Iron chelators: as therapeutic agents in diseases

The concentration of iron is tightly regulated, making it an essential element. Various cellular processes in the body rely on iron, such as oxygen sensing, oxygen transport, electron transfer, and DNA synthesis. Iron excess can be toxic because it participates in redox reactions that catalyze the production of reactive oxygen species and elevate oxidative stress. Iron chelators are chemically diverse; they can coordinate six ligands in an octagonal sequence. Because of the ability of chelators to trap essential metals, including iron, they may be involved in diseases caused by oxidative stress, such as infectious diseases, cardiovascular diseases, neurodegenerative diseases, and cancer. Iron-chelating agents, by tightly binding to iron, prohibit it from functioning as a catalyst in redox reactions and transfer iron and excrete it from the body. Thus, the use of iron chelators as therapeutic agents has received increasing attention. This review investigates the function of various iron chelators in treating iron overload in different clinical conditions.

Carbonate-Metal Reactions in the Lower Mantle

Carbonates are important carbon-bearing phases in the mantle. While their role in upper mantle petrologic processes has been well studied, their effect on phase relations, melting, and transport properties in the lower mantle is less understood. The stability of carbonates in the mantle depends on a host of factors, including pressure, temperature, oxygen fugacity, and reactions with surrounding mantle phases. To understand the stability of carbonates in the presence of metal in the lower mantle, carbonate-metal reaction experiments on the Fe-Si-Ca-Mg-C-O system were conducted up to 124 GPa and 3200 K. We find that carbonates react with iron alloys to form silicates, iron carbides, and oxides. However, the temperature at which these reactions occur increases with pressure, indicating that along a geotherm in the lowermost mantle carbonates are the stable carbon-bearing phase. Carbon is found to be less siderophilic at high-pressure compared to silicon.

Advanced Electroanalysis for Electrosynthesis

Electrosynthesis is a popular, environmentally friendly substitute for conventional organic methods. It involves using charge transfer to stimulate chemical reactions through the application of a potential or current between two electrodes. In addition to electrode materials and the type of reactor employed, the strategies for controlling potential and current have an impact on the yields, product distribution, and reaction mechanism. In this Review, recent advances related to electroanalysis applied in electrosynthesis were discussed. The first part of this study acts as a guide that emphasizes the foundations of electrosynthesis. These essentials include instrumentation, electrode selection, cell design, and electrosynthesis methodologies. Then, advances in electroanalytical techniques applied in organic, enzymatic, and microbial electrosynthesis are illustrated with specific cases studied in recent literature. To conclude, a discussion of future possibilities that intend to advance the academic and industrial areas is presented.

Predicting Redox Conditions in Groundwater at a National Scale Using Random Forest Classification

Redox conditions in groundwater may markedly affect the fate and transport of nutrients, volatile organic compounds, and trace metals, with significant implications for human health. While many local assessments of redox conditions have been made, the spatial variability of redox reaction rates makes the determination of redox conditions at regional or national scales problematic. In this study, redox conditions in groundwater were predicted for the contiguous United States using random forest classification by relating measured water quality data from over 30,000 wells to natural and anthropogenic factors. The model correctly predicted the oxic/suboxic classification for 78 and 79% of the samples in the out-of-bag and hold-out data sets, respectively. Variables describing geology, hydrology, soil properties, and hydrologic position were among the most important factors affecting the likelihood of oxic conditions in groundwater. Important model variables tended to relate to aquifer recharge, groundwater travel time, or prevalence of electron donors, which are key drivers of redox conditions in groundwater. Partial dependence plots suggested that the likelihood of oxic conditions in groundwater decreased sharply as streams were approached and gradually as the depth below the water table increased. The probability of oxic groundwater increased as base flow index values increased, likely due to the prevalence of well-drained soils and geologic materials in high base flow index areas. The likelihood of oxic conditions increased as topographic wetness index (TWI) values decreased. High topographic wetness index values occur in areas with a propensity for standing water and overland flow, conditions that limit the delivery of dissolved oxygen to groundwater by recharge; higher TWI values also tend to occur in discharge areas, which may contain groundwater with long travel times. A second model was developed to predict the probability of elevated manganese (Mn) concentrations in groundwater (i.e., ≥50 μg/L). The Mn model relied on many of the same variables as the oxic/suboxic model and may be used to identify areas where Mn-reducing conditions occur and where there is an increased risk to domestic water supplies due to high Mn concentrations. Model predictions of redox conditions in groundwater produced in this study may help identify regions of the country with elevated groundwater vulnerability and stream vulnerability to groundwater-derived contaminants.

The Copper Reduction Potential Determines the Reductive Cytotoxicity: Relevance to the Design of Metal-Organic Antitumor Drugs

Copper-organic compounds have gained momentum as potent antitumor drug candidates largely due to their ability to generate an oxidative burst upon the transition of Cu2+ to Cu1+ triggered by the exogenous-reducing agents. We have reported the differential potencies of a series of Cu(II)-organic complexes that produce reactive oxygen species (ROS) and cell death after incubation with N-acetylcysteine (NAC). To get insight into the structural prerequisites for optimization of the organic ligands, we herein investigated the electrochemical properties and the cytotoxicity of Cu(II) complexes with pyridylmethylenethiohydantoins, pyridylbenzothiazole, pyridylbenzimidazole, thiosemicarbazones and porphyrins. We demonstrate that the ability of the complexes to kill cells in combination with NAC is determined by the potential of the Cu+2 → Cu+1 redox transition rather than by the spatial structure of the organic ligand. For cell sensitization to the copper-organic complex, the electrochemical potential of the metal reduction should be lower than the oxidation potential of the reducing agent. Generally, the structural optimization of copper-organic complexes for combinations with the reducing agents should include uncharged organic ligands that carry hard electronegative inorganic moieties.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Electrochemical Characterization of Neurotransmitters in a Single Submicron Droplet

Single-entity electrochemistry, which employs electrolysis during the collision of single particles on ultramicroelectrodes, has witnessed significant advancements in recent years, enabling the observation and characterization of individual particles. Information on a single aqueous droplet (e.g., size) can also be studied based on the redox species contained therein. Dopamine, a redox-active neurotransmitter, is usually present in intracellular vesicles. Similarly, in the current study, the electrochemical properties of neurotransmitters in submicron droplets were investigated. Because dopamine oxidation is accompanied by proton transfer, unique electrochemical properties of dopamine were observed in the droplet. We also investigated the electrochemical properties of the adsorbed droplets containing DA and the detection of oxidized dopamine by the recollision phenomenon.

