Enhancement of the ANAMMOX bacteria activity and granule stability through pulsed electric field at a lower temperature (16 ± 1 °C)

Recovery strategies and mechanisms of anammox reaction following inhibition by environmental factors: A review

Anaerobic ammonium oxidation (anammox) is a promising biological method for treating nitrogen-rich, low-carbon wastewater. However, the application of anammox technology in actual engineering is easily limited by environmental factors. Considerable progress has been investigated in recent years in anammox restoration strategies, significantly addressing the challenge of poor reaction performance following inhibition. This review systematically outlines the strategies employed to recover anammox performance following inhibition by conventional environmental factors and emerging pollutants. Additionally, comprehensive summaries of strategies aimed at promoting anammox activity and enhancing nitrogen removal performance provide valuable insights into the current research landscape in this field. The review contributes to a comprehensive understanding of restoration strategies of anammox-based technologies.

Analyzing the nitrogen removal performance and cold adaptation mechanism of immobilized cold-acclimation ANAMMOX granules at low temperatures

To improve the treatment performance of anaerobic ammonium oxidation (ANAMMOX) processes at low temperatures, the immobilized cold-acclimation ANAMMOX granules (R3) were prepared and their low-temperature nitrogen removal ability as well as the cold adaptation mechanism were analyzed. The results indicated that the total inorganic nitrogen (TIN) removal efficiency of R3 was significantly higher than that of R2 (cold-acclimation granules without immobilization) and R1 (common granules), especially at 11 ± 2 and 7 ± 2°C (68% and 54%). These were attributed to the remarkable biomass retention capacity of R3, high up to 4.3-4.9 mg/gVSS even at 5-18°C. Besides, higher protein (PN) content of tightly bound extracellular polymeric substances (TB-EPS) also facilitated microbial aggregation in R3. Meanwhile, R3 granules retained higher ANAMMOX activity and heme c content at 5-25°C. The original dominant ANAMMOX genus (Candidatus Kuenenia) in R3 kept higher abundance (49%-57%) at 23 ± 2 and 16 ± 2°C, whereas Candidatus Brocadia became the dominant ANAMMOX genus (25%-32%) in R3 at 11 ± 2 and 7 ± 2°C. Notably, different ANAMMOX genera in R3 may adapt to cold environment by regulating the expression of cold-stress proteins (CspA, CspB, PpiD, and UspA). PRACTITIONER POINTS: Immobilized cold-acclimation ANAMMOX granules showed higher nitrogen removal efficiency at 23°C → 5°C. Immobilization method effectively retained biomass (Candidatus Kuenenia and Candidatus Brocadia). Immobilization facilitated TB-EPS release and biological aggregation in cold-acclimation granules. Expression of cold-stress proteins in immobilized cold-acclimation granules was more active.

Relationships of pulsed frequency and anammox bacteria growth rate, at low temperatures

This study explored pulsed frequency that could enhance the anammox bacteria growth rate and TN removal rate at low temperatures (16 ± 1°C). The results showed that the growth rate of anammox bacteria in R1 (1000 Hz) was significantly higher than in R2 (30 Hz) and R3 (106Hz). The relative abundance values of anammox bacteria R1 were higher by 52.21% and 172.41% than R2 and R3, while that of MLSS were as high as 241.07% and 471.36% than R2 and R3, with the nitrogen loading rate was 6.84 kg-N/m³/d. Besides, the dynamics also showed that the specific anammox activity (SAA) and the cellular yield of R1 were higher than R2 and R3. The intermediate frequency could enhance the cell division by stimulating the anammoxosome and reduce the ionic hydration layer to accelerate the ion migration rate, further improving the number of anammox bacteria even at low temperatures. The pulsed frequency could enhance the anammox growth rate and the doubling time is just 5 d.

Enhancing start-up strategies for anammox granular sludge systems: A review

The anaerobic ammonium oxidation (anammox) process has been developed as one of the optimal alternatives to the conventional biological nitrogen removal process because of its high nitrogen removal capacity and low energy consumption. However, the slow growth rate of anammox bacteria and its high sensitivity to environmental changes have resulted in fewer anammox sludge sources for process start-up and a lengthy start-up period. Given that anammox microorganisms tend to aggregate, granular-anammox sludge is a frequent byproduct of the anammox process. In this study, we review state-of-the-art strategies for promoting the formation of anammox granules and the start-up of the anammox process based on the literature of the past decade. These strategies are categorized as the transformation of alternative sludge, the addition of accelerators, the introduction of functional carriers, and the implementation of other physical methods. In addition, the formation mechanism of anammox granules, the operational performance of various strategies, and their promotion mechanisms are introduced. Finally, prospects are presented to indicate the gaps in contemporary research and the potential future research directions. This review functions as a summary guideline and theoretical reference for the cultivation of granular-anammox sludge, the start-up of the anammox process, and its practical application.

