Tertiary wastewater treatment in membrane photobioreactor using microalgae: Comparison of forward osmosis & microfiltration

An insight on pollutant removal mechanisms in phycoremediation of textile wastewater

Pollutants, including dyes and heavy metals from textile industrial discharge, adversely affect the surface and groundwater resources, and pose a severe risk to the living organisms in the ecosystem. Phycoremediation of wastewater is now an emerging trend, as it is colossally available, inexpensive, eco-friendly, and has many other benefits, with high removal efficiency for undesirable substances, when compared to conventional treatment methods. Algae have a good binding affinity toward nutrients and toxic compounds because of various functional groups on its cell surface by following the mechanisms such as biosorption, bioaccumulation, or alternate biodegradation pathway. Algae-based treatments generate bioenergy feedstock as sludge, mitigate CO2, synthesize high-value-added products, and release oxygenated effluent. Algae when converted into activated carbon also show good potential against contaminants, because of its higher binding efficiency and surface area. This review provides an extensive analysis of different mechanisms involved in removal of undesirable and hazardous substances from textile wastewater using algae as green technology. It could be founded that both biosorption and biodegradation mechanisms were responsible for the removal of dye, organic, and inorganic pollutants. But for the heavy metals removal, biosorption results in higher removal efficiency. Overall, phycoremediation is a convenient technique for substantial conserving of energy demand, reducing greenhouse gas emissions, and removing pollutants.

A bibliometric analysis of published literature on membrane photobioreactors for wastewater treatment from 2000 to 2022

With the focus on limiting greenhouse gas emissions, microalgae-based technology is a promising approach for wastewater treatment, combining cost-effective operation, nutrient recovery, and assimilation of CO2. In addition, membrane technology supports process intensification and wastewater reclamation. Based on a bibliometric analysis, this paper evaluated the literature on membrane photobioreactors to highlight promising areas for future research. Specifically, efforts should be made on advancing knowledge of interactions between algae and bacteria, analysing different strategies for membrane fouling control and determining the conditions for the most cost-effective operation. The Scopus® database was used to select documents from 2000 to 2022. A set of 126 documents were found. China is the country with the highest number of publications, whereas the most productive researchers belong to the Universitat Politècnica de València (Spain). The analysis of 50 selected articles provides a summary of the main parameters investigated, that focus in increasing the biomass productivity and nutrient removal. In addition, microalgal-bacterial membrane photobioreactor seems to have the greatest commercialisation potential. S-curve fitting confirms that this technology is still in its growth stage.

Membrane Technologies for Nitrogen Recovery from Waste Streams: Scientometrics and Technical Analysis

The concerns regarding the reactive nitrogen levels exceeding the planetary limits are well documented in the literature. A large portion of anthropogenic nitrogen ends in wastewater. Nitrogen removal in typical wastewater treatment processes consumes a considerable amount of energy. Nitrogen recovery can help in saving energy and meeting the regulatory discharge limits. This has motivated researchers and industry professionals alike to devise effective nitrogen recovery systems. Membrane technologies form a fundamental part of these systems. This work presents a thorough overview of the subject using scientometric analysis and presents an evaluation of membrane technologies guided by literature findings. The focus of nitrogen recovery research has shifted over time from nutrient concentration to the production of marketable products using improved membrane materials and designs. A practical approach for selecting hybrid systems based on the recovery goals has been proposed. A comparison between membrane technologies in terms of energy requirements, recovery efficiency, and process scale showed that gas permeable membrane (GPM) and its combination with other technologies are the most promising recovery techniques and they merit further industry attention and investment. Recommendations for potential future search trends based on industry and end users' needs have also been proposed.

