Comparative study of Cd(II) and Cr(VI) biosorption on Staphylococcus xylosus and Pseudomonas sp. in single and binary mixtures

Removal of Heavy Metals by Pseudomonas sp. - Model Fitting and Interpretation

Industrial and urban modernization processes generate significant amounts of heavy metal wastewater, which brings great harm to human production and health. The biotechnology developed in recent years has gained increasing attention in the field of wastewater treatment due to its repeatable regeneration and lack of secondary pollutants. Pseudomonas, being among the several bacterial biosorbents, possesses notable benefits in the removal of heavy metals. These advantages encompass its extensive adsorption capacity, broad adaptability, capacity for biotransformation, potential for genetic engineering transformation, cost-effectiveness, and environmentally sustainable nature. The process of bacterial adsorption is a complex phenomenon involving several physical and chemical processes, including adsorption, ion exchange, and surface and contact phenomena. A comprehensive investigation of parameters is necessary in order to develop a mathematical model that effectively measures metal ion recovery and process performance. The aim of this study was to explore the latest advancements in high-tolerance Pseudomonas isolated from natural environments and evaluate its potential as a biological adsorbent. The study investigated the adsorption process of this bacterium, examining key factors such as strain type, contact time, initial metal concentration, and pH that influenced its effectiveness. By utilizing dynamic mathematical models, the research summarized the biosorption process, including adsorption kinetics, equilibrium, and thermodynamics. The findings indicated that Pseudomonas can effectively purify water contaminated with heavy metals and future research will aim to enhance its adsorption performance and expand its application scope for broader environmental purification purposes.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Bio-sorption capacity of cadmium and zinc by Pseudomonas monteilii with heavy-metal resistance isolated from the compost of pig manure

The tolerance of Pseudomonas monteilii X1, isolated from pig manure compost, to Cd and Zn, as well as its capacity for biosorption, were investigated. The minimum inhibitory concentrations (MIC) of Cd and Zn for the strain were 550 mg/L and 800 mg/L, respectively. Untargeted metabolomics analysis revealed that organic acids and derivatives, lipids and lipid-like molecules, and organic heterocyclic compounds were the main metabolites. The glyoxylate and dicarboxylate metabolism pathway were significantly enriched under Cd2+ stress. The isothermal adsorption and adsorption kinetics experiments determined that the strain had adsorption capacities of 9.96 mg/g for Cd2+ and 23.4 mg/g for Zn2+. Active groups, such as hydroxyl, carboxyl, and amino groups on the cell surface, were found to participate in metal adsorption. The strain was able to convert Zn2+ into Zn3(PO4)2·4H2O crystal. Overall, this study suggested that Pseudomonas monteilii has potential as a remediation material for heavy metals.

Microbial assisted multifaceted amelioration processes of heavy-metal remediation: a clean perspective toward sustainable and greener future

Rapidly increasing heavy metal waste has adversely affected the environment and the Earth's health. The lack of appropriate remediation technologies has worsened the issue globally, especially in developing countries. Heavy-metals contaminants have severely impacted the environment and led to devastating conditions owing to their abundance and reactivity. As they are nondegradable, the potential risk increases even at a low concentration. However, heavy-metal remediation has increased with the up-gradation of technologies and integration of new approaches. Also, of all the treatment methodologies, microbial-assisted multifaceted approach for ameliorating heavy metals is a promising strategy for propagating the idea of a green and sustainable environment with minimal waste aggregation. Microbial remediation combined with different biotechniques could aid in unraveling new methods for eradicating heavy metals. Thus, the present review focuses on various microbial remediation approaches and their affecting factors, enabling recapitulation of the interplay between heavy-metals ions and microorganisms. Additionally, heavy-metals remediation mechanisms adapted by microorganisms, the role of genetically modified (GM) microorganisms, life cycle assessment (LCA), techno-economic assessment (TEA) limitations, and prospects of microbial-assisted amelioration of heavy-metals have been elaborated in the current review with focus toward "sustainable and greener future."

Screening of cadmium-chromium-tolerant strains and synergistic remediation of heavy metal-contaminated soil using king grass combined with highly efficient microbial strains

The present study involved the isolation of two cadmium (Cd) and chromium (Cr) resistant strains, identified as Staphylococcus cohnii L1-N1 and Bacillus cereus CKN12, from heavy metal contaminated soils. S. cohnii L1-N1 exhibited a reduction of 24.4 % in Cr6+ and an adsorption rate of 6.43 % for Cd over a period of 5 days. These results were achieved under optimal conditions of pH (7.0), temperature (35 °C), shaking speed (200 rpm), and inoculum volume (8 %). B. cereus strain CKN12 exhibited complete reduction of Cr6+ within a span of 48 h, while it demonstrated a 57.3 % adsorption capacity for Cd over a period of 120 h. These results were achieved under conditions of optimal pH (8.0), temperature (40 °C), shaking speed (150 rpm), and inoculum volume (2-3 %). Additionally, microcharacterization and ICP-MS analysis revealed that Cr and Cd were accumulated on the cell surface, whereas Cr6+ was mainly reduced extracellularly. Subsequently, a series of pot experiments were conducted to provide evidence that the inclusion of S. cohnii L1-N1 or B. cereus CKN12 into the system resulted in a notable enhancement in both the plant height and biomass of king grass. In particular, it was observed that the presence of S. cohnii L1-N1 or B. cereus CKN12 in king grass led to a significant reduction in the levels of Cd and Cr in the soils (36.0 % and 27.8 %, or 72.9 % and 47.4 %, respectively). Thus, the results of this study indicate that the combined use of two bacterial strains can effectively aid in the remediation of tropical soils contaminated with moderate to light levels of Cd and Cr.

