Evolutionary engineering of Lactobacillus pentosus improves lactic acid productivity from xylose-rich media at low pH

Bioprocesses for lactic acid production from organic wastes toward industrialization-a critical review

Lactic acid (LA) is a crucial chemical which has been widely used for industrial application. Microbial fermentation is the dominant pathway for LA production and has been regarded as the promising technology. In recent years, many studies on LA production from various organic wastes have been published, which provided alternative ways to reduce the LA production cost, and further recycle organic wastes. However, few researchers focused on industrial application of this technology due to the knowledge gap and some uncertainties. In this review, the recent advances, basic knowledge and limitations of LA fermentation from organic wastes are discussed, the challenges and suitable envisaged solutions for enhancing LA yield and productivity are provided to realize industrial application of this technology, and also some perspectives are given to further valorize the LA fermentation processes from organic wastes. This review can be a useful guidance for industrial LA production from organic wastes on a sustainable view.

Breeding of high-tolerance yeast by adaptive evolution and high-gravity brewing of mutant

BACKGROUND

Ethanol and osmotic stresses are the major limiting factors for brewing strong beer with high-gravity wort. Breeding of yeast strains with high osmotic and ethanol tolerance and studying very-high-gravity (VHG) brewing technology is of great significance for brewing strong beer.

RESULTS

This study used an optimized microbial microdroplet culture (MMC) system for adaptive laboratory evolution (ALE) of Saccharomyces cerevisiae YN81 to improve its tolerance to osmotic and ethanol stress. Meanwhile, we investigated the VHG and VHG with added ethanol (VHGAE) brewing processes for the evolved mutants in brewing strong beer. The results showed that three evolved mutants were obtained; among them, the growth performance of YN81mc-8.3 under 300, 340, 380, 420 and 460 g L-1 sucrose stresses was greater than that of the other strains. The ethanol tolerance of YN81mc-8.3 was 12%, which was 20% higher than that of YN81. During strong-beer brewing in a 100 L cylindrical cone-bottom tank, the sugar utilization and ethanol yield of YN81mc-8.3 outperformed those of YN81 in both the VHG and VHGAE brewing processes. Measurement of the diacetyl concentration showed that YN81mc-8.3 had a stronger diacetyl reduction ability; in particular, the real degree of fermentation of beers brewed by YN81mc-8.3 in VHG and VHGAE brewing processes was 75.35% and 66.71%, respectively - higher than those of the two samples brewed by YN81. Meanwhile, the visual, olfactive and gustative properties of the strong beer produced by YN81mc-8.3 were better than those of the other beers.

CONCLUSION

In this study, the mutant YN81mc-8.3 and the VHGAE brewing process were optimal and represented a better alternative strong-beer brewing process. © 2023 Society of Chemical Industry.

Exploitation of microbial activities at low pH to enhance planetary health

Awareness is growing that human health cannot be considered in isolation but is inextricably woven with the health of the environment in which we live. It is, however, under-recognized that the sustainability of human activities strongly relies on preserving the equilibrium of the microbial communities living in/on/around us. Microbial metabolic activities are instrumental for production, functionalization, processing, and preservation of food. For circular economy, microbial metabolism would be exploited to produce building blocks for the chemical industry, to achieve effective crop protection, agri-food waste revalorization, or biofuel production, as well as in bioremediation and bioaugmentation of contaminated areas. Low pH is undoubtedly a key physical-chemical parameter that needs to be considered for exploiting the powerful microbial metabolic arsenal. Deviation from optimal pH conditions has profound effects on shaping the microbial communities responsible for carrying out essential processes. Furthermore, novel strategies to combat contaminations and infections by pathogens rely on microbial-derived acidic molecules that suppress/inhibit their growth. Herein, we present the state-of-the-art of the knowledge on the impact of acidic pH in many applied areas and how this knowledge can guide us to use the immense arsenal of microbial metabolic activities for their more impactful exploitation in a Planetary Health perspective.

