Manipulations and age-appropriateness of oral medications in pediatric oncology patients in Sweden: Need for personalized dosage forms

Rational prescribing and dispensing of oral dosage forms of medicines to children: an observational study

INTRODUCTION

Irrational prescribing and dispensing of oral dosage forms of medicines to paediatric patients are major public health issues, especially in low-income and middle-income countries. Many challenges affect the rational use of oral dosage forms of medicines in children; these include a lack of dosage forms appropriate for the age and a lack of dose flexibility in dosage forms.

OBJECTIVES

To assess the rational prescribing and dispensing practices of oral dosage forms to children at dispensaries of the University of Gondar Comprehensive and Specialised Hospital (UoGCSH).

METHOD

A retrospective design for prescribing indicators and a cross-sectional study design to assess rational dispensing were used at the outpatient dispensary units of UoGCSH. A total of 931 oral dosage forms to assess prescribing indicators and 400 for dispensing indicators were used. The data were analysed using the Statistical Package for Social Sciences (SPSS V.26.0, IBM Corporation). Descriptive statistics were used to analyse indicators, and the χ2 test was used to compare indicators between dispensaries.

RESULT

Out of a total of 931 oral dosage forms for 700 prescriptions, 56.3% were solid oral dosage forms. An average number of oral dosage forms per child was 1.33±0.62. Only 150 (16.13%) (95% CI: 14% to 18.4%) were adequate for the weight of the child. The percentage of oral dosage forms not suitable for the age was 7.1% (66), (95% CI: 5.6% to 8.8%), and about 0.8% (95% CI: 0% to 1.8%) were adequately labelled. Drugs that needed manipulation before administering a single unit were 81 (39.7%), 95% CI: 33.7% to 47.1%.

CONCLUSION

The proportion of the prescribed medications that were adequate for the weight of the child was low, although the majority of prescriptions' weights were not recorded. Oral dosage forms not suitable for children were prescribed. The proportion of medications that needed manipulation before being administered as a single unit was high.

Quality attributes for printable emulsion gels and 3D-printed tablets: Towards production of personalized dosage forms

3D-printing technology offers a flexible manufacturing platform with the potential to address the need of personalized dosage forms. However, quality aspects of such small-scale, on-demand production of pharmaceutical products intended for personalization is still limited. The aim of this study was therefore to study critical quality control attributes of lipid tablets produced by semi-solid extrusion (SSE) 3D printing from emulsion gels incorporating a poorly water-soluble drug. Quality attributes for both the printable emulsion gel and the printed dosage forms were assessed. The emulsion gel was shown to be printable with accurate dosing for at least one month of storage at 4 °C. Tablets were 3D printed in different sizes and a correlation, R2 value of 0.99, was found between the weight and the drug content. The 3D-printed tablets complied with the mass and drug content uniformity requirements described in the European Pharmacopoeia.. Solid-state characterization of the tablets during short-term storage revealed no signs of crystallinity of the drug. Lastly, the lipid digestion and drug release were unchanged after short-term storage of the tablets. This study demonstrates the potential of SSE 3D printing for personalized dosing of a lipid-based formulation strategy and discusses central quality attributes for the printable formulation and the 3D-printed dosage form.

Adult Patients with Difficulty Swallowing Oral Dosage Forms: A Systematic Review of the Quantitative Literature

The aim of this systematic review was to identify and critically appraise the available evidence regarding solid oral dosage forms (SODFs), e.g., tablets, and challenges regarding the oral administration of medicine to inpatients in a variety of healthcare settings such as (1) hospitals, (2) nursing homes and (3) long-term stay units (LTSUs). A literature search was undertaken in September 2021 and repeated in June 2023 in the following databases: PubMed, EMBASE, CINAHL, Scopus, Web of Science, The Cochrane Library, PsycINFO and ProQuest. A Microsoft Excel® spreadsheet was devised to collate the following data from each eligible study: study author and year, country, number of participants, title, duration (follow-up period), study design, inclusion and exclusion criteria, method and data collection, relevant outcomes, and key findings. A total of 3023 records were identified, with 12 articles being included in the final systematic review. Seven of the twelve studies reported on the prevalence of difficulties swallowing SODFs, which varied from 10-34.2%. Nine of the twelve studies reported the methods used to manipulate SODFs, with the most reported method being tablet crushing. Given the prevalence of swallowing difficulties and the subsequent crushing of medicines in response to this, it is evident that concerns should be raised regarding the potential for a medication administration error to occur.

Small patients, big challenges: navigating pediatric drug manipulations to prevent medication errors - a comprehensive review

INTRODUCTION

Medication errors during drug manipulations in pediatric care pose significant challenges to patient safety and optimal medication management. Epidemiological studies have revealed a high prevalenceof medication errors throughout the medication process. Due to the lack of age-appropriate dosage forms, medication manipulation is common in pediatric drug administration. The consequences of these manipulations on drug efficacy and safety could be devastating, highlighting the need for evidence-based guidelines and standardized compounding practices.

