Increasing polyhydroxyalkanoate (PHA) yields from Cupriavidus necator by using filtered digestate liquors

Food wastes for bioproduct production and potential strategies for high feedstock variability

Unavoidable food wastes could be an important feedstock for industrial biotechnology, while their valorization could provide added value for the food processor. However, despite their abundance and low costs, the heterogeneous/mixed nature of these food wastes produced by food processors and consumers leads to a high degree of variability in carbon and nitrogen content, as well as specific substrates, in food waste hydrolysate. This has limited their use for bioproduct synthesis. These wastes are often instead used in anaerobic digestion and mixed microbial culture, creating a significant knowledge gap in their use for higher value biochemical production via pure and single microbial culture. To directly investigate this knowledge gap, various waste streams produced by a single food processor were enzymatically hydrolyzed and characterized, and the degree of variability with regard to substrates, carbon, and nitrogen was quantified. The impact of hydrolysate variability on the viability and performance of polyhydroxyalkanoates biopolymers production using bacteria (Cupriavidus necator) and archaea (Haloferax mediterranei) as well as sophorolipids biosurfactants production with the yeast (Starmerella bombicola) was then elucidated at laboratory-scale. After which, strategies implemented during this experimental proof-of-concept study, and beyond, for improved industrial-scale valorization which addresses the high variability of food waste hydrolysate were discussed in-depth, including media standardization and high non-selective microbial organisms growth-associated product synthesis. The insights provided would be beneficial for future endeavors aiming to utilize food wastes as feedstocks for industrial biotechnology.

Anaerobic digestate valorization beyond agricultural application: Current status and prospects

The flourishment of anaerobic digestion emphasizes the importance of digestate valorization, which is essential in determining the benefits of the anaerobic digestion process. Recently the perception of digestate gradually shifted from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. Land application of digestate should be the simplest way for digestate valorization, while legislation restriction and environmental issues emphasize the necessity of novel valorization methods. This review then outlined the current methods for solid/liquid digestate valorization, nutrient recovery, microalgae cultivation, and integration with biological and thermochemical processes. The novel valorization routes proposed were summarized, with their challenges and prospects being discussed. Integrating anaerobic digestion with thermochemical methods such as hydrothermal carbonization should be a promising strategy due to the potential market value of hydrochar/biochar-derived products.

Fermentative α-Humulene Production from Homogenized Grass Clippings as a Growth Medium

Green waste, e.g., grass clippings, is currently insufficiently recycled and has untapped potential as a valuable resource. Our aim was to use juice from grass clippings as a growth medium for microorganisms. Herein, we demonstrate the production of the sesquiterpene α-humulene with the versatile organism Cupriavidus necator pKR-hum on a growth medium from grass clippings. The medium was compared with established media in terms of microbial growth and terpene production. C. necator pKR-hum shows a maximum growth rate of 0.43 h^-1 in the grass medium and 0.50 h^-1 in a lysogeny broth (LB) medium. With the grass medium, 2 mg/L of α-humulene were produced compared to 10 mg/L with the LB medium. By concentrating the grass medium and using a controlled bioreactor in combination with an optimized in situ product removal, comparable product concentrations could likely be achieved. To the best of our knowledge, this is the first time that juice from grass clippings has been used as a growth medium without any further additives for microbial product synthesis. This use of green waste as a material represents a new bioeconomic utilization option of waste materials and could contribute to improving the economics of grass biorefineries.