Data-driven analysis on immobilized microalgae system: New upgrading trends for microalgal wastewater treatment

Microalgal immobilization is receiving increasing attention as one of the most viable alternatives for upgrading conventional wastewater treatment. However, an in-depth discussion of the state-of-the-art and limitations of available technologies is currently lacking. More importantly, the reason for the hesitant development of immobilized microalgae for wastewater treatment remains unclear, which hinders its practical application. Thus, comprehensively understanding and evaluating details on immobilized microalgae is urgently needed, especially for the current advances of immobilization of microalgae in wastewater treatment over the last few decades. In this review, scientometric approach is used to explore research hotspots and visualize emerging trends. Data-driven analysis is used to scientifically and methodically determine hotspots in the current research on immobilized microalgal wastewater treatment, along with that the implicit inner connection underlying the frequent co-occurring terms was explored in depth. Four hotspots focusing on immobilized microalgae for wastewater treatment were identified, mainly demonstrating: (1) main factors including light, temperature and immobilization methods would majorly affect the treatment performance of immobilized microalgae; (2) immobilized microalgae membrane bioreactor, immobilized microalgae-based microbial fuel cell and immobilized microalgae-based bed reactor are three dominant treatment systems; (3) immobilized microalgae have a higher robustness and tolerance for treating various types of wastewater; and (4) a complete sustainable circle from wastewater treatment to resource conversion via the immobilized microalgae can be achieved. Finally, several new directions and new perspectives that expose the necessity for fulfilling further research and fundamental gaps are pointed out. Taken together, this review provides helpful information to facilitate the development of innovative and feasible immobilized microalgal technologies thus increasing their viability and sustainability.

Microalgae-Enabled Wastewater Remediation and Nutrient Recovery through Membrane Photobioreactors: Recent Achievements and Future Perspective

The use of microalgae for wastewater remediation and nutrient recovery answers the call for a circular bioeconomy, which involves waste resource utilization and ecosystem protection. The integration of microalgae cultivation and wastewater treatment has been proposed as a promising strategy to tackle the issues of water and energy source depletions. Specifically, microalgae-enabled wastewater treatment offers an opportunity to simultaneously implement wastewater remediation and valuable biomass production. As a versatile technology, membrane-based processes have been increasingly explored for the integration of microalgae-based wastewater remediation. This review provides a literature survey and discussion of recent progressions and achievements made in the development of membrane photobioreactors (MPBRs) for wastewater treatment and nutrient recovery. The opportunities of using microalgae-based wastewater treatment as an interesting option to manage effluents that contain high levels of nutrients are explored. The innovations made in the design of membrane photobioreactors and their performances are evaluated. The achievements pave a way for the effective and practical implementation of membrane technology in large-scale microalgae-enabled wastewater remediation and nutrient recovery processes.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

The Influence of Forward Osmosis Module Configuration on Nutrients Removal and Microalgae Harvesting in Osmotic Photobioreactor

Microalgae have attracted great interest recently due to their potential for nutrients removal from wastewater, renewable biodiesel production and bioactive compounds extraction. However, one major challenge in microalgal bioremediation and the algal biofuel process is the high energy cost of separating microalgae from water. Our previous studies demonstrated that forward osmosis (FO) is a promising technology for microalgae harvesting and dewatering due to its low energy consumption and easy fouling control. In the present study, two FO module configurations (side-stream and submerged) were integrated with microalgae (C. vulgaris) photobioreactor (PBR) in order to evaluate the system performance, including nutrients removal, algae harvesting efficiency and membrane fouling. After 7 days of operation, both systems showed effective nutrients removal. A total of 92.9%, 100% and 98.7% of PO₄-P, NH₃-N and TN were removed in the PBR integrated with the submerged FO module, and 82%, 96% and 94.8% of PO₄-P, NH₃-N and TN were removed in the PBR integrated with the side-stream FO module. The better nutrients removal efficiency is attributed to the greater algae biomass in the submerged FO-PBR where in situ biomass dewatering was conducted. The side-stream FO module showed more severe permeate flux loss and biomass loss (less dewatering efficiency) due to algae deposition onto the membrane. This is likely caused by the higher initial water flux associated with the side-stream FO configuration, resulting in more foulants being transported to the membrane surface. However, the side-stream FO module showed better fouling mitigation by simple hydraulic flushing than the submerged FO module, which is not convenient for conducting cleaning without interrupting the PBR operation. Taken together, our results suggest that side-stream FO configuration may provide a viable way to integrate with PBR for a microalgae-based treatment. The present work provides novel insights into the efficient operation of a FO-PBR for more sustainable wastewater treatment and effective microalgae harvesting.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Design and applications of photobioreactors- a review

