Efficacy of zero nitrous oxide emitting aerobic denitrifying bacterium, Methylobacterium gregans DC-1 in nitrate removal with strong auto-aggregation property

Aerobic denitrifying bacterial community with low C/N ratio remove nitrate from micro-polluted water: Metagenomics unravels denitrification pathways

The efficient nitrogen removal from micro-polluted source water is an international challenge to be solved urgently. However, the inner denitrification mechanism of native aerobic denitrifying bacterial communities in response to carbon scarcity remains relatively unclear. Here, the bacterial community XT6, screened from an oligotrophic reservoir, exhibited aerobic denitrifying capacity under low-carbon environments. Up to 76.79-81.64 % of total organic carbon (TOC) and 51.48-67.60 % of NO3--N were removed by XT6 within 48 h at C/N ratios of 2.0-3.0. Additionally, the nitrogen balance experiments further manifested that 26.27-38.13 % of NO3--N was lost in gaseous form. As the C/N ratio decreased, XT6 tended to generate more extracellular polymeric substances (EPS), with the tightly bound EPS showing the largest increase. Pseudomonas and Variovorax were quite abundant in XT6, constituting 59.69 % and 28.65 % of the total sequences, respectively. Furthermore, metagenomics analysis evidenced that XT6 removed TOC and nitrate mainly through the tricarboxylic acid cycle and aerobic denitrification. Overall, the abovementioned results provide a deeper understanding of the nitrogen metabolic pathways of indigenous aerobic denitrifying bacterial communities with low C/N ratios and offer useful guidance for controlling nitrogen pollution in oligotrophic ecosystems.

Nitrogen removal intensification of biofilm through bioaugmentation with Methylobacterium gregans DC-1 during wastewater treatment

The increasing concern for environmental remediation has led to a search for effective methods to remove eutrophic nutrients. In this study, Methylobacterium gregans DC-1 was utilized to improve nitrogen removal in a sequencing batch biofilm reactor (SBBR) via aerobic denitrification. This bacterium has the extraordinary characteristics of strong auto-aggregation and a high ability to remove nitrogen efficiently, making it an ideal candidate for enhanced treatment of nitrogen-rich wastewater. This strain was used for the bioassessment of a test reactor (SBBRbio), which showed a shorter biofilm formation time compared to a control reactor (SBBRcon) without this strain inoculation. Moreover, the enhanced biofilm was enriched in TB-EPS and had a wider variety of protein secondary structures than SBBRcon. During the stabilization phase of SBBRbio, the EPS molecules showed the highest proportion of intermolecular hydrogen bonding. It is possible that bioaugmentation with this strain positively affects the structural stability of biofilm. At influent ammonia loadings of 100 and 150 mg. L-1, the average reduction of ammonia and nitrate-nitrogen was higher in the experimental system compared to the control system. Additionally, nitrite-N accumulation was lower and N2O production decreased compared to the control. Analysis of the microbial community structure demonstrated successful colonization in the bioreactor by a highly nitrogen-tolerant strain that efficiently removed inorganic nitrogen. These results illustrate the great potential of this type of denitrifying bacteria in the application of bioaugmentation systems.

Thauera sp. for efficient nitrate removal in continuous denitrifying moving bed biofilm reactor

Thauera is the most widely found dominant denitrifying genus in wastewater. In earlier study, MBBR augmented with a specially developed denitrifying five-membered bacterial consortium (DC5) where Thauera was found to be the most abundant and persistent genus. Therefore, to check the functional potential of Thauera in the removal of nitrate-containing wastewater in the present study Thauera sp.V14 one of the member of the consortium DC5 was used as the model organism. Thauera sp.V14 exhibited strong hydrophobicity, auto-aggregation ability, biofilm formation and denitrification ability, which indicated its robust adaptability short colonization and nitrate removal efficiency. Continuous reactor studies with Thauera sp.V14 in 10 L dMBBR showed 91% of denitrification efficiency with an initial nitrate concentration of 620 mg L-1 within 3 h of HRT. Thus, it revealed that Thauera can be employed as an effective microorganism for nitrate removal from wastewater based on its performance in the present studies.

