Construction and characterization of a photosynthetic bacterium genetically engineered for Hg2+ uptake

The potential of microorganisms as biomonitoring and bioremediation tools for mercury-contaminated soils

Mercury (Hg) pollution is a global issue due to the high toxicity and wide dispersion of Hg around the world. Whether due to anthropogenic activities or natural processes, Hg emissions are steadily increasing, with very high levels in some regions, directly threatening human and ecosystem health. However, bacteria and fungi have evolved and adapted in response to Hg-induced stress and have developed tolerance mechanisms, notably based on the mer operon system that is involved in Hg uptake and biovolatilization via Hg reduction reactions. Other processes, such as bioaccumulation or extracellular sequestration, are involved in Hg resistance, and the study of contaminated soils has allowed the isolation of a number of microorganisms capable of these mechanisms, with strong potential for the implementation of bioremediation approaches. In addition to playing an important role in determining the fate of Hg in the biogeochemical cycle, these microorganisms can indeed be applied to reduce Hg concentrations or at least stabilize Hg for the remediation of polluted soils. Moreover, thanks to the development of biotechnological tools, bioremediation based on Hg-tolerant microorganisms can be optimized. Finally, these microorganisms are relevant candidates for biomonitoring, for example, through the engineering of biosensors, because the detection of Hg is a major issue in preserving the health of living beings.

Synthetic bacteria for the detection and bioremediation of heavy metals

Toxic heavy metal accumulation is one of anthropogenic environmental pollutions, which poses risks to human health and ecological systems. Conventional heavy metal remediation approaches rely on expensive chemical and physical processes leading to the formation and release of other toxic waste products. Instead, microbial bioremediation has gained interest as a promising and cost-effective alternative to conventional methods, but the genetic complexity of microorganisms and the lack of appropriate genetic engineering technologies have impeded the development of bioremediating microorganisms. Recently, the emerging synthetic biology opened a new avenue for microbial bioremediation research and development by addressing the challenges and providing novel tools for constructing bacteria with enhanced capabilities: rapid detection and degradation of heavy metals while enhanced tolerance to toxic heavy metals. Moreover, synthetic biology also offers new technologies to meet biosafety regulations since genetically modified microorganisms may disrupt natural ecosystems. In this review, we introduce the use of microorganisms developed based on synthetic biology technologies for the detection and detoxification of heavy metals. Additionally, this review explores the technical strategies developed to overcome the biosafety requirements associated with the use of genetically modified microorganisms.

Research on soft sensing method of photosynthetic bacteria fermentation process based on ant colony algorithm and least squares support vector machine

Photosynthetic bacteria wastewater treatment is an efficient water pollution treatment method, but photosynthetic bacteria fermentation is a multivariable, non-linear, and time-varying process. So it is difficult to establish an accurate model. Aiming at the difficulty of online measurement of key parameters, such as bacterial concentration and matrix concentration in photosynthetic bacteria fermentation process, an improved ant colony algorithm least squares support vector machine (AC-LSSVM) soft sensing model method is proposed in this paper. Firstly, the virtual sensing subsystem of the photosynthetic bacteria fermentation process is proposed, with measurable parameters as input and unmeasurable key parameters as output, and the left inverse soft sensing model of virtual sensing is constructed. Then, the ant colony algorithm can quickly find the shortest path to optimize the parameters of the traditional PI regulation, to improve the dynamic performance and accuracy of parameter measurement in the fermentation process. After that, the ant colony algorithm is used to optimize penalty parameters C and kernel parameters σ of LSSVM, which effectively avoids the local optimization and improves the computing power and global optimization ability. Finally, the soft sensing prediction model of the photosynthetic bacteria fermentation process based on AC-LSSVM is established. Compared with SVM and LSSVM prediction models, the root mean square error of bacterial concentration and matrix concentration based on the AC-LSSVM model are 0.468 and 0.126, respectively. The simulation analysis shows that this model has less error and better prediction ability, and it can meet the needs of online prediction of key parameters of photosynthetic bacteria fermentation.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Potential Application of Living Microorganisms in the Detoxification of Heavy Metals

Heavy metal (HM) exposure remains a global occupational and environmental problem that creates a hazard to general health. Even low-level exposure to toxic metals contributes to the pathogenesis of various metabolic and immunological diseases, whereas, in this process, the gut microbiota serves as a major target and mediator of HM bioavailability and toxicity. Specifically, a picture is emerging from recent investigations identifying specific probiotic species to counteract the noxious effect of HM within the intestinal tract via a series of HM-resistant mechanisms. More encouragingly, aided by genetic engineering techniques, novel HM-bioremediation strategies using recombinant microorganisms have been fruitful and may provide access to promising biological medicines for HM poisoning. In this review, we summarized the pivotal mutualistic relationship between HM exposure and the gut microbiota, the probiotic-based protective strategies against HM-induced gut dysbiosis, with reference to recent advancements in developing engineered microorganisms for medically alleviating HM toxicity.