There has been increasing attention in recent years on the use of photobioreactors for various biotechnological applications, especially for the cultivation of microalgae. Photobioreactors-based production of photosynthetic microorganisms furnish several advantages as minimising toxicity and providing improved conditions. However, the designing and scaling-up of photobioreactors (PBRs) remain a challenge. Due to huge capital investment and operating cost, there is a deficiency of suitable PBRs for development of photosynthetic microorganisms on large-scale. It is, therefore, highly desirable to understand the current state-of-the-art PBRs, their advantages and limitations so as to classify different PBRs as per their most suited applications. This review provides a holistic overview of the discreet features of diverse PBR designs and their purpose in microalgae growth and biohydrogen production and also summarizes the recent development in use of hybrid PBRs to increase their working efficiency and overall economics of their operation for the production of value-added products.

Pharmaceuticals and personal care products in aquatic environments and their removal by algae-based systems

The consumption of pharmaceuticals and personal care products (PPCPs) has been widely increasing, yet up to 90-95% of PPCPs consumed by human are excreted unmetabolized. Moreover, the most of PPCPs cannot be fully removed by wastewater treatment plants (WWTPs), which release PPCPs to natural water bodies, affecting aquatic ecosystems and potentially humans. This study sought to review the occurrence of PPCPs in natural water bodies globally, and assess the effects of important factors on the fluxes of pollutants into receiving waterways. The highest ibuprofen concentration (3738 ng/L) in tap water was reported in Nigeria, and the highest naproxen concentration (37,700 ng/L) was reported in groundwater wells in Penn State, USA. Moreover, the PPCPs have affected aquatic organisms such as fish. For instance, up to 24.4 × 10³ ng/g of atenolol was detected in P. lineatus. Amongst different technologies to eliminate PPCPs, algae-based systems are environmentally friendly and effective because of the photosynthetic ability of algae to absorb CO₂ and their flexibility to grow in different wastewater. Up to 99% of triclosan and less than 10% of trimethoprim were removed by Nannochloris sp., green algae. Moreover, variable concentrations of PPCPs might adversely affect the growth and production of algae. The exposure of algae to high concentrations of PPCPs can reduce the content of chlorophyll and protein due to producing reactive oxygen species (ROS), and affecting expression of some genes in chlorophyll (rbcL, psbA, psaB and psbc).

Arthrospira sp. mediated bioremediation of gray water in ceramic membrane based photobioreactor: process optimization by response surface methodology

Direct discharge of raw domestic sewage enriched with nitrogenous and phosphorous compounds into the water bodies causes eutrophication and other environmental hazards with detrimental impacts on public and ecosystem health. The present study focuses on phycoremediation of gray water with Arthrospira sp. using an innovative hydrophobic ceramic membrane-based photobioreactor system integrated with CO₂ biofixation and biodiesel production, aiming for green technology development. Surfactant and oil-rich gray water collected from the domestic kitchen was used wherein, chloride, sulfate, and surfactant concentrations were statistically optimized using response surface methodology (RSM), considering maximum microalgal growth rate as a response for the design. Ideal concentrations (mg/L) of working parameters were found to be 7.91 (sulfate), 880.49 (chloride), and 144.02 (surfactant), respectively to achieve optimum growth rate of 0.43 g_dwt/L/day. Enhancement of growth rate of targeted microalgae by 150% with suitable CO₂ (19.5%) supply and illumination in the photobioreactor affirms its efficient operation. Additionally, harvested microalgal biomass obtained from the process showed a biodiesel content of around 5.33% (dry weight). The microalgal treatment enabled about 96.82, 87.5, and 99.8% reductions in BOD, COD, and TOC, respectively, indicating the potential of the process in pollutant assimilation and recycling of such wastewater along with value-added product generation.

