Synergistic conversion of glucose into 5-hydroxymethylfurfural in ionic liquid-water mixtures

Dehydration of Xylose to Furfural over Imidazolium-Based Ionic Liquid with Phase Separation

An environmentally friendly catalyst and task-specific ionic liquid (IL), 1-(4-sulfonic acid) butyl-3-cetyl-2-methyl imidazolium hydrogen sulfate, was applied to the dehydration of xylose to furfural. Its structure was determined by FT-IR, 1H NMR technologies. The solubility of IL in water changed with the temperature, and had the advantages of homogeneous and heterogeneous catalysts. At the given conditions, xylose conversion of 95.3% and furfural yield of 67.5% were achieved over IL.

A review on solid acid catalysis for sustainable production of levulinic acid and levulinate esters from biomass derivatives

Biomass is a kind of renewable and abundant resource that can be seen as an important candidate to solve the energy crisis. Levulinic acid (LA) and levulinate esters (LEs) have been widely researched as biomass-based platform compounds. In recent years, efficient, green, and environment-friendly solid acid catalysts have been developed for the fast production and resolution of the problems, such as low yield, high equipmental requirements, and difficulty in product separation, in the preparation of LA and LE from biomass. In this paper, the preparation routes of LA and LEs from various raw materials are introduced, and the solid acid catalysts involved in their production are emphatically reviewed. The challenges and prospects in LA and LE production from biomass are proposed to achieve a more economical and energy efficient process with the concept of sustainable development in the future.

Furfural and 5-Hydroxymethylfurfural Production from Sugar Mixture Using Deep Eutectic Solvent/MIBK System

Choline chloride (ChCl) / glycolic acid (GA) deep eutectic solvent (DES) media with high water content but without any additional catalyst are introduced in furfural and 5-hydroxymethylfurfural (HMF) production. The effects of water content, reaction time, and reaction temperature are investigated with two feedstocks: a glucose/xylose mixture and birch sawdust. Based on the results, 10 equivalent quantities of water (32.9 wt.%) were revealed to be beneficial for conversions without rupturing the DES structure. The optimal reaction conditions were 160 °C and 10 minutes for the sugar mixture and 170 °C and 10 minutes for birch sawdust in a microwave reactor. High furfural yields were achieved, namely 62 % from the sugar mixture and 37.5 % from birch sawdust. HMF yields were low, but since the characterization of the solid residue of sawdust, after DES treatment, was revealed to contain only cellulose (49 %) and lignin (52 %), the treatment could be potentially utilized in a biorefinery concept where the main products are obtained from the cellulose fraction. Extraction of products into the organic phase (methyl isobutyl ketone, MIBK) during the reaction enabled the recycling of the DES phase, and yields remained high for three runs of recycling.

Heterogeneous Ru Catalysts as the Emerging Potential Superior Catalysts in the Selective Hydrogenation of Bio-Derived Levulinic Acid to γ-Valerolactone: Effect of Particle Size, Solvent, and Support on Activity, Stability, and Selectivity

Catalytic hydrogenation of a biomass-derived molecule, levulinic acid (LA), to γ-valerolactone (GVL) has been getting much attention from researchers across the globe recently. This is because GVL has been identified as one of the potential molecules for replacing fossil fuels. For instance, GVL can be catalytically converted into liquid alkenes in the molecular weight range close to that found in transportation fuels via a process that does not require an external hydrogen source. Noble and non-noble metals have been used as catalysts for the selective hydrogenation of LA to GVL. Of these, Ru has been reported to be the most active metal for this reaction. The type of metal supports and solvents has been proved to affect the activity, selectivity, and yields of GVL. Water has been identified as a potential, effective “green” solvent for the hydrogenation of LA to GVL. The use of different sources of H2 other than molecular hydrogen (such as formic acid) has also been explored. In a few instances, the product, GVL, is hydrogenated further to other useful products such as 1,4-pentanediol (PD) and methyl tetrahydrofuran (MTHF). This review selectively focuses on the potential of immobilized Ru catalysts as a potential superior catalyst for selective hydrogenation of LA to GVL.