Genetically Engineered Organisms: Possibilities and Challenges of Heavy Metal Removal and Nanoparticle Synthesis

Heavy metal removal using genetically engineered organisms (GEOs) offer more cost and energy-efficient, safer, greener, and environmentally-friendly opportunities as opposed to conventional strategies requiring hazardous or toxic chemicals, complex processes, and high pressure/temperature. Additionally, GEOs exhibited superior potentials for biosynthesis of nanoparticles with significant capabilities in bioreduction of heavy metal ions that get accumulated as nanocrystals of various shapes/dimensions. In this context, GEO-aided nanoparticle assembly and the related reaction conditions should be optimized. Such strategies encompassing biosynthesized nanoparticle conforming to the green chemistry precepts help minimize the deployment of toxic precursors and capitalize on the safety and sustainability of the ensuing nanoparticle. Different GEOs with improved uptake and appropriation of heavy metal ions potentials have been examined for bioreduction and biorecovery appliances, but effective implementation to industrial-scale practices is nearly absent. In this perspective, the recent developments in heavy metal removal and nanoparticle biosynthesis using GEOs are deliberated, focusing on important challenges and future directions.

Recent advancements in hydrocarbon bioremediation and future challenges: a review

Petrochemicals are important hydrocarbons, which are one of the major concerns when accidently escaped into the environment. On one hand, these cause soil and fresh water pollution on land due to their seepage and leakage from automobile and petrochemical industries. On the other hand, oil spills occur during the transport of crude oil or refined petroleum products in the oceans around the world. These hydrocarbon and petrochemical spills have not only posed a hazard to the environment and marine life, but also linked to numerous ailments like cancers and neural disorders. Therefore, it is very important to remove or degrade these pollutants before their hazardous effects deteriorate the environment. There are varieties of mechanical and chemical methods for removing hydrocarbons from polluted areas, but they are all ineffective and expensive. Bioremediation techniques provide an economical and eco-friendly mechanism for removing petrochemical and hydrocarbon residues from the affected sites. Bioremediation refers to the complete mineralization or transformation of complex organic pollutants into the simplest compounds by biological agents such as bacteria, fungi, etc. Many indigenous microbes present in nature are capable of detoxification of various hydrocarbons and their contaminants. This review presents an updated overview of recent advancements in various technologies used in the degradation and bioremediation of petroleum hydrocarbons, providing useful insights to manage such problems in an eco-friendly manner.

Comparative Metagenomic Study of Rhizospheric and Bulk Mercury-Contaminated Soils in the Mining District of Almadén

Soil contamination by heavy metals, particularly mercury (Hg), is a problem that can seriously affect the environment, animals, and human health. Hg has the capacity to biomagnify in the food chain. That fact can lead to pathologies, of those which affect the central nervous system being the most severe. It is convenient to know the biological environmental indicators that alert of the effects of Hg contamination as well as the biological mechanisms that can help in its remediation. To contribute to this knowledge, this study conducted comparative analysis by the use of Shotgun metagenomics of the microbial communities in rhizospheric soils and bulk soil of the mining region of Almadén (Ciudad Real, Spain), one of the most affected areas by Hg in the world The sequences obtained was analyzed with MetaPhlAn2 tool and SUPER-FOCUS. The most abundant taxa in the taxonomic analysis in bulk soil were those of Actinobateria and Alphaproteobacteria. On the contrary, in the rhizospheric soil microorganisms belonging to the phylum Proteobacteria were abundant, evidencing that roots have a selective effect on the rhizospheric communities. In order to analyze possible indicators of biological contamination, a functional potential analysis was performed. The results point to a co-selection of the mechanisms of resistance to Hg and the mechanisms of resistance to antibiotics or other toxic compounds in environments contaminated by Hg. Likewise, the finding of antibiotic resistance mechanisms typical of the human clinic, such as resistance to beta-lactams and glycopeptics (vancomycin), suggests that these environments can behave as reservoirs. The sequences involved in Hg resistance (operon mer and efflux pumps) have a similar abundance in both soil types. However, the response to abiotic stress (salinity, desiccation, and contaminants) is more prevalent in rhizospheric soil. Finally, sequences involved in nitrogen fixation and metabolism and plant growth promotion (PGP genes) were identified, with higher relative abundances in rhizospheric soils. These findings can be the starting point for the targeted search for microorganisms suitable for further use in bioremediation processes in Hg-contaminated environments.

