Bioconversion of kitchen wastes into bioflocculant and its pilot-scale application in treating iron mineral processing wastewater

Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF). The PBF generated from this bacterium shows promising efficacy in effectively flocculating NMPs. Subsequently, the precipitated flocs (NMPs + PBF) were utilized as sustainable feedstock for synthesizing PBF. The study yielded 6.91 g/L PBF under optimum conditions. Genome sequencing analysis was conducted to study the mechanisms of PBF synthesis and nylon-6,6 degradation. The PBF exhibited impressive flocculating capacity of 90.1 mg/g of PBF when applied to 0.01 mm NMPs, aided by the presence of Ca2+. FTIR and XPS analysis showed the presence of hydroxyl, carboxyl, and amine groups in PBF. The flocculation performance of PBF conformed to Langmuir isotherm and pseudo-first-order adsorption kinetics model. These findings present a promising approach for reducing the production costs of PBF by utilizing NMPs as sustainable nutrient sources.

Potential Application Performance of Hydrochar from Kitchen Waste: Effects of Salt, Oil, Moisture, and pH

The surge in kitchen waste production is causing food-borne disease epidemics and is a public health threat worldwide. Additionally, the effectiveness of conventional treatment approaches may be hampered by KW's high moisture, salt, and oil content. Hydrothermal carbonization (HTC) is a promising new technology to convert waste biomass into environmentally beneficial derivatives. This study used simulated KW to determine the efficacy of hydrothermal derivatives (hydrochar) with different salt and oil content, pH value, and solid-liquid ratio for the removal of cadmium (Cd) from water and identify their high heating value (HHV). The findings revealed that the kitchen waste hydrochar (KWHC) yield decreased with increasing oil content. When the water content in the hydrothermal system increased by 90%, the yield of KWHC decreased by 65.85%. The adsorption capacity of KWHC remained stable at different salinities. The KWHC produced in the acidic environment increases the removal efficiency of KWHC for Cd. The raw material was effectively transformed into a maximum HHV (30.01 MJ/kg). HTC is an effective and secure method for the resource utilization of KW based on the adsorption capacity and combustion characteristic indices of KWHC.

Addition of exogenous microbial agents increases hydrogen sulfide emissions during aerobic composting of kitchen waste by improving bio-synergistic effects

The effect of microbial agents (MA) on hydrogen sulfide (H₂S) emissions in the compost is still a controversial issue. This study examined the effects and microbial mechanisms of MA on H₂S emissions during the composting of kitchen waste. The results showed that MA addition can promote sulfur conversion to elevate H₂S emissions by approximately 1.6 ∼ 2.8 times. Structural equations demonstrated that microbial community structure was the dominant driver on H₂S emissions. Agents reshaped the compost microbiome, showing more microorganisms participated in sulfur conversion, and enhanced the connection between microorganisms and functional genes. The relative abundance of keystone species associated with H₂S emissions increased after adding MA. Particularly, the sulfite and sulfate reduction processes were intensified, as evidenced by an increasing in the abundance and pathways cooperation of sat and asrA after MA addition. The outcome provides deeper insights into MA on regulating the mitigation of H₂S emissions in compost.

Functional identification of two novel carbohydrate-binding modules of glucuronoxylanase CrXyl30 and their contribution to the lignocellulose saccharification

BACKGROUND

Glycoside hydrolase (GH) family 30 xylanases are a distinct group of xylanases, most of which have a highly specific catalytic activity for glucuronoxylan. Since GH30 xylanases do not normally carry carbohydrate-binding modules (CBMs), our knowledge of the function of their CBMs is lacking.

