Enhanced Rhodococcus pyridinivorans HR-1 anode performance by adding trehalose lipid in microbial fuel cell

Ammonia recovery from organic nitrogen in synthetic dairy manure with a microbial fuel cell

Increasing pressures on the animal and cropland agriculture sectors have led to the realization of problems with animal waste management and ammonia-based fertilizer supply. Bioelectrochemical systems (BES) are a new-age technology that offer a way to address these problems. Microbial fuel cells (MFCs), one type of BES, are traditionally used for electricity generation from microbial degradation of organic matters, but can also be used to recover nutrients from wastes simultaneous with treatment. This research investigated an MFC for ammonia recovery from the organic nitrogen (orgN) fraction of synthetic dairy manure, using the simple amino acid glycine as the orgN source. We used five different synthetic manure compositions to determine their effects on MFC performance, and found minimal sacrifices in performance under orgN conditions when compared to the base condition without orgN. The MFC achieved greater than 90% COD removal in all orgN conditions. Nitrogen (N) removal efficiencies of between 40% and 60% were achieved in orgN conditions, indicating that organic nitrogen can be used as the substrate for ammonia mineralization and further recovery as fertilizer. In addition, we found the MFC was largely populated by electrogenic organisms from the phyla Bacteroidota, Firmicutes, Proteobacteria, and Halobacterota, with organisms in both Bacteroidota and Firmicutes capable of N mineralization present. Lastly, we found that in conditions where orgN is scarce and the only N source provided, microbes preferentially degraded organic matter from other dead organisms, especially as an N source. This increases the concentration of N in the MFC system and introduces important operational constraints for MFCs operated for ammonia recovery from orgN.

The parallel electron transfer pathways of biofilm and self-secreted electron shuttles in gram-positive strain Rhodococcus pyridinivorans HR-1 inoculated microbial fuel cell

Microbial fuel cell (MFC) exhibits huge potentials in disposing wastewater and extra energy consumption. Exploring useful microorganisms for MFC is the crucial section. Herein, the electrochemical mechanism of extracellular anaerobic respiration in MFC inoculated with gram-positive Rhodococcus pyridinivorans HR-1, was first revealed. The MFC exhibited rapid recovery of currents on anode, and could recover to maximum output within one hour, with redox peaks near -0.38 and -0.18 V through electron transfer between the biofilm and anode. When the biofilm-based pathway was blocked by wrapping the anode with Millipore filter membrane, HR-1 inoculated MFC could still generate electricity within a longer recovery period (∼35 h) during anolyte exchange. This was proposed as a self-secreted electron shuttle pathway for electron transfer in R. pyridinivorans HR-1. Cyclic voltammetry analysis revealed that the biofilm-based and self-secreted electron shuttle-based pathways co-existed in R. pyridinivorans HR-1 inoculated MFC, which could play synergistic roles in electricity generation.

Enhancing Biodegradation of Pyridine with Trehalose Lipid in Rhodococcus pyridinivorans sp. Strain HR-1-Inoculated Microbial Fuel Cell

A Gram-positive exoelectrogen Rhodococcus pyridinivorans sp. strain HR-1 was cultivated from leachate-fed microbial fuel cell (MFC) to study the biodegradation effect of pyridine. In the comparison with mixed cultured MFC, HR-1 presented a remarkable electrical capacity with a maximum output of 4.33 W/m3 under 30 °C in neutral anolyte with 1 g/L acetate as a substrate. Further, HR-1 demonstrated the environmental resistance as a Gram-positive strain. Microbial metabolism was evident at pH between 5–9 and temperature in the range of 20–40 °C, whereas optimal condition for pyridine degradation was observed at 30 °C. This is the first study reporting the degradation of pyridine in the bio-electrochemical system that achieved a 42% ± 5% degradation rate in a full operation cycle at 2 g/L of the concentration. Considering the nonnegligible internal resistance of HR-1-inoculated MFC, trehalose lipid was also introduced as a bio-surfactant to reduce the charge transfer obstacle between the microbes and the electrodes. The surface morphology illustrated that the strain had a plump shape with a high specific area. Accordingly, bio-surfactant addition promoted the anode biomass (1.2 ± 0.1 mg/cm2 to 1.7 ± 0.2 mg/cm2) and achieved a higher degradation rate (68% ± 4%). The feasibility of electrochemical disposal on pyridine and eminent adaptability of strain sp. HR-1 as a Gram-positive exoelectrogen makes MFC a practical approach for real application.

