3-Amino-4-hydroxybenzoic acid production from sweet sorghum juice by recombinant Corynebacterium glutamicum

Copaifera mildbraedii Desf.: Phytochemical Composition of Extracts, Essential Oil, and In Vitro Biological Activities of Bark

Copaifera mildbraedii Desf. is an evergreen tree with an umbrella-like crown. It is distributed from south-eastern Nigeria eastward to the Central African Republic (CAR). The aim of this study was to assess the chemical composition and biological activities of C. mildbraedii bark, as well as the chemical composition of the essential oil. Ethyl acetate (EtOAc) and methanol (MeOH) extracts showed a high total phenolic content (TPC) (149.9 and 148.8 mg GAE/g dry residue (dr), respectively), which was related to good antioxidant activity (DPPH) with an IC50 of 21.2 and 12.9 µg/mL, respectively. High-performance liquid chromatography coupled with diode array detector (HPLC-DAD) analysis revealed seven phenolic compounds with myricitrin (13.3 mg/g dr) and 2,4-dihydroxy-3,6-dimethyl benzoic acid (30.7 mg/g dr) as major compounds, while gas chromatography-mass spectrometry (GC-MS) analysis enabled detection of 13 volatile compounds (3 before and 10 after derivatization). Thirty compounds were identified in the essential oil, which corresponds to 65% of all identified compounds. Among the latter, E,E-farnesylacetone and γ-gurjunene were considered as major compounds (8.08 and 10.43%, respectively). The EtOAc extract showed a potent potential, simultaneously, against anti-acetylcholinesterase (AChE), anti-15-lipoxygenase (15-LOX), anti-xanthine oxidase (XOD), and cytotoxic (OVCAR) activities, whereas cyclohexane (CYHA) and dichloromethane (DCM) extracts showed a cytotoxic effect with high percentages of inhibition (95.2%).

A 4-hydroxybenzoate 3-hydroxylase mutant enables 4-amino-3-hydroxybenzoic acid production from glucose in Corynebacterium glutamicum

BACKGROUND

Microbial production of aromatic chemicals is an attractive method for obtaining high-performance materials from biomass resources. A non-proteinogenic amino acid, 4-amino-3-hydroxybenzoic acid (4,3-AHBA), is expected to be a precursor of highly functional polybenzoxazole polymers; however, methods for its microbial production have not been reported. In this study, we attempted to produce 4,3-AHBA from glucose by introducing 3-hydroxylation of 4-aminobenzoic acid (4-ABA) into the metabolic pathway of an industrially relevant bacterium, Corynebacterium glutamicum.

RESULTS

Six different 4-hydroxybenzoate 3-hydroxylases (PHBHs) were heterologously expressed in C. glutamicum strains, which were then screened for the production of 4,3-AHBA by culturing with glucose as a carbon source. The highest concentration of 4,3-AHBA was detected in the strain expressing PHBH from Caulobacter vibrioides (CvPHBH). A combination of site-directed mutagenesis in the active site and random mutagenesis via laccase-mediated colorimetric assay allowed us to obtain CvPHBH mutants that enhanced 4,3-AHBA productivity under deep-well plate culture conditions. The recombinant C. glutamicum strain expressing CvPHBHM106A/T294S and having an enhanced 4-ABA biosynthetic pathway produced 13.5 g/L (88 mM) 4,3-AHBA and 0.059 g/L (0.43 mM) precursor 4-ABA in fed-batch culture using a nutrient-rich medium. The culture of this strain in the chemically defined CGXII medium yielded 9.8 C-mol% of 4,3-AHBA from glucose, corresponding to 12.8% of the theoretical maximum yield (76.8 C-mol%) calculated using a genome-scale metabolic model of C. glutamicum.

CONCLUSIONS

Identification of PHBH mutants that could efficiently catalyze the 3-hydroxylation of 4-ABA in C. glutamicum allowed us to construct an artificial biosynthetic pathway capable of producing 4,3-AHBA on a gram-scale using glucose as the carbon source. These findings will contribute to a better understanding of enzyme-catalyzed regioselective hydroxylation of aromatic chemicals and to the diversification of biomass-derived precursors for high-performance materials.

