Selection of elite microalgae for biodiesel production in tropical conditions using a standardized platform

Progress on Conventional and Advanced Techniques of In Situ Transesterification of Microalgae Lipids for Biodiesel Production

Global warming and the depletion of fossil fuels have spurred many efforts in the quest for finding renewable, alternative sources of fuels, such as biodiesel. Due to its auxiliary functions in areas such as carbon dioxide sequestration and wastewater treatment, the potential of microalgae as a feedstock for biodiesel production has attracted a lot of attention from researchers all over the world. Major improvements have been made from the upstream to the downstream aspects related to microalgae processing. One of the main concerns is the high cost associated with the production of biodiesel from microalgae, which includes drying of the biomass and the subsequent lipid extraction. These two processes can be circumvented by applying direct or in situ transesterification of the wet microalgae biomass, hence substantially reducing the cost. In situ transesterification is considered as a significant improvement to commercially produce biodiesel from microalgae. This review covers the methods used to extract lipids from microalgae and various in situ transesterification methods, focusing on recent developments related to the process. Nevertheless, more studies need to be conducted to further enhance the discussed in situ transesterification methods before implementing them on a commercial scale.

A comparative assessment of growth, pigment and enhanced lipid production by two toxic freshwater cyanobacteria Anabaena circinalis FSS 124 and Cylindrospermopsis raciborskii FSS 127 under various combinations of nitrogen and phosphorous inputs

Nitrogen and phosphorous are important nutritional regulators for the growth of cyanobacteria, thereby having a significant impact in bloom formation by toxic species. Usage of toxic cyanobacteria for increasing valuable metabolite production by nutrient manipulation is still unexplored. Hence, the current work is aimed to estimate and compare growth, pigment, and increased lipid production coupled with the identification of fatty acids between two toxic strains-Anabaena circinalis FSS 124 and Cylindrospermopsis raciborskii FSS 127 under various combinations of these two nutrients. Low level of nitrogen and phosphorous enhanced lipid content in both strains (˃ 20% and 30% respectively) and C. raciborskii, respectively. Lipid productivity in low phosphorous concentration (P0.5) was achieved significantly high in C. raciborskii. Similarly, a substantial amount of carotenoids was obtained at reduced nitrogen and phosphorous in C. raciborskii accompanied by lessened growth and Chl a concentration. Unlikely, enough biomass (˃ 2 g L^-1) was produced at high nutrient levels in both species. Comparative statistical significance (p < 0.05) was found between two species regarding biomass production, chlorophyll concentration, lipid content, and productivity and between these factors in each species under both nutrient variations. FAME of Cylindrospermopsis is composed of saturated fatty acids (˃ 50%) and MUFA (˃ 25%) while Anabaena contains PUFA (˃ 21%) additionally. However, the study highlights C. raciborskii as potential lipid and carotenoid producer at nutrient stress and finds a novel way to utilize these cyanobacterial biomasses, which cause immense environmental hazards and life threats.

Mechanisms protect airborne green microalgae during long distance dispersal

Viable microalgae occur in the air. Whether they can survive the stresses such as UV, desiccation and freezing temperatures at high altitudes during long distance dispersal is rarely studied. If yes, what mechanisms confer the tolerance? Four freshwater airborne green microalgae were isolated from Dongsha Atoll in the South China Sea, classified as Scenedesmus sp. DSA1, Coelastrella sp. DSA2, Coelastrella sp. DSA3 and Desmodesmus sp. DSA6 based on their morphologies and ITS sequences. Their survival rates under UV stress were tightly correlated with their cell wall thickness. All the four airborne green microalgae survived the air-dry stress on benchtop followed by − 20 °C freeze–desiccation stress for 4 weeks, but not the two waterborne green microalgae Desmodesmus sp. F5 and Neodesmus sp. UTEX 2219-4 used as controls. Three of the four airborne microalgae survived the lyophilization treatment, excluding Desmodesmus sp. DSA6 and the two waterborne microalgae. The four airborne microalgae produced carotenoids under prolonged stress conditions, which might help detoxify the reactive oxygen species generated under environmental stresses and shield from the high-light stress in the air. Characterization of these airborne microalgae may help answer how the descendants of green algae survived on the land about 450 MYA.

