequence length N is represented as a sparse N-dimensional feature vector, whose M << N nonzero components locally quantify environmental perturbations occurring at the mutated position and its neighbors in the protein structure. The methodology makes use of both the Delaunay tessellation algorithm for representing protein structures, as well as a four-body, knowledge based, statistical contact potential. Feature vectors for each subset of mutants due to all possible residue substitutions at a particular position cohabit the same M-dimensional subspace, where the value of M and the identities of the M nonzero components are similarly position dependent. The approach is used to characterize a large experimental dataset of single residue substitutions in bacteriophage T4 lysozyme, each categorized as either unaffected or affected based on the measured level of mutant activity relative to that of the native protein. Performance of a single classifier trained with the collective set of mutants in N-space is compared to that of an ensemble of position-specific classifiers trained using disjoint mutant subsets residing in significantly smaller subspaces. Results suggest that significant improvements can be achieved through subspace modeling.

Central metal ion determined self-assembly of intrinsically chiral porphyrins

The aggregation of a tetraaryl-porphyrin with chiral amide-containing side groups depends critically on the central metal ion in the tetrapyrrolic core, an effect shown dramatically in solution as well as in the gel formation by the compounds. In solution, the circular dichroism (CD) spectra of the metalloporphyrins show that they all aggregate to some degree, and in most cases the aggregates of the metal-containing species is more favored than the parent free-base porphyrin. The compound which shows the greatest optical activity is the zinc(II) porphyrin which forms a J-aggregate with large Cotton effects in the CD spectrum. Infrared spectroscopy revealed that this aggregate is favored by interaction of the amide oxygen atom with the zinc(II) ion at the core of the porphyrin. The other metalloporphyrins, containing divalent copper, cobalt, and palladium or manganese(III) acetate all show CD activity, and all but the cobalt compound form gels in hexane or cyclohexane. The morphology of the xerogels formed after evaporation of the solvent from these gels depend greatly on the metal ion, with only the copper porphyrin — which shows a clear H-aggregate in solution — having a fibrous morphology

Selective determinants of inositol 1,4,5-trisphosphate and adenophostin A interactions with type 1 inositol 1,4,5-trisphosphate receptors

BACKGROUND AND PURPOSE

Adenophostin A (AdA) is a potent agonist of inositol 1,4,5-trisphosphate receptors (IP(3) R). AdA shares with IP(3) the essential features of all IP(3) R agonists, namely structures equivalent to the 4,5-bisphosphate and 6-hydroxyl of IP(3) , but the basis of its increased affinity is unclear. Hitherto, the 2'-phosphate of AdA has been thought to provide a supra-optimal mimic of the 1-phosphate of IP(3) .

EXPERIMENTAL APPROACH

We examined the structural determinants of AdA binding to type 1 IP(3) R (IP(3) R1). Chemical synthesis and mutational analysis of IP(3) R1 were combined with (3) H-IP(3) binding to full-length IP(3) R1 and its N-terminal fragments, and Ca(2+) release assays from recombinant IP(3) R1 expressed in DT40 cells.

KEY RESULTS

Adenophostin A is at least 12-fold more potent than IP(3) in functional assays, and the IP(3) -binding core (IBC, residues 224-604 of IP(3) R1) is sufficient for this high-affinity binding of AdA. Removal of the 2'-phosphate from AdA (to give 2'-dephospho-AdA) had significantly lesser effects on its affinity for the IBC than did removal of the 1-phosphate from IP(3) (to give inositol 4,5-bisphosphate). Mutation of the only residue (R568) that interacts directly with the 1-phosphate of IP(3) decreased similarly (by ~30-fold) the affinity for IP(3) and AdA, but mutating R504, which has been proposed to form a cation-π interaction with the adenine of AdA, more profoundly reduced the affinity of IP(3) R for AdA (353-fold) than for IP(3) (13-fold).

CONCLUSIONS AND IMPLICATIONS

The 2'-phosphate of AdA is not a major determinant of its high affinity. R504 in the receptor, most likely via a cation-π interaction, contributes specifically to AdA binding.