Removal of toxic metal Cd (II) by Serratia bozhouensis CdIW2 using in moving bed biofilm reactor (MBBR)

The use of bioreactor technology to treat industrial wastewater containing heavy metals has created new perspectives. Cadmium metal is one of the toxic heavy metals that have harmful effects on human health and the environment. This research work presents a comprehensive approach for aqueous cadmium removal through biosorption in a moving bed biofilm reactor (MBBR). The bacterium resistant to Cd(II) (350 mg/L) CdIW2 was selected among 8 cadmium tolerant bacteria isolated from the industrial wastewater of the metal industry. 16S rRNA gene and phenotypic analysis showed that the bacterium CdIW2 is similar to Serratia bozhouensis. The highest biosorption capacity of 65.79 mg/g was acquired in optimal conditions (30 min, pH = 6, 0.5 g/L, and 35 °C). The biosorption of the CdIW2 strain was consistent with the Langmuir isotherm and the pseudo-second order kinetic and showed the process's spontaneous thermodynamic and endothermic results. The removal rate 91.74% of MBBR in batch mode was obtained in 72 h and 10 mg/L of Cd(II). Furthermore, continuous mode bioreactor analysis has shown high efficiency at intel loading rates of 6-36 mg/L. day for cadmium removal. The second order kinetic (Grau) was chosen as the suitable model for modeling the MBBR process. Although several studies have evaluated the removal of various types of heavy metals, none of the studies involved the use of a metal-resistant strain in an MBBR bioreactor.

Sequestration of strontium, nickel, and cadmium on glomalin-related soil protein: Interfacial behaviors and ecological functions

Glomalin-related soil protein (GRSP) is a widespread recalcitrant soil protein complex that promotes the immobilization of metals in soils. Herein, we combined indoor simulation and field investigation to reveal the interfacial behaviors and ecological functions of GRSP to the three typical metals (Sr(II), Ni(II), and Cd(II)). The kinetic and isotherm data suggested that GRSP had a strong ability to adsorb the metals, which was closely related to the Hard-Soft-Acid-Base theory and the film diffusion mechanisms. Regarding environmental factors, the higher solution pH was beneficial to the adsorption of the metals onto GRSP, while the adsorption capacity decreased at lower or higher salinity due to the salting-out and Na⁺ competition effects. Moreover, Sr(II), Ni(II), and Cd(II) showed competitive adsorption onto GRSP, which was associated with the spatial site resistance effect. By comparing the retention factors of seven natural and artificial particles, GRSP had elevated distribution coefficients in high metal concentration, while its retention factors showed a relatively lower decrease, suggesting that GRSP had excellent buffer performance for a potential metal pollution emergency. Through the continental-scale coastal regions investigation, GRSP sequestered 1.05-3.11 μmol/g Ni, 0.31-1.49 μmol/g Sr, and 0.01-0.06 μmol/g Cd with 0.54-0.91 % of the sediment mass, demonstrating its strong ability to adsorb the metals. Therefore, we advocate that GRSP, as a recalcitrant protein complex, can be considered an effective tool for buffering capacity of metal pollution and environmental capacity within coastal wetlands.

Exopolymeric substances production by Bacillus cereus KMS3-1 enhanced its biosorption efficiency in removing Cd2+ and Pb2+ in single and binary metal mixtures

The present study investigated the growth, exopolymeric substance (EPS) production, and biosorption efficiency of strain Bacillus cereus KMS3-1 in the Cd²⁺ and Pb²⁺ ions containing single and binary metal-treated broth (50 mg/L). In addition, the interaction of the KMS3-1 strain with Cd²⁺ and Pb²⁺ ions in single and binary metal-treated broths was investigated using SEM-EDS, FTIR, and XRD analyses. The results showed that the biosorption efficiency (%) and EPS production of KMS3-1 biomass in both single and binary metal-treated broths had increased with increasing incubation time and were higher for Pb²⁺ ions than for Cd²⁺ ions. In the single and binary metal-treated broths, the maximum biosorption efficiency of KMS3-1 for Pb²⁺ ions were 70.8% and 46.3%, respectively, while for Cd²⁺ ions, they were 29.3% and 16.8%, respectively, after 72 h. Moreover, the biosorption efficiency of strain KMS3-1 for both metal ions was dependent on its EPS production and peaked at the maximum EPS production. The copious EPS production by KMS3-1 was observed in metal-treated media (50 mg/L), in the following order: Pb²⁺ ions (1925.7 μg/mL) > binary metal mixtures (1286.8 μg/mL) > Cd²⁺ ions (1185.5 μg/mL), > control (1099 μg/mL) after 72 h of incubation. This result indicates that the metal biosorption efficiency of the KMS3-1 strain was enhanced by the increased EPS production in the surrounding metal-treated broth. SEM-EDS and FTIR characterization studies revealed that the KMS3-1 biomass effectively adsorbed Cd²⁺ and Pb²⁺ ions from the medium by interacting with their surface functional groups (hydroxyl, carbonyl, carboxyl, amide, and phosphate). Moreover, the biosorbed Cd²⁺ and Pb²⁺ ions were transformed into CdS and PbS, respectively, by the KMS3-1 biomass. This study suggests that the Bacillus cereus KMS3-1 strain may be a promising candidate for the treatment of metal contamination.

Staphylococcus edaphicus KCB02A11 incorporated with natural adsorbents: first report on its tolerance and removal of hexavalent chromium [Cr(VI)]

Deteriorating the quality of different parts of the ecosystem due to toxic metals is a serious global issue. Hexavalent chromium is a metal that can cause adverse effects on all living beings, including plants, animals, and microorganisms, on exposure to high concentrations for prolonged periods. Removing hexavalent chromium from various types of wastes is challenging; hence the present study investigated the use of bacteria incorporated with selected natural substrates in removing hexavalent chromium from water. Isolated Staphylococcus edaphicus KCB02A11 has shown higher removal efficiency with a wide hexavalent chromium range (0.025-8.5 mg/L) within 96 h. Incorporating the isolated strain with natural substrates commonly found in the environment (hay and wood husk) showed high removal potential [100% removal with 8.5 mg/L of Cr(VI)], even within less than 72 h, with the formation of biofilms on the used substrates applied for metal removal on a large scale for prolonged periods. This study is the first report investigating hexavalent chromium tolerance and removal by Staphylococcus edaphicus KCB02A11.