Pulsed electric field promotes the growth metabolism of aerobic denitrifying bacteria Pseudomonas putida W207-14 by improving cell membrane permeability

The purpose of this study was to explore the stimulation mechanism of low pulsed electric field (PEF) strength treatment to promote the growth metabolism of aerobic denitrifying bacteria Pseudomonas putida W207-14. The results indicated that compared with the control group, the strain W207-14 treated with PEF entered the logarithmic growth phase 5 h earlier, the growth time to reached the maximum cell optical density at 600 nm (OD600) of 1.935 ± 0.04 was only 24 h, which shortened by half. With the reduction of growth time, the metabolic rate of the strain increased significantly, in which the removal efficiency of COD, NO₃^--N and TN was 97.67 ± 1.12%, 90.34 ± 0.73% and 90.13 ± 0.10% in 24 h, respectively. The maximum nitrate removal rate increased from 3.49 mg/L/h to 7.53 mg/L/h. A large number of cells with simultaneous cell membrane damage and high physiological activity were observed by flow cytometry (FCM) in combination with fluorescence staining analysis, which confirmed the reversible electroporation on the cell membrane of strain W207-14 treated with PEF. Transcriptomic analysis indicated that PEF activated the highly significant differential expression of membrane porin (opdB, opdC, and oprB) and cytochrome oxidoreductase related genes (ccoP, ccoN, cioA and cioB) on the cell membrane, which promoted the transport of nutrients through the cell membrane and electron transfer during aerobic respiration and provided an explanation for the possible mechanism of PEF promoting the growth metabolism of strain W207-14 at the micro level. These results lay a foundation for the practical application of PEF enhanced aerobic denitrification technology.

Performance of anammox enchanced by pulsed electric fields under added organic carbon sources using integrated network and metagenomics analyses

This paper aims to investigate the function of a pulsed electric field (PEF) in the anaerobic ammonia oxidation (anammox) process after adding certain chemical oxygen demand (COD) through integrated network and metagenomics analyses. The findings showed that the presence of COD was detrimental to anammox, but PEF could significantly reduce the adverse effect. The total nitrogen removal in the reactor for applying PEF was 16.99% higher on average than the reactor for only dosing COD. Additionally, PEF upgraded the abundance of anammox bacteria subordinate to the phylum Planctomycetes by 9.64%. The analysis of molecular ecological networks promulgated that PEF resulted in an increase in network scale and topology complexity, thereby boosting the potential collaboration of the communities. Metagenomics analyses demonstrated that PEF dramatically promoted anammox central metabolism in the presence of COD, specifically enhancing pivotal N functional genes (hzs, hdh, amo, hao, nas, nor and nos).

Adaptation of anammox consortia in microbial fuel cell to low temperature: Microbial community and predictive functional profiling

The purpose of this study was to explore the tolerance mechanism of anammox consortia in microbial fuel cell (MFC) system at low temperature. Data showed that nearly 80 % total nitrogen removal was achieved after the temperature decreased from 30 °C to 15 °C. The nitrogenremovalrate (NRR) of the system was decreased by 26.3 %, from 0.441 kgN·m^-3·d^-1 at 30 °C to 0.325 kgN·m^-3·d^-1 at 15 °C. Isotope experiment in ¹⁵NH₄⁺-containing reactor found that much more ²⁹N₂ were produced than ³⁰N₂, confirming that anammox was the main ¹⁵NH₄⁺ removal pathway and electrochemical oxidation participate in this process. High throughput sequencing analysis indicated the low temperature stimulated the enrichment of heterotrophic bacteria, such as Comamonadaceae and Rhodobacteraceae. While the relative abundance of Candidatus Brocadia, typical anammox bacteria, decreased significantly. Kyoto Encyclopaedia of Genes and Genomes (KEGG) pathway analysis showed that the low temperature induced a more efficient expression in synthesis of unsaturated fatty acids (UFAs) and ABC membrane transports. This study indicates that anammox consortia are likely to maintain high nitrogen removal performance of MFC system by changing the proportion of membrane composition and EPS exportation.

