Thermal oxidation activation of hydrochar for tetracycline adsorption: the role of oxygen concentration and temperature

Hydrochars derived from real organic wastes as carbonaceous precursors of activated carbons for the removal of NO from contaminated gas streams

The improvement of air quality in densely-populated urban regions constitutes an environmental challenge of increasing concern. In this respect, the abatement of NO emissions, primarily emanating from combustion processes associated with motor-vehicles, along with industrial/domestic combustion systems, represents one of the main problems. Here, three hydrochars from diverse organic residues were used as activated carbon precursors for their evaluation in the NO removal in two potential application scenarios. Hydrochars were physically activated at 800 °C with pure-CO2 or diluted-O2. These materials were tested in a lab-scale biofilter at different conditions (NO concentration, temperature, relative humidity, NO-containing gas and carbon particle size) and in a larger-scale biofilter to evaluate the long-term NO removal capacity. Hydrochar-derived carbons present a relatively well-developed micro- and mesoporous structure, with BET areas of up to 421 m2/g, and a variety of oxygen surface functionalities (carboxylic, lactone, carbonyl and quinone groups), especially concerning CO2-activated carbons. These exhibited an excellent behaviour at low NO concentration (5 ppmv) between 25 and 75 °C with removal capacities of ≈97 % and > 82 %, respectively; and still good-performance (≈66 %) in a more concentrated gas (120 ppmv). Whilst, carbons obtained by diluted-O2 activation from the same hydrochars, evidenced a higher removal capacity loss at high NO concentration. The O2 presence in the gas stream was confirmed as a crucial factor in the NO elimination, since both co-adsorb on the carbon surface favouring NO oxidation to NO2. Besides, the humidity in the airstream diminished the NO removal capacity from 0.88 to 0.51 mgNO/gcarbon, but still remained at 0.54 mgNO/gcarbon, when the carbon (in pellet) was operated at larger-scale biofilter in 9-fold longer test under humid air. Therefore, this study highlights the potential of renewable carbons to serve as cost-effective component in urban biofilters, to mitigate NO emissions from exhaust gases in biomass boilers and urban semi-close areas.

Conversion of rice husks into carbonaceous materials with porous structures via hydrothermal process

Carbonaceous materials hydrothermally produced using waste biomass have small specific surface areas (SSA) and poor porosity properties. In this study, we prepare a novel carbonaceous material with excellent porosity properties by suppressing the formation of a secondary char phase (spheres) and promoting biomass hydrolysis by controlling the hydrothermal conditions. Rice husk powders, as the starting material, are hydrothermally treated using acidic solvents of different types and concentrations at 180 °C. The surfaces of the samples hydrothermally prepared using the acidic solvents have no spheres. In the case of 0.1-0.2 mol L-1 hydrochloric acid (HA), the amorphous carbonaceous materials contain numerous mesopores and exhibit a larger SSA (approximately 100 m2 g-1) than those prepared using acetic acid and distilled water. An increase in the hydrothermal temperature reduces the porosity properties of the materials. Finally, the high-porosity amorphous carbonaceous material showed excellent trimethylamine adsorption ability.

Synergistic interactions and reaction mechanisms of biochar surface functionalities in antibiotics removal from industrial wastewater