Optimization of nitrogen removal conditions based on response surface methodology and nitrogen removal pathway of Paracoccus sp. QD-19

The strain Paracoccus sp. QD-19 was isolated from the sludge-water mixture of aerobic tanks at the southern wastewater treatment plant in Shenyang, China. The optimal nitrogen removal conditions for strain QD-19 were determined using the Plackett-Burman design, path of steepest ascent method, and response surface methodology (RSM). The optimum nitrogen removal conditions were C/N 12.93, temperature 37 °C, and shaking speed 175.50 r/min. Strain QD-19 achieved 83.82 ± 0.80 % nitrogen removal efficiency at 10 h under optimum conditions. Functional enzyme-encodinge genes amplified via 16S rRNA sequence analysis included amoA, hao, napA, nirS, nirK, norB, and nosZ. The results revealed that NH4+-N → NH2OH → NO2--N → NO3--N → NO2--N → NO → N2O → N2 was the pathway for heterotrophic nitrification - aerobic denitrification. The strain was used to treat wastewater from a sewage treatment plant under optimal response surface methodology conditions. As a result, the TN removal efficiency was 77.11 %. The findings demonstrated that strain QD-19 exhibits favorable potential for heterotrophic nitrification and aerobic denitrification (HN-AD) of actual wastewater, presenting a promising application for biological wastewater treatment.

Nitrous oxide emissions in novel wastewater treatment processes: A comprehensive review

The proliferation of novel wastewater treatment processes has marked recent years, becoming particularly pertinent in light of the strive for carbon neutrality. One area of growing attention within this context is nitrous oxide (N2O) production and emission. This review provides a comprehensive overview of recent research progress on N2O emissions associated with novel wastewater treatment processes, including Anammox, Partial Nitrification, Partial Denitrification, Comammox, Denitrifying Phosphorus Removal, Sulfur-driven Autotrophic Denitrification and n-DAMO. The advantages and challenges of these processes are thoroughly examined, and various mitigation strategies are proposed. An interesting angle that delve into is the potential of endogenous denitrification to act as an N2O sink. Furthermore, the review discusses the potential applications and rationale for novel Anammox-based processes to reduce N2O emissions. The aim is to inform future technology research in this area. Overall, this review aims to shed light on these emerging technologies while encouraging further research and development.

Systematic investigation of simultaneous copper biosorption and nitrogen removal from wastewater by an aerobic denitrifying bacterium of auto-aggregation

Finding effective methods for simultaneous removal of eutrophic nutrients and heavy metals has attracted increasing concerns for the environmental remediation. Herein, a novel auto-aggregating aerobic denitrifying strain (Aeromonas veronii YL-41) was isolated with capacities for copper tolerance and biosorption. The denitrification efficiency and nitrogen removal pathway of the strain were investigated by nitrogen balance analysis and amplification of key denitrification functional genes. Moreover, the changes in the auto-aggregation properties of the strain caused by extracellular polymeric substances (EPS) production were focused on. The biosorption capacity and mechanisms of copper tolerance during denitrification were further explored by measuring changes in copper tolerance and adsorption indices, as well as by variations in extracellular functional groups. The strain showed extremely strong total nitrogen removal ability, with 67.5%, 82.08% and 78.48% of total nitrogen removal when NH4+-N, NO2--N, and NO3--N were used as the only initial nitrogen source, respectively. The successful amplification of napA, nirK, norR, and nosZ genes further demonstrated that the strain accomplished nitrate removal through a complete aerobic denitrification pathway. The production of protein-rich EPS of up to 23.31 mg/g and an auto-aggregation index of up to 76.42% may confer a strong biofilm-forming potential to the strain. Under the stress of 20 mg/L copper ions, the removal of nitrate-nitrogen was still as high as 71.4%. In addition, the strain could achieve an efficient removal of 96.9% of copper ions at an initial concentration of 80 mg/L. Scanning electron microscopy and deconvolution analysis of characteristic peaks confirmed that the strains encapsulate heavy metals by secreting EPS and, meanwhile, form strong hydrogen bonding structures to enhance intermolecular forces to resist copper ion stress. This study provides an innovative and effective biological approach for the synergistic bioaugmentation removal of eutrophic substances and heavy metals from aquatic environments.

