Conversion and recovery of saponifiable lipids from microalgae using a nonpolar solvent via lipase-assisted extraction

Water-mediated active conformational transitions of lipase on organic solvent interfaces

When it comes to enzyme stability and their application in organic solvents, enzyme biocatalysis has emerged as a popular substitute for conventional chemical processes. However, the demand for enzymes exhibiting improved stability remains a persistent challenge. Organic solvents can significantly impacts enzyme properties, thereby limiting their practical application. This study focuses on Lipase Thermomyces lanuginose, through molecular dynamics simulations and experiments, we quantified the effect of different solvent-lipase interfaces on the interfacial activation of lipase. Revealed molecular views of the complex solvation processes through the minimum distance distribution function. Solvent-protein interactions were used to interpret the factors influencing changes in lipase conformation and enzyme activity. We found that water content is crucial for enzyme stability, and the optimum water content for lipase activity was 35 % in the presence of benzene-water interface, which is closely related to the increase of its interfacial activation angle from 78° to 102°. Methanol induces interfacial activation in addition to significant competitive inhibition and denaturation at low water content. Our findings shed light on the importance of understanding solvent effects on enzyme function and provide practical insights for enzyme engineering and optimization in various solvent-lipase interfaces.

Role of biochar-derived DOM compositions in enhanced biodegradation of sulfamethoxazole and chloramphenicol

In the study, we investigated the different compositions of biochar-derived dissolved organic matter (BDOM) that play a key role in the biodegradation of sulfamethoxazole (SMX) and chloramphenicol (CAP) by P. stutzeri and S. putrefaciens, and found that aliphatic compounds in Group 4, fulvic acid like in Region III, and solid microbial byproduct like in region IV are key common factors. The growth and antibiotic degradation efficiency of P. stutzeri and S. putrefaciens are positively correlated with the content of Group 4 and Region III, and negatively correlated with Region IV. This is consistent with the optimal biodegradation results of BDOM700 with the highest content of Group 4 and Region III. Additionally, the degradation efficiency of SMX by Pseudomonas stutzeri is negatively correlated with the percentage of polycyclic aromatics in Group 1, but not with CAP. Similarly, the percentage of fatty acids in S. putrefaciens was positively correlated with Group 1, whereas P. stutzeri did not. This indicates that some components of BDOM have varying effects on different bacteria or types of antibiotics. This study provides new insights into enhancing antibiotic biodegradation by controlling the composition of BDOM.

A comprehensive review on nanocatalysts and nanobiocatalysts for biodiesel production in Indonesia, Malaysia, Brazil and USA

Biodiesel is an alternative to fossil-derived diesel with similar properties and several environmental benefits. Biodiesel production using conventional catalysts such as homogeneous, heterogeneous, or enzymatic catalysts faces a problem regarding catalysts deactivation after repeated reaction cycles. Heterogeneous nanocatalysts and nanobiocatalysts (enzymes) have shown better advantages due to higher activity, recyclability, larger surface area, and improved active sites. Despite a large number of studies on this subject, there are still challenges regarding its stability, recyclability, and scale-up processes for biodiesel production. Therefore, the purpose of this study is to review current modifications and role of nanocatalysts and nanobiocatalysts and also to observe effect of various parameters on biodiesel production. Nanocatalysts and nanobiocatalysts demonstrate long-term stability due to strong Brønsted-Lewis acidity, larger active spots and better accessibility leading to enhancethe biodiesel production. Incorporation of metal supporting positively contributes to shorten the reaction time and enhance the longer reusability. Furthermore, proper operating parameters play a vital role to optimize the biodiesel productivity in the commercial scale process due to higher conversion, yield and selectivity with the lower process cost. This article also analyses the relationship between different types of feedstocks towards the quality and quantity of biodiesel production. Crude palm oil is convinced as the most prospective and promising feedstock due to massive production, low cost, and easily available. It also evaluates key factors and technologies for biodiesel production in Indonesia, Malaysia, Brazil, and the USA as the biggest biodiesel production supply.

