Hydrothermal pretreatment and enzymatic hydrolysis of mixed green and woody lignocellulosics from arid regions

Organic waste and beechwood cellulose blend saccharification and validation of hydrolysates by fermentation

This study demonstrates the sustainable advancement of fermentation media by blending the organic fraction of municipal solid waste (OFMSW) with organosolv beechwood cellulose. Investigations examined the effects of enzyme dosages and OFMSW integration into organosolv beechwood cellulose on sugar yield. The findings indicate that OFMSW inclusion and Cellic® CTec3 dosage significantly influence hydrolysis across two different batches of beechwood cellulose. Experimental data showed that OFMSW inclusion levels of 35% and 45% (w/w) produced sugar levels comparable to pure beechwood cellulose, achieving 58% to 68% (w/w) saccharification with sugar concentrations of 44 to 46 g/L. This highlights OFMSW's potential as a buffer substitute during the enzymatic conversion of organosolv cellulose. The resulting sugar-rich hydrolysates, derived from OFMSW-cellulose blends and pure cellulose, were evaluated for ethanol and cell biomass production using Saccharomyces cerevisiae and Mucor indicus, yielding 30 g of ethanol/L hydrolysate. Furthermore, OFMSW inclusion in beechwood cellulose proved to be an excellent alternative to synthetic nitrogen agents for S. cerevisiae cell production, reaching 12.2 g of biomass/L and surpassing the biomass concentration from cultivation on cellulose hydrolysate with nitrogen supplementation by threefold. However, M. indicus did not grow in the OFMSW-cellulose blend, suggesting that the inhibitory compounds of OFMSW may be a bottleneck in the proposed process. The present study demonstrates the benefits of incorporating OFMSW into cellulose material, as it enhances both cost-effectiveness and sustainability. This is attributed to the natural buffering properties and nitrogen content of OFMSW, which reduces the need for synthetic agents in fermentation-based lignocellulose biorefineries. KEY POINTS: • OFMSW inclusion significantly influences beechwood cellulose saccharification. • OFMSW could be an excellent alternative for synthetic agents in biorefinery. • S. cerevisiae achieved higher biomass growth on OFMSW/cellulose mix compared to YPD.

A Novel Kinetic Modeling of Enzymatic Hydrolysis of Sugarcane Bagasse Pretreated by Hydrothermal and Organosolv Processes

Lignocellulosic biomasses have a complex and compact structure, requiring physical and/or chemical pretreatments to produce glucose before hydrolysis. Mathematical modeling of enzymatic hydrolysis highlights the interactions between cellulases and cellulose, evaluating the factors contributing to reactor scale-up and conversion rates. Furthermore, this study evaluated the influence of two pretreatments (hydrothermal and organosolv) on the kinetics of enzymatic hydrolysis of sugarcane bagasse. The kinetic parameters of the model were estimated using the Pikaia genetic algorithm with data from the experimental profiles of cellulose, cellobiose, glucose, and xylose. The model considered the phenomenon of non-productive adsorption of cellulase on lignin and inhibition of cellulase by xylose. Moreover, it included the behavior of cellulase adsorption on the substrate throughout hydrolysis and kinetic equations for obtaining xylose from xylanase-catalyzed hydrolysis of xylan. The model for both pretreatments was experimentally validated with bagasse concentration at 10% w/v. The Plackett-Burman design identified 17 kinetic parameters as significant in the behavior of process variables. In this way, the modeling and parameter estimation methodology obtained a good fit from the experimental data and a more comprehensive model.