Promoting heterotrophic denitrification of Pseudomonas hunanensis strain PAD-1 using pyrite: A mechanistic study

Denitrification is critical for removing nitrate from wastewater, but it typically requires large amounts of organic carbon, which can lead to high operating costs and secondary environmental pollution. To address this issue, this study proposes a novel method to reduce the demand for organic carbon in denitrification. In this study, a new denitrifier, Pseudomonas hunanensis strain PAD-1, was obtained with properties for high efficiency nitrogen removal and trace N2O emission. It was also used to explore the feasibility of pyrite-enhanced denitrification to reduce organic carbon demand. The results showed that pyrite significantly improved the heterotrophic denitrification of strain PAD-1, and optimal addition amount was 0.8-1.6 g/L. The strengthening effect of pyrite was positively correlated with carbon to nitrogen ratio, and it could effectively reduce demand for organic carbon sources and enhance carbon metabolism of strain PAD-1. Meanwhile, the pyrite significantly up-regulated electron transport system activity (ETSA) of strain PAD-1 by 80%, nitrate reductase activity by 16%, Complex III activity by 28%, and napA expression by 5.21 times. Overall, the addition of pyrite presents a new avenue for reducing carbon source demand and improving the nitrate harmless rate in the nitrogen removal process.

Performance and mechanism of nitrate removal by the aerobic denitrifying bacterium JI-2 with a strong autoaggregation capacity

Here, a new strain JI-2 of the strongly autoaggregating aerobic denitrifying bacteria was screened. The nitrate removal ability and autoaggregation mechanism of JI-2 were analyzed using the nitrogen balance and genomics technology. The nitrate removal rate was 27.05 mg N/(L·h) at pH 9.0 and C/N 8.0. The strain JI-2 removes nitrate via the aerobic denitrification and dissimilation pathways and removes ammonium via the assimilation pathway. 66.81 % nitrate was converted to cellular components under aerobic conditions. Complex nitrogen metabolism genes were detected in strain JI-2. C-di-GMP mediates the motility behavior of JI-2 by binding the FleQ and PilZ proteins, and regulating the expression of PslA. Furthermore, the mechanism of autoaggregation was verified by extracellular polymeric substance analysis. Meanwhile, the nitrate removal rates of strain JI-2 was 11.13-12.50 mg N/(L·h) in wastewater. Thus, strain JI-2 has good prospects for application in the treatment of nitrate wastewater.

Performance and mechanism of tetracycline removal by the aerobic nitrate-reducing strain Pseudomonas sp. XS-18 with auto-aggregation

The coexistence of multiple pollutants has become a distinctive feature of water pollution. However, there are a few strains that can remove nitrate and tetracycline (TC). Here, the efficiency of strain XS-18 in removing nitrate and TC was analyzed, and the mechanism of tolerance and removal of TC was investigated by infrared spectroscopy, three-dimensional fluorescence spectroscopy, and genome analysis. XS-18 could efficiently remove TC (0.40 mg·L^-1·h^-1) at pH 7.0-11.0 with auto-aggregation. TC was removed via extracellular polymeric substance (EPS) (55.90%) and cell surface (44.10%) adsorption. TC (10 mg/L) could stimulate XS-18 to secrete more polysaccharides and hydrophobic proteins to improve its auto-aggregation ability. The findings also confirmed that TC resistance genes were present. Furthermore, the bacterial flagellum, signal transduction of the chemotactic system and regulatory genes were shown to be related to the auto-aggregation of the strain. XS-18 has potential applications in the treatment of wastewater containing nitrate and TC.