Implementation of Genetic Engineering and Novel Omics Approaches to Enhance Bioremediation: A Focused Review

Bioremediation itself is considered to be a cost effective soil clean-up technique and preferred over invasive physical and chemical treatments. Besides increasing efficiency, application of genetic engineering has led to reduction in the time duration required to achieve remediation, overcoming the so called 'Achilles heel' of Bioremediation. Omics technologies, namely genomics, transcriptomics, proteomics, and metabolomics, are being employed extensively to gain insights at genetic level. A wise synchronised application of these approaches can help scrutinize complex metabolic pathways, and molecular changes in response to heavy metal stress, and also its fate i.e., uptake, transport, sequestration and detoxification. In the present review, an account of some latest achievements made in the field is presented.

Cellular and genetic mechanism of bacterial mercury resistance and their role in biogeochemistry and bioremediation

Mercury (Hg) is a highly toxic element that occurs at low concentrations in nature. However, various anthropogenic and natural sources contribute around 5000 to 8000 metric tons of Hg per year, rapidly deteriorating the environmental conditions. Mercury-resistant bacteria that possess the mer operon system have the potential for Hg bioremediation through volatilization from the contaminated milieus. Thus, bacterial mer operon plays a crucial role in Hg biogeochemistry and bioremediation by converting both reactive inorganic and organic forms of Hg to relatively inert, volatile, and monoatomic forms. Both the broad-spectrum and narrow-spectrum bacteria harbor many genes of mer operon with their unique definitive functions. The presence of mer genes or proteins can regulate the fate of Hg in the biogeochemical cycle in the environment. The efficiency of Hg transformation depends upon the nature and diversity of mer genes present in mercury-resistant bacteria. Additionally, the bacterial cellular mechanism of Hg resistance involves reduced Hg uptake, extracellular sequestration, and bioaccumulation. The presence of unique physiological properties in a specific group of mercury-resistant bacteria enhances their bioremediation capabilities. Many advanced biotechnological tools also can improve the bioremediation efficiency of mercury-resistant bacteria to achieve Hg bioremediation.

Bioreduction and bioremoval of hexavalent chromium by genetically engineered strains (Escherichia coli MT2A and Escherichia coli MT3)

The number of studies on the removal of hazardous metals from water using genetic engineering technologies is growing. A high rate of metal ion removal from the environment is ensured, particularly through the expression of cysteine and thiol-rich proteins such as metallothioneins in bacterial cells. In this study, we used recombinant strains created by cloning the human metallothioneins MT2A and MT3 into Escherichia coli Jm109 to assess the removal and reduction of hexavalent chromium (Cr(VI)) from aqueous solutions. MT2A was the most effective strain in both Cr(VI) removal (89% in 25 mg/L Cr(VI)) and Cr(VI) reduction (76% in 25 mg/L Cr(VI)). The amount of Cr adsorbed per dry cell by the MT2A strain was 22 mg/g. The biosorption of total Cr was consistent with the Langmuir isotherm model. Scanning electron microscope (SEM) images revealed that the morphological structures of Cr(VI)-treated cells were significantly damaged when compared to control cells. Scanning transmission electron microscope (STEM) images showed black spots in the cytoplasm of cells treated with Cr(VI). Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the cells treated with Cr(VI) showed that the groups interacting with Cr were hydroxyl, amine, amide I, amide II, phosphoryl and carbonyl. When all of the experimental data was combined, it was determined that both MT2A and MT3 were effective in removing Cr(VI) from aqueous solutions, but MT2A was more effective, indicating that MT2A may be employed as a biotechnological tool.

Trends in microbial degradation and bioremediation of emerging contaminants

Modernization and modern ways of living demands more improved products from pharmaceuticals, cosmetics, and food processing industries. Moreover, industries like pesticides, fertilizers, dyeing, paints, detergent etc., also needs improvised products as per demand. As the new product emerges, the pollutants from these industries also constitute new type of danger to the environment and serious health risks to the living organisms. These emerging contaminants (ECs) are from different category of sources such as personal care products (PCPs), pharmaceuticals (Phcs), endocrine disrupting chemicals (EDCs), etc. These ECs can easily escape from the conventional water treatment and eventually get discharged in to the surface water and thus enters in to the ground water, soil, sediments, and also into the oceans. When these contaminants emerge we also require progress in tremendous process for preventing these hazardous chemicals by effective removal and treatment. For the past 50 years, both developed and developing countries are working on this treatment process and found that Microbial degradation and bioremediation are very useful for effective treatment to prevent their emissions. This treatment can be designed for any sort of ECs since the microbial members are so versatile to redesign their metabolic pathways when subject to exposure. However, implementing bioremediation is not alone efficient to degrade ECs and hence, combination of bioremediation, nanotechnology and physical treatment method will also provide sustainable, potent and fast degradation process. In this Book Chapter, we discuss in detail about the ECs, sources of microbial degradation process and its usefulness in the bioremediation of these ECs.

