Oxygen-rich biochar from torrefaction: A versatile adsorbent for water pollution control

Agro-industrial residue torrefaction to bio-coal: Its physico-chemical characterization and potential applications in energy and environmental protection

Leveraging biofuel derived from biomass stands as a pivotal strategy in reducing CO2 emissions and mitigating the greenhouse effect. Biomass serves as a clean, renewable energy source, offering inherent benefits. However, despite its advantages, biomass encounters obstacles hindering its widespread industrial applications, including its relatively low calorific value, limited grindability, high water content, and susceptibility to corrosion. The torrefaction process has garnered significant attention as an effective method for enhancing the quality of raw biomass for energy production. In this review, we briefly discussed the mechanism of bio-coal preparation using biomass, physico-chemical characterization of different torrefied feedstocks, and the effect of torrefaction parameters, along with the effect of the different types of reactors on biomass torrefaction. Furthermore, bio-coal's emission characteristics and fuel quality throughout the thermal treatment have been covered. Thus, bio-coal finds a wide range of applications in sustainable energy generation, environmental remediation, agri-food development, polymer composites, and others.

The surface functional groups-driven fast and catalytic degradation of naproxen on sludge biochar enhanced by citric acid

In this work, a sludge biochar (CA-SBC-300) with efficient activation of peroxymonosulfate (PMS) was prepared by citric acid modification. CA-SBC-300 achieved efficient degradation of naproxen (NPX) (95.5%) within 10 min by activating PMS. This system was highly resilient to common disruptive factors such as inorganic anions, humic acid (HA) and solution pH. The results of XPS and Raman showed that the content of oxygenated functional groups (OFGs) and the degree of defects on the sludge biochar increased after citric acid modification, which may be an important reason for the enhanced catalytic performance of SBC. In the CA-SBC-300/PMS system, 1O2 and O2•- made the main contributions to the degradation of NPX. XPS analysis and DFT calculations demonstrated that C=O/C-O and pyridine N on CA-SBC-300 were the crucial active sites for PMS activation. According to the results of UPLC-MS analysis, three possible pathways for NPX degradation were inferred. This study provided a feasible strategy for sludge resource utilization combined with efficient catalytic degradation of toxic organic contaminants in wastewater.

Prediction of Biochar Adsorption of Uranium in Wastewater and Inversion of Key Influencing Parameters Based on Ensemble Learning

With the rapid development of industrialization, the problem of heavy metal wastewater treatment has become increasingly serious, posing a serious threat to the environment and human health. Biochar shows great potential for application in the field of wastewater treatment; however, biochars prepared from different biomass sources and experimental conditions have different physicochemical properties, resulting in differences in their adsorption capacity for uranium, which limits their wide application in wastewater treatment. Therefore, there is an urgent need to deeply explore and optimize the key parameter settings of biochar to significantly improve its adsorption capacity. This paper combines the nonlinear mapping capability of SCN and the ensemble learning advantage of the Adaboost algorithm based on existing experimental data on wastewater treatment. The accuracy of the model is evaluated by metrics such as coefficient of determination (R2) and error rate. It was found that the Adaboost-SCN model showed significant advantages in terms of prediction accuracy, precision, model stability and generalization ability compared to the SCN model alone. In order to further improve the performance of the model, this paper combined Adaboost-SCN with maximum information coefficient (MIC), random forest (RF) and energy valley optimizer (EVO) feature selection methods to construct three models, namely, MIC-Adaboost-SCN, RF-Adaboost-SCN and EVO-Adaboost-SCN. The results show that the prediction model with added feature selection is significantly better than the Adaboost-SCN model without feature selection in each evaluation index, and EVO has the most significant effect on feature selection. Finally, the correlation between biochar adsorption properties and production parameters was discussed through the inversion study of key parameters, and optimal parameter intervals were proposed to improve the adsorption properties. Providing strong support for the wide application of biochar in the field of wastewater treatment helps to solve the urgent environmental problem of heavy metal wastewater treatment.

