Occurrence of non-toxic bioemulsifiers during polyhydroxyalkanoate production by Pseudomonas strains valorizing crude glycerol by-product

Bacteria for Bioplastics: Progress, Applications, and Challenges

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Polyhydroxyalkanoate production in Pseudomonas putida from alkanoic acids of varying lengths

Many studies have been conducted to produce microbial polyhydroxyalkanoates (PHA), a biopolymer, from Pseudomonas sp. fed with various alkanoic acids. Because this previous data was collected using methodologies that varied in critical aspects, such as culture media and size range of alkanoic acids, it has been difficult to compare the results for a thorough understanding of the relationship between feedstock and PHA production. Therefore, this study utilized consistent culture media with a wide range of alkanoic acids (C7-C14) to produce medium chain length PHAs. Three strains of Pseudomonas putida (NRRL B-14875, KT2440, and GN112) were used, and growth, cell dry weight, PHA titer, monomer distribution, and molecular weights were all examined. It was determined that although all the strains produced similar PHA titers using C7-C9 alkanoic acids, significant differences were observed with the use of longer chain feedstocks. Specifically, KT2440 and its derivative GN112 produced higher PHA titers compared to B-14875 when fed longer chain alkanoates. We also compared several analytical techniques for determining amounts of PHA and found they produced different results. In addition, the use of an internal standard had a higher risk of calculating inaccurate concentrations compared to an external standard. These observations highlight the importance of considering this aspect of analysis when evaluating different studies.

Sustainable production of bioemulsifiers, a critical overview from microorganisms to promising applications

Microbial bioemulsifiers are molecules of amphiphilic nature and high molecular weight that are efficient in emulsifying two immiscible phases such as water and oil. These molecules are less effective in reducing surface tension and are synthesized by bacteria, yeast and filamentous fungi. Unlike synthetic emulsifiers, microbial bioemulsifiers have unique advantages such as biocompatibility, non-toxicity, biodegradability, efficiency at low concentrations and high selectivity under different conditions of pH, temperature and salinity. The adoption of microbial bioemulsifiers as alternatives to their synthetic counterparts has been growing in ongoing research. This article analyzes the production of microbial-based emulsifiers, the raw materials and fermentation processes used, as well as the scale-up and commercial applications of some of these biomolecules. The current trend of incorporating natural compounds into industrial formulations indicates that the search for new bioemulsifiers will continue to increase, with emphasis on performance improvement and economically viable processes.

Biosynthesis and biodegradation of poly(3-hydroxybutyrate) from Priestia flexa; A promising mangrove halophyte towards the development of sustainable eco-friendly bioplastics

The protracted persistence of petrochemical plastics in the environment and their non-biodegradability impede the survival of living creatures. Recently, biopolymers are being thoroughly researched as a potential replacement for conventional plastics. This present study sought to locate Poly(3-hydroxybutyrate) synthesizing bacterial species prevalent in the mangrove ecosystem. Six halophilic bacterial isolates were obtained from the mangrove habitat, four isolates displayed superior cell dry weight as well as PHB accumulation. Isolate PMPHB5 showed the highest cell dry weight (4.92 ± 0.02 g/L), while the maximum PHA yield (80%) was found with PMPHB7. Hence, PMPHB7 was chosen for further optimization of carbon source wherein glucose demonstrated improved cell growth as well as PHB production. The characterization of the PHB granules was performed by FT-IR spectroscopy and FE-SEM EDX. The presence of characteristic elements in the sample was confirmed using EDX. Isolate PMPHB7 was further identified as Priestia flexa through 16S rRNA gene sequencing (GenBank accession number: ON362236) and a phylogenetic tree was constructed to reveal the molecular relationships of this organism with others. The solvent-cast biopolymer film was made to check the biodegradability of the extracted PHB. When buried in soil, it was found that the biopolymer film exhibited approximately 73% biodegradation after 21 days. Thus, the present study sheds light on the potential of mangrove-associated halophytes to efficiently produce PHB that is readily biodegradable in soil.