Enhanced Redox Cycle of Rod-Shaped MIL-88A/SnFe2O4@MXene Sheets for Fenton-like Degradation of Congo Red: Optimization and Mechanism

This study intended to fabricate a novel Fenton-like catalyst by supporting the rod-like MIL-88A and the magnetic tin ferrite nanoparticles (SnFe2O4) on the MXene sheets (MIL-88A/SnFe2O4@MXene). The well fabrication and determination of the MIL-88A/SnFe2O4@MXene properties were investigated using SEM, XPS, VSM, Zeta potential, XRD, and FTIR tools. The Fenton-like degradation reaction of CR by MIL-88A/SnFe2O4@MXene was thoroughly studied to identify the optimal proportions of the catalyst components, the impact of CR and H2O2 concentrations, as well as the effect of raising the temperature and the pH medium of the catalytic system and the catalyst dosage. Kinetics studies were executed to analyze the decomposition of CR and H2O2 using First-order and Second-order models. Furthermore, the degradation mechanism was proposed based on the scavenging test that proceeded in the presence of chloroform and t-butanol, in addition to the XPS analysis that clarified the participation of the containing metal species: Fe, Sn, and Ti, and the formation of a continual redox cycle. The obtained intermediates during the CR degradation were defined by GC-MS. A recyclability test was performed on MIL-88A/SnFe2O4@MXene during five runs of the Fenton-like degradation of CR molecules. Finally, the novel MIL-88A/SnFe2O4@MXene Fenton-like catalyst could be recommended as a propitious heterogeneous catalyst with a continuous redox cycle and a recyclability merit.

From Metabolism to Vitality: Uncovering Riboflavin's Importance in Poultry Nutrition

Riboflavin, or vitamin B2, is indispensable for poultry, profoundly impacting their metabolic equilibrium, growth, and overall health. In a climate of increasing demand for poultry products and heightened production intensity, grasping the multifaceted roles of riboflavin in domestic fowl nutrition becomes paramount. This essential vitamin serves as a precursor to two vital coenzymes, flavin mononucleotide and flavin adenine dinucleotide, integral players in pivotal redox reactions and energy metabolism. Inadequate riboflavin levels translate into stunted growth, skeletal deformities, and compromised feed conversion efficiency, thereby adversely affecting poultry performance and bottom-line profitability. Riboflavin goes beyond its fundamental role, ameliorating nutrient utilization, facilitating protein synthesis, and augmenting enzyme activity, rightfully earning its epithet as the "growth-promoting vitamin". Poultry's reproductive success intricately hinges on riboflavin levels, dictating egg production and hatchability. It is imperative to note that riboflavin requirements exhibit variations among poultry species and distinct production phases, emphasizing the importance of judicious and balanced supplementation strategies. Aligning dietary recommendations with genetic advancements holds the promise of fostering sustainable growth within the poultry sector. Exploring the multifaceted aspects of riboflavin empowers researchers, nutritionists, and producers to elevate poultry nutrition and overall well-being, harmonizing with the industry's evolving demands.

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.

The Spontaneous Electron-Mediated Redox Processes on Sprayed Water Microdroplets

Water is considered as an inert environment for the dispersion of many chemical systems. However, by simply spraying bulk water into microsized droplets, the water microdroplets have been shown to possess a large plethora of unique properties, including the ability to accelerate chemical reactions by several orders of magnitude compared to the same reactions in bulk water, and/or to trigger spontaneous reactions that cannot occur in bulk water. A high electric field (∼10⁹ V/m) at the air-water interface of microdroplets has been postulated to be the probable cause of the unique chemistries. This high field can even oxidize electrons out of hydroxide ions or other closed-shell molecules dissolved in water, forming radicals and electrons. Subsequently, the electrons can trigger further reduction processes. In this Perspective, by showing a large number of such electron-mediated redox reactions, and by studying the kinetics of these reactions, we opine that the redox reactions on sprayed water microdroplets are essentially processes using electrons as the charge carriers. The potential impacts of the redox capability of microdroplets are also discussed in a larger context of synthetic chemistry and atmospheric chemistry.

Modified quantum mechanical approach for the estimation of single-electron reduction potential of nitroaromatic compounds in aqueous medium

The midpoint single-electron reduction potential of nitroaromatic compounds in aqueous medium at pH 7.0 (potential of ArNO₂/ArNO₂·^- couple, E_m7) frequently determines their therapeutic and/or toxic properties. However, its estimation remains a complex problem. We propose a modified method of E_m7 estimation by quantum mechanical calculations, based on the use of the dielectric continuum model together with a certain number of H₂O molecules at the vicinity of nitro group. The optimal number of H₂O molecules corresponds to a minimal difference between the experimentally determined and calculated values of E_m7, and/or the most negative value of calculated E_m7. This enabled us to calculate the E_m7 values for a number of ArNO₂ (n = 19) with the average deviation of 0.027 V from the experimentally determined ones. Apart from nitrobenzene derivatives, the application of this approach for the representatives of nitropyridines, nitrofurans, nitrothiophenes, and nitrothiazoles was demonstrated. In this case, nitroimidazole derivatives are an exception, evidently due to a strong proton accepting properties of N3 atom of their free radicals.

NO Selective Catalytic Reduction over Atom-Pair Active Sites Accelerated via In Situ NO Oxidation

Selective catalytic reduction (SCR) of NO_x with NH₃ is the most efficient technology for NO_x emissions control, but the activity of catalysts decreases exponentially with the decrease in reaction temperature, hindering the application of the technology in low-temperature SCR to treat industrial stack gases. Here, we present an industrially practicable technology to significantly enhance the SCR activity at low temperatures (<250 °C). By introducing an appropriate amount of O₃ into the simulated stack gas, we find that O₃ can stoichiometrically oxidize NO to generate NO₂, which enables NO reduction to follow the fast SCR mechanism so as to accelerate SCR at low temperatures, and, in particular, an increase in SCR rate by more than four times is observed over atom-pair V₁-W₁ active sites supported on TiO₂(001) at 200 °C. Using operando SCR tests and in situ diffuse reflectance infrared Fourier transform spectra, we reveal that the introduction of O₃ allows SCR to proceed along a NH₄NO₃-mediated Langmuir-Hinshelwood model, in which the adsorbed nitrate species speed up the re-oxidation of the catalytic sites that is the rate-limiting step of SCR, thus leading to the enhancement of activity at low temperatures. This technology could be applicable in the real stack gas conditions because O₃ exclusively oxidizes NO even in the co-presence of SO₂ and H₂O, which provides a general strategy to improve low-temperature SCR efficacy from another perspective beyond designing catalysts.

An exploratory steady-state redox model of photosynthetic linear electron transport for use in complete modelling of photosynthesis for broad applications

A photochemical model of photosynthetic electron transport (PET) is needed to integrate photophysics, photochemistry, and biochemistry to determine redox conditions of electron carriers and enzymes for plant stress assessment and mechanistically link sun-induced chlorophyll fluorescence to carbon assimilation for remotely sensing photosynthesis. Towards this goal, we derived photochemical equations governing the states and redox reactions of complexes and electron carriers along the PET chain. These equations allow the redox conditions of the mobile plastoquinone pool and the cytochrome b₆ f complex (Cyt) to be inferred with typical fluorometry. The equations agreed well with fluorometry measurements from diverse C₃ /C₄ species across environments in the relationship between the PET rate and fraction of open photosystem II reaction centres. We found the oxidation of plastoquinol by Cyt is the bottleneck of PET, and genetically improving the oxidation of plastoquinol by Cyt may enhance the efficiency of PET and photosynthesis across species. Redox reactions and photochemical and biochemical interactions are highly redundant in their complex controls of PET. Although individual reaction rate constants cannot be resolved, they appear in parameter groups which can be collectively inferred with fluorometry measurements for broad applications. The new photochemical model developed enables advances in different fronts of photosynthesis research.

