Oxygen-containing functional groups on bioelectrode surface enhance expression of c-type cytochromes in biofilm and boost extracellular electron transfer

Enhancing CH4 production in microbial electrolysis cells: Optimizing electric field via carbon cathode resistivity

Microbial electrolysis cells (MECs) are increasingly recognized as a promising technology for converting CO2 to CH4, offering the dual benefits of energy recovery from organic wastewater and CO2 emission reduction. A critical aspect of this technology is the enhancement of the electron-accepting capacity of the methanogenic biocathode to improve CH4 production efficiency. This study demonstrates that adjusting the cathode resistivity is an effective way to control the electric field intensity, thereby enhancing the electron accepting capacity and CH4 production. By maintaining the electric field intensity within approximately 8.50-10.83 mV·cm-1, the CH4 yield was observed to increase by up to two-fold. The improvement in CH4 production under optimized electric field conditions was attributed to the enhancement of the direct accepting capacity of the biocathode. This enhancement was primarily due to an increase in the relative abundance of Methanosaeta by approximately 10 % and an up to 83.78 % rise in the electron-accepting capacity of the extracellular polymeric substance. These insights offer a new perspective on the operation of methanogenic biocathodes and propose a novel biocathode construction methodology based on these findings, thus contributing to the enhancement of MEC efficiency.

Comparative genomic analysis reveals electron transfer pathways of Thermoanaerobacterium thermosaccharolyticum: Insights into thermophilic electroactive bacteria

Microbial extracellular respiration is an important energy metabolism on earth, which is significant for the elemental biogeochemical cycle. Herein, extracellular Fe(III) and electrode respiration were confirmed in Thermoanaerobacterium thermosaccharolyticum MJ2. The intra/extracellular electron transfer (IET/EET) mechanism of MJ2 was investigated by comparative genomic analysis for the first time. Morphological characterization and electrochemical properties of anode illustrated that MJ2 generated bio-electricity by forming a biofilm. The respiration chain inhibition and enzyme activity tests showed that hydrogenase with cytochrome c (Cyt-c) was involved in IET of MJ2. Noteworthily, the exogenous Cyt-c increased hydrogenase activity to promote bio-electricity generation by 92.84 %. The Cyt-c gene synteny between MJ2 and another well-known exoelectrogen (Thermincola potens JR) indicated that Cyt-c bound to the outer membrane mediated the formation of biofilm involved in EET of MJ2. This study broadened the understanding of microbial extracellular respiration diversity and provided new insights to explore the electron transfer pathways of exoelectrogens.

Revealing Co-N4 @Co-NP Bridge-Enabled Fast Charge Transfer and Active Intracellular Methanogenesis in Bio-Electrochemical CO2 -Conversion with Methanosarcina Barkeri

To significantly advance the bio-electrochemical CO2 -conversion rate and unfold the correlation between the abiotic electrode and the attached microorganisms, an atomic-nanoparticle bridge of Co-N4 @Co-NP crafted in metal-organic frameworks-derived nanosheets is integrated with a model methanogen of Methanosarcina barkeri (M. barkeri). The direct bonding of N in Co-N4 and Fe in member protein of Cytochrome b (Cytb) activates a fast direct electron transfer path while the Co nanoparticles further strengthen this bonding via decreasing the energy gap between the p-band center of N and the d-band center of Fe. This multiorbital tuning operation of Co nanoparticles also enhances the coenzyme F420-mediated electron transfer by enabling the electron flow direct to the hydrogenation sites. Particularly, the increased surface electric field of the Co-N4 @Co-NP bridge-based nanosheet electrode facilitates the interfacial Na+ accumulation to expedite ATPase transport for powering intracellular CO2 conversion. Remarkably, the self-assembled M.barkeri-Co-N4 @Co-NP biohybrid achieves a high methane production rate of 3860 mmol m-2 day-1 , which greatly outperforms other reported biohybrid systems. This work demonstrates a comprehensive scrutinization of biotic-abiotic energy transfer, which may serve as a guiding principle for efficient bio-electrochemical system design.