RESULTS

In this work, the CBM functions of CrXyl30 were investigated. CrXyl30 was a GH30 glucuronoxylanase containing tandem CBM13 (CrCBM13) and CBM2 (CrCBM2) at its C terminus, which was identified in a lignocellulolytic bacterial consortium previously. Both CBMs could bind insoluble and soluble xylan, with CrCBM13 having binding specificity for the xylan with L-arabinosyl substitutions, whereas CrCBM2 targeted L-arabinosyl side chains themselves. Such binding abilities of these two CBMs were completely different from other CBMs in their respective families. Phylogenetic analysis also suggested that both CrCBM13 and CrCBM2 belong to novel branches. Inspection of the simulated structure of CrCBM13 identified a pocket that just accommodates the side chain of 3(2)-alpha-L-arabinofuranosyl-xylotriose, which forms hydrogen bonds with three of the five amino acid residues involved in ligand interaction. The truncation of either CrCBM13 or CrCBM2 did not alter the substrate specificity and optimal reaction conditions of CrXyl30, whereas truncation of CrCBM2 decreased the k_cat/K_m value by 83% (± 0%). Moreover, the absence of CrCBM2 and CrCBM13 resulted in a 5% (± 1%) and a 7% (± 0%) decrease, respectively, in the amount of reducing sugar released by the synergistic hydrolysis of delignified corncob whose hemicellulose is arabinoglucuronoxylan, respectively. In addition, fusion of CrCBM2 with a GH10 xylanase enhanced its catalytic activity against the branched xylan and improved the synergistic hydrolysis efficiency by more than fivefold when delignified corncob was used as substrate. Such a strong stimulation of hydrolysis resulted from the enhancement of hemicellulose hydrolysis on the one hand, and the cellulose hydrolysis is also improved according to the lignocellulose conversion rate measured by HPLC.

CONCLUSIONS

This study identifies the functions of two novel CBMs in CrXyl30 and shows the good potential of such CBMs specific for branched ligands in the development of efficient enzyme preparations.

Coupling network of hydrogen sulfide precursors and bacteria in kitchen waste composting

This study was focused on the changes of hydrogen sulfide (H₂S), its precursors, and microorganisms associated with its transformation during the composting process of kitchen waste. The results showed that the content of cysteine (Cys) and methionine (Met) decreased by 32.3 % and 57.5 % respectively, while the content of sulfate (SO₄^2-) changed little during composting. The main release period of H₂S was during the high-temperature period of composting, Cys was its main precursor. Based on network analysis, a total of 15 core genera associated with the conversion of H₂S precursors were identified, and the transformation of the H₂S precursor was mainly influenced by Filomicrobium. Temperature, pH, and TN levels had a positive effect on Filomicrobium. It could find a balance point by controlling these three factors to reduce the production of H₂S.

A bioflocculant from Corynebacterium glutamicum and its application in acid mine wastewater treatment

Although many microorganisms have been found to produce bioflocculants, and bioflocculants have been considered as attractive alternatives to chemical flocculants in wastewater treatment, there are few reports on bioflocculants from the safe strain C. glutamicum, and the application of bioflocculants in acid wastewater treatment is also rare attributed to the high content of metal ions and high acidity of the water. In this study, a novel bioflocculant produced by Corynebacterium glutamicum Cg1-P30 was investigated. An optimal production of this bioflocculant with a yield of 0.52 g/L was achieved by Box-Behnken design, using 12.20 g/L glucose, 4.00 g/L corn steep liquor and 3.60 g/L urea as carbon and nitrogen source. The structural characterization revealed that the bioflocculant was mainly composed of 37.50% neutral sugar, 10.03% uronic acid, 6.32% aminosugar and 16.51% protein. Carboxyl, amine and hydroxyl groups were the functional groups in flocculation. The biofocculant was thermally stable and dependent on metal ions and acidic pH, showing a good flocculating activity of 91.92% at the dosage of 25 mg/L by aid of 1.0 mM Fe³⁺ at pH 2.0. Due to these unique properties, the bioflocculant could efficiently remove metal ions such as Fe, Al, Zn, and Pb from the real acid mine wastewater sample without pH adjustment, and meanwhile made the acid mine wastewater solution become clear with an increased neutral pH. These findings suggested the great potential application of the non-toxic bioflocculant from C. glutamicum Cg1-P30 in acid mine wastewater treatment.