Performance of Paracoccus pantotrophus MA3 in heterotrophic nitrification-anaerobic denitrification using formic acid as a carbon source

Excess amount of nitrogen in wastewater has caused serious concerns, such as water eutrophication. Paracoccus pantotrophus MA3, a novel isolated strain of heterotrophic nitrification-anaerobic denitrification bacteria, was evaluated for nitrogen removal using formic acid as the sole carbon source. The results showed that the maximum ammonium removal efficiency was observed under the optimum conditions of 26.25 carbon to nitrogen ratio, 3.39% (v/v) inoculation amount, 34.64 °C temperature, and at 180 rpm shaking speed, respectively. In addition, quantitative real-time PCR technique analysis assured that the gene expression level of formate dehydrogenase, formate tetrahydrofolate ligase, 5,10-methylenetetrahydrofolate dehydrogenase, serine hydroxymethyltransferase, respiratory nitrate reductase beta subunit, L-glutamine synthetase, glutamate dehydrogenase, and glutamate synthase were up-regulated compared to the control group, and combined with nitrogen mass balance analysis to conclude that most of the ammonium was removed by assimilation. A small amount of nitrate and nearly no nitrite were accumulated during heterotrophic nitrification. MA3 exhibited significant denitrification potential under anaerobic conditions with a maximum nitrate removal rate of 4.39 mg/L/h, and the only gas produced was N₂. Additionally, 11.50 ± 0.06 mg/L/h of NH₄⁺-N removal rate from biogas slurry was achieved.

Efficacy of simultaneous hexavalent chromium biosorption and nitrogen removal by the aerobic denitrifying bacterium Pseudomonas stutzeri YC-34 from chromium-rich wastewater

The impact of high concentrations of heavy metals and the loss of functional microorganisms usually affect the nitrogen removal process in wastewater treatment systems. In the study, a unique auto-aggregating aerobic denitrifier (Pseudomonas stutzeri strain YC-34) was isolated with potential applications for Cr(VI) biosorption and reduction. The nitrogen removal efficiency and denitrification pathway of the strain were determined by measuring the concentration changes of inorganic nitrogen during the culture of the strain and amplifying key denitrification functional genes. The changes in auto-aggregation index, hydrophobicity index, and extracellular polymeric substances (EPS) characteristic index were used to evaluate the auto-aggregation capacity of the strain. Further studies on the biosorption ability and mechanism of cadmium in the process of denitrification were carried out. The changes in tolerance and adsorption index of cadmium were measured and the micro-characteristic changes on the cell surface were analyzed. The strain exhibited excellent denitrification ability, achieving 90.58% nitrogen removal efficiency with 54 mg/L nitrate-nitrogen as the initial nitrogen source and no accumulation of ammonia and nitrite-nitrogen. Thirty percentage of the initial nitrate-nitrogen was converted to N₂, and only a small amount of N₂O was produced. The successful amplification of the denitrification functional genes, norS, norB, norR, and nosZ, further suggested a complete denitrification pathway from nitrate to nitrogen. Furthermore, the strain showed efficient aggregation capacity, with the auto-aggregation and hydrophobicity indices reaching 78.4 and 75.5%, respectively. A large amount of protein-containing EPS was produced. In addition, the strain effectively removed 48.75, 46.67, 44.53, and 39.84% of Cr(VI) with the initial concentrations of 3, 5, 7, and 10 mg/L, respectively, from the nitrogen-containing synthetic wastewater. It also could reduce Cr(VI) to the less toxic Cr(III). FTIR measurements and characteristic peak deconvolution analysis demonstrated that the strain had a robust hydrogen-bonded structure with strong intermolecular forces under the stress of high Cr(VI) concentrations. The current results confirm that the novel denitrifier can simultaneously remove nitrogen and chromium and has potential applications in advanced wastewater treatment for the removal of multiple pollutants from sewage.