Maximizing electron flux, microbial diversity and gene abundance in MFC powered electro-Fenton system by optimizing co-addition of lysozyme and 2-bromoethanesulfonate

In this study, a microbial fuel cell powered electro-Fenton system (MFCⓅEFs) was established in order to overcome the shortcomings of low electron flux and unexpected methane production, while simultaneously treating excess sludge (ES, substrate) and refractory syringic acid (SA). A strategy of co-adding lysozyme (LZ, as ES degradation catalyst) and 2-bromoethanesulfonate (BES, as methane inhibitor) into ES was optimized in MFCⓅEFs to maximize electron flux, microbial community diversity and functional gene abundance. The removal of sludge total chemical oxygen demand (TCOD) achieved 81.69% in 25 d under an optimal co-addition strategy (40.41 mg/gSS of LZ, 27.03 mmol/L of BES, adding on 22.8 h of the7th day), with a simultaneous high degradation of SA (99.30% in 25 h). Correspondingly, a maximum power density of 3.35 W/m³ was achieved (only 0.62 W/m³ from the control), which effectively realizes in-situ micro-electricity generation and utilization for bioelectric Fenton processes. Moreover, 42.25% of the total charges were employed for bio-electricity generation. The electricigens of Pseudomonas, Acinetobacter and Chlorobium showed effective enrichment, while the abundance of methanogenesis archaea was extremely decreased. Functional genes associated with methanogenesis including mtaA, hdra, and mcrA were effectively inhibited. The life cycle assessment along with an optimized co-addition strategy illustrated a beneficial environmental effect, particularly in terms of ecosystem quality and climate change. Above all, an enhanced synchronous degradation of excess sludge and refractory pollutants had been realized in a green and environmentally friendly way.

Hydrogen Production in Microbial Electrolysis Cells Based on Bacterial Anodes Encapsulated in a Small Bioreactor Platform

Microbial electrolysis cells (MECs) are an emerging technology capable of harvesting part of the potential chemical energy in organic compounds while producing hydrogen. One of the main obstacles in MECs is the bacterial anode, which usually contains mixed cultures. Non-exoelectrogens can act as a physical barrier by settling on the anode surface and displacing the exoelectrogenic microorganisms. Those non-exoelectrogens can also compete with the exoelectrogenic microorganisms for nutrients and reduce hydrogen production. In addition, the bacterial anode needs to withstand the shear and friction forces existing in domestic wastewater plants. In this study, a bacterial anode was encapsulated by a microfiltration membrane. The novel encapsulation technology is based on a small bioreactor platform (SBP) recently developed for achieving successful bioaugmentation in wastewater treatment plants. The 3D capsule (2.5 cm in length, 0.8 cm in diameter) physically separates the exoelectrogenic biofilm on the carbon cloth anode material from the natural microorganisms in the wastewater, while enabling the diffusion of nutrients through the capsule membrane. MECs based on the SBP anode (MEC-SBPs) and the MECs based on a nonencapsulated anode (MEC control) were fed with Geobacter medium supplied with acetate for 32 days, and then with artificial wastewater for another 46 days. The electrochemical activity, chemical oxygen demand (COD), bacterial anode viability and relative distribution on the MEC-SBP anode were compared with the MEC control. When the MECs were fed with artificial wastewater, the MEC-SBP produced (at −0.6 V) 1.70 ± 0.22 A m⁻², twice that of the MEC control. The hydrogen evolution rates were 0.017 and 0.005 m³ m⁻³ day⁻¹, respectively. The COD consumption rate for both was about the same at 650 ± 70 mg L⁻¹. We assume that developing the encapsulated bacterial anode using the SBP technology will help overcome the problem of contamination by non-exoelectrogenic bacteria, as well as the shear and friction forces in wastewater plants.