Heterotypic stress-induced adaptive evolution enhances freeze-drying tolerance and storage stability of Leuconostoc mesenteroides WiKim33

Lactic acid bacteria (LAB) are currently being investigated for their potential use as probiotics and starter cultures. Researchers have developed powdering processes for the commercialization of LAB. Previous studies have focused on identifying innovative cryoprotective agents and freeze-drying (FD) techniques to enhance the stability of LAB. In this study, adaptive laboratory evolution (ALE) was employed to develop a strain with high FD tolerance and enhanced storage stability. Leuconostoc mesenteroids WiKim33 was subjected to heterotypic shock (heat and osmosis shock) to induce the desired phenotype and genotype. An FD-tolerant enhanced Leu. mesenteroides WiKim33 strain (ALE50) was obtained, which harbored a modified fatty acid composition and cell envelope characteristics. Specifically, ALE50 showed a lower unsaturated fatty acid (UFA)/saturated fatty acid (SFA) ratio and a higher cyclic fatty acid (CFA) composition. Moreover, the exopolysaccharide (EPS) thickness increased significantly by 331% compared to that of the wild type (WT). FD tolerance, which was evaluated using viability testing after FD, was enhanced by 33.4%. Overall, we demonstrated the feasibility of ALE to achieve desirable characteristics and provided insights into the mechanisms underlying increased FD tolerance.

Adaptive laboratory evolution under acetic acid stress enhances the multistress tolerance and ethanol production efficiency of Pichia kudriavzevii from lignocellulosic biomass

Second-generation bioethanol production using lignocellulosic biomass as feedstock requires a highly efficient multistress-tolerant yeast. This study aimed to develop a robust yeast strain of P. kudriavzevii via the adaptive laboratory evolution (ALE) technique. The parental strain of P. kudriavzevii was subjected to repetitive long-term cultivation in medium supplemented with a gradually increasing concentration of acetic acid, the major weak acid liberated during the lignocellulosic pretreatment process. Three evolved P. kudriavzevii strains, namely, PkAC-7, PkAC-8, and PkAC-9, obtained in this study exhibited significantly higher resistance toward multiple stressors, including heat, ethanol, osmotic stress, acetic acid, formic acid, furfural, 5-(hydroxymethyl) furfural (5-HMF), and vanillin. The fermentation efficiency of the evolved strains was also improved, yielding a higher ethanol concentration, productivity, and yield than the parental strain, using undetoxified sugarcane bagasse hydrolysate as feedstock. These findings provide evidence that ALE is a practical approach for increasing the multistress tolerance of P. kudriavzevii for stable and efficient second-generation bioethanol production from lignocellulosic biomass.

Hydraulic Retention Time as an Operational Tool for the Production of Short-Chain Carboxylates via Anaerobic Fermentation of Carbohydrate-Rich Waste

The carboxylate platform is a sustainable and cost-effective way to valorize wastes into biochemicals that replace those of fossil origin. Short-chain fatty acids (SCFAs) are intermediates generated during anaerobic fermentation (AF) and are considered high-value-added biochemicals among carboxylates. This investigation aimed to produce SCFAs through the AF of sugar beet molasses at 25 °C and semi-continuous feeding mode in completely stirred tank reactors. A particular focus was devoted to the role of hydraulic retention time (HRT) variation in SCFAs production and distribution profile. The highest SCFAs concentration (44.1 ± 2.3 gCOD/L) was reached at the HRT of 30 days. Caproic acid accounted for 32.5-35.5% (COD-concentration basis) at the long HRTs of 20 and 30 days due to the carbon chain elongation of shorter carboxylic acids. The findings of this study proved that HRT could be used to steer the anaerobic process toward the targeted SCFAs for specific uses. Furthermore, the successful operation at low-temperature conditions (i.e., 25 °C) makes the process economically promising.

Improving lactic acid yield of hemicellulose from garden garbage through pretreatment of a high solid loading coupled with semi-hydrolysis using low enzyme loading

Byproduct (acetate and ethanol) generation and carbon catabolite repression are two critical impediments to lactic acid production from the hemicellulose of lignocellulosic biomass. To reduce byproduct generations, acid pretreatment with high solid loading (solid-liquid ratio 1:7) of garden garbage was conducted. The byproduct yield was only 0.30 g/g during in the subsequent lactic acid fermentation from acid pretreatment liquid and 40.8% lower than that of low solid loading (0.48 g/g). Furthermore, semi-hydrolysis with low enzyme loading (10 FPU/g garden garbage cellulase) was conducted to regulate and reduce glucose concentration in the hydrolysate, thereby relieving carbon catabolite repression. During the lactic acid fermentation process, the xylose conversion rate was restored from 48.2% (glucose-oriented hydrolysis) to 85.7%, eventually achieving a 0.49 g/g lactic acid yield of hemicellulose. Additionally, RNA-seq revealed that semi-hydrolysis with low enzyme loading down-regulated the expression of ptsH and ccpA, thereby relieving carbon catabolite repression.