Conversion of Glucose to 5-Hydroxymethylfurfural, Levulinic Acid, and Formic Acid in 1,3-Dibutyl-2-(2-butoxyphenyl)-4,5-diphenylimidazolium Iodide-Based Ionic Liquid

The separation process between 5-hydroxymethylfurfural (HMF) and trace glucose in glucose conversion is important in the biphasic system (aqueous–organic phase), due to the partial solubility property of HMF in water. In addition, the yield of HMF via the dehydration reaction of glucose in water is low (under 50%) with the use of Brønsted acid as a catalyst. Therefore, this study was conducted to optimize the production and separation of products by using a new hydrophobic ionic liquid (IL), which is more selective than water. The new IL (1,3-dibutyl-2-(2-butoxyphenyl)-4,5-diphenyl imidazolium iodide) [DBDIm]I was used as a solvent and was optimized for the dehydration reaction of glucose to make a more selective separation of HMF, levulinic acid (LA), and formic acid (FA). [DBDIm]I showed high performance as a solvent for glucose conversion at 100 °C for 120 min, with a yield of 82.2% HMF, 14.9% LA, and 2.9% FA in the presence of sulfuric acid as the Brønsted acid catalyst.

The Proton Dissociation of Bio-Protic Ionic Liquids: [AAE]X Amino Acid Ionic Liquids

[AAE]X composed of amino acid ester cations is a sort of typically “bio-based” protic ionic liquids (PILs). They possess potential Brønsted acidity due to the active hydrogens on their cations. The Brønsted acidity of [AAE]X PILs in green solvents (water and ethanol) at room temperature was systematically studied. Various frameworks of amino acid ester cations and four anions were investigated in this work from the viewpoint of structure–property relationship. Four different ways were used to study the acidity. Acid dissociation constants (pK_a) of [AAE]X determined by the OIM (overlapping indicator method) were from 7.10 to 7.73 in water and from 8.54 to 9.05 in ethanol. The pK_a values determined by the PTM (potential titration method) were from 7.12 to 7.82 in water. Their Hammett acidity function (H₀) values (0.05 mol·L⁻¹) were about 4.6 in water. In addition, the pK_a values obtained by the DFT (proton-transfer reactions) were from 7.11 to 7.83 in water and from 8.54 to 9.34 in ethanol, respectively. The data revealed that the cationic structures of [AAE]X had little effect and the anions had no effect on the acidity of [AAE]X. At the same time, the OIM, PTM, Hammett method and DFT method were reliable for determining the acidic strength of [AAE]X in this study.

Furfural Hydrogenation on Modified Niobia

In this study, niobia-based materials have been used as supports for Pt nanoparticles and used in the hydrogenation of furfural. The incorporation of dopants (W6+ and Ti4+) in the Nb2O5 structure induced modifications in the surface acidity of the support; in particular, the addition of W6+ increased the amount of Lewis acid sites, while the addition of Ti4+ decreased the number of Lewis acid sites. As a result, the catalytic activity towards the hydrogenation of furfural was affected; high surface acidity resulted in high catalytic activity. The selectivity of the reaction changed with the support acidity as well, with higher amount of furfuryl alcohol produced decreasing the Lewis acid sites.

Ruthenium on Carbonaceous Materials for the Selective Hydrogenation of HMF

We report the use of Ru catalysts supported in the activated carbon (AC) and carbon nanofibers (CNFs) for the selective production of liquid fuel dimethylfuran (DMF) and fuel additives alkoxymethyl furfurals (AMF). Parameters such as the reaction temperature and hydrogen pressure were firstly investigated in order to optimise the synthesis of the desired products. Simply by using a different support, the selectivity of the reaction drastically changed. DMF was produced with AC as support, while a high amount of AMF was produced when CNFs were employed. Moreover, the reusability of the catalysts was tested and deactivation phenomena were identified and properly addressed. Further studies need to be performed in order to optimise the stability of the catalysts.

