Synthesis of Fe3O4 poly(styrene-glycidyl methacrylate) magnetic porous microspheres and application in the immobilization of Klebsiella sp. FD-3 to reduce Fe(III)EDTA in a NO(x) scrubbing solution

Magnetic porous microspheres enhancing the anaerobic digestion of sewage sludge: Synergistic free and attached methanogenic consortia

The addition of exogenous materials is a commonly reported method for promoting the anaerobic digestion (AD) of sludge. However, most exogenous materials are nano-sized and their use encounters problems relating to a need for continuous replenishment, uncontrollability and non-recyclability. Here, magnetic porous microspheres (MPMs), which can be controlled by magnetic forces, were prepared and used to enhance the methanogenesis of sludge. It was observed that the MPMs were spherical particles with diameters of approximately 100 µm and had a stable macroporous hybrid structure of magnetic cores and polymeric shells. Furthermore, the MPMs had good magnetic properties and a strong solid-liquid interfacial electron transfer ability, suggesting that MPMs are excellent carriers for methanogenic consortia. Experimental results showed that the addition of MPMs increased methane production and the proportion of methane in biogas from AD by 100.0 % and 21.2 %, respectively, indicating the MPMs notably enhanced the methanogenesis of sludge. Analyses of variations in key enzyme activities and electron transfer in sludge samples with and without MPMs in AD revealed that the MPMs significantly enhanced the activities of key enzymes involved in hydrolysis, acidification and methanation. This was achieved mainly by enhancing the extracellular electron transfer to strengthen the proton motive force on the cell membrane, which provides more energy generation for methanogenic metabolism. A careful examination of the variations in the morphology, pore structure and magnetism of the MPMs before and after AD revealed that the MPMs increased the prevalence of many highly active anaerobes, and that this did not weaken the magnetic performance. The microbial community structure and metatranscriptomic analysis further indicated that the acetotrophic methanogens (i.e., Methanosaeta) were mainly in a free state and that CO2-reducing methanogens (i.e., Methanolinea and Methanobacterium) mainly adhered to the MPMs. The above synergistic metabolism led to efficient methanogenesis, which indicates that the MPMs optimised the spatial ecological niche of methanogenic consortia. These findings provide an important reference for the development of magnetic porous materials promoting AD.

A review: Biological technologies for nitrogen monoxide abatement

Nitrogen oxides (NOx), including nitrogen monoxide (NO) and nitrogen dioxide (NO2), are among the most important global atmospheric pollutants because they have a negative impact on human respiratory health, animals, and the environment through the greenhouse effect and ozone layer destruction. NOx compounds are predominantly generated by anthropogenic activities, which involve combustion processes such as energy production, transportation, and industrial activities. The most widely used alternatives for NOx abatement on an industrial scale are selective catalytic and non-catalytic reductions; however, these alternatives have high costs when treating large air flows with low pollutant concentrations, and most of these methods generate residues that require further treatment. Therefore, biotechnologies that are normally used for wastewater treatment (based on nitrification, denitrification, anammox, microalgae, and combinations of these) are being investigated for flue gas treatment. Most of such investigations have focused on chemical absorption and biological reduction (CABR) systems using different equipment configurations, such as biofilters, rotating reactors, or membrane reactors. This review summarizes the current state of these biotechnologies available for NOx treatment, discusses and compares the use of different microorganisms, and analyzes the experimental performance of bioreactors used for NOx emission control, both at the laboratory scale and in industrial settings, to provide an overview of proven technical solutions and biotechnologies for NOx treatment. Additionally, a comparative assessment of the advantages and disadvantages is performed, and special challenges for biological technologies for NO abatement are presented.

Immobilized penicillin G acylase with enhanced activity and stability using glutaraldehyde-modified polydopamine-coated Fe3 O4 nanoparticles

In this work, Fe₃ O₄ nanoparticles (NPs) were coated with polydopamine (PDA) to structure Fe₃ O₄ @PDA NPs by the spontaneous oxygen-mediated self-polymerization of dopamine (DA) in an aqueous solution of pH = 8.5. The fabricated Fe₃ O₄ @PDA NPs were grafted by glutaraldehyde to realize the immobilization of penicillin G acylase (PGA) under mild conditions. The carriers of each stage were characterized and investigated by transmission electron microscopy, X-ray diffraction, Fourier transform infrared, and vibrating sample magnetometry. To improve the catalytic activity and stability of immobilized PGA, the immobilization conditions were investigated and optimized. Under the optimal immobilization conditions, the enzyme loading capacity, enzyme activity, and enzyme activity recovery of immobilized PGA were 114 mg/g, 26,308 U/g, and 78.5%, respectively. In addition, the immobilized PGA presented better temperature and pH stability compared with free PGA. The reusability study ensured that the immobilized PGA showed an excellent repeating application performance. In particular, the recovery rate of immobilized PGA could reach 94.8% and immobilized PGA could retain 73.0% of its original activity after 12 cycles, indicating that the immobilized PGA exhibited a high operation stability and broad application potential in the biocatalysis field.