Efficient arsenic removal from water using iron-impregnated low-temperature biochar derived from henequen fibers: performance, mechanism, and LCA analysis

The present study aims to investigate the low-energy consumption and high-efficiency removal of arsenic from aqueous solutions. The designed adsorbent Fe/TBC was synthesized by impregnating iron on torrefaction henequen fibers. Isothermal adsorption experiments indicated maximum adsorption capacities of 7.30 mg/g and 8.98 mg/g for arsenic(V) at 25.0 °C and 40.0 °C, respectively. The interference testing showed that elevated levels of pH, HCO3- concentration, and humic acid content in the solution could inhibit the adsorption of arsenic by Fe/TBC. Characterization of the adsorbent before and after adsorption using FTIR and SEM-EDS techniques confirmed arsenic adsorption mechanisms, including pore filling, electrostatic interaction, surface complexation, and H-bond adhesion. Column experiments were conducted to treat arsenic-spiked water and natural groundwater, with effective treatment volumes of 550 mL and 8792 mL, respectively. Lastly, the life cycle assessment (LCA) using OpenLCA 2.0.3 software was performed to treat 1 m3 of natural groundwater as the functional unit. The results indicated relatively significant environmental impacts during the Fe/TBC synthesis stage. The global warming potential resulting from the entire life cycle process was determined to be 0.8 kg CO2-eq. The results from batch and column experiments, regeneration studies, and LCA analysis indicate that Fe/TBC could be a promising adsorbent for arsenic(V).

Efficient adsorption of hexavalent chromium in water by torrefaction biochar from lignin-rich kiwifruit branches: The combination of experiment, 2D-COS and DFT calculation

A biochar (KBC) enriched with O functional groups was prepared by torrefaction using lignin-rich kiwifruit branches (KBM) as a raw material, which was characterized, and then KBC was used to adsorb hexavalent chromium (Cr6+) from water. The results showed that KBC contained more functional groups compared to KBM. The maximum adsorption of Cr6+ by KBC could reach 143.64 mg·g-1 and also had better adsorption performance than other adsorbents reported in some other reports. Cr6+ absorption by KBC was mainly a mechanism of electrostatic interaction and adsorption-reduction coupling. FTIR and XPS revealed that -OH, -COOH, CO and CC on KBC participated in Cr6+ adsorption and new groups (C=O) were generated during the process of adsorption, which implied that a redox reaction occurred. 2D-COS and DFT calculations showed that the order of functional groups on KBC interacting with Cr6+ was -OCH3 > -COOH > -OH > phenolic hydroxyl, and the binding tightness of the different functional groups to Cr6+ was -OCH3 (the shortest displacement of both groups after the adsorption) > -COOH > -OH > phenolic hydroxyl. KBC has good regeneration performance, and it is a good adsorbent for Cr6+.

Boosting Water Retention in Agriculture: Vine Biochar-Doped Hydrogels' Swelling and Germination Effects

Water scarcity presents a formidable challenge to agriculture, particularly in arid, semiarid, and rainfed settings. In agricultural contexts, hydrogels serve as granular agents for water retention, undergoing considerable expansion upon water exposure. They assume versatile roles encompassing soil-water retention, the dispensation of nutrients and pesticides, seed encapsulation, erosion mitigation, and even food supplementation. This study's objective involves the examination of biochar-infused hydrogels, fashioned by incorporating vine pruning waste-derived biochars, and the assessment of swelling behaviors in various aqueous environments encompassing deionized, tap, and saline water at concentrations of 0.5-1%. Characterizations of the vine-biochars-VB and biochar-incorporated hydrogels-VBHG are executed, with particular attention to their swelling properties across diverse media. As an initial step toward appraising their agricultural relevance, these hydrogels are introduced to a germination medium featuring wheat seeds to discern potential influences on germination dynamics. The maximum swelling capacity of VBHG is recorded in deionized water, tap water at pH 7.0, tap water at pH 9.0, saline water at 0.5%, and saline water at 1%, reaching 352%, 207%, 230%, 522%, and 549%, respectively. Remarkably, the 0.5% VBHG treatment exhibits the most pronounced root elongation. The application of hydrogels in agriculture exhibits promise, particularly within drought-related contexts and potential soilless applications.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Low-temperature biochar production from torrefaction for wastewater treatment: A review

