Embedding photosynthetic biorefineries with circular economies: Exploring the waste recycling potential of Arthrospira sp. to produce high quality by-products

Cyanoremediation and phyconanotechnology: cyanobacteria for metal biosorption toward a circular economy

Cyanobacteria are widespread phototrophic microorganisms that represent a promising biotechnological tool to satisfy current sustainability and circularity requirements. They are potential bio-factories of a wide range of compounds that can be exploited in several fields including bioremediation and nanotechnology sectors. This article aims to illustrate the most recent trends in the use of cyanobacteria for the bioremoval (i.e., cyanoremediation) of heavy metals and metal recovery and reuse. Heavy metal biosorption by cyanobacteria can be combined with the consecutive valorization of the obtained metal-organic materials to get added-value compounds, including metal nanoparticles, opening the field of phyconanotechnology. It is thus possible that the use of combined approaches could increase the environmental and economic feasibility of cyanobacteria-based processes, promoting the transition toward a circular economy.

Multi-product biorefinery from Arthrospira platensis biomass as feedstock for bioethanol and lactic acid production

With the aim to reach the maximum recovery of bulk and specialty bioproducts while minimizing waste generation, a multi-product biorefinery for ethanol and lactic acid production from the biomass of cyanobacterium Arthrospira platensis was investigated. Therefore, the residual biomass resulting from different pretreatments consisting of supercritical fluid extraction (SF) and microwave assisted extraction with non-polar (MN) and polar solvents (MP), previously applied on A. platensis to extract bioactive metabolites, was further valorized. In particular, it was used as a substrate for fermentation with Saccharomyces cerevisiae LPB-287 and Lactobacillus acidophilus ATCC 43121 to produce bioethanol (BE) and lactic acid (LA), respectively. The maximum concentrations achieved were 3.02 ± 0.07 g/L of BE by the MN process at 120 rpm 30 °C, and 9.67 ± 0.05 g/L of LA by the SF process at 120 rpm 37 °C. An economic analysis of BE and LA production was carried out to elucidate the impact of fermentation scale, fermenter costs, production titer, fermentation time and cyanobacterial biomass production cost. The results indicated that the critical variables are fermenter scale, equipment cost, and product titer; time process was analyzed but was not critical. As scale increased, costs tended to stabilize, but also more product was generated, which causes production costs per unit of product to sharply decrease. The median value of production cost was US$ 1.27 and US$ 0.39, for BE and LA, respectively, supporting the concept of cyanobacterium biomass being used for fermentation and subsequent extraction to obtain ethanol and lactic acid as end products from A. platensis.

Biologically-Based and Physiochemical Life Support and In Situ Resource Utilization for Exploration of the Solar System-Reviewing the Current State and Defining Future Development Needs

The future of long-duration spaceflight missions will place our vehicles and crew outside of the comfort of low-Earth orbit. Luxuries of quick resupply and frequent crew changes will not be available. Future missions will have to be adapted to low resource environments and be suited to use resources at their destinations to complete the latter parts of the mission. This includes the production of food, oxygen, and return fuel for human flight. In this chapter, we performed a review of the current literature, and offer a vision for the implementation of cyanobacteria-based bio-regenerative life support systems and in situ resource utilization during long duration expeditions, using the Moon and Mars for examples. Much work has been done to understand the nutritional benefits of cyanobacteria and their ability to survive in extreme environments like what is expected on other celestial objects. Fuel production is still in its infancy, but cyanobacterial production of methane is a promising front. In this chapter, we put forth a vision of a three-stage reactor system for regolith processing, nutritional and atmospheric production, and biofuel production as well as diving into what that system will look like during flight and a discussion on containment considerations.