Nitrogen removal performance and rapid start-up of anammox process in an electrolytic sequencing batch reactor (ESBR)

In this study, the electrolytic sequencing batch reactor (ESBR) with different current densities was constructed to investigate the nitrogen removal performance and rapid start-up of anaerobic ammonia oxidation (anammox) process. The changes of total nitrogen removal rate (TNRR), specific anammox activity (SAA) and nitrogen concentration under different current densities were analyzed, and then the effect of the optimal current density on the start-up of anammox in ESBR was explored. The results showed that ammonium nitrogen removal efficiency (92.7%), nitrite nitrogen removal efficiency (15.5%) and total nitrogen removal efficiency (28.1%) were obtained with the TNRR and SAA were 0.0118 g N L^-1 d^-1 and 0.0050 g N (g Vss d)^-1, respectively under the optimal conditions (i.e., current density = 0.10 mA cm^-2, temperature = 36 °C and pH = 7.6). In addition, the stoichiometric ratio indicated that anammox was initiated successfully for 91 days in ESBR with the current density of 0.10 mA cm^-2, which was shortened by 10 days compared with the conventional SBR without current density. These results suggest that an array of rapid start-up processes of anammox can be developed through applying current density to stimulate the activity of anammox bacteria (AnAOB).

A new concept of waste iron recycling for the enhancement of the anammox process

As a by-product of industry, waste iron scraps (WIS) are low-cost and widely available, which was potential for the development of iron-assisted anammox. In this study, the feasibility of adding WIS to enhance the nitrogen removal of the anammox process (also called WIS-assisted anammox) was demonstrated. Results indicated that the WIS-assisted anammox reactors performed a 15-35% higher nitrogen removal efficiency than that of the control. Compared to the sludge from the control, the sludge from the WIS-assisted anammox reactors had a higher iron content (78-113 g kg^-1 SS) and a better specific anammox activity (10.8-15.5 mg N g^-1 VSS h^-1). The enhanced growth of the anammox bacteria (related to Ca. Kuenenia stuttgartiensis with 99% similarity) in the WIS-assisted anammox reactors was also confirmed by high-throughput sequencing and qPCR. Furthermore, the functional genes predicted by PICRUSt2 revealed a higher level of hydroxylamine oxidoreductase (hao)-like proteins expression of the biomass from the WIS-assisted anammox reactors, implying that the hydroxylamine-related anammox pathway was promoted. Additionally, the observation of cytoplasmic nitrate reductase (narG), copper-containing nitrite reductase (nirK), and nitric oxide reductase (norB) suggested that the introduction of WIS might promote the denitrification ability. This was correlated to the lower ΔNO₃^-/ΔNH₄⁺ ratio observed in these WIS-assisted anammox reactors. Overall, the WIS-assisted anammox offers a sustainable nitrogen removal process for wastewater treatment with waste iron recycling.

Recovery Strategies for Heavy Metal-Inhibited Biological Nitrogen Removal from Wastewater Treatment Plants: A Review

Biological nutrient removal is an integral part of a wastewater treatment plant. However, the microorganism responsible for nutrient removal is susceptible to inhibition by external toxicants such as heavy metals which have the potential to completely inhibit biological nutrient removal. The inhibition is a result of the interaction between heavy metals with the cell membrane and the deoxyribonucleic acid (DNA) of the cell. Several attempts, such as the addition of pretreatment steps, have been made to prevent heavy metals from entering the biological wastewater systems. However, the unexpected introduction of heavy metals into wastewater treatment plants result in the inhibition of the biological wastewater treatment systems. This necessitates the recovery of the biological process. The biological processes may be recovered naturally. However, the natural recovery takes time; additionally, the biological process may not be fully recovered under natural conditions. Several methods have been explored to catalyze the recovery process of the biological wastewater treatment process. Four methods have been discussed in this paper. These include the application of physical methods, chelating agents, external field energy, and biological accelerants. These methods are compared for their ability to catalase the process, as well as their environmental friendliness. The application of bio-accelerant was shown to be superior to other recovery strategies that were also reviewed in this paper. Furthermore, the application of external field energy has also been shown to accelerate the recovery process. Although EDTA has been gaining popularity as an alternative recovery strategy, chelating agents have been shown to harm the metal acquisition of bacteria, thereby affecting other metabolic processes that require heavy metals in small amounts. It was then concluded that understanding the mechanism of inhibition by specific heavy metals, and understanding the key microorganism in the inhibited process, is key to developing an effective recovery strategy.