Application of aerobic denitrifier for simultaneous removal of nitrogen, zinc, and bisphenol A from wastewater

High concentrations of heavy metals and other pollutants affect microbial activity in the wastewater treatment system and impede biological denitrification process. In this study, a novel Zn(II)-resistant aerobic denitrifier (Pseudomonas stutzeri KY-37) was isolated with potential in Bisphenol A (BPA) biodegradation and removal. The capability of this denitrifier in removing nitrogen, zinc, and BPA was tested. Using 56 mg/L nitrate as the sole nitrogen source, its removal efficiency achieved 98.5% in 12 h. This novel denitrifier had a strong auto-aggregation (maximum 65.8%), a high hydrophobicity rate (maximum 88.2%), and a massive amount (maximum 41.1 mg/g cell dry weight) of extracellular polymeric substances (EPS) production. Moreover, Zn(II) removal efficiency reached more than 95% with the initial high concentrations of 200 mg/L. The maximum BPA removal efficiency reached 88.8% with initial 10 mg/L. The removal mechanism of BPA was further explored in terms of microbial degradation, EPS adsorption, and intermediate degradation products.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Mix-cultured aerobic denitrifying bacterial communities reduce nitrate: Novel insights in micro-polluted water treatment at lower temperature

Three mix-cultured aerobic denitrifiers were screened from a source water reservoir and named HE1, HE3 and SU4. Approximately 72.9%, 68.6% and 66.2% of nitrate were effectively removed from basal medium, respectively, after 120 h of cultivation at 8 °C. The nitrogen balance analysis revealed about one-fifth of the initial nitrogen was converted into gaseous denitrification products. According to the results of Biolog, the three microfloras had high metabolic capacity to carbon sources. The dominant genera were Pseudomonas and Paracoccus in these bacterial communities based on nirS gene sequencing. Response surface methodology elucidated that the denitrification rates of identified bacteria reached the maximum under the following optimal parameters: C/N ratio of 7.51-8.34, pH of 8.03-8.09, temperature of 18.03-20.19 °C, and shaking speed of 67.04-120 rpm. All results suggested that screened aerobic denitrifiers could potentially be applied to improve the source water quality at low temperature.

Mitigating NO and N2O emissions from a pilot-scale oxidation ditch using bioaugmentation of immobilized aerobic denitrifying bacteria

Nitrous oxide (N₂O) emission from wastewater treatment plants (WWTPs) requires urgent mitigation because of its significant contribution to the greenhouse effect. In this study, bioaugmentation was applied in a pilot-scale oxidation ditch with the aerobic denitrifying bacteria strain PCN-1 immobilized on polyurethane biocarriers, which demonstrated effective N₂O mitigation. Microbial community analysis suggested that the bioaugmentation facilitated a symbiotic relationship of the bacterial populations between the activated sludge and the biocarriers. The denitrifying bacteria with well-known N₂O reducing capabilities predominated on the biocarriers. Correspondingly, the increases of denitrifying genes and NO and N₂O reductase provided evidence for the enhanced genetic potential for NO and N₂O reduction. Besides, the enriched comammox Nitrospira on the biocarriers is proposed as another significant driver for N₂O mitigation by avoiding nitrite accumulation. In addition, the bioaugmentation enhanced the stability and recovery capability of the system in the ammonia overload and aeration failure shock tests.

Seeding the drainage canal of a wastewater treatment system for the natural rubber industry with rubber for the enhanced removal of organic matter and nitrogen

Current pretreatment methods for wastewater from natural rubber (NR) factories either have low rubber recovery efficiency or are costly to operate. A wastewater treatment system was developed that combines a pretreatment canal (PTC) seeded with rubber, an anaerobic baffled reactor (ABR), and a down-flow hanging sponge (DHS) reactor. The PTC is simple to implement and contributes to not only rubber recovery but also organic matter removal in the ABR and nitrogen removal in the DHS reactor. In experiments, the PTC recovered 16.6% of residual rubber through coagulation. The ABR increased the chemical oxygen demand removal efficiency and methane recovery compared with other anaerobic reactors treating raw NR wastewater. The DHS reactor removed 30.7% of total inorganic nitrogen (TIN) by nitrification, anaerobic ammonia oxidation and denitrification. Feeding the bottom stage of the DHS reactor with sodium acetate solution increased the TIN removal efficiency to 87.8%. The water quality of the final effluent achieved the Vietnamese standards for the NR industry. Microbial community analysis was performed to identify the dominant microorganisms and mechanisms in the PTC, ABR, and DHS reactor.