Harnessing the Power of Mutagenesis and Adaptive Laboratory Evolution for High Lipid Production by Oleaginous Microalgae and Yeasts

Oleaginous microalgae and yeasts represent promising candidates for large-scale production of lipids, which can be utilized for production of drop-in biofuels, nutraceuticals, pigments, and cosmetics. However, low lipid productivity and costly downstream processing continue to hamper the commercial deployment of oleaginous microorganisms. Strain improvement can play an essential role in the development of such industrial microorganisms by increasing lipid production and hence reducing production costs. The main means of strain improvement are random mutagenesis, adaptive laboratory evolution (ALE), and rational genetic engineering. Among these, random mutagenesis and ALE are straight forward, low-cost, and do not require thorough knowledge of the microorganism’s genetic composition. This paper reviews available mutagenesis and ALE techniques and screening methods to effectively select for oleaginous microalgae and yeasts with enhanced lipid yield and understand the alterations caused to metabolic pathways, which could subsequently serve as the basis for further targeted genetic engineering.

Draft Genome Sequence of the Biofuel-Relevant Microalga Desmodesmus armatus

A draft genome of 906 scaffolds of 115.8 Mb was assembled for Desmodesmus armatus, a diploid, lipid- and storage carbohydrate-accumulating microalga proven relevant for large-scale, outdoor cultivation, and serves as a model alga platform for improving photosynthetic efficiency and carbon assimilation for next-generation bioenergy production.

A draft genome of 906 scaffolds of 115.8 Mb was assembled for Desmodesmus armatus, a diploid, lipid- and storage carbohydrate-accumulating microalga proven relevant for large-scale, outdoor cultivation, and serves as a model alga platform for improving photosynthetic efficiency and carbon assimilation for next-generation bioenergy production.

Cultivation of two thermotolerant microalgae under tropical conditions: Influences of carbon sources and light duration on biomass and lutein productivity in four seasons

Biomass and lutein productivities of two thermotolerant microalgae were assessed in tropical outdoor conditions in all four seasons. Generally, addition of bicarbonate at 0.2g/L every two days or 2% CO2 did not enhance the productivities compared to the controls, and the productivities in the spring were higher than in the fall. Durations of effective irradiance positively correlated to the productivity of Coelastrella sp. F50 well, but not for Desmodesmus sp. F2. The ineffective light intensity was below 5000 lux (about 106μmol/m(2)s). The productivities produced in the 17cm diameter bottles were 1.5- to 1.9-fold higher than that in the 27cm ones. Lutein content, about 0.5% in biomass on average, did not change significantly grown in different carbon sources or seasons. The annual productivities of the microalgal biomass and lutein in one hectare were estimated to be 33tons and 180kg, respectively, using the non-optimized photobioreactor cultivation.

Production of long chain omega-3 fatty acids and carotenoids in tropical areas by a new heat-tolerant microalga Tetraselmis sp. DS3

Demand for long chain ω-3 fatty acids from non-fish source for vegetarians has increased recently. Marine microalgae are the primary producers of EPA/DHA and promising alternatives for fish oil. Tropical areas have abundant sunlight throughout the year for microalgal cultivation but this practice can be hindered by high temperature. Discovery of heat-tolerant marine microalgae that can synthesize EPA/DHA will solve these problems. A new species of microalga was isolated from a high temperature lagoon and identified as Tetraselmis sp. DS3. These cells could grow at 40 °C, the highest temperature for marine microalgal growth ever reported. Its ω-3 fatty acids and EPA accounted for 33 and 10% of total lipids, respectively, grown in nitrogen-depleted conditions. These cells also accumulated more than 5% β-carotene and 0.48% lutein in biomass. This new microalga can be cultivated for long chain ω-3 fatty acids and lutein production in the tropical areas.