Graphene-based catalysts for biodiesel production: Characteristics and performance

Biodiesel is a promising alternative to reduce the dependency on fossil fuels. However, biodiesel's cost is still higher than its petroleum counterpart, hence its production process must be modified to make it economically viable. Microalgae are an alternative feedstock to replace agricultural crops for biodiesel production, and offer several advantages such as fast growth, use of non-arable land, growth in saline and wastewater, and high lipid yield. Unfortunately, biodiesel production from microalgae is very energy-intensive and costly, mainly due to the high energy consumption required for dewatering and drying. Therefore, utilizing wet microalgal biomass instead of dry biomass can be a promising solution to reduce the biodiesel production cost Furthermore, the use of heterogeneous catalysts offers high efficiency, recoverability, and reusability, and is therefore very promising from the economic and environmental perspectives. The unique characteristics of graphene-based nano-catalysts, such as their high surface area, two-dimensional structure, and functional groups, make them suitable candidates for biodiesel production. In this review, the use of graphene-based catalysts for biodiesel production is analyzed in depth, and their efficiency compared to other heterogeneous catalysts is scrutinized. Moreover, their recoverability, reusability, and economic feasibility are critically discussed, and their potential to produce biodiesel from wet microalgae is explored as a sustainable and cost-effective approach.

The effect of cell disruption on the extraction of oil and protein from concentrated microalgae slurries

Novel cell-disruption combinations (autolytic incubation and hypotonic osmotic shock combined with HPH or pH12) were used to investigate the fundamental mass transfer of lipids and proteins from Nannochloropsis slurries (140 mg biomass/g slurry). Since neutral lipids exist as cytosolic globules, their mass transfer was directly dependent on disintegration of cell walls. Complete recovery was obtained with complete physical disruption. HPH combinations exerted more physical disruption and led to higher yields than pH12. In contrast, proteins exist as both cytosolic water-soluble fractions and cell-wall/membrane structural fractions and have a complex extraction behaviour. Mass transfer of cytosolic proteins was dependent on cell-wall disintegration, while that of structural proteins was governed by cell-wall disintegration and severance of protein linkage from the wall/membrane. HPH combinations exerted only physical disruption and were limited to releasing soluble proteins. pH12 combinations hydrolysed chemical linkages in addition to exerting physical disruption, releasing both soluble and structural proteins.

Effects of biochar on biodegradation of sulfamethoxazole and chloramphenicol by Pseudomonas stutzeri and Shewanella putrefaciens: Microbial growth, fatty acids, and the expression quantity of genes

An incubation experiment was conducted to investigate whether different biochar could enhance the biodegradation of sulfamethoxazole (SMX) and chloramphenicol (CAP). During incubation in nutrient medium solution, the degradation efficiencies of SMX by P. stutzeri and S. putrefaciens obtained 61.79% and 68.67% respectively, while CAP was 85.75% and 85.70%. The biodegradation efficiencies of SMX and CAP increased for P. stutzeri cultured with biochar and increased for S. putrefaciens cultured with high-concentration biochar (500, 1,000, 2,000 mg L^-1). Additionally, TOC and TN contents were significantly decreased during the biodegradation process. Hence, the effects of biochar on microbial growth, fatty acids and expression genes, biodegradation products were studied. The content of bacteria, saturated fatty acids and expression genes showed a positive correlation with the content of TOC released from biochar, while the biodegradation products would not change when bacteria was cultured with biochar. These indicated that biochar improved the antibiotics biodegradation efficiencies via involvement in the bacterial growth, changing the components of fatty acids, increasing the expression quantity of genes. This research suggests that micro-biological degradation with biochar is a promising technology to treat specific antibiotics in the environment.