Modulation of the peptide backbone conformation by the selenoxo photoswitch

Photocontrol of the backbone conformation is a useful step forward in regulating the bioactivities of peptides and proteins by means of external signals. In the present work, the selenium analogue of a peptide bond was introduced into tetrapeptides to obtain surprisingly stable selenoxo peptides. Selenoxo peptide bonds allow for a marked increase of cis content in the photostationary state of peptide chains when irradiated with UV light near 290 nm. Slow thermal re-equilibration with rate constants between 9.9 x 10(-4) and 1.3 x 10(-5) s(-1) shows that the transient nonequilibrium conformations exist long enough to monitor the isomer specificity of biochemical reactions.

Computational backbone mutagenesis of Abeta peptides: probing the role of backbone hydrogen bonds in aggregation

Using replica exchange molecular dynamics (REMD) and united atom implicit solvent model we examine the role of backbone hydrogen bonds (HBs) in Abeta aggregation. The importance of HBs appears to depend on the aggregation stage. The backbone HBs have little effect on the stability of Abeta dimers or on their aggregation interface. The HBs also do not play a critical role in initial binding of Abeta peptides to the amyloid fibril. Their elimination does not change the continuous character of Abeta binding nor its temperature. However, cancellation of HBs forming between incoming Abeta peptides and the fibril disrupts the locked fibril-like states in the bound peptides. Without the support of HBs, bound Abeta peptides form few long beta-strands on the fibril edge. As a result, the deletion of peptide-fibril HBs is expected to impede fibril growth. As for the peptides bound to Abeta fibril the deletion of interpeptide HBs reduces the beta propensity in the dimers making them less competent for amyloid assembly. These simulation findings together with the backbone mutagenesis experiments suggest that a viable strategy for arresting fibril growth is the disruption of interpeptide HBs.

Elucidating the exact role of engineered CRABPII residues for the formation of a retinal protonated Schiff base

Cellular Retinoic Acid Binding Protein II (CRABPII) has been reengineered to specifically bind and react with all-trans-retinal to form a protonated Schiff base. Each step of this process has been dissected and four residues (Lys132, Tyr134, Arg111, and Glu121) within the CRABPII binding site have been identified as crucial for imine formation and/or protonation. The precise role of each residue has been examined through site directed mutagenesis and crystallographic studies. The crystal structure of the R132K:L121E-CRABPII (PDB-3I17) double mutant suggests a direct interaction between engineered Glu121 and the native Arg111, which is critical for both Schiff base formation and protonation.

Localized thermodynamic coupling between hydrogen bonding and microenvironment polarity substantially stabilizes proteins

The energetic contributions of hydrogen bonding to protein folding are still unclear, despite more than 70 years of study. This is due partly to the difficulty of extracting thermodynamic information about specific interactions from protein mutagenesis data and partly to the context dependence of hydrogen bond strengths. Herein, we test the hypothesis that hydrogen bond strengths depend on the polarity of their microenvironment, with stronger hydrogen bonds forming in nonpolar surroundings. Double-mutant cycle analysis using a combination of amide-to-ester backbone mutagenesis and traditional side chain mutagenesis revealed that hydrogen bonds can be stronger by up to 1.2 kcal mol(-1) when they are sequestered in hydrophobic surroundings than when they are solvent exposed. Such large coupling energies between hydrogen bond strengths and local polarity suggest that the context dependence of hydrogen bond strengths must be accounted for in any comprehensive account of the forces responsible for protein folding.

Understanding the mechanism of beta-sheet folding from a chemical and biological perspective