Long-term operation of cathode-enhanced ecological floating bed coupled with microbial electrochemical system for urban surface water remediation: From lab-scale research to engineering application

Ecological floating bed coupled with microbial electrochemical system (ECOFB-MES) has great application potential in micro-polluted water remediation yet limited by low electron transfer efficiency on the microbial/electrode interface. Here, an innovative cathode-enhanced EOCFB-MES was constructed with nano-Fe₃O₄ modification and applied for in-situ remediation both at lab scale (6 L, 62-day operation) and demonstration scale (2300 m², 1-year operation). The cathode-enhanced ECOFB-MES exhibited superior removal in TOC (81.43 ± 2.05%), TN (85.12% ± 1.46%) and TP (59.80 ± 2.27%), much better than those of original ECOFB-MES and anode-enhanced ECOFB-MES in the laboratory test. Meanwhile, cathode-enhanced ECOFB-MES boosted current output by 33% than that of original ECOFB-MES, which made a great contribution to the improvement of ectopic electronic compensation for pollutant decontamination. Notably, cathode-enhanced ECOFB-MES presented high efficiency, stability and durability in the demonstration test, and fulfilled the average concentration of COD (9.5 ± 2.81 mg/L), TN (1.00 ± 0.21 mg/L) and TP (0.10 ± 0.04 mg/L) of effluent water to meet the Grade III (GB 3838-2002) with stable operation stage. Based on the KOSIM calculation, the removal loads of cathode-enhanced ECOFB-MES in carbon, nitrogen and phosphorus could reach 37.14 g COD/(d·m²), 2.62 g TN/(d·m²) and 0.55 g TP/(d·m²), respectively. According to the analysis of microbial communities and functional genes, the cathode modified by Fe₃O₄ made a sensible enrichment in electroactive bacteria (EAB) and nitrogen-converting bacteria (NCB) as well as facilitated the functional genes expression in electron transfer and nitrogen metabolism, resulting in the synergistic removal of carbon in sediment and nitrite in water. This study provided a brandnew technique reference for in-situ remediation of surface water in practical application.

The modified properties of sludge-based biochar with ferric sulfate and its effectiveness in promoting carbon release from particulate organic matter in rural household wastewater

The scarcity of carbon sources presents a significant challenge for the bio-treatment of rural domestic wastewater (RDW). This paper presented an innovative approach to address this issue by investigating the supplementary carbon source through in-situ degradation of particulate organic matter (POM) facilitated by ferric sulfate modified sludge-based biochar (SBC). To prepare SBC, five different contents of ferric sulfate (0%, 10%, 20%, 25%, and 33.3%) were added to sewage sludge. The results revealed that the pore and surface of SBC were enhanced, providing active sites and functional groups to accelerate the biodegradation of protein and polysaccharide. During the 8-day hydrolysis period, the concentration of soluble chemical oxidation demand (SCOD) increased and peaked (1087-1156 mg L^-1) on the fourth day. The C/N ratio increased from 3.50 (control) to 5.39 (25% ferric sulfate). POM was degraded the five dominant phyla, which were Actinobacteriota, Firmicutes, Synergistota, Proteobacteria, and Bacteroidetes. Although the relative abundance of dominant phyla changed, the metabolic pathway remained unchanged. The leachate of SBC (<20% ferric sulfate) was beneficial for microbes, but an excessive amount of ferric sulfate (33.3% ferric sulfate) could have inhibition effects on bacteria. In conclusion, ferric sulfate modified SBC holds the potential for the carbon degradation of POM in RDW, and further improvements should be made in future studies.

Lignocellulose reconstituted shape-controllable self-supporting carbonaceous capacitance-anodes with high electron transfer rates for high-performance microbial electrochemical system

Natural biomass is a promising candidate for manufacturing an efficient anode in the microbial electrochemical system (MES) for its abundance and low cost. However, the structure and performance of the electrode highly depend on the biomass species. A simple and sustainable method for creating a self-supporting electrode is proposed by freeze-drying and carbonizing a blend of cellulose, lignin, and hemicellulose. This strategy leads to a cork-like structure and improved mechanical strength of the lignocellulose carbon. A power density of 4780 ± 260 mW m^-2 (CLX-800) was achieved, which was the highest record for unmodified lignocellulose-based anodes in the microbial fuel cells. The morphological as lamellar multilayer and rich in hydrophilic functional groups could facilitate the formation of thick electroactive biofilms and enrich Geobacter with the highest abundance of 92.3%. The CLX material is expected to be the ideal electrode for high performance and functionally controllability.

