Integrating novel (thermophilic aerobic membrane reactor-TAMR) and conventional (conventional activated sludge-CAS) biological processes for the treatment of high strength aqueous wastes

Innovative hyper-thermophilic aerobic submerged membrane distillation bioreactor for wastewater reclamation

For the first time, a hyper-thermophilic aerobic (>60 °C) bioreactor has been integrated with direct submerged membrane distillation (MD), highlighting its potential as an advanced wastewater treatment solution. The hyper-thermophilic aerobic bioreactor, operating up to 65 °C, is tailored for high organic removal, while MD efficiently produces clean water. Throughout the study, high removal rates of 99.5% for organic matter, 96.4% for ammonia, and 100% for phosphorus underscored the impressive adaptability of microorganisms to challenging hyper-thermophilic conditions and a successful combination with the MD process. Despite the extreme temperatures and substantial salinity accumulation reaching up to 12,532 μS/cm, the biomass of microorganisms increased by 1.6 times over a 92-day period, representing their remarkable resilience. The distillation flux ranged from 6.15 LMH to 8.25 LMH, benefiting from the temperature gradient in the hyper-thermophilic setting and the design of the tubular submerged MD membrane module. The system also excels in pH control, utilizing fewer alkali and nutritional resources than conventional systems. Meiothermus, Firmicutes, and Bacteroidetes, the three dominant species, played a crucial role, showcasing their significance in adapting to high salinity and decomposing organic matter.

Kinetic Study for Startup of Aerobic Moving Bed Biofilm Reactor in Treatment of Textile Dye Wastewater

Due to high augmentation in population and low availability of land, the quantum of wastewater production has surged resulting in advancements in wastewater treatment systems. To cope under such stressful circumstances, moving bed biofilm reactor (MBBR) proves to be an upgraded treatment technology for industrial and municipal wastewater treatment. The present startup study has been carried out using a laboratory-scale aerobic MBBR with working volume of 25L for textile dye wastewater treatment having AnoxKaldnes K3 media at filling percentage of 50%. In order to acclimatize the microorganisms on textile dye wastewater, the startup of the reactor was carried out using lactose as readily degradable co-substrate with textile dye wastewater in different ratios at hydraulic retention time (HRT) of 24 h. The biofilm on the media was developed in 63 days duration and the reactor attained pseudo-steady state (PSS) in 185 days period. During PSS condition of the MBBR, the maximum chemical oxygen demand (COD) removal efficiency of 92% with mixed liquor suspended solids (MLSS) concentration of 4224 ± 22 mg/L has been achieved. The kinetic study for biodegradation of textile dye wastewater has also been carried out using the Monod growth kinetics. The values of bio-kinetic coefficients of yield of heterotrophic biomass (Y) and endogenous decay coefficient for heterotrophic biomass (Kd) recorded are 0.394 mgVSS/mgCOD.d and 0.087 day-1, respectively. The values of specific substrate removal rate (k), Monod half saturation constant (Ks), and maximum specific growth rate for heterotrophic biomass (µmax) are 0.024 mgCOD/mgVSS.d, 53.203 mg/L, and 0.0095 day-1, respectively, demonstrating the suitability and healthy performance of MBBR for textile dye wastewater treatment.

Occurrence and transport of SARS-CoV-2 in wastewater streams and its detection and remediation by chemical-biological methods

This paper explains the transmission of SARS-CoV and influences of several environmental factors in the transmission process. The article highlighted several methods of collection, sampling and monitoring/estimation as well as surveillance tool for detecting SARS-CoV in wastewater streams. In this context, WBE (Wastewater based epidemiology) is found to be the most effective surveillance tool. Several methods of genomic sequencing are discussed in the paper, which are applied in WBE, like qPCR-based wastewater testing, metagenomics-based analysis, next generation sequencing etc. Additionally, several types of biosensors (colorimetric biosensor, mobile phone-based biosensors, and nanomaterials-based biosensors) showed promising results in sensing SARS-CoV in wastewater. Further, this review paper outlined the gaps in assessing the factors responsible for transmission and challenges in detection and monitoring along with the remediation and disinfection methods of this virus in wastewater. Various methods of disinfection of SARS-CoV-2 in wastewater are discussed (primary, secondary, and tertiary phases) and it is found that a suite of disinfection methods can be used for complete disinfection/removal of the virus. Application of ultraviolet light, ozone and chlorine-based disinfectants are also discussed in the context of treatment methods. This study calls for continuous efforts to gather more information about the virus through continuous monitoring and analyses and to address the existing gaps and identification of the most effective tool/ strategy to prevent SARS-CoV-2 transmission. Wastewater surveillance can be very useful in effective surveillance of future pandemics and epidemics caused by viruses, especially after development of new technologies in detecting and disinfecting viral pathogens more effectively.