Resource recovery through bioremediation of wastewaters and waste carbon by microalgae: a circular bioeconomy approach

Microalgal biomass-based biofuels are a promising alternative to fossil fuels. Microalgal biofuels' major obstacles are the water and carbon sources for their cultivation and biomass harvest from the liquid medium. To date, an economically viable process is not available for algal based biofuels. The circular bioeconomy is an attractive concept for reuse, reduce, and recycle resources. The recovery of nutrients from waste and effluents by microalgae could significantly impact the escalating demands of energy and nutraceutical source to the growing population. Wastewaters from different sources are enriched with nutrients and carbon, and these resources can be recovered and utilized for the circular bioeconomy approach. However, the utilization of wastewaters and waste seems to be an essential strategy for mass cultivation of microalgae to minimizing freshwater consumption, carbon, nutrients cost, nitrogen, phosphorus removal, and other pollutants loads from wastewater and generating sustainable biomass for value addition for either biofuels or other chemicals. Hence, the amalgamation of wastewater treatment with the mass cultivation of microalgae improved the conventional treatment process and environmental impacts. This review provides complete information on the latest progress and developments of microalgae as potential biocatalyst for the remediation of wastewaters and waste carbon to recover resources through biomass with metabolites for various industrial applications and large-scale cultivation in wastewaters, and future perspectives are discussed.

Investigation into the Novel Microalgae Membrane Bioreactor with Internal Circulating Fluidized Bed for Marine Aquaculture Wastewater Treatment

A microalgae membrane bioreactor (MMBR) with internal circulating fluidized bed (ICFB) was constructed at room temperature to study the removal efficiency of marine aquaculture wastewater pollutants and continuously monitor the biomass of microalgae. Within 40 days of operation, the removal efficiency of NO₃⁻–N and NH₄⁺–N in the ICFB-MMBR reached 52% and 85%, respectively, and the removal amount of total nitrogen (TN) reached 16.2 mg/(L·d). In addition, the reactor demonstrated a strong phosphorus removal capacity. The removal efficiency of PO₄³⁻–P reached 80%. With the strengthening of internal circulation, the microalgae could be distributed evenly and enriched quickly. The maximum growth rate and biomass concentration reached 60 mg/(L·d) and 1.4 g/L, respectively. The harvesting of microalgae did not significantly affect the nitrogen and phosphorus removal efficiency of ICFB-MMBR. The membrane fouling of the reactor was investigated by monitoring transmembrane pressure difference (TMP). Overall, the membrane fouling cycle of ICFB-MMBR system was more than 40 days.

Integrating gravity settler with an algal membrane photobioreactor for in situ biomass concentration and harvesting

Gravity settler was integrated into an algal membrane photobioreactor (MPBR) for in situ biomass concentration and harvesting of Graesiella emersonii. By continuous circulation of suspended biomass between MPBR and settler, biomass was sedimented in the settler and harvested. MPBR-Settler operations at different recirculation rates (0.15-2.4 L/d) and settler volumes (250-1000 mL) affected both suspended (0.4-3.4 g/L) and settled (16.1-31.1 g/L) biomass concentrations. Maximum biomass productivity of 0.26 ± 0.06 g/L/d was achieved in the 1000 mL settler operating at 0.6 L/d recirculation rate, which also yielded 9-131 times concentrated biomass (31.1 g/L) compared to the baseline MPBR (0.2-3.4 g/L). This novel design also facilitated MPBR operation at low solids retention times (6-8 d) without incurring large outflow of unfiltered effluent, while alleviating light limitation via biomass dilution. These results demonstrated that the MPBR-Settler system can provide an excellent way to mitigate light limitation, enhance biomass productivity, and simplify biomass harvesting.