Exploring the Reactivity of Polyoxometalates toward Proteins: From Interactions to Mechanistic Insights

The latest advances in the study of the reactivity of metal-oxo clusters toward proteins showcase how fundamental insights obtained so far open new opportunities in biotechnology and medicine. In this Perspective, these studies are discussed through the lens of the reactivity of a family of soluble anionic metal-oxo nanoclusters known as polyoxometalates (POMs). POMs act as catalysts in a wide range of reactions with several different types of biomolecules and have promising therapeutic applications due to their antiviral, antibacterial, and antitumor activities. However, the lack of a detailed understanding of the mechanisms behind biochemically relevant reactions-particularly with complex biological systems such as proteins-still hinders further developments. Hence, in this Perspective, special attention is given to reactions of POMs with peptides and proteins showcasing a molecular-level understanding of the reaction mechanism. In doing so, we aim to highlight both existing limitations and promising directions of future research on the reactivity of metal-oxo clusters toward proteins and beyond.

A Hitchhiker's Guide to Supplying Enzymatic Reducing Power into Synthetic Cells

The construction from scratch of synthetic cells by assembling molecular building blocks is unquestionably an ambitious goal from a scientific and technological point of view. To realize functional life-like systems, minimal enzymatic modules are required to sustain the processes underlying the out-of-equilibrium thermodynamic status hallmarking life, including the essential supply of energy in the form of electrons. The nicotinamide cofactors NAD(H) and NADP(H) are the main electron carriers fueling reductive redox reactions of the metabolic network of living cells. One way to ensure the continuous availability of reduced nicotinamide cofactors in a synthetic cell is to build a minimal enzymatic module that can oxidize an external electron donor and reduce NAD(P)+. In the diverse world of metabolism there is a plethora of potential electron donors and enzymes known from living organisms to provide reducing power to NAD(P)+ coenzymes. This perspective proposes guidelines to enable the reduction of nicotinamide cofactors enclosed in phospholipid vesicles, while avoiding high burdens of or cross-talk with other encapsulated metabolic modules. By determining key requirements, such as the feasibility of the reaction and transport of the electron donor into the cell-like compartment, we select a shortlist of potentially suitable electron donors. We review the most convenient proteins for the use of these reducing agents, highlighting their main biochemical and structural features. Noting that specificity toward either NAD(H) or NADP(H) imposes a limitation common to most of the analyzed enzymes, we discuss the need for specific enzymes─transhydrogenases─to overcome this potential bottleneck.

Reducing Carbonaceous Salts for Facile Fabrication of Monolayer Graphene

Novel methods and mechanisms for graphene fabrication are of great importance in the development of materials science. Herein, a facile method to directly convert carbonaceous salts into high-quality freestanding graphene via a simple one-step redox reaction, is reported. The redox couple can be a combination of sodium borohydride (reductant) and sodium carbonate (oxidant), which can readily react with each other when evenly mixed/calcined and yield gram-scale, high-quality, contamination-free, micron-sized, freestanding graphene. More importantly, this method is applicable to a variety of input reductants and oxidants that are low cost and easily accessible. An in-depth investigation reveals that the carbonaceous oxidants can not only provide reduced carbon mass for graphene formation but also act as a self-template to guide the polymerization of carbon atoms following the pattern of the monolayer, six-carbon rings. In addition, the direct formation of graphene exhibits theoretically lower energy barriers than that of other allotropes such as fullerene and carbon nanotube. This facile, low-cost, scalable, and applicable method for mass production of high-quality graphene is expected to revolutionize graphene fabrication technology and boost its practical application to the industry level.

Thermogenic Adipose Redox Mechanisms: Potential Targets for Metabolic Disease Therapies

Metabolic diseases, such as diabetes and non-alcoholic fatty liver disease (NAFLD), have several negative health outcomes on affected humans. Dysregulated energy metabolism is a key component underlying the pathophysiology of these conditions. Adipose tissue is a fundamental regulator of energy homeostasis that utilizes several redox reactions to carry out the metabolism. Brown and beige adipose tissues, in particular, perform highly oxidative reactions during non-shivering thermogenesis to dissipate energy as heat. The appropriate regulation of energy metabolism then requires coordinated antioxidant mechanisms to counterbalance the oxidation reactions. Indeed, non-shivering thermogenesis activation can cause striking changes in concentrations of both oxidants and antioxidants in order to adapt to various oxidative environments. Current therapeutic options for metabolic diseases either translate poorly from rodent models to humans (in part due to the challenges of creating a physiologically relevant rodent model) or tend to have numerous side effects, necessitating novel therapies. As increased brown adipose tissue activity results in enhanced energy expenditure and is associated with beneficial effects on metabolic health, such as decreased obesity, it has gathered great interest as a modulator of metabolic disease. One potential reason for the beneficial health effects may be that although non-shivering thermogenesis is enormously oxidative, it is also associated with decreased oxidant formation after its activation. However, targeting its redox mechanisms specifically to alter metabolic disease remains an underexplored area. Therefore, this review will discuss the role of adipose tissue in energy homeostasis, non-shivering thermogenesis in adults, and redox mechanisms that may serve as novel therapeutic targets of metabolic disease.

Trinitroaromatic Salts as High-Energy-Density Organic Cathode Materials for Li-Ion Batteries

Even though organic molecules with designed structures can be assembled into high-capacity electrode materials, only limited functional groups such as -C═O and -C═N- could be designed as high-voltage cathode materials with enough high capacity. Here, we propose a common chemical raw material, trinitroaromatic salt, to have promising potential to develop organic cathode materials with high discharge voltage and capacity through a strong delocalization effect between -NO₂ and aromatic ring. Our first-principles calculations show that electrochemical reactions of trinitroaromatic potassium salt C₆H₂(NO₂)₃OK are a 6-electron charge-transfer process, providing a high discharge capacity of 606 mAh g^-1 and two voltage plateaus of 2.40 and 1.97 V. Electronic structure analysis indicates that the discharge process from C₆H₂(NO₂)₃OK to C₆H₂(NO₂Li₂)₃OK stabilizes oxidized [C₆]ⁿ⁺ to achieve a stable conjugated structure through electron delocalization from -NO₂ to [C₆]ⁿ⁺. The ordered layer structure C₆H₂(NO₂)₃OK can provide large spatial pore channels for Li-ion transport, achieving a high ion diffusion coefficient of 3.41 × 10^-6 cm² s^-1.