Plant Growth-Promoting Rhizobacteria as a Green Alternative for Sustainable Agriculture

Environmental stress is a major challenge for sustainable food production as it reduces yield by generating reactive oxygen species (ROS) which pose a threat to cell organelles and biomolecules such as proteins, DNA, enzymes, and others, leading to apoptosis. Plant growth-promoting rhizobacteria (PGPR) offers an eco-friendly and green alternative to synthetic agrochemicals and conventional agricultural practices in accomplishing sustainable agriculture by boosting growth and stress tolerance in plants. PGPR inhabit the rhizosphere of soil and exhibit positive interaction with plant roots. These organisms render multifaceted benefits to plants by several mechanisms such as the release of phytohormones, nitrogen fixation, solubilization of mineral phosphates, siderophore production for iron sequestration, protection against various pathogens, and stress. PGPR has the potential to curb the adverse effects of various stresses such as salinity, drought, heavy metals, floods, and other stresses on plants by inducing the production of antioxidant enzymes such as catalase, peroxidase, and superoxide dismutase. Genetically engineered PGPR strains play significant roles to alleviate the abiotic stress to improve crop productivity. Thus, the present review will focus on the impact of PGPR on stress resistance, plant growth promotion, and induction of antioxidant systems in plants.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Efficiency of bacteria and bacterial assisted phytoremediation of heavy metals: An update

The aim of this review to address the plant-associated bacteria to enhance the phytoremediation efficiency of the heavy metals from polluted sites and it is also highlighted advances for the application in wastewater treatment. Plant-associated bacteria have potential to encourage the plant growth and resistance under stress conditions. Such bacteria could enhance plant growth by controlling growth hormone, nutrition security, producing siderophore, secondary metabolites, and improving the antioxidant enzymes system. This review also explores the concepts and applications of bacteria assisted phytoremediation, addressing aspects that affect phytoremediation and pathways for restoration. Significant review issues relating to production and application of bacteria for improvement of bioremediation were established and presented for possible future research. Bacteria assisted phytoremediation is cost-effective strategy and metal sequestration mechanism that hold high metal biosorption capacities. This also takes into consideration the current state of technology implementations and proposals for prospective clean-up studies.

Transcription profiling-guided remodeling of sulfur metabolism in synthetic bacteria for efficiently capturing heavy metals

Heavy metal contamination is becoming a global problem threatening human health. Heavy metal removal by engineered microbes by cellular adsorption and uptake is a promising strategy for treatment of heavy metal contamination. However, this strategy is confronted with limited heavy metal-capturing elements. In this study, we performed a transcription profiling-guided strategy for construction of heavy metal-capturing synthetic bacteria. Transcription profiling of a heavy metal-tolerating Cupriavidus taiwanensis strain revealed up-regulation of sulfur metabolism-related operons (e.g., iscSAU and moaEDAB) by Pb²⁺ and Cd²⁺. A synthetic Escherichia coli strain, EcSSMO, was constructed by design of a synthetic sulfur metabolism operon (SSMO) based on iscSAU/moaEDAB. Biochemical analysis and X-ray photoelectron spectroscopy (XPS) revealed that the synthetic bacteria had remodeled sulfur metabolism and enhanced heavy metal-tolerating capacity, with higher surviving EcSSMO cells than the surviving control cells Ec0 (not containing SSMO) at 50 mg/L of Pb²⁺ and Cd²⁺ (>92 % versus <10 %). Moreover, EcSSMO exhibited much higher heavy metal-capturing capacity than Ec0, removing>90 % of Pb²⁺ and Cd²⁺ at 5 mg/L of Pb²⁺ and Cd²⁺, and >40 % of both heavy metals even at 50 mg/L of Pb²⁺ and Cd²⁺. This study reveals emphasizes feasibility of transcription profiling-guided construction of synthetic organisms by large-scale remodeling metabolic network.