Novel strategy for rapid start-up and stable operation of anammox: Negative pressure coupled with the direct-current electric field

An application challenge of anaerobic ammonia oxidation (anammox) is the slow proliferation rate of anaerobic ammonium oxidation bacteria (AnAOB). This study adopted negative pressure coupled with the direct-current electric field (NP-DCEF) to evaluate system nitrogen removal performance. Results showed that the total nitrogen removal rate (TNRR) of the NP-DCEF system was stable at 88.6% after seven days. Compared with that of the ordinary operating system (45.4%), the relative abundance of Candidatus-kuenenia considerably increased from 51.9% to 57.6%. Under transient and long-term influent fluctuation, the NP-DCEF system showed high nitrogen removal performance. The specific activity of AnAOB (SAA) reached 11.0 mg N∙g Vss^-1 h^-1 under load fluctuation, and it was 8.7 mg N∙g Vss^-1 h^-1 under ordinary operational conditions. In addition, the specific activities of hydrazine dehydrogenase (HDH) and hydrazine synthetase (HZS) reached 32.66 and 92.95 U∙L^-1, which are considerably higher than those under the ordinary operating conditions (18.41 and 63.20 U∙L^-1). These results indicated that the novel operation strategy has specific feasibility and potential for the start-up and long-term operation of anammox.

Mechanism on the microbial salt tolerance enhancement by electrical stimulation

The application of biological methods in industrial saline wastewater treatment is limited, since the activities of microorganisms are strongly inhibited by the highly concentrated salts. Acclimatized halotolerant and halophilic microorganisms are of high importance since they can resist the environmental stresses of high salinity. The acclimation to salinity can be passive or active based on whether external simulation is used. However, there is a need for development of economic, efficient and reliable active biological stimulation technologies to accelerate salinity acclimation. Recent studies have shown that electrical stimulation can effectively enhance microbial salt tolerance and pollutant removal ability. However, there have been no comprehensive reviews of the mechanisms involved. Therefore, this mini-review described the mechanisms of electrical stimulation that can significantly improve microbial bioactivity and biodiversity. These mechanisms include regulation of Na⁺ and K⁺ transporters by changing membranepotential and promoting ATP production, as well as regulation of extracellular polymer substances through enhanced release of low molecular weight EPS and quorum sensing molecules. The information provided herein will facilitate the application of biological high-salinity wastewater treatment.

Mechanism of stable power generation and nitrogen removal in the ANAMMOX-MFC treating low C/N wastewater

This study investigated the mechanism of enhanced power generation and nitrogen removal in an ANAMMOX-MFC reactor through subsequent acetate addition. Data showed that nearly 99% total nitrogen removal (≤1 mg L^-1) and 1.41 W m^-3 power generation were achieved synchronously under low COD/N (∼1.5) after the subsequent addition of acetate (100 mgCOD·L^-1). The columbic efficiency of the system has increased by 15 times (from 0.64% to 9.48%) after adding acetate. Batch tests showed that the denitrification and ANAMMOX progress occurred synchronously before acetate addition the nitrogen removal rate was accelerated. A distinct shift of bacterial community driven by acetate addition was discovered. The high throughput sequencing analysis indicated acetate addition stimulated the enrichment of denitrifiers, such as Aquimonas, Bradyrhizobium, Thauera, and the potential exoelectrogens changing from Comamonas to Pseudomonas. Functional genes forecasts based on KEGG database and COG database showed that the expressions of TCA functional genes were highly promoted in ANAMMOX-MFC, which demonstrated the enhanced electron transfer pathway driven by acetate addition under low COD/N ratio.

