Weak electricigens: A new avenue for bioelectrochemical research

Osmoregulation by choline-based deep eutectic solvent induces electroactivity in Bacillus subtilis biofilms

Gram-positive Bacillus subtilis is a model organism for the biotechnology industry and has recently been characterized as weakly electroactive in both planktonic cultures and biofilms. Increasing the extracellular electron transfer (EET) rate in B. subtilis biofilms will help to develop an efficient microbial electrochemical technology (MET) and improve the bioproduction of high-value metabolites under electrofermentative conditions. In our previous work, we have shown that the addition of compatible solute precursors such as choline chloride (ChCl) to the growth medium formulation increases current output and biofilm formation in B. subtilis. In this work, we utilized a low-carbon tryptone yeast extract medium with added salts to further expose B. subtilis to salt stress and observe the osmoregulatory and/or nutritional effects of a D-sorbitol/choline chloride (ChCl) (1:1 mol mol-1) deep eutectic solvents (DESs) on the electroactivity of the formed biofilm. The results show that ChCl and D-sorbitol alleviate the osmotic stress induced by the addition of NaH2PO4 and KH2PO4 salts and boost biofilm production. This is probably due to the osmoprotective effect of ChCl, a precursor of the osmoprotectant glycine betaine, and the induction of electroactive exopolymeric substances within the B. subtilis biofilm. Since high ionic strength media are commonly used in microbial biotechnology, the combination of ChCl-containing DESs and salt stress could enhance biofilm-based electrofermentation processes that bring significant benefits for biotechnological applications.

Single-Cell Phenotyping of Extracellular Electron Transfer via Microdroplet Encapsulation

Electroactive organisms contribute to metal cycling, pollutant removal, and other redox-driven environmental processes. Studying this phenomenon in high-throughput is challenging since extracellular reduction cannot easily be traced back to its cell of origin within a mixed population. Here, we describe the development of a microdroplet emulsion system to enrich EET-capable organisms. We validated our system using the model electroactive organism S. oneidensis and describe the tooling of a benchtop microfluidic system for oxygen-limited processes. We demonstrated enrichment of EET-capable phenotypes from a mixed wild-type and EET-knockout population. As a proof-of-concept application, bacteria were collected from iron sedimentation from Town Lake (Austin, TX) and subjected to microdroplet enrichment. We observed an increase in EET-capable organisms in the sorted population that was distinct when compared to a population enriched in a bulk culture more closely akin to traditional techniques for discovering EET-capable bacteria. Finally, two bacterial species, C. sakazakii and V. fessus not previously shown to be electroactive, were further cultured and characterized for their ability to reduce channel conductance in an organic electrochemical transistor (OECT) and to reduce soluble Fe(III). We characterized two bacterial species not previously shown to exhibit electrogenic behavior. Our results demonstrate the utility of a microdroplet emulsions for identifying putative EET-capable bacteria and how this technology can be leveraged in tandem with existing methods.

Electricity generation and real oily wastewater treatment by Pseudomonas citronellolis 620C in a microbial fuel cell: pyocyanin production as electron shuttle

In the present study, the potential of Pseudomonas citronellolis 620C strain was evaluated, for the first time, to generate electricity in a standard, double chamber microbial fuel cell (MFC), with oily wastewater (OW) being the fuel at 43.625 mg/L initial chemical oxygen demand (COD). Both electrochemical and physicochemical results suggested that this P. citronellolis strain utilized efficiently the OW substrate and generated electricity in the MFC setup reaching 0.05 mW/m2 maximum power. COD removal was remarkable reaching 83.6 ± 0.1%, while qualitative and quantitative gas chromatography/mass spectrometry (GC/MS) analysis of the OW total petroleum and polycyclic aromatic hydrocarbons, and fatty acids revealed high degradation capacity. It was also determined that P. citronellolis 620C produced pyocyanin as electron shuttle in the anodic MFC chamber. To the authors' best knowledge, this is the first study showing (phenazine-based) pyocyanin production from a species other than P. aeruginosa and, also, the first time that P. citronellolis 620C has been shown to produce electricity in a MFC. The production of pyocyanin, in combination with the formation of biofilm in the MFC anode, as observed with scanning electron microscopy (SEM) analysis, makes this P. citronellolis strain an attractive and promising candidate for wider MFC applications.

Enriching electroactive microorganisms from ferruginous lake waters - Mind the sulfate reducers!

Electroactive microorganisms are pivotal players in mineral transformation within redox interfaces characterized by pronounced oxygen and dissolved metal gradients. Yet, their systematic cultivation from such environments remains elusive. Here, we conducted an anodic enrichment using anoxic ferruginous waters from a post-mining lake as inoculum. Weak electrogenicity (j = ∼5 µA cm-2) depended on electroactive planktonic cells rather than anodic biofilms, with a preference for formate as electron donor. Addition of yeast extract decreased the lag phase but did not increase current densities. The enriched bacterial community varied depending on the substrate composition but mainly comprised of sulfate- and nitrate-reducing bacteria (e.g., Desulfatomaculum spp. and Stenotrophomonas spp.). A secondary enrichment strategy resulted in different bacterial communities composed of iron-reducing (e.g., Klebsiella spp.) and fermentative bacteria (e.g., Paeniclostridium spp.). Secondary electron microscopy and energy-dispersive X-ray spectroscopy results indicate the precipitation of sulfur- and iron-rich organomineral aggregates at the anode surface, presumably impeding current production. Our findings indicate that (i) anoxic waters containing geogenically derived metals can be used to enrich weak electricigens, and (ii) it is necessary to specifically inhibit sulfate reducers. Otherwise, sulfate reducers tend to dominate over EAM during cultivation, which can lead to anode passivation due to biomineralization.

Colony-Based Electrochemistry Reveals Electron Conduction Mechanisms Mediated by Cytochromes and Flavins in Shewanella oneidensis

Bacteria utilize electron conduction in their communities to drive their metabolism, which has led to the development of various environmental technologies, such as electrochemical microbial systems and anaerobic digestion. It is challenging to measure the conductivity among bacterial cells when they hardly form stable biofilms on electrodes. This makes it difficult to identify the biomolecules involved in electron conduction. In the present study, we aimed to identify c-type cytochromes involved in electron conduction in Shewanella oneidensis MR-1 and examine the molecular mechanisms. We established a colony-based bioelectronic system that quantifies bacterial electrical conductivity, without the need for biofilm formation on electrodes. This system enabled the quantification of the conductivity of gene deletion mutants that scarcely form biofilms on electrodes, demonstrating that c-type cytochromes, MtrC and OmcA, are involved in electron conduction. Furthermore, the use of colonies of gene deletion mutants demonstrated that flavins participate in electron conduction by binding to OmcA, providing insight into the electron conduction pathways at the molecular level. Furthermore, phenazine-based electron transfer in Pseudomonas aeruginosa PAO1 and flavin-based electron transfer in Bacillus subtilis 3610 were confirmed, indicating that this colony-based system can be used for various bacteria, including weak electricigens.