Bacilli-Mediated Degradation of Xenobiotic Compounds and Heavy Metals

Xenobiotic compounds are man-made compounds and widely used in dyes, drugs, pesticides, herbicides, insecticides, explosives, and other industrial chemicals. These compounds have been released into our soil and water due to anthropogenic activities and improper waste disposal practices and cause serious damage to aquatic and terrestrial ecosystems due to their toxic nature. The United States Environmental Protection Agency (USEPA) has listed several toxic substances as priority pollutants. Bacterial remediation is identified as an emerging technique to remove these substances from the environment. Many bacterial genera are actively involved in the degradation of toxic substances. Among the bacterial genera, the members of the genus Bacillus have a great potential to degrade or transform various toxic substances. Many Bacilli have been isolated and characterized by their ability to degrade or transform a wide range of compounds including both naturally occurring substances and xenobiotic compounds. This review describes the biodegradation potentials of Bacilli toward various toxic substances, including 4-chloro-2-nitrophenol, insecticides, pesticides, herbicides, explosives, drugs, polycyclic aromatic compounds, heavy metals, azo dyes, and aromatic acids. Besides, the advanced technologies used for bioremediation of environmental pollutants using Bacilli are also briefly described. This review will increase our understanding of Bacilli-mediated degradation of xenobiotic compounds and heavy metals.

Microalgal Metallothioneins and Phytochelatins and Their Potential Use in Bioremediation

The persistence of heavy metals (HMs) in the environment causes adverse effects to all living organisms; HMs accumulate along the food chain affecting different levels of biological organizations, from cells to tissues. HMs enter cells through transporter proteins and can bind to enzymes and nucleic acids interfering with their functioning. Strategies used by microalgae to minimize HM toxicity include the biosynthesis of metal-binding peptides that chelate metal cations inhibiting their activity. Metal-binding peptides include genetically encoded metallothioneins (MTs) and enzymatically produced phytochelatins (PCs). A number of techniques, including genetic engineering, focus on increasing the biosynthesis of MTs and PCs in microalgae. The present review reports the current knowledge on microalgal MTs and PCs and describes the state of art of their use for HM bioremediation and other putative biotechnological applications, also emphasizing on techniques aimed at increasing the cellular concentrations of MTs and PCs. In spite of the broad metabolic and chemical diversity of microalgae that are currently receiving increasing attention by biotechnological research, knowledge on MTs and PCs from these organisms is still limited to date.

Photosynthetic bacteria-based technology is a potential alternative to meet sustainable wastewater treatment requirement?

A paradigm shift is underway in wastewater treatment from pollution removal to resource or energy recovery. However, conventional activated sludge (CAS) as the core technology of wastewater treatment is confronted with severe challenges on high energy consumption, sludge disposal and inevitable greenhouse gas emission, which are posing a serious impact on the current wastewater industry. It is urgent to find new alternative methods to remedy these defects. Photosynthetic bacteria (PSB) have flexible metabolic modes and high tolerance, which enhance the removal of nutrients, heavy metals and organic contaminants efficiency in different wastewater. The unique phototrophic growth of PSB breaks the restriction of nutrient metabolism in the CAS system. Recent studies have shown that PSB-based technologies can not only achieve the recovery of nutrient and energy, but also improve the degradation efficiency of refractory substances. If the application parameters can be determined, there will be great prospects and economic effects. This review summarizes the research breakthroughs and application promotion of PSB-based wastewater treatment technology in recent years. Comparing discussed the superiority and inferiority from the perspective of application range, performance differences and recovery possibility. Pathways involved in the nutrient substance and the corresponding influencing parameters are also described in detail. The mode of PSB biodegradation processes presented a promising alternative for new wastewater treatment scheme. In the future, more mechanical and model studies, deterministic operating parameters, revolutionary process design is need for large-scale industrial promotion of PSB-based wastewater treatment.

Removal of mercury(II), lead(II) and cadmium(II) from aqueous solutions using Rhodobacter sphaeroides SC01

Microorganisms and microbial products can be highly efficient in uptaking soluble and particulate forms of heavy metals, particularly from solutions. In this study, the removal efficiency, oxidative damage, antioxidant system, and the possible removal mechanisms were investigated in Rhodobacter (R.) sphaeroides SC01 under mercury (Hg), lead (Pb) and cadmium (Cd) stress. The results showed that SC01 had the highest removal rates (98%) of Pb among three heavy metals. Compared with Hg and Cd stress, Pb stress resulted in a lower levels of reactive oxygen species (ROS) and cell death. In contrast, the activities of four antioxidant enzymes in SC01 under Pb stress was higher than that of Hg and Cd stress. Furthermore, the analysis from fourier transform infrared spectroscopy indicated that complexation of Pb with hydroxyl, amid and phosphate groups was found in SC01 under Pb stress. In addition, X-ray diffraction analysis showed that precipitate of lead phosphate hydroxide was produced on the cell surface in SC01 exposed to Pb stress. Therefore, these results suggested that SC01 had good Pb removal ability by biosorption and precipitation and will be potentially useful for removal of Pb in industrial effluents.

