Biological synthesis of 2,5-bis(hydroxymethyl)furan from biomass-derived 5-hydroxymethylfurfural by E. coli CCZU-K14 whole cells

Co-production of 2,5-dihydroxymethylfuran and furfuralcohol from sugarcane bagasse via chemobiocatalytic approach in a sustainable system

2,5-Dihydroxymethylfuran and furfuryl alcohol serve as versatile building-blocks in pharmaceuticals, polymers, and value-added intermediates. To develop an efficient and sustainable method for their production from biomass, a combined approach using deep eutectic solvent Citric acid:Betaine (CTA:BT) for bagasse catalysis and recombinant E. coli SCFD23 for bioreduction of bagasse-derived 5-hydroxymethylfurfural and furfural was devised. Bagasse was effectively transformed into 5-hydroxymethylfurfural (48 mM) and furfural (14 mM) in CTA:BT (8 wt%)-water at 170 °C for 30 min. Bioreduction of 5-hydroxymethylfurfural and furfural by SCFD23 cell co-expressing formate dehydrogenase and NAD(P)H-dependent aldehyde reductase (SsCR) yielded 2,5-dihydroxymethylfuran (90.0 % yield) and furfuryl alcohol (99.0 % yield) in 6 h, using biomass-derived formic acid, xylose and glucose as co-substrates. Molecular docking confirmed the stable binding and reductase activity of SsCR with the biomass-derived 5-hydroxymethylfurfural and furfural. An efficient and eco-friendly chemobiological approach was applied for co-production of 2,5-dihydroxymethylfuran and furfuryl alcohol from biomass in one-pot two-step reaction.

Transformation of bread waste into 2,5-furandimethanol via an efficient chemoenzymatic approach in a benign reaction system

Via combination catalysis with deep eutectic solvent lactic acid:betaine (chemocatalyst) and HMFOMUT cell (biocatalyst: E. coli HMFOMUT whole-cell), one-pot manufacture of 2,5-furandimethanol from waste bioresource was constructed in a chemoenzymatic approach. With bread waste (50 g/L) as substrate, the 5-hydroxymethylfuran yield reached 44.2 Cmol% (based on bread waste) by lactic acid:betaine (15 wt%) at 180 °C for 15 min. With glucose as co-substrate, HMFOMUT could transform 5-hydroxymethylfurfural (150 mM) to 2,5-furandimethanol (84.5 % yield) after 1 day at 37 °C and pH 7.0. In lactic acid:betaine-H₂O, HMFOMUT effectively converted bread-derived 5-hydroxymethylfurfural into 2,5-furandimethanol in a productivity of 700 kg 2,5-furandimethanol per kg 5-hydroxymethylfurfural (230 kg 2,5-furandimethanol per kg bread). In an eco-friendly lactic acid:betaine system, an effective one-pot chemoenzymatic strategy was firstly developed to convert bread waste into 2,5-furandimethanol, which would reduce the operation cost and has potential application value for valorizing waste food bioresource into value-added furan.

Significant Enhancement of 5-Hydroxymethylfural Productivity from D-Fructose with SG(SiO2) in Betaine:Glycerol–Water for Efficient Synthesis of Biobased 5-(Hydroxymethyl)furfurylamine

5-Hydroxymethyl-2-furfurylamine (5-HMFA) as an important 5-HMF derivative has been widely utilized in the manufacture of diuretics, antihypertensive drugs, preservatives and curing agents. In this work, an efficient chemoenzymatic route was constructed for producing 5-(hydroxymethyl)furfurylamine (5-HMFA) from biobased D-fructose in deep eutectic solvent Betaine:Glycerol–water. The introduction of Betaine:Glycerol could greatly promote the dehydration of D-fructose to 5-HMF and inhibit the secondary decomposition reactions of 5-HMF, compared with a single aqueous phase. D-Fructose (200 mM) could be catalyzed to 5-HMF (183.4 mM) at 91.7% yield by SG(SiO2) (3 wt%) after 90 min in Betaine:Glycerol (20 wt%), and at 150 °C. E. coli AT exhibited excellent bio-transamination activity to aminate 5-HMF into 5-HMFA at 35 °C and pH 7.5. After 24 h, D-fructose-derived 5-HMF (165.4 mM) was converted to 5-HMFA (155.7 mM) in 94.1% yield with D-Ala (D-Ala-to-5-HMF molar ratio 15:1) in Betaine:Glycerol (20 wt%) without removal of SG(SiO2), achieving a productivity of 0.61 g 5-HMFA/(g substrate D-fructose). Chemoenzymatic valorization of D-fructose with SG(SiO2) and E. coli AT was established for sustainable production of 5-HMFA, which has potential application.

