Evaluation of performance and community dynamics of microorganisms during treatment of distillery spent wash in a three stage bioreactor

Degradation and decolourization potential of ligninolytic enzyme producing Bacillus paramycoides BL2 and Micrococcus luteus BL3 for pulp paper industrial effluent and its toxicity evaluation

Aim of this study was to optimize the production of Ligninolytic enzyme for the degradation of complex pollutants present in pulp paper industrial effluent (PPIE). Two ligninolytic enzyme-producing bacterial strains were isolated from PPIE and identified as Bacillus paramycoides strain BL2 (MZ676667) and Micrococcus luteus strains BL3 (MZ676668). The identified bacterial strain Bacillus paramycoides strain BL2 showed optimum production of LiP (4.30 U/ml), MnP (3.38 U/ml) at 72 h of incubation, while laccase (4.43 U/ml) at 96 h of incubation. While, Micrococcus luteus strains BL3 produced maximum LiP (3.98) and MnP (3.85 U/ml) at 96 h of incubation and maximum laccase (3.85 U/ml) at 72 h of incubation, pH 7-8, and temperatures of 30-35 °C. Furthermore, in the presence of glucose (1.0%) and peptone (0.5%) as nutrient sources, the enzyme activity of consortium leads to reduction of lignin (70%), colour (63%) along with COD (71%) and BOD (58%). The pollutants detected in control i.e. 3.6-Dioxa-2,7-disilaoctane, 2-Heptnoic acid,trimethylsilyl ester, 7-Methyldinaphtho [2,1-b,1',2'-d] silole, Hexadeconoic acid, trimethylysilyl ester, Methyl1(Z)-3,3-dipheny.1-4-hexenoale, 2,6,10,14,18,22-Tetracosahexane,2,2-dimethylpropyl(2Z,6E)-10,11epoxy5,6 Dihyrostigmasterol, acetate were completely diminished. The toxicity of PPIE was reduced up to 75%. Hence, knowledge of this study will be very useful for industrial sector for treatment of complex wastewater.

Evaluation of cytotoxicity and genotoxicity effects of refractory pollutants of untreated and biomethanated distillery effluent using Allium cepa

Environmental pollution caused by the discharge of raw and partly treated distillery effluent has become a serious and threatening problem due to its high pollution load. The aim of the present study was to assess the physicochemical load in alcohol distillery effluent before and after biomethanation treatment and the cyto- and genotoxicity effects of refractory pollutants emanated in raw/untreated and biomethanated distillery effluent on the ultrastructural and biochemical responses of Allium cepa root tip cells. Physicochemical analysis revealed high biochemical oxygen demand (BOD: 47840-36651 mg L^-1), chemical oxygen demand (COD: 93452-84500 mg L^-1) and total dissolved solids (TDS: 64251-74652 mg L^-1) in raw and biomethanated effluent along with metal(loid)s (Fe: 456.152-346.26; Zn: 1.654-1.465; Cu: 0.648-0.562; Ni: 1.012-0.951, and Pb: 0.264 mg L^-1) which were beyond the safe discharge values prescribed by the environmental regulatory agencies. The UV-Visible and Fourier transform infrared spectrophotometry analyses confirmed the high levels of organic, inorganic, and mixed contaminants discharged in raw and biomethanated distillery effluents. Furthermore, GC-MS analysis characterised chemical contaminants, such as hexadecanoic acid, butanedioic acid, bis(trimethylsilyl) ester; hexadecane, 2,6,11,15-tetramethyl, stigmasterol, and β-sitosterol trimethylsilyl ether that have been reported as androgenic-mutagenic, and endocrine disrupting chemicals by the United States Environmental Protection Agency (U.S. EPA). The cytotoxicity measured by A. cepa showed dose depended inhibition root growth inhibition and simultaneous reduction in mitotic index in tested effluents. The chromosomal aberrations studies resulted in laggard chromosomes, sticky chromosomes, vagrant chromosomes, chromosome loss, c-mitosis, chromosome bridge, abnormal metaphase, and disturbed anaphase as found in a dose-dependent manner. Furthermore, dose-dependent enhancement in the levels of malondialdehyde, hydrogen peroxide, and antioxidative enzymes, such as superoxide dismutase, ascorbate peroxidase, and catalase were found to be higher in raw effluents treated root cells compared to biomethanated distillery effluent. Analysis of ultrastructural changes in root tip cells by TEM analysis revealed dramatic changes in the morphology of cell organelles and accumulation of metallic elements in and on the surface tissues. The results concluded that the discharged distillery effluents retained certain toxic pollutants which imposed cytotoxic and genotoxic hazards to A. cepa. Thus, for the sake of environmental protection, the raw as well as the disposed biomethanated effluent must be efficiently treated before its dumping into the terrestrial ecosystem.