Understanding the molecular mechanisms for the enhanced phytoremediation of heavy metals through plant growth promoting rhizobacteria: A review

Rapid industrialization, modern agricultural practices and other anthropogenic activities add a significant quantity of toxic heavy metals into the environment, which induces severe toxic effects on all form of living organisms, alter the soil properties and its biological activity. Remediation of heavy metal contaminated sites has become an urgent necessity. Among the existing strategies, phytoremediation is an eco-friendly and much convincing tool for the remediation of heavy metals. However, the applicability of phytoremediation in contaminated sites is restricted by two prime factors such as i) slow growth rate at higher metal contaminated sites and ii) metal bioavailability. This circumstance could be minimized and accelerate the phytoremediation efficiency by incorporating the potential plant growth promoting rhizobacterial (PGPR) as a combined approach. PGPR inoculation might improve the plant growth through the production of plant growth promoting substances and improve the heavy metal remediation efficiency by the secretion of chelating agents, acidification and redox changes. Moreover, rhizobacterial inoculation consolidates the metal tolerance and uptake by regulating the expression of various metal transporters, tolerant and metal chelator genes. However, the exact underlying molecular mechanism of PGPR mediated plant growth promotion and phytoremediation of heavy metals is poorly understood. Thus, the present review provides clear information about the molecular mechanisms excreted by PGPR strains in plant growth promotion and phytoremediation of heavy metals.

Heavy Metal Removal by Bioaccumulation Using Genetically Engineered Microorganisms

Wastewater effluents from mines and metal refineries are often contaminated with heavy metal ions, so they pose hazards to human and environmental health. Conventional technologies to remove heavy metal ions are well-established, but the most popular methods have drawbacks: chemical precipitation generates sludge waste, and activated carbon and ion exchange resins are made from unsustainable non-renewable resources. Using microbial biomass as the platform for heavy metal ion removal is an alternative method. Specifically, bioaccumulation is a natural biological phenomenon where microorganisms use proteins to uptake and sequester metal ions in the intracellular space to utilize in cellular processes (e.g., enzyme catalysis, signaling, stabilizing charges on biomolecules). Recombinant expression of these import-storage systems in genetically engineered microorganisms allows for enhanced uptake and sequestration of heavy metal ions. This has been studied for over two decades for bioremediative applications, but successful translation to industrial-scale processes is virtually non-existent. Meanwhile, demands for metal resources are increasing while discovery rates to supply primary grade ores are not. This review re-thinks how bioaccumulation can be used and proposes that it can be developed for bioextractive applications-the removal and recovery of heavy metal ions for downstream purification and refining, rather than disposal. This review consolidates previously tested import-storage systems into a biochemical framework and highlights efforts to overcome obstacles that limit industrial feasibility, thereby identifying gaps in knowledge and potential avenues of research in bioaccumulation.

Cell Surface Display of MerR on Saccharomyces cerevisiae for Biosorption of Mercury

The metalloregulatory protein MerR which plays important roles in mer operon system exhibits high affinity and selectivity toward mercury (II) (Hg²⁺). In order to improve the adsorption ability of Saccharomyces cerevisiae for Hg²⁺, MerR was displayed on the surface of S. cerevisiae for the first time with an α-agglutinin-based display system in this study. The merR gene was synthesized after being optimized and added restriction endonuclease sites EcoR I and Mlu I. The display of MerR was indirectly confirmed by the enhanced adsorption ability of S. cerevisiae for Hg²⁺ and colony PCR. The hydride generation atomic absorption spectrometry was applied to measure the Hg²⁺ content in water. The engineered yeast strain not only showed higher tolerance to Hg, but also their adsorption ability was much higher than that of origin and control strains. The engineered yeast could adsorb Hg²⁺ under a wide range of pH levels, and it could also adsorb Hg²⁺ effectively with Cd²⁺ and Cu²⁺ coexistence. Furthermore, the engineered yeast strain could adsorb ultra-trace Hg²⁺ effectively. The results above showed that the surface-engineered yeast strain could adsorb Hg²⁺ under complex environmental conditions and could be used for the biosorption and bioremediation of environmental Hg contaminants.