Adsorption capacity of Penicillium amphipolaria XK11 for cadmium and antimony

Heavy metal pollution is a global problem that affects both the environment and human health. Microorganisms play an important role in remediation. Most studies on the use of microorganisms for heavy metal remediation focus on single heavy metals. In this study, a strain of Penicillium amphipolaria, XK11 with high resistance to both antimony (Sb III) and cadmium (Cd II) was screened from the mineral slag. The strain also had a high phosphate solubilization capacity. The single-factor adsorption experiment results showed that the initial pH (pH₀), adsorption time (T), and initial solution concentration (C₀) all affected the adsorption of Sb and Cd by XK11. When the initial pH₀ (Cd = 6, Sb = 4) and adsorption time (T = 7 d) were constant, XK11 achieved the maximum removal rate of Cd (45.6%) and Sb (34.6%). These results confirm that XK11 has potential as a biomaterial or remediation of Sb and Cd pollution.

A Comprehensive Review of the Current Progress of Chromium Removal Methods from Aqueous Solution

Chromium (Cr) exists in aqueous solution as trivalent (Cr³⁺) and hexavalent (Cr⁶⁺) forms. Cr³⁺ is an essential trace element while Cr⁶⁺ is a dangerous and carcinogenic element, which is of great concern globally due to its extensive applications in various industrial processes such as textiles, manufacturing of inks, dyes, paints, and pigments, electroplating, stainless steel, leather, tanning, and wood preservation, among others. Cr³⁺ in wastewater can be transformed into Cr⁶⁺ when it enters the environment. Therefore, research on Cr remediation from water has attracted much attention recently. A number of methods such as adsorption, electrochemical treatment, physico-chemical methods, biological removal, and membrane filtration have been devised for efficient Cr removal from water. This review comprehensively demonstrated the Cr removal technologies in the literature to date. The advantages and disadvantages of Cr removal methods were also described. Future research directions are suggested and provide the application of adsorbents for Cr removal from waters.

Pb0 flue gas biosorption in denitrifying MBfR: Characteristics and binding ability of extracellular polymeric substances

Pb⁰ in flue gas which is ubiquitous in the environment, poses a certain threat to human and ecology, but the study on EPS-dependent stabilization of lead to remove Pb⁰ from flue gas remains insufficient. In this investigation, the characteristics and heavy metals-binding ability of four EPS fractions were evaluated. The EPS were extracted from denitrifying membrane biofilm reactor (MBfR) and divided into slime EPS (S-EPS), loosely-bound EPS (LB-EPS), tightly-bound EPS (TB-EPS) and EPS in circulating flow (Y-EPS). The S, LB, TB-EPS related to Pb stabilization on biofilm need more attention. Compared to Pb-S-EPS (0.013 mg g^-1) and Pb-LB-EPS (0.13 mg g^-1), the Pb-TB-EPS (0.26 mg g^-1) was mainly stable form of vapor Pb⁰, since TB-EPS's higher content (30.67-82.44 mg g^-1 VSS), proteins (13.47-36.32 mg g^-1 VSS) and polysaccharides (9.37-32.48 mg g^-1 VSS) concentration. Particularly, proteins related ligands were more effective in S, LB, TB-EPS dependent adsorption of Pb, complexing with hydrophobic acid ligands further strengthened in TB-EPS adsorption. The Pb-EPS complex formed via binding with functional groups (such as O-H, N-H, C-H and CC) on EPS, also facilitated by loose structure of proteins. This study enlightens the researchers on the bio-treatment and EPS-dependent biosorption of Pb⁰ in flue gas in denitrifying MBfR.

High Adsorption of Hazardous Cr(VI) from Water Using a Biofilter Composed of Native Pseudomonas koreensis on Alginate Beads

Most conventional methods to remove heavy metals from water are efficient for high concentrations, but they are expensive, produce secondary pollution, and cannot remove low concentrations. This paper proposes a biological system to remove Cr(VI) from aqueous solutions; the biofilter is composed of a native Pseudomonas koreensis immobilized in calcium alginate beads. Lab experiments were conducted in batch reactors, considering different operating conditions: Cr(VI) concentration, temperature, pH, and time. At 30 °C and a pH of 6.6, the immobilized bacteria achieved their optimal adsorption capacity. In the chromium adsorption system, saturation was reached at 30 h with a qmax = 625 mg g-1. By adjusting the experimental data to the Langmuir and Freundlich models, it is suggested that P. koreensis forms a biofilm with a homogeneous surface where Cr(VI) is adsorbed and that the bacteria also incorporates the metal in its metabolism, leading to a multilayer adsorption. On the other hand, using Fourier transform infrared spectroscopy, it was inferred that the functional groups involved in the adsorption process were O-H and C=O, which are a part of the P. koreensis cell wall.

Two low-toxic Klebsiella pneumoniae strains from gut of black soldier fly Hermetia illucens are multi-resistance to sulfonamides and cadmium

In recent years, pollution of antibiotics and heavy metal has often been reported in organic wastes. Saprophytic insects have been recorded as biological control agents in organic waste management. During organic waste conversion, the intestinal bacteria of the saprophytic insects play an important role in digestion, physiology, immunity and prevention of pathogen colonization. Black soldier fly (BSF) Hermetia illucens has been widely used as saprophytic insects and showed tolerance to sulfonamides (SAs) and cadmium (Cd). Diversity and changes in gut microbiota of black soldier fly larvae (BSFL) were evaluated through 16S rRNA high-throughput sequencing, and a decrease in diversity of gut microbiota along with an increase in SAs stress was recorded. Major members identified were Actinomycetaceae, Enterobacteriaceae, and Enterococcaceae. And fourteen multi-resistance Klebsiella pneumoniae strains were isolated. Two strains BSFL7-B-5 (from middle midgut of 7-day BSFL) and BSFL11-C-1 (from posterior midgut of 11-day BSFL) were found to be low-toxic and multi-resistance. The adsorption rate of SAs in 5 mg/kg solutions by these two strains reached 65.2% and 61.6%, respectively. Adsorption rate of Cd in 20 mg/L solutions was 77.2% for BSFL7-B-5. The strain BSFL11-C-1 showed higher than 70% adsorption rates of Cd in 20, 30 and 40 mg/L solutions. This study revealed that the presence of multi-resistance bacterial strains in the gut of BSFL helped the larvae against SAs or Cd stress. After determining how and where they are used, selected BSFL gut bacterial strains might be utilized in managing SAs or Cd contamination at suitable concentrations in the future.