Forward Osmosis as Concentration Process: Review of Opportunities and Challenges

In the past few years, osmotic membrane systems, such as forward osmosis (FO), have gained popularity as "soft" concentration processes. FO has unique properties by combining high rejection rate and low fouling propensity and can be operated without significant pressure or temperature gradient, and therefore can be considered as a potential candidate for a broad range of concentration applications where current technologies still suffer from critical limitations. This review extensively compiles and critically assesses recent considerations of FO as a concentration process for applications, including food and beverages, organics value added compounds, water reuse and nutrients recovery, treatment of waste streams and brine management. Specific requirements for the concentration process regarding the evaluation of concentration factor, modules and design and process operation, draw selection and fouling aspects are also described. Encouraging potential is demonstrated to concentrate streams more than 20-fold with high rejection rate of most compounds and preservation of added value products. For applications dealing with highly concentrated or complex streams, FO still features lower propensity to fouling compared to other membranes technologies along with good versatility and robustness. However, further assessments on lab and pilot scales are expected to better define the achievable concentration factor, rejection and effective concentration of valuable compounds and to clearly demonstrate process limitations (such as fouling or clogging) when reaching high concentration rate. Another important consideration is the draw solution selection and its recovery that should be in line with application needs (i.e., food compatible draw for food and beverage applications, high osmotic pressure for brine management, etc.) and be economically competitive.

Mitigating nutrient accumulation with microalgal growth towards enhanced nutrient removal and biomass production in an osmotic photobioreactor

Forward osmosis (FO) has great potential for low energy consumption wastewater reuse provided there is no requirement for draw solutes (DS) regeneration. Reverse solute flux (RSF) can lead to DS build-up in the feed solution. This remains a key challenge because it can cause significant water flux reduction and lead to additional water quality problems. Herein, an osmotic photobioreactor (OsPBR) system was developed to employ fast-growing microalgae to consume the RSF nutrients. Diammonium phosphate (DAP) was used as a fertilizer DS, and algal biomass was a byproduct. The addition of microalgae into the OsPBR proved to maintain water flux while reducing the concentrations of NH₄⁺-N, PO₄^3--P and chemical oxygen demand (COD) in the OsPBR feed solution by 44.4%, 85.6%, and 77.5%, respectively. Due to the forward cation flux and precipitation, intermittent supplements of K⁺, Mg²⁺, Ca²⁺, and SO₄^2- salts further stimulated algal growth and culture densities by 58.7%. With an optimal hydraulic retention time (HRT) of 3.33 d, the OsPBR overcame NH₄⁺-N overloading and stabilized key nutrients NH₄⁺-N at ∼ 2.0 mg L^-1, PO₄^3--P < 0.6 mg L^-1, and COD < 30 mg L^-1. A moderate nitrogen reduction stress resulted in a high carbohydrate content (51.3 ± 0.1%) among microalgal cells. A solids retention time (SRT) of 17.82 d was found to increase high-density microalgae by 3-fold with a high yield of both lipids (9.07 g m^-3 d^-1) and carbohydrates (16.66 g m^-3 d^-1). This study encourages further exploration of the OsPBR technology for simultaneous recovery of high-quality water and production of algal biomass for value-added products.

Potable-quality water recovery from primary effluent through a coupled algal-osmosis membrane system

A coupled algal-osmosis membrane treatment system was studied for recovering potable-quality water from municipal primary effluent. The core components of the system included a mixotrophic algal process for removal of biochemical oxygen demand (BOD) and nutrients, followed by a hybrid forward osmosis (FO)-reverse osmosis (RO) system for separation of biomass from the algal effluent and production of potable-quality water. Field experiments demonstrated consistent performance of the algal system to meet surface discharge standards for BOD and nutrients within a fed-batch processing time of 2-3 days. The hybrid FO-RO system reached water productivity of 1.57 L/m²-h in FO using seawater as draw solution; and permeate flux of 3.50 L/m²-h in brackish water RO (BWRO) and 2.07 L/m²-h in seawater RO (SWRO) at 2068 KPa. The coupled algal-membrane system achieved complete removal of ammonia, fluoride, and phosphate; over 90% removal of calcium, sulfate, and organic carbon; and 86-89% removal of potassium and magnesium. Broadband characterization using high resolution mass spectrometry revealed extensive removal of organic compounds, particularly wastewater surfactants upon algal treatment. This study demonstrated long-term performance of the FO system at water recovery of 90% and with membrane cleaning by NaOH solution.