Modeling the growth of diverse microorganisms during feast-famine enrichment

Polyhydroxyalkanoates (PHAs) are biodegradable polymers that can decrease the severe environmental pollution of petroleum plastics. PHA production by mixed microbial communities has been extensively studied to lower the high PHA prices. However, the competition between distinct microbial communities during the enrichment of PHA accumulators in mixed cultures has not been widely investigated. Thus, in this work, we developed a mathematical model for the competition between PHA accumulators and non-PHA accumulators in the feast-famine enrichment strategy. The developed model successfully simulated published lab-scale experimental data for Plasticicumulans acidivorans, a well-studied PHA accumulator that can store PHA up to 90% of the cell weight. The growth kinetics for both PHA and non-PHA accumulators were estimated and compared to the values in the literature. The uncertainties in the model kinetics were studied by expanding the model to include additional sub-biomass components for each heterotrophic group. As a result, the microbial diversity of microbial communities was observed to influence the enrichment of PHA accumulators in mixed cultures. Additionally, the calibrated model was applied to investigate the cultivation conditions, such as cycle lengths, carbon-to-nitrogen ratio, and solids retention time for successful P. acidivorans enrichment in mixed cultures. The developed model can be applied to control the cultivation and enrichment of PHA accumulators in large-scale PHA production systems. PRACTITIONER POINTS: A new model for the enrichment of PHA accumulators was developed. The model can simulate PHA accumulation by enriched cultures. The model was calibrated and validated for Plasticicumulans acidivorans. The impact of microbial diversity on enriching PHA accumulators was investigated. Short cycles (<12 h) and SRT (<10 d) are suggested for successful enrichment.

Optimization of Growth Conditions to Enhance PHA Production by Cupriavidus necator

The accumulation of polyhydroxyalkanoates (PHAs) by microorganisms usually occurs in response to environmental stress conditions. Therefore, it is advantageous to choose two-step cultivation. The first phase is aimed at maximizing biomass production, and only in the second phase, after setting the suitable conditions, PHA production starts. The aim of this work was to optimize the composition of the minimal propagation medium used for biomass production of Cupriavidus necator DSM 545 using the response surface methodology (RSM). Based on the results from the search for optimization limits, the glucose concentration, the ammonium sulfate concentration and the phosphate buffer molarity were chosen as independent variables. The optimal values were found as follows: the glucose concentration 10.8 g/L; the ammonium sulfate concentration 0.95 g/L; and the phosphate buffer molarity 60.2 mmol/L. The predicted biomass concentration was 4.54 g/L, and the verified value was at 4.84 g/L. Although this work was primarily focused on determining the optimal composition of the propagation medium, we also evaluated the optimal composition of the production medium and found that the optimal glucose concentration was 6.7 g/L; the ammonium sulfate concentration 0.60 g/L; and the phosphate buffer molarity 20 mmol/L. The predicted PHB yield was 54.7% (w/w) of dry biomass, and the verified value was 49.1%.

Bioconversion of Plastic Waste Based on Mass Full Carbon Backbone Polymeric Materials to Value-Added Polyhydroxyalkanoates (PHAs)

This review article will discuss the ways in which various polymeric materials, such as polyethylene (PE), polypropylene (PP), polystyrene (PS), and poly(ethylene terephthalate) (PET) can potentially be used to produce bioplastics, such as polyhydroxyalkanoates (PHAs) through microbial cultivation. We will present up-to-date information regarding notable microbial strains that are actively used in the biodegradation of polyolefins. We will also review some of the metabolic pathways involved in the process of plastic depolymerization and discuss challenges relevant to the valorization of plastic waste. The aim of this review is also to showcase the importance of methods, including oxidative degradation and microbial-based processes, that are currently being used in the fields of microbiology and biotechnology to limit the environmental burden of waste plastics. It is our hope that this article will contribute to the concept of bio-upcycling plastic waste to value-added products via microbial routes for a more sustainable future.