Biochar, a carbon-rich and por ous material derived from waste biomass resources, has demonstrated tremendous potential in wastewater treatment. Torrefaction technology offers a favorable low-temperature biochar production method, and torrefied biochar can be used not only as a solid biofuel but also as a pollutant adsorbent. This review compares torrefaction technology with other thermochemical processes and discusses recent advancements in torrefaction techniques. Additionally, the applications of torrefied biochar in wastewater treatment (dyes, oil spills, heavy metals, and emerging pollutants) are comprehensively explored. Many studies have shown that high productivity, high survival of oxygen-containing functional groups, low temperature, and low energy consumption of dried biochar production make it attractive as an adsorbent for wastewater treatment. Moreover, used biochar's treatment, reuse, and safe disposal are introduced, providing valuable insights and contributions to developing sustainable environmental remediation strategies by biochar.

The critical impacts of pyrochar during 2,4,6-trichlorophenol photochemical remediation process: Cooperation between persistent free radicals and oxygenated functional groups

The widespread use of polychlorophenols poses enormous environmental challenges. Biochar has the potential to accelerate the transformation of polychlorophenols. But the biochar-triggered photochemical decomposition mechanism of polychlorophenols still remains unclear. Herein, the photochemical behavior of pyrochar was comprehensively investigated in 2,4,6-trichlorophenol (TCP) remediation. Researches revealed that persistent free radicals (PFRs) and oxygenated functional groups (OFGs) on the surface of pyrochar cooperatively promoted ROS generation for TCP degradation. PFRs performed a key role of electron-donating and energy transfer in ROS conversion, especially in the activation of H₂O₂ into •OH. The hydroxyl groups of photosensitive components of pyrochar were photo-excited and provided electrons for enhanced ROS formation as well. With photogenerated ROS involved, more TCP was decomposed through dechlorination under light irradiation than that in the dark, in which ¹O₂, •OH, and •O₂^- were the dominant active species. During this process, stronger light intensities (3 W/m²) and shorter light wavelengths (400 nm) can provide more energy for the activation of PFRs and OFGs, promoting the decomposition of TCP. This work casts a new light on the environmental roles of pyrochar in the photochemical removal of polychlorophenol pollutants.

A critical review on the development of lanthanum-engineered biochar for environmental applications

Biochar and lanthanum (La) have been widely used in environment. However, there is a lack of knowledge and perspective on the development of La-engineered biochar (LEB) for environmental applications. This review shows that LEBs with a variety of La species via pre-/post-doping routes are developed for environmental applications. Specifically, precipitation, gelation, and calcination are the common sub-processes involved in the pre-/post-doping of La on the resultant LEB. The dominant La species for LEBs is La(OH)₃, which is formed through precipitation of La ions with various bases. Various La carbonates, e.g., LaOHCO₃, La₂(CO₃)₃, La₂CO₅, and NaLa(CO₃)₂, are also involved in the preparation of LEBs. The LEBs are high-efficient in the adsorption of phosphate, arsenic, antimonate and fluoride ions, attributed to the strong affinity of La to oxyanions and Lewis hard base. Lanthanum is also favorable for co-doping with transition metal species to further enhance the performances in adsorption or catalysis. This review also analyzes the prospects and future challenges for the preparation and application of LEBs in environment. Finally, this review is beneficial to inspire new breakthroughs on the preparation and environmental application of LEBs.

