Preparation and gas storage of high surface area microporous carbon derived from biomass source cornstalks

Advanced Material-oriented Biomass Precise Reconstruction: A Review on Porous Carbon with Inherited Natural Structure and Created Artificial Structure by Post-treatment

Manufacturing of porous carbon with biomass resources has been intensively investigated in recent decades. The diversity of biomass species and great variety of processing methods enable the structural richness of porous carbon as well as their wide applications. In this review, we specifically focused on the structure of biomass-derived porous carbon either inherited from natural biomass or created by post-treatment. The intrinsic structure of plant biomass was briefly introduced and the utilization of the unique structures at different length-scales were discussed. In term of post-treatment, the structural features of activated carbon by traditional physical and chemical activation were summarized and compared in a wide spectrum of biomass species, statistical analysis were performed to evaluate the effectiveness of different activation methods in creating specific pore structures. The similar pore structure of biomass-derived carbon and coal-derived carbon suggested a promising replacement with more sustainable biomass resources in producing porous carbon. In summary, using biomass as porous carbon precursor endows the flexibility of using its naturally patterned micro-structure and the tunability of controlled pore-creation by post treatment. This article is protected by copyright. All rights reserved.

Recent Studies on Supercapacitors with Next-Generation Structures

Supercapacitors have shown great potential as a possible solution to the increasing global demand for next-generation energy storage systems. Charge repositioning is based on physical or chemical mechanisms. There are three types of supercapacitors-the electrochemical double layer, the pseudocapacitor, and a hybrid of both. Each type is further subdivided according to the material used. Herein, a detailed overview of the working mechanism as well as a new method for capacitance enhancement are presented.

Fabrication of Microcapsules by the Combination of Biomass Porous Carbon and Polydopamine for Dual Self-Healing Hydrogels

Artificial development of smart materials from agricultural waste or food residues is particularly desirable for green chemistry. In this paper, dual-network self-healing hydrogels were successfully fabricated by using functional microcapsules. These microcapsules were established by biomass porous carbon (PC) after recycling of apple residues. Glutaraldehyde (GA) as the healing agent was embedded in the porous carbon, and the outer surface was coated with polydopamine (PDA). After the microcapsules were added, modifying guar gum-type hydrogels were successfully obtained with dual self-healing performance by the combination of a healing agent and metal-ligand coordination. The self-healing efficiency was about 89.9% from the tension test, and the fracture strength was measured as 7.68 MPa. These results not only highlight a new idea for the utilization of apple residues but also provide a new method for the preparation of excellent self-healing hydrogels.

Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO₂ Capture

Porous carbon materials with tunable porosities and functionalities represent an important class of CO₂ sorbents. The development of porous carbons from various types of biomass is a sustainable, economic and environmentally friendly strategy. Wood is a biodegradable, renewable, sustainable, naturally abundant and carbon-rich raw material. Given these advantages, the use of wood-based resources for the synthesis of functional porous carbons has attracted great interests. In this mini-review, we present the recent developments regarding sustainable porous carbons derived from wood-based biopolymers (cellulose, hemicelluloses and lignin) and their application in CO₂ capture.

Identification and Mitigation of Generated Solid By-Products during Advanced Electrode Materials Processing

A scalable, solid-state elevated-temperature process was developed to produce high-capacity carbonaceous electrode materials for energy storage devices via decomposition of a starch-based precursor in an inert atmosphere. In a separate study, it is shown that the fabricated carbonaceous architectures are useful as an excellent electrode material for lithium-ion, sodium-ion, and lithium-sulfur batteries. This article focuses on the study and analysis of the formed nanometer-sized by-products during the lab-scale synthesis of the carbon material. The material production process was studied in operando (that is, during the entire duration of heat treatment). The unknown downstream particles in the process exhaust were collected and characterized via aerosol and liquid suspensions, and they were quantified using direct-reading instruments for number and mass concentrations. The airborne emissions were collected using the Tsai diffusion sampler (TDS) for characterization and further analysis. Released by-product aerosols collected in a deionized (DI) water trap were analyzed, and the aerosols emitted from the post-water-suspension were collected and characterized. After long-term sampling, individual particles in the nanometer size range were observed in the exhaust aerosol with layer-structured aggregates formed on the sampling substrate. Upon the characterization of the released aerosol by-products, methods were identified to mitigate possible human and environmental exposures upon industrial implementation.

Pt decorated Artocarpus heterophyllus seed derived carbon as an anode catalyst for DMFC application

A carbohydrate rich biomass is hydrothermally carbonized and thermally degraded to sequester high surfaced carbon. Subsequently, the prepared carbon is decorated with Pt NPs and is executed as an anode catalyst for methanol oxidation reaction (MOR).

Facile synthesis of carbon nanoparticles/graphene composites derived from biomass resources and their application in lithium ion batteries

Carbon nanoparticles/graphene composites have been prepared from a popular and readily available biomasses sodium alginate as raw materials. Commercial quartz sand was used as reusable substrate in this experiment.

