Treatment and kinetic modelling of a simulated dye house effluent by enzymatic catalysis

Mathematical modeling for operative improvement of the decoloration of Acid Red 27 by a novel microbial consortium of Trametes versicolor and Pseudomonas putida: A multivariate sensitivity analysis

In this work, it is presented a first approach of a mathematical and kinetic analysis for improving the decoloration and further degradation process of an azo dye named acid red 27 (AR27), by means of a novel microbial consortium formed by the fungus Trametes versicolor and the bacterium Pseudomonas putida. A multivariate analysis was carried out by simulating scenarios with different operating conditions and developing a specific mathematical model based on kinetic equations describing all stages of the biological process, from microbial growth and substrate consuming to decoloration and degradation of intermediate compounds. Additionally, a sensitivity analysis was performed by using a factorial design and the Response Surface Method (RSM), for determining individual and interactive effects of variables like, initial glucose concentration, initial dye concentration and the moment in time for bacterial inoculation, on response variables assessed in terms of the minimum time for: full decoloration of AR27 (R1 = 2.375 days); maximum production of aromatic metabolites (R2 = 1.575 days); and full depletion of aromatic metabolites (R3 = 12.9 days). Using RSM the following conditions improved the biological process, being: an initial glucose concentration of 20 g l-1, an initial AR27 concentration of 0.2 g l-1 and an inoculation moment in time of P. putida at day 1. The mathematical model is a feasible tool for describing AR27 decoloration and its further degradation by the microbial consortium of T. versicolor and P. putida, this model will also work as a mathematical basis for designing novel bio-reaction systems than can operate with the same principle of the described consortium.

Stable dechlorination of Trichloroacetic Acid (TCAA) to acetic acid catalyzed by palladium nanoparticles deposited on H2-transfer membranes

Trichloroacetic acid (TCAA) is a common disinfection byproduct (DBP) produced during chlorine disinfection. With the outbreak of the Coronavirus Disease 2019 (COVID-19) pandemic, the use of chlorine disinfection has increased, raising the already substantial risks of DBP exposure. While a number of methods are able to remove TCAA, their application for continuous treatment is limited due to their complexity and expensive or hazardous inputs. We investigated a novel system that employs palladium (Pd⁰) nanoparticles (PdNPs) for catalytic reductive dechlorination of TCAA. H₂ was delivered directly to PdNPs in situ coated on the surface of bubble-free hollow-fiber gas-transfer membranes. The H₂-based membrane Pd film reactor (H₂-MPfR) achieved a high catalyst-specific TCAA reduction rate, 32 L/g-Pd/min, a value similar to the rate of using homogeneously suspended PdNP, but orders of magnitude higher than with other immobilized PdNP systems. In batch tests, over 99% removal of 1 mM TCAA was achieved in 180 min with strong product selectivity (≥ 93%) to acetic acid. During 50 days of continuous operation, over 99% of 1 mg/L influent TCAA was removed, again with acetic acid as the major product (≥ 94%). We identified the reaction pathways and their kinetics for TCAA reductive dechlorination with PdNPs using direct delivery of H₂. Sustained continuous TCAA removal, high selectivity to acetic acid, and minimal loss of PdNPs support that the H₂-MPfR is a promising catalytic reactor to remove chlorinated DBPs in practice.

Biodegradation and decolorization of textile dyes by bacterial strains: a biological approach for wastewater treatment

Textile industry releases large quantities of toxic dyes, which is a threat to public health and needs proper management before their release into environment. Out of the different approaches used these days, biodegradation and bio-decolorization is considered an eco-friendly and effective technique as this involves the use of microbes. This technique has the potential to be used effectively for a wide variety of dyes. In biological methods, mainly bacteria, fungi, and some algae are usually employed to remove or decolorize dyes present in textiles effluents and wastewaters. A number of researchers have used bacterial strains and relevant isolated enzymes successfully to decolorize a number of dyes. In this review article, various biological methods that have been used for the biodegradation and decolorization of textile dyes have been described. The review will also revive the significance of biological methods over other physical and chemical treatment methods that would be helpful in ensuring clean environment if used on large scale. Out of these methods, biodegradation through bacterial strains is considered as the best alternative to control water pollution as the growth rate of bacteria is considerably high as compared to other microorganisms. Thus if used the required biomass needed for biodegradation can be obtained in comparatively short interval of time.