Residual pollutants in treated pulp paper mill wastewater and their phytotoxicity and cytotoxicity in Allium cepa

Discharged pulp and paper mill wastewater (PPMW) were collected near M/s K. R. pulp and papers Limited, Shahjahanpur, India. Chemical analysis of the wastewater showed high BOD (3653-4180 mg L^-1) and COD (17,890-19100 mg L^-1) values from two different sampling sites. The levels of total phenol were in the range of 389-432 mg L^-1; nitrogen (125-234 mg L^-1), sulfate (1926-2098 mg L^-1), chloride (3.12-5.43 mg L^-1) and lignin (38,950-39,000 mg L^-1) along with various heavy metals (Fe, 87-79; Zn, 34-22; Cu, 3.28-2.57; Cd, 1.90-0.36; Ni, 6-5, and Pb, 41.23-36.54 mg L^-1) were above the permissible limits recommended by the CPCB and the USEPA. The BOD/COD ratio was  < 0.2 which indicated very low biodegradability of the organic matters present in the effluent. The organometallic complex generated from the pulp and paper industry persists in the environment and might be toxic to aquatic organisms. The organic polymers, lignin, metals and ions present in the PPMW were characterized using SEM, EDAX, FTIR, and UV-VIS spectroscopy. The major pollutants detected in the discharged PPMW included nonacosane, heptacosane, octadecanoic acid, hexadecane, and 6-benzamide- 3- [2- [1-(phenylmethyl)-4-piperidinyl] ethyl]-1, 2-benzisoxazole, as well as a group of plant fatty acids classified as EDCs, and mutagenic pollutants. The cytotoxic and androgenic properties of these complex organics were examined. The seed germination test with Phaseolus mungo and cytotoxicity test with Allium cepa showed that at > 20% concentration of PPMW, α-amylase production was inhibited and chromosomal segregation at metaphase and anaphase during cell division was disturbed, which resulted in c-mitosis, sticky chromosomes, and laggard chromosomes. In addition, SEM of the root of A. cepa showed fissures and fractured tissues of the root cap, probably due to the inhibition of auxins that were responsible for root cap formation. The findings indicated A. cepa as a good test model for examining the DNA damage and cytotoxicity by PPMW, and the discharged effluent should be treated at a tertiary stage for environmental protection.

Metagenomics analysis of rhizospheric bacterial communities of Saccharum arundinaceum growing on organometallic sludge of sugarcane molasses-based distillery

The present paper aims to explore the rhizospheric bacterial communities associated with Saccharum arundinaceum grown on organometallic pollutants-rich hazardous distillery sludge. The sequence analysis of 16S rRNA V3-V4 hypervariable region with Illumina MiSeq platform showed 621,897 OTUs derived from rhizospheric and non-rhizospheric distillery sludge samples out of 1,191,014 and 901,757 sequences read, respectively. The major phyla detected in rhizospheric sludge sample were Proteobacteria (50%), Bacteriodetes (33%), Firmicutes (5%) Gemmatimonadetes (2%), Chloroflexi (2%), and Tenericutes (2%). The dominant three genera were detected as Rheinheimera (21%), Sphingobacterium (17%), and Idiomarina (8%). In addition, other minor genera such as uncultured Bacillus (4%), Acidothermus (4%), Bacillus (3%), Pseudomonas (2%), Flavobacterium (2%), uncultured bacterium (2%), Parapedobacter (2%), Alcanivorax (2%), Acholeplasma (2%), Hyphomonas (1%), and Aquamicrobium were also detected (1%) in rhizospheric sludge. Our results suggested that rhizospheric bacterial communities associated with S. arundinaceum were substantially different in richness, diversity, and relative abundance of taxa compared to non-rhizospheric sludge. Further, the comparative organic pollutant analysis from non-rhizospheric and rhizospheric sludge samples through GC-MS analysis revealed the disappearance of few compounds and generation of some compounds as new metabolic products by the activity of rhizospheric bacterial communities. The results of this study will be helpful in understanding the role of rhizospheric bacterial communities responsible for degradation and detoxification of complex organometallic waste and, thus, can help in designing appropriate phytoremediation studies for eco-restoration of polluted sites.