Rapid adaptive evolution of Bacillus coagulans to undetoxified corncob hydrolysates for lactic acid production and new insights into its high phenolic degradation

Here, an adapted Bacillus coagulans (Weizmannia coagulans) strain CC17B-1 was developed for lignocellulosic lactic acid production through a short and rapid adaptive laboratory evolution technique. Without any detoxification, two actual corn cob hydrolysates from the factory were effectively fermented to lactic acid within 60 h. Strain CC17B-1 is capable of degrading all nine determined phenolic compounds in the hydrolysate, with the only exception being vanillic acid. Notably, its tolerances for ferulic acid and p-coumaric acid are the highest doses reported in anaerobic microbes. A proposed degradation pathway showed that strain CC17B-1 could convert phenolic aldehydes to phenolic alcohol and then further degrade them completely. This work provides new ideas for the microbe phenolic degradation pathway and paves the way for industrial lactic acid production from lignocellulosic biomass.

Fermentative valorisation of xylose-rich hemicellulosic hydrolysates from agricultural waste residues for lactic acid production under non-sterile conditions

Lactic acid (LA) is a platform chemical with diverse industrial applications. Presently, commercial production of LA is dominated by microbial fermentation using sugary or starch-based feedstocks. Research pursuits emphasizing towards sustainable production of LA using non-edible and renewable feedstocks have accelerated the use of lignocellulosic biomass (LCB). The present study focuses on the valorisation of xylose derived from sugarcane bagasse (SCB) and olive pits (OP) through hydrothermal and dilute acid pretreatment, respectively. The xylose-rich hydrolysate obtained was used for LA production by homo-fermentative and thermophilic Bacillus coagulans DSM2314 strain under non-sterile conditions. The fed-batch mode of fermentation resulted in maximum LA titers of 97.8, 52.4 and 61.3 g/L with a yield of 0.77, 0.66 and 0.71 g/g using pure xylose, xylose-rich SCB and OP hydrolysates, respectively. Further, a two-step aqueous two-phase system (ATPS) extraction technique was employed for the separation and recovery of LA accumulated on pure and crude xylose. The LA recovery was 45 - 65% in the first step and enhanced to 80-90% in the second step.The study demonstrated an efficient integrated biorefinery approach to valorising the xylose-rich stream for cost-effective LA production and recovery.

Adaptive Laboratory Evolution of Microorganisms: Methodology and Application for Bioproduction

Adaptive laboratory evolution (ALE) is a useful experimental methodology for fundamental scientific research and industrial applications to create microbial cell factories. By using ALE, cells are adapted to the environment that researchers set based on their objectives through the serial transfer of cell populations in batch cultivations or continuous cultures and the fitness of the cells (i.e., cell growth) under such an environment increases. Then, omics analyses of the evolved mutants, including genome sequencing, transcriptome, proteome and metabolome analyses, are performed. It is expected that researchers can understand the evolutionary adaptation processes, and for industrial applications, researchers can create useful microorganisms that exhibit increased carbon source availability, stress tolerance, and production of target compounds based on omics analysis data. In this review article, the methodologies for ALE in microorganisms are introduced. Moreover, the application of ALE for the creation of useful microorganisms as cell factories has also been introduced.

A novel nonlinear sliding mode observer to estimate biomass for lactic acid production

This study deals with the problem of estimating the amount of biomass and lactic acid concentration in a lactic acid production process. A continuous stirred tank bioreactor was used for the culture of Lactobacillus helveticus. A nonlinear sliding mode observer is proposed and designed, which gives an estimate of both the biomass and lactic acid concentrations as a function of glucose uptake from the culture medium. Numerical results are given to illustrate the effectiveness of the proposed observer against a standard sliding-mode observer. It was found that the proposed observer worked very well for the benchmark bioreactor model. Also, the numerical results indicated that the proposed estimation methodology was robust to the uncertainties associated with un-modelled dynamics. These new sensing technologies, when coupled to software models, improve performance for smart process control, monitoring, and prediction.