Laccase immobilization over multi-walled carbon nanotubes: Kinetic, thermodynamic and stability studies

The biocatalytic performance of immobilized enzyme systems depends mostly on the intrinsic properties of both biomolecule and support, immobilization technique and immobilization conditions. Multi-walled carbon nanotubes (MWCNTs) possess unique features for enzyme immobilization by adsorption. Enhanced catalytic activity and stability can be achieved by optimization of the immobilization conditions and by investigating the effect of operational parameters. Laccase was immobilized over MWCNTs by adsorption. The hybrid material was characterized by Fourier transformed infrared (FTIR) spectroscopy, scanning and transmission electron microscopy (SEM and TEM, respectively). The effect of different operational conditions (contact time, enzyme concentration and pH) on laccase immobilization was investigated. Optimized conditions were used for thermal stability, kinetic, and storage and operational stability studies. The optimal immobilization conditions for a laccase concentration of 3.75μL/mL were a pH of 9.0 and a contact time of 30min (522 Ulac/gcarrier). A decrease in the thermal stability of laccase was observed after immobilization. Changes in ΔS and ΔH of deactivation were found for the immobilized enzyme. The Michaelis-Menten kinetic constant was higher for laccase/MWCNT system than for free laccase. Immobilized laccase maintained (or even increased) its catalytic performance up to nine cycles of utilization and revealed long-term storage stability.

Low-Cost Biodegradation and Detoxification of Textile Azo Dye C.I. Reactive Blue 172 byProvidencia rettgeriStrain HSL1

Present study focuses on exploitation of agricultural waste wheat bran (WB) as growth medium for degradation of textile azo dye C.I. Reactive Blue 172 (RB 172) using a single bacteriumP. rettgeristrain HSL1 (GenBank accession numberJX853768.1). The bacterium was found to completely decolorize 50 mg L−1of dye RB 172 within 20 h at 30 ± 0.2°C under microaerophilic incubation conditions. Additionally, significant reduction in COD (85%) and TOC (52%) contents of dye decolorized medium was observed which suggested its mineralization. Induction in the activities of azoreductase (159%) and NADH-DCIP reductase (88%) provided an evidence for reductive cleavage of dye RB 172. The HPLC, FTIR, and GC-MS analysis of decolorized products confirmed the degradation of dye into various metabolites. The proposed metabolic pathway for biodegradation of RB 172 has been elucidated which showed the formation of 2 intermediate metabolites, namely, 4-(ethenylsulfonyl) aniline and 1-amino-1-(4-aminophenyl) propan-2-one. The acute and phytotoxicity evaluation of degraded metabolites suggests that bacterial strain favors the detoxification of dye RB 172. Thus, WB could be utilized as a low-cost growth medium for the enrichment of bacteria and their further use for biodegradation of azo dyes and its derivatives containing wastes into nontoxic form.

An insight into the effective advanced oxidation process for treatment of simulated textile dye waste water

The comparison in the extent of % mineralization of Simulated Textile Dye Waste Water (STDWW) in three Advanced Oxidation Processes.

Evaluation of efficiencies of radiolysis, photocatalysis and ozonolysis of modified simulated textile dye waste-water

The efficiencies of the several advanced oxidation processes were investigated for treatment of modified simulated textile dye waste water containing Reactive Red 120 in terms of the oxygen-equivalent chemical oxidation capacity and cost of inputs.