Biochar, a carbon-rich material with a unique surface chemistry (high abundance of surface functional groups, large surface area, and well-distributed), has shown great potential as a sustainable solution for industrial wastewater treatment as compared to conventional industrial wastewater treatment techniques demand substantial energy consumption and generate detrimental byproducts. This critical review emphasizes the surface functionalities formation and development in biochar to enhance its physiochemical properties, for utilization in antibiotics removal. Factors affecting the formation of functionalities, including carbonization processes, feedstock materials, operating parameters, and the influence of pre-post treatments, are thoroughly highlighted to understand the crucial role of factors influencing biochar properties for optimal antibiotics removal. Furthermore, the research explores the removal mechanisms and interactions of biochar-based surface functionalities, hydrogen bonding, encompassing electrostatic interactions, hydrophobic interactions, π-π interactions, and electron donor and acceptor interactions, to provide insights into the adsorption/removal behavior of antibiotics on biochar surfaces. The review also explains the mechanism of factors influencing the removal of antibiotics in industrial wastewater treatment, including particle size and pore structure, nature and types of surface functional groups, pH and surface charge, temperature, surface modification strategies, hydrophobicity/hydrophilicity, biochar dose, pollutant concentration, contact time, and the presence of coexisting ions and other substances. Finally, the study offers reusability and regeneration, challenges and future perspectives on the development of biochar-based adsorbents and their applications in addressing antibiotics. It concludes by summarizing the key findings and emphasizing the significance of biochar as a sustainable and effective solution for mitigating antibiotics contamination in industrial wastewater.

Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH2-MIL-53(Al)-derived amine-functionalized porous carbons

Several activities such as aquaculture, human and feedstock therapies can directly release antibiotics into water. Due to high stability, low hydrolysis and non-biodegradation, they can accumulate in the aqueous environment and transport to aquatic species. Here, we synthesized amine-functionalized porous carbons (ANC) by a direct-pyrolysis process of NH2-MIL-53(Al) as a sacrificial template at between 600 and 900 °C and utilized them to eliminate chloramphenicol antibiotic from water. The NH2-MIL-53(Al)-derived porous carbons obtained high surface areas (304.7-1600 m2 g-1) and chloramphenicol adsorption capacities (148.3-261.5 mg g-1). Several factors such as hydrogen bonding, Yoshida hydrogen bonding, and π-π interaction, hydrophobic interaction possibly controlled adsorption mechanisms. The ANC800 could be reused four cycles along with high stability in structure. As a result, NH2-MIL-53(Al)-derived porous carbons are recommended as recyclable and efficient adsorbents to the treatment of antibiotics in water.

Development of calcium phosphate-chitosan composites with improved removal capacity toward tetracycline antibiotic: Adsorption and electrokinetic properties

Two eco-friendly and highly efficient adsorbents, namely brushite-chitosan (DCPD-CS), and monetite-chitosan (DCPA-CS) composites were synthesized via a simple and low-cost method and used for tetracycline (TTC) removal. The removal behavior of TTC onto the composite particles was studied considering various parameters, including contact time, pollutant concentration, and pH. The maximum TTC adsorption capacity was 138.56 and 112.48 mg/g for the DCPD-CS and DCPA-CS, respectively. Increasing the pH to 11 significantly enhanced the adsorption capacity to 223.84 mg/g for DCPD-CS and 205.92 mg/g for DCPA-CS. The antibiotic adsorption process was well-fitted by the pseudo-second-order kinetic and Langmuir isotherm models. Electrostatic attractions, complexation, and hydrogen bonding are the main mechanisms governing the TTC removal process. Desorption tests demonstrated that the (NH4)2HPO4 solution was the most effective desorbing agent. The developed composites were more efficient than DCPD and DCPA reference samples and could be used as valuable adsorbents of TTC from contaminated wastewater.

Efficient removal of tetracycline in water using modified eggplant straw biochar supported green nanoscale zerovalent iron: synthesis, removal performance, and mechanism

A novel NaOH modified eggplant straw biochar supported green nanoscale zerovalent iron (P-nZVI/ESBC) composite was synthesized and its removal performance and reaction mechanism for tetracycline (TC) in water were investigated. Multiple characterizations showed that the prepared P-nZVI/ESBC composite contained oxygen-containing functional groups (hydroxyl, carbonyl, and carboxyl groups) and Fe species (nZVI and its oxides). The dosage of composite, temperature, and solution pH significantly affected the removal capacity of the P-nZVI/ESBC composite for TC. The Avrami fraction-order kinetic model and Sips adsorption isotherm model can fit well the removal process of TC by the P-nZVI/ESBC composite, indicating that the adsorption behavior of TC involved multiple adsorption mechanisms and chemical adsorption might occur. The maximum adsorption capacity of the P-nZVI/ESBC composite for TC was 304.62 mg g-1. The adsorption and reductive degradation were the dominant mechanisms of TC removal by the P-nZVI/ESBC composite. This work offers abundant information on the application of eggplant straw to manufacture biochar-based composites for the efficient removal of antibiotic contaminants from aquatic environments.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Effect mechanism of iron conversion on adsorption performance of hydrochar derived from coking sludge