DIET-like and MIET-like mutualism of S. oneidensis MR-1 and metal-reducing function microflora boosts Cr(VI) reduction

Microbial treatment of Cr(VI) is an environmentally friendly and low-cost approach. However, the mechanism of mutualism and the role of interspecies electron transfer in Cr(VI) reducing microflora are unclear. Herein, we constructed an intersymbiotic microbial association flora to augment interspecies electron transfer via functionalizing electroactive Shewanella oneidensis MR-1 with metal-reducing microflora, and thus the efficiency of Cr(VI) reduction. The findings suggest that the metal-reducing active microflora could converts glucose into lactic acid and riboflavin for S. oneidensis MR-1 to act as a carbon source and electron mediator. Thus, when adding initial 25 mg/L Cr (VI), this microflora exhibited an outstanding Cr (VI) removal efficiency (100%) at 12 h and elevated Cr (III) immobilization efficiency (80%) at 60 h with the assistance of 25 mg/L Cu(II). A series of electrochemical experiments proved this remarkable removal efficiency were ascribed to the improved interspecies electron transfer efficiency through direct interspecies electron transfer and riboflavin through mediated interspecies electron transfer. Furthermore, the metagenomic analysis revealed the expression level of the electron transport pathway was promoted. Intriguing high abundance of genes participating in the bio-reduction and biotransformation of Cr(VI) was also observed in functional microflora. These outcomes give a novel strategy for enhancing the reduction and fixation of harmful heavy metals by coculturing function microflora with electrogenic microorganisms.

Optimizing electrochemically active microorganisms as a key player in the bioelectrochemical system: Identification methods and pathways to large-scale implementation

The rapid global economic growth driven by industrialization and population expansion has resulted in significant issues, including reliance on fossil fuels, energy scarcity, water crises, and environmental emissions. To address these issues, bioelectrochemical systems (BES) have emerged as a dual-purpose solution, harnessing electrochemical processes and the capabilities of electrochemically active microorganisms (EAM) to simultaneously recover energy and treat wastewater. This review examines critical performance factors in BES, including inoculum selection, pretreatment methods, electrodes, and operational conditions. Further, authors explore innovative approaches to suppress methanogens and simultaneously enhance the EAM in mixed cultures. Additionally, advanced techniques for detecting EAM are discussed. The rapid detection of EAM facilitates the selection of suitable inoculum sources and optimization of enrichment strategies in BESs. This optimization is essential for facilitating the successful scaling up of BES applications, contributing substantially to the realization of clean energy and sustainable wastewater treatment. This analysis introduces a novel viewpoint by amalgamating contemporary research on the selective enrichment of EAM in mixed cultures. It encompasses identification and detection techniques, along with methodologies tailored for the selective enrichment of EAM, geared explicitly toward upscaling applications in BES.

Electrofermentation increases concentration of poly γ-glutamic acid in Bacillus subtilis biofilms

Fluctuations in redox conditions in bioprocesses can alter the end-products, reduce their concentration, and lengthen the process time. Electrofermentation enables rapid metabolic modulation of biosynthesis and allows control of redox imbalances in biofilm-based fermentation processes. In this study, electrofermentation is used to boost the production of the bacterial biopolymer poly-γ-glutamic acid (γ-PGA) from Bacillus subtilis ATCC 6051. When compared to control experiments (3.3 ± 0.99 g L-1 ), the application of an electrode potential E = 0.4 V versus Ag/AgCl results in a more than two-fold increase in the production of γ-PGA (9.13 ± 1.4 g L-1 ). Using an engineered B. subtilis strain, in which γ-PGA production is driven by isopropyl β-d-1-thiogalactopyranoside, electrofermentation improves polymer concentrations from 15.4 ± 1.5 to 23.1 ± 1.6 versus g L-1 . These results confirm that electrofermentation conditions can be adopted to increase the concentration of γ-PGA and perhaps other extracellular biopolymers in industrial strains.

A comprehensive review of microbial fuel cells considering materials, methods, structures, and microorganisms

Microbial fuel cells (MFCs) are promising for generating renewable energy from organic matter and efficient wastewater treatment. Ensuring their practical viability requires meticulous optimization and precise design. Among the critical components of MFCs, the membrane separator plays a pivotal role in segregating the anode and cathode chambers. Recent investigations have shed light on the potential benefits of membrane-less MFCs in enhancing power generation. However, it is crucial to recognize that such configurations can adversely impact the electrocatalytic activity of anode microorganisms due to increased substrate and oxygen penetration, leading to decreased coulombic efficiency. Therefore, when selecting a membrane for MFCs, it is essential to consider key factors such as internal resistance, substrate loss, biofouling, and oxygen diffusion. Addressing these considerations carefully allows researchers to advance the performance and efficiency of MFCs, facilitating their practical application in sustainable energy production and wastewater treatment. Accelerated substrate penetration could also lead to cathode clogging and bacterial inactivation, reducing the MFC's efficiency. Overall, the design and optimization of MFCs, including the selection and use of membranes, are vital for their practical application in renewable energy generation and wastewater treatment. Further research is necessary to overcome the challenges of MFCs without a membrane and to develop improved membrane materials for MFCs. This review article aims to compile comprehensive information about all constituents of the microbial fuel cell, providing practical insights for researchers examining various variables in microbial fuel cell research.

Microbial electricity-driven anaerobic phenol degradation in bioelectrochemical systems

Microbial electrochemical technologies have been extensively employed for phenol removal. Yet, previous research has yielded inconsistent results, leaving uncertainties regarding the feasibility of phenol degradation under strictly anaerobic conditions using anodes as sole terminal electron acceptors. In this study, we employed high-performance liquid chromatography and gas chromatography-mass spectrometry to investigate the anaerobic phenol degradation pathway. Our findings provide robust evidence for the purely anaerobic degradation of phenol, as we identified benzoic acid, 4-hydroxybenzoic acid, glutaric acid, and other metabolites of this pathway. Notably, no typical intermediates of the aerobic phenol degradation pathway were detected. One-chamber reactors (+0.4 V vs. SHE) exhibited a phenol removal rate of 3.5 ± 0.2 mg L-1 d-1, while two-chamber reactors showed 3.6 ± 0.1 and 2.6 ± 0.9 mg L-1 d-1 at anode potentials of +0.4 and + 0.2 V, respectively. Our results also suggest that the reactor configuration certainly influenced the microbial community, presumably leading to different ratios of phenol consumers and microorganisms feeding on degradation products.