Rendered-Protein Hydrolysates as a Low-Cost Nitrogen Source for the Fungal Biotransformation of 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is a platform chemical that can be converted into a wide range of high-value derivatives. Industrially, HMF-based derivatives are synthesized via chemical catalysis. However, biocatalytic transformation has emerged as an attractive alternative. Significant advances have been made in the last years using isolated enzymes and whole-cell biocatalysts in HMF biotransformation. Nonetheless, one of the major bottlenecks is the cost of the process, mainly due to the microorganism growth substrate. In this work, biotransformation studies to transform HMF into 2,5-di(hydroxymethyl)furan (DHMF) were carried out with the fungus Fusarium striatum using low-cost protein hydrolysates. The protein hydrolysates were obtained from fines, an unexploited material produced during the rendering process of meat industry waste residues. Given the high content in the protein of fines, of around 46%, protein hydrolysis was optimized using two commercially available proteases, Alcalase 2.4 L and Neutrase 0.8 L. The maximum degree of hydrolysis (DH) achieved with Alcalase 2.4 L was 21.4% under optimal conditions of 5% E/S ratio, pH 8, 55 °C, and 24 h. On the other hand, Neutrase 0.8 L exhibited lower efficiency, and therefore, lower protein recovery. After optimization of the Neutrase 0.8 L process using the response surface methodology (RSM), the maximum DH achieved was 7.2% with the variables set at 15% E/S ratio, initial pH 8, 40 °C, and 10.5 h. Using these hydrolysates as a nitrogen source allowed higher sporulation of the fungus and, therefore, the use of a lower volume of inoculum (three-fold), obtaining a DHMF yield > 90%, 50% higher than the yield obtained when using commercial peptones. The presented process allows the transformation of animal co- and by-products into low-cost nitrogen sources, which greatly impacts the industrial feasibility of HMF biotransformation.

Catalytic valorization of biomass for furfuryl alcohol by novel deep eutectic solvent-silica chemocatalyst and newly constructed reductase biocatalyst

Chemoenzymatic cascade catalysis using deep eutectic solvent-silica heterogeneous catalyst and reductase biocatalyst was constructed for synthesizing furfuryl alcohol from biomass in one-pot manner. A novel heterogeneous catalyst B:LA-SG(SiO₂) was firstly prepared by immobilizing deep eutectic solvent Betaine:Lactic acid on silica with sol-gel method using tetraethyl orthosilicate as silicon source. High furfural yield (45.3%) was achieved from corncob with B:LA-SG(SiO₂) catalyst (2.5 wt%) in water at 170 ˚C for 0.5 h. Possible catalytic mechanism for converting biomass into furfural was proposed. Moreover, one newly constructed recombinant E. coli KF2021 cells containing formate dehydrogenase and reductase was utilized to transform corncob-valorized furfural into furfuralcohol at 97.7% yield at pH 7.5 and 40 ˚C via HCOONa-driven coenzyme regeneration. Such a hybrid process was constructed for tandem chemocatalysis and biocatalysis in a same reactor, potentially reducing the operation cost, which had potential application for valorization of biomass to value-added furans.