Chances and challenges of long-distance electron transfer for cellular redox reactions

Biological redox reactions often use a set-up in which final redox partners are localized in different compartments and electron transfer (ET) among them is mediated by redox-active molecules. In enzymes, these ET processes occur over nm distances, whereas multi-protein filaments bridge μm ranges. Electrons are transported over cm ranges in cable bacteria, which are formed by thousands of cells. In this review, we describe molecular mechanisms that explain how respiration in a compartmentalized set-up ensures redox homeostasis. We highlight mechanistic studies on ET through metal-free peptides and proteins demonstrating that long-distance ET is possible because amino acids Tyr, Trp, Phe, and Met can act as relay stations. This cuts one long ET into several short reaction steps. The chances and challenges of long-distance ET for cellular redox reactions are then discussed.

Induction of immunogenic cell death in murine colon cancer cells by ferrocene-containing redox phospholipid polymers

Immunogenic cell death (ICD), activated by damage-associated molecular patterns (DAMPs), is an apoptotic cell death process that elicits anti-tumor immunity. Although anticancer drugs that can induce ICD are promising for cancer treatment, the design strategy for ICD inducers remains unclear. In this study, we demonstrated the cell-penetrating redox phospholipid polymer poly(2-methacryloyloxyethyl phosphorylcholine-co-vinyl ferrocene) (pMFc) inducing ICD in murine colon cancer CT26 cells. pMFc produced oxidative stress by extracting electrons from CT26 cells and induced the release of DAMPs, such as calreticulin, adenosine triphosphate, and high-mobility group box 1. Moreover, the injection of pMFc-treated CT26 cells inhibited tumor formation in subsequently challenged CT26 cells, indicating that pMFc elicited anti-tumor immunity through ICD. Using in vivo therapy, intra-tumoral injections of pMFc induced complete tumor regression in 20% (1/5) of mice. These results suggested that the redox phospholipid polymer provides a new option for ICD-inducing anticancer polymers.

Engineering at Subatomic Scale: Achieving Selective Catalytic Pathways via Tuning of the Oxidation States in Functionalized Single-Atom Quantum Catalysts

Regulating the catalytic pathways of single-atom sites in single atom catalysts (SACs) is an exciting debate at the moment, which has redirected the research towards understanding and modifying the single-atom catalytic sites through various strategies including altering the coordination environment of single atom for desirable outcomes as well as increasing their number. One useful aspect concerning the tunability of the catalytic pathways of SACs, which has been overlooked, is the oxidation state dynamics of the single atoms. In this study, iron single-atoms (FeSA) with variable oxidation states, dependent on the precursors, are harnessed inside a nitrogen-rich functionalized carbon quantum dots (CQDs) matrix via a facile one-step and low-temperature synthesis process. Dynamic electronic properties are imparted to the FeSAs by the simpler carbon dots matrix of CQDs in order to achieve the desired catalytic pathways of reactive oxygen species (ROS) generation in different environments, which are explored experimentally and theoretically for an in-depth understanding of the redox chemistry that drives the alternative catalytic pathways in FeSA@CQDs. These alternative and oxidation state-dependent catalytic pathways are employed for specific as well as cascade-like activities simulating natural enzymes as well as biomarkers for the detection of cancerous cells.

Characterization of three novel DyP-type peroxidases from Streptomyces chartreusis NRRL 3882

AIMS

Actinobacteria are known to produce extracellular enzymes including DyPs. We set out to identify and characterize novel peroxidases from Streptomyces chartreusis NRRL 3882, because S. chartreusis belongs to the small group of actinobacteria with three different DyPs.

METHODS AND RESULTS

The genome of the actinomycete Streptomyces chartreusis NRRL 3882 was mined for novel DyP-type peroxidases. Three genes encoding for DyP-type peroxidases were cloned and overexpressed in Escherichia coli. Subsequent characterization of the recombinant proteins included examination of operating conditions such as pH, temperature, and H₂ O₂ concentrations, as well as substrate spectrum. Despite their high sequence similarity, the enzymes named SCDYP1-SCDYP3 presented distinct preferences regarding their operating conditions. They showed great divergence in H₂ O₂ tolerance and stability, with SCDYP2 being most active at concentrations above 50 mmol l^-1 . Moreover, SCDYP1 and SCDYP3 preferred acidic pH (typical for DyP-type peroxidases) whereas SCDYP2 was most active at pH 8.

CONCLUSIONS

Regarding the function of DyPs in nature, these results suggest that availability of different DyP variants with complementary activity profiles in one organism might convey evolutionary benefits.

SIGNIFICANCE AND IMPACT OF STUDY

DyP-type peroxidases are able to degrade xenobiotic compounds and thus can be applied in biocatalysis and bioremediation. However, the native function of DyPs and the benefits for their producers largely remain to be elucidated.

Long-Term In-Use NOx Emissions from London Buses with Retrofitted NOx Aftertreatment

Buses constitute a significant source of air pollutant emissions in cities. In this study, we present real-world NO_x emissions from 97 diesel-hybrid buses measured using on-board diagnostic systems over 44 months and 6.35 million km in London. Each bus had previously been retrofitted with a selective catalytic reduction (SCR) aftertreatment system to reduce emissions of nitrogen oxides (NO_x). On average, parallel hybrid (PH) and series hybrid (SH) buses emitted 3.80 g of NO_x/km [standard deviation (SD) of 1.02] and 2.37 g of NO_x/km (SD of 0.51), respectively. The SCR systems reduced engine-out emissions by 79.8% (SD of 5.0) and 87.2% (SD of 2.9) for the PHs and SHs, respectively. Lower ambient temperatures (0-10 °C) increased NO_x emissions of the PHs by 24.2% but decreased NO_x emissions of the SHs by 27.9% compared to values found at more moderate temperatures (10-20 °C). To improve emissions inventories, we provide new distance-based NO_x emissions factors for different ranges of ambient temperature. During the COVID-19 pandemic, the emissions benefits of reduced congestion were largely offset by more frequent route layovers leading to lower SCR temperatures and effectiveness. This study shows that continuous in-service measurements enable quantification of real-world vehicle emissions over a wide range of operations that complements conventional testing approaches.