"Solvent-in-salt" systems for design of new materials in chemistry, biology and energy research

Inorganic and organic "solvent-in-salt" (SIS) systems have been known for decades but have attracted significant attention only recently. Molten salt hydrates/solvates have been successfully employed as non-flammable, benign electrolytes in rechargeable lithium-ion batteries leading to a revolution in battery development and design. SIS with organic components (for example, ionic liquids containing small amounts of water) demonstrate remarkable thermal stability and tunability, and present a class of admittedly safer electrolytes, in comparison with traditional organic solvents. Water molecules tend to form nano- and microstructures (droplets and channel networks) in ionic media impacting their heterogeneity. Such microscale domains can be employed as microreactors for chemical and enzymatic synthesis. In this review, we address known SIS systems and discuss their composition, structure, properties and dynamics. Special attention is paid to the current and potential applications of inorganic and organic SIS systems in energy research, chemistry and biochemistry. A separate section of this review is dedicated to experimental methods of SIS investigation, which is crucial for the development of this field.

The Highly Selective and Near-Quantitative Conversion of Glucose to 5-Hydroxymethylfurfural Using Ionic Liquids

A number of ionic liquids have been shown to be excellent solvents for lignocellulosic biomass processing, and some of these are particularly effective in the production of the versatile chemical building block 5-hydroxymethylfurfural (HMF). In this study, the production of HMF from the simple sugar glucose in ionic liquid media is discussed. Several aspects of the selective catalytic formation of HMF from glucose have been elucidated using metal halide salts in two distinct ionic liquids, 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium hydrogen sulfate as well as mixtures of these, revealing key features for accelerating the desired reaction and suppressing byproduct formation. The choice of ionic liquid anion is revealed to be of particular importance, with low HMF yields in the case of hydrogen sulfate-based salts, which are reported to be effective for HMF production from fructose. The most successful system investigated in this study led to almost quantitative conversion of glucose to HMF (90% in only 30 minutes using 7 mol% catalyst loading at 120°C) in a system which is selective for the desired product, has low energy intensity and is environmentally benign.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Heterogeneous Catalytic Conversion of Biobased Chemicals into Liquid Fuels in the Aqueous Phase

Different biobased chemicals are produced during the conversion of biomass into fuels through various feasible technologies (e.g., hydrolysis, hydrothermal liquefaction, and pyrolysis). The challenge of transforming these biobased chemicals with high hydrophilicity is ascribed to the high water content of the feedstock and the inevitable formation of water. Therefore, aqueous-phase processing is an interesting technology for the heterogeneous catalytic conversion of biobased chemicals. Different reactions, such as dehydration, isomerization, aldol condensation, ketonization, and hydrogenation, are applied for the conversion of sugars, furfural/hydroxymethylfurfural, acids, phenolics, and so on over heterogeneous catalysts. The activity, stability, and reusability of the heterogeneous catalysts in water are summarized, and deactivation processes and several strategies are introduced to improve the stability of heterogeneous catalysts in the aqueous phase.

Selective Aerobic Oxidation of 5-(Hydroxymethyl)furfural to 5-Formyl-2-furancarboxylic Acid in Water

A simple, cheap, and selective catalyst based on copper/cerium oxides is described for the oxidation of 5-(hydroxymethyl)furfural (5-HMF) in water. An almost quantitative conversion (99 %) with excellent (90 %) selectivity towards the formation of 5-formyl-2-furancarboxylic acid, a platform molecule for other high value chemicals, is observed. The catalyst does not require any pretreatment or additives, such as bases, to obtain high yield and selectivity in water as solvent and using oxygen as oxidant. When a physical mixture of the oxides is used, low conversion and selectivity are observed. Air can be used instead of oxygen, but a lower conversion rate is observed if the same overall pressure is used, and the selectivity remains high. The catalyst can be recovered almost quantitatively and reused. Deactivation of the catalyst, observed in repeated runs, is due to the deposition of humins on its surface. Upon calcination the catalyst almost completely recovers its activity and selectivity, proving that the catalyst is robust.