Use of Photobioreactors in Regenerative Life Support Systems for Human Space Exploration

There are still many challenges to overcome for human space exploration beyond low Earth orbit (LEO) (e.g., to the Moon) and for long-term missions (e.g., to Mars). One of the biggest problems is the reliable air, water and food supply for the crew. Bioregenerative life support systems (BLSS) aim to overcome these challenges using bioreactors for waste treatment, air and water revitalization as well as food production. In this review we focus on the microbial photosynthetic bioprocess and photobioreactors in space, which allow removal of toxic carbon dioxide (CO2) and production of oxygen (O2) and edible biomass. This paper gives an overview of the conducted space experiments in LEO with photobioreactors and the precursor work (on ground and in space) for BLSS projects over the last 30 years. We discuss the different hardware approaches as well as the organisms tested for these bioreactors. Even though a lot of experiments showed successful biological air revitalization on ground, the transfer to the space environment is far from trivial. For example, gas-liquid transfer phenomena are different under microgravity conditions which inevitably can affect the cultivation process and the oxygen production. In this review, we also highlight the missing expertise in this research field to pave the way for future space photobioreactor development and we point to future experiments needed to master the challenge of a fully functional BLSS.

Investigation of a biosystem based on Arthrospira platensis for air revitalisation in spacecrafts: Performance evaluation through response surface methodology

Arthrospira platensis is featured as a promising microalgae candidate for the development of the biosystems for air revitalisation in spacecrafts and life support in space. An enhanced configuration of a sparged type photobioreactor (PBR), containing 5 L of A. platensis culture, which was equipped with an external LED lighting tube around the reactor, was used in this study. The PBR was operated under dynamic conditions (0.5 L/min) with synthetic air containing CO₂ (400, 900, 1400 ppm) and other gas traces (NO₂ 1 ppm, SO₂ 2.5 ppm, acetic acid vapours 1 ppm), at various light intensities (1.5, 2.5, 3.5 klux), according to an experimental design. The removal of gas traces (NO₂, SO₂ and acetic acid vapours) was below the detection limit (e.g. above 90% removal efficiency), while the removal of CO₂ ranged between 69% and 85%, depending on the initial CO₂ concentration and the light intensity. Thus, the system is able to roughly decrease the contaminant concentration from 1 ppm to below 0.1 ppm for NO₂, 2.5 ppm to below 0.1 ppm for SO₂, 1 ppm to below 1 ppb for acetic acid vapours and from 1400 ppm to 370 or from 400 ppm to 60 ppm for CO₂. The system performance was thus subject to mathematical modelling and optimization in terms of CO₂ removal efficiency and CO₂ elimination capacity, which were also corroborated with the power consumption for illumination.

Review of Circular Economy in urban water sector: Challenges and opportunities in India

Increasing urbanization and rapid depletion of resources have forced authorities to shift from traditional linear system of take-make-use-dispose to circular system of resource conservation. Circular Economy (CE) is a sustainable development approach that works on the waste management strategy of reduce, reuse, recycle, and recover. Considerable work has been performed on CE in various sectors such as in electronic sector, construction sector, automotive sector, etc. However, CE in the water sector is gaining rapid attention, because of imbalance in water resources and the prevailing linear approach. The aim of this study is to review the world-wide growth of CE concept in the water sector from an economic, environmental, social, and technical perspective. 98 publications were selected by systematic literature review and categorized in economic, environmental, social, and technical criteria including a combination of multiple criteria. In this study, the world-wide status of CE implementation in the water sector is assessed and strategies to encourage and enhance CE implementation are proposed. The six BS8001:2017 principles and 6Rs (reduce, reuse, recycle, reclaim, recover, restore) of waste management are critically analyzed for deriving recommendations and successful implementation of CE in water sector. Finally, challenges and opportunities to implement CE in the water sector in India are discussed.

Multiproduct biorefinery from Arthrospira spp. towards zero waste: Current status and future trends

Considering the high- and low-value product perspectives, Arthrospira spp. are one of the most industrially exploited microalgae. However, currently, the biomass is being utilized for one specific product resulting in a steep upsurge in the overall production cost. Hence, to boost the economic viability of Arthrospira biorefinery process, every high- and low-value products from it ought to be valorized. Envisioning how costlier can be the multiproduct biorefinery concept owing to the downstream processing at an industrial scale, it is quite essential to look for new trends and encouraging solutions. This article intended to propose a sustainable biorefinery in the wake of the current understanding of the present constraints and challenges associated with Arthrospira biorefinery. The current review aimed at defining the future aspects of this biorefinery including integration and optimization of the culture strategy, and, implementation of new ingenious techniques to improve downstream processing (harvesting, extraction, fractionation, and purification).