Utilization of the UAE date palm leaf biochar in carbon dioxide capture and sequestration processes

This paper evaluates the potential use of date palm leaf biochar as a climate change solution through CO₂ capture and sequestration. The pyrolysis of date palm leaf was performed at different temperatures 300°, 400°, 500°, and 600 °C. The physicochemical characteristics of the synthesized biochar were examined using Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray Analysis (EDX), Fourier transforms infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). Direct gas-solid interaction was carried out in an integrated Fluidized Bed Reactor (FBR), connected with a gas analyzer for maximum and effective mixing between the biochar and CO₂. LabView program was used as data acquisition for an instantaneous calculation of CO₂ adsorption. This study showed that the date palm biochar as porous carbon-based materials has high CO₂ adsorption capacity through physisorption and chemisorption progressions. The adsorption results showed a maximum CO₂ capture percentage of 0.09 kg CO₂/kg, 0.15 kg CO₂/kg, 0.20 kg CO₂/kg, and 0.25 kg CO₂/kg palm biochar synthesized at 300 °C, 400 °C, 500 °C, and 600 °C, respectively. This paper paid attention to the inexpensive technology applied in CO₂ sequestration, where fluidization provides well mixing of biochar particles with low operation cost.

Effective methane production from the Japanese weed Gyougi-shiba (Cynodon dactylon) is accomplished by colocalization of microbial communities that assimilate water-soluble and -insoluble fractions

Weed, an abundant biomass, is considered unsuitable as a raw material for methane production. There are few reports on the anaerobic digestion of weeds without the addition of other organic wastes. To solve this problem, a methane-producing microbial community with weed as a sole feedstock was established. This study mainly focused on the degree of contribution between water-soluble and -insoluble fractions of the weed to methane production; thus, methane production from both fractions was tested separately. Methane production after 80-day batch cultures with whole weed, water-soluble and water-insoluble fractions was 184.5, 96.8 and 26.5 NmL g-1 dry matter (DM), respectively. The results of 16S rRNA gene amplicon sequence analysis revealed that Proteiniphilum saccharofermentans and several Methanobacterium species commonly dominated all cultures, whereas the population dynamics of minor species differed in every culture. Moreover, the remixed culture of microbial communities adapted to water-soluble and -insoluble fractions recovered methane production (252.4 NmL g-1 DM). Based on these results, it can be strongly inferred that colocalizing the minor species in water-soluble and -insoluble fractions is important for effective methane production.

The Effect of Thermomechanical Pretreatment on the Structure and Properties of Lignin-Rich Plant Biomass

The cooperative thermomechanical properties of plant-derived polymers have been studied insufficiently, although this feedstock has a very high potential. In the present paper, we analyzed the changes in the structure and physicochemical properties of lignin-rich biomass induced by thermomechanical pretreatment. Low-temperature treatment allows one to retain the original supramolecular structure of the cell walls, while an appreciably high disintegration degree is reached. This increases the reactivity of the material in the subsequent heterogeneous reactions. Mechanical pretreatment at medium temperatures (10 °C), when almost all cell wall polymers except for low-molecular-weight lignin are in the glassy state, enhances the mobility of cell wall polymers and causes sufficient cellulose disordering, while the specific surface area is not significantly increased. High-temperature pretreatment of reed biomass is accompanied by pore formation and lignin release from the cell wall structure, which opens up new prospects for using this biomass as a matrix to produce core–shell-structured sorbents of heavy metals. The energy consumed by mechanochemical equipment for the activation of reed biomass was determined.

Pyrolysis of date palm waste to biochar using concentrated solar thermal energy: Economic and sustainability implications

A system of concentrated solar energy for pyrolysis of date palm waste to biochar is designed and simulated using SuperPro Designer v8.5. Both economic and environmental sustainability implications are evaluated by bench-marking with the conventional process (electric heating-based pyrolysis). Economic analysis shows that this process is more economically viable than the conventional process, with payback time (PBT) of 4 years and 132 days, internal rate of return (IRR) of 14.8%, return on investment (ROI) of 22.9% and gross margin of 35.5%. Environmental impact assessment shows that CO₂ emissions from concentrated solar energy-based pyrolysis accounts for only 38% of that of the conventional pyrolysis, indicating that concentrated solar energy pyrolysis is more environmentally friendly. Sensitivity analysis shows that PBT is more sensitive to changes in biochar selling price than changes in the cost of acquiring date palm waste. This process presents sustainable opportunities for biochar production while reducing life cycle emissions and costs.