A Review on Enhancing Cupriavidus necator Fermentation for Poly(3-hydroxybutyrate) (PHB) Production From Low-Cost Carbon Sources

In the context of a circular economy, bioplastic production using biodegradable materials such as poly(3-hydroxybutyrate) (PHB) has been proposed as a promising solution to fundamentally solve the disposal issue of plastic waste. PHB production techniques through fermentation of PHB-accumulating microbes such as Cupriavidus necator have been revolutionized over the past several years with the development of new strategies such as metabolic engineering. This review comprehensively summarizes the latest PHB production technologies via Cupriavidus necator fermentation. The mechanism of the biosynthesis pathway for PHB production was first assessed. PHB production efficiencies of common carbon sources, including food waste, lignocellulosic materials, glycerol, and carbon dioxide, were then summarized and critically analyzed. The key findings in enhancing strategies for PHB production in recent years, including pre-treatment methods, nutrient limitations, feeding optimization strategies, and metabolism engineering strategies, were summarized. Furthermore, technical challenges and future prospects of strategies for enhanced production efficiencies of PHB were also highlighted. Based on the overview of the current enhancing technologies, more pilot-scale and larger-scale tests are essential for future implementation of enhancing strategies in full-scale biogas plants. Critical analyses of various enhancing strategies would facilitate the establishment of more sustainable microbial fermentation systems for better waste management and greater efficiency of PHB production.

Innovative co-production of polyhydroxyalkanoates and methane from broken rice

Broken rice, a low-cost starchy residue of the rice industry, can be an interesting substrate to reduce the polyhydroxyalkanoates (PHAs) production cost. However, since the most common PHAs-producing strains lack amylases, this waste must be firstly hydrolysed by additional commercial enzymes. In this work, the acidogenesis phase of the anaerobic digestion was exploited as efficient hydrolysis step to convert broken rice into volatile fatty acids (VFAs) to be used as PHAs carbon source by Cupriavidus necator DSM 545, one of the most promising PHAs-producing microbes. Broken rice, both non-hydrolysed and enzymatically hydrolysed, was processed in two continuous stirred tank reactors, at hydraulic retention times (HRT) of 5, 4 and, 3 days, to produce VFAs. The highest VFAs levels were obtained from non-hydrolysed broken rice which was efficiently exploited for PHAs accumulation by C. necator DSM 545. PHAs contents were higher after 96 h of incubation and, noteworthy, reached the highest value of 0.95 g/L in the case of 4 days HRT without any chemicals supplementation, except vitamins. Moreover, in view of a biorefinery approach, the residual solid fraction was used for methane production resulting in promising CH₄ levels. Methane yields were very promising again for 4 days HRT. As such, this HRT resulted to be the most suitable to obtain effluents with high promise in terms of both PHAs accumulation and CH₄ production. In addition, these results demonstrate that broken rice could be efficiently processed into two valuable products without any costly enzymatic pre-treatment and pave the way for future biorefining approaches where this by-product can be converted in a cluster of added-value compounds. Techno-economical estimations are in progress to assess the feasibility of the entire process, in view of supporting the low-cost conversion of organic waste into valuable products.

Anaerobic digestion challenges and resource recovery opportunities from land-based aquaculture waste and seafood processing byproducts: A review

The unprecedented demand for seafood has resulted in land-based recirculating aquaculture systems (RAS), a highly intensive but sustainable fish farming method. However, intensification also results in concentrated waste streams of fecal matter and uneaten feed. Harvesting and processing vast quantities of fish also leads to the production of byproducts, further creating disposal challenges for fish farms. Recent research indicates that anaerobic digestion (AD), often used for waste treatment in agricultural and wastewater industries, may provide a viable solution. Limited research on AD of freshwater, brackish, and saline wastewater from RAS facilities and co-digestion of seafood byproducts has shown promising results but with considerable operational and process stability issues. This review discusses challenges to AD due to low solid concentrations, salinity, low carbon/nitrogen ratio, and high lipid content in the waste streams. Opportunities for recovering valuable biomolecules and nutrients through microbial treatment, aquaponics, microalgae, and polyhydroxyalkanoate production are also discussed.