Lactiplantibacillus plantarum uses ecologically relevant, exogenous quinones for extracellular electron transfer

IMPORTANCE

While quinones are essential for respiratory microorganisms, their importance for microbes that rely on fermentation metabolism is not understood. This gap in knowledge hinders our understanding of anaerobic microbial habitats, such in mammalian digestive tracts and fermented foods. We show that Lactiplantibacillus plantarum, a model fermentative lactic acid bacteria species abundant in human, animal, and insect microbiomes and fermented foods, uses multiple exogenous, environmental quinones as electron shuttles for a hybrid metabolism involving EET. Interestingly, quinones both stimulate this metabolism as well as cause oxidative stress when extracellular electron acceptors are absent. We also found that quinone-producing, lactic acid bacteria species commonly enriched together with L. plantarum in food fermentations accelerate L. plantarum growth and medium acidification through a mainly quinone- and EET-dependent mechanism. Thus, our work provides evidence of quinone cross-feeding as a key ecological feature of anaerobic microbial habitats.

Mechanism and application of modified bioelectrochemical system anodes made of carbon nanomaterial for the removal of heavy metals from soil

Bioelectrochemical techniques are quick, efficient, and sustainable alternatives for treating heavy metal soils. The use of carbon nanomaterials in combination with electroactive microorganisms can create a conductive network that mediates long-distance electron transfer in an electrode system, thereby resolving the issue of low electron transfer efficiency in soil remediation. As a multifunctional soil heavy metal remediation technology, its application in organic remediation has matured, and numerous studies have demonstrated its potential for soil heavy metal remediation. This is a ground-breaking method for remediating soils polluted with high concentrations of heavy metals using soil microbial electrochemistry. This review summarizes the use of bioelectrochemical systems with modified anode materials for the remediation of soils with high heavy metal concentrations by discussing the mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems, focusing on the suitability of carbon nanomaterials and acidophilic bacteria. Finally, we discuss the emerging limitations of bioelectrochemical systems, and future research efforts to improve their performance and facilitate practical applications. The mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems emphasizes the suitability of carbon nanomaterials and acidophilic bacteria for remediating soils polluted with high concentrations of heavy metals. We conclude by discussing present and future research initiatives for bioelectrochemical systems to enhance their performance and facilitate practical applications. As a result, this study can close any gaps in the development of bioelectrochemical systems and guide their practical application in remediating heavy-metal-contaminated soils.

Autoinducer-2 quorum sensing regulates biofilm formation and chain elongation metabolic pathways to enhance caproate synthesis in microbial electrochemical system

Quorum sensing (QS) have been explored extensively. However, most studies focused on N-acyl homoserine lactones (AHLs) participating in intraspecies QS. In this study, autoinducer-2 (AI-2, participating in interspecies QS) with different concentration was investigated for chain elongation in microbial electrosynthesis (MES). The results demonstrated that the R3 treatment, which involved adding 10 μM of 4,5-dihydroxy-2,3-pentanedione (DPD) in the reactor, exhibited the best performance. The concentration of caproate was increased by 66.88% and the redox activity of cathodic electroactive biofilms (EABs) was enhanced. Meanwhile, microbial community data indicated that Negativicutes relative abundance was increased obviously in R3 treatment. In this study, the transcriptome Kyoto Encyclopedia of Genes and Genomes (KEGG) and Gene Ontology (GO) databases were used to analyze the metabolic pathway of chain elongation involving fatty acid biosynthesis (FAB) pathway and reverse β-oxidization (RBO) pathway. KEGG analysis revealed that fatty acid elongation metabolism (p < 0.001), tryptophan metabolism (p < 0.01), arginine and proline metabolism (p < 0.05) were significantly improved in R3 treatment. GO analysis suggested that R3 treatment mainly upregulated significantly transmembrane signaling receptor activity (p < 0.01), oxidoreductase activity (p < 0.05), and phosphorelay signal transduction (p < 0.05). Moreover, metatranscriptomic analyses also showed that R3 treatment could upregulate the LuxP extracellular receptor, LuxO transcriptional activator, LsrB periplasmic protein, and were beneficial to both FAB and RBO pathways. These findings provided a new insight into chain elongation in MES system.

A Weak Electricigen-Based Bioelectrochemical Sensor for Real-Time Monitoring of Chemical Pollutants in Water

Electroactive microorganisms are now understood to be abundant across nature, though many are categorized as "weak electricigens" not suitable for reasonable power generation. We report the use of weak electricigens from the natural environment for rapid, real-time water quality monitoring. Using a variety of pesticides as model chemical pollutants, the bioelectrochemical sensor was responsive within minutes at all concentrations tested (0.05-2 ppm) and could be repreatedly used long-term. Due to the prevalence of electroactive microorganisms in the natural environment, such sensors could work in tandem with conventional monitoring methods and may be useful for detecting emerging contaminants.

Fe(III) oxide microparticles modulate extracellular electron transfer in anodic biofilms dominated by bacteria of the Pelobacter genus

Exo-electrogenic microorganisms have been extensively studied for their ability to transfer electrons with solid surfaces using a large variety of metabolic pathways. Most of the studies on these microorganisms consist in the replacement of solid electron acceptors such as Fe(III) oxides found in nature by electrodes with the objective of generating harvestable current in devices such as microbial fuel cells. In this study we show how the presence of solid ferric oxide (Fe₂O₃) particles in the inoculum during bio-anode development influences extracellular electron transfer to the electrode. Amplification and sequencing of the 16S rRNA (V4-V5 region) show bacteria and archaea communities with a large predominance of the Pelobacter genus, which is known to be phylogenetically close to the Geobacter genus, regardless of the presence or absence of ferric oxide in the inoculum. Data indicate that the bacteria at the bio-anode surface can preferentially utilize solid ferric oxide as terminal electron acceptors instead of the anode, though extracellular electron transfer to the anode can be restored by removing the particles. Mixed inoculum commonly used to develop bioanodes may produce similar bacterial communities with divergent electrochemical responses due to the presence of alternate electron acceptors, with direct implications for microbial fuel cell performance.

Microbe-Anode Interactions: Comparing the impact of genetic and material engineering approaches to improve the performance of microbial electrochemical systems (MES)

Microbial electrochemical systems (MESs) are a highly versatile platform technology with a particular focus on power or energy production. Often, they are used in combination with substrate conversion (e.g., wastewater treatment) and production of value-added compounds via electrode-assisted fermentation. This rapidly evolving field has seen great improvements both technically and biologically, but this interdisciplinarity sometimes hampers overseeing strategies to increase process efficiency. In this review, we first briefly summarize the terminology of the technology and outline the biological background that is essential for understanding and thus improving MES technology. Thereafter, recent research on improvements at the biofilm-electrode interface will be summarized and discussed, distinguishing between biotic and abiotic approaches. The two approaches are then compared, and resulting future directions are discussed. This mini-review therefore provides basic knowledge of MES technology and the underlying microbiology in general and reviews recent improvements at the bacteria-electrode interface.