Bioreduction and bioremoval of hexavalent chromium by genetically engineered strains (Escherichia coli MT2A and Escherichia coli MT3)

The number of studies on the removal of hazardous metals from water using genetic engineering technologies is growing. A high rate of metal ion removal from the environment is ensured, particularly through the expression of cysteine and thiol-rich proteins such as metallothioneins in bacterial cells. In this study, we used recombinant strains created by cloning the human metallothioneins MT2A and MT3 into Escherichia coli Jm109 to assess the removal and reduction of hexavalent chromium (Cr(VI)) from aqueous solutions. MT2A was the most effective strain in both Cr(VI) removal (89% in 25 mg/L Cr(VI)) and Cr(VI) reduction (76% in 25 mg/L Cr(VI)). The amount of Cr adsorbed per dry cell by the MT2A strain was 22 mg/g. The biosorption of total Cr was consistent with the Langmuir isotherm model. Scanning electron microscope (SEM) images revealed that the morphological structures of Cr(VI)-treated cells were significantly damaged when compared to control cells. Scanning transmission electron microscope (STEM) images showed black spots in the cytoplasm of cells treated with Cr(VI). Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the cells treated with Cr(VI) showed that the groups interacting with Cr were hydroxyl, amine, amide I, amide II, phosphoryl and carbonyl. When all of the experimental data was combined, it was determined that both MT2A and MT3 were effective in removing Cr(VI) from aqueous solutions, but MT2A was more effective, indicating that MT2A may be employed as a biotechnological tool.

Clean approach for chromium removal in aqueous environments and role of nanomaterials in bioremediation: Present research and future perspective

Chromium is an insidious ecological pollutant that is of huge value for its toxicity. The existing ecological objective to lower the heights of toxic materials in marine systems and to stimulate the existing water to recycle after suitable treatment of wastewater. Chromium is a hazard element that appears in discharges of numerous industries that must be diminished to accomplish the goals. Nearly all of the findings described in the literature related to the usage of various materials such as fungal, algal, bacterial biomass, and nanomaterials for chromium adsorption. The current work evaluates the findings of research commenced in the preceding on the use of a variety of adsorbents to decrease chromium concentrations in contaminated waters. This review article focuses on the issue of chromium contamination, its chemistry, causes, consequences, biological agent remediation techniques, and the detailed process of chromium detoxification in microbial cells. It also lists a description of the in situ and ex situ chromium bioremediation methods used. This can help design more effective Cr(VI) removal methods, thus bridging the difference between laboratory discoveries and industrial chromium remediation applications.

Recent advances in bacterial biosensing and bioremediation of cadmium pollution: a mini-review

Cadmium (Cd) pollution has become a global environmental issue because Cd gets easily accumulated and translocated in the food chain, threatening human health. Considering the detrimental effects and non-biodegradability of environmental Cd, this is an urgent issue that needs to be addressed through the development of robust, cost-effective, and eco-friendly green routes for monitoring and remediating toxic levels of Cd. This article attempts to review various bacterial approaches toward biosensing and bioremediation of Cd in the environment. This review focuses on the recent development of bacterial cell-based biosensors for the detection of bioavailable Cd and the bioremediation of toxic Cd by natural or genetically-engineered bacteria. The present limitations and future perspectives of these available bacterial approaches are outlined. New trends for integrating synthetic biology and metabolic engineering into the design of bacterial biosensors and bioadsorbers are additionally highlighted.

Cadmium-tolerant bacteria: current trends and applications in agriculture

Cadmium (Cd) is considered a toxic heavy metal; nevertheless, its toxicity fluctuates for different organisms. Cadmium-tolerant bacteria (CdtB) are diverse and non-phylogenetically related. Because of their ecological importance these bacteria become particularly relevant when pollution occurs and where human health is impacted. The aim of this review is to show the significance, culturable diversity, metabolic detoxification mechanisms of CdtB and their current uses in several bioremediation processes applied to agricultural soils. Further discussion addressed the technological devices and the possible advantages of genetically modified CdtB for diagnostic purposes in the future.

Highly Efficient Removal of Cu(II) Ions from Acidic Aqueous Solution Using ZnO Nanoparticles as Nano-Adsorbents

Water pollution by heavy metals has significant effects on aquatic ecosystems. Copper is one of the heavy metals that can cause environmental pollution and toxic effects in natural waters. This encourages the development of better technological alternatives for the removal of this pollutant. This work explores the application of ZnO nanoparticles (ZnO-NPs) for the removal of Cu(II) ions from acidic waters. ZnO NPs were characterized and adsorption experiments were performed under different acidic pHs to evaluate the removal of Cu(II) ions with ZnO NPs. The ZnO NPs were chemically stable under acidic conditions. The adsorption capacity of ZnO NPs for Cu(II) was up to 47.5 and 40.2 mg·g−1 at pH 4.8 and pH 4.0, respectively. The results revealed that qmax (47.5 mg·g−1) and maximum removal efficiency of Cu(II) (98.4%) are achieved at pH = 4.8. In addition, the surface roughness of ZnO NPs decreases approximately 70% after adsorption of Cu(II) at pH 4. The Cu(II) adsorption behavior was more adequately explained by Temkin isotherm model. Additionally, adsorption kinetics were efficiently explained with the pseudo-second-order kinetic model. These results show that ZnO NPs can be an efficient alternative for the removal of Cu(II) from acidic waters and the adsorption process was more efficient under pH = 4.8. This study provides new information about the potential application of ZnO NPs as an effective adsorbent for the remediation and treatment of acidic waters contaminated with Cu(II).

Cadmium Bioremediation Potential of Bacillus sp. and Cupriavidus sp

Heavy metals are extremely toxic and their presence in the environment is a known risk factor. Out of them, cadmium is known for its fatal effects on the environment, humans and soil. Bioremediation offers an economical solution for detoxifying such metals. So, the present study aimed to isolate Bacillus sp. and Cupriavidus sp. from the cadmium contaminated soils and studied their cadmium bioremediation potential. Strains that have exhibited good tolerance upto 1000 ppm and 1500 ppm of cadmium concentration and good absorption to cadmium were studied by scanning electron microscopy. An increase in the size of the bacterial cells was observed. The absorption of cadmium by bacterial cells was further confirmed by atomic absorption spectroscopy and found that the sorption rate of Bacillus sp. ECd004 was 87% and of Cupriavidus sp. SCd005 was 90%. Furthermore, these strains were exposed to cadmium contaminated soil in the form of bioformulations and their role in the rate of seed germination of Vigna radiata and Cicer aertinum and impact on seedlings growth was determined. Seed germination and growth rate was found to be double in comparison to the negative control. This investigation proves their efficacy to use in highly cadmium contaminated soils making them a suitable choice for bioremediation.