Bioconversion of biowaste into renewable energy and resources: A sustainable strategy

Due to its high amount of organic and biodegradable components that can be recycled, biowaste is not only a major cause of environmental contamination, but also a vast store of useful materials. The transformation of biowaste into energy and resources via biorefinery is an unavoidable trend, which could aid in reducing carbon emissions and alleviating the energy crisis in light of dwindling energy supplies and mounting environmental difficulties related with solid waste. In addition, the current pandemic and the difficult worldwide situation, with their effects on the economic, social, and environmental aspects of human life, have offered an opportunity to promote the transition to greener energy and sources. In this context, the current advancements and possible trends of utilizing widely available biowaste to produce key biofuels (such as biogas and biodiesel) and resources (such as organic acid, biodegradable plastic, protein product, biopesticide, bioflocculant, and compost) are studied in this review. To achieve the goal of circular bioeconomy, it is necessary to turn biowaste into high-value energy and resources utilizing biological processes. In addition, the usage of recycling technologies and the incorporation of bioconversion to enhance process performance are analyzed critically. Lastly, this work seeks to reduce a number of enduring obstacles to the recycling of biowaste for future use in the circular economy. Although it could alleviate the global energy issue, additional study, market analysis, and finance are necessary to commercialize alternative products and promote their future use. Utilization of biowaste should incorporate a comprehensive approach and a methodical style of thinking, which can facilitate product enhancement and decision optimization through multidisciplinary integration and data-driven techniques.

Artificial consortia of Bacillus amyloliquefaciens HM618 and Bacillus subtilis for utilizing food waste to synthetize iturin A

Food waste is a cheap and abundant organic resource that can be used as a substrate for the production of the broad-spectrum antifungal compound iturin A. To increase the efficiency of food waste biotransformation, different artificial consortia incorporating the iturin A producer Bacillus amyloliquefaciens HM618 together with engineered Bacillus subtilis WB800N producing lipase or amylase were constructed. The results showed that recombinant B. subtilis WB-A13 had the highest amylase activity of 23406.4 U/mL, and that the lipase activity of recombinant B. subtilis WB-L01 was 57.5 U/mL. When strain HM618 was co-cultured with strain WB-A14, the higher yield of iturin A reached to 7.66 mg/L, representing a 32.9% increase compared to the pure culture of strain HM618. In the three-strain consortium comprising strains HM618, WB-L02, and WB-A14 with initial OD₆₀₀ values of 0.2, 0.15, and 0.15, respectively, the yield of iturin A reached 8.12 mg/L, which was 38.6% higher than the control. Taken together, artificial consortia of B. amyloliquefaciens and recombinant B. subtilis can produce an increased yield of iturin A, which provides a new strategy for the valorization of food waste.

Intensification and biorefinery approaches for the valorization of kitchen wastes - A review

Kitchen wastes (KW) are post-consumption residues from household and food service sector, heterogenous in composition and highly variable depending on the particular origin, which are often treated as municipal. There is a need to improve the management of these continuously produced and worldwidely available resources and their valorization into novel and commercially interesting products will aid in the development of bioeconomy. The successful implementation of such approach requires cooperation between academia, industrial stakeholders, public and private institutions, based on the different dimensions, including social, economic, ecologic and technological involved. This review aims at presenting a survey of technological aspects, regarding current and potential management strategies of KW, following either a single or multiproduct processing according to the biorefineries scheme. Emphasis is given to intensification tools, designed to enhance process efficiency.

Improved the lipopeptide production of Bacillus amyloliquefaciens HM618 under co-culture with the recombinant Corynebacterium glutamicum producing high-level proline

The application of antibacterial lipopeptides is limited by high cost and low yield. Herein, the exogenous L-proline significantly improved lipopeptide production by Bacillus amyloliquefaciens HM618. A recombinant Corynebacterium glutamicum producing high levels of proline using genetically modifying proB and putA was used to establish consortium, to improve lipopeptide production of strain HM618. Compared to a pure culture, the levels of iturin A, fengycin, and surfactin in consortium reached 67.75, 39.32, and 37.25 mg L^-1, respectively, an increase of 3.19-, 2.05-, and 1.63-fold over that produced by co-cultures of B. amyloliquefaciens and recombinant C. glutamicum with normal medium. Commercial amylase and recombinant Pichia pastoris with a heterologous amylase gene were used to hydrolyze kitchen waste. A three-strain consortium with recombinant P. pastoris and C. glutamicum increased the lipopeptide production of strain HM618 in medium containing KW. This work provides new strategies to improve lipopeptide production by B. amyloliquefaciens.