Direct Observation of Self-Organized Water-Containing Structures in the Liquid Phase and Their Influence on 5-(Hydroxymethyl)furfural Formation in Ionic Liquids

Water-containing organic solutions are widespread reaction media in organic synthesis and catalysis. This type of multicomponent liquid system has a number of unique properties because of the tendency for water to self-organize in mixtures with other liquids. The characterization of these water domains is a challenging task because of their soft and dynamic nature. In the present study, the morphology and dynamics of micrometer- and nanometer-scale water-containing compartments in ionic liquids were directly observed by electron microscopy. A variety of morphologies, including isolated droplets, dense structures, aggregates, and 2D meshworks, have been experimentally detected and studied. Using the developed method, the impact of water on the acid-catalyzed biomass conversion reaction was studied at the microscopic level. The process that produced nanostructured domains in solution led to better yields and higher selectivities compared with reactions involving the bulk system.

Insights into the solvation of glucose in water, dimethyl sulfoxide (DMSO), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF) and its possible implications on the conversion of glucose to platform chemicals

The presence of co-solvents, like DMSO, DMF and THF, significantly alters (i) the interaction of glucose with water, (ii) the mobility of glucose and (iii) its bonding with the solvent environment. This may have implications on glucose conversion reactions.

5-(Hydroxymethyl)-2-furaldehyde Inhibits Adipogenic and Enhances Osteogenic Differentiation of Rat Bone Mesenchymal Stem Cells

Eucommiae Cortex (Eucommia ulmoides Oliver Bark) has been used for anti-osteoporosis usually as an ethnic drug for hundred years in China. In this study, a bioactive compound, 5-(hydroxymethyl)-2-furaldehyde (5-HMF), was isolated from Eucommiae Cortex. We found that after rat bone mesenchymal stem cells (bMSCs) were induced by 5-HMF at the concentration of 0.05, 0.10 and 0.20 μg/mL in the normal medium for 7 and 14 days, the mRNA expression of ALP, COLlαl (7 days only), OCN and OPN increased. However, in the adipogenic induction medium (AIM), the mRNA expression of PPARγ, FABP4, C/EBPα and LPL decreased with the 5-HMF treatment. Mineralized nodule formations were enhanced after bMSCs were induced by 5-HMF for 14 and 21 days in normal medium. In the AIM medium, 5-HMF not only inhibited the formation of adipose cells obviously, but also stimulated the mineralized nodule formation after induced for 21 days. These results indicated that 5-HMF was a powerful inhibitor of adipogenesis and enhancer of osteoblastogenesis. It may be one of the constituents contributing to anti-osteoporosis in Eucommiae Cortex.

Conversion of Glucose to 5-hydroxymethylfurfural with Tetraethylammonium Bromide and Chromium (III) Chloride as Catalysts

Tetraethylammonium bromide (TEAB) and chromium (III) chloride (CrCl3) were used synergistically to catalyze the conversion of glucose to 5-hydroxymethylfurfural (HMF). The effects of solvent, catalyst loading, reaction temperature and reaction time on the HMF yields were investigated. The results indicated that using 70 mol% TEAB and 12 mol% CrCl3 in a 10 wt% fructose solution in N,N-dimethylacetamide (DMAC) gave the highest HMF yield of 72.7 % after 90 min at 120 °C

Chromium(0) nanoparticles as effective catalyst for the conversion of glucose into 5-hydroxymethylfurfural

It's nano: Small and uniform chromium nanoparticles, either preformed or generated in situ, effectively catalyze the conversion of glucose into 5-hydroxymethyl furfural. The results compare favorably with those achieved by using a catalyst system based on divalent CrCl(2) in ionic liquids (ILs). In addition, the chromium nanoparticles are found in the CrCl(2)/IL system, and the implications of their presence in that system is investigated.