Kinetic study of nutrients removal from municipal wastewater by Chlorella vulgaris in photobioreactor supplied with CO2-enriched air

The microalgae Chlorella vulgaris ATCC 13482 was used in the present study for municipal wastewater treatment. Batch experiments were performed in bubble column photobioreactors of 7 L working volume maintained at 25 ± 2°C and 14 h/10 h of photo and dark cycle. The treatment process was enhanced by using CO₂-augmented air (5% CO₂ v/v) supply into the microalgal culture in comparison to the use of normal air (0.03% CO₂ v/v). For a period of 7 days, C. vulgaris effected maximum removals of 74.4% soluble fraction of chemical oxygen demand, 72% ammonia (NH₄-N), 60% nitrate (NO₃-N) and 81.93% orthophosphate (PO₄-P) with use of normal air, whereas 84.6% sCOD, 88% NH₄-N, 72% NO₃-N and 92.8% PO₄-P removals, respectively, with use of 5% CO₂/air supply. Using kinetic study data, the specific rates of ammonia and phosphate uptake (q_ammonia and q_phosphate) by C. vulgaris at 5% CO₂/air supply were found to be 2.41 and 0.85 d^-1, respectively. Using the algal remediation technology, nitrogen-phosphorus-potassium recovery from sewage treatment plant of 37.5 million litres per day wastewater influent capacity was calculated to be ∼298.5, 55.4 and 83.7 kg d^-1, respectively.

Microalgae harvesting from wastewater by pH modulation and flotation: Assessing and optimizing operational parameters

Microalgae harvesting is one of the major bottlenecks for the production of high-value microalgal products on a large scale, which encourages investigations of harvesting methods with better cost-benefits. Among these harvesting techniques, flotation stands out as a promising method, however it is still minimally explored when compared to the sedimentation method. In this study, the pH modulation followed by dissolved air flotation (DAF) was tested as a harvesting method for Chlorella sorokiniana cultivated in wastewater. The main aims of this study were to optimize the operational parameters of coagulation (pH, velocity gradient, and mixing time) and flotation (recirculation rate), check their reproducibility and resilience with the variability of wastewater characteristics, and evaluate the final wastewater quality after treatment using an optimized harvesting method. Parameter optimization was carried out using the one-factor-at-a-time method. The optimal parameters were a velocity gradient of 500 s^-1, mixing time of 30 s, pH 12, and 20% of recirculation rate. High efficiencies were obtained for C. sorokiniana removal (96.5-97.9%), making it a successful process. Moreover, the photobioreactor effluent quality was also improved significantly after microalgae harvesting, with high nutrient removal (88.6-95.1% of total Kjeldahl nitrogen and 91.8-98.3% of total phosphorus) and organic matter removal (80.5-86.8% of chemical oxygen demand). The results showed the pH modulation and DAF as an effective process for wastewater treatment and biomass harvesting. This study also indicated the importance of operational optimization, not studied until now, in which the achieved results could be potentially applied as practical guidelines for microalgae harvesting on a large scale.

Nutrient removal in an algal membrane photobioreactor: effects of wastewater composition and light/dark cycle

Graesiella emersonii was cultivated in an osmotic membrane photobioreactor (OMPBR) for nutrients removal from synthetic wastewater in continuous mode. At 1.5 days of hydraulic retention time and under continuous illumination, the microalgae removed nitrogen (N) completely at influent NH₄⁺-N concentrations of 4-16 mg/L, with removal rates of 3.03-12.1 mg/L-day. Phosphorus (P) removal in the OMPBR was through biological assimilation as well as membrane rejection, but PO₄^3--P assimilation by microalgae could be improved at higher NH₄⁺-N concentrations. Microalgae biomass composition was affected by N/P ratio in wastewater, and a higher N/P ratio resulted in higher P accumulation in the biomass. The OMPBR accumulated about 0.35 g/L biomass after 12 days of operation under continuous illumination. However, OMPBR operation under 12 h light/12 h dark cycle lowered biomass productivity by 60%, which resulted in 20% decrease in NH₄⁺-N removal and nearly threefold increase in PO₄^3--P accumulation in the OMPBR. Prolonged dark phase also affected carbohydrate accumulation in biomass, although its effects on lipid and protein accumulation were negligible. The microalgae also exhibited high tendency to aggregate and settle, which could be attributed to reduction in cell surface charge and enrichment of soluble algal products in the OMPBR. Due to a relatively shorter operating period, membrane biofouling and salt accumulation did not influence the permeate flux significantly. These results improve the understanding of the effects of N/P ratio and light/dark cycle on biomass accumulation and nutrients removal in the OMPBR.