Direct processing of alginate-immobilized microalgae into polyhydroxybutyrate using marine bacterium of Saccharophagus degradans

Alginate immobilized microalgae (AIM) was found efficient in algal cells separation and pollutants removal, however, its processing required alginate removal. In present study, polysaccharide-degrading bacterium of Saccharophagus degradans was used to biodegrade alginate and microalgae in AIM and produce polyhydroxybutyrate (PHB). Results showed that AIM cultivated in wastewater contained 34.0% carbohydrate and 45.7% protein. S. degradans effectively degraded and utilized polysaccharide of AIM to maintain five-day continuous growth at 7.1-8.8 log CFU/mL. Compared with glucose, S. degradans metabolism of mixed polysaccharide in AIM maintained the medium pH at 7.1-7.8. Increasing the inoculum concentration did not enhance AIM utilization by S. degradans due to the carbon catabolite repression of glucose which likely inactivated hydrolysis enzymes. PHB production in S. degradans peaked at 64.9 mg/L after 72 h cultivation but was later degraded to provide energy. Conclusively, S. degradans was effective in direct processing of AIM while showing potential in PHB production.

The role of polyhydroxyalkanoates in adaptation of Cupriavidus necator to osmotic pressure and high concentration of copper ions

Polyhydroxyalkanoates (PHA) are abundant microbial polyesters accumulated in the form of intracellular granules by numerous prokaryotes primarily as storage of carbon and energy. Apart from their storage function, the presence of PHA also enhances the robustness of the microbial cells against various stressors. In this work, we investigated the role of PHA in Cupriavidus necator, a model organism concerning PHA metabolism, for adaptation to osmotic pressure and copper ions. In long-term laboratory evolution experiments, the bacterial culture was cultivated in presence of elevated doses of sodium chloride or copper ions (incubations lasted 78 passages for Cu²⁺ and 68 passages for NaCl) and the evolved strains were compared with the wild-type strain in terms of growth and PHA production capacity, cell morphology (investigated by various electron microscopy techniques), activities of selected enzymes involved in PHA metabolism and other crucial metabolic pathways, the chemical composition of bacterial biomass (determined by infrared and Raman spectroscopy) and also considering robustness against various stressors. The results confirmed the important role of PHA metabolism for adaptation to both tested stressors.

Evaluation of Fed-Batch Fermentation for Production of Polyhydroxybutyrate With a Banana Pulp Juice Substrate From an Agro Industrial By-Product

Pollution resulting from the persistence of plastics in the environment has driven the development of substitutes for these materials through fermentation processes using agro-industrial wastes. Polyhydroxybutyrate (PHB) is a rapidly biodegradable material with chemical and mechanical properties comparable to those of some petroleum-derived plastics. PHB accumulates intracellularly as an energy reserve in a wide variety of microorganisms exposed to nutritionally imbalanced media. The objective of this study was to evaluate the use of a banana waste product as a carbon source for PHB production. PHB was extracted by acid methanolysis and detected by gas chromatography-mass spectrometry. Eleven bacterial strains with potential for PHB production were evaluated by in vitro fermentation in a culture broth containing fructose as the carbon source and limited nitrogen. A 22 central composite rotational design was applied to optimize the concentrations of banana juice and ammonium chloride needed to maximize the PHB-producing biomass concentration. The process was then carried out in a 3 L fed-batch fermentation system that included an initial stage of biomass growth. Banana juice was used as the carbon source and fructose pulses were added to maintain the test sugar concentrations of 30, 40, and 50 g/L. The control strain, Cupriavidus necator (ATCC 17699), produced 2.816 g/L of PHB, while productivity of the most promising isolate, C. necator (CR-12), was 0.495 g/L. Maximum biomass production was obtained using 5% banana juice and 2 g/L ammonium chloride. PHB production was not detected in fed-batch fermentations supplemented with 30 or 40 g/L of fructose, while the mean PHB production in fermentations with 50 g/L of fructose was 1.3 g/L.