Industrial bioelectrochemistry for waste valorization: State of the art and challenges

Bioelectrochemistry has gained importance in recent years for some of its applications on waste valorization, such as wastewater treatment and carbon dioxide conversion, among others. The aim of this review is to provide an updated overview of the applications of bioelectrochemical systems (BESs) for waste valorization in the industry, identifying current limitations and future perspectives of this technology. BESs are classified according to biorefinery concepts into three different categories: (i) waste to power, (ii) waste to fuel and (iii) waste to chemicals. The main issues related to the scalability of bioelectrochemical systems are discussed, such as electrode construction, the addition of redox mediators and the design parameters of the cells. Among the existing BESs, microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) stand out as the more advanced technologies in terms of implementation and R&D investment. However, there has been little transfer of such achievements to enzymatic electrochemical systems. It is necessary that enzymatic systems learn from the knowledge reached with MFC and MEC to accelerate their development to achieve competitiveness in the short term.

Putting the electro-bugs to work: A systematic review of 22 years of advances in bio-electrochemical systems and the parameters governing their performance

Wastewater treatment using bioelectrochemical systems (BESs) can be considered as a technology finding application in versatile areas such as for renewable energy production and simultaneous reducing environmental problems, biosensors, and bioelectrosynthesis. This review paper reports and critically discusses the challenges, and advances in bio-electrochemical studies in the 21st century. To sum and critically analyze the strides of the last 20+ years on the topic, this study first provides a comprehensive analysis on the structure, performance, and application of BESs, which include Microbial Fuel Cells (MFCs), Microbial Electrolysis Cells (MECs) and Microbial Desalination Cells (MDCs). We focus on the effect of various parameters, such as electroactive microbial community structure, electrode material, configuration of bioreactors, anode unit volume, membrane type, initial COD, co-substrates and the nature of the input wastewater in treatment process and the amount of energy and fuel production, with the purpose of showcasing the modes of operation as a guide for future studies. The results of this review show that the BES have great potential in reducing environmental pollution, purifying saltwater, and producing energy and fuel. At a larger scale, it aspires to facilitate the path of achieving sustainable development and practical application of BES in real-world scenarios.

A New Electron Shuttling Pathway Mediated by Lipophilic Phenoxazine via the Interaction with Periplasmic and Inner Membrane Proteins of Shewanella oneidensis MR-1

Although it has been established that electron mediators substantially promote extracellular electron transfer (EET), electron shuttling pathways are not fully understood. Here, a new electron shuttling pathway was found in the EET process by Shewanella oneidensis MR-1 with resazurin, a lipophilic electron mediator. With resazurin, the genes encoding outer-membrane cytochromes (mtrCBA and omcA) were downregulated. Although cytochrome deletion substantially reduced biocurrent generation to 1-12% of that of wild-type (WT) cells, the presence of resazurin restored biocurrent generation to 168 μA·cm^-2 (ΔmtrA/omcA/mtrC), nearly equivalent to that of WT cells (194 μA·cm^-2), indicating that resazurin-mediated electron transfer was not dependent on the Mtr pathway. Biocurrent generation by resazurin was much lower in ΔcymA and ΔmtrA/omcA/mtrC/fccA/cctA mutants (4 and 6 μA·cm^-2) than in WT cells, indicating a key role of FccA, CctA, and CymA in this process. The effectiveness of resazurin in EET of Mtr cytochrome mutants is also supported by cyclic voltammetry, resazurin reduction kinetics, and in situ c-type cytochrome spectroscopy results. The findings demonstrated that low molecular weight, lipophilic electron acceptors, such as phenoxazine and phenazine, may facilitate electron transfer directly from periplasmic and inner membrane proteins, thus providing new insight into the roles of exogenous electron mediators in electron shuttling in natural and engineered biogeochemical systems.

Clostridium kluyveri enhances caproate production by synergistically cooperating with acetogens in mixed microbial community of electro-fermentation system

As a chain elongation (CE) model strain, Clostridium kluyveri has been used in the studies of bioaugmentation of caproate production. However, its application in the novel electro-fermentation CE system for bioaugmentation is still unclear. In this study, the CE performances, with or without bioaugmentation and in conventional or electro-fermentation systems were compared. And the mechanism of electrochemical-bioaugmentation by constructing a co-culture of Acetobacterium woodii and Clostridium kluyveri were further verified. Results demonstrated that the bioaugmentation treatments have better CE performance, especially in electro-fermentation system, with a highest caproate concentration of 4.68 g·L^-1. Mechanism analysis revealed that C. kluyveri responded to the electric field and emerged synergy with the acetogens, which was proved by the increases of C. kluyveri colonization and the acetogens abundance in biofilm and supported by the co-culture experiment. This study provides a novel insight of microbial synergy mechanism of C. kluyveri during CE bioaugmentation in electro-fermentation system.

Electrochemical Characteristics of Shewanella loihica PV-4 on Reticulated Vitreous Carbon (RVC) with Different Potentials Applied

The current output of an anodic bioelectrochemical system (BES) depends upon the extracellular electron transfer (EET) rate from electricigens to the electrodes. Thus, investigation of EET mechanisms between electricigens and solid electrodes is essential. Here, reticulated vitreous carbon (RVC) electrodes are used to increase the surface available for biofilm formation of the known electricigen Shewanella loihica PV-4, which is limited in conventional flat electrodes. S. loihica PV-4 utilizes flavin-mediated EET at potential lower than the outer membrane cytochromes (OMC), while at higher potential, both direct electron transfer (DET) and mediated electron transfer (MET) contribute to the current output. Results show that high electrode potential favors cell attachment on RVC, which enhances the current output. DET is the prevailing mechanism in early biofilm, while the contribution of MET to current output increased as the biofilm matured. Electrochemical analysis under starvation shows that the mediators could be confined in the biofilm. The morphology of biofilm shows bacteria distributed on the top layer of honeycomb structures, preferentially on the flat areas. This study provides insights into the EET pathways of S. loihica PV-4 on porous RVC electrodes at different biofilm ages and different set potential, which is important for the design of real-world BES.