A critical review on designs and applications of microalgae-based photobioreactors for pollutants treatment

The development of the photobioreactors (PBs) is recently noticeable as cutting-edge technology while the correlation of PBs' engineered elements such as modellings, configurations, biomass yields, operating conditions and pollutants removal efficiency still remains complex and unclear. A systematic understanding of PBs is therefore essential. This critical review study is to: (1) describe the modelling approaches and differentiate the outcomes; (2) review and update the novel technical issues of PBs' types; (3) study microalgae growth and control determined by PBs types with comparison made; (4) progress and compare the efficiencies of contaminants removal given by PBs' types and (5) identify the future perspectives of PBs. It is found that Monod model's shortcoming in internal substrate utilization is well fixed by modified Droop model. The corroborated data also remarks an array of PBs' types consisting of flat plate, column, tubular, soft-frame and hybrid configuration in which soft-frame and hybrid are the latest versions with higher flexibility, performance and smaller foot-print. Flat plate PBs is observed with biomass yield being 5 to 20 times higher than other PBs types while soft-frame and membrane PBs can also remove pharmaceutical and personal care products (PPCPs) up to 100%. Looking at an opportunity for PBs in sustainable development, the flat plate PBs are applicable in PB-based architectures and infrastructures indicating an encouraging revenue-raising potential.

CO₂ Bubbling to Improve Algal Growth, Nutrient Removal, and Membrane Performance in an Algal Membrane Bioreactor

  Algae generally prefer CO2 through passive gas diffusion to HCO-3 or CO2-3, as uptake of carbonate species relies on active transport. In this study, the effects of CO2 bubbling on algal growth, nutrient uptake, lipid accumulation, and membrane fouling control were investigated in an algal membrane bioreactor (A-MBR). Bubbling with 10% CO2 in the A-MBR system increased algal specific oxygen production rate by 43 ± 5% and algal productivity by 39 ± 1%, even though there was abundant dissolved inorganic carbon available in the secondary wastewater effluent (about 3.6 mM). Meanwhile, nitrogen removal capacity increased from originally 2.6 ± 0.4 g/m3•d to 3.6 ± 0.4 g/m3•d through continuous CO2 bubbling. Furthermore, membrane fouling was significantly reduced in the A-MBR system with CO2 addition, likely because of reduced mineral precipitation on the membrane at lower pHs.

Assessment of membrane photobioreactor (MPBR) performance parameters and operating conditions

Membrane photobioreactor (MPBR) technology is an emerging algae-based wastewater treatment system. Given the limitations due to the general use of conventional analytical approaches in previous research, this study aims to provide a more comprehensive assessment of MPBR performance through advanced characterisation techniques. New performance parameters are also proposed, encompassing five important aspects of MPBR system efficiency (i.e. biomass concentration, composition, production, nutrient uptake and harvesting potential). Under initial standard operating conditions, performance parameters, such as cell count/MLSS ratio, cell viability, proportion of bacteria and biomass yield coefficient, were found to offer new insights into the operation of MPBR. These parameters were then used, for the first time, to systematically investigate MPBRs operated under different hydraulic retention times (HRTs) and solids retention times (SRTs). Applying shorter HRT and SRT was observed to increase cell viability and productivity (up to 0.25 × 10⁷ cells/mL·d), as anticipated due to the higher nutrient loading. It was noted that the faster growing algal cells featured lower requirement for nutrients. On the other hand, extending HRT and SRT resulted in a more heterogeneous culture (lower cell count/MLSS ratio and higher proportion of bacteria), achieving a higher degree of autoflocculation and greater NO₃-N and PO₄-P removals of up to 79% and 78% respectively. The results demonstrate the trade-off between applying different HRTs and SRTs and the importance of fully characterising system performance to critically assess the advantages and limitations of chosen operating conditions.