Fnr Negatively Regulates Prodigiosin Synthesis in Serratia sp. ATCC 39006 During Aerobic Fermentation

The well-known Crp/Fnr family regulator Fnr has long been recognized as an oxygen sensor to regulate multiple biological processes, including the switch between aerobic/anaerobic metabolism, nitrogen fixation, bioluminescence, infection, and virulence. In most cases, Fnr was found to be active under anaerobic conditions. However, its role in aerobic antibiotic metabolism has not yet been revealed. In this research, we report that in the model organism, Serratia sp. ATCC 39006, Fnr (Ser39006_013370) negatively regulates prodigiosin production by binding to the spacer between the −10 and −35 region in the promoter of prodigiosin biosynthetic gene cluster under aerobic conditions. Fnr was also shown to modulate the anti-bacterial activity and motility by regulating pathway-specific regulatory genes, indicating that Fnr acts as a global regulator in Serratia sp. ATCC 39006. For the first time, we describe that Fnr regulates antibiotic synthesis in the presence of oxygen, which expands the known physiological functions of Fnr and benefits the further investigation of this important transcriptional regulator.

Bacterial dynamics and functions driven by bulking agents to mitigate gaseous emissions in kitchen waste composting

This study investigated the impacts of different bulking agents (i.e. garden waste, cornstalks, and spent mushroom substrates) on bacterial structure and functions for gaseous emissions during kitchen waste composting. High-throughput sequencing was integrated with functional Annotation of Prokaryotic Taxa (FAPROTAX) to decipher the bacterial structure and functions. Results show that adding cornstalks constructed a more complex and mutualistic bacterial network to enhance organic biodegradation. This scenario, however, aggravated the emission of ammonia and hydrogen sulphide with the enrichment of the genus Bacillus and Desulfitibacter at the thermophilic stage of composting to facilitate ammonification and sulphur-related respiration, respectively. By contrast, spent mushroom substrates facilitated the proliferation of the genus Pseudomonas to promote nitrate reduction at the cooling stage, leading to considerable emission of nitrous oxide. Compared to these two agents, garden waste contained less easily biodegradable substances to limit bacterial mutualism, thereby reducing gaseous emissions in composting.

A critical review on various feedstocks as sustainable substrates for biosurfactants production: a way towards cleaner production

The quest for a chemical surfactant substitute has been fuelled by increased environmental awareness. The benefits that biosurfactants present like biodegradability, and biocompatibility over their chemical and synthetic counterparts has contributed immensely to their popularity and use in various industries such as petrochemicals, mining, metallurgy, agrochemicals, fertilizers, beverages, cosmetics, etc. With the growing demand for biosurfactants, researchers are looking for low-cost waste materials to use them as substrates, which will lower the manufacturing costs while providing waste management services as an add-on benefit. The use of low-cost substrates will significantly reduce the cost of producing biosurfactants. This paper discusses the use of various feedstocks in the production of biosurfactants, which not only reduces the cost of waste treatment but also provides an opportunity to profit from the sale of the biosurfactant. Furthermore, it includes state-of-the-art information about employing municipal solid waste as a sustainable feedstock for biosurfactant production, which has not been simultaneously covered in many published literatures on biosurfactant production from different feedstocks. It also addresses the myriad of other issues associated with the processing of biosurfactants, as well as the methods used to address these issues and perspectives, which will move society towards cleaner production.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Energy-saving preparation of a bioflocculant under high-salt condition by using strain Bacillus sp. and the interaction mechanism towards heavy metals