Identification of cultivable bacterial strains producing biosurfactants/bioemulsifiers isolated from an Algerian oil refinery

Algerian petrochemical industrial areas are usually running spills and leakages of hydrocarbons, which constitutes a major source of toxic compounds in soil such as aromatic hydrocarbons. In this paper, samples of crude oil-polluted soil were collected from Skikda's oil refinery and were subjected to mono and polyaromatic hydrocarbons threshold assessment. Soil physicochemical parameters were determined for each sample to examine their response to pollution. Amid 34 isolated bacteria, eleven strains were selected as best Biosurfactants (Bs)/Bioemulsifiers (Be) producers and were assigned to Firmicutes and Proteobacteria phyla based on molecular identification. Phylogenetic analysis of partial 16S rDNA gene sequences allowed the construction of evolutionary trees by means of the maximum likelihood method. Accordingly, strains were similar to Bacillus spp., Priesta spp., Pseudomonas spp., Enterobacter spp. and Kosakonia spp. with more than 95% similarity. These strains could be qualified candidates for an efficient bioremediation process of severally polluted soils.

A comparative study on chemical characterization and properties of surface active compounds from Gram-positive Bacillus and Gram-negative Ochrobactrum strains utilizing pure hydrocarbons and waste mineral lubricating oils

Mineral lubricating oils are widely used in various industrial sectors for their applications in maintenance and functioning of machineries. However, indiscriminate dumping of these used oils have resulted in polluting the natural reservoirs which subsequently destroys ecological balance. Bacteria can emulsify or lower surface tension between phases of immiscible substrates and can acquire them as their carbon and energy sources. Such a phenomenon is mediated by production of extracellular polymers which can function as eminent surface active compounds based on their surfactant or emulsifying nature. The comparison between bacterial strains (Gram-positive Bacillus stratosphericus A15 and Gram-negative Ochrobactrum pseudintermedium C1) on utilization of pure straight chain hydrocarbons, waste mineral lubricating oils as sole carbon source and chemical characterization of the synthesized surface active compounds were studied. Characterization analysis by Ultraviolet Visible spectrophotometry, Fourier transform infrared spectroscopy, Nuclear Magnetic Resonance spectroscopy, Carbon-Hydrogen-Nitrogen analysis has given detailed structural elucidation of surface active compounds. The contrasting nature of bacterial strains in utilization of different hydrocarbons of waste mineral lubricating oils was observed in Gas Chromatography-Mass Spectroscopy analysis. The variation between both strains in utilization of hydrocarbons can be manifested in chemical structural differences and properties of the produced surface active compounds. Scanning Electron Microscopy has given detailed insight into the microstructural difference of the compounds. The utilization of lubricating oils can address waste disposal problem and offer an economical feasible approach for bacterial production of surface active compounds. Our results suggest that these surface active compounds can maneuver applications in environmental bioremediation and agriculture, pharmaceuticals and food as functional biomaterials.

What Is New in the Field of Industrial Wastes Conversion into Polyhydroxyalkanoates by Bacteria?

The rising global consumption and industrialization has resulted in increased food processing demand. Food industry generates a tremendous amount of waste which causes serious environmental issues. These problems have forced us to create strategies that will help to reduce the volume of waste and the contamination to the environment. Waste from food industries has great potential as substrates for value-added bioproducts. Among them, polyhydroxyalkanaotes (PHAs) have received considerable attention in recent years due to their comparable characteristics to common plastics. These biodegradable polyesters are produced by microorganisms during fermentation processes utilizing various carbon sources. Scale-up of PHA production is limited due to the cost of the carbon source metabolized by the microorganisms. Therefore, there is a growing need for the development of novel microbial processes using inexpensive carbon sources. Such substrates could be waste generated by the food industry and food service. The use of industrial waste streams for PHAs biosynthesis could transform PHA production into cheaper and more environmentally friendly bioprocess. This review collates in detail recent developments in the biosynthesis of various types of PHAs produced using waste derived from agrofood industries. Challenges associated with this production bioprocess were described, and new ways to overcome them were proposed.