Assessment of physiological and electrochemical effects of a repurposed zinc dithiocarbamate complex on Acinetobacter baumannii biofilms

Acinetobacter baumannii is an infectious agent of global proportion and concern, partly due to its proficiency in development of antibiotic resistance phenotypes and biofilm formation. Dithiocarbamates (DTC) have been identified as possible alternatives to the current antimicrobials. We report here the evaluation of several DTC-metal complexes against A. baumannii planktonic cells and biofilms. Among the DTC-metal complexes and DTCs tested, ZnL1 (N-methyl-1-phenyldithiocarbamato-S,S' Zn(II)), originally designed as an antitumor agent, is effective against biofilm forming A. baumannii. A MIC value of 12.5 µM, comparable to that of Gentamicin (5 µM) was measured for planktonic cells in tryptic soy broth. Spectroscopy, microscopy and biochemical analyses reveal cell membrane degradation and leakage after treatment with ZnL1. Bioelectrochemical analyses show that ZnL1 reduces biofilm formation and decreases extracellular respiration of pre-formed biofilms, as corroborated by microscopic analyses. Due to the affinity of Zn to cells and the metal chelating nature of L1 ligand, we hypothesize ZnL1 could alter metalloprotein functions in the membranes of A. baumannii cells, leading to altered redox balance. Results indicate that the DTC-Zn metal complex is an effective antimicrobial agent against early A. baumannii biofilms under laboratory conditions.

Electroactivity of weak electricigen Bacillus subtilis biofilms in solution containing deep eutectic solvent components

Bacillus subtilis is a Gram-positive, spore-forming bacterium with a versatile and adaptable metabolism, which makes it a viable cell factory for microbial production. Electroactivity has recently been identified as a cellular characteristic linked with the metabolic activity of B. subtilis. The enhancement of B. subtilis electroactivity can positively enhance bioproduction of high-added value metabolites under electrofermentative conditions. Here, we explored the use of deep eutectic solvents (DESs) and DES components as biocompatible nutrient additives for enhancing electroactivity of B. subtilis. The strongest electroactivity was obtained in an aqueous choline chloride: glycerol (1:2 mol mol^-1) eutectic mixture. At low concentration (50-500 mM), this mixture induced a pseudo-diauxic increase in planktonic growth and increased biofilm formation, likely due to a nutritional and osmoprotectant effect. Similarities in electroactivity enhancements of choline chloride-based eutectic mixtures and quinone redox metabolism in B. subtilis were detected using high performance liquid chromatography and differential pulse voltammetry. Results show that choline chloride-based aqueous eutectic mixtures can enhance biomass and productivity in biofilm-based electrofermentation. However, the specific mechanism needs to be fully elucidated.

Evaluation of extracellular electron transfer in Pseudomonas aeruginosa by co-expression of intermediate genes in NAD synthetase production pathway

Pseudomonas aeruginosa (PA) is an electrogenic bacterium, in which extracellular electron transfer (EET) is mediated by microbially-produced phenazines, especially pyocyanin. Increasing EET rate in electrogenic bacteria is key for the development of biosensors and bioelectrofermentation processes. In this work, the production of pyocyanin, Nicotinamide Adenine Dinucleotide (NAD) and NAD synthetase by the electrogenic strain PA-A4 is determined using a Microbial Fuel Cell (MFC). Effects of metabolic inhibition and enhancement of pyocyanin and NAD synthetase on NAD/NADH levels and electrogenicity was demonstrated by short chronoamperometry measurements (0-48 h). Combined overexpression of two intermediate NAD synthetase production genes-nicotinic acid mononucleotide adenyltransferase (nadD) and quinolic acid phosphoribosyltransferase (nadC) genes, which are distant on the PA genomic map, enabled co-transcription and increased NAD synthetase activity. The resulting PA-A4 nadD + nadC shows increases in pyocyanin concentration, NAD synthetase activity, NAD/NADH levels, and MFC potential, all significantly higher than its wild type. Extracellular respiratory mechanisms in PA are linked with NAD metabolism, and targeted increased yield of NAD could directly lead to enhanced EET. A previous attempt at enhancing NAD synthetase for electrogenicity by targeting the terminal NAD synthetase gene (nadE) in standard P. aeruginosa PA01 had earlier been reported. Our work however, poses another route to electrogenicity enhancement in PA using; a combination of nadD and nadC. Further experiments are needed to understand specific intracellular mechanisms governing how over-expression of nadD and nadC induced activity of NadE protein. These findings significantly advance the knowledge of the versatility of NAD biosynthetic genes in PA electrogenicity.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

Microbial Fuel Cell Based on Nitrogen-Fixing Rhizobium anhuiense Bacteria

In this study, the nitrogen-fixing, Gram-negative soil bacteria Rhizobium anhuiense was successfully utilized as the main biocatalyst in a bacteria-based microbial fuel cell (MFC) device. This research investigates the double-chambered, H-type R. anhuiense-based MFC that was operated in modified Norris medium (pH = 7) under ambient conditions using potassium ferricyanide as an electron acceptor in the cathodic compartment. The designed MFC exhibited an open-circuit voltage (OCV) of 635 mV and a power output of 1.07 mW m^-2 with its maximum power registered at 245 mV. These values were further enhanced by re-feeding the anode bath with 25 mM glucose, which has been utilized herein as the main carbon source. This substrate addition led to better performance of the constructed MFC with a power output of 2.59 mW m^-2 estimated at an operating voltage of 281 mV. The R. anhuiense-based MFC was further developed by improving the charge transfer through the bacterial cell membrane by applying 2-methyl-1,4-naphthoquinone (menadione, MD) as a soluble redox mediator. The MD-mediated MFC device showed better performance, resulting in a slightly higher OCV value of 683 mV and an almost five-fold increase in power density to 4.93 mW cm^-2. The influence of different concentrations of MD on the viability of R. anhuiense bacteria was investigated by estimating the optical density at 600 nm (OD₆₀₀) and comparing the obtained results with the control aliquot. The results show that lower concentrations of MD, ranging from 1 to 10 μM, can be successfully used in an anode compartment in which R. anhuiense bacteria cells remain viable and act as a main biocatalyst for MFC applications.

Rapid differentiation of antibiotic-susceptible and -resistant bacteria through mediated extracellular electron transfer

Conventional methods for testing antibiotic susceptibility rely on bacterial growth on agar plates (diffusion assays) or in liquid culture (microdilution assays). These time-consuming assays use population growth as a proxy for cellular respiration. Herein we propose to use mediated extracellular electron transfer as a rapid and direct method to classify antibiotic-susceptible and -resistant bacteria. We tested antibiotics with diverse mechanisms of action (ciprofloxacin, imipenem, oxacillin, or tobramycin) with four important nosocomial pathogens (Acinetobacter baumannii, Staphylococcus aureus, Escherichia coli, and Klebsiella pneumoniae) by adding the bacterial culture to a custom-designed electrochemical cell with a glassy-carbon electrode and growth media supplemented with a soluble electron transfer mediator, phenazine methosulfate (PMS). During cell respiration, liberated electrons reduce PMS, which is then oxidized on the electrode surface, and current is recorded. Using this novel approach, we were able to consistently classify strains as antibiotic-resistant or -susceptible in <90 min for methodology development and <150 min for blinded tests.