In this study, Fe conversion during hydrothermal carbonization (HTC) of coking sludge were investigated, and the effect mechanism of Fe component on the adsorption performance of coking sludge hydrochar (CHC) was explored. The results showed that after HTC treatment, more than 95 % of Fe remained in the CHC. Fe3+ was reduced to Fe2+ by sugar and amino acids. Fe was stabilized during the HTC process and was still predominantly in the Fe manganese oxidation state. The CHC prepared at 270 °C exhibited excellent adsorption capacities for Congo red (CR), tetracycline (TC), and Cr (VI). Their maximum adsorption capacities were 140.85, 147.06, and 19.92 mg/g, respectively. Quantitative adsorption mechanism experiments, XRD and VSM characterization revealed that Fe component played a significant role in adsorption, and CHC with more Fe3O4 exhibited better adsorption capacity. The results of the XPS characterization of CHC before and after adsorption showed that Fe3O4 provided rich Fe adsorption sites on the surface of CHC to strengthen the adsorption efficiency of pollutants through Fe3+/Fe2+ reduction and complexation of Fe-O/N. In addition, the formed Fe3O4 also imparted CHC with magnetic properties (Ms = 4.12 emu/g) to facilitate the subsequent separation and recovery. These results demonstrated that the prepared CHC has great potential for treating actual wastewater containing CR and TC.

Evaluation of activated pyrochar for boosting anaerobic digestion: Performances and microbial community

In this study, the effects of CO2-activated/non-activated pyrochars (PCs) from cornstalk, cotton straw, and rice straw on anaerobic digestion (AD) performances and microbial characteristics were investigated. The maximum biogas production rate (2.2 L/L/d) with a methane content of 73% was obtained from the AD with CO2-activated cotton straw PC. The activated PC mainly played a strengthening role in the early and middle stages of AD. Specifically, the cornstalk PC could greatly relieve acid inhibition, and cotton straw PC had a significantly positive effect on the regulation of ammonia nitrogen concentration. The rare genera like Verrucomicrobia had obvious differences among groups of AD with PCs. Regarding differential metabolites, cornstalk PC-N2 displayed a positive correlation with isoleucyl-alanine, while exhibiting a negative correlation with deoxyinosine, and the corresponding relative expression levels were + 3.0 and -2.4, respectively. Overall, gas-activated PCs could promote methane production and affect the composition of microbial community.

Hydrothermal conversion of biomass to fuels, chemicals and materials: A review holistically connecting product properties and marketable applications

Biomass is a renewable and carbon-neutral resource with good features for producing biofuels, biochemicals, and biomaterials. Among the different technologies developed to date to convert biomass into such commodities, hydrothermal conversion (HC) is a very appealing and sustainable option, affording marketable gaseous (primarily containing H₂, CO, CH₄, and CO₂), liquid (biofuels, aqueous phase carbohydrates, and inorganics), and solid products (energy-dense biofuels (up to 30 MJ/kg) with excellent functionality and strength). Given these prospects, this publication first-time puts together essential information on the HC of lignocellulosic and algal biomasses covering all the steps involved. Particularly, this work reports and comments on the most important properties (e.g., physiochemical and fuel properties) of all these products from a holistic and practical perspective. It also gathers vital information addressing selecting and using different downstream/upgrading processes to convert HC reaction products into marketable biofuels (HHV up to 46 MJ/kg), biochemicals (yield >90 %), and biomaterials (great functionality and surface area up to 3600 m²/g). As a result of this practical vision, this work not only comments on and summarizes the most important properties of these products but also analyzes and discusses present and future applications, establishing an invaluable link between product properties and market needs to push HC technologies transition from the laboratory to the industry. Such a practical and pioneering approach paves the way for the future development, commercialization and industrialization of HC technologies to develop holistic and zero-waste biorefinery processes.