Sludge minimization in mainstream wastewater treatment: Mechanisms, strategies, technologies, and current development

Excess sludge production in wastewater treatment plants has become an enormous environmental issue worldwide mainly due to the increased efforts towards wastewater purification. Researchers and plant operators are looking for technological solutions to reduce sludge production through the upgrading of existing technologies and configurations or by substituting them with alternative solutions. Several strategies have been identified to reduce sludge production, including the use of biological and physical-chemical methods (or a combination of them) and novel technologies, although many have not been sufficiently tested at full-scale. To select the most suitable system for sludge reduction, understanding the reduction mechanisms, advantages, disadvantages, and the economic and environmental impact of each technology is essential. This work offers a comprehensive and critical overview of mainstream sludge reduction technologies and underlying mechanisms from laboratory to full scale, and describes potential application, configuration, and integration with conventional systems. Research needs are highlighted, and a techno-economic-environmental comparison of the existing technologies is also proposed.

Numerical Analysis of a Full-Scale Thermophilic Biological System and Investigation of Nitrate and Ammonia Fates

Thermophilic biological processes proved to be effective in aqueous waste (AW) and high-strength wastewater treatment. In this work, the monitoring of a full-scale aerobic thermophilic biological plant treating various high-strength AW in continuous mode is reported. This paper aims to: (i) provide models to help the AW utility manager in predicting the load of fed pollutants and performances, and (ii) fully investigate nitrogen transformations in biological reactor. Based on the results, the thermophilic sludge in the studied plant was able to degrade Chemical Oxygen Demand (COD) and remove nitrate nitrogen with very high efficiency (79.3% and 97.1, respectively). The monitoring was conducted following a statistical approach and searched for the possible correlations between the input parameters and the efficiency of removal of the plant. Moreover, a multivariate linear regression was carried out highlighting that the yield value of the removal of COD and nitrogen forms, apart from ammonia, was well explained (R2 = 0.9) by the linear regression against the other monitored parameters. As far as nitrification is concerned, there was, on the one hand, an increase in ammonium ions due to the hydrolysis of the organic substance that occurs in the reactor, and on the other hand, a stripping of the same ammoniacal nitrogen in the form of NH3. While nitrates were effectively removed, according to fluorescent in situ hybridization tests, sludge proved to be formed by minute flocs, where bacteria responsible for the oxidation of ammonium and nitrite seem to be unable to grow.

An Evidence-Based Survey on Full-Scale Membrane Biological Reactors: Main Technical Features and Operational Aspects

This paper presents the results of a survey on full-scale membrane biological reactors (MBRs) wastewater treatment plants (WWTPs) in Italy. Alongside the main technical characteristics of the Italian MBR plants, the opinions of the plant managers on the operational advantages and disadvantages are described. As reported by the MBR technology suppliers, approximately 290 MBR municipal or industrial WWTPs are in operation in Italy, out of which 242 were studied in this survey. Data from more than one hundred municipal WWTPs were collected; these account for a total capacity of about 2,000,000 population equivalent (PE), which corresponds to 3% of the total organic load treated by the Italian WWTPs with secondary and advanced treatment. Usually, small installations adopt the flat-sheet rather than hollow-fiber membrane configuration. The main reasons why the MBR technology has been preferred to other options are its potential to be used for increasing the treatment capacity of existing plants and its compactness. Moreover, the followed operational advantages have been highlighted: easiness to comply with the discharge limits, removal of pathogens without specific disinfection units, possibility of internal reuse of the effluent, and process automation. Membrane fouling and plant shutdown have been recorded as the most relevant troubles, the last one indeed occurring only occasionally or rarely.