A three-dimensional phenolic-based carbon anode for microbial electrochemical system with customized macroscopic pore structure to promote interior bacteria colonization

Microbial electrochemical system (MES) is an emerging wastewater treatment technology that compensates the energy demands of containments removal by in situ converting the chemical energy of organic pollutants. As the structure for exoelectrogens and the reaction site of extracellular electron transfer (EET), the anode is essential for MES. The future commercial application of MES requires efficiency and large-scale fabrication available anode. In this study, a 3D anode with millimeter-scale pores (3D-MPA) was successfully constructed by sacrificial template method, with low-cost phenolic resin as carbon precursor and polymethyl methacrylate (PMMA) pellets as template. With customized and ordered pore of 1 mm, the 3D-MPAs allowed the microorganisms to colonize inside, improving anodic space utilization efficiency. Different carbonization temperature in tested range from 700 °C to 1000 °C regulated the micrometer-scale convex structures and surface roughness of 3D-MPAs, causing electrochemical performance changes. The 3D-MPA-900 obtained the largest electroactive surface area (102 ± 4.1 cm²) and smallest ohmic resistance (1.8 ± 0.09 Ω). Equipped with MES, 3D-MPA-900 reached the highest power density and current density (2590 ± 25 mW m^-2 and 5.20 ± 0.07 A m^-2). Among tested 3D-MPA, the excellent performance of 3D-MPA-900 might be attributed by its convex structures with suitable size and surface coverage. The surface roughness of 3D-MPA-900 enhanced the microorganism adherence, which then promoted EET on anode surface. Generally, phenolic-based 3D-MPA made of sacrificial-template method had controllable porous structure, large-scale fabrication availability, high chemical stability and excellent mechanical property, which could be promising for the commercial application of MES.

Enhanced performance and electron transfer of sulfur-mediated biological process under polyethylene terephthalate microplastics exposure

Microplastics are ubiquitous in estuaries, coasts, sewage and wastewater treatment plants (WWTPs), which could arouse unexpected effects on critical microbial processes in wastewater treatment. In this study, polyethylene terephthalate microplastics (PET-MPs) were selected to investigate the mechanism of its influence on the performance of sulfur-mediated biological process from the perspective of microbial metabolic activity, electron transfer capacity and microbial community. The results indicated that the exposure of 50 particles/L PET-MPs improved the chemical oxygen demand (COD) and sulfate removal efficiencies by 6.6 ± 0.5% and 4.5 ± 0.3%, respectively, due to the stimulation of microbial metabolic activity and the enrichment of sulfate-reducing bacteria (SRB) species, such as Desulfobacter. In addition, we found that the PET-MPs promoted Cytochrome C (Cyt C) production and improved the direct electron transfer (DET) capacity mediated by Cyt C. The long-term presence of PET-MPs stimulated the secretion of extracellular polymeric substance (EPS), especially the proteins and humic substances, which have been verified to be electroactive polymers to act as electron shuttles to promote the interspecies electron transfer pathway in sulfur-mediated biological process. Meanwhile, the transformation products (bis-(2-hydroxyethyl) terephthalate (BHET) and Mono (2-hydroxyethyl) terephthalic acid (MHET) of PET-MPs were detected in sulfur-mediated biological process. These findings indicate that the sulfur-mediated biological process has good adaptability to the toxicity of PET-MPs, which strengthens a deeper understanding of the dual function of microplastics in WWTPs.

Paracetamol degradation pathways in soil after biochar addition

Little is known about the effect of biochar on the degradation of paracetamol in soil, considering the ubiquity of this pollutant in the environment. Given the importance of the electrochemical properties of biochar for contaminant remediation, we investigated the influence of raw and designer redox-active biochars on paracetamol degradation in soil. Metabolite quantification indicated that a minimum of 53% of the spiked paracetamol was transformed in biochar-amended soil, resulting in the accumulation of different degradation products. The identification of these products allowed us to chart paracetamol degradation pathways in soil with and without biochar amendment. Some of the major degradation routes were observed to proceed via catechol and phenol, despite being previously described as having only a minor role in paracetamol metabolism. Additionally, a new transformation route from paracetamol to NAPQI was discovered in anaerobic soil originating from direct redox reactions on the surface of the designer biochars. These results may contribute to change our understanding of the environmental fate of paracetamol in soil and the role of biochar in its biodegradation.