Adsorptive and photocatalytic remediation of hazardous organic chemical pollutants in aqueous medium: A review

The provision of clean water is still a major challenge in developing parts of the world, as emphasized by the United Nation Sustainable Development Goals (SDG 6), and has remained a subject of extensive research globally. Advancements in science and industry have resulted in a massive surge in the amount of industrial chemicals produced within the last few decades. Persistent and emerging organic pollutants are detected in aquatic environments, and conventional wastewater treatment plants have ineffectively handled these trace, bioaccumulative and toxic compounds. Therefore, we have conducted an extensive bibliometric analysis of different materials utilized to combat organic pollutants via adsorption and photocatalysis. The classes of pollutants, material synthesis, mechanisms of interaction, merits, and challenges were comprehensively discussed. The paper highlights the advantages of various materials used in the removal of hazardous pollutants from wastewater with activated carbon having the highest adsorption capacity. Dyes, pharmaceuticals, endocrine-disrupting chemicals, pesticides and other recalcitrant organic pollutants have been successfully removed at high degradation efficiencies through the photocatalytic process. The photocatalytic degradation and adsorption processes were compared by considering factors such as cost, efficiency, ease of application and reusability. This review will be good resource material for water treatment professionals/scientists, who may be interested in adsorptive and photocatalytic remediation of organic chemicals pollutants.

Progress in valorisation of agriculture, aquaculture and shellfish biomass into biochemicals and biomaterials towards sustainable bioeconomy

The recurrent environmental and economic issues associated with the diminution of fossil fuels are the main impetus towards the conversion of agriculture, aquaculture and shellfish biomass and the wastes into alternative commodities in a sustainable approach. In this review, the recent progress on recovering and processing these biomass and waste feedstocks to produce a variety of value-added products via various valorisation technologies, including hydrolysis, extraction, pyrolysis, and chemical modifications are presented, analysed, and discussed. These technologies have gained widespread attention among researchers, industrialists and decision makers alike to provide markets with bio-based chemicals and materials at viable prices, leading to less emissions of CO₂ and sustainable management of these resources. In order to echo the thriving research, development and innovation, bioresources and biomass from various origins were reviewed including agro-industrial, herbaceous, aquaculture, shellfish bioresources and microorganisms that possess a high content of starch, cellulose, lignin, lipid and chitin. Additionally, a variety of technologies and processes enabling the conversion of such highly available bioresources is thoroughly analysed, with a special focus on recent studies on designing, optimising and even innovating new processes to produce biochemicals and biomaterials. Despite all these efforts, there is still a need to determine the more cost-effective and efficient technologies to produce bio-based commodities.

Tuning oxygenated functional groups on biochar for water pollution control: A critical review

Biochar has attracted increasing attention in water pollution control, attributed to its various merits, e.g., tunable physico-chemical properties. The oxygenated functional groups (OFGs) on biochar are key active sites for removing pollutants from water through interfacial adsorption/redox reaction. However, there is still a lack of comprehensive knowledge and perspective on tuning OFGs on biochar for enhanced performance in water pollution control. Here, this review highlighted the mechanisms of biochar OFGs in water pollution control, analyzed the strategies and mechanisms for tuning OFGs on biochar, and investigated the performances of biochars with tuned OFGs in removing inorganic/organic pollutants via adsorption/redox reactions. Specifically, strategies for tuning OFGs on biochar are far more than the well-recognized ex-situ oxidation of pristine biochar. These strategies include in-situ low temperature preservation of hydroxyl and carboxyl, in-/ex-situ oxidation of biochar, and in-/ex-situ grafting of carboxyl on biochar via cycloaddition/acylation reaction. The resultant biochars showed enhanced performances in adsorption (mainly mediated by hydroxyl, carboxyl and ketone through surface complexation, H-bonding, and electrostatic attraction) and redox reaction (mainly mediated by redox-active hydroxyl and ketone). Finally, this review presented future directions on developing biochar with specially tuned surface OFGs as a sustainable high-performance adsorbent/carbocatalyst for water pollution control.