Perturbing the structure of the Pin1 WW domain, a 34-residue protein comprised of three beta-strands and two intervening loops has provided significant insight into the structural and energetic basis of beta-sheet folding. We will review our current perspective on how structure acquisition is influenced by the sequence, which determines local conformational propensities and mediates the hydrophobic effect, hydrogen bonding, and analogous intramolecular interactions. We have utilized both traditional site-directed mutagenesis and backbone mutagenesis approaches to alter the primary structure of this beta-sheet protein. Traditional site-directed mutagenesis experiments are excellent for altering side-chain structure, whereas amide-to-ester backbone mutagenesis experiments modify backbone-backbone hydrogen bonding capacity. The transition state structure associated with the folding of the Pin1 WW domain features a partially H-bonded, near-native reverse turn secondary structure in loop 1 that has little influence on thermodynamic stability. The thermodynamic stability of the Pin1 WW domain is largely determined by the formation of a small hydrophobic core and by the formation of desolvated backbone-backbone H-bonds enveloped by this hydrophobic core. Loop 1 engineering to the consensus five-residue beta-bulge-turn found in most WW domains or a four-residue beta-turn found in most beta-hairpins accelerates folding substantially relative to the six-residue turn found in the wild type Pin1 WW domain. Furthermore, the more efficient five- and four-residue reverse turns now contribute to the stability of the three-stranded beta-sheet. These insights have allowed the design of Pin1 WW domains that fold at rates that approach the theoretical speed limit of folding.

Conformational change from antiparallel beta-sheet to alpha-helix in a series of depsipeptide, -(Leu-Leu-Lac)(n)-: syntheses, spectroscopic studies, and crystal structures of Boc-Leu-Lac-OEt and Boc-(Leu-Leu-Lac)(n)-OEt (n = 1, 2)

The depsipeptides Boc-Leu-Lac-OEt (1) and Boc-(Leu-Leu-Lac)(n)-OEt (n = 1, 2) (2 and 3, respectively) (Boc = tert-butyloxycarbonyl, Lac = L-lactic acid residue) has been synthesized and studied by crystallographic, CD spectroscopic, and ESI-MS analyses. In the packing cells, those three compounds adopt beta-strand conformations. Each molecule is linked into a dimer (1) or an infinite assembly (2 and 3) by tight hydrogen bonds of the type NH...O==C. Interestingly, the hexamer, 3 shows the first example of antiparallel pleated beta-sheet crystal structure for a depsipeptide molecule. In the packing cells, especially for 3, the ester groups O--C==O are perpendicularly oriented to the amide groups NH--C==O and beta-sheet planes to avoid the interaction between --O--(ester) and O==C. Therefore, when the chain length become longer, the O...O==C repulsion interaction works as a beta-sheet breaker and hence promotes an alpha-helical structure as observed for Boc-(Leu-Leu-Lac)(3)-Leu-Leu-OEt (4) (Oku et al. Biopolymers 2004, 75, 242-254) and Boc-(Leu-Leu-Lac)(n)-OEt (n = 4-6) (5-7) (Katakai et al., Biopolymers 1996, 38, 285-290), in which the O...O==C repulsion does not cause significant structural changes in alpha-helical main chains. Therefore from the structural and spectroscopic analyses, we have found governing factors for the specificity in the beta-sheet and alpha-helix decision in this series of depsipeptides, -(Leu-Leu-Lac)(n)-.

Toward quantification of protein backbone-backbone hydrogen bonding energies: An energetic analysis of an amide-to-ester mutation in an alpha-helix within a protein

Amide-to-ester backbone mutagenesis enables a specific backbone-backbone hydrogen bond (H-bond) in a protein to be eliminated in order to quantify its energetic contribution to protein folding. To extract a H-bonding free energy from an amide-to-ester perturbation free energy (DeltaG (folding,wt) - DeltaG (folding,mut)), it is necessary to correct for the putative introduction of a lone pair-lone pair electrostatic repulsion, as well as for the transfer free energy differences that may arise between the all amide sequence and the predominantly amide sequence harboring an ester bond. Mutation of the 9-10 amide bond within the V9F variant of the predominantly helical villin headpiece subdomain (HP35) to an ester or an E-olefin backbone bond results in a less stable but defined wild-type fold, an attribute required for this study. Comparing the folding free energies of the ester and E-olefin mutants, with correction for the desolvation free energy differences (ester and E-olefin) and the loss of an n-to-pi* interaction (E-olefin), yields an experimentally based estimate of +0.4 kcal/mol for the O-O repulsion energy in an alpha-helical context, analogous to our previous experimentally based estimate of the O-O repulsion free energy in the context of a beta-sheet. The small O-O repulsion energy indicates that amide-to-ester perturbation free energies can largely be attributed to the deletion of the backbone H-bonds after correction for desolvation differences. Quantitative evaluation of H-bonding in an alpha-helix should now be possible, an important step toward deciphering the balance of forces that enable spontaneous protein folding.