Pretreatments for enhancing sewage sludge reduction and reuse in lipid production

BACKGROUND

Converting wastewater sludge to lipid is considered as one of the best strategies of sludge management. The current problem of lipid production from wastewater sludge is the low yield (0.10-0.16 g lipid/g dry sludge) due to the low availability of easily uptaken materials (such as soluble monosaccharide and oligosaccharide) in sludge to oleaginous microorganism (Rhodotorula glutinis, Trichosporon oleaginosus, Lipomyces starkeyi). Pretreatments are efficient methods to improve sludge bioavailability. This study is aimed to achieve high lipid production from sludge and high sludge reduction.

RESULTS

In this study, it was observed that the soluble chemical oxygen demand (SCOD) had significantly increased after different pretreatment. The SCOD in the supernatant was increased from 32.64 to 180.25 mg/L, 924.16 mg/L, 1029.89 mg/L and 3708.31 mg/L after acidic (pH 2 for 2 h), alkaline (pH 12 for 2 h), microwave irradiation (15 min with 5 min interval), and ultrasonication (30 min at 450 W and 20 kHz frequency with 5 s on and 2 s off mode) pretreatment, respectively. Pretreatments have also increased the release of total nitrogen (TN) and total phosphorus (TP) from solids. The sludge after different pretreatments were used as a medium for lipid production, and the highest lipid content (36.67% g/g) was obtained in the fermentation with ultrasonication pretreatment sludge, and the sludge reduction was 63.10%. For other pretreatments, the lipid content and sludge reduction were 18.42% and 32.63% in acid pretreatment case, 21.08% and 36.44% in alkaline pretreatment case, and 26.31% and 43.03% in microwave pretreatment case, respectively.

CONCLUSION

It was found that ultrasonication pretreatment was the most efficient way to increase the sludge biodegradability (SCOD) and to release TN and TP from solid phase to liquid phase. Pretreated sludge for lipid production achieved significant improvement in lipid yield and sludge reduction. Lipids produced from pretreated sludge were transesterified to biodiesel and the analysis showed that biodiesel had a similar composition as commercial biodiesel. The study reveals that pretreatment on sludge is a promising method for enhancing biological sludge management efficiency.

Lipid extraction from wet Nannochloropsis biomass via enzyme-assisted three phase partitioning

A green and efficient enzyme assisted three phase partitioning (EA-TPP) process was firstly developed to extract microalgal lipids using wet Nannochloropsis sp. biomass. In the pretreatment of microalgal biomass by four hydrolytic enzymes, TPP obtained a higher TFAs lipid extraction efficiency by cellulase compared with the resting enzymes. After optimization by EA-TPP of the wet disrupted Nannochloropsis biomass (3 g), the maximum TFAs extraction yield (90.40%) was attained at 20% ammonium sulphate, 6-7 pH, 1:2 slurry/tert-butanol ratio and 70 °C for 2 h incubation time and two extraction cycles. Moreover, results also revealed that the lipidic species compositions of Nannochloropsis sp. biomass were greatly related with the EA-TPP parameters. In the laboratory scale for wet disrupted microalgae biomass, EA-TPP process achieved 88.70% TFAs extraction yield under the optimized conditions. In all, EA-TPP process could be a promising approach to extract microalgae lipids for food application using wet microalgae biomass.

Efficient Biodiesel Conversion from Microalgae Oil of Schizochytrium sp

Abstract: Microalgae oil has been regarded as a promising feedstock for biodiesel production. However, microalgae oil usually contains some non-lipid components, such as pigments. Microalgae oil could be converted to biodiesel effectively with a two-step process to decrease the negative effect caused by by-product glycerol generated in traditional biodiesel production process. Firstly, microalgae oil was hydrolysed to free fatty acids (FFAs) and then FFAs were converted to methyl ester. In this study, the hydrolysis of microalgae oil from Schizochytrium sp. was systematically investigated and microalgae oil could be hydrolysed effectively to FFAs at both non-catalytic and acid-catalytic conditions. The hydrolysis degree of 97.5% was obtained under non-catalytic conditions of 220 °C and a water to oil ratio of 10:1 (w:w). The hydrolysis degree of 97.1% was obtained with the optimized sulphuric acid catalytic conditions of 95 °C, and a ratio of water to oil 3:1. The lipase Novozym435-mediated esterification with the hydrolysed FFAs was explored and a FAME (Fatty Acids Methyl Ester) yield of 95.1% was achieved. The conversion of different FFAs also was compared and the results indicated that lipase Novozym435-mediated methanolysis was effective for the preparation of biodiesel as well as poly unsaturated fatty acids (PUFAs).