Efficacy of auto-aggregating aerobic denitrifiers with coaggregation traits for bioaugmentation performance in biofilm-formation and nitrogen-removal

To promote efficiency nitrogen-rich wastewater treatment from a sequencing batch biofilm reactor (SBBR), three aerobic denitrifiers (Pseudomonas mendocinaIHB602, Methylobacterium gregansDC-1 and Pseudomonas stutzeriIHB618) with dual-capacities of strong auto-aggregation and high nitrogen removal efficiency were studied. The aggregation index analysis indicated that coaggregation of the three strains co-existed was better when compared with one or two strains grown alone. Optimal coaggregation strains were used to bioaugmente a test reactor (SBBR_T), which exhibited a shorter time for biofilm-formation than uninoculated control reactor (SBBR_C). With different influent ammonia-N loads (150, 200 and 300 mg·L^-1), the average ammonia-N and nitrate-N removal efficiency were all higher than that in SBBR_C, as well as a lower nitrite-N accumulation. Microbial community structure analysis revealed coaggregation strains may successfully colonize in the bioreactor and be very tolerant of high nitrogen concentrations, and contribute to the high efficiency of inorganic nitrogen-removal and biofilm-formation.

Bacteria autoaggregation: how and why bacteria stick together

Autoaggregation, adherence between identical bacterial cells, is important for colonization, kin and kind recognition, and survival of bacteria. It is directly mediated by specific interactions between proteins or organelles on the surfaces of interacting cells or indirectly by the presence of secreted macromolecules such as eDNA and exopolysaccharides. Some autoaggregation effectors are self-associating and present interesting paradigms for protein interaction. Autoaggregation can be beneficial or deleterious at specific times and niches. It is, therefore, typically regulated through transcriptional or post-transcriptional mechanisms or epigenetically by phase variation. Autoaggregation can contribute to bacterial adherence, biofilm formation or other higher-level functions. However, autoaggregation is only required for these phenotypes in some bacteria. Thus, autoaggregation should be detected, studied and measured independently using both qualitative and quantitative in vitro and ex vivo methods. If better understood, autoaggregation holds the potential for the discovery of new therapeutic targets that could be cost-effectively exploited.

Biological nitrogen removal capability and pathways analysis of a novel low C/N ratio heterotrophic nitrifying and aerobic denitrifying bacterium (Bacillus thuringiensis strain WXN-23)

A novel heterotrophic nitrification and aerobic denitrification (HNAD) bacteria, identified as Bacillus thuringiensis strain WXN-23, was isolated from husk feed filtrate of a pig farm. It was the first report of Bacillus thuringiensis with the capability for HNAD and could adapt to the condition of low Carbon/Nitrogen (C/N) ratio. Nitrogen could be efficiently removed by the strain WXN-23 in simulated wastewater, be it in single or mixed form nitrogen sources. The nitrogen balance revealed that 63.5% of the initial nitrogen (5.32 mg) was lost in the form of N₂. The conditions for maximum total nitrogen (TN) removal efficiency (95.996%) were shaking speed of 126.89 r/min, a carbon C/N ratio of 5.91, the temperature of 32.81 °C, and a pH value of 8.17. The nitrification-denitrification metabolic pathway (NH₄⁺-N→NH₂OH→NO₂^--N→NO₃^--N→NO₂^--N→NO→N₂O→N₂) under aerobic conditions was determined on the basic of characteristic of N removal, N balance analysis, enzyme assay and functional genes amplification results. Strain WXN-23 was effective at wastewater treatment, with TN, NH₄⁺-N, NO₃^--N and NO₂^--N removal efficiencies of 82.12%, 86.74%, 90.74% and 100%, respectively.