In-Situ Thermochemical Shock-Induced Stress at the Metal/Oxide Interface Enhances Reactivity of Aluminum Nanoparticles

Although aluminum (Al) nanoparticles have been widely explored as fuels in energetic applications, researchers are still exploring approaches for tuning their energy release profile via microstructural alteration. In this study, we show that a nanocomposite (∼70 nm) of a metal ammine complex, such as tetraamine copper nitrate (Cu(NH3)4(NO3)2/TACN), coated Al nanoparticles containing only 10 wt. % TACN, demonstrates a ∼200 K lower reaction initiation temperature coupled with an order of magnitude enhancement in the reaction rate. Through time/temperature-resolved mass spectrometry and ignition onset measurements at high heating rates, we show that the ignition occurs due to a condensed phase reaction between Al and copper oxide (CuO) crystallized on TACN decomposition. TEM and XRD analyses on the nanoparticles at an intermediate stage show that the rapid heat release from TACN decomposition in-situ enhances the strain on the Al core with induction of nonuniformities in the thickness of its AlOx shell. The thinner region of the nonuniform shell enables rapid mass transfer of Al ions to the crystallized CuO, enabling their condensed phase ignition. Hence, the thermochemical shock from TACN coating induces stresses at the Al/AlOx interface, which effectively switches the usual gas phase O2 diffusion-limited ignition process of Al nanoparticles to become condensed phase Al ion transfer controlled, thereby enhancing their reactivity.

Photocatalytic CO2 Reduction Using TiO2-Based Photocatalysts and TiO2 Z-Scheme Heterojunction Composites: A Review

Photocatalytic CO₂ reduction is a most promising technique to capture CO₂ and reduce it to non-fossil fuel and other valuable compounds. Today, we are facing serious environmental issues due to the usage of excessive amounts of non-renewable energy resources. In this aspect, photocatalytic CO₂ reduction will provide us with energy-enriched compounds and help to keep our environment clean and healthy. For this purpose, various photocatalysts have been designed to obtain selective products and improve efficiency of the system. Semiconductor materials have received great attention and have showed good performances for CO₂ reduction. Titanium dioxide has been widely explored as a photocatalyst for CO₂ reduction among the semiconductors due to its suitable electronic/optical properties, availability at low cost, thermal stability, low toxicity, and high photoactivity. Inspired by natural photosynthesis, the artificial Z-scheme of photocatalyst is constructed to provide an easy method to enhance efficiency of CO₂ reduction. This review covers literature in this field, particularly the studies about the photocatalytic system, TiO₂ Z-scheme heterojunction composites, and use of transition metals for CO₂ photoreduction. Lastly, challenges and opportunities are described to open a new era in engineering and attain good performances with semiconductor materials for photocatalytic CO₂ reduction.

Switchable Regioselective 6-endo or 5-exo Radical Cyclization via Photoredox Catalysis

Controlling the regioselectivity of radical cyclizations to favor the 6-endo mode over its kinetically preferred 5-exo counterpart is difficult without introducing substrate prefunctionalization. To address this challenge, we have developed a simple method for reagent controlled regioselective radical cyclization of halogenated N-heterocycles onto pendant olefins. Radical generation occurs under mild photoredox conditions with control of the regioselectivity governed by the rate of hydrogen atom transfer (HAT). Utilizing a polarity-matched thiol-based HAT agent promotes the highly selective formation of the 5-exo cyclization product. Conversely, limiting the solubility of the HAT reagent Hantzsch ester (HEH) leads to selective formation of the thermodynamically favored 6-endo product. This occurs through an initial 5-exo cyclization, with the resulting alkyl radical intermediate undergoing neophyl rearrangement to form the 6-endo product. Development of this switchable catalysis strategy allows for two modes of divergent reactivity to form either the 6-endo or 5-exo product, generating fused N-heteroaromatic/saturated ring systems.

Design of Materials Configuration for Optimizing Redox-Based Resistive Switching Memories

Redox-based resistive random access memories (ReRAMs) are based on electrochemical processes of oxidation and reduction within the devices. The selection of materials and material combinations strongly influence the related nanoscale processes, playing a crucial role in resistive switching properties and functionalities. To date, however, comprehensive studies on device design accounting for a combination of factors such as electrodes, electrolytes, and capping layer materials related to their thicknesses and interactions are scarce. In this work, the impact of materials' configuration on interfacial redox reactions in HfO₂ -based electrochemical metallization memory (ECM) and valence-change memory (VCM) systems is reported. The redox processes are studied by cyclic voltammetry, and the corresponding resistive switching characteristics are investigated. In ECM cells, the overall cell resistance depends on the electrocatalytic activity of the counter electrode. Nonetheless, the capping layer material further influences the cell resistance and the SET and RESET voltages. In VCM systems, the influence of the electrode material configuration is also pronounced, and is capable of modulating the active resistive switching interface. For both types of memory cells, the switching behavior changes significantly with variation of the oxide thickness. The results present important materials selection criteria for rationale design of ReRAM cells for various memristive applications.

Small Molecule Regulators Targeting NAD+ Biosynthetic Enzymes

Nicotinamide adenine dinucleotide (NAD+) is a key player in many metabolic pathways as an activated carrier of electrons. In addition to being the cofactor for redox reactions, NAD+ also serves as the substrate for various enzymatic transformations such as adenylation and ADP-ribosylation. Maintaining cellular NAD+ homeostasis has been suggested as an effective anti-aging strategy. Given the importance of NAD+ in regulating a broad spectrum of cellular events, small molecules targeting NAD+ metabolism have been pursued as therapeutic interventions for the treatment of mitochondrial disorders and agerelated diseases. In this article, small molecule regulators of NAD+ biosynthetic enzymes will be reviewed. The focus will be given to the discovery and development of these molecules, the mechanism of action as well as their therapeutic potentials.

Switchable, Reagent-Controlled Diastereodivergent Photocatalytic Carbocyclisation of Imine-Derived α-Amino Radicals

A reagent‐controlled stereodivergent carbocyclisation of aryl aldimine‐derived, photocatalytically generated, α‐amino radicals possessing adjacent conjugated alkenes, affording either bicyclic or tetracyclic products, is described. Under net reductive conditions using commercial Hantzsch ester, the α‐amino radical species underwent a single stereoselective cyclisation to give trans‐configured amino‐indane structures in good yield, whereas using a substituted Hantzsch ester as a milder reductant afforded cis‐fused tetracyclic tetrahydroquinoline frameworks, resulting from two consecutive radical cyclisations. Judicious choice of the reaction conditions allowed libraries of both single and dual cyclisation products to be synthesised with high selectivity, notable predictability, and good‐to‐excellent yields. Computational analysis employing DFT revealed the reaction pathway and mechanistic rationale behind this finely balanced yet readily controlled photocatalytic system.

Chirality Affecting Reaction Dynamics of HgS Nanostructures Simultaneously Visualized in Real and Reciprocal Space

Chirality involved reactions enable to probe features in the fields of asymmetric synthesis and catalysis, which allow to gain insight into the fundamental mechanisms of topochemically controlled reactions. However, in situ observation of the chirality-associated reaction dynamics with simultaneous structural determination of microscopic features has been lacking. Here, we report the direct visualization of the electron-beam-stimulated reaction dynamics of HgS nanostructures with chiral and achiral morphologies simultaneously in both real and reciprocal space. Under the electron-beam excitation of HgS nanostructures, the formation and evaporation dynamics of Hg nanodroplets were vividly pictured, while the reciprocal space imaging revealed the structural transformation from monocrystalline to polycrystalline. Interestingly, such induced changes were size dependent, which were slowed when involving the chirality in the nanostructures. The finding offers a fundamental understanding of topochemically controlled reaction mechanisms and holds promise of tuning asymmetric synthesis for catalysis-related applications.

