Integrated bioconversion of pulp and paper primary sludge to second generation bioethanol using Saccharomyces cerevisiae ATCC 26602

Enzymatic hydrolysis of waste streams originating from wastewater treatment plants

BACKGROUND

Achieving climate neutrality is a goal that calls for action in all sectors. The requirements for improving waste management and reducing carbon emissions from the energy sector present an opportunity for wastewater treatment plants (WWTPs) to introduce sustainable waste treatment practices. A common biotechnological approach for waste valorization is the production of sugars from lignocellulosic waste biomass via biological hydrolysis. WWTPs produce waste streams such as sewage sludge and screenings which have not yet been fully explored as feedstocks for sugar production yet are promising because of their carbohydrate content and the lack of lignin structures. This study aims to explore the enzymatic hydrolysis of various waste streams originating from WWTPs by using a laboratory-made and a commercial cellulolytic enzyme cocktail for the production of sugars. Additionally, the impact of lipid and protein recovery from sewage sludge prior to the hydrolysis was assessed.

RESULTS

Treatment with a laboratory-made enzyme cocktail produced by Irpex lacteus (IL) produced 31.2 mg sugar per g dry wastewater screenings. A commercial enzyme formulation released 101 mg sugar per g dry screenings, corresponding to 90% degree of saccharification. There was an increase in sugar levels for all sewage substrates during the hydrolysis with IL enzyme. Lipid and protein recovery from primary and secondary sludge prior to the hydrolysis with IL enzyme was not advantageous in terms of sugar production.

CONCLUSIONS

The laboratory-made fungal IL enzyme showed its versatility and possible application beyond the typical lignocellulosic biomass. Wastewater screenings are well suited for valorization through sugar production by enzymatic hydrolysis. Saccharification of screenings represents a viable strategy to divert this waste stream from landfill and achieve the waste treatment and renewable energy targets set by the European Union. The investigation of lipid and protein recovery from sewage sludge showed the challenges of integrating resource recovery and saccharification processes.

Pulp-paper industry sludge waste biorefinery for sustainable energy and value-added products development: A systematic valorization towards waste management

The pulp-paper industry is one of the main industrial sectors that produce massive amounts of residual sludge, constituting an enormous environmental burden for the industries. Traditional sludge management practices, such as landfilling and incineration, are restricted due to mounting environmental pressures, complex regulatory frameworks, land availability, high costs, and public opinion. Valorization of pulp-paper industry sludge (PPS) to produce high-value products is a promising substitute for traditional sludge management practices, promoting their reuse and recycling. Valorization of PPIS for biorefinery beneficiation includes biomethane, biohydrogen, bioethanol, biobutanol, and biodiesel production for renewable energy generation. Additionally, the various thermo-chemical technologies can be utilized to synthesize bio-oil, hydrochar, biochar, adsorbent, and activated carbon, signifying potential for value-added generation. Moreover, PPIS can be recycled as a byproduct by incorporating it into nanocomposites, cardboard, and construction materials development. This paper aims to deliver a comprehensive overview of PPIS management approaches and thermo-chemical technologies utilized for the development of platform chemicals in industry. Substitute uses of PPIS, such as making building materials, developing supercapacitors, and making cardboard, are also discussed. In addition, this article deeply discusses recent developments in biotechnologies for valorizing PPIS to yield an array of valuable products, such as biofuels, lactic acids, cellulose, nanocellulose, and so on. This review serves as a roadmap for future research endeavors in the effective handling of PPIS.

Getting Value from Pulp and Paper Industry Wastes: On the Way to Sustainability and Circular Economy

The pulp and paper industry is recognized as a well-established sector, which throughout its process, generates a vast amount of waste streams with the capacity to be valorized. Typically, these residues are burned for energy purposes, but their use as substrates for biological processes could be a more efficient and sustainable alternative. With this aim, it is essential to identify and characterize each type of waste to determine its biotechnological potential. In this context, this research highlights possible alternatives with lower environmental impact and higher revenues. The bio-based pathway should be a promising alternative for the valorization of pulp and paper industry wastes, in particular for bioproduct production such as bioethanol, polyhydroxyalkanoates (PHA), and biogas. This article focuses on state of the art regarding the identification and characterization of these wastes, their main applied deconstruction technologies and the valorization pathways reported for the production of the abovementioned bioproducts.

Bioethanol Production from Cellulose-Rich Corncob Residue by the Thermotolerant Saccharomyces cerevisiae TC-5

This study aimed to select thermotolerant yeast for bioethanol production from cellulose-rich corncob (CRC) residue. An effective yeast strain was identified as Saccharomyces cerevisiae TC-5. Bioethanol production from CRC residue via separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and prehydrolysis-SSF (pre-SSF) using this strain were examined at 35-42 °C compared with the use of commercial S. cerevisiae. Temperatures up to 40 °C did not affect ethanol production by TC-5. The ethanol concentration obtained via the commercial S. cerevisiae decreased with increasing temperatures. The highest bioethanol concentrations obtained via SHF, SSF, and pre-SSF at 35-40 °C of strain TC-5 were not significantly different (20.13-21.64 g/L). The SSF process, with the highest ethanol productivity (0.291 g/L/h), was chosen to study the effect of solid loading at 40 °C. A CRC level of 12.5% (w/v) via fed-batch SSF resulted in the highest ethanol concentrations of 38.23 g/L. Thereafter, bioethanol production via fed-batch SSF with 12.5% (w/v) CRC was performed in 5-L bioreactor. The maximum ethanol concentration and ethanol productivity values were 31.96 g/L and 0.222 g/L/h, respectively. The thermotolerant S. cerevisiae TC-5 is promising yeast for bioethanol production under elevated temperatures via SSF and the use of second-generation substrates.

Enzymatic Hydrolysis of Softwood Derived Paper Sludge by an In Vitro Recombinant Cellulase Cocktail for the Production of Fermentable Sugars

Paper sludge is an attractive biomass feedstock for bioconversion to ethanol due to its low cost and the lack of pretreatment required for its bioprocessing. This study assessed the use of a recombinant cellulase cocktail (mono-components: S. cerevisiae-derived PcBGL1B (BGL), TeCel7A (CBHI), ClCel6A (CBHII) and TrCel5A (EGII) mono-component cellulase enzymes) for the efficient saccharification of softwood-derived paper sludge to produce fermentable sugars. The paper sludge mainly contained 74.3% moisture and 89.7% (per dry mass (DM)) glucan with a crystallinity index of 91.5%. The optimal protein ratio for paper sludge hydrolysis was observed at 9.4: 30.2: 30.2: 30.2% for BGL: CBHI: CBHII: EGII. At a protein loading of 7.5 mg/g DW paper sludge, the yield from hydrolysis was approximately 80%, based on glucan, with scanning electron microscopy micrographs indicating a significant alteration in the microfibril size (length reduced from ≥ 2 mm to 93 µm) of the paper sludge. The paper sludge hydrolysis potential of the Opt CelMix (formulated cellulase cocktail) was similar to the commercial Cellic CTec2® and Celluclast® 1.5 L cellulase preparations and better than Viscozyme® L. Low enzyme loadings (15 mg/g paper sludge) of the Opt CelMix and solid loadings ranging between 1 to 10% (w/v) rendered over 80% glucan conversion. The high glucose yields attained on the paper sludge by the low enzyme loading of the Opt CelMix demonstrated the value of enzyme cocktail optimisation on specific substrates for efficient cellulose conversion to fermentable sugars.

Second Generation Bioethanol Production: On the Use of Pulp and Paper Industry Wastes as Feedstock

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production.