The influence of supramolecular structure of cellulose allomorphs on the interactions with cellulose-binding domain, CBD3b from Paenibacillus barcinonensis

Carboxymethyl Scleroglucan Synthesized via O-Alkylation Reaction with Different Degrees of Substitution: Rheology and Thermal Stability

This paper presents the methodology for synthesizing and characterizing two carboxymethyl EOR-grade Scleroglucans (CMS-A and CMS-B). An O-Alkylation reaction was used to insert a hydrophilic group (monochloroacetic acid-MCAA) into the biopolymer's anhydroglucose subunits (AGUs). The effect of the degree of the carboxymethyl substitution on the rheology and thermal stability of the Scleroglucan (SG) was also evaluated. Simultaneous thermal analysis (STA/TGA-DSC), differential scanning calorimetry (DSC), X-ray Diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Scanning Electron Microscopy, and Energy Dispersive Spectroscopy (SEM/EDS) were employed to characterize both CMS products. FTIR analysis revealed characteristic peaks corresponding to the carboxymethyl functional groups, confirming the modification. Also, SEM analysis provided insights into the structural changes in the polysaccharide after the O-Alkylation reaction. TGA results showed that the carboxymethylation of SG lowered its dehydroxylation temperature but increased its thermal stability above 300 °C. The CMS products and SG exhibited a pseudoplastic behavior; however, lower shear viscosities and relaxation times were observed for the CMS products due to the breakage of the SG triple helix for the chemical modification. Despite the viscosity results, the modified Scleroglucans are promising candidates for developing new engineering materials for EOR processes.

High throughput disassembly of cellulose nanoribbons and colloidal stabilization of gel-like Pickering emulsions

We introduce a strategy to disintegrate cellulose microfibrils present in the cell walls of plant fibers. The process includes impregnation and mild oxidation followed by ultrasonication, which loosens the hydrophilic planes of crystalline cellulose while preserving the hydrophobic ones. The resultant molecularly-sized cellulose structures (cellulose ribbons, CR) retain a length of the order of a micron (1.47 ± 0.48 μm, AFM). A very high axial aspect ratio is determined (at least 190), considering the CR height (0.62 ± 0.38 nm, AFM), corresponding to 1-2 cellulose chains, and width (7.64 ± 1.82 nm, TEM). The new molecularly-thin cellulose proposes excellent hydrophilicity and flexibility, enabling a remarkable viscosifying effect when dispersed in aqueous media (shear-thinning, zero shear viscosity of 6.3 × 10⁵ mPa·s). As such, CR suspensions readily develop into gel-like Pickering emulsions in the absence of crosslinking, suitable for direct ink writing at ultra-low solids content.

Ni-doped MoS2 embedded in natural wood containing porous cellulose for piezo-catalytic degradation of tetracycline

Wood is a natural material with low cost and easy recovery, which porous, layered, excellent structure and mechanical properties make it possible to apply in wastewater treatment. We have successfully grown MoS₂ on natural wood containing porous cellulose and introduced the high conductivity circuit path provided by Ni nanoparticles to construct a new piezoelectric three-dimensional wood block for the efficient degradation of tetracycline. Ni/MoS₂/Wood exhibited excellent piezo-catalytic degradation performance, and the degradation rate of tetracycline reached 95.96 % (k = 0.0411 min^-1) under ultrasonic vibration. After 5 cycles, the degradation rate still reached 90.20 %. In addition, Ni/MoS₂/Wood was used as the reactor filler to degrade tetracycline through piezoelectric response triggered by hydrodynamic force, and the degradation rate reached 90.27 % after 60 min. Further, the mechanism and the possible degradation pathways of tetracycline degradation were proposed. This low-cost, recyclable and stable three-dimensional wood block piezoelectric material provides a new idea for the practical application of wastewater treatment.

Alkalization of Kraft Pulps from Pine and Eucalyptus and Its Effect on Enzymatic Saccharification and Viscosity Control of Cellulose

Bleached kraft pulps from eucalyptus and pine were subjected to cold caustic extraction (CCE) with NaOH (5, 10, 17.5, and 35%) for hemicelluloses removal and to increase cellulose accessibility. The effect of these changes was evaluated in enzymatic saccharification with the multicomponent Cellic CTec3 enzyme cocktail, and in viscosity reduction of pulps with the monocomponent Trichoderma reesei endoglucanase (EG). After CCE with 10% NaOH (CCE10) and 17.5% NaOH (CCE17.5), hemicellulose content lower than 1% was achieved in eucalyptus and pine pulps, respectively. At these concentrations, cellulose I started to be converted into cellulose II. NaOH concentrations higher than 17.5% decreased the intrinsic viscosity (from 730 to 420 mL/g in eucalyptus and from 510 to 410 mL/g in pine). Cellulose crystallinity was reduced from 60% to 44% in eucalyptus and from 71% to 44% in pine, as the NaOH concentration increased. Enzymatic multicomponent saccharification showed higher glucose yields in all CCE-treated eucalyptus samples (up to 93%) while only CCE17.5 and CCE35 pine pulps achieved 90% after 40 h of incubation. Untreated bleached pulps of both species presented saccharification yields lower than 70%. When monocomponent EG was used to treat the same pulps, depending on enzyme charge and incubation time, a wide range of intrinsic viscosity reduction was obtained (up to 74%). Results showed that eucalyptus pulps are more accessible and easier to hydrolyze by enzymes than pine pulps and that the conversion of cellulose I to cellulose II hydrate only has the effect of increasing saccharification of CCE pine samples. Viscosity reduction of CCE pulps and EG treated pulps were obtained in a wide range indicating that pulps presented characteristics suitable for cellulose derivatives production.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Production of beta-galactosidase fused to a cellulose-binding domain for application in sustainable industrial processes

This study aimed to produce and characterize a recombinant Kluyveromyces sp. β-galactosidase fused to a cellulose-binding domain (CBD) for industrial application. In expression assays, the highest enzymatic activities occurred after 48 h induction on Escherichia coli C41(DE3) strain at 20 °C in Terrific Broth (TB) culture medium, using isopropyl β-d-1-thiogalactopyranoside (IPTG) 0.5 mM (108.77 U/mL) or lactose 5 g/L (93.10 U/mL) as inducers. Cultures at bioreactor scale indicated that higher product yield values in relation to biomass (2000 U/g) and productivity (0.72 U/mL.h) were obtained in culture media containing higher protein concentration. The recombinant enzyme showed high binding affinity to nanocellulose, reaching both immobilization yield and efficiency values of approximately 70% at pH 7.0 after 10 min reaction. The results of the present study pointed out a strategy for recombinant β-galactosidase-CBD production and immobilization, aiming toward the application in sustainable industrial processes using low-cost inputs.