Additional electric field alleviates acidity suppression in anaerobic digestion of kitchen wastes via enriching electro-active methanogens in cathodic biofilms

The aim of this study was to investigate the feasibility that the suppression of acidity in anaerobic digestion of kitchen wastes could be alleviated with additional electric field. The results showed that, the accumulation of acidity seriously suppressed methanogenesis, and no methane was detected in the electrode-supplemented digester without applied voltage. In contrast, with applied voltages of 0.6-1.2 V, the suppression of acidity was alleviated, and methane production rates reached 558-669 L/kg-volatile suspended solid that were higher than that previously reported with carbon-based conductive materials, such as granular active carbon and biochar. Although the reduced peak with a potential ranging from -0.3 V to -0.2 V close to the reduced potential of CO₂/CH₄ detected via cyclic voltammetry, the maximum methane yield derived from cathodic reduction of CO₂ only accounted for 0.13-0.33% of total methane yield with applied voltages. Microbial community analysis showed that, Methanosarcina species were specially enriched with applied voltages, accounting for ca. 40-70% of the communities. Together with the increase in the relative abundance of Syntrophomonas species, Methanosarcina species directly accepting electrons from Syntrophomonas species via DIET might be the primary reason for alleviating the suppression of acidity. Further investigations via three-dimensional excitation emission matrix and in-situ electrochemical Fourier transform infrared spectroscopy found that additional electric field stimulated the secretion of EPS primarily comprised of protein-like substance, which might mediate the EET between Syntrophomonas and Methanosarcina species.

Towards mainstream partial nitritation/anammox in four seasons: Feasibility of bioaugmentation with stored summer sludge for winter anammox assistance

The strong effect of low temperatures on anammox challenges its mainstream application over the winter in temperate climates. Winter bioaugmentation with stored summer surplus sludge is a potential solution to guarantee sufficient nitrogen removal in winter. Firstly, the systems for which nitrogen removal deteriorated by the temperature decrease (25 °C → 20 °C) could be fully restored bioaugmenting with granules resp. flocs stored for 6 months at 118 resp. 220% of the initial biomass levels. Secondly, the reactivation of these stored sludges was tested in lower temperature systems (15.3 ± 0.4/10.4 ± 0.4 °C). Compared to the activity before storage, between 56% and 41% of the activity of granules was restored within one month, and 41%-32% for flocs. Additionally, 85-87% of granules and 50-53% of flocs were retained in the systems. After reactivation (15.3 ± 0.4/10.4 ± 0.4 °C), a more specialized community was formed (diversity decreased) with Candidatus Brocadia still dominant in terms of relative abundance. Capital and operating expenditures (CAPEX, OPEX) were negligible, representing only 0.19-0.36% of sewage treatment costs.

Application of electric fields to mitigate inhibition on anammox consortia under long-term tetracycline stress

The feasibility of applying electric fields to mitigate inhibition of tetracycline (TC) on anammox process and improve system stability was evaluated in this study. Three electric field intensities of 1, 3 and a variable intensity of 1-6 V (VEF) were used to optimize electric field intensity under gradually increasing addition of TC (0.5, 2 and 10 mg L^-1). Results showed that the application of electric fields (3 V and VEF) could improve TC tolerance and keep relatively high-efficiency nitrogen removal performance, especially at TC ≥ 2 mg L^-1. Furthermore, applying electric fields contributed to mitigate irreversible inhibition and improve the stability of community structure. Underlying mechanism analysis indicated that the main mechanism of applying electric fields to mitigate inhibition relies on sludge structure strengthening. This study explored a novel strategy to reduce the inhibition of antibiotics on microbial denitrification and broaden the application of anammox in industrial water treatment.

Effects of AHLs inhibitors and exogenous AHLs on the stability and activity of Anammox granules at low temperatures

This study investigated the relationship between acyl homoserine lactones (AHLs)-based quorum sensing (QS) and the properties of Anammox granular sludge at low temperatures (11-23°C). Results indicated that adding different concentrations of AHLs inhibitors reduced the content of N-hexanoyl-dl-homoserine lactone (C6-HSL) and N-octanoyl-dl-homoserinelactone (C8-HSL) in Anammox granules on different degrees at different operation temperatures, which led to the deterioration of granules stability and activity. The important role of endogenous C6-HSL and C8-HSL signals in maintaining Anammox granular sludge stability and activity in low-temperature conditions was revealed. In addition, in the process of reducing operation temperatures, another type of AHL signal (N-(3-oxooctanoyl)-l-homoserine lactone, 3OC8-HSL) was released by Anammox granules. The effects of exogenous C8-HSL on the strength, average diameter, and density of Anammox granules were closely related to the operation temperature. When the operation temperature ranged from 11°C to 16°C, the stability of granules could be significantly improved by exogenous C8-HSL. In addition, the addition of C6-HSL and 3OC8-HSL promoted the activity of Anammox granules when the operation temperatures of the reactors were 11-23°C. This study proposed a novel approach to improve the properties of Anammox granules at low temperatures from the perspective of QS. PRACTITIONER POINTS: Endogenous AHLs played an important role in maintaining the activity and stability of Anammox granules at 11-23°C. Exogenous C8-HSL improved the granules stability at the low temperature of 11-16°C. Exogenous C6-HSL or 3OC8-HSL promoted the granules activity at 11-23°C. Supply a novel way to improve the Anammox granules performance at low temperatures.