Production of polyhydroxyalkanoates using dairy processing waste - A review

Bio-plastics are eco-friendly biopolymers finding tremendous application in the food and pharmaceutical industries. Bio-plastics have suitable physicochemical, mechanical properties, and do not cause any type of hazardous pollution upon disposal but have a high production cost. This can be minimized by screening potential bio-polymers producing strains, selecting inexpensive raw material, optimized cultivation conditions, and upstream processing. These bio-plastics specifically microbial-produced bio-polymers such as polyhydroxyalkanoates (PHAs) find application in food industries as packaging material owing to their desirable water barrier and gas permeability properties. The present review deals with the production, recovery, purification, characterization, and applications of PHAs. This is a comprehensive first review will also focus on different strategies adopted for efficient PHA production using dairy processing waste, its biosynthetic mechanism, metabolic engineering, kinetic aspects, and also biodegradability testing at the lab and pilot plant level. In addition to that, the authors will be emphasizing more on novel PHAs nanocomposites synthesis strategies and their commercial applicability.

Waste to bioplastics: How close are we to sustainable polyhydroxyalkanoates production?

Increased awareness of environmental sustainability with associated strict environmental regulations has incentivized the pursuit of novel materials to replace conventional petroleum-derived plastics. Polyhydroxyalkanoates (PHAs) are appealing intracellular biopolymers and have drawn significant attention as a viable alternative to petrochemical based plastics not only due to their comparable physiochemical properties but also, their outstanding characteristics such as biodegradability and biocompatibility. This review provides a comprehensive overview of the recent developments on the involved PHA producer microorganisms, production process from different waste streams by both pure and mixed microbial cultures (MMCs). Bio-based PHA production, particularly using cheap carbon sources with MMCs, is getting more attention. The main bottlenecks are the low production yield and the inconsistency of the biopolymers. Bioaugmentation and metabolic engineering together with cost effective downstream processing are promising approaches to overcome the hurdles of commercial PHA production from waste streams.

Accumulation of PHA in the Microalgae Scenedesmus sp. under Nutrient-Deficient Conditions

Traditional plastics have undoubted utility and convenience for everyday life; but when they are derived from petroleum and are non-biodegradable, they contribute to two major crises today's world is facing: fossil resources depletion and environmental degradation. Polyhydroxyalkanoates are a promising alternative to replace them, being biodegradable and suitable for a wide variety of applications. This biopolymer accumulates as energy and carbon storage material in various microorganisms, including microalgae. This study investigated the influence of glucose, N, P, Fe, and salinity over the production of polyhydroxyalkanoate (PHA) by Scenedesmus sp., a freshwater microalga strain not previously explored for this purpose. To assess the effect of the variables, a fractional Taguchi experimental design involving 16 experimental runs was planned and executed. Biopolymer was obtained in all the experiments in a wide range of concentrations (0.83-29.92%, w/w DW), and identified as polyhydroxybutyrate (PHB) by FTIR analysis. The statistical analysis of the response was carried out using Minitab 16, where phosphorus, glucose, and iron were identified as significant factors, together with the P-Fe and glucose-N interactions. The presence of other relevant macromolecules was also quantified. Doing this, this work contributes to the understanding of the critical factors that control PHA production and present Scenedesmus sp. as a promising species to produce bio-resources in commercial systems.

Dynamic Metabolic Analysis of Cupriavidus necator DSM545 Producing Poly(3-hydroxybutyric acid) from Glycerol

Cupriavidus necator DSM 545 can utilise glycerol to synthesise poly(3-hydroxybutyric acid) under unbalanced growth conditions, i.e., nitrogen limitation. To improve poly(3-hydroxybutyric acid) (PHB) batch production by C. necator through model-guided bioprocessing or genetic engineering, insights into the dynamic effect of the fermentation conditions on cell metabolism are crucial. In this work, we have used dynamic flux balance analysis (DFBA), a constrained-based stoichiometric modelling approach, to study the metabolic change associated with PHB synthesis during batch cultivation. The model employs the ‘minimisation of all fluxes’ as cellular objectives and measured extracellular fluxes as additional constraints. The mass balance constraints are further adjusted based on thermodynamic considerations. The resultant flux distribution profiles characterise the evolution of metabolic states due to adaptation to dynamic extracellular conditions and provide further insights towards improvements that can be implemented to enhance PHB productivity.