Similarity and diversity of the Desmodesmus spp. microalgae isolated from associations with White Sea invertebrates

Similarity and diversity of the phenotype and nucleotide sequences of certain genome loci among the single-celled microalgae isolated from White Sea benthic invertebrates were studied to extend the knowledge of oxygenic photoautotrophs forming microbial communities associated with animals. We compared four Desmodesmus isolates (1Hp86E-2, 1Pm66B, 3Dp86E-1, 2Cl66E) from the sponge Halichondria panicea, trochophore larvae of the polychaete Phyllodoce maculata, and the hydroids Dynamena pumila and Coryne lovenii, respectively. The microalgae appeared to be very similar featuring the phenotypic and genetic traits characteristics of unicellular representatives of the genus Desmodesmus. At the same time, isolates from different animal species displayed certain differences in (i) the epistructure morphology; (ii) type and number of the inclusions such as interthylakoid starch grains and cytoplasmic oil bodies and (iii) fatty acid composition; in Desmodesmus sp. 1Hp86E-2, these differences were most pronounced. Phylogenetic analysis based on ITS1-5.8S rRNA-ITS2 and rbcL sequences showed that all isolates studied differ from known classified representatives of Desmodesmus combining a deletion in the conservative 5.8S rRNA gene and long AC-microsatellite repeats in the ITS1 whereas 1Hp86E-2 represented a distinct branch within this group.

Boosting D-lactate production in engineered cyanobacteria using sterilized anaerobic digestion effluents

Anaerobic digestion (AD) is an environmentally friendly approach to waste treatment, which can generate N and P-rich effluents that can be used as nutrient sources for microalgal cultivations. Modifications of AD processes to inhibit methanogenesis leads to the accumulation of acetic acid, a carbon source that can promote microalgal biosynthesis. This study tested different AD effluents from municipal wastes on their effect on D-lactate production by an engineered Synechocystis sp. PCC 6803 (carrying a novel lactate dehydrogenase). The results indicate that: (1) AD effluents can be supplemented into the modified BG-11 culture medium (up to 1:4 volume ratio) to reduce N and P cost; (2) acetate-rich AD effluents enhance D-lactate synthesis by ∼ 40% (1.2g/L of D-lactate in 20 days); and (3) neutral or acidic medium had a deleterious effect on lactate secretion and biomass growth by the engineered strain. This study demonstrates the advantages and guidelines in employing wastewater for photomixotrophic biosynthesis using engineered microalgae.

Exploring the high lipid production potential of a thermotolerant microalga using statistical optimization and semi-continuous cultivation

A recently isolated thermotolerant microalga Desmodesmus sp. F2 has the traits of becoming potential biodiesel feedstock, such as high growth rate, high lipid content, and quick precipitation. Its overall lipid productivity was 113 mg/L/d when grown under non-optimal conditions using batch cultivation. A two-step response surface methodology was adopted to optimize its cultivation conditions. The overall lipid productivity was increased to 263 mg/L/d when the cells were grown under the optimized conditions of 6.6mM initial nitrogen level and 6 days nitrogen depletion treatment in 700 μmol/m(2)/s light intensity at 35°C using batch cultivation. Fed-batch and semi-continuous cultivations were employed to further increase its lipid productivity to 213 and 302 mg/L/d, respectively. The 302 mg/L/d is the highest overall lipid productivity of microalgae ever reported in the literature. This study provides the information required for the design and operation of photobioreactors for large scale outdoor cultivation of this species.

Achieving high lipid productivity of a thermotolerant microalga Desmodesmus sp. F2 by optimizing environmental factors and nutrient conditions

The optimal conditions for cultivating the thermotolerant lipid-rich microalga Desmodesmus sp. F2 to achieve maximal lipid productivity were determined in this study. The conditions were light intensity, 700μmol/m(2)s; temperature, 35°C; cultivation nitrogen source, nitrate; initial nitrogen level, 6.6mM nitrogen. Carbon dioxide (2.5%, 0.2 vvm) was pumped into the cultures continuously. In the pre-optimized conditions, the maximal lipid productivity of this microalga was 113mg/L/d, which was raised to 263mg/L/d in the optimized conditions. This level of lipid productivity of microalgae is the highest ever reported in the literature. Fatty acid composition of the lipid produced by Desmodesmus sp. F2 in the optimal conditions was determined, in which C16 and C18 species accounted for 95% of the fatty acids. Saturated, monounsaturated and polyunsaturated fatty acids accounted for 38.9%, 33.1% and 22.6%, respectively. Based on the analysis, this lipid quality makes it a good feedstock for biodiesel production.