Advanced biological sequential treatment of mature landfill leachate using aerobic activated sludge SBR and fungal bioreactor

This study utilized Penicillium spp. to treat mature landfill leachate (MLL) in a continuous bioreactor and batch experimental tests under non-sterile conditions. MLL characteristics such as chemical oxygen demand (COD), soluble COD (sCOD), total carbon (TC), total organic carbon (TOC), and color removal efficiency were determined. The lignocellulosic enzymatic activity of laccase (Lac), lignin-peroxidase (LiP), and manganese-peroxidase (MnP) was also determined. The batch experimental test was carried out with raw and pretreated MLL containing the initial NH4 +-N concentrations of 0, 105, 352, and 914 mg/L. A maximum COD reduction of 41% and maximum enzymatic activity of 193, 37, and 25 U/L for Lac, LiP and MnP was recorded for the MLL containing 352 mg/L NH4 +-N. The continuous bioreactor exhibited maximum values of 52, 54, 60, 58, and 75 percentage of COD, sCOD, TC, TOC, and color removal efficiency with MLL containing 352 mg/L NH4 +-N that was pretreated at HRT 120 h, while the maximum detected lignocellulosic enzymatic activities were 149, 27, and 16 U/L for Lac, LiP, and MnP, respectively. A total of 64% COD reduction was achieved from the raw MLL considering 12% COD and 100% NH4 +-N reduction in the aerobic activated sludge sequencing batch reactor pretreatment process. The steady and higher removal efficiency of the bioreactor over the entire study period is promising for further exploration to enhance removal of refractory contaminants from the MLL.

The pathway of 2,2-dichlorovinyl dimethyl phosphate (DDVP) degradation by Trichoderma atroviride strain T23 and characterization of a paraoxonase-like enzyme

Dichlorvos (DDVP) is widely applied in the agricultural industry, and its residues are considered hazardous to the environment. Microbial bioremediation is an innovative technology with the potential to mitigate such pollution. Trichoderma atroviride strain T23, a filamentous fungus, is very efficient at degrading DDVP. Therefore, we used DDVP as a model organophosphate pesticide to study the mechanism by which Trichoderma degrades organophosphate pesticides, with the aim of attaining a global understanding of the molecular mechanism of enzymatic degradation of organophosphate pesticides by beneficial fungi. DDVP can be biodegraded via two routes, and the primary one involves hydrolysis of the P-O bond, which can result in the production of the novel degradation intermediate trichloroethanol. TaPon1-like showed continuously high expression during 120 h, and deletion of the gene decreased the efficiency of P-O bond hydrolysis. The enzyme produced by TaPon1-like had a low K_m for DDVP (0.23 mM) and a high k_cat (204.3 s^-1). The enzyme was able to hydrolyze broad substrates such as organophosphate oxons and lactone and maintain stable activity in a wide range of pH and temperature values. The TaPon1-like hydrolase played an important role in the first step of DDVP degradation by strain T23 and contributed to a comprehensive understanding of the mechanism of organophosphate pesticide degradation.

Peptides Fixing Industrial Textile Dyes: A New Biochemical Method in Wastewater Treatment

The aim of the present work was the development of a new biological method for the treatment of textile industry effluents, which is cheaper, more profitable, and eco-friendly. This method is essentially based on the synthesis of dye-fixing peptides. The use of peptides synthesized via a solid-phase synthesis to fix a reference textile dye like “Cibacron blue” (CB) and the performance analysis of binding assays were the main objectives of this study. For this reason, two peptides P1 (NH2-C-G-G-W-R-S-Q-N-Q-G-NH2) and P2 (NH2-C-G-G-R-R-Y-Q-P-D-S-NH2) binding with the CB dye were synthesized by the solid-phase peptide synthesis (SPPS) technique. The obtained results showed significant fixation yields of CB-peptides of 91.5% and 45.9%, respectively, and consequently, their interesting potential as a tool for a new biochemical method in the pollution prevention of textile wastewater.