Low cost CaCl₂ pretreatment of sugarcane bagasse for enhancement of textile dyes adsorption and subsequent biodegradation of adsorbed dyes under solid state fermentation

Pretreatments to sugarcane bagasse (SCB) such as CaCl2, alkali, ammonia, steam and milling showed 91%, 46%, 47%, 42% and 56% adsorption of Solvent Red 5B (SR5B); 92%, 57%, 58%, 56% and 68% adsorption of simulated dyes mixture (SDM), and 86%, 45%, 49%, 44% and 56% adsorption of a real textile effluent (RTE), respectively. However, the untreated SCB showed 32%, 38% and 30% adsorption of SR5B, SDM and RTE, respectively. Adsorption of SR5B on CaCl2 pretreated SCB follows pseudo-second order kinetics. SEM and FTIR analysis reveals the delignification of CaCl2 pretreated SCB. SR5B, SDM and RTE adsorbed on CaCl2, alkali, ammonia, steam and milling pretreated SCB were decolorized under solid state fermentation using isolated Providencia staurti strain EbtSPG. Tray bioreactor study showed 86% American Dye Manufacturers Institute (ADMI) removal of RTE in 72h. Biodegradation of adsorbed SR5B was confirmed using FTIR, HPLC and HPTLC.

Green coconut fiber: a novel carrier for the immobilization of commercial laccase by covalent attachment for textile dyes decolourization

Commercial laccase formulation was immobilized on modified green coconut fiber silanized with 3-glycidoxypropyltrimethoxysilane, aiming to achieve a cheap and effective biocatalyst. Two different strategies were followed: one point (pH 7.0) and multipoint (pH 10.0) covalent attachment. The influence of immobilization time on enzymatic activity and the final reduction with sodium borohydride were evaluated. The highest activities were achieved after 2 h of contact time in all situations. Commercial laccase immobilized at pH 7.0 was found to have higher activity and higher affinity to the substrate. However, the immobilization by multipoint covalent attachment improved the biocatalyst thermal stability at 50 °C, when compared to soluble enzyme and to the immobilized enzyme at pH 7.0. The Schiff's bases reduction by sodium borohydride, in spite of causing a decrease in enzyme activity, showed to contribute to the increase of operational stability through bonds stabilization. Finally, these immobilized enzymes showed high efficiency in the continuous decolourization of reactive textile dyes. In the first cycle, the decolourization is mainly due to dyes adsorption on the support. However, when working in successive cycles, the adsorption capacity of the support decreases (saturation) and the enzymatic action increases, indicating the applicability of this biocatalyst for textile wastewater treatment.

Use of enzymatic bio-Fenton as a new approach in decolorization of malachite green

An enzymatic reaction using glucose oxidase was applied for in situ production of hydrogen peroxide for use in simultaneously Fenton's reaction in decolorization of malachite green. It was found that decolorization rate increased by increasing of glucose concentration from 0.2 g/L to 1.5 g/L. Decolorization rate showed different behaviors versus temperature changes. Initial rate of decolorization process was increased by increasing of temperature; after 30 minutes, especially at temperatures above 30°C, the decolorization rate was gradually reduced. The pH value in the reaction media was decreased from natural to about pH = 3 which had synergic effect on the Fenton process by stabilizing of Fe²⁺ ions.

Heterologous laccase production and its role in industrial applications

Laccases are blue multicopper oxidases, catalyzing the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. These enzymes are implicated in a variety of biological activities. Most of the laccases studied thus far are of fungal origin. The large range of substrates oxidized by laccases has raised interest in using them within different industrial fields, such as pulp delignification, textile dye bleaching, and bioremediation. Laccases secreted from native sources are usually not suitable for large-scale purposes, mainly due to low production yields and high cost of preparation/purification procedures. Heterologous expression may provide higher enzyme yields and may permit to produce laccases with desired properties (such as different substrate specificities, or improved stabilities) for industrial applications. This review surveys researches on heterologous laccase expression focusing on the pivotal role played by recombinant systems towards the development of robust tools for greening modern industry.