Production of polyhydroxyalkanoates by halotolerant bacteria with volatile fatty acids from food waste as carbon source

In this study, a halotolerant strain was isolated from high salinity leachate and identified as Bacillus cereus NT-3. It can produce a high concentration of polyhydroxyalkanoates (PHAs) with no significant changes when NaCl concentration is up to 50 g/L. FTIR and NMR spectra of PHAs synthesized by Bacillus cereus NT-3 were similar to the standard or previous results. Effluent from acidogenic fermentation of food waste and pure volatile fatty acids (VFAs) mixture was used as carbon source to check the effect of non-VFAs compounds of the effluent on PHAs production. The maximum PHAs production was 0.42 g/L for effluent fermentation, whereas it was 0.34 g/L for pure VFAs fermentation, indicating that bacteria could use actual effluent in a better way. Furthermore, a mathematical model was established for describing kinetic behavior of bacteria using different carbon sources. These results provided a promising approach for PHAs biosynthesis with a low-cost carbon source.

Metabolomic insights into polyhydroxyalkanoates production by halophilic bacteria with acetic acid as carbon source

A metabolomics method was established to analyze changes of intracellular metabolites and study the mechanism for enhancing polyhydroxyalkanoates production by halotolerant bacteria, Bacillus cereus strain HY-3, using acetic acid as carbon source. Maximum poly(3-hydroxybutyrate) (PHB) contents for the medium with 0.5 g/L and 5.0 g/L of acetic acid were 41.0 ± 0.415% and 49.2 ± 1.21%. Principal components analysis revealed clear metabolic differences in different growth stages and different concentrations of carbon source. According to statistical analysis, 3-hydroxybutyrate (3-HB), serine, threonine, malate, and pyruvate were determined as potential biomarkers for PHB production. Moreover, metabolic pathways analysis indicated that high level of 3-HB in death phase was due to the limitation of carbon source. Metabolism of glycine, serine, and threonine was influential pathway for PHB production among amino acid metabolisms. High levels of organic acids from the TCA cycle could stimulate the carbon source flux into PHB biosynthetic pathway.

Using microalgae in the circular economy to valorise anaerobic digestate: challenges and opportunities

Managing organic waste streams is a major challenge for the agricultural industry. Anaerobic digestion (AD) of organicwastes is a preferred option in the waste management hierarchy, as this processcangenerate renewableenergy, reduce emissions from wastestorage, andproduce fertiliser material.However, Nitrate Vulnerable Zone legislation and seasonal restrictions can limit the use of digestate on agricultural land. In this paper we demonstrate the potential of cultivating microalgae on digestate as a feedstock, either directlyafter dilution, or indirectlyfromeffluent remaining after biofertiliser extraction. Resultant microalgal biomass can then be used to produce livestock feed, biofuel or for higher value bio-products. The approach could mitigate for possible regional excesses, and substitute conventional high-impactproducts with bio-resources, enhancing sustainability withinacircular economy. Recycling nutrients from digestate with algal technology is at an early stage. We present and discuss challenges and opportunities associated with developing this new technology.

Potential use of methane fermentation digested slurry as a low-cost, environmentally-friendly nutrient for bioethanol production from crude glycerol by Klebsiella variicola TB-83D

A methane fermentation digested slurry (MFDS) was evaluated as a substitute for the commercial nutrient, yeast extract (YE), in ethanol production from glycerol by Klebsiella variicola strain TB-83D. In pH-controlled fed-batch cultures, partial replacement of YE by MFDS did not reduce ethanol productivity significantly. However, non-sterilized MFDS had negative effects on glycerol fermentation by this strain. Although ethanol production decreased when YE was completely replaced by sterilized MFDS, the use of crude glycerol and sterilized MFDS achieved a yield of 14.6 g/L ethanol. This is the first study to report the use of MFDS as the sole nutrient for ethanol production from glycerol, which contributes to the development of a low-cost glycerol biorefinery derived from the biodiesel fuel industry.