Engineered Microbial Cell Factories for Sustainable Production of L-Lactic Acid: A Critical Review

With the increasing demand for the biodegradable polymer material polylactic acid and its advantage of being metabolized by the human body, L-lactic acid (L-LA) is becoming increasingly attractive in environmental protection and food industry applications. However, the supply of L-LA is not satisfied, and the price is still high. Compared to enzymatic and chemical synthesis methods, L-LA production by microbial fermentation has the advantages of low cost, large yield, simple operation, and environmental protection. This review summarizes the advances in engineering microbial cell factories to produce L-LA. First, the synthetic pathways and microorganisms for L-LA production are outlined. Then, the metabolic engineering strategies for constructing cell factories to overproduce L-LA are summarized and fermentation modes for L-LA production are also given. Finally, the challenges and prospects of the microbial production of L-LA are discussed. This review provides theoretical guidance for researchers engaged in L-LA production.

Lactic acid production from food waste hydrolysate by Lactobacillus pentosus: Focus on nitrogen supplementation, initial sugar concentration, pH, and fed-batch fermentation

Lactic acid production from food waste via fermentation is environmentally sustainable. However, the characteristics of food waste fermentation to produce lactic acid are not well understood due to the complexity of food waste. This study aims to understand the effects of key variables on the characteristics of food waste fermentation to maximize lactic acid production. Food waste was enzymatically hydrolyzed and fermented by Lactobacillus pentosus. Key fermentation variables, including nitrogenous nutrient supplementation, initial sugar concentration, and pH, were investigated in batch fermentation to unveil their effects on fermentation titer, yield, and productivity. The results showed that supplementation of 0.25% (w/v%) yeast extract and peptone to the food waste fermentation media significantly improved fermentation titer and productivity, but further increase in the supplementation level did not improve fermentation. Increasing the initial sugar concentration from 40 g/L to 100 g/L increased the fermentation titer from 41.0 g/L to 93.0 g/L and productivity from 0.34 g/L/h to 0.76 g/L/h. pH 6.0 was the optimal pH for the fermentation. At the optimal conditions, food waste fermentation resulted in the highest fermentation titer, yield, and productivity of 106.7 g/L, 1.12 g/g, and 3.09 g/L/h, respectively. The high fermentation yield of 1.12 g/g might be explained by the extra lactic acid production from unidentified compounds in food waste hydrolysates. By applying fed-batch fermentation, the lactic acid concentration reached 157.0 g/L with a yield and overall productivity of 0.92 g/g and 2.0 g/L/h, respectively. Based on the mass balance, a total of 251 kg lactic acid was produced from 1000 kg food waste. PRACTICAL APPLICATION: Food waste is one of the largest municipal solid wastes in the US, and most food waste ends up in landfills, causing significant economic losses and environmental concerns. In this study, we developed a fermentation process to convert food waste into biorenewable lactic acid and demonstrated that food waste is a superior feedstock for fermentation due to its embedded nutrients. Moreover, due to the embedded nutrients in food waste, the supplementation of yeast extract and peptone to fermentation can be reduced by over 50%, which can reduce the operating cost of lactic acid fermentation on an industrial scale.

Fermentative Lactic Acid Production From Lignocellulosic Feedstocks: From Source to Purified Product

The second (lignocellulosic biomass and industrial wastes) and third (algal biomass) generation feedstocks gained substantial interest as a source of various value-added chemicals, produced by fermentation. Lactic acid is a valuable platform chemical with both traditional and newer applications in many industries. The successful fractionation, separation, and hydrolysis of lignocellulosic biomass result in sugars' rich raw material for lactic acid fermentation. This review paper aims to summarize the investigations and progress in the last 5 years in lactic acid production from inexpensive and renewable resources. Different aspects are discussed-the type of raw materials, pretreatment and detoxification methods, lactic acid-producers (bacteria, fungi, and yeasts), use of genetically manipulated microorganisms, separation techniques, different approaches of process organization, as well as main challenges, and possible solutions for process optimization.