Effect and mechanism of silver nanoparticles on nitrogen transformation in water-sediment system of a hypereutrophic lake

Industrialization and urbanization are expected to increase the release of silver nanoparticles (AgNPs) into aquatic ecosystems. However, it remains to be determined how AgNPs influence nitrogen transformation and the underlying mechanism in natural water bodies. Here, the impact of AgNPs on nitrogen cycling in water-sediment system of a hypereutrophic lake was studied and the mechanism of nitrogen transformation was investigated in terms of the nitrogen functional enzymes and genes. Following 7 days of water-sediment microcosm experiments, the levels of total nitroten (TN) and organic nitrogen (OrgN) were significantly increased by 50 mg/L Ag⁺ treatment when compared with the non-Ag control (P < 0.05). In contrast, the levels of TN and Org-N were both slightly decreased by AgNPs treatments (0.5 and 50 mg/L). Additionally, the levels of NO₃^--N were evidently reduced with the presence of AgNPs (P < 0.05). Further, our data proved that enzymes and those enzyme encoding genes involved in the nitrogen transformation may directly responsible for the alterations of nitrogen transformation. Overall, our work suggested that the short-term exposure to AgNPs might cause hormetic effects on nitrogen-transforming microorganisms in hypereutrophic lakes, and have a potential to result in non-negligible changes in the nitrogen cycling of hypereutrophic lakes.

Nitrogen removal bacterial strains, MSNA-1 and MSD4, with wide ranges of salinity and pH resistances

Nitrogenous wastewater is difficult to treat using conventional microorganisms in high salinity and acidic/alkaline environments. Two halotolerant bacteria, heterotrophic nitrifying Stenotrophomonas sp. MSNA-1 and aerobic denitrifying Pseudomonas sp. MSD4, were isolated, and the amplification of functional genes provided the evidences of nitrogen removal performance. The results regarding salinity and pH resistance showed that strain MSNA-1 is robust at salinities of 0-15% and pH of 3-10. It can remove 51.2% of NH₄⁺-N (180 mg/L) at salinity of 10% (pH: 7) and 49.2% of NH₄⁺-N under pH 4 (salinity: 3%). For strain MSD4, it is robust at salinities of 0-10% and pH of 5-11. It can remove 62.4% of TN (100 mg/L) at salinity of 7% (pH: 7) and 72.2% of TN under pH 9 (salinity: 3%). Their excellent salinity and pH resistances make them promising candidates for treating nitrogenous wastewaters under extreme conditions with low operational cost.

Bioaugmentation treatment of nitrogen-rich wastewater with a denitrifier with biofilm-formation and nitrogen-removal capacities in a sequencing batch biofilm reactor

A strain with efficient biofilm-formation and aerobic denitrification capabilities was isolated and identified as Pseudomonas mendocina IHB602. In pure culture, strain IHB602 removed almost all NO₃^--N, NO₂^--N, and NH₄⁺-N (initial concentrations 50 mg/L) within 24 h. The strain produced large amounts of extracellular polymeric substances (maximum 430.33 mg/g cell dry weight) rich in protein but containing almost no humic acid. This, and strong autoaggregation (maximum 47.09%) and hydrophobicity (maximum 85.07%), imparted strain IHB602 with biofilm forming traits. A sequencing batch biofilm reactor bioaugmented with strain IHB602 (SBBR1) had more rapid biofilm-formation than the control without strain IHB602 inoculation (SBBR2). During the stabilization period, the effluent removal ratios for NH₄⁺-N (95%), NO₃^--N (91%) and TN (88%) in SBBR1 were significantly higher than those in SBBR2 (NH₄⁺-N: 91%, NO₃^--N: 88%, TN: 82%). Microbial community structure analysis revealed that strain IHB602 successfully proliferated and contributed to nitrogen removal as well as biofilm formation.