3-Amino-4-hydroxybenzoic acid production from glucose and/or xylose via recombinant Streptomyces lividans

The aromatic compound 3-amino-4-hydroxybenzoic acid (3,4-AHBA) can be employed as a raw material for high-performance industrial plastics. The aim of this study is to produce 3,4-AHBA via a recombinant Streptomyces lividans strain containing griI and griH genes derived from Streptomyces griseus using culture medium with glucose and/or xylose, which are the main components in lignocellulosic biomass. Production of 3,4-AHBA by the recombinant S. lividans strain was successful, and the productivity was affected by the kind of sugar used as an additional carbon source. Metabolic profiles revealed that L aspartate-4-semialdehyde (ASA), a precursor of 3,4-AHBA, and coenzyme NADPH were supplied in greater amounts in xylose medium than in glucose medium. Moreover, cultivation in TSB medium with a mixed sugar (glucose/xylose) was found to be effective for 3,4-AHBA production, and optimal conditions for efficient production were designed by changing the ratio of glucose to xylose. The best productivity of 2.70 g/L was achieved using a sugar mixture of 25 g/L glucose and 25 g/L xylose, which was 1.5 times higher than the result using 50 g/L glucose alone. These results suggest that Streptomyces is a suitable candidate platform for 3,4-AHBA production from lignocellulosic biomass-derived sugars under appropriate culture conditions.

Metabolites Profiling of Manilkara mabokeensis Aubrév Bark and Investigation of Biological Activities

Manilkara mabokeensis Aubrév is a tree that belongs to the Sapotaceae family, native to the tropical forest in Latin America, Asia, Australia, and Africa. The bark of this species is used as traditional medicine to treat diseases. The present study is the first phytochemical investigation on M. mabokeensis Aubrév bark in terms of phytochemical composition and bioactivity. Among the different extracts, ethyl acetate (EtOAc) exhibited the highest values of total phenolic content (TPC), total flavonoid content (TFC), condensed tannin content (CTC), and reducing sugar content, as well as a high antioxidant activity. Interestingly, gas chromatography-flame ionization detector (GC-FID) and gas chromatography-mass spectrometry (GC-MS) analysis were enabled to identify 23 compounds in the essential oil of M. mabokeensis Aubrév bark, which have not been previously described in the literature. Phytol and 8,14-cedranoxide were the major identified compounds, with area percentages of 27.9 and 18.8%, respectively. For HPLC analysis, 3,4-dihydroxy-benzoic acid methyl ester showed the highest concentration with 61.8 mg/g of dry residue (dr) among other identified molecules. Manilkara mabokeensis Aubrév bark MeOH extract showed a good anti-15-lipoxygenase (anti-15-LOX) and anti-acetylcholinesterase (anti-AChE) activities of 65.8 and 71.0%, respectively, while it exhibited a moderate antixanthine oxidase (anti-XOD) activity (41.5%) at 50 μg/mL. Furthermore, cyclohexane (CYHA) and ethyl acetate induced the highest cytotoxicity against the human ovarian cancer cell lines, OVCAR (49.5%) and IGROV (48.7%), respectively. Taken together, obtained results argue that M. mabokeensis Aubrév bark is an excellent source of natural compounds and justify its use in folk medicine.

Metabolic Engineering for Valorization of Agri- and Aqua-Culture Sidestreams for Production of Nitrogenous Compounds by Corynebacterium glutamicum

Corynebacterium glutamicum is used for the million-ton-scale production of amino acids. Valorization of sidestreams from agri- and aqua-culture has focused on the production of biofuels and carboxylic acids. Nitrogen present in various amounts in sidestreams may be valuable for the production of amines, amino acids and other nitrogenous compounds. Metabolic engineering of C. glutamicum for valorization of agri- and aqua-culture sidestreams addresses to bridge this gap. The product portfolio accessible via C. glutamicum fermentation primarily features amino acids and diamines for large-volume markets in addition to various specialty amines. On the one hand, this review covers metabolic engineering of C. glutamicum to efficiently utilize components of various sidestreams. On the other hand, examples of the design and implementation of synthetic pathways not present in native metabolism to produce sought after nitrogenous compounds will be provided. Perspectives and challenges of this concept will be discussed.

Recent advances in lignocellulosic biomass white biotechnology for bioplastics

Lignocellulosic biomass has great potential as an inedible feedstock for bioplastic synthesis, although its use is still limited compared to current edible feedstocks of glucose and starch. This review focuses on recent advances in the production of biopolymers and biomonomers from lignocellulosic feedstocks with downstream processing and chemical polymer syntheses. In microbial production, four routes composed of existing poly (lactic acid) and polyhydroxyalkanoates (PHAs) and the emerging biomonomers of itaconic acid and aromatic compounds were presented to review present challenges and future perspectives, focusing on the use of lignocellulosic feedstocks. Recently, advances in purification technologies decreased the number of processes and their environmental burden. Additionally, the unique structures and high-performance of emerging lignocellulose-based bioplastics have expanded the possibilities for the use of bioplastics. The sequence of processes provides insight into the emerging technologies that are needed for the practical use of bioplastics made from lignocellulosic biomass.