A highly efficient bioflocculant, i.e., Na-Bsp was successfully prepared by using a tolerant strain-Bacillus sp. under high-salt condition without sterilization. Salt-containing medium was not infected by other strains throughout the whole incubation period in 168 h. The as-prepared Na-Bsp was found to be cation-dependent, exhibiting high flocculant efficiency (FE) i.e., 97.69 ± 0.61%, towards kaolin particles by aid of Fe³⁺. High FE values were well maintained under a wide pH range and/or boiled water treatment, likely because of the main constituent of polysaccharide. The presence of hydroxyl, carboxyl, and amine groups on the bioflocculant surface were possibly responsible for strong interactions with heavy metals. The adsorption capacities of Pb²⁺, Cu²⁺ and Cr⁶⁺ were 1000.0, 434.8 and 384.6 mg g^-1, respectively. The changing of structure and configuration of bioflocculant during the metal adsorption were explored by the scanning electron microscope with electron energy loss spectroscopy and three-dimensional excitation-emission fluorescence spectrometry. This study provided a novel production method, whereby the conventional sterilization could be avoided, which is of great environmental significance for steam-saving. Furthermore, the as-prepared Na-Bsp exhibited high adsorption capacities toward heavy metals, which sheds lights on its potential usage as an alternative adsorbent.

Production of bioflocculant using feather waste as nitrogen source and its use in recycling of straw ash-washing wastewater with low-density and high pH property

Straw ash-washing wastewater is generated in the process of straw combustion power generation and potash fertilizer production. The suspended solid particles in straw ash-washing wastewater are hard to be settled down due to its low-density and high pH properties which inhibit the application of traditional chemical flocculants. Bioflocculant has good advantages in flocculating activity, biodegradability and adaptability of wastewater pH fluctuation. However, high production cost limited the large-scale applications of bioflocculant in wastewater treatment. In this study, the feasibility of using feather waste as cheap alternative nitrogen source of alkaliphilic Bacillus agaradhaerens C9 to produce bioflocculant was investigated. The results showed that strain C9 could simultaneously produce keratinase and bioflocculant, and thereby producing bioflocculant (named as BFF) using feather waste as cheap nitrogen source. The optimal fermentation conditions for enzymatic hydrolysis of feather waste and BFF production was 40 g/L feather wastes, 16 g/L glucose, 37 °C and pH 9.5, and the highest yield of 2.5 g/L was obtained. Moreover, BFF was used to flocculate straw ash-washing wastewater which exhibits low-density and high pH properties, and the highest flocculating rate of 93.1% was achieved when 6.0 mg/L BFF was added. This study reported for the first time that feather waste was used as inexpensive alternative nitrogen source for producing bioflocculant which could treat straw ash-washing wastewater, thereby promoting the resourceful utilization of feather waste and the reuse of straw ash-washing wastewater.

Bioconversion of citrus peel wastes into bioflocculants and their application in the removal of microcystins

In this study, the mechanism for converting citrus peel wastes (CPW) into bioflocculants using Alcaligenes faecalis subsp. phenolicus ZY-16 was analysed. The results demonstrated that the ZY-16 strain could produce various lignocellulolytic enzymes, containing cellulase, hemicellulase, pectinase, protease, and ligninase, enhancing the hydrolysis of citrus peel wastes. Molecular distillation removes antimicrobial limonene, which could inhibit bioflocculant production. The optimal fermentation conditions with the highest bioflocculant yield (3.49 g/L) were 38.79 g/L of CPW, 35.54 °C, and pH 4.48. Furthermore, the bioflocculant was used to eliminate microcystins for the first time, and the highest removal efficiency (90.05%) was achieved at a pH of 3.0, after 800 mg/L of bioflocculant was added into the microcystins solution (10 mg/L) for 60 min. Therefore, this paper demonstrated that CPW could be a cost-effective feedstock for the production of bioflocculants, which have potential application in microcystin removal.

Microbial strategies for bio-transforming food waste into resources

With the changing life-style and rapid urbanization of global population, there is increased generation of food waste from various industrial, agricultural, and household sources. According to Food and Agriculture Organization (FAO), almost one-third of the total food produced annually is wasted. This poses serious concern as not only there is loss of rich resources; their disposal in environment causes concern too. Food waste is rich in organic, thus traditional approaches of land-filling and incineration could cause severe environmental and human health hazard by generating toxic gases. Thus, employing biological methods for the treatment of such waste offers a sustainable way for valorization. This review comprehensively discusses state-of-art knowledge about various sources of food waste generation, their utilization, and valorization by exploiting microorganisms. The use of microorganisms either aerobically or anaerobically could be a sustainable and eco-friendly solution for food waste management by generating biofuels, electrical energy, biosurfactants, bioplastics, biofertilizers, etc.