Characterization of cadmium biosorption by inactive biomass of two cadmium-tolerant endophytic bacteria Microbacterium sp. D2-2 and Bacillus sp. C9-3

In this study, two cadmium-tolerant endophytic bacteria (Microbacterium sp. D2-2 and Bacillus sp. C9-3) were employed as biosorbents to remove Cd(II) from aqueous solutions. The influence of initial pH, initial Cd(II) concentration, adsorbent biomass, temperature and contact time on Cd(II) removal were investigated. Results showed that the Langmuir isotherms were found to best fit the equilibrium data, and the maximum biosorption capacities were found to be 222.22 and 163.93 mg/g at a solution pH of 5.0 for Microbacterium sp. D2-2 and Bacillus sp. C9-3, respectively. The biosorption kinetics followed well pseudo-second-order kinetics. Fourier transform infrared spectroscopic analysis suggested that the hydroxyl, carboxyl, carbonyl and amino groups on Microbacterium sp. D2-2 and Bacillus sp. C9-3 biomass were the main binding sites for Cd(II). The results presented in this study showed that Microbacterium sp. D2-2 and Bacillus sp. C9-3 are potential and promising adsorbents for the effective removal of Cd(II) from aqueous solutions.

Microbial Mechanisms for Remediation of Hexavalent Chromium and their Large-Scale Applications; Current Research and Future Directions

The increase of anthropogenic activities has led to the pollution of the environment by heavy metals, including chromium (Cr). There are two common oxidative states of Cr that can be found in industrial effluents the trivalent chromium Cr(III) and the hexavalent chromium Cr(VI). While the hexavalent chromium Cr(VI) is highly toxic and can trigger serious human health issues, its reduced form, the trivalent chromium Cr(III), is less toxic and insoluble. Leather tanning is an important industry in many developing countries and serves as a major source of Cr(VI) contamination. Globally, tannery factories generate approximately 40 million m3 of Cr-containing wastewater annually. While the physico-chemical treatments of tannery wastewater are not safe, produce toxic chemicals and require large amounts of chemical inputs, bioremediation using chromium-resistant bacteria (CRB) is safer, efficient and does not produce toxic intermediates. Chromium-resistant bacteria (CRB) utilise three mechanisms for Cr(VI) removal: biotransformation, biosorption and bioaccumulation. This review will evaluate the three Cr(VI) detoxification mechanisms used by bacteria, their limitations and assess their applications for large-scale remediation of Cr(VI). This can be helpful for understanding the nature of Cr(VI) remediation mechanisms used by bacteria, therefore, bridging the gap between laboratory findings and industrial application of microorganisms for Cr(VI) removal.

Biomanagement of hexavalent chromium: Current trends and promising perspectives

Chromium (Cr) is most widely used heavy metal with vast applications in industrial sectors such as metallurgy, automobile, leather, electroplating, etc. Subsequently, these industries discharge large volumes of toxic Cr containing industrial wastewaters without proper treatment/management into the environment, causing severe damage to human health and ecology. This review gives some novel insights on the existing, successful and promising bio-based approaches for Cr remediation. In lieu of the multiple limitations of the physical and chemical methods for remediation, various biological means have been deciphered, wherein dead and live biomass have shown immense capabilities of removing/reducing and/or remediating Cr from polluted environmental niches. Adsorption of Cr by various agro-based waste and reduction/precipitation by different microbial groups have shown promising results in chromium removal/recovery. Various microbial based agents and aquatic plants like duckweeds are emerging as efficient adsorbents of metals and their role in chromium bioremediation is an effective green technology that needs to be harnessed effectively. The role of iron and sulphur reducing bacteria have shown potential for enhanced Cr remediation. Biosurfactants have revealed immense scope as enhancers of microbial metal bioremediation and have been reported to have potential for use in chromium recovery as well. The authors also explore the combined use of biochar and biosurfactants as a potential strategy for chromium bioremediation for the development of technology worth adopting. Cr is non-renewable and finite resource, therefore its safe removal/recovery from wastes is of major significance for achieving social, economic and environmental sustainability.

Bioreduction of hexavalent chromium on goethite in the presence of Pseudomonas aeruginosa

The effective mineral absorption and bioreduction were considered as two preferred processes to alleviate the bioavailability and toxicity of toxic trace metals. In this study, the bioreduction of hexavalent chromium (Cr(VI)) on goethite (FeOOH) in the presence of Pseudomonas aeruginosa (P. aeruginosa) was investigated with different environmental factors, including carbon source concentrations, pH, temperature and initial Cr(VI) concentrations. The characterization of FeOOH-P. aeruginosa indicated that P. aeruginosa was surrounded by FeOOH, which could provide the essential iron for bacterial growth and reduce Cr(VI) to Cr(III). The optimal experimental conditions for Cr(VI) (initial concentration: 35 mg L^-1) absorption (∼46%) and bioreduction (∼54%) involved a temperature of 45 °C and pH of 5.5. Meanwhile, extracellular polymeric substances (EPS) secreted by P. aeruginosa and its functional groups played important roles in the reduction of Cr(VI). They could reduce Cr(VI) to Cr(III) and transform to Cr(OH)₃ or Fe_x-Cr_(1-x)(OH)₃ precipitation. These results of this study are of significant importance to better understand the environmental geochemical behavior of Cr(VI) with the interactions between soil minerals and microorganisms.