AREAS COVERED

This review focuses on examining medication errors in pediatric care and delving into the manipulation of medicinal products.

EXPERT OPINION

The observed prevalence of medication errors and manipulations underscores the importance of addressing these issues to enhance patient safety and improve medication outcomes in pediatric care. Overall, the development of age-appropriate formulations and the dissemination of comprehensive clinical guidelines are essential steps toward improving medication safety and minimizing manipulations in pediatric healthcare settings.

In situ thermal image analysis of selective laser sintering for oral dosage form manufacturing

Additive Manufacturing (AM) is a fast-growing approach to produce personalized oral dosage forms. Even though some AM technologies are promising as alternative to conventional compounding with resulting dosage manipulation, they still suffer from a lack of quality control. Due to the high regulatory demands and standards applied to dosage forms in the case of dose accuracy and tablet properties such as friability, effective quality control is a key feature in promoting AM as a valid technology for patient-tailored medications. One of the AM techniques used is selective laser sintering, which allows for capturing the surface state layer-by-layer during the printing process. It provides the opportunity to apply non-destructive quality control based on image analysis extracting essential data at each layer of the sintering process. This work is devoted to establishing the value of data gathered via thermal image analysis for the subsequent quality control.

Evolution of pediatric pharmaceutical forms for treatment of Hansen's disease (leprosy)

INTRODUCTION

Leprosy is a neglected, infectious, granulomatous and chronic disease caused by the pathological agent Mycobacterium leprae. The course of the disease is more aggressive in patients under 15 years of age, but the current treatment offered worldwide consists of solid forms, by the combination of antibiotics such as rifampicin, clofazimine and dapsone. This represents results in lack of adherence in pediatric patients and drug therapy failure, although numerous formulations and technologies have already been developed.

AREA COVERED

This study aims to analyze the technological evolution of the pharmaceutical treatment of leprosy, aimed at children. A review of patents around the world was conducted to look for technical and clinical aspects of formulations and devices.

EXPERT OPINION

Innovative formulations for pediatric patients were classified according to the routes of administration as oral, inhalable, injectable and transdermal. The formulations were organized as alternatives for pediatric therapy, taking into account the physicochemical aspects of drugs and the physiological aspects of pediatric patients. Among the difficulties for the patented formulations to reach the market, of special note is the low stability of the physicochemical characteristics of the drugs. Optimization of formulations would favor the pediatric treatment of leprosy, aiming at therapeutic success.

Quality control evaluation of paediatric chocolate-based dosage forms: 3D printing vs mold-casting method

Pharmaceutical compounding is a core activity in the preparation of patient-specific dosage forms. In the current study we aimed to investigate whether 3D printing could be employed for the preparation of pediatric-friendly personalized dosage forms that fulfil the acceptance criteria specified in the pharmacopoeias for conventional dosage forms. We then compared the 3D printed dosage forms with the same formulations prepared with mold-casting, a method frequently applied during pharmaceutical compounding. The molded dosage forms failed to pass most of the quality control tests, including the mass uniformity and content uniformity tests, as well as dose accuracy, contrary to the 3D printed, which not only passed all tests but also enabled precision overdose adjustment. Hence, 3D printing of chocolate-based dosage forms may effectively serve as an acceptable alternative method to mold casting in compounding patient-specific medication at the point-of-care.

Development and evaluation of an assessment of the age-appropriateness/inappropriateness of formulations used in children

BACKGROUND

Medicines designed for adults may be inappropriate for use in children in terms of strength, dosage form and/or excipient content. There is currently no standardised method of assessing the age-appropriateness of a medicine for paediatric use.

AIM

To develop and test a tool to assess whether a dosage form (formulation) is appropriate for children and estimate the proportion of formulations considered 'inappropriate' in a cohort of hospitalised paediatric patients with a chronic illness.

METHOD

A multi-phase study: patient data collection, tool development, case assessments and tool validation. Inpatients aged 0-17 years at two UK paediatric/neonatal hospitals during data collection periods between January 2015 and March 2016. Written informed consent/assent was obtained. Medicines assessed were new or regularly prescribed to inpatients as part of their routine clinical care. All medicine administration episodes recorded were assessed using the Age-appropriate Formulation tool. The tool was developed by a consensus approach, as a one-page flowchart. Independent case assessments were evaluated in 2019.

RESULTS

In 427 eligible children; 2,199 medicine administration episodes were recorded. Two assessors reviewed 220 episodes in parallel: percentage exact agreement was found to be 91.7% (99/108) and 93.1% (95/102). In total, 259/2,199 (11.8%) medicine administration episodes involved a dosage form categorised as 'age-inappropriate'.

CONCLUSION

A novel tool has been developed and internally validated. The tool can identify which medicines would benefit from development of an improved paediatric formulation. It has shown high inter-rater reliability between users. External validation is needed to further assess the tool's utility in different settings.