Enhanced production of γ-amino acid 3-amino-4-hydroxybenzoic acid by recombinant Corynebacterium glutamicum under oxygen limitation

Background

Bio-based aromatic compounds are of great interest to the industry, as commercial production of aromatic compounds depends exclusively on the unsustainable use of fossil resources or extraction from plant resources. γ-amino acid 3-amino-4-hydroxybenzoic acid (3,4-AHBA) serves as a precursor for thermostable bioplastics.

Results

Under aerobic conditions, a recombinant Corynebacterium glutamicum strain KT01 expressing griH and griI genes derived from Streptomyces griseus produced 3,4-AHBA with large amounts of amino acids as by-products. The specific productivity of 3,4-AHBA increased with decreasing levels of dissolved oxygen (DO) and was eightfold higher under oxygen limitation (DO = 0 ppm) than under aerobic conditions (DO ≥ 2.6 ppm). Metabolic profiles during 3,4-AHBA production were compared at three different DO levels (0, 2.6, and 5.3 ppm) using the DO-stat method. Results of the metabolome analysis revealed metabolic shifts in both the central metabolic pathway and amino acid metabolism at a DO of < 33% saturated oxygen. Based on this metabolome analysis, metabolic pathways were rationally designed for oxygen limitation. An ldh deletion mutant, with the loss of lactate dehydrogenase, exhibited 3.7-fold higher specific productivity of 3,4-AHBA at DO = 0 ppm as compared to the parent strain KT01 and produced 5.6 g/L 3,4-AHBA in a glucose fed-batch culture.

Conclusions

Our results revealed changes in the metabolic state in response to DO concentration and provided insights into oxygen supply during fermentation and the rational design of metabolic pathways for improved production of related amino acids and their derivatives.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01714-z.

Advances in metabolic engineering of Corynebacterium glutamicum to produce high-value active ingredients for food, feed, human health, and well-being

The soil microbe Corynebacterium glutamicum is a leading workhorse in industrial biotechnology and has become famous for its power to synthetise amino acids and a range of bulk chemicals at high titre and yield. The product portfolio of the microbe is continuously expanding. Moreover, metabolically engineered strains of C. glutamicum produce more than 30 high value active ingredients, including signature molecules of raspberry, savoury, and orange flavours, sun blockers, anti-ageing sugars, and polymers for regenerative medicine. Herein, we highlight recent advances in engineering of the microbe into novel cell factories that overproduce these precious molecules from pioneering proofs-of-concept up to industrial productivity.

Anti-virulence activities of biflavonoids from Mesua ferrea L. flower

Based on the anti-virulence activity on Salmonella, the ethyl acetate extract (EAE) of Mesua ferrea flower was investigated for its chemical constituents. Ten purified compounds were identified and assayed for their inhibitory activity against Type III secretion system (T3SS) by polyacrylamide gel electrophoresis (SDS-PAGE) and Western blots experiments. We found the biflavonoids, rhusflavanone and mesuaferrone B, exhibited inhibitory effects on the secretion of Salmonella pathogenicity island 1 (SPI-1) effector proteins (SipA, B, C and D) without effecting the bacterial growth. In addition, 5, 6, 6'-trihydroxy-[1,1'-biphenyl]-3,3'-dicarboxylic acid (6) is a new natural product from M. ferrea flower.

Microbial conversion of biomass into bio-based polymers

The worldwide market for plastics is rapidly growing, and plastics polymers are typically produced from petroleum-based chemicals. The overdependence on petroleum-based chemicals for polymer production raises economic and environmental sustainability concerns. Recent progress in metabolic engineering has expanded fermentation products from existing aliphatic acids or alcohols to include aromatic compounds. This diversity provides an opportunity to expand the development and industrial uses of high-performance bio-based polymers. However, most of the biomonomers are produced from edible sugars or starches that compete directly with food and feed uses. The present review focuses on recent progress in the microbial conversion of biomass into bio-based polymers, in which fermentative products from renewable feedstocks serve as biomonomers for the synthesis of bio-based polymers. In particular, the production of biomonomers from inedible lignocellulosic feedstocks by metabolically engineered microorganisms and the synthesis of bio-based engineered plastics from the biological resources are discussed.