Direct analysis of backbone-backbone hydrogen bond formation in protein folding transition states

Here we investigate the role of backbone-backbone hydrogen bonding interactions in stabilizing the protein folding transition states of two model protein systems, the B1 domain of protein L (ProtL) and the P22 Arc repressor. A backbone modified analogue of ProtL containing an amide-to-ester bond substitution between residues 105 and 106 was prepared by total chemical synthesis, and the thermodynamic and kinetic parameters associated with its folding reaction were evaluated. Ultimately, these parameters were used in a Phi-value analysis to determine if the native backbone-backbone hydrogen bonding interaction perturbed in this analogue (i.e. a hydrogen bond in the first beta-turn of ProtL's beta-beta-alpha-beta-beta fold) was formed in the transition state of ProtL's folding reaction. Also determined were the kinetic parameters associated with the folding reactions of two Arc repressor analogues, each containing an amide-to-ester bond substitution in the backbone of their polypeptide chains. These parameters were used together with previously established thermodynamic parameters for the folding of these analogues in Phi-value analyses to determine if the native backbone-backbone hydrogen bonding interactions perturbed in these analogues (i.e. a hydrogen bond at the end of the intersubunit beta-sheet interface and hydrogen bonds at the beginning of the second alpha-helix in Arc repressor's beta-alpha-alpha structure) were formed in the transition state of Arc repressor's folding reaction. Our results reveal that backbone-backbone hydrogen bonding interactions are formed in the beta-turn and alpha-helical transition state structures of ProtL and Arc repressor, respectively; and they were not formed in the intersubunit beta-sheet interface of Arc repressor, a region of Arc repressor's polypeptide chain previously shown to have other non-native-like conformations in Arc's protein folding transition state.

Total chemical synthesis of the B1 domain of protein L from Peptostreptococcus magnus

Reported here is a native chemical ligation strategy for the total chemical synthesis of the B1 domain of protein L. A synthetic construct of this 76 amino acid protein domain was prepared by the chemoselective ligation of two unprotected polypeptide fragments, one containing an N-terminal cysteine residue and one containing a C-terminal thioester moiety. The polypeptide fragments utilized in the ligation reaction were readily prepared by stepwise solid phase peptide synthesis (SPPS) methods for Boc-chemistry. The milligram quantities of protein required for conventional biophysical studies were readily accessible using the synthetic protocol described here. The folding properties of the synthetic protein L construct were also determined and found to be very similar to those of a similar wild-type protein L constructs prepared by recombinant-DNA methods. This work facilitates future unnatural amino acid mutagenesis experiments on this model protein system to further dissect the molecular basis of its folding and stability.

On the edge of the denaturation process: Application of X-ray diffraction to barnase and lysozyme cross-linked crystals with denaturants in molar concentrations

Structural data about the early step of protein denaturation were obtained from cross-linked crystals for two small proteins: barnase and lysozyme. Several denaturant agents like urea, bromoethanol or thiourea were used at increasing concentrations up to a limit leading to crystal disruption (>or=2 to 6 M). Before the complete destruction of the crystal order started, specific binding sites were observed at the protein surfaces, an indication that the preliminary step of denaturation is the disproportion of intermolecular polar bonds to the benefit of the agent "parasiting" the surface. The analysis of the thermal factors first agree with a stabilization effect at low or moderate concentration of denaturants rapidly followed by a destabilization at specific weak points when the number of sites increase (overflooding effect).

Backbone-Backbone H-Bonds Make Context-Dependent Contributions to Protein Folding Kinetics and Thermodynamics: Lessons from Amide-to-Ester Mutations

The contribution of backbone-backbone hydrogen bonds (H-bonds) to protein folding energetics has been controversial. This is due, at least in part, to the inability to perturb backbone-backbone H-bonds by traditional methods of protein mutagenesis. Recently, however, protein backbone mutagenesis has become possible with the development of chemical and biological methods to replace individual amides in the protein backbone with esters. Here, we review the use of amide-to-ester mutation as a tool to evaluate the contribution of backbone-backbone H-bonds to protein folding kinetics and thermodynamics.