Hydrogen Peroxide/Phosphoric Acid Modification of Hydrochars for Sulfamethoxazole and Carbamazepine Adsorption: The Role of Oxygen-Containing Functional Groups

Emerging pollutants, such as sulfonamide antibiotics and pharmaceuticals, have been widely detected in water and soils, posing serious environmental and human health concerns. Thus, it is urgent and necessary to develop a technology for removing them. In this work, a hydrothermal carbonization method was used to prepare the hydrochars (HCs) by pine sawdust with different temperatures. To improve the physicochemical properties of HCs, phosphoric acid (H₃PO₄) and hydrogen peroxide (H₂O₂) were used to modify these HCs, and they were referred to as PHCs and HHCs, respectively. The adsorption of sulfamethoxazole (SMX) and carbamazepine (CBZ) by pristine and modified HCs was investigated systematically. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicated that the H₂O₂/H₃PO₄ modification led to the formation of a disordered carbon structure and abundant pores. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy results suggested that carboxyl (-COOH) and hydroxyl (-OH) functional groups of HCs increased after modification, which is the main reason for the higher sorption of SMX and CBZ on H₃PO₄/H₂O₂-modified HCs when compared with pristine HCs. In addition, the positive correlation between -COOH/C=O and logK_d of these two chemicals also suggested that oxygen-containing functional groups played a crucial role in the sorption of SMX and CBZ. The strong hydrophobic interaction and π-π interaction between CBZ and pristine/modified HCs resulted in its higher adsorption when compared with SMX. The results of this study provide a novel perspective on the investigation of adsorption mechanisms and environmental behaviors for organic contaminants by pristine and modified HCs.

Interactions between Cr(VI) and the hydrochar: The electron transfer routes, adsorption mechanisms, and the accelerating effects of wood vinegar

Conversion of the low-valued invasive plant biomass into high-grade carbonaceous materials may provide a novel strategy to tackle the global issues of climate changes and exotic plant invasion. In this study, the hydrochar was fabricated from the biomass of Eupatorium adenophorum spreng. via hydrothermal carbonization (HTC) process to remove Cr(VI). The adsorption thermodynamics and kinetics were investigated via batch experiments, and the electron transfer routes and adsorption mechanisms were further revealed based on systematic characterization. The adsorption isotherms were well fitted by the Langmuir model with a maximum adsorption amount of 7.76 mg/g. The adsorption was spontaneous, and the surface adsorption and intraparticle diffusion may be the speed-limiting steps. Both -OH group and furan structures may donate the electrons to reduce Cr(VI), and the adsorption was governed by the surface complexation with the oxygen-containing functional groups including hydroxyl and carboxyl. Furthermore, the wood vinegar, as the by-product, can significantly accelerate the reduction rate of Cr(VI). Thus, this study provided a new strategy to fabricate carbonaceous materials which may facilitate to boost the carbon neutrality and control of invasive plants.

A review on hydrothermal carbonization of potential biomass wastes, characterization and environmental applications of hydrochar, and biorefinery perspectives of the process