How to Produce an Alternative Carbon Source for Denitrification by Treating and Drastically Reducing Biological Sewage Sludge

Minimizing the biological sewage sludge (BSS) produced by wastewater treatment plants (WWTPs) represents an increasingly difficult challenge. With this goal, tests on a semi-full scale Thermophilic Alternate Membrane Biological Reactor (ThAlMBR) were carried out for 12 months. ThAlMBR was applied both on thickened (TBSS) and digested biological sewage sludge (DBSS) with alternating aeration conditions, and emerged: (i) high COD removal yields (up to 90%), (ii) a low specific sludge production (0.02-0.05 kgVS produced/kgCODremoved), (iii) the possibility of recovery the aqueous carbon residue (permeate) in denitrification processes, replacing purchased external carbon sources. Based on the respirometric tests, an excellent biological treatability of the permeate by the mesophilic biomass was observed and the denitrification kinetics reached with the diluted permeate ((4.0 mgN-NO3-/(gVSS h)) were found comparable to those of methanol (4.4 mgN-NO3-/(gVSS h)). Moreover, thanks to the similar results obtained on TBSS and DBSS, ThAlMBR proved to be compatible with diverse sludge line points, ensuring in both cases an important sludge minimization.

Drastic reduction of sludge in wastewater treatment plants: co-digestion of sewage sludge and aqueous waste in a thermophilic membrane reactor

Sewage sludge and aqueous wastes are usually treated in separate facilities. Both may pose specific issues, mainly related to the uncertainty of the recovery/disposal route and costs, for the sludge, and to the extremely variable quantitative and qualitative properties, for the aqueous waste. In the present work, the co-digestion of thickened sludge and aqueous wastes in a Thermophilic Aerobic Membrane Reactor (TAMR) was studied in order to allow the almost complete reduction of sludge directly in wastewater treatment plants (WWTPs). Different conditions (aerobic and alternate aeration) were tested in a pilot plant, at the semi-industrial scale. The TAMR plant was operated at 48°C with constant organic load rate (5 kgCOD m^-3 d^-1) and hydraulic retention time (5 days). The main results obtained are the following: (I) high overall COD (78-97%) and total phosphorus (>60%) removal rate under both the studied aeration conditions; (II) increase of ammonia concentration due to the effective ammonification of organic nitrogen; (III) low specific sludge production (0.04[Formula: see text]) in the thermophilic reactor.

Environmental Remediation of Antineoplastic Drugs: Present Status, Challenges, and Future Directions

The global burden of cancer is on the rise, and as a result, the number of therapeutics administered for chemotherapy is increasing. The occupational exposure, recalcitrant nature and ecotoxicological toxicity of these therapeutics, referred to as antineoplastic (ANP) drugs, have raised concerns about their safe remediation. This review provides an overview of the environmental source of ANPs agents, with emphasis on the currently used remediation approaches. Outpatient excreta, hospital effluents, and waste from pharmaceutical industries are the primary source of ANP waste. The current review describes various biotic and abiotic methods used in the remediation of ANP drugs in the environment. Abiotic methods often generate transformation products (TPs) of unknown toxicity. In this light, obtaining data on the environmental toxicity of ANPs and its TPs is crucial to determine their toxic effect on the ecosystem. We also discuss the biodegradation of ANP drugs using monoculture of fungal and bacterial species, and microbial consortia in sewage treatment plants. The current review effort further explores a safe and sustainable approach for ANP waste treatment to replace existing chemical and oxidation intensive treatment approaches. To conclude, we assess the possibility of integrating biotic and abiotic methods of ANP drug degradation.

