Surface sediments formation during auto-hydrolysis and its effects on the benzene-alcohol extractive, absorbability and chemical pulping properties of hydrolyzed acacia wood chips

Effect of Chemical and Steam Explosion Pulping on the Physical and Mechanical Properties of Sugarcane Straw Pulp Trays

Sugarcane straw fiber (SSF) samples were prepared by chemical pulping (CP) and steam explosion (STE). CP (5, 10, 15% NaOH + 0.2% w/w anthraquinone at 121 °C for 1 h) and STE pressure (1.77, 1.96, and 2.16 MPa at 220 °C for 4 min) SSF trays were molded with a hydraulic hot-press machine at 120 °C, 7 min, and 1.72 MPa. The yield (%) of SSF from STE (54-60% dry basis (db.)) was higher than CP (32-48% db.). STE trays had greater tensile strength than CP. However, STE's elongation and compression strength was lower than CP tray samples. The trays made from SSF using STE had less swelling in thickness, longer water wetting time, and a higher water contact angle than those made from CP. The micrographs displayed a smaller size of SSF obtained in STE than the CP. The appearance and area of peaks in ATR-FTIR spectra and XRD diffractograms, respectively, revealed that the STE trays had a larger residual lignin content from the lignin study and a lower crystallinity index than the CP trays. Moreover, the lightness values of the STE trays were lower than those of the CP trays due to lignin retention. The study results indicate that CP is the preferred method for producing SSF packaging material with high flexibility and fiber purity. However, when considering the specific SF of 4.28, the STE treatment showed superior physical and mechanical properties compared to CP. This suggests that STE could be an excellent alternative green pulping technique for producing durable biobased trays. Overall, the findings highlight the potential of STE as a viable option for obtaining trays with desirable characteristics, providing a sustainable and efficient approach to tray production.

Correlation between physicochemical characteristics of lignin deposited on autohydrolyzed wood chips and their cellulase enzymatic hydrolysis

Enzymatic hydrolysis is a method to generate biofuel from biomass, and autohydrolysis is a popular method to pretreat biomass prior to enzymatic hydrolysis. The primary aim of the present study was to determine the role of lignin produced in the autohydrolysis process on the enzymatic hydrolysis of biomass. The HSQC and ³¹P NMR analyses confirmed that β-O-4 of lignin was reduced, while β-5, β-β, and S/G-ratio of lignin were increased with intensifying the hydrolysis intensity.The increase in the hydrolysis intensity significantly enhanced the condensed and non-condensed phenolic OH group of lignin. Interestingly, the cellulase enzyme adsorbed more on lignin that had more phenolic content, and its association with lignin reduced its activity for hydrolyzing cellulose microcrystals. Strong negative correlations were observed between the enzymatic hydrolysis yield and the condensed S-OH (r² = 0.978) and G-OH (r² = 0.961) of lignin generated in the autohydrolysis process.

Understanding the promoting effect of non-catalytic protein on enzymatic hydrolysis efficiency of lignocelluloses

Lignin deposits formed on the surface of pretreated lignocellulosic substrates during acidic pretreatments can non-productively adsorb costly enzymes and thereby influence the enzymatic hydrolysis efficiency of cellulose. In this article, peanut protein (PP), a biocompatible non-catalytic protein, was separated from defatted peanut flour (DPF) as a lignin blocking additive to overcome this adverse effect. With the addition of 2.5 g/L PP in enzymatic hydrolysis medium, the glucose yield of the bamboo substrate pretreated by phenylsulfonic acid (PSA) significantly increased from 38 to 94% at a low cellulase loading of 5 FPU/g glucan while achieving a similar glucose yield required a cellulase loading of 17.5 FPU/g glucan without PP addition. Similar promotion effects were also observed on the n-pentanol-pretreated bamboo and PSA-pretreated eucalyptus substrates. The promoting effect of PP on enzymatic hydrolysis was ascribed to blocking lignin deposits via hydrophobic and/or hydrogen-bonding interactions, which significantly reduced the non-productive adsorption of cellulase onto PSA lignin. Meanwhile, PP extraction also facilitated the utilization of residual DPF as the adhesive for producing plywood as compared to that without protein pre-extraction. This scheme provides a sustainable and viable way to improve the value of woody and agriculture biomass. Peanut protein, a biocompatible non-catalytic protein, can block lignin, improve enzymatic hydrolysis efficiency and thereby facilitate the economics of biorefinery.