Whole Cell Biocatalysis of 5-Hydroxymethylfurfural for Sustainable Biorefineries

The implementation of cost-effective and sustainable biorefineries to substitute the petroleum-based economy is dependent on coupling the production of bioenergy with high-value chemicals. For this purpose, the US Department of Energy identified a group of key target compounds to be produced from renewable biomass. Among them, 5-hydroxymethylfurfural (HMF) can be obtained by dehydration of the hexoses present in biomass and is an extremely versatile molecule that can be further converted into a wide range of higher value compounds. HMF derivatives include 2,5-bis(hydroxymethyl)furan (BHMF), 5-hydroxymethyl-furan-2-carboxylic acid (HMFCA), 2,5-diformylfuran (DFF), 5-formyl-2-furancarboxylic acid (FFCA) and 2,5-furandicarboxylic acid (FDCA), all presenting valuable applications, in polymers, bioplastics and pharmaceuticals. Biocatalysis conversion of HMF into its derivatives emerges as a green alternative, taking into account the high selectivity of enzymes and the mild reaction conditions used. Considering these factors, this work reviews the use of microorganisms as whole-cell biocatalysts for the production of HMF derivatives. In the last years, a large number of whole-cell biocatalysts have been discovered and developed for HMF conversion into BHMF, FDCA and HMFCA, however there are no reports on microbial production of DFF and FFCA. While the production of BHMF and HMFCA mainly relies on wild type microorganisms, FDCA production, which requires multiple bioconversion steps from HMF, is strongly dependent on genetic engineering strategies. Together, the information gathered supports the possibility for the development of cell factories to produce high-value compounds, envisioning economical viable biorefineries.

Chemoenzymatic Conversion of Biomass-Derived D-Xylose to Furfuryl Alcohol with Corn Stalk-Based Solid Acid Catalyst and Reductase Biocatalyst in a Deep Eutectic Solvent–Water System

In this work, the feasibility of chemoenzymatically transforming biomass-derived D-xylose to furfuryl alcohol was demonstrated in a tandem reaction with SO42−/SnO2-CS chemocatalyst and reductase biocatalyst in the deep eutectic solvent (DES)–water media. The high furfural yield (44.6%) was obtained by catalyzing biomass-derived D-xylose (75.0 g/L) in 20 min at 185 °C with SO42−/SnO2-CS (1.2 wt%) in DES ChCl:EG–water (5:95, v/v). Subsequently, recombinant E.coli CF cells harboring reductases transformed D-xylose-derived furfural (200.0 mM) to furfuryl alcohol in the yield of 35.7% (based on D-xylose) at 35 °C and pH 7.5 using HCOONa as cosubstrate in ChCl:EG–water. This chemoenzymatic cascade catalysis strategy could be employed for the sustainable production of value-added furan-based chemical from renewable bioresource.

Efficient chemoenzymatic valorization of biobased D-fructose into 2,5-bis(hydroxymethyl)furan with deep eutectic solvent Lactic acid:Betaine and Pseudomonas putida S12 whole cells

2,5-Bis(hydroxymethyl)furan (BHMF) is one kind of important upgraded derivatives of biobased 5-hydroxymethylfuran (5-HMF). This study verified the feasibility of one-pot chemoenzymatic conversion of biobased D-fructose to BHMF by cascade catalysis with deep eutectic solvent Lactic acid:Betaine (LA:B) and reductase biocatalyst in LA:B - H₂O. Using D-fructose (36.0 g/L) as feedstock, the yield of 5-HMF reached 91.6% in DES LA:B - H₂O (15:85, v:v) at 150 °C for 1.5 h. Using D-fructose (2 mol D-fructose/mol 5-HMF) as cosubstrate, commercial 5-HMF (125 mM) was converted into BHMF at 90.7% yield by whole-cells of Pseudomonas putida S12 within 24 h at 30 °C and pH 8.0. In addition, Pseudomonas Putida S12 could efficiently transform D-fructose-valorized 5-HMF into BHMF [98.4% yield, based on 5-HMF; 90.1% yield, based on substrate D-fructose] in DES LA:B - H₂O. An efficient chemoenzymatic valorization of D-fructose to BHMF was developed in a benign reaction system.