It is imperative to search for appropriate processes to convert wastes into energy, chemicals, and materials to establish a circular bio-economy toward sustainable development. Concerning waste biomass valorization, hydrothermal carbonization (HTC) is a promising route given its advantages over other thermochemical processes. From that perspective, this article reviewed the HTC of potential biomass wastes, the characterization and environmental utilization of hydrochar, and the biorefinery potential of this process. Crop and forestry residues and sewage sludge are two categories of biomass wastes (lignocellulosic and non-lignocellulosic, respectively) readily available for HTC or even co-hydrothermal carbonization (Co-HTC). The temperature, reaction time, and solid-to-liquid ratio utilized in HTC/Co-HTC of those biomass wastes were reported to range from 140 to 370 °C, 0.05 to 48 h, and 1/47 to 1/1, respectively, providing hydrochar yields of up to 94 % according to the process conditions. Hydrochar characterization by different techniques to determine its physicochemical properties is crucial to defining the best applications for this material. In the environmental field, hydrochar might be suitable for removing pollutants from aqueous systems, ameliorating soils, adsorbing atmospheric pollutants, working as an energy carrier, and performing carbon sequestration. But this material could also be employed in other areas (e.g., catalysis). Regarding the effluent from HTC/Co-HTC, this byproduct has the potential for serving as feedstock in other processes, such as anaerobic digestion and microalgae cultivation. These opportunities have aroused the industry interest in HTC since 2010, and the number of industrial-scale HTC plants and patent document applications has increased. The hydrochar patents are concentrated in China (77.6 %), the United States (10.6 %), the Republic of Korea (3.5 %), and Germany (3.5 %). Therefore, considering the possibilities of converting their product (hydrochar) and byproduct (effluent) into energy, chemicals, and materials, HTC or Co-HTC could work as the first step of a biorefinery. And this approach would completely agree with circular bioeconomy principles.

Cow Dung-Based Biochar Materials Prepared via Mixed Base and Its Application in the Removal of Organic Pollutants

Cow dung (CD) is a waste product of livestock production. Improper disposal of a large amount of CD will cause environmental pollution. In this work, three biochar materials based on CD (BMCD) were prepared by using three types of base, including KOH, NaOH, and mixed base (MB, a mixture of equal mass NaOH and KOH) as activators to investigate the different physicochemical properties of BMCDs (BMCD-K, BMCD-Na, and BMCD-MB). The objective was to verify the effectiveness of MB activation in the preparation of biochar materials. The results show that MB has an effect on the structural characteristics of BMCDs. In particular, the surface area and total pore volume, the specific surface area, and the total pore volume of BMCD-MB (4081.1 m² g⁻¹ and 3.0118 cm³ g⁻¹) are significantly larger than those of BMCD-K (1784.6 m² g⁻¹ and 1.1142 cm³ g⁻¹) and BMCD-Na (1446.1 m² g⁻¹ and 1.0788 cm³ g⁻¹). While synthetic dye rhodamine B (RhB) and antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the adsorption performances, the maximum adsorption capacities of BMCD-K, BMCD-NA and BMCD-MB were 951, 770, and 1241 mg g⁻¹ for RhB, 975, 1051, and 1105 mg g⁻¹ for TH, respectively, which were higher than those of most adsorbents. This study demonstrated that MB can be used as an effective activator for the preparation of biochar materials with enhanced performance.

Effective adsorptive removal of atrazine herbicide in river waters by a novel hydrochar derived from Prunus serrulata bark

In this work, a novel and effective hydrochar was prepared by hydrothermal treatment of Prunus serrulata bark to remove the pesticide atrazine in river waters. The hydrothermal treatment has generated hydrochar with a rough surface and small cavities, favoring the atrazine adsorption. The adsorption equilibrium time was not influenced by different atrazine concentrations used, being reached after 240 min. The Elovich adsorption kinetic model presented the best adjustment to the kinetic data. The Langmuir model presented the greatest compliance to the isotherm data and indicated a higher affinity between atrazine and hydrochar, reaching a maximum adsorption capacity of 63.35 mg g^-1. Thermodynamic parameters showed that the adsorption process was highly spontaneous, endothermic, and favorable, with a predominance of physical attraction forces. In treating three real river samples containing atrazine, the adsorbent showed high removal efficiency, being above 70 %. The hydrochar from Prunus serrulata bark waste proved highly viable to remove atrazine from river waters due to its high efficiency and low precursor material cost.