Bacterial polyhydroxyalkanoates: Still fabulous?

Bacterial polyhydroxyalkanoates (PHA) are polyesters accumulated as carbon and energy storage materials under limited growth conditions in the presence of excess carbon sources. They have been developed as biomaterials with unique properties for the past many years being considered as a potential substitute for conventional non-degradable plastics. Due to the increasing concern towards global climate change, depleting petroleum resource and problems with an utilization of a growing number of synthetic plastics, PHAs have gained much more attention from industry and research. These environmentally friendly microbial polymers have great potential in biomedical, agricultural, and industrial applications. However, their production on a large scale is still limited. This paper describes the backgrounds of PHAs and discussed the current state of knowledge on the polyhydroxyalkanoates. Ability of bacteria to convert different carbon sources to PHAs, the opportunities and challenges of their introduction to global market as valuable renewable products have been also discussed.

PHA production from the organic fraction of municipal solid waste (OFMSW): Overcoming the inhibitory matrix

Leachate from the source separated organic fraction of municipal solid waste (OFMSW) was evaluated as a substrate for polyhydroxyalkanoates (PHA) production. Initially, the enrichment step was conducted directly on leachate in a feast-famine regime. Maximization of the cellular PHA content of the enriched biomass yielded to low PHA content (29 wt%), suggesting that the selection for PHA-producers was unsuccessful. When the substrate for the enrichment was switched to a synthetic volatile fatty acid (VFA) mixture -resembling the VFA carbon composition of the leachate-the PHA-producers gained the competitive advantage and dominated. Subsequent accumulation with leachate in nutrient excess conditions resulted in a maximum PHA content of 78 wt%. Based on the experimental results, enriching a PHA-producing community in a "clean" VFA stream, and then accumulating PHA from a stream that does not allow for enrichment but does enable a high cellular PHA content, such as OFMSW leachate, makes the overall process much more economically attractive. The estimated overall process yield can be increased four-fold, in comparison to direct use of the complex matrix for both enrichment and accumulation.

Beyond land application: Emerging technologies for the treatment and reuse of anaerobically digested agricultural and food waste

Effective treatment and reuse of the massive quantities of agricultural and food wastes generated daily has the potential to improve the sustainability of food production systems. Anaerobic digestion (AD) is used throughout the world as a waste treatment process to convert organic waste into two main products: biogas and nutrient-rich digestate, called AD effluent. Biogas can be used as a source of renewable energy or transportation fuels, while AD effluent is traditionally applied to land as a soil amendment. However, there are economic and environmental concerns that limit widespread land application, which may lead to underutilization of AD for the treatment of agricultural and food wastes. To combat these constraints, existing and novel methods have emerged to treat or reuse AD effluent. The objective of this review is to analyze several emerging methods used for efficient treatment and reuse of AD effluent. Overall, the application of emerging technologies is limited by AD effluent composition, especially the total solid content. Some technologies, such as composting, use the solid fraction of AD effluent, while most other technologies, such as algae culture and struvite crystallization, use the liquid fraction. Therefore, dewatering of AD effluent, reuse of the liquid and solid fractions, and land application could all be combined to sustainably manage the large quantities of AD effluent produced. Issues such as pathogen regrowth and prevalence of emerging organic micro-pollutants are also discussed.

Effect of sodium accumulation on heterotrophic growth and polyhydroxybutyrate (PHB) production by Cupriavidus necator

This study evaluates the effect of sodium (Na(+)) concentration on the growth and PHB production by Cupriavidus necator. Both biomass growth and PHB production were inhibited by Na(+): biomass growth became zero at 8.9 g/L Na(+) concentration while PHB production was completely stopped at 10.5 g/L Na(+). A mathematical model for pure culture heterotrophic PHB production was set up to describe the Na(+) inhibition effect. The parameters related to Na(+) inhibition were estimated based on shake flask experiments. The accumulated Na(+) showed non-linear inhibition effect on biomass growth but linear inhibition effect on PHB production kinetics. Fed-batch experiments revealed that a high accumulation of Na(+) due to a prolonged growth phase, using NaOH for pH control, decreased the subsequent PHB production. The model was validated based on independent experimental data sets, showing a good agreement between experimental data and simulation results.