Electrografted anthraquinone to monitor pH at the biofilm-anode interface in a wastewater microbial fuel cell

Electrografted anthraquinone on graphite was used as a probe to monitor the pH change at the biofilm-electrode interface at the anode of a microbial fuel cell inoculated with wastewater. The grafting procedure was optimized so that the pH-dependent electrochemical response of the grafted quinone did not overlay with that of the electroactive biofilm. The variation of the formal potential of the grafted quinone as a function of pH was linear over the pH range 1-10 with a slope of - 64 mV. This allowed to monitor the interfacial pH change over three weeks of biofilm colonization of the electrode. During that time the interfacial pH decreased from neutrality to 5.3 while the anolyte only acidified down to pH 6.2. This finding is relevant as local pH change usually leads to alterations of the bioenergetics process of microbial communities and hence on the performance of bioelectrochemical devices.

Current Progress of Interfacing Organic Semiconducting Materials with Bacteria

Microbial bioelectronics require interfacing microorganisms with electrodes. The resulting abiotic/biotic platforms provide the basis of a range of technologies, including energy conversion and diagnostic assays. Organic semiconductors (OSCs) provide a unique strategy to modulate the interfaces between microbial systems and external electrodes, thereby improving the performance of these incipient technologies. In this review, we explore recent progress in the field on how OSCs, and related materials capable of charge transport, are being used within the context of microbial systems, and more specifically bacteria. We begin by examining the electrochemical communication modes in bacteria and the biological basis for charge transport. Different types of synthetic organic materials that have been designed and synthesized for interfacing and interrogating bacteria are discussed next, followed by the most commonly used characterization techniques for evaluating transport in microbial, synthetic, and hybrid systems. A range of applications is subsequently examined, including biological sensors and energy conversion systems. The review concludes by summarizing what has been accomplished so far and suggests future design approaches for OSC bioelectronics materials and technologies that hybridize characteristic properties of microbial and OSC systems.

Capturing the signal of weak electricigens: a worthy endeavour

Recently several non-traditional electroactive microorganisms have been discovered. These can be considered weak electricigens; microorganisms that typically rely on soluble electron acceptors and donors in their lifecycle but are also capable of extracellular electron transfer (EET), resulting in either a low, unreliable, or otherwise unexpected current. These unanticipated electroactive microorganisms represent a new chapter in electromicrobiology and have important medical, environmental, and biotechnological relevance. As such, it is essential to continue the momentum of their discovery. However, their study poses unique challenges due to their low current output. Capturing their signal necessitates novel approaches including unconventional electrode choice, the use of sensitive electrochemical techniques, and modifications of conventional experiments that use bioelectrochemical systems (BES).

High throughput techniques for the rapid identification of electroactive microorganisms

Electroactive microorganisms (EAM), capable of executing extracellular electron transfer (EET) in/out of a cell, are employed in microbial electrochemical technologies (MET) and bioelectronics for harnessing electricity from wastewater, bioremediation and as biosensors. Thus, investigation on EAM is becoming a topic of interest for multidisciplinary areas, such as environmental science, energy and health sectors. Though, EAM are widespread in three domains of life, nevertheless, only a few hundred EAM have been identified so far and hence, the rapid identification of EAM is imperative. In this review, the techniques that are developed for the direct identification of EAM, such as azo dye and WO₃ based techniques, dielectrophoresis, potentiostatic/galvanometric techniques, and other indirect methods, such as spectroscopy and molecular biology techniques, are highlighted with a special focus on time required for the detection of these EAM. The bottlenecks for identifying EAM and the knowledge gaps based on the present investigations are also discussed. Thus, this review is intended to encourage researchers for devolving high-throughput techniques for identifying EAM with more accuracy, while consuming less time.

Marinobacter atlanticus electrode biofilms differentially regulate gene expression depending on electrode potential and lifestyle

Marinobacter spp. are opportunitrophs with a broad metabolic range including interactions with metals and electrodes. Marinobacter atlanticus strain CP1 was previously isolated from a cathode biofilm microbial community enriched from a sediment microbial fuel cell. Like other Marinobacter spp., M. atlanticus generates small amounts of electrical current when grown as a biofilm on an electrode, which is enhanced by the addition of redox mediators. However, the molecular mechanism resulting in extracellular electron transfer is unknown. Here, RNA-sequencing was used to determine changes in gene expression in electrode-attached and planktonic cells of M. atlanticus when grown at electrode potentials that enable current production (310 and 510 mV vs. SHE) compared to a potential that enables electron uptake (160 mV). Cells grown at current-producing potentials had increased expression of genes for molybdate transport, regardless of planktonic or attached lifestyle. Electrode-attached cells at current-producing potentials showed increased expression of the major export protein for the type VI secretion system. Growth at 160 mV resulted in an increase in expression of genes related to stress response and DNA repair including both RecBCD and the LexA/RecA regulatory network, as well as genes for copper homeostasis. Changes in expression of proteins with PEP C-terminal extracellular export motifs suggests that M. atlanticus is remodeling the biofilm matrix in response to electrode potential. These results improve our understanding of the physiological adaptations required for M. atlanticus growth on electrodes, and suggest a role for metal acquisition, either as a requirement for metal cofactors of redox proteins or as a possible electron shuttling mechanism.

Microbial fuel cells: a comprehensive review for beginners

Microbial fuel cells (MFCs) have shown immense potential as a one-stop solution for three major sustainability issues confronting the world today-energy security, global warming and wastewater management. MFCs represent a cross-disciplinary platform for research at the confluence of the natural and engineering sciences. The diversity of variables influencing performance of MFCs has garnered research interest across varied scientific disciplines since the beginning of this century. The increasing number of research publications has made it necessary to keep track of work being carried out by research groups across the globe and consolidate significant findings on a regular basis. Review articles are often the nodal points for beginners who are required to undertake an exploratory survey of literature to identify a suitable research problem. This 'review of reviews' is a ready-reckoner that directs readers to relevant reviews and research articles reporting significant developments in MFC research in the last two decades. The article also highlights the areas needing research attention which when addressed could take this technology a few more steps closer to practical implementation.

Pathogens electrogenicity as a tool for in-situ metabolic activity monitoring and drug assessment in biofilms

Concerns regarding increased antibiotic resistance arising from the emergent properties of biofilms have spurred interest in the discovery of novel antibiotic agents and techniques to directly estimate metabolic activity in biofilms. Although a number of methods have been developed to quantify biofilm formation, real-time quantitative assessment of metabolic activity in label-free biofilms remains a challenge. Production of electrical current via extracellular electron transport (EET) has recently been found in pathogens and appears to correlate with their metabolic activity. Accordingly, monitoring the production of electrical currents as an indicator of cellular metabolic activity in biofilms represents a new direction for research aiming to assess and screen the effects of antimicrobials on biofilm activity. In this article, we reviewed EET-capable pathogens and the methods to monitor biofilm activity to discuss advantages of using the capability of pathogens to produce electrical currents and effective combination of these methods. Moreover, we discussed EET mechanisms by pathogenic and environmental bacteria and open questions for the physiological roles of EET in pathogen's biofilm. The present limitations and possible future directions of in situ biofilm metabolic activity assessment for large-scale screening of antimicrobials are also discussed.