The hydrochar activation and biocrude upgrading from hydrothermal treatment of lignocellulosic biomass

The production of hydrochar and biocrude from hydrothermal treatment of lignocellulosic biomass is getting increasing attention, but the quality of hydrochar and biocrude need further improvement before utilization. Many attempts have been carried out on the hydrochar activation and biocrude upgrading. However, different methods play different roles on the property of hydrochar and biocrude, this topic received scant attention in recent review papers. Therefore, the influence of different activation methods on hydrochar property, and the potential application of hydrochar were summarized in this study. Meanwhile, the research progress on biocrude upgrading is reported. Besides, the techno-economic analysis of hydrochar and biocrude from hydrothermal treatment of lignocellulosic biomass are also discussed. Finally, the research needs and future directions on hydrochar activation and biocrude upgrading were proposed. This paper could provide insights for further studies on the utilization of hydrochar and biocrude.

Phytotoxicity and nutrition behavior of process water obtained from the hydrothermal carbonization of poultry litter and its effect on lettuce germination and growth

Nine hydrothermal carbonization process waters (PWs) of poultry litter were prepared at 180, 220, and 260 °C for 1, 4, and 8 h, respectively. They were characterized with pH, EC (electric conductivity), DOC (dissolved organic carbon), TN (total nitrogen), NH4+-N, NO3--N, etc. After diluted according to TN, the PWs were supplied as liquid nitrogen fertilizers and their phytotoxic and nutrition effects on lettuce germination and growth were studied. The results showed that the PWs from short time (1 h) were with low DOC/TN and DOC/NH4+-N and high NH4+-N/TN. Compared with the PWs from long time 4 and 8 h, they provided more NH4+-N and less DOC and resulted in lettuce with relatively high germination index (GI), dry biomass, and low antioxidant enzyme activities. Especially, the PW from 220 °C and 1 h significantly enhanced the dry weight by 196.3% relative to negative control of nitrogen deficiency. However, all the PWs led lettuce to an unhealthy condition, which decreased GI and the chlorophyll content and increased antioxidant enzyme activities. Furthermore, it was confirmed by linear regression that the ratios of DOC/TN, NH4+-N/TN, and DOC/NH4+-N were the determining indexes for evaluating the phytotoxicity and nutrition behavior of the PWs as liquid nitrogen fertilizers.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Tuning oxygenated functional groups on biochar for water pollution control: A critical review

Biochar has attracted increasing attention in water pollution control, attributed to its various merits, e.g., tunable physico-chemical properties. The oxygenated functional groups (OFGs) on biochar are key active sites for removing pollutants from water through interfacial adsorption/redox reaction. However, there is still a lack of comprehensive knowledge and perspective on tuning OFGs on biochar for enhanced performance in water pollution control. Here, this review highlighted the mechanisms of biochar OFGs in water pollution control, analyzed the strategies and mechanisms for tuning OFGs on biochar, and investigated the performances of biochars with tuned OFGs in removing inorganic/organic pollutants via adsorption/redox reactions. Specifically, strategies for tuning OFGs on biochar are far more than the well-recognized ex-situ oxidation of pristine biochar. These strategies include in-situ low temperature preservation of hydroxyl and carboxyl, in-/ex-situ oxidation of biochar, and in-/ex-situ grafting of carboxyl on biochar via cycloaddition/acylation reaction. The resultant biochars showed enhanced performances in adsorption (mainly mediated by hydroxyl, carboxyl and ketone through surface complexation, H-bonding, and electrostatic attraction) and redox reaction (mainly mediated by redox-active hydroxyl and ketone). Finally, this review presented future directions on developing biochar with specially tuned surface OFGs as a sustainable high-performance adsorbent/carbocatalyst for water pollution control.