Establishment of Kluyveromyces marxianus as a Microbial Cell Factory for Lignocellulosic Processes: Production of High Value Furan Derivatives

The establishment of lignocellulosic biorefineries is dependent on microorganisms being able to cope with the stressful conditions resulting from the release of inhibitory compounds during biomass processing. The yeast Kluyveromyces marxianus has been explored as an alternative microbial factory due to its thermotolerance and ability to natively metabolize xylose. The lignocellulose-derived inhibitors furfural and 5-hydroxymethylfurfural (HMF) are considered promising building-block platforms that can be converted into a wide variety of high-value derivatives. Here, several K. marxianus strains, isolated from cocoa fermentation, were evaluated for xylose consumption and tolerance towards acetic acid, furfural, and HMF. The potential of this yeast to reduce furfural and HMF at high inhibitory loads was disclosed and characterized. Our results associated HMF reduction with NADPH while furfural-reducing activity was higher with NADH. In addition, furans' inhibitory effect was higher when combined with xylose consumption. The furan derivatives produced by K. marxianus in different conditions were identified. Furthermore, one selected isolate was efficiently used as a whole-cell biocatalyst to convert furfural and HMF into their derivatives, furfuryl alcohol and 2,5-bis(hydroxymethyl)furan (BHMF), with high yields and productivities. These results validate K. marxianus as a promising microbial platform in lignocellulosic biorefineries.

Engineering Promiscuous Alcohol Dehydrogenase Activity of a Reductive Aminase AspRedAm for Selective Reduction of Biobased Furans

Catalytic promiscuity is a promising starting point for improving the existing enzymes and even creating novel enzymes. In this work, site-directed mutagenesis was performed to improve promiscuous alcohol dehydrogenase activity of reductive aminase from Aspergillus oryzae (AspRedAm). AspRedAm showed the cofactor preference toward NADPH in reductive aminations, while it favored NADH in the reduction reactions. Some key amino acid residues such as N93, I118, M119, and D169 were identified for mutagenesis by molecular docking. Variant N93A showed the optimal pH and temperature of 8 and 30°C, respectively, in the reduction of 5-hydroxymethylfurfural (HMF). The thermostability was enhanced upon mutation of N93 to alanine. The catalytic efficiency of variant N93A (k_cat/K_m, 23.6 mM⁻¹ s⁻¹) was approximately 2-fold higher compared to that of the wild-type (WT) enzyme (13.1 mM⁻¹ s⁻¹). The improved catalytic efficiency of this variant may be attributed to the reduced steric hindrance that stems from the smaller side chain of alanine in the substrate-binding pocket. Both the WT enzyme and variant N93A had broad substrate specificity. Escherichia coli (E. coli) cells harboring plain vector enabled selective reduction of biobased furans to target alcohols, with the conversions of 35–95% and the selectivities of >93%. The introduction of variant N93A to E. coli resulted in improved substrate conversions (>98%) and selectivities (>99%).

Advances in Electrochemical Modification Strategies of 5-Hydroxymethylfurfural

The development of electrochemical catalytic conversion of 5-hydroxymethylfurfural (HMF) has recently gained attention as a potentially scalable approach for both oxidation and reduction processes yielding value-added products. While the possibility of electrocatalytic HMF transformations has been demonstrated, this growing research area is in its initial stages. Additionally, its practical applications remain limited due to low catalytic activity and product selectivity. Understanding the catalytic processes and design of electrocatalysts are important in achieving a selective and complete conversion into the desired highly valuable products. In this Minireview, an overview of the most recent status, advances, and challenges of oxidation and reduction processes of HMF was provided. Discussion and summary of voltammetric studies and important reaction factors (e. g., catalyst type, electrode material) were included. Finally, biocatalysts (e. g., enzymes, whole cells) were introduced for HMF modification, and future opportunities to combine biocatalysts with electrochemical methods for the production of high-value chemicals from HMF were discussed.

Recent advancements in the synthesis of novel thermostable biocatalysts and their applications in commercially important chemoenzymatic conversion processes

Thermostable enzymes are a field of growing interest in bioremediation, pharmaceuticals, food industry etc., due to their ability to catalyze bio reactions at high temperatures. This review aims to provide an overview on extremophiles with a special focus on thermophiles and enzymes produced from extremophilic bacteria. Novel thermostable catalysts, used in producing commercially important chemicals, are discussed in this review. Various classes of enzymes produced by microbes, synthesis of thermozymes and comparison with enzymes produced at optimal conditions are critically discussed. A detailed discussion on immobilized enzymes in comparisons with free enzymes, produced by extremozymes, is included. Different parameters which affect enzyme production are also discussed. The current industrial trends along with the future of biocatalysts in the production of chemicals using efficient methods are also discussed.