The Search for Functional Porous Carbons from Sustainable Precursors

The design and development of carbon-based porous materials perhaps represents one of the most adaptable areas of materials science research. These materials are ubiquitous with the current energy and chemical production infrastructure and as will be highlighted in this book will be absolutely critical in technology development associated with green, sustainable energy/chemical provision (e.g. electricity generation and storage; the Methanol Economy, Biorefinery, etc.) and environmental science (e.g. purification/remediation, gas sorption, etc.). However, alongside these environmental and sustainable provision schemes, there will also be a concurrent need to produce and develop more sustainable porous carbon materials (e.g. microporous, mesoporous, carbon aerogels, etc.). This is particularly relevant when considering the whole life cycle of a product (i.e. from precursor “cradle” to “green” manufacturing and the product end-of-life “grave”). In this regard, carbon materials scientists can take their inspiration from nature and look to the products of natural photosynthetic carbon cycles (e.g. glucose, polysaccharides, lignocellulosics, etc.) as potential precursors in the synthesis of applicable porous carbon materials. If such synthetic strategies are coupled with simpler, lower-energy synthetic processes, then materials production (e.g. the separation media) can in turn contribute to the reduction in greenhouse-gas emissions or the use of toxic elements. These are crucial parameters to be considered in sustainable materials manufacturing. Furthermore, these materials must present useful, beneficial (and preferably tuneable) physicochemical and porous properties, which are least comparable and ideally better than carbon materials (e.g. carbon aerogels, activated carbons, etc.) synthesised via more energy-intensive and less-sustainable pathways. This introductory chapter introduces these concepts and provides the basis for the following book which will provide an introduction and discussion of the possible synthetic pathways to the production of applicable porous carbon materials from sustainable precursors and practices. Furthermore, throughout this book, the application of these exciting sustainable carbon-based materials in the increasingly important field of sustainable chemical and energy provision will be introduced and discussed.

Water bamboo-derived porous carbons as electrode materials for supercapacitors

Water bamboo-derived activated carbon materials were synthesized through the activation of KOH. These materials show a rectangular shape at the scan rate of 50 mV s⁻¹. The activated carbon synthesized at a 2 : 1 ratio of KOH shows the most excellent stability in the long-term cycles.

Porous graphitic carbon nanosheets derived from cornstalk biomass for advanced supercapacitors

Porous graphitic carbon nanosheets (PGCS) are synthesized by an in situ self-generating template strategy based on the carburized effect of iron with cornstalks. Cornstalks firstly coordinate with [Fe(CN)(6)](4-) ions to form the cornstalk-[Fe(CN)(6)](4-) precursor. After carbonization and removal of the catalyst, PGCS are obtained. Series experiments indicate that PGCS can only be formed when using an iron-based catalyst that can generate a carburized phase during the pyrolytic process. The unique structures of PGCS exhibit excellent capacitive performance. The PGCS-1-1100 sample (synthesized from 0.1 M [Fe(CN)(6)](4-) with a carbonization temperature of 1100 °C), which shows excellent electrochemical capacitance (up to 213 F g(-1) at 1 A g(-1)), cycling stability, and rate performance in 6 M KOH electrolyte. In the two-electrode symmetric supercapacitors, the maximum energy densities that can be achieved are as high as 9.4 and 61.3 Wh kg(-1) in aqueous and organic electrolytes, respectively. Moreover, high energy densities of 8.3 and 40.6 Wh kg(-1) are achieved at the high power density of 10.5 kW kg(-1) in aqueous and organic electrolytes, respectively. This strategy holds great promise for preparing PGCS from natural resources, including cornstalks, as advanced electrodes in supercapacitors.

Highly Porous Carbon Materials from Biomass by Chemical and Carbonization Method: A Comparison Study

Porous carbon obtained by dehydrating agent, concentrated sulfuric acid (H2SO4), from biomass containing high cellulose (filter paper (FP), bamboo waste, and empty fruit bunches (EFB)) shows very high surface area and better thermal behavior. At room temperature (without heating), treatment of H2SO4removed all the water molecules in the biomass and left the porous carbon without emitting any gaseous byproducts. Brunauer-Emmett-Teller (BET) surface analysis has shown that bamboo-based carbon has good properties with higher surface area (507.8 m2/g), micropore area (393.3 m2/g), and better thermal behavior (compared to FP and EFB) without any activation or treatment process. By acid treatment of biomass, it was shown that higher carbon composition obtained from FP (85.30%), bamboo (77.72%), and EFB (76.55%) is compared to carbon from carbonization process. Under optimal sulfuric acid (20 wt.%) uses, high carbon yield has been achieved for FP (47.85 wt.%), bamboo (62.4 wt.%), and EFB (55.4 wt.%).

CO2 capture in different carbon materials

In this work, the CO(2) capture capacity of different types of carbon nanofibers (platelet, fishbone, and ribbon) and amorphous carbon have been measured at 26 °C as at different pressures. The results showed that the more graphitic carbon materials adsorbed less CO(2) than more amorphous materials. Then, the aim was to improve the CO(2) adsorption capacity of the carbon materials by increasing the porosity during the chemical activation process. After chemical activation process, the amorphous carbon and platelet CNFs increased the CO(2) adsorption capacity 1.6 times, whereas fishbone and ribbon CNFs increased their CO(2) adsorption capacity 1.1 and 8.2 times, respectively. This increase of CO(2) adsorption capacity after chemical activation was due to an increase of BET surface area and pore volume in all carbon materials. Finally, the CO(2) adsorption isotherms showed that activated amorphous carbon exhibited the best CO(2) capture capacity with 72.0 wt % of CO(2) at 26 °C and 8 bar.

Preparation of capacitor's electrode from sunflower seed shell

Series of nanoporous carbons are prepared from sunflower seed shell (SSS) by two different strategies and used as electrode material for electrochemical double-layer capacitor (EDLC). The surface area and pore-structure of the nanoporous carbons are characterized intensively using N2 adsorption technique. The results show that the pore-structure of the carbons is closely related to activation temperature and dosage of KOH. Electrochemical measurements show that the carbons made by impregnation-activation process have better capacitive behavior and higher capacitance retention ratio at high drain current than the carbons made by carbonization-activation process, which is due to that there are abundant macroscopic pores and less interior micropore surface in the texture of the former. More importantly, the capacitive performances of these carbons are much better than ordered mesoporous carbons and commercial wood-based active carbon, thus highlighting the success of preparing high performance electrode material for EDLC from SSS.