Increasing Acid Tolerance of an Engineered Lactic Acid Bacterium Pediococcus acidilactici for L-Lactic Acid Production

Acid tolerance of the lactic acid bacterium (LAB) is crucially important for the production of free lactic acid as a chemical monomer by simplified purification steps. This study conducts both metabolic modification and adaptive evolution approaches on increasing the acid tolerance of an engineered Pediococcus acidilactici strain. The overexpression of the genes encoding lactate dehydrogenase, recombinase, chaperone, glutathione and ATPase did not show the observable changes in acid tolerance. On the other hand, the low pH adaptive evolution showed clear improvement. The L-lactic acid generation and cell viability of the adaptively evolved P. acidilactici were doubled at low pH up to 4.0 when wheat straw was used as carbohydrate feedstock. However, the further decrease in pH value close to the pKa (3.86) of lactic acid led to a dramatic reduction in L-lactic acid generation. This result shows a partially successful approach on improving the acid tolerance of the lactic acid bacterium P. acidilactici.

Enhanced fermentative lactic acid production from source-sorted organic household waste: Focusing on low-pH microbial adaptation and bio-augmentation strategy

Lactic acid (LA) production at low pH could significantly reduce the need for neutralizing agents, leading to reduction of operational costs. In the present study, LA production at acidic conditions was investigated using source-sorted organic household waste (SSOHW). Controlling the pH at low value (i.e. 5.0) and bio-augmenting with Pediococcus acidilactici led to a concentration of 39.3 ± 0.5 g_-LA/L with a yield of 0.75 ± 0.02 g_-LA/g_-sugar. In contrast, secondary fermentation at higher pH level (i.e. 5.5 and 6.0) resulted in complete LA degradation. Subsequently, consecutive batch fermentations were conducted to adapt P. acidilactici to SSOHW and improve the LA production. Results showed that P. acidilactici could successively adapt in the SSOHW reaching a relative abundance above 2.8% at adaptation process. The added P. acidilactici ensured a high concentration of LA at three consecutive generations, achieving an increment above 18% compared to control test (abiotic augmentation). Moreover, adaptation processes (i.e. maintaining pH at 4.0 or stepwise decreasing the pH from 5.0 to 4.0) significantly improved LA concentration and productivity at the pH of 4.0. Overall, the results provide a promising method to reduce the LA production costs using residual resources.

Hydrothermal pretreatment of lignocellulosic biomass for hemicellulose recovery

The hemicellulosic fraction recovery is of interest for integrated processes in biorefineries, considering the possibility of high economic value products produced from their structural compounds of this polysaccharide. However, to perform an efficient recovery, it is necessary to use biomass fractionation techniques, and hydrothermal pretreatment is highlighted as a valuable technique in the hemicellulose recovery by applying high temperatures and pressure, causing dissolution of the structure. Considering the possibility of this pretreatment technique for current approaches to hemicellulose recovery, this article aimed to explore the relevance of hydrothermal pretreatment techniques (sub and supercritical water) as a strategy for recovering the hemicellulosic fraction from lignocellulosic biomass. Discussions about potential products to be generated, current market profile, and perspectives and challenges of applying the technique are also addressed.

Growth-coupled evolution and high-throughput screening assisted rapid enhancement for amylase-producing Bacillus licheniformis

Bacillus licheniformis α-amylase is a thermostable enzyme used in industrial starch hydrolysis. However, difficulties in the genetic manipulation of B. licheniformis hamper further enhancement of α-amylase production. In this regard, adaptive evolution is a useful strategy for promoting the productivity of microbial hosts, although the success of this approach requires the application of suitable evolutionary stress. In this study, we designed a growth-coupled adaptive evolution model to enrich B. licheniformis strains with enhanced amylase productivity and utilization capacity of starch substrates. Single cells of high α-amylase-producing B. licheniformis were isolated using a droplet-based microfluidic platform. Clones with 67% higher α-amylase yield were obtained and analyzed by genome resequencing. Our findings confirmed that growth-coupled evolution combined with high-throughput screening is an efficient strategy for enhanced α-amylase production. In addition, we identified several potential target genes to guide further modification of the B. licheniformis host for efficient protein expression.