Improved Bio-Synthesis of 2,5-bis(hydroxymethyl)furan by Burkholderia contaminans NJPI-15 With Co-substrate

Upgrading of biomass derived 5-hydroxymethylfurfural (HMF) has attracted considerable interest recently. A new highly HMF-tolerant strain of Burkholderia contaminans NJPI-15 was isolated in this study, and the biocatalytic reduction of HMF into 2,5-bis(hydroxymethyl)furan (BHMF) using whole cells was reported. Co-substrate was applied to improve the BHMF yield and selectivity of this strain as well as HMF-tolerant level. The catalytic capacity of the cells can be substantially improved by Mn²⁺ ion. The strain exhibited good catalytic performance at a pH range of 6.0–9.0 and a temperature range of 25°C–35°C. In addition, 100 mM HMF could be reduced to BHMF by the B. contaminans NJPI-15 resting cells in presence of 70 mM glutamine and 30 mM sucrose, with a yield of 95%. In the fed-batch strategy, 656 mM BHMF was obtained within 48 h, giving a yield of 93.7%. The reported utilization of HMF to produce BHMF is a promising industrially sound biocatalytic process.

Biotechnological production and high potential of furan-based renewable monomers and polymers

Of the 25 million tons of plastic waste produced every year in Europe, 40% of these are not reused or recycled, thus contributing to environmental pollution, one of the major challenges of the 21st century. Most of these plastics are made of petrochemical-derived polymers which are very difficult to degrade and as a result, a lot of research efforts have been made on more environmentally friendly alternatives. Bio-based monomers, derived from renewable raw materials, constitute a possible solution for the replacement of oil-derived monomers, with furan derivatives that emerged as platform molecules having a great potential for the synthesis of biobased polyesters, polyamides and their copolymers. This review article summarizes the latest developments in biotechnological production of furan compounds that can be used in polymer chemistry as well as in their conversion into polymers. Moreover, the biodegradability of the resulting materials is discussed.

Biocatalytic Transformation of 5-Hydroxymethylfurfural into 2,5-di(hydroxymethyl)furan by a Newly Isolated Fusarium striatum Strain

The compound 2,5-di(hydroxymethyl)furan (DHMF) is a high-value chemical block that can be synthesized from 5-hydroxymethylfurfural (HMF), a platform chemical that results from the dehydration of biomass-derived carbohydrates. In this work, the HMF biotransformation capability of different Fusarium species was evaluated, and F. striatum was selected to produce DHMF. The effects of the inoculum size, glucose concentration and pH of the media over DHMF production were evaluated by a 23 factorial design. A substrate feeding approach was found suitable to overcome the toxicity effect of HMF towards the cells when added at high concentrations (>75 mM). The process was successfully scaled-up at bioreactor scale (1.3 L working volume) with excellent DHMF production yields (95%) and selectivity (98%). DHMF was purified from the reaction media with high recovery and purity by organic solvent extraction with ethyl acetate.

Pushing the limits: Cyclodextrin-based intensification of bioreductions

The asymmetric reduction of ketones is a frequently used synthesis route towards chiral alcohols. Amongst available chemo- and biocatalysts the latter stand out in terms of product enantiopurity. Their application is, however, restricted by low reaction output, often rooted in limited enzyme stability under operational conditions. Here, addition of 2-hydroxypropyl-β-cyclodextrin to bioreductions of o-chloroacetophenone enabled product concentrations of up to 29 % w/v at full conversion and 99.97 % e.e. The catalyst was an E. coli strain co-expressing NADH-dependent Candida tenuis xylose reductase and a yeast formate dehydrogenase for coenzyme recycling. Analysis of the lyophilized biocatalyst showed that E. coli cells were leaky with catalytic activity found as free-floating enzymes and associated with the biomass. The biocatalyst was stabilized and activated in the reaction mixture by 2-hydroxypropyl-β-cyclodextrin. Substitution of the wild-type xylose reductase by a D51A mutant further improved bioreductions. In previous optimization strategies, hexane was added as second phase to protect the labile catalyst from adverse effects of hydrophobic substrate and product. The addition of 2-hydroxypropyl-β-cyclodextrin (11 % w/v) instead of hexane (20 % v/v) increased the yield on biocatalyst 6.3-fold. A literature survey suggests that bioreduction enhancement by addition of cyclodextrins is not restricted to specific enzyme classes, catalyst forms or substrates.