Review of organic and inorganic pollutants removal by biochar and biochar-based composites

Biochar (BC) has exhibited a great potential to remove water contaminants due to its wide availability of raw materials, high surface area, developed pore structure, and low cost. However, the application of BC for water remediation has many limitations. Driven by the intense desire of overcoming unfavorable factors, a growing number of researchers have carried out to produce BC-based composite materials, which not only improved the physicochemical properties of BC, but also obtained a new composite material which combined the advantages of BC and other materials. This article reviewed previous researches on BC and BC-based composite materials, and discussed in terms of the preparation methods, the physicochemical properties, the performance of contaminant removal, and underlying adsorption mechanisms. Then the recent research progress in the removal of inorganic and organic contaminants by BC and BC-based materials was also systematically reviewed. Although BC-based composite materials have shown high performance in inorganic or organic pollutants removal, the potential risks (such as stability and biological toxicity) still need to be noticed and further study. At the end of this review, future prospects for the synthesis and application of BC and BC-based materials were proposed. This review will help the new researchers systematically understand the research progress of BC and BC-based composite materials in environmental remediation.

High effective adsorption of Pb(II) from solution by biochar derived from torrefaction of ammonium persulphate pretreated bamboo

Biochar was prepared by torrefaction of ammonium persulphate pretreated bamboo (labeled as APBC) and applied into elimination of Pb(II) from water solutions. APBC was characterized by N₂ adsorption-desorption isotherms, elemental and Zeta potential analyses, SEM-EDS, XPS, and FTIR. Abundant N- and O-containing groups appeared atop APBC. Batch sorption assays revealed that APBC had high affinity and strong sorption ability towards Pb(II). The high Pb(II) adsorbing ability was attributed to the high contents of N- and O-containing functional groups of APBC. The adsorption mechanism mainly occurred by inner-sphere surface complexation. Hence, torrefaction of ammonium persulphate pretreated bamboo is a promising strategy for producing efficient biochar that is applicable for industrial wastewater treatment.

Improvement effect of pyrolyzed agro-food biochar on the properties of magnesium phosphate cement

This study extends the application of pyrolyzed biochar and investigates its influence on the mechanical, sorption and microstructure properties of magnesium phosphate cement mortar. Biochar was produced by the pyrolysis of wheat straw biomass by controlled burning and its replacement level was kept up to 1.5%. At the age of 30 days, the compressive and flexural strength of mortar containing 1.5% biochar was 17.3% and 9.0% higher as compared to the control mortar, which was associated with the micro-filler and internal reservoir effect of biochar particles. Inclusion of biochar considerably improved the resistance of magnesium phosphate cement in the water environment. Sorptivity and water absorption of mortar containing 1.5% biochar was reduced by 33.8% and 25% respectively than the control mortar. Biochar densified the microstructure of mortars by filling the microcracks and blocking the pores. X-ray diffraction and Fourier transform infrared spectroscopy did not provide any information about the formation of new hydration products. Elemental analysis of mortar samples using energy dispersive spectroscopy showed the presence of some elements, which indicates the possibility of new hydration products. Based on the positive results in this study, future study will include the detailed chemical effect of biochar on magnesium phosphate cement.

Biochar for Wastewater Treatment—Conversion Technologies and Applications

Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Post-engineering of biochar via thermal air treatment for highly efficient promotion of uranium(VI) adsorption

Biochar from pyrolysis/gasification is relatively poor in oxygen-containing groups and low in micro/mesoporosity, which constrains its adsorption performance. Here, thermal air treatment (TAT) at a mild condition (300 °C in air) was applied to oxygenate the surfaces of various biochars and modify their pore structures for the promotion of their uranium (U(VI)) adsorptions. Results showed that TAT had a high product yield (>76%), increased the O contents, O/C ratios and O-containing groups in biochars, and substantially developed the micro/mesoporosities of biochars. Batch adsorption results showed that TAT remarkably improved U(VI) adsorption capacities of various biochars. Specifically, the maximum U(VI) adsorption capacities of ash-poor corn cob biochar and ash-rich sewage sludge biochar were increased by 137% to 163 mg/g and 23% to 97 mg/g, respectively. Thus, TAT might be a promising strategy to engineer various biochars for adsorptive applications.