Modified Vermiculite as Adsorbent of Hexavalent Chromium in Aqueous Solution

The aim of this study was to investigate the efficiency of removing Cr6+ from aqueous solutions using two exfoliated vermiculite: (1) heated abruptly at 1000 °C and (2) irradiated with microwave radiation. The effects investigated were contact time, adsorbate concentration and initial Cr6+ concentration. The adsorption with both exfoliated vermiculites was well described by the DKR isotherm, indicative of a cooperative process and with the pseudo second order kinetic model. The Kd value for the two exfoliated vermiculites was similar, 0.2 ·1010 μg/Kg. The maximum adsorption capacity of Cr6+ with thermo-exfoliated vermiculite, 2.81 mol/g, was much higher than with microwave irradiated vermiculite, 0.001 mol/g; both values were obtained with 0.5 g of vermiculite in contact with distilled water enriched with 1 ppm of Cr6+ for 24 h. Factors such as ion chemistry, the solution pH and ionic strength, influence the values of capacity, adsorption energy and initial adsorption rate values of the exfoliated vermiculite. In addition, these values depended on the exfoliation process, being the adsorption capacity highest with abrupt heating of vermiculite, while the adsorption energy and rate values showed just a slight increase with microwave irradiation. This aspect is important to select the most suitable vermiculite modification treatment to use it as an adsorbent.

Current advancement and future prospect of biosorbents for bioremediation

The increasing use of heavy metals, synthetic dyes and pesticides is a major environmental concern. Wastewaters containing heavy metals and dyes, extensively released from small and large scale industries enter excessively into food chains resulting in mutagenesis, carcinogenicity and serious health impairments in living systems. The arrays of technologies are implemented to date to remediate both inorganic and organic contaminants from wastewaters. Among which, adsorption is the most attractive method as it employs eco-friendly, sustainable and cost-effective biomaterials. Use of bioadsorbents is advantageous over the conventional adsorbents. Clay, chitin, peat, microbial biomass and agricultural wastes are commonly used bioadsorbants. These bioadsorbents are extensively used for elimination of dyes, heavy metals, adsorption of toxic industrial effluents, removal of fertilizers/pesticides, atmospheric pollutants and nuclear waste from the environment. The current review presents state of the art knowledge on various types of biosorbents, their uses, and mechanism of action. Various strategies to enhance the efficiency of bioadsorbents and physicochemical conditions to remediate dyes and heavy metals from waste streams are also incorporated in this review. Use of nano-bioadsorbents in industries to minimize the hazardous effect of solid and liquid waste has also been discussed.

Simultaneous cleanup of Reactive Black 5 and cadmium by a desert soil bacterium

Multi-contaminated industrial wastewaters pose serious environmental risks due to high toxicity and non-biodegradability. The work reported here evaluated the ability of Pseudomonas aeruginosa strain Gb30 isolated from desert soil to simultaneously remove cadmium (Cd) and Reactive Black 5 (RB5), both common contaminants in various industrial effluents. The strain was able to grow normally and decolorize 50 mg L^-1 RB5 within 24 h of incubation in the presence of 0.629 m mol L^-1 of Cd²⁺. In order to evaluate strain performance in RB5 detoxification, a cytotoxicity test using Human Embryonic Kidney cells (HEK293) was used. Cadmium removal from culture media was determined using atomic adsorption. Even in presence of (0.115 + 0.157 + 0.401 + 0.381) m mol L^-1, respectively, of Cr⁶⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in the growth medium, strain Gb30 successfully removed 35% of RB5 and 44%, 36%, 59% and 97%, respectively, of introduced Zn²⁺, Cu²⁺, Cr⁶⁺ and Cd²⁺, simultaneously. In order to understand the mechanism of Cd removal used by P. aeruginosa strain Gb30, biosorption and bioaccumulation abilities were examined. The strain was preferentially biosorbing Cd on the cell surface, as opposed to intracellular bioaccumulation. Microscopic investigations using AFM, SEM and FTIR analysis of the bacterial biomass confirmed the presence of various structural features, which enabled the strain to interact with metal ions. The study suggests that Pseudomonas aeruginosa Gb30 is a potential candidate for bioremediation of textile effluents in the presence of complex dye-metal contamination.

A comprehensive study on the bacterial biosorption of heavy metals: materials, performances, mechanisms, and mathematical modellings

Discharges of waste containing heavy metals (HMs) have been a challenging problem for years because of their adverse effects in the environment. This article provides a comprehensive review of recent findings on bacterial biosorption and their performances for sequestration of HMs. It highlights the significance of HM removal and presents a brief overview on bacterial functionality and biosorption technology. It also discusses the achievements towards utilisation of bacterial biomass with biosorption of HMs from aqueous solutions. This article includes different types of kinetic, equilibrium, and thermodynamic models used for HM treatments using different bacterial species, as well as biosorption mechanisms along with desorption of metal ions and regeneration of bacterial biosorbents. Its fast kinetics of metal biosorption and desorption, low operational cost, and no production of toxic by-products provide attraction to many researchers. Bacteria can easily be produced using inexpensive growth media or obtained as a by-product from industries. A systematic comparison of the literature for a metal-binding capacity of bacterial biomass under different conditions is provided here. The properties of the cell wall constituents such as peptidoglycan and the role of functional groups for metal sorption are presented on the basis of their biosorption potential. Many bacterial biosorbents as reported in scientific literature have a high biosorption capacity, where some are better than commercial adsorbents. Based on the reported results, it seems that most bacteria have the potential for industrial applications for detoxification of HMs.

Walli H, D’asheesh TA, Jaber Shinjar F, Ali Abdulameer M. Chromium Bioremoval by Staphylococcus sp. and Pseudomonas sp. Isolated from Industrial Waste Water in Baghdad, Iraq

Five samples were accrued beside the wastewater of State Electrical Manufacturing Company between Baghdad/Iraq, as much triplicates. Biological absorption can remain an high quality approach because treating severe humor wastewater beside chromium produced by using humus then manufactured activities. Many bacteria Gram-positive & Gram-negative have the ability after remove chromium and as a result redact guilty water free. In this study, the chromium biosorption the usage of single and blended subculture concerning microorganism reduced such as like Staphylococcus sp. and Pseudomonas sp. The parameters used to be measured on biosorption regarding chromium; certain as much time, pH, temperature have been examined. This study indicates so 28.5% beyond biosorbent aggregate beyond chromium combined cultures on Pseudomonas sp. hold been celebrated or Staphylococcus sp, 10.4% & 13.5% biosorption because single cultures respectively. The age in imitation of achieve most adsorption about chromium was 159 mg/l then 24 hours because mixed isolates from Pseudomonas sp. And Staphylococci. The most advantageous biomass awareness was once 0.5 mg/ml for mixed isolates, Pseudomonas sp. and Staphylococci. PH 5 used to be found according to be optimized because all ternary biomass (two unaccompanied isolates; one combined isolation) because of chromium biosorption. The most beneficial temperature was once 50 ° C because whole three structures ancient into the present work.