Antimicrobial Activity of Lipopeptide Biosurfactants Against Foodborne Pathogen and Food Spoilage Microorganisms and Their Cytotoxicity

Lipopeptide biosurfactants produced by Bacillus sp. were assessed regarding their antimicrobial activity against foodborne pathogenic and food spoilage microorganisms. Both Gram-positive and Gram-negative bacteria were found not to be susceptible to these lipopeptides. However, mycosubtilin and mycosubtilin/surfactin mixtures were very active against the filamentous fungi Paecilomyces variotti and Byssochlamys fulva, with minimum inhibitory concentrations (MICs) of 1-16 mg/L. They were also active against Candida krusei, MIC = 16-64 mg/L. Moreover it was found that the antifungal activity of these lipopeptides was not affected by differences in isoform composition and/or purity. Furthermore their cytotoxicity tested on two different cell lines mimicking ingestion and detoxification was comparable to those of approved food preservatives such as nisin. Overall, for the first time here mycosubtilin and mycosubtilin/surfactin mixtures were found to have high antifungal activity against food relevant fungi at concentrations lower than their toxicity level hence, suggesting their application for extending the shelf-life of products susceptible to these moulds. In addition combining nisin with mycosubtilin or mycosubtiliin/surfactin mixtures proved to be an effective approach to produce antimicrobials with broader spectrum of action.

Microbial biosurfactant research: time to improve the rigour in the reporting of synthesis, functional characterization and process development

The demand for microbially produced surface-active compounds for use in industrial processes and products is increasing. As such, there has been a comparable increase in the number of publications relating to the characterization of novel surface-active compounds: novel producers of already characterized surface-active compounds and production processes for the generation of these compounds. Leading researchers in the field have identified that many of these studies utilize techniques are not precise and accurate enough, so some published conclusions might not be justified. Such studies lacking robust experimental evidence generated by validated techniques and standard operating procedures are detrimental to the field of microbially produced surface-active compound research. In this publication, we have critically reviewed a wide range of techniques utilized in the characterization of surface-active compounds from microbial sources: identification of surface-active compound producing microorganisms and functional testing of resultant surface-active compounds. We have also reviewed the experimental evidence required for process development to take these compounds out of the laboratory and into industrial application. We devised this review as a guide to both researchers and the peer-reviewed process to improve the stringency of future studies and publications within this field of science.

Critical overview of biomass feedstocks as sustainable substrates for the production of polyhydroxybutyrate (PHB)

Polyhydroxybutyrates (PHBs) are a class of biopolymers produced by different microbial species and are biodegradable and biocompatible in nature as opposed to petrochemically derived plastics. PHBs have advanced applications in medical sector, packaging industries, nanotechnology and agriculture, among others. PHB is produced using various feedstocks such as glycerol, dairy wastes, agro-industrial wastes, food industry waste and sugars. Current focus on PHB research has been primarily on reducing the cost of production and, on downstream processing to isolate PHB from cells. Recent advancements to improve the productivity and quality of PHB include genetic modification of producer strain and modification of PHB by blending to develop desirable properties suited to diversified applications. Selection of feedstock plays a critical role in determining the economic feasibility and sustainability of the process. This review provides a bird's eye view of the suitability of different waste resources for producing polyhydroxybutyrate; providing state-of the art information and analysis.

Insights into the effect of different levels of crude oil on hydrolyzed polyacrylamide biotransformation in aerobic and anoxic biosystems: Bioresource production, enzymatic activity, and microbial function

The differences of crude oil recovery ratio resulted in different levels of crude oil in actual hydrolyzed polyacrylamide (HPAM)-containing wastewater. The effect of crude oil on HPAM biotransformation was explored from bioresource production, enzymatic activity and microbial function. In aerobic biosystems, the highest polyhydroxyalkanoate (PHA) yield (19.6%-40.2%) and dehydrogenase (DH) activity (4.06-8.32 mg·g^-1 VSS) occurred in the 48th hour, and increased with crude oil concentration (0-400 mg·L^-1). In anoxic biosystems, the highest PHA yield (24.5%-50.5%) and DH activity (3.24-6.69 mg·g^-1 VSS) occurred in the 72nd hour, and increased with crude oil concentration. The higher substrate removal (38.5%-65.7%) occurred in aerobic biosystems, while the higher PHA accumulation occurred in anoxic biosystems. PHA yield, DH activity and HPAM removal were related. Microbial function related to HPAM biodegradation and PHA synthesis was discussed. The main function of Pseudomonas and Bacillus in aerobic biosystems was to degrade HPAM, and in anoxic biosystems was to synthesize PHA.