Enhancing anammox resistance to low operating temperatures with the use of PVA gel beads

Low temperatures, or a sudden decrease in operating temperature, can seriously inhibit anammox activity, it is, therefore, important to maintain anammox activities at a low temperature. In this study, the use of gel beads to enhance the resistance of anammox biomass to a low temperature was investigated. The performance of three reactors: R1 without gel beads; R2 with polyvinyl alcohol/chitosan (PVA/CS); R3 with PVA/CS/Fe, was studied and compared in a temperature transition from 35 to 8 °C. When the operating temperature was ≥25 °C, there was little difference in nitrogen removal among the three reactors. Decreasing the temperature to < 25 °C created obvious difference between R1 and R2/R3. R1 had a nitrogen removal efficiency (NRE) of 33.1 ± 25.3% at 10 °C, significantly lower than that of R2 (90.5 ± 2.5%) or R3 (87.7 ± 11.1%). Unclassified Candidatus Brocadiaceae was the dominant genus at 10 °C, with an abundance of 44.4, 56.5 and 58.7% in R1, R2 and R3, respectively. These differences were attributed to the use of gel beads, which promoted the granulation of both the non-immobilized sludge and the immobilized biomass, resulting in higher anammox activities in R2/R3. The non-immobilized sludge of R1 was dominated by small particles (<300 μm) at 10 °C, while in R2 and R3 large particles (1000-2000 μm) were the main components. Furthermore, the immobilized biomass on gel beads exhibited much higher anammox activity and maintained a relatively high level of nitrate reductase and nitrite reductase in response to the temperature decrease. The Fe²⁺/Fe³⁺ in the PVA/CS/Fe gel beads further promoted microbial aggregation and led to an improved performance in R3 compared to R2. The results of this study demonstrate an effective approach to increase anammox resistance at low operating temperatures.

Pulse Electric Field Technology for Wastewater and Biomass Residues’ Improved Valorization

Development and adoption of more efficient and robust technologies for reuse of wastewater embedded resources, in particular materials and energy, is becoming an unavoidable necessity. Among many emerging technologies in the sector of wastewater treatment residuals valorization, Pulsed Electric Field (PEF) processes have shown interesting potential, although they have not yet entered the sector’s mainstream as a consolidated commercial technology, as in other industrial applications, such as the food, medical, and bio-based industries. PEF is a non-thermal technology suitable to biological applications, involving gentle cell disintegration and enhanced cell membrane permeability and as such applicable to disinfection, sterilization, and to those processes that benefit from an enhanced extraction of organic compounds from biological matter, such as anaerobic digestion, biological processes for recovery of nutrients, and biorefinery of cell-embedded compounds. PEF technology applications in wastewater/biomass residues management are reported and advantages, drawbacks, and barriers of the technology are discussed in this paper.

Insight: High intensity and activity carrier granular sludge cultured using polyvinyl alcohol/chitosan and polyvinyl alcohol/chitosan/iron gel beads

The newly developed carrier granular sludge (CGS) with polyvinyl alcohol/chitosan (PVA/CS) and PVA/CS/Fe gel beads assistance showed higher intensity and anammox activity than the natural granular sludge (NGS). Through comprehensive investigation, it was found: (1) the gel beads provided a stable framework of cells entangle with extracellular polymeric substances (EPS) to enhance the sludge intensity. In this framework, β-polysaccharides are distributed at the edge of CGS as a protection layer, α-polysaccharides and proteins are spread in the whole cross-section as backbones, and Fe²⁺/Fe³⁺ in CGS-PVA/CS/Fe act as bridges to link with the negatively charged groups on bacterial surfaces and proteins. (2) The porous gel beads satisfied a relatively unimpeded mass transfer. Thus, the sludge activity, microbe's metabolism, membrane transportation and environmental adaption in CGS were apparently improved. The results improved the understanding about the advantages of the CGS and indicated their possible application in full-scale anammox processes.