Biotransformation of chromium by root nodule bacteria Sinorhizobium sp. SAR1

The present study aims to address the problem of chromium (Cr) toxicity by providing important insights into the mechanisms involved in its bioremediation. Among the 22 Rhizobium and Sinorhizobium isolates obtained from Sesbania sesban root nodules, Sinorhizobium sp. SAR1 (JX174035.1) tolerated the maximum Cr concentration (1mM) and hence was used for further studies. The excess secretion of extra polymeric substances, as seen from scanning electron micrographs, could be a probable mechanism of adaptation to the Cr stress. The Energy dispersive X-ray spectroscopy data did not show any peaks of Cr. The biosorption studies done on the isolate gave maximum adsorption capacity as 285.71mg/g. The isotherm studies showed a better fit to Langmuir isotherm. The Weber and Morris plot established that the phenomenon of adsorption was governed by film diffusion mechanism. The FTIR analysis suggested the role of cell wall components and extracellular polymeric substances in Cr adsorption to the biomass of Sinorhizobium. On the basis of these results a compiled mechanism of Cr (VI) adsorption and its biotransformation into Cr (III) by Sinorhizobium sp. SAR1 is explained. This work outlines a comprehensive detail for the exact phenomenon of Cr biotransformation by Sinorhizobium sp. SAR1. These results may further help in developing and enhancing effective bioremediation approaches.

Multimetal tolerance mechanisms in bacteria: The resistance strategies acquired by bacteria that can be exploited to 'clean-up' heavy metal contaminants from water

Heavy metal pollution is one of the major environmental concerns worldwide. Toxic heavy metals when untreated get accumulated in environment and can pose severe threats to living organisms. It is well known that metals play a major role either directly or indirectly in different metabolic processes of bacteria. This allows bacterial cells to grow even in the presence of some toxic heavy metals. Microbial biotechnology has thus emerged as an effective and eco friendly solution in recent years for bioremediation of heavy metals. Therefore, this review is focused on summarising bacterial adaptation mechanisms for various heavy metals. It also shares some applications of have metal tolerant bacteria in bioremediation. Bacteria have evolved a number of processes for heavy metal tolerance viz., transportation across cell membrane, accumulation on cell wall, intra as well as extracellular entrapment, formation of complexes and redox reactions which form the basis of different bioremediation strategies. The genetic determinants for most of these resistances are located on plasmids however some may be chromosomal as well. Bacterial cells can uptake heavy by both ATP dependent and ATP independent processes. Bacterial cell wall also plays a very important role in accumulating heavy metals by bacterial cells. Gram-positive bacteria accumulate much higher concentrations of heavy metals on their cell walls than that of metals gram -ve bacteria. The role of bacterial metallothioneins (MTs) in heavy metal has also been reported. Thus, heavy metal tolerant bacteria are important for bioremediation of heavy metal pollutants from areas containing high concentrations of particular heavy metals.

Biosorption technology for removal of toxic metals: a review of commercial biosorbents and patents

In last decades, the biosorption process has become one of the main alternative treatment technologies for the removal of pollutants from dilute aqueous solution. Among these pollutants, toxic metals have drawn attention due to their negative effects in human body and food chain. Even though biosorption is considered a cost-effective and eco-friendly technology to remove toxic metals from dilute wastewaters, there are still obstacles that restrain its commercialization. For this reason, various scientific articles and patents have been published each year to make more effective and economical this technology. This review reports an overview of past achievements, current research of biosorption studies, and future trends for the development of the biosorption as sustainable cleaner technology. Mechanisms of metal uptake, recovery and biosorbent regeneration, process design, commercial application of biosorbents, and patents registered are presented. Finally, future aspects in biosorption research and suggestions for its application will be discussed.

Sorption mechanism and distribution of cadmium by different microbial species

Bioremediation programs of cadmium (Cd) by microorganisms have being proposed, but the underlying mechanism of the remediation ion remains unexplored. Here, the sorption efficiency and subcellular fraction distribution of Cd in three selected microbial species were investigated. Our results showed that both species of the microorganisms and initial Cd concentrations strongly affected the Cd sorption capacity. In the three microbial species, the Cd removal efficiency increased with decreased Cd concentrations. Specifically, Hansenula anomala removed the highest Cd ions in low concentration of 0.05 mg L^-1; while in medium concentration of 0.5 mg L^-1 and high concentration of 5 mg L^-1, Bacillus subtilis removed the highest Cd ions. The subcellular fractionation allocation showed that Cd was mainly allocated on cell wall (mantle and inner wall) in Pseudomonas stutzeri and B. subtilis, while cell cytomembrane accumulated similar amount of Cd compared to the cell wall of H. anomala at concentration of 0.5 mg L^-1. Meanwhile, the Cd distributions on cell subcellular fractionation of the three species changed along the contact times, suggesting varied migration models during the biosorption process. Moreover, the functional groups involved in biosorption differed among the species based on Fourier Transform Infrared (FTIR) analysis. Our results have important implications for developing and improving Cd remediation by microorganisms, which is a low-cost and environmentally friendly bioremediation strategy of Cd pollution in environments.