The use of NaCl addition for the improvement of polyhydroxyalkanoate production by Cupriavidus necator

External stress factors in the form of ionic species or temperature increases have been shown to produce a stress response leading to enhanced PHA production. The effect of five different NaCl concentrations, namely 3.5, 6.5, 9, 12 and 15 g/l NaCl on PHA productivity using Cupriavidus necator has been investigated alongside a control (no added NaCl). A dielectric spectroscopy probe was used to measure PHA accumulation online in conjunction with the chemical offline analysis of PHA. The highest PHA production was obtained with the addition of 9 g/l NaCl, which yielded 30% higher PHA than the control. Increasing the addition of NaCl to 15 g/l was found to inhibit the production of PHA. NaCl addition can therefore be used as a simple, low cost, sustainable, non toxic and non reactive external stress strategy for increasing PHA productivity.

Acidogenic spent wash valorization through polyhydroxyalkanoate (PHA) synthesis coupled with fermentative biohydrogen production

The production of polyhydroxyalkanoates (PHAs) by Bacillus tequilensis biocatalyst using spent wash effluents as substrate was evaluated to increase the versatility of the existing PHA production process and reduce production cost. In this study, spent wash was used as a substrate for biohydrogen (H2) production and the resulting acidogenic effluents were subsequently employed as substrate for PHA production. Maximum H2 production of 39.8L and maximum PHA accumulation of 40% dry cell weight was attained. Good substrate removal associated with decrement in acidification (53% to 15%) indicates that the VFA generated were effectively utilized for PHA production. The PHA composition showed presence of copolymer [P (3HB-co-3HV)] with varying contents of hydroxybutyrate and hydroxyvalerate. The results obtained suggest that the use of spent wash effluents as substrate can considerably reduce the production cost of PHA with simultaneous waste valorization. PHA synthesis with B. tequilensis and spent wash effluents is reported for the first time.

Comparative study on the production of poly(3-hydroxybutyrate) by thermophilic Chelatococcus daeguensis TAD1: a good candidate for large-scale production

In spite of numerous advantages on operating fermentation at elevated temperatures, very few thermophilic bacteria with polyhydroxyalkanoates (PHAs)-accumulating ability have yet been found in contrast to the tremendous mesophiles with the same ability. In this study, a thermophilic poly(3-hydroxybutyrate) (PHB)-accumulating bacteria (Chelatococcus daeguensis TAD1), isolated from the biofilm of a biotrickling filter used for NOx removal, was extensively investigated and compared to other PHB-accumulating bacteria. The results demonstrate that C. daeguensis TAD1 is a growth-associated PHB-accumulating bacterium without obvious nutrient limitation, which was capable of accumulating PHB up to 83.6 % of cell dry weight (CDW, w/w) within just 24 h at 45 °C from glucose. Surprisingly, the PHB production of C. daeguensis TAD1 exhibited strong tolerance to high heat stress as well as nitrogen loads compared to that of other PHB-accumulating bacterium, while the optimal PHB amount (3.44 ± 0.3 g l(-1)) occurred at 50 °C and C/N = 30 (molar) with glucose as the sole carbon source. In addition, C. daeguensis TAD1 could effectively utilize various cheap substrates (starch or glycerol) for PHB production without pre-hydrolyzed, particularly the glycerol, exhibiting the highest product yield (Y P/S, 0.26 g PHB per gram substrate used) as well as PHB content (80.4 % of CDW, w/w) compared to other carbon sources. Consequently, C. daeguensis TAD1 is a viable candidate for large-scale production of PHB via utilizing starch or glycerol as the raw materials.