Rapid Enabling of Gluconobacter oxydans Resistance to High D-Sorbitol Concentration and High Temperature by Microdroplet-Aided Adaptive Evolution

Gluconobacter oxydans is important in the conversion of D-sorbitol into l-sorbose, which is an essential intermediate for industrial-scale production of vitamin C. In a previous study, the strain G. oxydans WSH-004 could directly produce 2-keto-l-gulonic acid (2-KLG). However, its D-sorbitol tolerance was poor compared with that of other common industrial G. oxydans strains, which grew well in the presence of more than 200 g/L of D-sorbitol. This study aimed to use the microbial microdroplet culture (MMC) system for the adaptive evolution of G. oxydans WSH-004 so as to improve its tolerance to high substrate concentration and high temperature. A series of adaptively evolved strains, G. oxydans MMC1-MMC10, were obtained within 90 days. The results showed that the best strain MMC10 grew in a 300 g/L of D-sorbitol medium at 40°C. The comparative genomic analysis revealed that genetic changes related to increased tolerance were mainly in protein translation genes. Compared with the traditional adaptive evolution method, the application of microdroplet-aided adaptive evolution could improve the efficiency in terms of reducing time and simplifying the procedure for strain evolution. This research indicated that the microdroplet-aided adaptive evolution was an effective tool for improving the phenotypes with undemonstrated genotypes in a short time.

Recent Advances in Lactic Acid Production by Lactic Acid Bacteria

Lactic acid can synthesize high value-added chemicals such as poly lactic acid. In order to further minimize the cost of lactic acid production, some effective strategies (e.g., effective mutagenesis and metabolic engineering) have been applied to increase productive capacity of lactic acid bacteria. In addition, low-cost cheap raw materials (e.g., cheap carbon source and cheap nitrogen source) are also used to reduce the cost of lactic acid production. In this review, we summarized the recent developments in lactic acid production, including efficient strain modification technology (high-efficiency mutagenesis means, adaptive laboratory evolution, and metabolic engineering), the use of low-cost cheap raw materials, and also discussed the future prospects of this field, which could promote the development of lactic acid industry.

Adaptive laboratory evolution principles and applications in industrial biotechnology

Adaptive laboratory evolution (ALE) is an innovative approach for the generation of evolved microbial strains with desired characteristics, by implementing the rules of natural selection as presented in the Darwinian Theory, on the laboratory bench. New as it might be, it has already been used by several researchers for the amelioration of a variety of characteristics of widely used microorganisms in biotechnology. ALE is used as a tool for the deeper understanding of the genetic and/or metabolic pathways of evolution. Another important field targeted by ALE is the manufacturing of products of (high) added value, such as ethanol, butanol and lipids. In the current review, we discuss the basic principles and techniques of ALE, and then we focus on studies where it has been applied to bacteria, fungi and microalgae, aiming to improve their performance to biotechnological procedures and/or inspect the genetic background of evolution. We conclude that ALE is a promising and efficacious method that has already led to the acquisition of useful new microbiological strains in biotechnology and could possibly offer even more interesting results in the future.

Metabolism Characteristics of Lactic Acid Bacteria and the Expanding Applications in Food Industry

Lactic acid bacteria are a kind of microorganisms that can ferment carbohydrates to produce lactic acid, and are currently widely used in the fermented food industry. In recent years, with the excellent role of lactic acid bacteria in the food industry and probiotic functions, their microbial metabolic characteristics have also attracted more attention. Lactic acid bacteria can decompose macromolecular substances in food, including degradation of indigestible polysaccharides and transformation of undesirable flavor substances. Meanwhile, they can also produce a variety of products including short-chain fatty acids, amines, bacteriocins, vitamins and exopolysaccharides during metabolism. Based on the above-mentioned metabolic characteristics, lactic acid bacteria have shown a variety of expanded applications in the food industry. On the one hand, they are used to improve the flavor of fermented foods, increase the nutrition of foods, reduce harmful substances, increase shelf life, and so on. On the other hand, they can be used as probiotics to promote health in the body. This article reviews and prospects the important metabolites in the expanded application of lactic acid bacteria from the perspective of bioengineering and biotechnology.

Lactic acid bacteria: little helpers for many human tasks

Lactic acid bacteria (LAB) are a group of highly specialised bacteria specifically adapted to a diverse range of habitats. They are found in the gut of humans and other animals, in many food fermentations, and on plants. Their natural specialisation in close relation to human activities make them particularly interesting from an industrial point of view. They are relevant not only for traditional food fermentations, but also as probiotics, potential therapeutics and cell factories for the production of many different products. Many new tools and methods are being developed to analyse and modify these microorganisms. This review shall give an overview highlighting some of the most striking characteristics of lactic acid bacteria and our approaches to harness their potential in many respects - from home made food to industrial chemical production, from probiotic activities to the most modern cancer treatments and vaccines.