Fabrication of Porous Hydroxyapatite Granules as an Effective Adsorbent for the Removal of Aqueous Pb(II) Ions

Porous hydroxyapatite (HAp) granules have been successfully fabricated from a HAp powder precursor and polyvinyl alcohol (PVA) additive by a simple sintering process. The composition and microstructures of the HAp were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer. The effects of sintering temperature and PVA/HAp mass ratios on color, water stability, morphology, and chemical composition of HAp are discussed. Optimum conditions for the fabrication of HAp granules were found to be a PVA/HAp mass ratio of 3/20 and a sintering temperature of 600°C for 4 h. Accordingly, the obtained HAp is white in color, is in the granular form with a size of about 2 × 10 mm, and has a specific surface area of 70.6 m2/g. The adsorption of Pb2+ onto the as-prepared HAp granules was carried out in aqueous solution by varying the pH, the adsorbent dose, the initial concentration of Pb2+, and the contact time. The results of adsorption stoichiometry of Pb2+ on the HAp granule adsorbent were fitted to the Langmuir adsorption isotherm model (R2 = 0.99). The adsorption capacity and removal efficiency of the HAp granule adsorbent for Pb2+ under optimal conditions were found to be 7.99 mg/g and 95.92%, respectively. The adsorption process obeyed a pseudo-second-order kinetic model with R2∼1. The porous HAp granules studied in this work showed potential for the removal of Pb2+ from industrial wastewater.

Arsenic biosorption using pretreated biomass of psychrotolerant Yersinia sp. strain SOM-12D3 isolated from Svalbard, Arctic

A Gram-negative, arsenite-resistant psychrotolerant bacterial strain, Yersinia sp. strain SOM-12D3, was isolated from a biofilm sample collected from a lake at Svalbard in the Arctic area. To our knowledge, this is the first study on the ability of acid-treated and untreated, non-living biomass of strain SOM-12D3 to absorb arsenic. We conducted batch experiments at pH 7, with an initial As(III) concentration of 6.5 ppm, at 30 °C with 80 min of contact time. The Langmuir isotherm model fitted the equilibrium data better than Freundlich, and the sorption kinetics of As(III) biosorption followed the pseudo-second-order rate equation well for both types of non-living biomass. The highest biosorption capacity of the acid-treated biomass obtained by the Langmuir model was 159 mg/g. Further, a high recovery efficiency of 96% for As(III) was achieved using 0.1 M HCl within four cycles, which indicated high adsorption/desorption. Fourier transformed infrared (FTIR) demonstrated the involvement of hydroxyl, amide, and amine groups in As(III) biosorption. Field emission scanning electron microscopy-energy dispersive analysis (FESEM-EDAX) indicated the different morphological changes occurring in the cell after acid treatment and arsenic biosorption. Our results highlight the potential of using acid-treated non-living biomass of the psychrotolerant bacterium, Yersinia sp. Strain SOM-12D3 as a new biosorbent to remove As(III) from contaminated waters.

Improved biodegradability of hardly-decomposable wastewaters from petrochemical industry through photo-Fenton method and determination of optimum operational conditions by response surface methodology

BACKGROUND

Petrochemical wastewaters are highly polluting due to having various destructive materials such as aromatic hydrocarbons and heavy metal ions. Therefore, they need to be treated before disposal to the environment. However, due to low biodegradability, applying common treatment methods such as activated sludge is not feasible for these wastewaters.

METHODS

Photo-Fenton is an advanced oxidation process which was applied to promote the biodegradability of hardly-decomposable petrochemical wastewaters. The wastewater samples were provided by Maroon and Karoon petrochemical plants, located in Mahshahr, Iran. To design the experiments and analyze the experimental results, response surface method with four variables (input COD and TDS concentrations and injected a dosage of H2O2 and Fe2+) and four fixed parameters (temperature, pH, retention time, and UV power) were used.

RESULTS

The ranges of input COD, H2O2, Fe2+ and TDS were 1000 to 2500 mg L- 1, 1000 to 4000 mg L- 1, 500 to 3000 mg L- 1, and 4500 to 11,500 mg L- 1, respectively. Average input BOD5/COD ratio was 0.09. These ranges and values were determined according to the quality of the raw wastewater and experimental design. Output BOD5/COD ratio was varying between 0.3 and 0.6, which declined with an increase of input COD. The results showed that the biodegradability of the industrial wastewater was promoted upon application of higher H2O2 and Fe2+ concentrations. Meanwhile, TDS concentration had no significant effect on biodegradability of this wastewater. The following optimum conditions were resulted by evaluating the maximum efficiency of the reactor in enhancing the biodegradability of the wastewater: 1000 mg L- 1 input COD, 2668 mg L- 1 H2O2, 1655 mg L- 1 Fe2+, 8000 mg L- 1 TDS, 0.6 output BOD5/COD, 852 mg L- 1 output BOD5 and 939 mg L- 1 output COD.

CONCLUSION

Photo-Fenton method is highly efficient for increasing the biodegradability of petrochemical wastewaters before applying biological wastewater treatment.

Two combined mechanisms responsible to hexavalent chromium removal on active anaerobic granular consortium

Hexavalent chromium (Cr VI) from industrial wastewaters represents a highly toxic source at low concentrations. Biological treatments with anaerobic granular biomass are a promising alternative for the Cr VI bioremediation. This study evaluated the Cr VI removal in a range of 5-500 mg/L, using an active anaerobic granular consortium. Two removal mechanisms were differentiated from the assays: 1) biological reduction of 70 mg/L to Cr III at a concentration of 250 mg Cr VI/L and 2) physical bioadsorption of 297 mg of Cr VI/L or 31.39 mg of Cr VI/g_biomass at concentration of 500 mg Cr VI /L. The half-maximal inhibitory concentration (IC₅₀) values for the rate and production of methane were 1.4 and 253 mg/L, respectively. In addition, Cr VI is a biostimulant that increase the methane production, in a range from 5 to 100 mg/L, of the anaerobic consortium. This work demonstrates the potential application of the anaerobic granular consortium in metal bioremediation.

New, hybrid pectin-based biosorbents

In this work hybrid pectin-based biosorbents with secondary polysaccharide additives (gellan, carob and xanthan gum, ratio to pectin 1:1, 1:1 and 1:3, respectively) were obtained at two temperatures. The presence of these additives in prepared beads was confirmed by Raman spectra. The SEM micrographs show better homogeneity of blends and grater differences between structures of beads with various additives obtained at higher temperature. The sorption capacity of our hybrid biosorbents as well as sole pectin sorbent is rather the same, and equals 0.85 and 0.70 mmol/g for lead and cadmium, respectively, in pH 4-6.