Mechanistic Insight into Humic Acid-Enhanced Hydroxyl Radical Production from Fe(II)-Bearing Clay Mineral Oxygenation

Hydroxyl radical (•OH) production by electron transfer from Fe(II)-bearing clay minerals to oxygen has been increasingly reported. However, the influence of ubiquitous coexisting humic acid (HA) on this process is poorly understood. Here, we investigated the effect of different HA on •OH production during the oxygenation of reduced nontronite NAu-2 (rNAu-2), montmorillonite, and sediment. Results showed that HA could enhance •OH production, and the enhancement was related to the content of reactive Fe(II) in rNAu-2 and the electron-accepting capacity of HA. Coexisting HA leads to a new electron-transfer pathway from Fe(II) in rNAu-2 to HA (instead of the HA-Fe complex) and then to O₂, changing the first step of O₂ reduction from one- to two-electron transfer process with H₂O₂ as the main intermediate. Reduced HA decomposes H₂O₂ to •OH at a higher yield (13.8%) than rNAu-2 (8.8%). Modeling results reveal that the HA-mediated electron-transfer pathway contributes to 12.6-70.2% of H₂O₂ generation and 13.2-62.1% of •OH formation from H₂O₂ decomposition, with larger contributions at higher HA concentrations (5-100 mg C/L). Our findings implicate that HA-mediated electron transfer can expand the area of •OH production from the mineral surface to the aqueous phase and increase the yield of •OH production.

A Microfluidic System for Simultaneous Raman Spectroscopy, Patch-Clamp Electrophysiology, and Live-Cell Imaging to Study Key Cellular Events of Single Living Cells in Response to Acute Hypoxia

The ability to sense changes in oxygen availability is fundamentally important for the survival of all aerobic organisms. However, cellular oxygen sensing mechanisms and pathologies remain incompletely understood and studies of acute oxygen sensing, in particular, have produced inconsistent results. Current methods cannot simultaneously measure the key cellular events in acute hypoxia (i.e., changes in redox state, electrophysiological properties, and mechanical responses) at controlled partial pressures of oxygen (pO₂ ). The lack of such a comprehensive method essentially contributes to the discrepancies in the field. A sealed microfluidic system that combines i) Raman spectroscopy, ii) patch-clamp electrophysiology, and iii) live-cell imaging under precisely controlled pO₂ have therefore been developed. Merging these modalities allows label-free and simultaneous observation of oxygen-dependent alterations in multiple cellular redox couples, membrane potential, and cellular contraction. This technique is adaptable to any cell type and allows in-depth insight into acute oxygen sensing processes underlying various physiologic and pathologic conditions.

Separation-Controlled Redox Reactions

In the era of molecular devices and nanotechnology, precise control over electron-transfer processes is strongly desired. However, redox reactions are usually characterized by reaction equilibrium constants strongly departing from unity. This leads to strong favoring of either reactants or products and does not permit subtle control of transferred charge (doping). Here we propose, based on theoretical studies for periodic systems, how charge transfer between reactants could be finely manipulated in the epitaxially grown system composed of extremely strong oxidizer, reducing agent, and an inert separator-the key factor of control.

The Energetic Potential for Undiscovered Manganese Metabolisms in Nature

Microorganisms are found in nearly every surface and near-surface environment, where they gain energy by catalyzing reactions among a wide variety of chemical compounds. The discovery of new catabolic strategies and microbial habitats can therefore be guided by determining which redox reactions can supply energy under environmentally-relevant conditions. In this study, we have explored the thermodynamic potential of redox reactions involving manganese, one of the most abundant transition metals in the Earth's crust. In particular, we have assessed the Gibbs energies of comproportionation and disproportionation reactions involving Mn²⁺ and several Mn-bearing oxide and oxyhydroxide minerals containing Mn in the +II, +III, and +IV oxidation states as a function of temperature (0-100°C) and pH (1-13). In addition, we also calculated the energetic potential of Mn²⁺ oxidation coupled to O₂, NO₂ ^-, NO₃ ^-, and FeOOH. Results show that these reactions-none of which, except O₂ + Mn²⁺, are known catabolisms-can provide energy to microorganisms, particularly at higher pH values and temperatures. Comproportionation between Mn²⁺ and pyrolusite, for example, can yield 10 s of kJ (mol Mn)^-1. Disproportionation of Mn³⁺ can yield more than 100 kJ (mol Mn)^-1 at conditions relevant to natural settings such as sediments, ferromanganese nodules and crusts, bioreactors and suboxic portions of the water column. Of the Mn²⁺ oxidation reactions, the one with nitrite as the electron acceptor is most energy yielding under most combinations of pH and temperature. We posit that several Mn redox reactions represent heretofore unknown microbial metabolisms.

Iodine Redox Chemistry in Rechargeable Batteries

Halogens have been coupled with metal anodes in a single cell to develop novel rechargeable batteries based on extrinsic redox reactions. Since the commercial introduction of lithium-iodine batteries in 1972, they have shown great potential to match the high-rate performance, large energy density, and good safety of advanced batteries. With the development of metal anodes (e.g. Li, Zn), one of the actual challenges lies in the preparation of electrochemically active and reliable iodine-based cathodes to prevent self-discharge and capacity decay of the rechargeable batteries. Understanding the fundamental reactions of iodine/polyiodide and their underlying mechanisms is still highly desirable to promote the rational design of advanced cathodes for high-performance rechargeable batteries. In this Minireview, recent advances in the development of iodine-based cathodes to fabricate rechargeable batteries are summarized, with a special focus on the basic principles of iodine redox chemistry to correlate with structure-function relationships.

Pyrogenic Carbon Initiated the Generation of Hydroxyl Radicals from the Oxidation of Sulfide

Sulfide is one of the most abundant reductants in the subsurface environment, while pyrogenic carbon is a redox medium that widely exists in sulfide environment. Previous studies have found pyrogenic carbon can mediate the reductive degradation of organic pollutants under anoxic sulfide conditions; however, the scenario under oxic sulfide conditions has rarely been reported. In this study, we found that pyrogenic carbon can mediate hydroxyl radicals (^•OH) generation from sulfide oxidation under dark oxic conditions. The accumulated ^•OH ranged from 2.07 to 101.90 μM in the presence of 5 mM Na₂S and 100 mg L^-1 pyrogenic carbon at pH 7.0 within 240 min. The Raman spectra and electrochemical cell experiments revealed that the carbon defects were the possible chemisorption sites for oxygen, while the graphite crystallites were responsible for the electron transfer from sulfide to O₂ to generate H₂O₂ and ^•OH. Quenching experiments and degradation product identification showed that As(III) and sulfanilamide can be oxidized by the generated ^•OH. This research provides a new insight into the important role of pyrogenic carbon in redox reactions and dark ^•OH production.