Preparation of mesoporous batatas biochar via soft-template method for high efficiency removal of tetracycline

In this contribution, we apply a soft-template-assisted hydrothermal route using polyethylene-polypropylene glycol (F127) as soft-template agent and biomass batatas as carbon precursor to synthesis a novel hydrothermal mesoporous biochar (HMC-800) for adsorptive removal of tetracycline (TC) from wastewater. We use the biochar prepared without F127 and direct pyrolytic biochar for comparison. The physicochemical properties of all the studied biochar samples are measured using a suite of characterization techniques. Our results show that the HMC-800 displays the highest specific surface area (286.3 m²/g) and total pore volume (0.249 cm³/g), manifesting the introduction of F127 can result in formation of well-developed pore structures. Regarding adsorption properties, the HMC-800 outperforms other biochar samples for TC removal. Our finding shows that solution with near-neutral pH is favorable for TC removal, and the highest adsorption capacity is observed at initial solution pH value 7. In addition, our findings show that applying the pseudo-second-order kinetic and Freundlich isotherm equation closely models the recorded adsorption behavior. The maximum adsorption capacity is measured to be as much as 238.7 mg/g by Langmuir isotherm model. Pore filling, hydrogen-bonding and n-π interaction are suggested to be the prevailing adsorption mechanisms compared to the other mechanisms. Furthermore, the HMC-800 performs better in regeneration and reuse experiments, making it a promising adsorbent material for TC removal from wastewater.

Facile activation of sludge-based hydrochar by Fenton oxidation for ammonium adsorption in aqueous media

Lately, there has been a growing interest in converting low-cost biomass residuals, including wastewater sludge, into char-like materials for various applications. In this research, ammonium (NH₄⁺) adsorption and desorption potential of hydrochar activated via Fenton oxidation were systematically investigated. Hydrochar was prepared from domestic wastewater treatment plant sludge and activated by Fenton oxidation using different H₂O₂ concentrations, H₂O₂/Fe²⁺ ratios, and activation times. The activated hydrochars (AHs) were characterized by ATR-FTIR, high-resolution XPS, BET specific surface area, and SEM, and their NH₄⁺ adsorption capacity was analyzed. The NH₄⁺ adsorption isotherms and kinetics, adsorption in the presence of competing ions (with and without humic acid), and NH₄⁺ desorption were investigated. The results show that following hydrochar activation, the acidic groups' concentration and the BET surface area increased, but the morphology remained essentially unchanged. It was also found that the activation occurs within a few minutes when using a relatively low concentration of reagents, and without extensive post-treatment steps. The NH₄⁺ adsorption onto AH at equilibrium fitted the Langmuir isotherm model, with a maximum adsorption capacity of 30.77 mg g^-1, and the NH₄⁺ adsorption kinetics fitted the pseudo-second-order model. NH₄⁺ adsorption in the presence of competing ions decreased by up to 33 ± 3%. NH₄⁺ desorption experiments demonstrated that NH₄⁺ recovery can reach 33 ± 5% with ultrapure water and 67 ± 2% with 2 M KCl. The results of this study indicate that Fenton oxidation is a promising alternative for hydrochar activation, and can be used as an adsorbent for NH₄⁺ remediation in wastewater treatment processes.

Cotton textile waste valorization for removal of tetracycline and paracetamol alone and in mixtures from aqueous solutions: Effects of H3 PO4 as an oxidizing agent

The use of waste and by-products locally available in large quantities and at low cost as adsorbents can be considered an appropriate approach for improving waste management and protecting the environment. Cotton textile waste was used to prepare adsorbents (MC) via pyrolysis followed by a chemical modification with H₃ PO₄ . MC samples were characterized by scanning electron microscopy, FTIR spectroscopy, and N₂ adsorption-desorption isotherm. The results revealed that MC treated with 1 M H₃ PO₄ (MC₁ ) showed an excellent adsorption performance. The single and binary adsorption of tetracycline (TC) and paracetamol (Pa) onto MC₁ were studied. In a single system, TC was better adsorbed than Pa and maximum adsorption capacities q_m are 87.7 mg/g and 62 mg/g, respectively. The adsorption follows the Langmuir and pseudo-second-order kinetic models. For a binary system, the experimental data indicate that Pa (44.04 mg/g) is better adsorbed than TC (24.13 mg/g). Adsorption equilibrium data of TC and Pa evaluated by the selectivity extended-Langmuir model in which selectivity factor was introduced provided good correlation results with the binary adsorption data. Cotton textile waste is potentially promising for the preparation of effective adsorbents for the removal of pharmaceutical residues in aqueous solutions. PRACTITIONER POINTS: Valorization of cotton textile waste into adsorbents. Adsorbents were prepared by pyrolysis at 600°C followed by chemical modification in the presence of H₃ PO₄ . Removal of tetracycline (TC) and paracetamol (Pa) alone or in mixtures by adsorption. Adsorbent showed high-capacity adsorption of the TC and Pa even in a mixture from solutions at low concentrations. The Langmuir and selectivity extended-Langmuir models describe the adsorption of TC and Pa alone and in mixtures, respectively.