Stoichiometry and kinetics of mercury uptake by photosynthetic bacteria

Mercury adsorption on the cell surface and intracellular uptake by bacteria represent the key first step in the production and accumulation of highly toxic mercury in living organisms. In this work, the biophysical characteristics of mercury bioaccumulation are studied in intact cells of photosynthetic bacteria by use of analytical (dithizone) assay and physiological photosynthetic markers (pigment content, fluorescence induction, and membrane potential) to determine the amount of mercury ions bound to the cell surface and taken up by the cell. It is shown that the Hg(II) uptake mechanism (1) has two kinetically distinguishable components, (2) includes co-opted influx through heavy metal transporters since the slow component is inhibited by Ca²⁺ channel blockers, (3) shows complex pH dependence demonstrating the competition of ligand binding of Hg(II) ions with H⁺ ions (low pH) and high tendency of complex formation of Hg(II) with hydroxyl ions (high pH), and (4) is not a passive but an energy-dependent process as evidenced by light activation and inhibition by protonophore. Photosynthetic bacteria can accumulate Hg(II) in amounts much (about 10⁵) greater than their own masses by well-defined strong and weak binding sites with equilibrium binding constants in the range of 1 (μM)^-1 and 1 (mM)^-1, respectively. The strong binding sites are attributed to sulfhydryl groups as the uptake is blocked by use of sulfhydryl modifying agents and their number is much (two orders of magnitude) smaller than the number of weak binding sites. Biofilms developed by some bacteria (e.g., Rvx. gelatinosus) increase the mercury binding capacity further by a factor of about five. Photosynthetic bacteria in the light act as a sponge of Hg(II) and can be potentially used for biomonitoring and bioremediation of mercury-contaminated aqueous cultures.

Toward Bioremediation of Methylmercury Using Silica Encapsulated Escherichia coli Harboring the mer Operon

Mercury is a highly toxic heavy metal and the ability of the neurotoxin methylmercury to biomagnify in the food chain is a serious concern for both public and environmental health globally. Because thousands of tons of mercury are released into the environment each year, remediation strategies are urgently needed and prompted this study. To facilitate remediation of both organic and inorganic forms of mercury, Escherichia coli was engineered to harbor a subset of genes (merRTPAB) from the mercury resistance operon. Protein products of the mer operon enable transport of mercury into the cell, cleavage of organic C-Hg bonds, and subsequent reduction of ionic mercury to the less toxic elemental form, Hg(0). E. coli containing merRTPAB was then encapsulated in silica beads resulting in a biological-based filtration material. Performing encapsulation in aerated mineral oil yielded silica beads that were smooth, spherical, and similar in diameter. Following encapsulation, E. coli containing merRTPAB retained the ability to degrade methylmercury and performed similarly to non-encapsulated cells. Due to the versatility of both the engineered mercury resistant strain and silica bead technology, this study provides a strong foundation for use of the resulting biological-based filtration material for methylmercury remediation.

Purple non-sulfur photosynthetic bacteria monitor environmental stresses

Heavy metal ion pollution and oxygen deficiency are major environmental risks for microorganisms in aqueous habitat. The potential of purple non-sulfur photosynthetic bacteria for biomonitoring and bioremediation was assessed by investigating the photosynthetic capacity in heavy metal contaminated environments. Cultures of bacterial strains Rhodobacter sphaeroides, Rhodospirillum rubrum and Rubrivivax gelatinosus were treated with heavy metal ions in micromolar (Hg(2+)), submillimolar (Cr(6+)) and millimolar (Pb(2+)) concentration ranges. Functional assays (flash-induced absorption changes and bacteriochlorophyll fluorescence induction) and electron micrographs were taken to specify the harmful effects of pollution and to correlate to morphological changes of the membrane. The bacterial strains and functional tests showed differentiated responses to environmental stresses, revealing that diverse mechanisms of tolerance and/or resistance are involved. The microorganisms were vulnerable to the prompt effect of Pb(2+), showed weak tolerance to Hg(2+) and proved to be tolerant to Cr(6+). The reaction center controlled electron transfer in Rvx. gelatinosus demonstrated the highest degree of resistance against heavy metal exposure.

Acid-vacuo heat treated low cost banana stems fiber for efficient biosorption of Hg(ii)

HCl treatment on Banana Stem Fiber (BSF) increased the cellulose accessibility. Prior to the biosorption process, the biosorbent was activated in vacuo at 373 K. The activation improved the maximum Hg(ii) biosorption capacity from 28 to 372 mg g⁻¹.