Strategy to enhance semi-continuous anaerobic digestion of food waste by combined use of calcium peroxide and magnetite

Optimizing methane production from food waste (FW) efficiently is always a hot topic in the field of anaerobic digestion (AD). In this study we aimed to improve the conversion of organics to methane by using CaO₂ and magnetite to enhance the semi-continuous AD of food waste. Under the organic load of 2.5 g VS/L·d^-1, the specific methane yield was increased from 333.9 mL CH₄/g·VS to 423.4 mL CH₄/g·VS by adding 0.01 g/L CaO₂ with 0.4 g/L magnetite, improving the production of methane from FW. We assessed reactor performance, ORP changes, mass balance, enzyme activities and characterized the metagenomic profile of microorganisms involved in digestion. These microorganisms showed rapid conversion of volatile fatty acids and increased expression of genes related to hydrolysis and acid production. Thus, the addition of CaO₂ and magnetite optimized the relationship between fermentation bacteria and methanogenic archaea to enhance the overall production of methane. Microorganisms evolved unique adaptive mechanisms in the co-operative environment of CaO₂ and magnetite, as their energy metabolism patterns combined those controlled by individual CaO₂ and magnetite addition. This method of combining a micro-aeration environment with conductive materials provides a new perspective for optimizing the AD of FW.

Overcoming biochar limitations to remediate pentachlorophenol in soil by modifying its electrochemical properties

In this study, we produced modified biochars with enhanced electrochemical properties to increase PCP remediation in soil. Although all biochars enhanced PCP remediation in aerobic conditions, only a few did in anaerobic soil. The most successful modifications were (i) the preloading of biomass with 10% w/w FeCl₃, to obtain a biochar rich in redox-active metals (B-Fe); (ii) the oxidation of a conductive biochar pyrolyzed at 1000 ºC with 0.025 M KMnO₄, to produce a biochar with both moderate conductivity and redox capacity (B-1000-KMnO₄); and (iii) KMnO₄ oxidation of an amorphous biochar pyrolyzed at 400 ºC to obtain a biochar with very high redox capacity (B-KMnO₄). B-Fe reduced extractable PCP to almost zero after 50 days in both incubations, but showed slow kinetics of remediation in aerobic soil. B-1000-KMnO₄ had the highest rate of remediation under aerobic conditions, but no significant effect under anaerobic conditions. B-KMnO₄, however, presented high rates of remediation and high removal of extractable PCP under both conditions, which made it the recommended modification strategy for increased PCP remediation. We found that the degree of remediation primarily depends on the redox capacity, while the rate of remediation was determined by both the conductivity and redox capacity of biochar.

Enhanced bio-photodegradation of p-chlorophenol by CdS/g-C3N4 3D semiconductor-microbe interfaces

p-chlorophenol (p-CP), one of the highly toxic chlorinated organic compounds, is recalcitrant in conventional biodegradation process. This study reported a synergistic degradation protocol of 3D semiconductor-microbe interfaces, in which graphite felts (GF) and CdS/g-C₃N₄ nanocomposites were chosen as the carrier and semiconductor for enhanced p-CP degradation. Based on microstructure, photoelectrochemical and degradation performance analysis, the optimal CdS content in CdS/g-C₃N₄ nanocomposites was 10 wt%. The efficiencies of p-CP and TOC removal in bio-photodegradation system were as high as 95% and 77% without extra electron acceptors/donors, which were far better than those in traditional photodegradation and biodegradation system. High-throughput sequencing analysis suggested that p-CP degradation related species (Chryseobacterium, Stenotrophomonas and Rhodopseudomonas), electroactive species (Chryseobacterium, Stenotrophomonas, Hydrogenophaga and Cupriavidus) and hydrogen-utilizing species (Hydrogenophaga and Cupriavidus) were enriched at 3D semiconductor-microbe interfaces. The enrichment of functional species played a crucial role for p-CP removal and mineralization at 3D semiconductor-microbe interfaces. Moreover, the mechanism of enhanced p-CP bio-photodegradation at 3D semiconductor-microbe interfaces was investigated by utilizing Phylogenetic Investigation of Communities by Reconstruction of Unobserved States 2 (PICRUSt2). The results showed that the genes involved in p-CP biodegradation, hydrogen metabolism and extracellular electron transfer were remarkably enriched. Possible mechanism for enhancement of p-CP degradation in bio-photodegradation system was proposed, in which photocatalytic H₂ and photoelectron transfer played an important role for enhancing p-CP mineralization by microbes. 3D semiconductor-microbe interfaces could maintain excellent performance for p-CP degradation after long-term operation, which provide a potential alternative for the enhanced treatment of wastewater containing p-CP.