Characterisation of manganese peroxidase and laccase producing bacteria capable for degradation of sucrose glutamic acid-Maillard reaction products at different nutritional and environmental conditions

Maillard reactions products (MRPs) are a major colorant of distillery effluent. It is major source of environmental pollution due to its complex structure and recalcitrant nature. This study has revealed that sucrose glutamic acid-Maillard reaction products (SGA-MRPs) showed many absorption peaks between 200 and 450 nm. The absorption maximum peak was noted at 250 nm in spectrophotometric detection. This indicated the formation of variable molecular weight Maillard products during the SGA-MRPs formation at high temperature. The identified aerobic bacterial consortium consisting Klebsiella pneumoniae (KU726953), Salmonella enterica (KU726954), Enterobacter aerogenes (KU726955), Enterobacter cloaceae (KU726957) showed optimum production of MnP and laccase at 120 and 144 h of growth, respectively. The potential bacterial consortium showed decolourisation of Maillard product up to 70% in presence of glucose (1%), peptone (0.1%) at optimum pH (8.1), temperature (37 °C) and shaking speed (180 rpm) within 192 h of incubation. The reduction of colour of Maillard product correlated with shifting of absorption peaks in UV–Vis spectrophotometry analysis. Further, the changing of functional group in FT-IR data showed appearance of new peaks and GC–MS analysis of degraded sample revealed the depolymerisation of complex MRPs. The toxicity evaluation using seed of Phaseolus mungo L. showed reduction of toxicity of MRPs after bacterial treatment. Hence, this study concluded that developed bacterial consortium have capability for decolourisation of MRPs due to high content of MnP and laccase.

Detection of Androgenic-Mutagenic Compounds and Potential Autochthonous Bacterial Communities during In Situ Bioremediation of Post-methanated Distillery Sludge

Sugarcane-molasses-based post-methanated distillery waste is well known for its toxicity, causing adverse effects on aquatic flora and fauna. Here, it has been demonstrated that there is an abundant mixture of androgenic and mutagenic compounds both in distillery sludge and leachate. Gas chromatography-mass spectrometry (GC-MS) analysis showed dodecanoic acid, octadecanoic acid, n-pentadecanoic acid, hexadecanoic acid, β-sitosterol, stigmasterol, β-sitosterol trimethyl ether, heptacosane, dotriacontane, lanosta-8, 24-dien-3-one, 1-methylene-3-methyl butanol, 1-phenyl-1-propanol, 5-methyl-2-(1-methylethyl) cyclohexanol, and 2-ethylthio-10-hydroxy-9-methoxy-1,4 anthraquinone as major organic pollutants along with heavy metals (all mg kg^-1): Fe (2403), Zn (210.15), Mn (126.30, Cu (73.62), Cr (21.825), Pb (16.33) and Ni (13.425). In a simultaneous analysis of bacterial communities using the restriction fragment length polymorphism (RFLP) method the dominance of Bacillus sp. followed by Enterococcus sp. as autochthonous bacterial communities growing in this extremely toxic environment was shown, indicating a primary community for bioremediation. A toxicity evaluation showed a reduction of toxicity in degraded samples of sludge and leachate, confirming the role of autochthonous bacterial communities in the bioremediation of distillery waste in situ.

Implications of stillage land disposal: a critical review on the impacts of fertigation