The upgrading of conventional activated sludge processes with thermophilic aerobic membrane reactor: Alternative solutions for sludge reduction

Sludge recovery/disposal represents one of the most crucial aspects related to the management of wastewater treatment plants. The most widely diffused technology for the treatment of industrial and municipal wastewaters is the conventional activated sludge (CAS) process, which is characterized by a relatively high excess sludge production. Different technical solutions are proposed in the literature for sludge minimization and they can be applied either on wastewater line (WL) or sludge line (SL). This work is focused on different approaches based on the use of Thermophilic Aerobic Membrane Reactor (TAMR): this can be added to a CAS plant, and integrated to WL or SL, yielding a significant sludge reduction. The process performance was analysed in terms of volatile solids (VS) reduction and specific sludge production. The TAMR was tested both at full-scale and pilot-scale with different feeding substrates: industrial wastewater for the full-scale plant; industrial wastewater, sludge and a mix of these for the pilot-scale plants. The results obtained are: (i) good solids removal (38-90% and 40-50% in terms of VS for sludge and mix of industrial wastewater and sludge, respectively), (ii) low specific sludge production (0.01-0.09 kg_{VSS produced} kg_{COD removed}^-1 for industrial wastewater and 0.014-0.069 kg_{VSS produced} kg_{COD removed}^-1 for mix of industrial wastewater and sludge) and (iii) a significant reduction of sludge when CAS is improved with the TAMR technology.

Valorization of agro-industry residues in the building and environmental sector: A review

Environmental pollution has become a relevant issue as the population rises and resources decrease. Reuse and recycling still have the greatest potential as they turn the waste into a new resource, representing the 'closed-loop' step of a circular economy (CE). Looking for new applications for agro-industry waste represents both an environmental issue, as its incorrect disposal is a cause of pollution, and a chance to exploit zero-cost natural wastes. The present review, with around 200 articles examined, focuses on possible reuses of these residues in (a) building construction, as additives to produce thermal and acoustic insulation panels, and (b) in water treatments, exploited for removal of pollutants. The selected materials (coconut, coffee, corn, cotton and rice) have industry production wastes with suitable applications in both sectors and huge worldwide availability; their reuse may thus represent a new resource, with an impact based on the production rate and the possible replacement of current inorganic materials. Along with possible implementation of the selected materials in the building industry and environmental engineering, a brief description of the production and supply chain are provided.

The Valorization of Ammonia in Manure Digestate by Means of Alternative Stripping Reactors

The proper recovery of resources such as nitrogen and phosphorus present in the manure from intensive livestock farming is essential in order to allow environmental sustainable zootechny especially in densely populated areas where these activities are historically prevalent. The experiences at full-scale established that the ammonia stripping allows recovery from 35% to 50% of nitrogen depending on the type of substrate treated with anaerobic digestion and on the nitrogen content/form in the digestate. This study focuses on the ammonia stripping on digestate derived from anaerobic digestion of livestock manure and corn silage. Two different full-scale plants are studied including a packed column and an air bubble reactor without filling material with the aim to reduce fouling issues due to the content of suspended solids in digestate. The main results suggest that the use of an air bubble reactor could treat digestate with high concentration of suspended solids. A deeper study based on a two-level factorial experiment highlights that the temperature is an important parameter that influences the ammonia removal yields. Thus, a proper management of available thermal energy is very important.

The Role of Nanobubbles in the Precipitation and Recovery of Organic-Phosphine-Containing Beneficiation Wastewater

Dissolved air flotation (DAF) is broadly applied in wastewater treatment, especially for the recovery of organic pollution with low concentration. However, the mechanism of interaction between nanoscale gas bubbles and nanoparticles in the process of DAF remains unclear. Here, we investigated the role of nanobubbles in the precipitation of styryl phosphoric acid (SPA)-Pb particles and recovering organic phosphine containined in beneficiation wastewater by UV-vis (ultraviolet-visible) spectra, microflotation tests, nanoparticle tracking analysis, dynamic light scattering, and atomic force microscopy measurements. As suggested from the results, nanobubbles can inhibit the crystallization of SPA-Pb precipitation, which makes the sediment flotation recovery below 20%. After the precipitation crystallization is completed, nanobubbles can flocculate precipitated particles, which can promote the flotation recovery of precipitated particles to 90%. On the basis of the results, we proposed a model to explain the different roles of nanobubbles in the process of precipitation and flotation of SPA-Pb particles. This study will be helpful to understand the interaction between nanobubbles and nanoparticles in the application of flotation.