Metabolic engineering coupled with adaptive evolution strategies for the efficient production of high-quality L-lactic acid by Lactobacillus paracasei

The main indicators for industrial production of high-quality lactic acid at elevated temperatures are high titer, productivity, yield, and optical purity. However, no such strains have been reported to meet all these requirements simultaneously. In this study, a high optical purity L-lactic acid producing strain is developed through the CRISPR-Cas9 gene editing platform. Further, adaptive evolution was used to breed and select a high-performance strain (NCBIO01-M2-ldhL1-HT) that could efficiently produce L-lactic acid at a high temperature of 45℃. This strain produced 221.0 g/L of L-lactic acid in open fermentation with high initial glucose concentration. Also, L-lactic acid productivity and yield was above 7.5 g/L/h and 0.96 g/g respectively, as well as the optical purity of L-lactic acid in the fermentation broth exceeded 99.1%. In short, this breeding strain possess high potential to be considered for the commercial production of polymer-grade L-lactic acid.

Impact of storage duration and micro-aerobic conditions on lactic acid production from food waste

Food waste (FW) is an abundant resource with great potential for lactic acid (LA) production. In the present study, the effect of storage time on FW characteristics and its potential for LA production was investigated. The largest part of sugars was consumed during 7 to 15 days of FW storage and the sugar consumption reached 68.0% after 15 days. To enhance the LA production, micro-aerobic conditions (13 mL air/g VS) and addition of β-glucosidase were applied to improve polysaccharides hydrolysis, resulting to increase of monosaccharides content to 76.6%. Regarding fermentative LA production, the highest LA titer and yield of hydrolyzed FW was 32.1 ± 0.5 g/L and 0.76 ± 0.01 g/g_-sugar, respectively. Furthermore, L-LA isomer was higher than 70% when FW was stored for up to 7 days. However, attention should be paid on controlling the FW storage to approximately one week.

Assessment of different Bacillus coagulans strains for l-lactic acid production from defined media and gardening hydrolysates: Effect of lignocellulosic inhibitors

Cellulose valorisation has been successfully addressed for years. However, the use of hemicellulosic hydrolysates is limited due to the presence of C5-sugars and inhibitors formed during pretreatment. Bacillus coagulans is one of the few bacteria able to utilize both C6- and C5-sugars to produce l-lactic acid, but its susceptibility to the lignocellulosic inhibitors needs further investigation. For such a purpose, the tolerance of different B. coagulans strains to increasing concentrations of inhibitors is studied. The isolated A162 strain reached the highest l-lactic acid productivity in all cases (up to 2.4 g L^-1  h^-1), even in presence of 5 g L^-1 of furans and phenols. Remarkably, most of furans and phenolic aldehydes were removed from defined media and hemicellulosic gardening hydrolysate after fermentation with A162. Considering the high productivities and the biodetoxifying effect attained, A162 could be pointed out as a great candidate for valorisation of mixed sugars from hemicellulosic hydrolysates with high inhibitors concentration, promoting the implementation of lignocellulosic biorefineries.

Rapid adaptation for fibre degradation by changes in plasmid stoichiometry within Lactobacillus plantarum at the synthetic community level

The multi-enzyme cellulosome complex can mediate the valorization of lignocellulosic biomass into soluble sugars that can serve in the production of biofuels and valuable products. A potent bacterial chassis for the production of active cellulosomes displayed on the cell surface is the bacterium Lactobacillus plantarum, a lactic acid bacterium used in many applications. Here, we developed a methodological pipeline to produce improved designer cellulosomes, using a cell-consortium approach, whereby the different components self-assemble on the surface of L. plantarum. The pipeline served as a vehicle to select and optimize the secretion efficiency of potent designer cellulosome enzyme components, to screen for the most efficient enzymatic combinations and to assess attempts to grow the engineered bacterial cells on wheat straw as a sole carbon source. Using this strategy, we were able to improve the secretion efficiency of the selected enzymes and to secrete a fully functional high-molecular-weight scaffoldin component. The adaptive laboratory process served to increase significantly the enzymatic activity of the most efficient cell consortium. Internal plasmid re-arrangement towards a higher enzymatic performance attested for the suitability of the approach, which suggests that this strategy represents an efficient way for microbes to adapt to changing conditions.