Design and optimization of bioreactor to boost carbon dioxide assimilation in RuBisCo-equipped Escherichia coli

Global warming is a surging issue that has provoked the demand of green process to mitigate carbon dioxide. In this context, RuBisCo-equipped Escherichia coli has first developed and evaluated the CO₂-assimiliable capability based on the mass balance in three devices: Flask-based in CO₂ incubator (FIC), two-layered device (TLD) and CO₂ bubbling device (CBD) systematically. With the forced diffusion of 5% CO₂ in CBD, which confers an efficient attack of CO₂ to RuBisCo, the CO₂ assimilation increased from -5.03 to -2.63 g-CO₂/g-DCW. Furthermore, boosted CO₂ assimilation ability was observed by co-expression of GroELS chaperone with 71% reduction on CO₂ release. By DNA sequencing and tandem MS/MS analysis, the toxicity of RuBisCo and PRK was identified to interfere the sugar metabolism and energy producing, while the cell morphology was changed and observed in RuBisCo-equipped E. coli. Our study provides a new perspective of higher CO₂ assimilation for sustainable to eco-friendly green bioprocess.

Biotransformation of 5-hydroxymethylfurfural into 2,5-dihydroxymethylfuran by Ganoderma sessile and toxicological assessment of both compounds

Biotransformation has the advantages of low cost and environmental protection and is a preferred method for production of compounds. At present, most 2,5-dihydroxymethylfuran (DHMF) is synthesized by chemical methods. In this study, 12.008 μg/mL DHMF was produced from 9.045 μg/mL 5-hydroxymethylfurfural (5-HMF) with a yield of 1.33 g/g using the crude enzymes from fungus Ganoderma sessile. To elucidate the toxic potential for both compounds, cytotoxicity tests and acute toxicity were evaluated respectively. 5-HMF induced weak cytotoxicity in HCT-8, A549 and SGC-7901 cells and DHMF exerted no cytotoxicity on HCT-8 while induced inhibition proliferation of A549 and SGC-7901 cells. The acute toxicity study showed no mortality happened in any group even at the single dose of 2000 mg/kg body weight. These results suggest it is feasible to convert 5-HMF to DHMF via crude enzymes from fungus G. sessile under mild condition, and that DHMF displays a potential effect of antitumor in vitro with little acute toxicity.

Efficient biotransformation of 5-hydroxymethylfurfural to 5-hydroxymethyl-2-furancarboxylic acid by a new whole-cell biocatalyst Pseudomonas aeruginosa PC-1

An efficient HMFCA production strategy was developed using a new whole-cell biocatalyst from Pseudomonas aeruginosa PC-1.

Biocatalytic production of 2,5-furandicarboxylic acid: recent advances and future perspectives

2,5-Furandicarboxylic acid (FDCA) is attracting increasing attention because of its potential applications as a sustainable substitute to petroleum-derived terephthalic acid for the production of bio-based polymers, such as poly(ethylene 2,5-furandicarboxylate) (PEF). Many catalytic methods have been developed for the synthesis of FDCA, including chemocatalysis, biocatalysis, photocatalysis, and electrocatalysis. Biocatalysis is a promising approach with advantages that include mild reaction condition, lower cost, higher selectivity, and environment amity. However, the biocatalytic production of FDCA has hardly been reviewed. To fully understand the current research developments, this review comprehensively considers the research progress on toxic effects and biodegradation of furan aldehydes, and then summarizes the latest achievements concerning the synthesis of FDCA from 5-hydroxymethylfurfural and other chemicals, such as 2-furoic acid and 5-methoxymethylfurfural. Our primary focus is on biocatalytic methods, including enzymatic catalysis (in vitro) and whole-cell catalysis (in vivo). Furthermore, future research directions and general developmental trends for more efficient biocatalytic production of FDCA are also proposed.