Effects of Fe Impurities on Self-Discharge Performance of Carbon-Based Supercapacitors

Activated carbon is widely used as an electrode material in supercapacitors due to its superior electrochemical stability, excellent electrical conductivity, and environmental friendliness. In this study, the self-discharge mechanisms of activated carbon electrodes loaded with different contents of Fe impurities (Fe and Fe₃O₄) were analyzed by multi-stage fitting to explore the tunability of self-discharge. It is was found that a small quantity of Fe impurities on carbon materials improves the self-discharge performance dominated by redox reaction, by adjusting the surface state and pore structure of carbon materials. As the content of Fe impurities increases, the voltage loss of activated carbon with the Fe impurity concentrations of 1.12 wt.% (AF-1.12) decreases by 37.9% of the original, which is attributable to the reduce of ohmic leakage and diffusion, and the increase in Faradic redox at the electrode/electrolyte interface. In summary, self-discharge performance of carbon-based supercapacitors can be adjusted via the surface state and pour structure, which provides insights for the future design of energy storage.

Advances in Electrochemical Modification Strategies of 5-Hydroxymethylfurfural

The development of electrochemical catalytic conversion of 5-hydroxymethylfurfural (HMF) has recently gained attention as a potentially scalable approach for both oxidation and reduction processes yielding value-added products. While the possibility of electrocatalytic HMF transformations has been demonstrated, this growing research area is in its initial stages. Additionally, its practical applications remain limited due to low catalytic activity and product selectivity. Understanding the catalytic processes and design of electrocatalysts are important in achieving a selective and complete conversion into the desired highly valuable products. In this Minireview, an overview of the most recent status, advances, and challenges of oxidation and reduction processes of HMF was provided. Discussion and summary of voltammetric studies and important reaction factors (e. g., catalyst type, electrode material) were included. Finally, biocatalysts (e. g., enzymes, whole cells) were introduced for HMF modification, and future opportunities to combine biocatalysts with electrochemical methods for the production of high-value chemicals from HMF were discussed.

Secondary Alcohol Dehydrogenases from Thermoanaerobacter pseudoethanolicus and Thermoanaerobacter brockii as Robust Catalysts

Alcohol dehydrogenases (ADHs) are an important type of enzyme that have significant applications as biocatalysts. Secondary ADHs from Thermoanaerobacter pseudoethanolicus (TeSADH) and Thermoanaerobacter brockii (TbSADH) are well-known as robust catalysts. However, like most other ADHs, these enzymes suffer from their high substrate specificities (i. e., limited substrate scope), which to some extent restricts their use as biocatalysts. This minireview discusses recent efforts to expand the substrate scope and tune the enantioselectivity of TeSADH and TbSADH by using site-directed mutagenesis and directed evolution. Various examples of asymmetric synthesis of optically active alcohols using both enzymes are highlighted. Moreover, the unique thermal stability and organic solvent tolerance of these enzymes is illustrated by their concurrent inclusion with other interesting reactions to synthesize optically active alcohols and amines. For instance, TeSADH has been used in quantitative non-stereoselective oxidation of alcohols to deracemize alcohols via cyclic deracemization and in the racemization of enantiopure alcohols to accomplish a bienzymatic dynamic kinetic resolution.

Network Thermodynamical Modeling of Bioelectrical Systems: A Bond Graph Approach

Interactions among biomolecules, electrons, and protons are essential to many fundamental processes sustaining life. It is therefore of interest to build mathematical models of these bioelectrical processes not only to enhance understanding but also to enable computer models to complement in vitro and in vivo experiments. Such models can never be entirely accurate; it is nevertheless important that the models are compatible with physical principles. Network Thermodynamics, as implemented with bond graphs, provide one approach to creating physically compatible mathematical models of bioelectrical systems. This is illustrated using simple models of ion channels, redox reactions, proton pumps, and electrogenic membrane transporters thus demonstrating that the approach can be used to build mathematical and computer models of a wide range of bioelectrical systems.

Linking the Electrical Conductivity and Non-Stoichiometry of Thin Film Ce1-xZrxO2-δ by a Resonant Nanobalance Approach

Bulk ceria-zirconia solid solutions (Ce_1−xZr_xO_2−δ, CZO) are highly suited for application as oxygen storage materials in automotive three-way catalytic converters (TWC) due to the high levels of achievable oxygen non-stoichiometry δ. In thin film CZO, the oxygen storage properties are expected to be further enhanced. The present study addresses this aspect. CZO thin films with 0 ≤ x ≤ 1 were investigated. A unique nano-thermogravimetric method for thin films that is based on the resonant nanobalance approach for high-temperature characterization of oxygen non-stoichiometry in CZO was implemented. The high-temperature electrical conductivity and the non-stoichiometry δ of CZO were measured under oxygen partial pressures pO₂ in the range of 10⁻²⁴–0.2 bar. Markedly enhanced reducibility and electronic conductivity of CeO₂-ZrO₂ as compared to CeO_2−δ and ZrO₂ were observed. A comparison of temperature- and pO₂-dependences of the non-stoichiometry of thin films with literature data for bulk Ce_1−xZr_xO_2−δ shows enhanced reducibility in the former. The maximum conductivity was found for Ce_0.8Zr_0.2O_2−δ, whereas Ce_0.5Zr_0.5O_2-δ showed the highest non-stoichiometry, yielding δ = 0.16 at 900 °C and pO₂ of 10⁻¹⁴ bar. The defect interactions in Ce_1−xZr_xO_2−δ are analyzed in the framework of defect models for ceria and zirconia.

Reactivity and Controlled Redox Reactions of Salt-like Intermetallic Compounds in Imidazolium-Based Ionic Liquids

Substituted imidazolium ionic liquids (ILs) were investigated for their reactivity towards Na₁₂Ge₁₇ as a model system containing redox‐sensitive Zintl cluster anions. The ILs proved widely inert for imidazolium cations with a 1,2,3‐trisubstitution at least by alkyl groups, and for the anion bis(trifluoromethylsulfonyl)azanide (TFSI). A minute conversion of Na₁₂Ge₁₇ observed on long‐time contact with such ILs was not caused by dissolution of the salt‐like compound, and did thus not provide dissolved Ge clusters. Rather, a cation exchange led to the transfer of Na⁺ ions into solution. In contrast, by using benzophenone as an oxidizer, heterogeneous redox reactions of Na₁₂Ge₁₇ were initiated, transferring a considerable part of Na⁺ into solution. At optimized conditions, an X‐ray amorphous product NaGe_6.25 was obtained, which was thermally convertible to the crystalline type‐II clathrate Na_24–δGe₁₃₆ with almost completely Na‐filled polyhedral cages, and α‐Ge. The presented method thus provides unexpected access to Na_24–δGe₁₃₆ in bulk quantities.