Evolutionary engineering of Lactobacillus bulgaricus reduces enzyme usage and enhances conversion of lignocellulosics to D-lactic acid by simultaneous saccharification and fermentation

BACKGROUND

Simultaneous saccharification and fermentation (SSF) of pre-treated lignocellulosics to biofuels and other platform chemicals has long been a promising alternative to separate hydrolysis and fermentation processes. However, the disparity between the optimum conditions (temperature, pH) for fermentation and enzyme hydrolysis leads to execution of the SSF process at sub-optimal conditions, which can affect the rate of hydrolysis and cellulose conversion. The fermentation conditions could be synchronized with hydrolysis optima by carrying out the SSF at a higher temperature, but this would require a thermo-tolerant organism. Economically viable production of platform chemicals from lignocellulosic biomass (LCB) has long been stymied because of the significantly higher cost of hydrolytic enzymes. The major objective of this work is to develop an SSF strategy for D-lactic acid (D-LA) production by a thermo-tolerant organism, in which the enzyme loading could significantly be reduced without compromising on the overall conversion.

RESULTS

A thermo-tolerant strain of Lactobacillus bulgaricus was developed by adaptive laboratory evolution (ALE) which enabled the SSF to be performed at 45 °C with reduced enzyme usage. Despite the reduction of enzyme loading from 15 Filter Paper Unit/g_LCB (FPU/g_LCB) to 5 FPU/g_LCB, we could still achieve ~ 8% higher cellulose to D-LA conversion in batch SSF, in comparison to the conversion by separate enzymatic hydrolysis and fermentation processes at 45 °C and pH 5.5. Extending the batch SSF to SSF with pulse-feeding of 5% pre-treated biomass and 5 FPU/g_LCB, at 12-h intervals (36th-96th h), resulted in a titer of 108 g/L D-LA and 60% conversion of cellulose to D-LA. This is one among the highest reported D-LA titers achieved from LCB.

CONCLUSIONS

We have demonstrated that the SSF strategy, in conjunction with evolutionary engineering, could drastically reduce enzyme requirement and be the way forward for economical production of platform chemicals from lignocellulosics. We have shown that fed-batch SSF processes, designed with multiple pulse-feedings of the pre-treated biomass and enzyme, can be an effective way of enhancing the product concentrations.

Engineering aspects of hydrothermal pretreatment: From batch to continuous operation, scale-up and pilot reactor under biorefinery concept

Different pretreatments strategies have been developed over the years mainly to enhance enzymatic cellulose degradation. In the new biorefinery era, a more holistic view on pretreatment is required to secure optimal use of the whole biomass. Hydrothermal pretreatment technology is regarded as very promising for lignocellulose biomass fractionation biorefinery and to be implemented at the industrial scale for biorefineries of second generation and circular bioeconomy, since it does not require no chemical inputs other than liquid water or steam and heat. This review focuses on the fundamentals of hydrothermal pretreatment, structure changes of biomass during this pretreatment, multiproduct strategies in terms of biorefinery, reactor technology and engineering aspects from batch to continuous operation. The treatise includes a case study of hydrothermal biomass pretreatment at pilot plant scale and integrated process design.

Succession of bacterial community structure and metabolic function during solid waste decomposition

Bacterial community structure and metabolic function during solid waste decomposition were investigated using Illumina MiSeq sequencing and phylogenetic investigation of communities by reconstruction of unobserved states, respectively. Results showed that bacterial community diversity and structure differed in aerobic phase, anaerobic acid phase, and methanogenic phase. Anaerobic acid phase had significantly (p < 0.05) higher richness. Proteobacteria, Firmicutes, and Bacteroidetes were the dominant representatives with significant (p < 0.05) difference between three phases. Total nitrogen of solid waste and pH of leachate were the important factors in shaping bacterial community composition. Bacterial metabolism, information storage and processing, and cellular processes and signaling were the primary functions during solid waste decomposition. Key function genes (amo, nar, nis, and nos) profiles suggested that nitrification and denitrifiation mainly occurred in AP and both AP and MP, respectively.