One-pot chemo-enzymatic conversion of D-xylose to furfuralcohol by sequential dehydration with oxalic acid plus tin-based solid acid and bioreduction with whole-cells

In this study, organic acid could be used as co-catalyst for assisting solid acid SO₄^2-/SnO₂-argil to convert hemicellulose-derived D-xylose into furfural. The relationship between pKa of organic acid and turnover frequency (TOF) of co-catalysis with organic acid plus SO₄^2-/SnO₂-argil was explored on the conversion of D-xylose to furfural. Oxalic acid (pKa = 1.25) (0.35 wt%) was found to be the optimum co-catalyst for assisting SO₄^2-/SnO₂-argil (3.6 wt%) to synthesize furfural from D-xylose (20 g/L) at 180 °C for 20 min, and the furfural yield and TOF could be obtained at 57.07% and 6.26 h^-1, respectively. Finally, the obtained furfural (107.6 mM) could be completely biotransformed to furfuralcohol by recombinant Escherichia coli CCZU-K14 whole-cells at 30 °C and pH 6.5 in the presence of 1.5 mol glucose/mol furfural and 400 mM D-xylose. Clearly, this strategy shows high potential application for the effective synthesis of furfuralcohol from biomass-derived D-xylose.

Improved synthesis of 2,5-bis(hydroxymethyl)furan from 5-hydroxymethylfurfural using acclimatized whole cells entrapped in calcium alginate

Upgrading of biomass-derived 5-hydroxymethylfurfural (HMF) has attracted considerable interest recently. In this work, efficient synthesis of 2,5-bis(hydroxymethyl)furan (BHMF) from HMF was reported with the acclimatized Meyerozyma guilliermondii SC1103 cells entrapped in calcium alginate beads. Catalytic activities of the cells as well as their HMF-tolerant level increased significantly upon acclimatization and immobilization. BHMF was obtained within 7-24 h with good yields (82-85%) and excellent selectivities (99%) when the substrate concentrations were 200-300 mM. In scale-up synthesis, BHMF of up to 181 mM was produced within 7 h, and its productivity was approximately 3.3 g/L h. In addition, the immobilized biocatalyst showed satisfactory operational stability; the cell viability of 70% was retained after reuse 4 times. With rice straw hydrolysate as co-substrate, both the reaction rate and selectivity decreased, likely due to the deleterious influence of xylose in the hydrolysate.

Enhanced bioreduction synthesis of ethyl (R)-4-chloro-3-hydroybutanoate by alkalic salt pretreatment

In this study, biomass-hydrolysate was used for enhancing the bioreduction of ethyl 4-chloro-3-oxobutanoate (COBE). Firstly, dilute alkalic salt pretreatment was attempted to pretreat bamboo shoot shell (BSS). It was found that enzymatic in situ hydrolysis of 20-50 g/L BSS pretreated with dilute alkalic salts (0.4% Na₂CO₃, 0.032% Na₂S) at 7.5% sulfidity by autoclaving at 110 °C for 40 min gave sugar yields at 59.9%-73.5%. Moreover, linear relationships were corrected on solid recovery-total delignification-sugar yield. In BSS-hydrolysates, xylose and glucose could promote the reductase activity of recombinant E. coli CCZU-A13. Compared with glucose, hydrolysate could increase the reductase activity by 1.35-folds. Furthermore, the cyclohexane-hydrolysate (10:90, v/v) biphasic media containing ethylene diamine tetraacetic acid (EDTA, 40 mM) and l-glutamine (150 mM) was built for the effective biosynthesis of ethyl (R)-4-chloro-3-hydroxybutanoate [(R)-CHBE] (94.6% yield) from 500 mM COBE. In conclusion, this strategy has high potential for the effective biosynthesis of (R)-CHBE (>99% e.e.).

Efficient conversion of 5-hydroxymethylfurfural to high-value chemicals by chemo- and bio-catalysis

5-hydroxymethylfurfural (HMF) is a very important versatile platform compound derived from renewable biomass.