A Brief Review on High-Performance Capacitive Deionization Enabled by Intercalation Electrodes

Owing to the advantages of cost-effectiveness, environmental-friendliness and high desalination capacity, capacitive deionization (CDI) has emerged as an advanced desalination technique. Recently, the ions intercalation materials inspired by sodium ion batteries have been widely implemented in CDI due to their exceptional salt removal capacity. They are able to extract sodium ions from the brine through intercalation or redox reactions, instead of electrostatic forces associated with the carbonaceous electrode. As a result, the ions intercalation materials have caught the attention of the CDI research community. In this article, the recent progress in various sodium ion intercalation materials as highly-efficient CDI electrodes is summarized and reviewed. Further, an outlook on the future development of ion intercalation electrodes is proposed.

Material Design of Aqueous Redox Flow Batteries: Fundamental Challenges and Mitigation Strategies

Redox flow batteries (RFBs) are critical enablers for next-generation grid-scale energy-storage systems, due to their scalability and flexibility in decoupling power and energy. Aqueous RFBs (ARFBs) using nonflammable electrolytes are intrinsically safe. However, their development has been limited by their low energy density and high cost. Developing ARFBs with higher energy density, lower cost, and longer lifespan than the current standard is of significant interest to academic and industrial research communities. Here, a critical review of the latest progress on advanced electrolyte material designs of ARFBs is presented, including a fundamental overview of their physicochemical properties, major challenges, and design strategies. Assessment methodologies and metrics for the evaluation of RFB stability are discussed. Finally, future directions for material design to realize practical applications and achieve the commercialization of ARFB energy-storage systems are highlighted.

Electrochemistry of Electrode Materials Containing S-Se Bonds for Rechargeable Batteries

Sulfur (S) and selenium (Se) have been considered as promising high capacity cathode materials for rechargeable batteries. They have differences in their physical properties (e.g., electronic conductivity) but the same number of electrons in their outermost shells, which leads to similarity in their electrochemical behavior in batteries. In recent years, some efforts have been taken to combine them in electrodes in the hope of improved battery performance. The S-Se bonds of these electrode materials lead to unusual properties and intriguing electrochemical behavior, which have attracted increasing interest. In this Minireview, electrode materials containing S-Se bonds are summarized, including inorganic S_x Se_y solid solutions, organic compounds, and organic-inorganic hybrid materials. Our understanding in these materials is still premature, but they have shown unique properties to be electrode materials. We hope this Minireview could provide a new insight into the design, synthesis, and understanding of these materials, which could enable high energy density rechargeable batteries.

Tuning Redox State and Ionic Transfers of Mg/Fe-Layered Double Hydroxide Nanosheets by Electrochemical and Electrogravimetric Methods

Studying the electrogravimetric behavior of Mg/Fe-layered double hydroxide (LDH) nanoparticles with an electrochemical quartz crystal microbalance demonstrates its pseudocapacitance properties of mix cation and anion exchanger. The electrochemical control of the oxidation state of iron constituting the layered sheets allowed anion intercalation/deintercalation into the LDH interlayer space. Concomitantly, in agreement with the pH of zero point of net charge of the Mg/Fe-LDH, the interfacial pH increase via catalyzed hydrogen evolution reaction allows cation electroadsorption onto the external surfaces of the nanoplatelets.

Role of redox-active axial ligands of metal porphyrins adsorbed at solid-liquid interfaces in a liquid-STM setup

In a liquid-STM setup environment, the redox behavior of manganese porphyrins was studied at various solid-liquid interfaces. In the presence of a solution of Mn(III)Cl porphyrins in 1-phenyloctane, which was placed at a conductive surface, large and constant additional currents relative to a set tunneling current were observed, which varied with the magnitude of the applied bias voltage. These currents occurred regardless of the type of surface (HOPG or Au(111)) or tip material (PtIr, Au or W). The additional currents were ascribed to the occurrence of redox reactions in which chloride is oxidized to chlorine and the Mn(III) center of the porphyrin moiety is reduced to Mn(II). The resulting Mn(II) porphyrin products were identified by UV-vis analysis of the liquid phase. For solutions of Mn(III) porphyrins with non-redox active acetate instead of chloride axial ligands, the currents remained absent.

Simultaneous Piezoelectrocatalytic Hydrogen-Evolution and Degradation of Water Pollutants by Quartz Microrods@Few-Layered MoS2 Hierarchical Heterostructures

Intense light attenuation in water/wastewater results in photocatalysts exhibiting a low quantum efficiency. This study develops a novel piezoelectrocatalysis system, which involves quartz microrods (MRs) abundantly decorated with active-edge-site MoS₂ nanosheets to form a quartz microrods@few-layered MoS₂ hierarchical heterostructure (QMSH). Through theoretical calculations, it is found that the quartz MRs serve as a parallel-plate capacitor, which is self-powered to provide an internal electric field to the few-layered MoS₂ nanosheets surrounding the quartz MR surfaces, and the piezoelectric potential (piezopotential) effectively facilitates redox reactions with the free carriers in MoS₂ . The self-powered quartz MRs in the QMSH present an internal bias to the MoS₂ nanosheets, thus yielding a piezoelectrocatalysis system. An efficient piezoelectrocatalytic hydrogen evolution reaction and decomposition of wastewater without light irradiation can be achieved simultaneously. The second-order rate constant of the QMSH is ≈0.631 L mg^-1 min^-1 , which is 650-fold that of quartz MRs, indicating that the piezoelectric heterostructural catalysts display exceptionally high efficiency on piezoelectrocatalytic redox reactions rather than in the piezocatalytic process. The H₂ -production rate of QMSH catalysts approaches ≈6456 µmo1 g^-1 h^-1 and peaks at ≈16.8 mmol g^-1 in 8 h. The piezoelectrocatalytic process may be a promising method for treating industrial wastewater and producing clean energy.

Porous Metal-Organic Frameworks Containing Reversible Disulfide Linkages as Cathode Materials for Lithium-Ion Batteries

Three porous disulfide-ligand-containing metal-organic frameworks (DS-MOFs) and two nonporous coordination polymers with disulfide ligands (DS-CPs) with various structural dimensionalities were used as cathode active materials in lithium batteries. Charge/discharge performance examinations revealed that only porous DS-MOF-based batteries exhibited significant capacities close to the theoretical values, which was ascribed to the insertion of electrolyte ions into the DS-MOFs. The insolubility of porous 3 D DS-MOFs in the electrolyte resulted in cycling performances superior to that of their 1 D and 2 D porous counterparts. Battery reactions were probed by instrumental analyses. The dual redox reactions of metal ions and disulfide ligands in the MOFs resulted in higher capacities, and the presence of reversible electrochemically dynamic S-S bonds stabilized the cycling performance. Thus, the strategy of S-S moiety trapping in MOFs and the obtained correlation between the structural features and battery performance could contribute to the design of high-performance MOF-based batteries and the practical realization of Li-S batteries.