Stillage is the main wastewater from ethanol production, generated specifically in the step of distillation. Regardless the feedstock, stillage contains high concentrations of organic matter, potassium and sulfates, as well as acidic and corrosive characteristics. Currently almost the entire volume of stillage generated in Brazilian distilleries is directed to the fertigation of sugarcane fields, due to its fertilizer character. However, the polluting potential of stillage characterizes its land disposal as problematic, considering probable negative impacts on the soil structure and water resources in case of excessive dosages. Since the literature lacks critical content describing clearly the cons related to the reuse of stillage in agriculture in the long-term, this review aimed to assess the real polluting potential of stillage, and the implications of its land disposal and/or discharge into water bodies. Evidence from the literature indicate that the main obstacles to reuse stillage in natura include risks of soil salinization; clogging of pores, reduction in the microbial activity and the significant depletion of dissolved oxygen concentrations in water bodies; contamination per nitrates and eutrophication; soil structure destabilization due to high concentrations of potassium and sodium; and, possible acidification of soil and water resources, considering the low pH of stillage (∼4,5). Toxic metals, such as cadmium, lead, copper, chromium and nickel, were also identified in concentrations above the recommended limits in stillage samples, increasing risks to human health (e.g. carcinogenic potential) and to crops (e.g. productivity loss). In short, although some studies report benefits from the land application of stillage, its treatment prior to disposal is essential to make fertigation an environmentally suitable practice.

Enhanced removal of COD and color from landfill leachate in a sequential bioreactor

In the present study, a sequential treatment process was carried out using a fungal sp. (Phanerochaete sp.) followed by a bacterial sp. (Pseudomonas sp.) for the degradation and detoxification of contaminants in landfill leachate. The process was optimized using Box-Behnken design (BBD) and response surface methodology (RSM) for three variables (C source, N source and duration), while monitoring two responses (% COD and color removal). After treatment in a bioreactor under optimized conditions, enhanced removal of COD (76.9%) and color (45.4%) was observed. Further, GC-MS analysis of metabolites detected at different stages of treatment showed formation of degradation products of lignin and polycyclic aromatic compounds. Treatment efficiency was finally evaluated by the alkaline comet assay in HepG2 human hepato-carcinoma cells. The results indicated no statistically significant DNA damage at the end of the treatment, making the effluent suitable to be discharged conforming to the safety standards.

Adsorption of colored pollutants from distillery spent wash by native and treated fungus: neurospora intermedia

The native and physico-chemically treated fungal biomasses of Neurospora intermedia were used for adsorption of colored pollutants from distillery spent wash in batch systems. Experiments were conducted at varying color concentrations of the effluent (1,000-6,500 CU). The kinetics of effect of initial sorbate concentration, dose of biosorbent, temperature, and pH on adsorption were studied. Physical and chemical pretreatments of biomass resulted in an increase or decrease in color removal capacity. This effect was further studied by FTIR analysis of the dried fungal mycelium. The maximum color uptake on all the tested fungal biomass preparations was observed at pH 3.0 and temperature 30 °C, within first 4 h. The Langmuir and Freundlich adsorption models were used for the mathematical description of the biosorption equilibrium and the data showed an optimal fit to these isotherms. Kinetic parameters indicated the dominance of Lagergren pseudo first-order kinetic model for adsorption. On the basis of maximum adsorption capacity, the color removal capacity by fungal preparations was in the order of native > heat > acid, base.

Toxicological evaluation of paper mill sewage sediment treated by indigenous dibenzofuran-degrading Pseudomonas sp

Organic pollutants present in the pulp and paper mill sewage were extracted with dichloromethane/acetone (1:1v/v), and the extract was added to minimal salt medium to study the degrading and detoxifying potential of Pseudomonas sp. strain ISTDF1. GC-MS analysis performed after biodegradation showed removal of chlorinated compounds like dichloroacetic acid, heptadecyl ester (RT=28.99) and formation of simpler compounds like 4-isopropylbenzaldehyde (RT=7.52). Methyltetrazolium (MTT) assay for cytotoxicity, 7-ethoxyresorufin-O-deethylase (EROD) assay for dioxin-like behaviour and alkaline comet assay for genotoxicity were carried out in human hepato-carcinoma cell line HuH7 before and after bacterial treatment. The bacterium reduced toxicity as shown by a 5-fold increase in LC(50) value, 2110-fold reduction in benzo (α) pyrene equivalent value and an 8-fold reduction in Olive Tail Moment after 240h treatment. The EROD assay was found to be a useful method which indicated positive correlation with MTT and comet assay in post-biodegradation toxicity evaluation.