Long-term in situ bioelectrochemical monitoring of biohythane process: Metabolic interactions and microbial evolution

Microbial stability and evolution are a critical aspect for biosensors, especially in detecting dynamic and emerging anaerobic biohythane production. In this study, two upflow air-cathode chamber microbial fuel cells (UMFCs) were developed for in situ monitoring of the biohydrogen and biomethane reactors under a COD range of 1000-6000 mg/L and 150-1000 mg/L, respectively. Illumina MiSeq sequencing evidenced the dramatic shift of dominant microbial communities in UMFCs from hydrolytic and acidification bacteria (Clostridiaceae_1, Ruminococcaceae, Peptostreptococcaceae) to acetate-oxidizing bacteria (Synergistaceae, Dysgonomonadaceae, Spirochaetaceae). In addition, exoelectroactive bacteria evaluated from Enterobacteriaceae and Burkholderiaceae to Desulfovibrionaceae and Propionibacteriaceae. Especially, Hydrogenotrophic methanogens (Methanobacteriaceae) were abundant at 93.41% in UMFC (for monitoring hydrogen reactor), which was speculated to be a major metabolic pathway for methane production. Principal component analysis revealed a similarity in microbial structure between UMFCs and methane bioreactors. Microbial network analysis suggested a more stable community structure of UMFCs with 205 days' operation.

Improving the catalytic performance of Pichia pastoris whole-cell biocatalysts by fermentation process

Whole-cell biocatalysts have a wide range of applications in many fields. However, the transport of substrates is tricky when applying whole-cell biocatalysts for industrial production. In this research, P. pastoris whole-cell biocatalysts were constructed for rebaudioside A synthesis. Sucrose synthase was expressed intracellularly while UDP-glycosyltransferase was displayed on the cell wall surface simultaneously. As an alternative method, a fermentation process is applied to relieve the substrate transport-limitation of P. pastoris whole-cell biocatalysts. This fermentation process was much simpler, more energy-saving, and greener than additional operating after collecting cells to improve the catalytic ability of whole-cell biocatalysts. Compared with the general fermentation process, the protein production capacity of cells did not decrease. Meanwhile, the activity of whole-cell biocatalysts was increased to 262%, which indicates that the permeability and space resistance were improved to relieve the transport-limitations. Furthermore, the induction time was reduced from 60 h to 36 h. The fermentation process offered significant advantages over traditional permeabilizing reagent treatment and ultrasonication treatment based on the high efficiency and simplicity.

Fermentation process was applied to relieve the substrate transport-limitation of P. pastoris whole-cell biocatalysts, which was much simpler, more energy-saving and greener than c traditional permeabilizing reagent and ultrasonication treatment.

Analysis of the biodegradative and adaptive potential of the novel polychlorinated biphenyl degrader Rhodococcus sp. WAY2 revealed by its complete genome sequence

The complete genome sequence of Rhodococcus sp. WAY2 (WAY2) consists of a circular chromosome, three linear replicons and a small circular plasmid. The linear replicons contain typical actinobacterial invertron-type telomeres with the central CGTXCGC motif. Comparative phylogenetic analysis of the 16S rRNA gene along with phylogenomic analysis based on the genome-to-genome blast distance phylogeny (GBDP) algorithm and digital DNA–DNA hybridization (dDDH) with other Rhodococcus type strains resulted in a clear differentiation of WAY2, which is likely a new species. The genome of WAY2 contains five distinct clusters of bph, etb and nah genes, putatively involved in the degradation of several aromatic compounds. These clusters are distributed throughout the linear plasmids. The high sequence homology of the ring-hydroxylating subunits of these systems with other known enzymes has allowed us to model the range of aromatic substrates they could degrade. Further functional characterization revealed that WAY2 was able to grow with biphenyl, naphthalene and xylene as sole carbon and energy sources, and could oxidize multiple aromatic compounds, including ethylbenzene, phenanthrene, dibenzofuran and toluene. In addition, WAY2 was able to co-metabolize 23 polychlorinated biphenyl congeners, consistent with the five different ring-hydroxylating systems encoded by its genome. WAY2 could also use n-alkanes of various chain-lengths as a sole carbon source, probably due to the presence of alkB and ladA gene copies, which are only found in its chromosome. These results show that WAY2 has a potential to be used for the biodegradation of multiple organic compounds.

Flavin-mediated extracellular electron transfer in Gram-positive bacteria Bacillus cereus DIF1 and Rhodococcus ruber DIF2

A flavin-mediated EET process was reported here in two new isolated electrochemically active Gram-positive bacterial strains DIF1 and DIF2.