Direct enzymatic ethanolysis of potential Nannochloropsis biomass for co-production of sustainable biodiesel and nutraceutical eicosapentaenoic acid

BACKGROUND

Marine microalga Nannochloropsis is a promising source for the production of renewable and sustainable biodiesel in replacement of depleting petroleum. Other than biodiesel, Nannochloropsis is a green and potential resource for the commercial production of nutraceutical eicosapentaenoic acid (EPA, C_20:5). In recent studies, low-value biodiesel can be achieved by transesterification of Nannochloropsis biomass. However, it is undoubtedly wasteful to produce microalgal biodiesel containing EPA from nutritional and economical aspects. A new strategy was addressed and exploited to produce low-value bulky biodiesel along with EPA enrichment via enzymatic ethanolysis of Nannochloropsis biomass with a specific lipase.

RESULTS

Cellulase pretreatment on Nannochloropsis sp. biomass significantly improved the biodiesel conversion by direct ethanolysis with five enzymes from Candida antarctica (CALA and CALB), Thermomyces lanuginosus (TL), Rhizomucor miehei (RM), and Aspergillus oryzae (PLA). Among these five biocatalysts, CALA was the best suitable enzyme to yield high biodiesel conversion and effectively enrich EPA. After optimization, the maximum biodiesel conversion (46.53-48.57%) was attained by CALA at 8:1 ethanol/biomass ratio (v/w) in 10-15% water content with 10% lipase weight at 35 °C for 72 h. Meanwhile, EPA (60.81%) was highly enriched in microalgae NPLs (neutral lipids and polar lipids), increasing original EPA levels by 1.51-fold. Moreover, this process was re-evaluated with two Nannochloropsis species (IMET1 and Salina 537). Under the optimized conditions, the biodiesel conversions of IMET1 and Salina 537 by CALA were 63.41% and 54.33%, respectively. EPA contents of microalgal NPLs were 50.06% for IMET1 and 53.73% for Salina 537.

CONCLUSION

CALA was the potential biocatalyst to discriminate against EPA in the ethanolysis of Nannochloropsis biomass. The biodiesel conversion and EPA enrich efficiency of CALA were greatly dependent on lipidic class and fatty acid compositions of Nannochloropsis biomass. CALA-catalyzed ethanolysis with Nannochloropsis biomass was a promising approach for co-production of low-value biodiesel and high-value microalgae products rich in EPA.

Cost-effective biodiesel production from wet microalgal biomass by a novel two-step enzymatic process

In this study, a novel two-step enzymatic process was firstly established to produce microalgae biodiesel using wet Chlorella biomass. In the first hydrolysis step, to reduce energy consumption and effectively disrupt microalgal cell wall, among cellulase, hemicellulase, papain, lysozyme and pectinase, the highest hydrolysis efficiency (67.52%) was obtained by cellulase at pH 5.0 with enzyme dosage of 200 U/g dry biomass at 40 °C for 12 h. In the second transesterification step, compared with liquid CAL-A/B from Candida antarctica and PLA from Aspergillus oryzae, liquid lipase TL from Thermomyces lanuginosus achieved the highest biodiesel conversion at 81.15:1 (v/w) ethanol/g TFAs ratio in 78-83% water content with 100 PLU/g TFAs lipase loading at 25 °C for 48 h. Moreover, similar results were obtained with three Chlorella species by this process. Overall, this two-step enzymatic process was a green, low-energy and efficient method for cost-effective biodiesel production using wet microalgal biomass.