Current status on metabolic engineering for the production of l-aspartate family amino acids and derivatives

The l-aspartate amino acids (AFAAs) are constituted of l-aspartate, l-lysine, l-methionine, l-threonine and l-isoleucine. Except for l-aspartate, AFAAs are essential amino acids that cannot be synthesized by humans and most farm animals, and thus possess wide applications in food, animal feed, pharmaceutical and cosmetics industries. To date, a number of amino acids, including AFAAs have been industrially produced by microbial fermentation. However, the overall metabolic and regulatory mechanisms of the synthesis of AFAAs and the recent progress on strain construction have rarely been reviewed. Aiming to promote the establishment of strains of Corynebacterium glutamicum and Escherichia coli, the two industrial amino acids producing bacteria, that are capable of producing high titers of AFAAs and derivatives, this paper systematically summarizes the current progress on metabolic engineering manipulations in both central metabolic pathways and AFAA synthesis pathways based on the category of the five-word strain breeding strategies: enter, flow, moderate, block and exit.

Taurine does not affect the composition, diversity, or metabolism of human colonic microbiota simulated in a single-batch fermentation system

Accumulating evidence suggests that dietary taurine (2-aminoethanesulfonic acid) exerts beneficial anti-inflammatory effects in the large intestine. In this study, we investigated the possible impact of taurine on human colonic microbiota using our single-batch fermentation system (Kobe University Human Intestinal Microbiota Model; KUHIMM). Fecal samples from eight humans were individually cultivated with and without taurine in the KUHIMM. The results showed that taurine remained largely undegraded after 30 h of culturing in the absence of oxygen, although some 83% of the taurine was degraded after 30 h of culturing under aerobic conditions. Diversity in bacterial species in the cultures was analyzed by 16S rRNA gene sequencing, revealing that taurine caused no significant change in the diversity of the microbiota; both operational taxonomic unit and Shannon-Wiener index of the cultures were comparable to those of the respective source fecal samples. In addition, principal coordinate analysis indicated that taurine did not alter the composition of bacterial species, since the 16S rRNA gene profile of bacterial species in the original fecal sample was maintained in each of the cultures with and without taurine. Furthermore, metabolomic analysis revealed that taurine did not affect the composition of short-chain fatty acids produced in the cultures. These results, under these controlled but artificial conditions, suggested that the beneficial anti-inflammatory effects of dietary taurine in the large intestine are independent of the intestinal microbiota. We infer that dietary taurine may act directly in the large intestine to exert anti-inflammatory effects.

Bioprocessing of bio-based chemicals produced from lignocellulosic feedstocks

The feedstocks used for the production of bio-based chemicals have recently expanded from edible sugars to inedible and more recalcitrant forms of lignocellulosic biomass. To produce bio-based chemicals from renewable polysaccharides, several bioprocessing approaches have been developed and include separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and consolidated bioprocessing (CBP). In the last decade, SHF, SSF, and CBP have been used to generate macromolecules and aliphatic and aromatic compounds that are capable of serving as sustainable, drop-in substitutes for petroleum-based chemicals. The present review focuses on recent progress in the bioprocessing of microbially produced chemicals from renewable feedstocks, including starch and lignocellulosic biomass. In particular, the technological feasibility of bio-based chemical production is discussed in terms of the feedstocks and different bioprocessing approaches, including the consolidation of enzyme production, enzymatic hydrolysis of biomass, and fermentation.

Engineering cell factories for producing building block chemicals for bio-polymer synthesis

Synthetic polymers are widely used in daily life. Due to increasing environmental concerns related to global warming and the depletion of oil reserves, the development of microbial-based fermentation processes for the production of polymer building block chemicals from renewable resources is desirable to replace current petroleum-based methods. To this end, strains that efficiently produce the target chemicals at high yields and productivity are needed. Recent advances in metabolic engineering have enabled the biosynthesis of polymer compounds at high yield and productivities by governing the carbon flux towards the target chemicals. Using these methods, microbial strains have been engineered to produce monomer chemicals for replacing traditional petroleum-derived aliphatic polymers. These developments also raise the possibility of microbial production of aromatic chemicals for synthesizing high-performance polymers with desirable properties, such as ultraviolet absorbance, high thermal resistance, and mechanical strength. In the present review, we summarize recent progress in metabolic engineering approaches to optimize microbial strains for producing building blocks to synthesize aliphatic and high-performance aromatic polymers.