Nanoscaled and Atomic Ruthenium Electrocatalysts Confined Inside Super-Hydrophilic Carbon Nanofibers for Efficient Hydrogen Evolution Reaction

A series of Ru-based catalysts have been developed for the hydrogen evolution reaction (HER) by the facile impregnation of copious and eco-friendly bacterial cellulose (BC) with Ru(bpy)₃ Cl₂ (bpy = 2,2'-bipyridine) followed by pyrolysis. After the oxidation and molecular recomposition processes that occur within the BC precursors during pyrolysis, sub-2 nm Ru nanoparticles (NPs) and atomic Ru species confined within surface-oxidized N-doped carbon nanofibers (CNFs) can be observed in the derived catalysts. The surface oxidation of CNFs leads the derived catalysts with super hydrophilicity and water-absorbing capacity, and also provides dimensional confinement for the nanoscaled and atomic Ru species. With these added structural advantages and the component synergy, the derived catalysts show superior HER activities, for which the overpotentials are as low as 19.6 mV (1 m KOH) and 55.0 mV (0.5 m H₂ SO₄ ) for the most active case at the current density of 10 mA cm^-2 . Moreover, superior HER activity can be also achieved for the catalysts derived with a wide range of Ru loadings. Finally, the influence of Ru NP size on HER activity is investigated by density functional theory simulations. This method provides a reliable protocol for preparing highly active HER catalysts for scale-up applications.

Operation mechanism of constructed wetland-microbial fuel cells for wastewater treatment and electricity generation: A review

Constructed wetland-microbial fuel cells (CWL-MFCs) are eco-friendly and sustainable technology, simultaneously implementing contaminant removal and electricity production. According to intensive research over the last five years, this review on the operation mechanism was conducted for in-depth understanding and application guidance of CWL-MFCs. The electrochemical mechanism based on anodic oxidation and cathodic reduction is the core for improved treatment in CWL-MFCs compared to CWLs. As the dominant bacterial community, the abundance and gene-expression patterns of electro-active bacteria responds to electrode potentials and contaminant loadings, further affecting operational efficiency of CWL-MFCs. Plants benefit COD and N removal by supplying oxygen for aerobic degradation and rhizosphere secretions for microorganisms. Multi-electrode configuration, carbon-based electrodes and rich porous substrates affect transfer resistance and bacterial communities. The possibilities of CWL-MFCs targeting at recalcitrant contaminants like flame retardants and interchain interactions among effect components need systematic research.

Syntrophic metabolism of phenol in the anodic degradation within a Phenol-Cr(VI) coupled microbial electrolysis cell

Bioelectrochemical system (BESs) has been applied to treat refractory wastewaters such as phenolic wastewater since microbial anodic oxidation driven by electroactive bacteria is believed to enhance decomposition of organic matters. Considering that most of electroactive bacteria are sensitive to phenol and cannot utilize it directly, it was assumed that fermentative bacteria and electroactive bacteria in mixed-culture BESs cooperated to degrade phenol. To clarify this assumption, a microbial electrolysis cell (MEC) for phenol degradation with Cr(VI)-reduction bio-cathode was developed in this study. Results showed that phenol served as anodic electron donor was more efficient than acetate for cathodic reduction of Cr(VI) since the slow release of acetate from phenol degradation with fermentative bacteria might make full use of acetate as electron donor for anodic oxidation. The production of quorum sensing (QS) signal molecules were higher in phenolic anolyte, confirming the syntrophic metabolism among phenol-degrading bacteria and electroactive bacteria. Cyclic voltammetry (CV) test and Fourier transform infrared spectroscopy (FT-IR) indicated that phenolic anolyte and anodic sludge had higher electron transfer ability due to enhanced bio-electrochemisty processes in syntrophic metabolism.