Genome-scale mutant fitness reveals versatile c-type cytochromes in Shewanella oneidensis MR-1

Shewanella has been widely investigated for its metabolic versatility and use of a large number of extracellular electron acceptors. Many c-type cytochromes are responsible for this diversity, mainly in condition-specific fashions. By using genome-scale mutant fitness data, we studied which genes (particularly c-type cytochromes) were used to coordinate various electron transfer processes in the present work. First, by integrating fitness profiles with protein-protein interaction (PPI) networks, we showed that the genes with a high total fitness value were generally more important in PPI networks than those with low fitness values. Then, we identified genes that are important across many experiments, and further fitness analysis confirmed five versatile c-type cytochromes: ScyA (SO0264), PetC (SO0610), CcoP (SO2361), CcoO (SO2363) and CytcB (SO4666), which are considered to be crucial in most experimental conditions. Finally, we demonstrated a mediating role in the periplasm for the less-reported CytcB by combining protein structure, subcellular localization and disordered region analysis. Comparative genome analysis further revealed that it is distinctive in Shewanella species. Collectively, these results suggest that periplasmic electron transfer processes are more diverse and flexible than previously reported, giving insight for further experimental studies of Shewanella oneidensis MR-1.

Electroactivity across the cell wall of Gram-positive bacteria

The growing interest on sustainable biotechnological processes for the production of energy and industrial relevant organic compounds have increased the discovery of electroactive organisms (i.e. organisms that are able to exchange electrons with an electrode) and the characterization of their extracellular electron transfer mechanisms. While most of the knowledge on extracellular electron transfer processes came from studies on Gram-negative bacteria, less is known about the processes performed by Gram-positive bacteria. In contrast to Gram-negative bacteria, Gram-positive bacteria lack an outer-membrane and contain a thick cell wall, which were thought to prevent extracellular electron transfer. However, in the last decade, an increased number of Gram-positive bacteria have been found to perform extracellular electron transfer, and exchange electrons with an electrode. In this mini-review the current knowledge on the extracellular electron transfer processes performed by Gram-positive bacteria is introduced, emphasising their electroactive role in bioelectrochemical systems. Also, the existent information of the molecular processes by which these bacteria exchange electrons with an electrode is highlighted. This understanding is fundamental to advance the implementation of these organisms in sustainable biotechnological processes, either through modification of the systems or through genetic engineering, where the organisms can be optimized to become better catalysts.

Enhancing methane oxidation in a bioelectrochemical membrane reactor using a soluble electron mediator

BACKGROUND

Bioelectrochemical methane oxidation catalysed by anaerobic methanotrophic archaea (ANME) is constrained by limited methane bioavailability as well as by slow kinetics of extracellular electron transfer (EET) of ANME. In this study, we tested a combination of two strategies to improve the performance of methane-driven bioelectrochemical systems that includes (1) the use of hollow fibre membranes (HFMs) for efficient methane delivery to the ANME organisms and (2) the amendment of ferricyanide, an effective soluble redox mediator, to the liquid medium to enable electrochemical bridging between the ANME organisms and the anode, as well as to promote EET kinetics of ANME.

RESULTS

The combined use of HFMs and the soluble mediator increased the performance of ANME-based bioelectrochemical methane oxidation, enabling the delivery of up to 196 mA m^-2, thereby outperforming the control system by 244 times when HFMs were pressurized at 1.6 bar.

CONCLUSIONS

Improving methane delivery and EET are critical to enhance the performance of bioelectrochemical methane oxidation. This work demonstrates that by process engineering optimization, energy recovery from methane through its direct oxidation at relevant rates is feasible.

Electricity from lignocellulosic substrates by thermophilic Geobacillus species

Given our vast lignocellulosic biomass reserves and the difficulty in bioprocessing them without expensive pretreatment and fuel separation steps, the conversion of lignocellulosic biomass directly into electricity would be beneficial. Here we report the previously unexplored capabilities of thermophilic Geobacillus sp. strain WSUCF1 to generate electricity directly from such complex substrates in microbial fuel cells. This process obviates the need for exogenous enzymes and redox mediator supplements. Cyclic voltammetry and chromatography studies revealed the electrochemical signatures of riboflavin molecules that reflect mediated electron transfer capabilities of strain WSUCF1. Proteomics and genomics analysis corroborated that WSUCF1 biofilms uses type-II NADH dehydrogenase and demethylmenaquinone methyltransferase to transfer the electrons to conducting anode via the redox active pheromone lipoproteins localized at the cell membrane.

A Disposable, Papertronic Three-Electrode Potentiostat for Monitoring Bacterial Electrochemical Activity

Bacterial electrochemical activities can promote sustainable energy and environmental engineering applications. Characterizing their ability is critical for effectively adopting these technologies. Conventional studies of the electroactive bacteria are limited to insensitive, time-consuming, and labor-intensive two-electrode microbial fuel cell (MFC) techniques. Even the latest miniaturized MFC array is limited by irreproducibility and uncontrollability. In this work, we created a 4-well electrochemical sensing array with an integrated, custom-made three-electrode potentiostat to provide a controllable analytic capability without unwanted perturbations. A simple potentiostat circuit used two operational amplifiers and one resistor, allowing chronoamperometric and staircase voltammetric analyses of three well-known electroactive bacteria species: Shewanella oneidensis MR1, Pseudomonas aeruginosa PAO1, and Bacillus subtilis. Portability and disposability were emphasized by integrating all the functions into a paper substrate, which makes analyses possible at the point-of-use and in resource-limited settings without a bulky and expensive benchtop potentiostat. After use, the papertronic system was disposed of safely by incineration without posing any bacterial cytotoxic risks. This novel sensing platform creates an inexpensive, scalable, time-saving, high-performance, and user-friendly platform that facilitates the study of fundamental electrocatalytic activities of bacteria.