Impacts of organics on the microbial ecology of wastewater anammox processes: Recent advances and meta-analysis

Anaerobic ammonium oxidation (anammox) represents a promising technology for wastewater nitrogen removal. Organics management is critical to achieving efficient and stable performance of anammox or integrated processes, e.g., denitratation-anammox. The aim of this systematic review is to synthesize the state-of-the-art knowledge on the multifaceted impacts of organics on wastewater anammox community structure and function. Both exogenous and endogenous organics are discussed with respect to their effects on the biofilm/granule structure and function, as well as the interactions between anammox bacteria (AnAOB) and a broad range of coexisting functional groups. A global core community consisting of 19 taxa is identified and a co-occurrence network is constructed by meta-analysis on the 16S rDNA sequences of 149 wastewater anammox samples. Correlations between core taxa, keystone taxa, and environmental factors, including COD, nitrogen loading rate (NLR) and C/N ratio are obtained. This review provides a holistic understanding of the microbial responses to different origins and types of organics in wastewater anammox reactors, which will facilitate the design and operation of more efficient anammox-based wastewater nitrogen removal process.

Simultaneous enhanced biological phosphorus removal and semi-nitritation (EBPR-SN) followed by anammox process treating municipal wastewater at seasonal temperatures: From summer to winter

This work investigated the feasibility of a novel simultaneous enhanced biological phosphorus removal and semi-nitritation (EBPR-SN) plus anammox process treating real municipal wastewater from summer to winter (28.1- 15.3 °C). Two lab-scale sequential reactors were used in this study, namely EBPR-SN and Anammox sequencing batch reactors (SBRs). Long-term operation suggested that ammonium oxidizing bacteria abundance decreased from 1.67% to 0.89% whereas nitrite oxidizing bacteria decreased to nearly undetected in the EBPR-SN SBR, maintaining the stable nitritation (nitrite accumulation ratio: 98.3 ± 1.0%). Lowering airflow rate was effective to retain nitritation with temperature decrease. Reliable nutrient removal was still maintained in winter (16.4 ± 0.7 °C), i.e. the removal efficiencies for nitrogen and phosphorus were 80.0 ± 3.5% and 95.4 ± 5.2%, respectively, with short aerobic HRT (6.4 h) and low dissolved oxygen (0.2-1.5 mg/L). The percentage of anammox contribution to nitrogen-removal increased with temperature decrease, although Candidatus Brocadia abundance decreased. Additionally, the protection of extracellular polymeric substances was important to the successful performance.

Advances and challenges of mainstream nitrogen removal from municipal wastewater with anammox-based processes

Anaerobic ammonium oxidation (anammox) is a novel process of deammonification that exhibits superior ecological and economic potential compared to that of traditional heterotrophic processes. Although this process has been successfully implemented in treating high-strength nitrogen-contaminated wastewater, it still faces many challenges in treating mainstream municipal wastewater. This review aims to provide an overview of the status and challenges of mainstream anammox-based processes. The different configurations and crucial factors are discussed in this review. Finally, the future needs for feasible application are stated. PRACTITIONER POINTS: Factors restricting mainstream application of anammox-based processes are reviewed. Control strategies for selecting and maintaining anammox bacteria are discussed. Recent advances in nitrite production via partial nitrification or denitrification are summarized. Future needs for the feasible application of anammox-based nitrogen removal technology for mainstream municipal wastewater treatment are outlined.

What's the variation in anammox reactor performance after single and joint temperature based shocks?

A laboratory-scale up-flow anaerobic sludge blanket reactor was used to investigate the effects of temperature-based (single and combined with loading) shocks on the performance of anaerobic ammonium oxidation (anammox) reactor. The reactor was tolerant to 15 °C and 25 °C shocks; however, temperature shock of 55 °C led to severe accumulation of effluent NO₂^--N (>100 mg L^-1), which induced substrate inhibition. Although the shock experiments achieved a maximum effluent NO₂^--N concentration of 205.4 mg L^-1 after a hydraulic retention time-substrate concentration shock at 25 °C, the inhibition was still reversible. During the experiments, the content of extracellular polymeric substances (EPS) increased significantly after each shock to protect the anammox bacteria, and the value decreased correspondingly at the end of the recovery phase. The specific anammox activity showed the opposite tendency compared with that of the EPS. The performance of anammox reactor under a series of short-term temperature shocks was investigated, and the results can provide new ideas for future research.