Zirconium based metal-organic framework in-situ assisted hydrothermal pretreatment and enzymatic hydrolysis of Platanus X acerifolia exfoliating bark for bioethanol production

Metal-organic framework (MOF) assisted hydrothermal pretreatment and co-catalysis strategy based on UiO-66 MOF is developed for the first time. The Planetree exfoliating bark was pretreated with or without UiO-66 assisted hydrothermal method at a temperature ranging from 160 to 240 °C for 1-3 h residence. With the rise of pretreatment severity, the total reducing sugar (TRS) was increased till reached maximum, 180 mg g^-1, in the presence of UiO-66. The fitting models validate the optimal hydrothermal condition was at 180 °C and 1 h, which was characterized with high TRS and very low yield of furfural and HMF. The TRS from enzymatic hydrolysis reaches maximum, 391 mg g^-1, in the presence of MOF co-catalysis and the maximum ethanol yield achieved was 73%. Altered morphology, higher surface area and porosity are noticed after MOF assisted hydrothermal pretreatment. This study insights the MOFs' application in lignocellulose biomass processing.

Enhanced bioreduction synthesis of ethyl (R)-4-chloro-3-hydroybutanoate by alkalic salt pretreatment

In this study, biomass-hydrolysate was used for enhancing the bioreduction of ethyl 4-chloro-3-oxobutanoate (COBE). Firstly, dilute alkalic salt pretreatment was attempted to pretreat bamboo shoot shell (BSS). It was found that enzymatic in situ hydrolysis of 20-50 g/L BSS pretreated with dilute alkalic salts (0.4% Na₂CO₃, 0.032% Na₂S) at 7.5% sulfidity by autoclaving at 110 °C for 40 min gave sugar yields at 59.9%-73.5%. Moreover, linear relationships were corrected on solid recovery-total delignification-sugar yield. In BSS-hydrolysates, xylose and glucose could promote the reductase activity of recombinant E. coli CCZU-A13. Compared with glucose, hydrolysate could increase the reductase activity by 1.35-folds. Furthermore, the cyclohexane-hydrolysate (10:90, v/v) biphasic media containing ethylene diamine tetraacetic acid (EDTA, 40 mM) and l-glutamine (150 mM) was built for the effective biosynthesis of ethyl (R)-4-chloro-3-hydroxybutanoate [(R)-CHBE] (94.6% yield) from 500 mM COBE. In conclusion, this strategy has high potential for the effective biosynthesis of (R)-CHBE (>99% e.e.).

Degradative solvent extraction of biomass using petroleum based solvents

The aim of this study was to examine the possibility to use two petroleum based solvents, kerosene and a distillate rich in benzene (A150), as practical solvents for the degradative solvent extraction at 350 °C in reference to 1-MN. It was found that the thermal degradation behavior of two biomass samples, a rice straw and Leucaena, in the three solvents was rather similar and that only the distribution of Soluble, Deposit, and Residue was affected by the difference of solubility of the solvents. Preparation of solvent treated biomass (STB) using the three solvents gave the yields close to the sum of the yields of Soluble, Deposit, and Residue. It was judged that A150 may be used to preparing Soluble and that Kerosene can well be used to prepare STB.

Process simulation and economic assessment of hydrothermal pretreatment and enzymatic hydrolysis of multi-feedstock lignocellulose - Separate vs combined processing

Biorefinery based on multi-feedstock lignocellulose can be viable where a sustainable supply of a single substrate is limited, for example in arid regions. Processing of mixed feedstocks has been studied in lab scale, however, its economics are less studied. In this study, an economic comparison was made between separate and combined (mixed) processing approaches for multi-feedstock lignocellulose for the production of monomeric sugars. This modular approach of focusing on sugar platform makes the results applicable for many applications using the sugars as feedstock. Feedstock considered in this study were the green and woody lignocellulose residues: Bermuda grass, Jasmine hedges, and date palm fronds. Results showed that, at an identical total feed rate, combined processing was more advantageous as compared to separate processing. A further sensitivity analysis on mixed combined processing showed that the cellulase enzyme price and feed price are the two major factors affecting the production cost.