A simple, inexpensive, and rapid method to assess antibiotic effectiveness against exoelectrogenic bacteria

A sufficiently fast and simple antimicrobial susceptibility testing (AST) is urgently required to guide effective antibiotic usages and to surveil the antimicrobial resistance rate. Here, we establish a rapid, quantitative, and high-throughput phenotypic AST by measuring electrons transferred from the interiors of microbial cells to external electrodes. Because the transferred electrons are based on microbial metabolic activities and are inversely proportional to the concentration of potential antibiotics, the changes in electrical outputs can be readily used as a transducing signal to efficiently monitor bacterial growth and antibiotic susceptibility. The sensing is performed by directly measuring the total energy, or all the accumulated microbial electricity, generated by microbial fuel cells (MFCs) arranged in a large-capacity disposable, paper-based testbed. A common Gram-negative pathogenic bacterium Pseudomonas aeruginosa wild-type PAO1 and first-line antibiotic gentamicin (GEN) are used in our experiments. The minimum inhibitory concentration (MIC) values generated from our technique are validated by the gold standard broth microdilution (BMD). Our new approach provides quantitative, actionable MIC results within just 5 h because it measures electricity produced by bacterial metabolism instead of the days needed for growth-observation methods. Moreover, as the equipment needed is simple, common, and inexpensive, our test has immense potential to be adopted in the field or resource-limited hospitals and labs to provide insightful assessments for research and clinical practices.

Electroactivity of the Gram-positive bacterium Paenibacillus dendritiformis MA-72

Whilst most of the microorganisms recognized as exoelectrogens are Gram-negative bacteria, the electrogenicity of Gram-positive bacteria has not been sufficiently explored. In this study, the putative electroactivity of the Gram-positive Paenibacillus dendritiformis MA-72 strain, isolated from the anodic biofilm of long-term operated Sediment Microbial Fuel Cell (SMFC), has been investigated. SEM observations show that under polarization conditions P. dendritiformis forms a dense biofilm on carbon felt electrodes. A current density, reaching 5 mA m^-2, has been obtained at a prolonged applied potential of -0.195 V (vs. SHE), which represents 35% of the value achieved with the SMFC. The voltammetric studies confirm that the observed Faradaic current is associated with the electrochemical activity of the bacterial biofilm and not with a soluble redox mediator. The results suggest that a direct electron transfer takes place through the conductive extracellular polymer matrix via pili/nanowires and multiple cytochromes. All these findings demonstrate for the first time that the Gram-positive Paenibacillus dendritiformis MA-72 is a new exoelectrogenic bacterial strain.

Metabolic Current Production by an Oral Biofilm Pathogen Corynebacterium matruchotii

The development of a simple and direct assay for quantifying microbial metabolic activity is important for identifying antibiotic drugs. Current production capabilities of environmental bacteria via the process called extracellular electron transport (EET) from the cell interior to the exterior is well investigated in mineral-reducing bacteria and have been used for various energy and environmental applications. Recently, the capability of human pathogens for producing current has been identified in different human niches, which was suggested to be applicable for drug assessment, because the current production of a few strains correlated with metabolic activity. Herein, we report another strain, a highly abundant pathogen in human oral polymicrobial biofilm, Corynebacterium matruchotii, to have the current production capability associated with its metabolic activity. It showed the current production of 50 nA/cm² at OD₆₀₀ of 0.1 with the working electrode poised at +0.4 V vs. a standard hydrogen electrode in a three-electrode system. The addition of antibiotics that suppress the microbial metabolic activity showed a significant current decrease (>90%), establishing that current production reflected the cellular activity in this pathogen. Further, the metabolic fixation of atomically labeled ¹³C (31.68% ± 2.26%) and ¹⁵N (19.69% ± 1.41%) confirmed by high-resolution mass spectrometry indicated that C. matruchotii cells were metabolically active on the electrode surface. The identified electrochemical activity of C. matruchotii shows that this can be a simple and effective test for evaluating the impact of antibacterial compounds, and such a method might be applicable to the polymicrobial oral biofilm on electrode surfaces, given four other oral pathogens have already been shown the current production capability.

Enhanced Current Production by Exogenous Electron Mediators via Synergy of Promoting Biofilm Formation and the Electron Shuttling Process

Exogenous electron mediators (EMs) can facilitate extracellular electron transfer (EET) via electron shuttling processes, but it is still unclear whether and how biofilm formation is affected by the presence of EMs. Here, the impacts of EMs on EET and biofilm formation were investigated in bioelectrochemical systems (BESs) with Shewanella oneidensis MR-1, and the results showed that the presence of five different EMs led to high density current production. All the EMs substantially promoted biofilm formation with 15-36 times higher total biofilm DNA with EMs than without EMs, and they also increased the production of extracellular polymeric substances, which was favorable for biofilm formation. The current decreased substantially after removing EMs from the medium or by replacing electrodes without biofilm, suggesting that both biofilm and EMs are required for high density current production. EET-related gene expression was upregulated with EMs, resulting in the high flux of cell electron output. A synergistic mechanism was proposed: EMs in suspension were quickly reduced by the cells and reoxidized rapidly by the electrode, resulting in a microenvironment with sufficient oxidized EMs for biofilm formation, and thus, besides the well-known electron shuttling process, the EM-induced high biofilm formation and high Mtr gene expression could jointly contribute to the EET and subsequently produce a high density current. This study provides a new insight into EM-enhanced current production via regulating the biofilm formation and EET-related gene expression.

A 96-well high-throughput, rapid-screening platform of extracellular electron transfer in microbial fuel cells

Microbial extracellular electron transfer (EET) stimulates a plethora of intellectual concepts leading to potential applications that offer environmentally sustainable advances in the fields of biofuels, wastewater treatment, bioremediation, desalination, and biosensing. Despite its vast potential and remarkable research efforts to date, bacterial electrogenicity is arguably the most underdeveloped technology used to confront the aforementioned challenges. Severe limitations are placed in the intrinsic energy and electron transfer processes of naturally occurring microorganisms. Significant boosts in this technology can be achieved with the growth of synthetic biology tools that manipulate microbial electron transfer pathways and improve their electrogenic potential. In particular, electrogenic Pseudomonas aeruginosa has been studied with the utility of its complete genome being sequenced coupled with well-established techniques for genetic manipulation. To optimize power density production, a high-throughput, rapid and highly sensitive test array for measuring the electrogenicity of hundreds of genetically engineered P. aeruginosa mutants is needed. This task is not trivial, as the accurate and parallel quantitative measurements of bacterial electrogenicity require long measurement times (~tens of days), continuous introduction of organic fuels (~tends of milliliters), architecturally complex and often inefficient devices, and labor-intensive operation. The overall objective of this work was to enable rapid (<30 min), sensitive (>100-fold improvement), and high-throughput (>96 wells) characterization of bacterial electrogenicity from a single 5 μL culture suspension. This project used paper as a substratum that inherently produces favorable conditions for easy, rapid, and sensitive control of an electrogenic microbial suspension. From 95 isogenic P. aeruginosa mutant, an hmgA mutant generated the highest power density (39 μW/cm²), which is higher than that of wild-type P. aeruginosa and even the strongly electrogenic organism, Shewanella oneidensis (25 μW/cm²). In summary, this work will serve as a springboard for the development of novel paradigms for genetic networks that will help develop mutations or over-expression and synthetic biology constructs to identify genes in P. aeruginosa and other organisms that enhance electrogenic performance in microbial fuel cells (MFCs).