Recent Breakthroughs and Advancements in NOx and SOx Reduction Using Nanomaterials-Based Technologies: A State-of-the-Art Review

Nitrogen and sulpher oxides (NO_x, SO_x) have become a global issue in recent years due to the fastest industrialization and urbanization. Numerous techniques are used to treat the harmful exhaust emissions, including dry, traditional wet and hybrid wet-scrubbing techniques. However, several difficulties, including high-energy requirement, limited scrubbing-liquid regeneration, formation of secondary pollutants and low efficiency, limit their industrial utilization. Regardless, the hybrid wet-scrubbing technology is gaining popularity due to low-costs, less-energy consumption and high-efficiency removal of air pollutants. The removal/reduction of NO_x and SO_x from the atmosphere has been the subject of several reviews in recent years. The goal of this review article is to help scientists grasp the fundamental ideas and requirements before using it commercially. This review paper emphasizes the use of green and electron-rich donors, new breakthroughs, reducing GHG emissions, and improved NO_x and SO_x removal catalytic systems, including selective/non-catalytic reduction (SCR/SNCR) and other techniques (functionalization by magnetic nanoparticles; NP, etc.,). It also explains that various wet-scrubbing techniques, synthesis of solid iron-oxide such as magnetic (Fe₃O₄) NP are receiving more interest from researchers due to the wide range of its application in numerous fields. In addition, EDTA coating on Fe₃O₄ NP is widely used due to its high stability over a wide pH range and solid catalytic systems. As a result, the Fe₃O₄@EDTA-Fe catalyst is projected to be an optimal catalyst in terms of stability, synergistic efficiency, and reusability. Finally, this review paper discusses the current of a heterogeneous catalytic system for environmental remedies and sustainable approaches.

Selenium catalyzed Fe(III)-EDTA reduction by Na2SO3: a reaction-controlled phase transfer catalysis

Fe(II)-EDTA, a typical chelated iron, is able to coordinate with nitric oxide (NO) which accelerates the rates and kinetics of the absorption of flue gas. However, Fe(II)-EDTA can be easily oxidized to Fe(III)-EDTA which is unable to absorb NO. Therefore, the regeneration of fresh Fe(II)-EDTA, which actually is the reduction of Fe(III)-EDTA to Fe(II)-EDTA, becomes a crucial step in the denitrification process. To enhance the reduction rate of Fe(III)-EDTA, selenium was introduced into the SO3 (2-)/Fe(III)-EDTA system as catalyst for the first time. By comparison, the reduction rate was enhanced by four times after adding selenium even at room temperature (25 °C). Encouragingly, elemental Se could precipitate out when SO3 (2-) was consumed up by oxidation to achieve self-separation. A catalysis mechanism was proposed with the aid of ultraviolet-visible (UV-Vis) spectroscopy, Tyndall scattering, horizontal attenuated total reflection Fourier transform infrared (HATR-FTIR) spectroscopy, and X-ray diffraction (XRD). In the catalysis process, the interconversion between SeSO3 (2-) and nascent Se formed a catalysis circle for Fe(III)-EDTA reduction in SO3 (2-) circumstance.

Effect of monomer dosing rate in the preparation of mesoporous polystyrene nanoparticles by semicontinuous heterophase polymerization

The semicontinuous heterophase polymerization of styrene in the presence of cross-linking and porogen agents was carried out. Latexes with close to 20% solid content, which contained mesoporous nanoparticles with 28 nm in average diameters, up to 0.5 cm3/g in porosity and 6-8 nm in pore diameters were obtained. By varying the monomer dosing rate over the micellar solution, an unexpected direct dependence of instantaneous conversion on the monomer dosing rate was found. This was ascribed to the higher average number of radicals per particle attained in the polymerization at the higher dosing rate, which in turn would arise from the higher gel percentage in the polymer. It is believed that the cross-linked chains prevent encounters between radicals, delaying the bimolecular termination reactions and allowing the existence of more than one radical inside the particles, which in turn increases the propagation rate.