The removal of tetracycline from water using biochar produced from agricultural discarded material

An issue of significant importance worldwide is the contamination of water with antibiotics giving rise to antibiotic resistance in the environment. Antibiotics such as tetracycline are widely used in agriculture, as such they can pollute water courses, providing a means by which environmental bacteria can evolve antibiotic resistance genes. Biochar can form part of a solution as it is a well-known adsorbent. This material can be efficient in the adsorption of a wide range of pollutants and is inexpensive. An innovative heat pipe reactor was used to produce biochar from excess food and garden materials. This biochar was characterised using scanning electron microscopy with energy dispersive X-ray analyser (SEM-EDAX), Fourier transform infrared (FTIR) spectroscopy and Raman spectroscopy. The biochar produced had an adsorption capacity between 2.98 mg/g and 8.23 mg/g for initial tetracycline concentrations of 20 mg/l and 100 mg/l, respectively. The Freundlich isotherm provided the best fit to the experimental data. Kinetics examination revealed a rapid adsorption of tetracycline during the initial stages. The Elovich equation fitted the experimental data well. This adsorbent could therefore be produced at the site of an agricultural enterprise through the pyrolysis of agriculture waste and then used to reduce the infiltration of antibiotics into the environment.

Enhanced adsorption of tetracycline by an iron and manganese oxides loaded biochar: Kinetics, mechanism and column adsorption

A Fe/Mn oxides loaded biochar (FeMn-BC) was prepared to enhance the adsorption of tetracycline (TC). γ-Fe₂O₃ and MnO₂ were assigned to the Fe and Mn oxides, respectively. The enhanced adsorption of TC was dominated by the loaded γ-Fe₂O₃ and MnO₂. According to Akaike-Information-Criteria evaluation, Elovich kinetic and Langmuir isotherm models could best describe the adsorption with a maximum capacity of 14.24 mg/g. During adsorption process, the γ-Fe₂O₃ and MnO₂ hydrolyzed into hydroxides (FeOOH and MnOOH) which acted as bases to complex with TC^2- ion under alkaline condition (pH = 11). After the adsorption, the concentrations of leached Fe and Mn could meet the requirements PRC standards GB13456-2012 and GB8978-1996, respectively. The FeMn-BC had ~24% on TC removal (initial concentration of 20 mg/L) after four-cycles regeneration. The FeMn-BC was also available for TC adsorptions in column tests and actual wastewater.

Bridging the gap to hydrochar production and its application into frameworks of bioenergy, environmental and biocatalysis areas

Hydrothermal carbonization (HTC) is a facile, low-cost and eco-friendly thermal conversion process that has recently gained attention with a growing number of publications (lower 50 in 2000 to over 1500 in 2020). Despite being a promising technology, problems such as operational barriers, complex reaction mechanisms and scaling have to be solved to make it a commercial technology. To bridge this current gap, this review elaborates on the chemistry of the conversion of lignocellulosic biomass. Besides, a comprehensive overview of the influence of the HTC operational conditions (pH, temperature, water:biomass ratio, residence time and water recirculation) are discussed to better understand how hydrochar with desired properties can be efficiently produced. Large-scale examples of the application of HTC are also presented. Current applications of hydrochar in the fields of energy, biocatalysis and environment are reviewed. Finally, economic cost and future prospects are analyzed.