Ligninolytic enzyme production by Phanerochaete chrysosporium immobilized on different carriers

In this study, several different carriers were employed in a Phanerochaete chrysosporium BVH-F-1767 cell immobilization study. Polystyrene foam was shown to be the optimum carrier material from organism biomass measurements and maximum MnP production (915.62 U L(-1)). The maximum MnP activity of polystyrene foam system was achieved 2-5 days sooner than with the other carrier systems studied. It was thus clear that the polystyrene foam approach shortened the culture cycle. Analysis of the carrier mechanisms employed in this study revealed that polystyrene foam had larger internal spaces and a greater surface area, and thus the potential to enhance the transfer efficiency of oxygen and nutrients to the fungus and accelerate its growth. The mycelia of the fungus were able to associate closely with the unique internal pore structure of the polystyrene foam, providing a more quiescent microenvironment and helping to maintain the stability of the cultivation system.

Les colorants textiles sources de contamination de l’eau : CRIBLAGE de la toxicité et des méthodes de traitement

Les colorants sont largement utilisés dans les imprimeries, les produits alimentaires, cosmétiques et cliniques, mais en particulier dans les industries textiles pour leur stabilité chimique et la facilité de leur synthèse et leur variété de couleurs. Cependant, ces colorants sont à l’origine de la pollution une fois évacués dans l’environnement. La production mondiale des colorants est estimée à plus de 800 000 t•an-1et les colorants azoïques sont majoritaires et représentent 60-70 %. Compte tenu de la composition très hétérogène de ces derniers, leur dégradation conduit souvent à la conception d’une chaîne de traitement physique-chimique et biologique assurant l’élimination des différents polluants par étapes successives. Dés études ont montré que plusieurs colorants azoïques sont toxiques et mutagènes et le traitement biologique de ces colorants semble présenter un intérêt scientifique majeur. Les traitements physico-chimiques communs (adsorption, coagulation/floculation, précipitation etc.) sont couramment utilisés pour les effluents industriels. Malgré leur rapidité, ces méthodes se sont avérées peu efficaces compte tenu des normes exigées sur ces rejets. Le traitement biologique constitue une alternative fiable; en effet, plusieurs microorganismes sont capables de transformer les colorants azoïques en sous-produits incolores. Les bactéries dégradent les colorants azoïques en deux étapes : un clivage de liaison azo, par l’intermédiaire de l’azoréductase, suivi d’une oxydation des amines aromatiques formées lors de la première étape. L’azoréduction constitue alors une étape clé du traitement des effluents chargés de ces colorants.

Acid tolerance of an acid mine drainage bioremediation system based on biological sulfate reduction

The acid tolerance response of an AMD bioremediation system based on sulfate reduction was investigated. Efficient sulfate reduction was observed with a maximum sulfate reduction rate of 12.3±0.8 mg L(-1) d(-1) and easily available organic carbon was released during high acid treatment with an initial pH of 2.0. The rapid increase in sulfate reduction was observed when the extreme acid treatment with an initial pH of 1.0 was stopped. Column experiment on acid shock showed that efficient sulfate reduction was maintained while precipitation of Cu or Zn still occurred during extreme or high acid shock. More than 98% of Cu and 85% of Zn were removed in the high acid column experiment with influent pH of 2.0. The majority bacteria in the remediation system used for high acid drainage belonged to genera Clostridiaceae, Eubacterium, Pseudobutyrivibrio, and Clostridium. These findings showed high acid tolerance of the straw remediation system.

Cadmium and mercury removal from non-point source wastewater by a hybrid bioreactor

The purpose of this study was to remove cadmium (Cd) and mercury (Hg) from non-point source wastewater by a hybrid bioreactor consisting of two different processes (anaerobic-anoxic-aerobic and photoautotrophic). The results showed that the bioreactor could concurrently culture heterotrophic and autotrophic microorganisms, and removed Cd and Hg from the wastewater successfully. The average removal efficiencies were 79% and 66%, respectively for Cd and Hg. The relationship between Cd removal rate and biofilm mass was observed to be significant (p<0.05) during different seasons. The Hg removal was mainly due to the bioaccumulation in macrophytes via a photoautotrophic process. Due to the increase of the bacterial diversity under the rejuvenated conditions modulated by the hybrid bioreactor, the growth conditions of the native bacterial habitat were improved. The results demonstrate that the environmentally benign, easily-deployed, sludge free and cost-effective hybrid bioreactor can efficiently remove Cd and Hg from non-point source wastewater.