Reduction of ethylenediaminetetraacetic acid iron(III) by Klebsiella sp. FD-3 immobilized on iron(II, III) oxide poly (styrene-glycidyl methacrylate) magnetic porous microspheres: effects of inorganic compounds and kinetic study of effective diffusion in porous media

Fe3O4 poly (styrene-glycidyl methacrylate) magnetic porous microspheres (MPPMs) were introduced to immobilize Klebsiella sp. FD-3, an iron-reducing bacterium applied to reduce Fe(III)EDTA. The effects of potential inhibitors (S(2-), SO3(2-), NO3(-), NO2(-) and Fe(II)EDTA-NO) on Fe(III)EDTA reduction were investigated. S(2-) reacted with Fe(III)EDTA as an electron-shuttling compound and enhanced the reduction. But Fe(III)EDTA reduction was inhibited by SO3(2-) and Fe(II)EDTA-NO due to their toxic to microorganisms. Low concentrations of NO3(-) and NO2(-) accelerated Fe(III)EDTA reduction, but high concentrations inhibited the reduction, whether by free or immobilized FD-3. The immobilized FD-3 performed better than freely-suspended style. The substrate mass transfer and diffusion kinetics in the porous microspheres were calculated. The value of Thiele modulus and effectiveness factors showed that the intraparticle diffusion was fairly small and neglected in this carrier. Fe(III)EDTA reduction fitted first-order model at low Fe(III)EDTA concentration, and changed to zero-order model at high concentrations.

Current advances of integrated processes combining chemical absorption and biological reduction for NO x removal from flue gas

Anthropogenic nitrogen oxides (NO x ) emitted from the fossil-fuel-fired power plants cause adverse environmental issues such as acid rain, urban ozone smoke, and photochemical smog. A novel chemical absorption-biological reduction (CABR) integrated process under development is regarded as a promising alternative to the conventional selective catalytic reduction processes for NO x removal from the flue gas because it is economic and environmentally friendly. CABR process employs ferrous ethylenediaminetetraacetate [Fe(II)EDTA] as a solvent to absorb the NO x following microbial denitrification of NO x to harmless nitrogen gas. Meanwhile, the absorbent Fe(II)EDTA is biologically regenerated to sustain the adequate NO x removal. Compared with conventional denitrification process, CABR not only enhances the mass transfer of NO from gas to liquid phase but also minimize the impact of oxygen on the microorganisms. This review provides the current advances of the development of the CABR process for NO x removal from the flue gas.

Facile Synthesis of Magnetic Copolymer Microspheres Based on Poly(glycidyl methacrylate-co-N-isopropylacrylamide)/Fe3O4by Suspension Photopolymerization

Magnetic copolymer based on poly(glycidyl methacrylate-co-N-isopropylacrylamide) microspheres was prepared by 2,2-dimethoxy-2-phenylacetophenone- (DMPP-) photo initiated and poly(vinyl alcohol)- (PVA-) stabilized single step suspension photopolymerization. The effect of chemical interaction, morphology, and thermal properties by adding 0.1% w/v Fe3O4in the copolymer was investigated. Infrared analysis (FTIR) showed that (C=C) band disappeared after copolymerization, indicating that the magnetic copolymer microspheres were successfully synthesized and two important bands at 908 cm−1and 1550 cm−1appear. These are associated with the epoxy group stretching of GMA and secondary amide (N–H/C–H) deformation vibration of NIPAAm in magnetic microspheres. The X-ray diffraction (XRD) result proved the incorporation of Fe3O4nanoparticles with copolymer microspheres as peak of Fe3O4was observed. Morphology study revealed that magnetic copolymer exhibited uniform spheres and smoother appearance when entrapped with Fe3O4nanoparticles. The lowest percentage of Fe3O4nanoparticles leached from the copolymer microspheres was obtained at pH 7. Finally, thermal property of the copolymer microspheres was improved by adding a small amount of Fe3O4nanoparticles that has been shown from the thermogram.

NOx removal in chemical absorption-biological reduction integrated system: process rate and rate-limiting step

Biological reduction of Fe(III)EDTA is considered as the key step that limits the removal efficiency of the chemical absorption-biological reduction integrated system. In this study, the process rates of each reaction step under typical conditions (T=50°C, C FeII(EDTA)=1-5 mmol/L, CNO=0-500 ppm, CO2=1-10%, pH=7) were determined. Relevant kinetic constants including rate constants of absorption part and Michaelis-Menten kinetic constants of regeneration part were also obtained. On this basis, the theoretical process rates of each reaction step were predicted and compared in a steady state. The results confirmed that the removal rate of NO in this system is limited by the biological reduction of Fe(III)EDTA. Moreover, it indicated that increasing the concentration of total iron appropriately could enhance the bioreduction of Fe(III)EDTA.