Comparative study on Ni(2+)-affinity transport of nickel/cobalt permeases (NiCoTs) and the potential of recombinant Escherichia coli for Ni(2+) bioaccumulation

Comparative evaluation on Ni(2+)-uptake of two nickel-affinity transmembrane proteins (NiCoTs) respectively from Helocobacter pylori (NixA) and Staphylococcus aureus (NisA) was performed. Expression of NiCoTs alone did not promote Ni(2+) uptake of the recombinant strains and made the growth susceptible to Ni(2+). However, recombinant strains expressing both NiCoTs and Metallothionein (MT) showed enhanced tolerance to Ni(2+) and Ni(2+) uptake. The maximum Ni(2+)-uptake capacity of recombinant strain N1c expressing NixA+MT reached 83.33mgg(-1), higher than 45.45mgg(-1) of recombinant strain N1d expressing NisA+MT. N1c exhibited more effective Ni(2+) accumulation than N1d in the presence of Na(+), Co(2+) and Cd(2+). NiCoTs promoted intracellular Ni(2+) uptake of the recombinant strains. Phosphate groups dominated Ni(2+) binding of wild type Escherichia coli, but carboxyl groups contributed more for N1c and N1d. The result suggested that NixA has a higher specificity in Ni(2+) binding than NisA, and both NiCoTs and MT are important for Ni(2+) bioaccumulation.

Biochemical basis of mercury remediation and bioaccumulation by Enterobacter sp. EMB21

The aims of this study were to isolate metal bioaccumulating bacterial strains and to study their applications in removal of environmental problematic heavy metals like mercury. Five bacterial strains belonging to genera Enterobacter, Bacillus, and Pseudomonas were isolated from oil-spilled soil. Among these, one of the strains Enterobacter sp. EMB21 showed mercury bioaccumulation inside the cells simultaneous to its bioremediation. The bioaccumulation of remediated mercury was confirmed by transmission electron microscopy and energy dispersive X-ray. The mercury-resistant loci in the Enterobacter sp. EMB21 cells were plasmid-mediated as confirmed by transformation of mercury-sensitive Escherichia coli DH5α by Enterobacter sp. EMB21 plasmid. Effect of different culture parameters viz-a-viz inoculum size, pH, carbon, and nitrogen source revealed that alkaline pH and presence of dextrose and yeast extract favored better remediation. The results indicated the usefulness of Enterobacter sp. EMB21 for the effective remediation of mercury in bioaccumulated form. The Enterobacter sp. EMB21 seems promising for heavy metal remediation wherein the remediated metal can be trapped inside the cells. The process can further be developed for the synthesis of valuable high-end functional alloy, nanoparticles, or metal conjugates from the metal being remediated.

Isolation of marine bacteria highly resistant to mercury and their bioaccumulation process

The marine bacteria strains S1, S2 and S3, were isolated on seawater culturing medium containing Hg(2+), Cd(2+), Cr(6+) or Ni(2+) at concentrations of 20 mg L(-1) and more. The isolates showed tolerance to these heavy metals. S1 grew in the presence of 120 mg L(-1) of Hg(2+) and accumulated Hg(2+) at pH 4-10. For the effect of co-existing cations on bioaccumulation of target metal, it was found that the effect depended on not only the variety and initial concentration of co-existing ions, but also the initial concentration of target metal and biomass dosage. A new parameter, the ratio of remaining bioaccumulation capacity (RRBC) of biomass, was therefore defined to evaluate such effect. Furthermore, the mechanism evaluation revealed that S1 bound about 70% Hg(2+) on the cell surface, and carboxyl group played an important role in Hg(2+) binding.

The reaction center is the sensitive target of the mercury(II) ion in intact cells of photosynthetic bacteria

The sensitivity of intact cells of purple photosynthetic bacterium Rhodobacter sphaeroides wild type to low level (<100 μM) of mercury (Hg²⁺) contamination was evaluated by absorption and fluorescence spectroscopies of the bacteriochlorophyll-protein complexes. All assays related to the function of the reaction center (RC) protein (induction of the bacteriochlorophyll fluorescence, delayed fluorescence and light-induced oxidation and reduction of the bacteriochlorophyll dimer and energization of the photosynthetic membrane) showed prompt and later effects of the mercury ions. The damage expressed by decrease of the magnitude and changes of rates of the electron transfer kinetics followed complex (spatial and temporal) pattern according to the different Hg²⁺ sensitivities of the electron transport (donor/acceptor) sites including the reduced bound and free cytochrome c₂ and the primary reduced quinone. In contrast to the RC, the light harvesting system and the bc₁ complex demonstrated much higher resistance against the mercury pollution. The 850 and 875 nm components of the peripheral and core complexes were particularly insensitive to the mercury(II) ions. The concentration of the photoactive RCs and the connectivity of the photosynthetic units decreased upon mercury treatment. The degree of inhibition of the photosynthetic apparatus was always higher when the cells were kept in the light than in the dark indicating the importance of metabolism in active transport of the mercury ions from outside to the intracytoplasmic membrane. Any of the tests applied in this study can be used for detection of changes in photosynthetic bacteria at the early stages of the action of toxicants.